Samsung S27A750D, S23A750D User Manual

User Manual

SyncMaster

S23A750D / S27A750D

The color and the appearance may differ depending on

the product, and the specifications are subject to

change without prior notice to improve the performance.

BN46-00036A-05

Copyright

The contents of this manual are subject to change without notice to improve quality.

Samsung Electronics owns the copyright for this manual.

Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is

prohibited.

The SAMSUNG and SyncMaster logos are registered trademarks of Samsung Electronics.

Microsoft and Windows are registered trademarks of Microsoft Corporation.

Before Using the Product

2011 Samsung Electronics

VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.

z An administration fee may be charged if either

 (a) an engineer is called out at your request and there is no defect in the product

(i.e. where you have failed to read this user manual)

 (b) you bring the unit to a repair centre and there is no defect in the product

(i.e. where you have failed to read this user manual).

z The amount of such administration charge will be advised to you before any work or home visit

is carried out.

Icons used in this manual

The following images are for reference only. Real-life situations may differ from what is shown in the images.

Symbols for safety precautions

Warning

Caution

A serious or fatal injury may result if instructions are not followed.

Personal injury or damage to properties may result if instructions are not followed.

Before Using the Product

Activities marked by this symbol are prohibited.

Instructions marked by this symbol must be followed.

Before Using the Product

Cleaning

Before Using the Product

Cleaning

Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.

Take the following steps when cleaning.

1. Power off the monitor and computer.

2. Disconnect the power cord from the monitor.

Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric shock may result.

3. Wipe the monitor with a clean, soft and dry cloth.

z Do not apply a cleaning agent that contains alcohol,

solvent, or surfactant to the monitor.

z Do not spray water or detergent directly on the product.

4. Wet a soft and dry cloth in water and wring thoroughly to clean the exterior of the monitor.

5. Connect the power cord to the product after cleaning the product.

6. Power on the monitor and computer.

Before Using the Product

10 cm

10 cm 10 cm

Securing the Installation Space

z Ensure some space around the product for ventilation.An internal temperature rise may cause fire

and damage the product. Be sure to allow the amount of space as shown below or greater when installing the product.

The exterior may differ depending on the product.

Precautions for storage

High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used

nearby.

Be sure to contact Samsung Customer Service Center (page 79) if the inside of the monitor needs cleaning. (service fee will be charged).

Safety Precautions

Electricity and Safety

The following images are for reference only. Real-life situations may differ from what is shown in the images.

Before Using the Product

Warning

Do not use a damaged power cord or plug, or a loose power socket.

z An electric shock or fire may result.

Do not plug many products into the same power socket.

z Otherwise, the socket may overheat and cause a fire.

Do not touch the power plug with wet hands.

z Otherwise, an electric shock may result.

Insert the power plug all the way in so it is not loose.

z An unstable connection may cause a fire.

Connect the power plug to a grounded power socket (type 1 insulated devices only).

z An electric shock or injury may result.

Do not bend or pull the power cord with force. Do not weigh the power cord down with a heavy object.

z A damaged power cord may cause an electric shock or fire.

Do not place the power cord or product near heat sources.

z An electric shock or fire may result.

Remove foreign substances such as dust around the plug pins and power socket with a dry cloth.

z Otherwise, a fire may result.

Before Using the Product

Caution

Do not unplug the power cord when the product is in use.

z The product may become damaged by an electric shock.

Do not use the power cord for products other than authorized products supplied by Samsung.

z An electric shock or fire may result.

Keep the power socket where the power cord is connected unobstructed.

z If any problem occurs in the product, unplug the power cable to completely

cut the power to the product.

Installation

Warning

Power to the product cannot be completely cut off with the power button.

Hold the plug when disconnecting the power cord from the power socket.

z An electric shock or fire may result.

DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARES ON TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES.

z Otherwise, a fire may result.

Avoid installing the product in a narrow space with bad ventilation, such as a bookshelf or wall closet.

z Otherwise, a fire may result due to an increased internal temperature.

Keep the plastic packaging bag for the product in a place that cannot be reached by children.

z Children may suffocate.

Before Using the Product

Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.).

z The product may fall and break or cause a personal injury.

z Using the product in an area with excess vibration may damage the product

or cause a fire.

Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or smoke.

z An electric shock or fire may result.

Do not expose the product to direct sunlight, heat, or a hot object such as a stove.

z Otherwise, the product lifespan may be reduced, or a fire may result.

Caution

Do not install the product within the reach of young children.

z The product may fall and injure children.

Edible oil, such as soybean oil, can damage or deform the product. Do not install

the product in a kitchen or near a kitchen counter.

Take care not to drop the product when moving it.

z Otherwise, product failure or personal injury may result.

Do not set down the product on its front.

z The screen may become damaged.

When installing the product on a cabinet or shelf, make sure that the bottom edge of the front of the product is not protruding.

z The product may fall and break or cause a personal injury.

z Install the product only on cabinets or shelves of the right size.

Before Using the Product

SAMSUNG

Put down the product carefully.

z The product may fall and break or cause a personal injury.

Installing the product in an unusual place (a place exposed to a lot of fine particles, chemical substances or extreme temperatures, or an airport or train station where the product should operate continuously for an extended period of time) may seriously affect its performance.

z Be sure to consult Samsung Customer Service Center (page 79) before

installation if you want to install the product at such a place.

Operation

Warning

High voltage runs through the product. Do not attempt to disassemble, repair, or modify the product on your own.

z An electric shock or fire may result.

z Contact Samsung Customer Service Center (page 79) for repair.

Before moving the product, turn off the power switch and disconnect the power cable and all other connected cables.

z Otherwise, the power cord may be damaged and a fire or electric shock may

result.

If the product generates a strange noise, a burning smell, or smoke, remove the power cord immediately and contact Samsung Customer Service Center (page

79).

z An electric shock or fire may result.

Do not let children hang from the product or climb on top of it.

z The product may fall, and your child may become injured or seriously

harmed.

If the product falls or the exterior is damaged, power off the product, remove the power cord, and contact Samsung Customer Service Center (page 79).

z Otherwise, an electric shock or fire may result.

Do not put a heavy object, toy, or sweets on top of the product.

z The product or heavy objects may fall as children try to reach for the toy or

sweets resulting in a serious injury.

Before Using the Product

GAS

100

During a lightning or thunderstorm, power off the product and remove the power cable.

z An electric shock or fire may result.

Do not drop objects on the product or apply impact.

z An electric shock or fire may result.

Do not move the product by pulling the power cord or any cable.

z Otherwise, the power cable may be damaged and product failure, an electric

shock or fire may result.

If a gas leakage is found, do not touch the product or power plug. Also, ventilate the area immediately.

z Sparks can cause an explosion or fire.

Do not lift or move the product by the power cord or any cable.

z Otherwise, the power cable may be damaged and product failure, an electric

shock or fire may result.

Do not use or keep combustible spray or an inflammable substance near the product.

z An explosion or fire may result.

Ensure the vents are not blocked by tablecloths or curtains.

z Otherwise, a fire may result from an increased internal temperature.

Do not insert a metallic object (a chopstick, coin, hair pin, etc.) or inflammable object (paper, match, etc.) into the vent or ports of the product.

z If water or any foreign substance enters the product, be sure to power off the

product, remove the power cord, and contact Samsung Customer Service Center (page 79).

z Product failure, an electric shock or fire may result.

Do not place objects containing liquid (vases, pots, bottles, etc) or metallic objects on top of the product.

z If water or any foreign substance enters the product, be sure to power off the

product, remove the power cord, and contact Samsung Customer Service Center (page 79).

z Product failure, an electric shock or fire may result.

Before Using the Product

-_-

Caution

Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels.

z If you are not going to use the product for an extended period of time,

activate power-saving mode or a moving-picture screen saver.

Disconnect the power cord from the power socket if you do not plan on using the product for an extended period of time (vacation, etc).

z Otherwise, a fire may result from accumulated dust, overheating, an electric

shock, or electric leakage.

Use the product at the recommended resolution and frequency.

z Your eyesight may deteriorate.

Do not put DC power adapters together.

z Otherwise, a fire may result.

Remove the plastic bag from the DC power adapter before you use it.

z Otherwise, a fire may result.

Do not let water enter the DC power device or get the device wet.

z An electric shock or fire may result.

z Avoid using the product outdoors where it can be exposed to rain or snow.

z Be careful not to get the DC power adapter wet when you wash the floor.

Do not put the DC power adapter near to any heating apparatus.

z Otherwise, a fire may result.

Keep the DC power adapter in a well-ventilated area.

Looking at the screen too close for an extended period of time can deteriorate your eyesight.

Before Using the Product

Do not hold the monitor upside-down or move it by holding the stand.

z The product may fall and break or cause a personal injury.

Do not use humidifiers or stoves around the product.

z An electric shock or fire may result.

Rest your eyes for more than 5 minutes for every 1 hour of product use.

z Eye fatigue will be relieved.

Do not touch the screen when the product has been turned on for an extended period of time as it will become hot.

Store the small accessories used with the product out of reach of children.

Exercise caution when adjusting the product angle or stand height.

z Otherwise, children's fingers or hands may become stuck and injured.

z Tilting the product excessively may cause it to fall and result in personal

injury.

Do not place heavy objects on the product.

z Product failure or personal injure may result.

Before Using the Product

50 cm

Correct posture to use the product

Use the product in the correct posture as follows:

z Straighten your back.

z Allow a distance of 45 to 50cm between your eye and the screen, and look slightly

downward at the screen.

Keep your eyes directly in front of the screen.

z Adjust the angle so light does not reflect on the screen.

z Keep your forearms perpendicular to your upper arms and level with the back of

your hands.

z Keep your elbows at about a right angle.

z Adjust the height of the product so you can keep your knees bent at 90 degrees or

more, your heels attached to the floor, and your arms lower than your heart.

Before Using the Product

BEFORE USING THE

PRODUCT

PREPARATIONS 19 Checking the Contents

2 Copyright

2 Icons used in this manual 2 Symbols for safety precautions

4 Cleaning

4 Cleaning 5 Securing the Installation Space 5 Precautions for storage

5 Safety Precautions

5 Electricity and Safety 7 Installation 9Operation

13 Correct posture to use the product

19 Removing the Packaging 20 Checking the Components

21 Parts

21 Frontal Buttons 23 Reverse Side 23 Tidying Up the Connected Cables 24 Kensington Lock 25 Adjusting the Product Tilt

3D 26 3D

26 3D Mode 27 L/R Change

28 3D → 2D

29 Standard HDMI-Compatible Formats

29 Resolution Supported for PC Input (via

the HDMI Port)

29 Playing 3D Games on a PC

30 Precautions when Viewing 3D Video

Table Of Contents

CONNECTING AND USING

A SOURCE DEVICE

SCREEN SETUP 37 MAGIC

31 Before Connecting

31 Pre-connection Checkpoints

31 Connecting the Power

32 Connecting and Using a PC

32 Connecting to a PC 33 Driver Installation 34 Setting Optimum Resolution 34 Changing the Resolution Using a PC

36 Connecting to a Video Device

36 Connection Using the HDMI Cable

36 Connecting Headphones

37 SAMSUNG MAGIC Angle 38 SAMSUNG MAGIC Bright 39 Configuring SAMSUNG MAGIC Color

40 Brightness

40 Configuring Brightness

40 Contrast

41 Configuring Contrast

41 Sharpness

41 Configuring Sharpness

42 Response Time

42 Configuring Response Time

42 HDMI Black Level

CONFIGURING TINT 44 Red

44 Configuring Red

44 Green

44 Configuring Green

Table Of Contents

45 Blue

45 Configuring Blue

45 Color Tone

46 Configuring the Color Tone Settings

47 Gamma

47 Configuring Gamma

RESIZING OR

RELOCATING THE

SCREEN

48 Size

48 Changing the Image Size

49 H-Position

49 Configuring H-Position

49 V-Position

49 Configuring V-Position

50 Menu H-Position

50 Configuring Menu H-Position

50 Menu V-Position

51 Configuring Menu V-Position

SETUP AND RESET 52 ECO

52 Eco Motion Sensor 53 Eco Light Sensor 55 Eco Saving 56 Eco Icon Display

58 Menu Transparency

58 Changing Menu Transparency

58 Language

58 Changing the Language

59 PC/AV Mode

59 Configuring PC/AV Mode Settings

60 Auto Source

60 Configuring Auto Source

Table Of Contents

60 Display Time

60 Configuring Display Time

61 Key Repeat Time

61 Configuring Key Repeat Time

62 Customized Key

62 Configuring Customized Key

62 Off Timer On/Off

62 Configuring Off Timer On/Off

63 Off Timer Setting

63 Configuring Off Timer Setting

INFORMATION MENU AND

OTHERS

TROUBLESHOOTING

GUIDE

64 Reset

64 Initializing Settings (Reset)

65 INFORMATION

65 Displaying INFORMATION

65 Configuring Brightness in the Startup

Screen

65 Configuring Volume in the Startup

Screen

67 Requirements Before Contacting

Samsung Customer Service Center

67 Testing the Product 67 Checking the Resolution and Frequency 67 Check the followings.

70 Q & A

SPECIFICATIONS 72 General

73 PowerSaver

75 Standard Signal Mode Table

Table Of Contents

APPENDIX

INDEX

79 Contact SAMSUNG WORLDWIDE

84 Correct Disposal of This Product (Waste

Electrical & Electronic Equipment) Europe only

85 Terminology

Table Of Contents

Preparations

1.1 Checking the Contents

1.1.1 Removing the Packaging

1 Open the packaging box. Be careful not to damage the product when you open the packaging with

a sharp instrument.

2 Remove the Styrofoam from the product.

3 Check the components and remove the Styrofoam and plastic bag.

z The appearance of actual components may differ from the image shown.

z This image is for reference only.

4 Store the box in a dry area so that it can be used when moving the product in the future.

1 Preparations

Preparations

1.1.2 Checking the Components

z Contact the dealer from whom you purchased the product if any item is missing.

z The appearance of the components and items sold separately may differ from the image shown.

Components

Quick Setup guide Warranty

(Not available In some locations)

Cleaning cloth Power cable DC power adapter

3D Glasses & 3D Glasses

User Manual

z Components may differ in different locations.

z The cleaning cloth is only supplied with the black high-glossy model.

DP cable Wire holders

User Manual

1 Preparations

Preparations

1.2 Parts

1.2.1 Frontal Buttons

The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.

z If the MENU button is not visible, lightly tap the area around the [ ] button. The MENU button will

become visible.

z The onscreen display menu only appears when the MENU button light is lit.

z The button light will remain on for 10 seconds and then dim.

1 Preparations

→

Preparations

Icons Description

z Open or close the onscreen display (OSD) menu, or return to the last

menu.

z OSD control lock: Maintain the current settings, or lock the OSD

control to prevent unintended changes to settings.

To lock the OSD control, press the MENU button [ ] for five

seconds.

To unlock the locked OSD control, press the MENU button [ ] for

more than five seconds.

If the OSD control is locked,

z Brightness, Contrast and 3D can be adjusted, and

INFORMATION can be viewed.

The function that was configured as Customized Key before

locking the OSD control can be used by pressing the [ ] button.

Confirm a menu selection.

Pressing the [ ] button when the OSD menu is not displayed will change the input source (HDMI/DP). If you power on the product or

change the input source by pressing the [ ] button, a message that shows the changed input source will appear at the top left corner of the screen.

Move to the upper or lower menu or adjust the value for an option on the OSD menu.

Move to the left or right menu or adjust the value for an option on the OSD menu.

Configure Customized Key and press [ ]. The following options will be enabled.

3D - ECO - MAGIC - Image Size

To configure Customized Key, go to SETUP&RESET

Customized Key and select the mode you want

Turn the screen on or off.

The power indicator will be lit when the product is operating normally.

z This is a touch-type button. Tap the button lightly with a finger.

z Refer to "10.2 PowerSaver" for details about the power-saving

function.

z To reduce power consumption, it is best to remove the power

cable when you will not be using the product for an extended period of time.

1 Preparations

DP IN

POWER

HDMI IN

Preparations

1.2.2 Reverse Side

The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.

Port Description

Connects to a source device using an DP cable.

Connects to a source device using an HDMI cable.

Connects to an audio output device such as headphones.

Connects to the DC power adapter.

1.2.3 Tidying Up the Connected Cables

Tidy up the cables using the cable holder on the back of the stand.

1 Preparations

Preparations

The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.

1.2.4 Kensington Lock

An anti-theft lock allows you to use the product securely even in public places.

The locking device shape and locking method depend on the manufacturer. Refer to the user guide

provided with your anti-theft locking device for details.

To lock an anti-theft locking device:

1 Fix the cable of your anti-theft locking device to a heavy object

such as a desk.

2 Put one end of the cable through the loop on the other end. 3 Insert the Kensington Lock into the security slot on the back of the

display.

4 Lock the locking device.

z An anti-theft locking device can be purchased separately.

z Refer to the user guide provided with your anti-theft locking

device for details.

z You can purchase the locking device from an electronics store

or an online shop.

1 Preparations

20°

Preparations

1.2.5 Adjusting the Product Tilt

The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.

z You can adjust the tilt of your monitor.

z Hold the lower part of the product and adjust the tilt carefully.

1 Preparations

2.1 3D

This feature allows you to view 3D content such as 3D movies. You can view 3D content using (SyncMaster-dedicated) Samsung 3D glasses.

z You can purchase "SyncMaster-dedicated 3D glasses (model name: SSG-M3750CR)" separately.

Contact the dealer you purchased the product from for details about purchasing the 3D glasses.

z The product may not be compatible with 3D glasses other than the model specified above.

z Power off the 3D glasses if you will not be using them. Otherwise, the battery life will decrease.

z When you configure the display settings initially, change the frequency to 120Hz using the display

settings menu on the Windows desktop.

*System requirements to play 3D PC games

Basic Video Signal

If an AMD HD5000 series

graphics card or higher is used

Other graphics cards, such as

an nVIDIA graphics card or a

graphics card lower than AMD

HD5000 series

Recommen

ded

connection

HDMI

Display images in

FullHD Real 120Hz

mode

Display images in

Side-by-side 60Hz

mode

Operating

systems

supported

Windows 7,

Vista

Windows 7,

Vista, XP

Important Health and Safety Information about Watching 3D Content

Warning. Please read the following safety information carefully before you use the 3D function.

z Some viewers may experience dizziness, nausea or headaches when viewing 3D video. If this

occurs, stop viewing 3D video immediately, take off the 3D glasses, and rest.

z Viewing 3D video for an extended period of time may cause eye fatigue. If you experience eye

fatigue, stop viewing 3D video, take off the 3D glasses, and rest.

z Children must be constantly monitored by adults when using the 3D function. If your child shows

any symptom such as eye fatigue, headache, dizziness, or nausea, stop the child from watching 3D video immediately to rest.

Recomme

nded

z Do not use the 3D glasses for other purposes such as general eyeglasses, sunglasses, protective

goggles, etc.

z Do not use the 3D function or 3D glasses while moving. You may trip or fall and become injured.

2.1.1 3D Mode

Select the appropriate mode for the video input, and view 3D video.

Put on the 3D glasses, and select whichever 3D mode that offers the best 3D effect from 3D Mode.

2 3D

Return EnterMove

Off  Frame Sequential Top-Bottom Side-by-Side



  :

L/R Change →2D

→

Configuring the 3D Mode

1 Press [ ] on the product. 2 Press [ ] to move to PICTURE and press [ ] on the product. 3 Press [ ] to move to 3D and press [ ] on the product. 4 Press [ ] to move to 3D Mode and press [ ] on the product. The following screen will appear.

z Off: Disable the 3D Mode function.

z 2D 3D: Converts a normal video to 3D video.

z Frame Sequential: Display the left and right images alternately in each frame.

z Top Bottom: Display the top and bottom images overlapping each other to allow you to

experience the 3D effect.

z Side-By-Side: Display the left and right images overlapping each other to allow you to

experience the 3D effect.

5 Press [ ] to move to the option you want and press the [ ]. 6 The selected option will be applied.

2.1.2 L/R Change

Switch the left image to the right image, and vice versa.

Configuring the L/R Change

1 Press [ ] on the product. 2 Press [ ] to move to PICTURE and press [ ] on the product. 3 Press [ ] to move to 3D and press [ ] on the product.

2 3D

+ 61 hidden pages