14 cu. ft. BESPOKE Flex™ Column Refrigerator
MODEL RR14T7414 DIMENSIONS
Be sure your new fridge will t
Don’t wait until delivery to be sure your new refrigerator will t –
throughout your kitchen, garage and all doorways. This guide includes all
pertinent measurements and clearances so you can buy with condence.
WIDTH
23 3/8”
2”
min.
TOP OF FREEZER WITH DOOR OPEN
92°
1/2”
min.
DEPTH
DOOR
22 7/8”
WITHOUT
DEPTH
WITHOUT
HANDLE
24 1/2”
DEPTH
TO DOOR
HANDLE
27 1/8”
HEIGHT
WITH
HINGES
AND DOOR
73”
25 1/2”
Measure height
including ooring.
Be sure to allow
for hinge clearance
height if needed.
Measure width
including countertop
overhang.
Measure depth
including molding
or trim.
2 1/4”
Installation clearances
3 Allow 2” minimum clearance at rear for proper air
circulation and water/electrical connections.
3 Allow a ⅜” minimum clearance at sides and top
for ease of installation.
For optimal usage and ability to open refrigerator doors
completely, do not install next to a wall.
Please note: The above dimension and cutout information is for planning
purposes only. For complete installation details, consult manual packed
with product or download manual online at samsung.com.
Walk the delivery route
3 Identify the narrowest opening that the appliance will travel through, from outside the home to the location where it will be installed.
3 Appliance depth or width must be smaller than the width of the narrowest opening.
Loading...