Samsung RFG238AARS/XAA-02, RFG238AARS/XAA-01, RFG238AARS/XAA-00, RFG237AAWP/XAA-05, RFG237AAWP/XAA-04 Owner’s Manual

...

Refrige or

user manual

the possibilities

Thank you for purchasing this Samsung product.

KEY FEATURES OF YOUR NEW REFRIGERATOR

Your Samsung French Door Refrigerator comes equipped with various innovative storage and energy-

efficient features.

• Twin Cooling System

The fridge and freezer have separate evaporators. Due to this independent cooling system, the fridge and freezer cool more efficiently. Additionally, this separate air flow system prevents food odor

of one compartment from seeping into other compartments.

• Cool Select Pantry PWs

The Cool Select pantry PLUsis a full-width drawer with adjustable temperature control.

• Bigger Storage Capacity

The refrigerator provides you bigger storage capacity within the same built-in look, without sacrificing style.

• Secure Auto Close

The Secure Auto Close feature will automatically close a door that is slightly open.

• Compact Ice Maker

The Ice maker can dispense cubed or crushed ice.

• Digital Display and Temperature Control

• Water Filtration System

• Door Alarm

A helpful beeper alerts you if a door is ajar.

• Tilting Pocket

The tilting pocket can be used to store small packages of frozen food.

,, Super Extended Drawer

The upper drawer in the freezer comes out all the way to the tilting pocket.

• Easy Handle

Freezer door can be opened with less effort.

• Dual Ice Maker (RFG238)

The fridge and freezer each have an ice maker; providing even more cubed and crushed ice.

2 Fea u es

For easy future reference, write the model and serial number down. You will find your model number and serial number on the left side of the refrigerator.

Model #

Serial #

SAFETY INFORMATION

Before using your new Samsung French Door Refrigerator, please read this manual thoroughly to ensure that

you know how to safely and efficiently operate the features and functions that your new appliance offers. This appliance is not intended for use by persons (including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Because the following Instructions cover various models, the characteristics of your refrigerator may'

differ slightly from the refrigerator described in this manual. If you have any questions contact us at

1-800-SAMSUNG or find help and information online at www.samsung.com.

Important

A,,

WARNING

/5,

CAUTION

[_ Do NOT touch.

These warning signs are here to prevent injury to you and others. Please follow them carefully. After reading this section, keep it in a safe place for future reference.

safety symbols and precautions:

Hazards or unsafe practices that may result in severe personal injury or death.

Hazards or unsafe practices that may result in minor personal injury or property damage.

Do NOT attempt. Do NOT disassemble.

Follow directions carefully. Unplug the power plug from the wall socket.

Make sure the refrigerator is grounded to prevent electric shock. Call the contact center for help. Note.

SEVERE WARNING SIGNS FOR INSTALLATION

• Do not install the refrigerator in a damp place or place where it may come in contact with water.

- Deteriorated insulation of electrical parts may cause an electric shock or fire.

• Do not place this refrigerator in direct sunlight or expose to the heat from stoves, room heaters or other appliance.

• Do not plug several appliances into the same multiple power board. The refrigerator should always be plugged into its own individual electrical board which has a voltage rating that matched the rating plate.

- This provides the best performance and also prevents overloading house wiring circuits, which could cause a fire hazard from overheated wires.

• If the wall socket is loose, do not insert the power plug.

- There is a risk of electric shock of fire.

• Do not use a cord that shows cracks or abrasion damage along its length or at either end.

• Do not bend the power cord excessively or place heavy articles on it.

• Never unplug your refrigerator by pulling on the power cord. Always grip plug firmly and pull straight out from the outlet.

Safety I-fformaton 3

- Damage to the cord may cause a short-circuit, fire and/or electric shock.

,, Do not use aerosols near the Refrigerator.

- Aerosols used near the Refrigerator may cause an explosion or fire.

This refrigerator must be properly installed and located in accordance with the manual before it is used. Connect the power plug in proper position with the cord hanging down.

- If you connect the power plug upside down, the wire can get cut off and cause a fire or electric shock.

,, When moving the refrigerator, be careful not to roll over or damage the power cord.

- This constitutes a fire hazard.

,, Make sure that the power plug is not squashed or damaged by the back of the refrigerator. ,, Keep the packing materials out of reach of children.

- There is a risk of death from suffocation if children put them on their head.

,, The appliance must be positioned so that the plug is accessible after installation. ,, You need to remove all the protective plastic film before you initially plug in to use the product.

,, The Refrigerator must be safely grounded

- Always make sure that you have grounded the Refrigerator before attempting to investigate or repair any part of the appliance. Power leakages can cause severe electric shock.

,, Never use gas pipes, telephone lines or other potential lightning attractors as an electrical ground.

- Improper use of the grounding plug can result in a risk of electric shock.

If it is necessary to use an extension cord, use only a 3-wire extension cord that has a

3-blade grounding plug and a 3-slot receptacle that will accept the plug on the appliance. The marked rating of the extension cord should be AC115-120V, 10A, or more. If a

grounding adapter is used, make sure the receptacle box is fully grounded.

,, If the power cord is damaged, have it replaced immediately by the manufacturer or its service agent.

CAUTION SIGNS FOR INSTALLATION

CAUTION

,, Allow sufficient space to install the refrigerator on a flat surface.

- If your refrigerator is not level, the internal cooling system may not work correctly.

• Keep ventilation opening in the appliance enclosure or mounting structure clear of obstruction.

• Allow the appliance to stand for 2 hours after installation.

w z .,.oSEVEREWARNING SIGNS FOR USING

• Do not insert the power plug with wet hands.

• Do not store articles on the top of the appliance.

- When you open or close the door, the articles may fall and cause personal injury and/or

material damage.

• Do not put a container filled with water on the refrigerator.

- If spilled, there is a risk of fire or electric shock.

,, Children should be supervised to ensure that they do not play with the appliance.

- Keep fingers out of "pinch point" areas; clearances between the doors and cabinet are

necessarily small. Be careful when you open the doors when children are in the area.

,, Do not let children hang on the door. A serious injury may occur. ,, Do not let children enter inside of the refrigerator. There is a risk of children entrapment.

w oSEVERE WARNING SIGNS FOR USING

,, Do not insert your hands into the bottom area under the appliance.

- Any sharp edges may cause personal injury.

• Do not let children step on drawer's cover.

- The drawer may break and cause them to slip.

• Do not overfill the refrigerator with food.

- When you open the door, an item may fall out and cause personal injury or material damage.

4 Safety Infom%_, on

• Do not touch the inside walls of the freezer or products stored in the freezer with wet hands.

- This may cause frostbite.

,, Never put fingers or other objects into the water dispenser hole, ice chute and ice maker bucket.

- It may cause personal injury or material damage.

,, Do not spray inflammable gas near the refrigerator.

- There is a risk of explosion or fire.

• Do not store volatile or flammable substances in the refrigerator.

- The storage of benzene, thinner, alcohol, ether, LP gas and other such products may cause

explosions.

,, Do not store pharmaceuticals products, scientific materials or temperature sensitive

products in the refrigerator.

- Products that require strict temperature controls must not be stored in the refrigerator.

Do not place or use an electrical appliance inside the refrigerator, unless it is of a type recommended by the manufacturer.

Do not use mechanical devices or any other means to accelerate the defrosting process, other than those recommended by the manufacturer.

Do not damage the refrigerant circuit. Do not disassemble or repair the refrigerator by yourself.

- You run risk of causing a fire, malfunction and/or personal injury.

- When the interior or exterior LED lamp has gone out, please contact your service agents.

Children should be supervised to ensure that they do not play with the appliance.

Bottles should be stored tightly together so that they do not fall out.

This product is intended only for the storage of food in a domestic environment.

If a gas leak is detected, avoid any naked flames or potential sources of ignition and air

the room in which the appliance is standing for several minutes.

,, Use only the LED Lamps provided by manufacturer or service agents ,, Pull the power plug out of the socket before changing the interior lamps of the refrigerator.

- Otherwise, there is a risk of electric shock.

,, If there are burning smells or smoke, pull out power plug immediately and contact your

Samsung Electronics service center. ,, if you experience difficulty when changing the light, contact service agents. ,, If the products equipped with LED Lamp, do not disassemble Lamp Cover and LED Lamp by yourself.

- Please contact your service agents.

,, If any dust or water is in Refrigerator, pull out power plug and contact your Samsung

Electronics service center.

- Otherwise there is a risk of fire.

/k CAUTION SIGNS FOR USING

OAUTION

Do not re-freeze frozen foods that have thawed completely. Do not place carbonated or fizzy drinks in the freezer compartment. Do not put bottles or glass containers in the freezer.

- When the contents freeze, the glass may break and cause personal injury.

,, Service warranty and Modification.

- Any changes or modifications performed by a 3rd party on this finished appliance is not covered under Samsung warranty service, nor can Samsung be responsible for safety issues that result from 3rd party modifications.

,, Do not block air holes.

- If the air holes are blocked, especially with a plastic bag, the refrigerator can be over cooled. If this cooling period lasts too long, the water filter may break and cause water leakage.

,, If the refrigerator is disconnected from the power supply, you should wait for at least five

minutes before plugging it back.

,, If you have a long vacation planned or the refrigerator is not to be used for a long period

of time, you must empty the refrigerator and pull out the power plug.

Safety I-fformaton 5

- Deterioration in the insulation may cause fire. Wipe excess moisture from the inside and leave the doors open.

- Otherwise, odor and mold may develop.

• To get Best performance of product,

- Do not place foods too closely in front of the vents at the rear of the appliance as it can obstruct free air circulation in the refrigerator compartment.

- Wrap the food up properly or place it in airtight containers before putting it into the refrigerator.

• Fill water tank, ice tray, water cubes only with potable water.

• Do not apply strong shock or excessive force onto the surface of glass.

- Broken glass may result in a personal injury and/or property damage.

When the refrigerator gets wet by water, pull out the power plug and contact your Samsung Electronics service center.

/K CAUTION SIGNS FOR CLEANING

CAUTION

• Do not directly spray water inside or outside the refrigerator.

- There is a risk of fire or electric shock.

• Remove any foreign matter or dust from the power plug pins. Do not use a wet or damp

cloth when cleaning the plug, remove any foreign material or dust from the power plug pins.

- Otherwise there is a risk of fire or electric shock.

• Unplug the refrigerator before cleaning and making repairs.

WARNING

This product contains chemicals known to the State of California to cause cancer and reproductive toxicity.

w . .,.GSEVEREWARNING SIGNS FOR DISPOSAL

,, Risk of child entrapment. Before you throw away your old refrigerator or freezer.

- Take off the doors.

- Leave the shelves in place so that children may not easily climb inside.

,, Please dispose of the packaging material for this product in an environmentally friendly manner.

• Leave the shelves in place so that children may not easily climb inside. Ensure that none of the pipes on the back of the appliance are damaged prior to disposal.

,, When disposing of this refrigerator, remove the door/door seals and door latch so that

small children or animals cannot become trapped inside.

Children should be supervised to ensure that they do not play with the appliance.

,, Cyclopentane is used as in the insulation. The gases in insulation material require

a special disposal procedure. Please contact your local authorities in regard to the environmentally safe disposal of this product. Ensure that none of the pipes on the back of the refrigerator are damaged prior to disposal.

6 Safety I'fformaton

SETTING UP YOUR

FRENCH DOOR REFRIGERATOR

08 Getting ready to install the refrigerator 09 Setting up the refrigerator

09 Removing the refrigerator doors

11 Disassemble the freezer drawer 12 Reattaching the refrigerator doors

14 Assemble the freezer drawer 15 Adjusting the doors

16 Making minor adjustments between doors 17 Adjusting the freezer drawer level

18 Checking the water dispenser line 19 Installing the water line

OPERATING YOUR

FRENCH DOOR REFRIGERATOR

21 Using the control panel(RFG237 Model) 22 Using the digital display(RFG237 Model)

23 Controlling the temperature(RFG237 Model) 24 Using the cold water dispenser(RFG237 Model)

26 Using the control panel(RFG238 Model) 27 Using the digital display(RFG238 Model) 28 Controlling the temperature(RFG238 Model)

29 Using the cold water dispenser(RFG238 Model)

31 Parts and features 32 Storing food inthe refrigerator

32 Storing food inthe freezer drawer 33 Using the Cool Select Pantry PLus 34 Removing the refrigerator accessories

35 Using the doors 35 Using the tilting pocket

36 Removing the freezer accessories 37 Food storage tips 39 Cleaning the refrigerator

40 Changing the interior lights 41 Changing the water filter

TROUBLESHOOTING 42 Troubleshooting

WARRANTY

43 Water filter chart 44 Water filter certification

45 Warranty on SAMSUNG refrigerator

GETTING READY TO INSTALL THE REFRIGERATOR

Congratulations on your purchase of the Samsung French Door Refrigerator. We hope you enjoy the state-of-art

features and efficiencies that this new appliance offers.

Selecting the best location for the refrigerator ,, A location with easy access to the water supply.

,, A location without direct exposure to sunlight. ,, A location with a leveled floor.

,, A location with enough space for the refrigerator doors to open easily. ,, Allow sufficient space to the right, left, back and top for air circulation.

If the Refrigerator does not have enough space, the internal cooling system

may not work properly.

,, Please ensure that appliance can be moved freely in the event of

maintenance & service.

If your refrigerator has an ice maker, allow extra space at the back for the water line connections. When you install the refrigerator next to a fixed wall, minimum clearance is 3 sA,,(95mm) between the refrigerator and wall to allow the door to swing open.

First thing! Make sure that you can easily move your refrigerator to its final location by measuring doorways (both width and height), thresholds, ceilings, stairways, etc.

The following chart details the exact height and depth of Samsung

French Door Refrigerator.

2 inch

Model Depth Width Height Overall Depth

"A.... B.... C" Height "D.... E"

RFG238**/ 28" 35 6/8" 68 1/2" 69 6/8" 30 1/2" RFG237** (712 mm) (908 mm) (1740 mm) (1774mm) (774 mm)

Allow clearance to the right, left, back and top when installing.

This will help reduce power consumption and keep your energy bills lower.

Do not install the refrigerator where the temperature will go below 50°F (10°C).

Do not locate the refrigerator where it may become wet.

CAUTION

When moving your refrigerator To prevent floor damage be sure the front adjusting

legs are in the up position(above the floor). Refer to 'Adjusting the doors' in the manual

(on page 15).

Flat-blade screw driver(-) Control Lever

FLOORING For proper installation, this refrigerator must be placed on a leveled

surface of hard material that is the same height as the rest of the

flooring. This surface should be strong enough to support a fully

loaded refrigerator. To protect the finish of the flooring, cut a large section of the cardboard carton and place under the refrigerator where you are working. When moving a refrigerator, it is needed to

pull and push in the back-and-forth direction.

8 Setti]g Up

SETTING UP THE REFRIGERATOR

Now that you have your new refrigerator installed in place, you are ready to set up and enjoy the features and

functions of the appliance. By completing the following steps, your Refrigerator should be fully operational.

1. Place the refrigerator in an appropriate location with reasonable clearance between the walls and the refrigerator.

Refer to installation instructions in this manual. (page 9, Selecting the best location for the refrigerator)

2. Once the refrigerator is plugged in, make sure the interior light comes on when you open the doors.

3. Set the Temperature control to the coldest temperature and wait for an hour. The freezer will get slightly chilled and the motor will run smoothly.

4. After powering the refrigerator, it will take a few hours to reach the appropriate temperature. You can

store food and drinks in the refrigerator after the temperature is sufficiently low.

_ Check the accessories listed below.

Water filter Hex wrench Fastener

Required Tools(Not provided)

Philips screwdriver(+) Flat-blade screwdriver(-) Socket wrench (10mm) Pliers Allenwrench(3/16")

(Smm)

REMOVING THE REFRIGERATOR DOORS

Some installations require door removal to transport the refrigerator to its final location. Do not remove the door/drawer if it is not needed. Before removing the door/drawer, make sure you read following items.

A Disconnect power to the refrigerator before removing the door or drawer.

WARNING

• Be careful not to drop, damage or scratch the door/drawer while removing them.

• Be careful not to get injured while removing the door/drawer.

• Reattach the door/drawer properly to avoid:

- Moisture from air leakage.

- Uneven door alignment.

- Wasting energy due to improper door seal.

Disassemble the refrigerator doors

Z_ Be careful not to drop and scratch the doors while

....... removing the doors.

Disassemble the refrigerator doors

1. With the door opened, remove the hinge top table (_]) with a flat-blade screwdriver, and close the door.

Remove the 3 screws holding down the top table (_) and remove it.

Sett]g Up 9

2. Disconnect two connectors (1_) at each side of the top cap, the one connector (1_) on right side door and the other

connector (_D) on left side door. Remove the tube (l_l) with pressing the dark gray

color part (1_1) of the water line coupler.

Z_ If a red clip is on the coupler, it must

....... be removed before removing the tube.

Remove the 3 hex head bolts (_) attached to the upper left

and right door hinges with a socket wrench (10mm).

Remove the ground screw (1_) attached to the upper left

and right door hinges with a philips screwdriver(+).

Remove the upper left and right door hinges (_}).

Socket wrench

4. Lift the door straight up to remove.

Remove the screw (1_) attached to the lower left and right door hinges with a philips screwdriver(+).

Remove the 2 hex head bolts (1_) attached to the lower left

and right door hinges with an allen wrench(3/16").

Remove the lower left and right door hinges (1_).

10 Setti]g Up

DISASSEMBLE THE FREEZER DRAWER

1. Take out the upper drawer by lifting it up.

2. Remove the tilting pocket (_) by pulling both support guards ((_) upward at the same time.

3. Take out the lower basket (1_) by lifting the basket up from

the rail system.

4. Remove 4 hex head bolts from both sides with a socket wrench (10ram).

5. Lift up the freezer door from the rails.

iiJ i

A Putting too much food into the freezer drawers can prevent the

....... freezer from closing completely and can cause frost build-up.

Sett]g Up 11

REATTACHING THE REFRIGERATOR DOORS

Assemble the refrigerator doors

Reattach the lower left and right door hinges (1_}). With a Philips head screwdriver, insert and tighten the screw (_) into the lower left and right door hinges. With a allen wrench (3/16"), insert and tighten the 2

hex head bolts ([_) into the lower left and right door

hinges.

Place the hole in the bottom of the door over the door hinge (@).

Be careful not to miss the hinge cap because it can

be easily taken off.

Insert the upper hinges (1_) into the holes at the top of the doors.

Insert and tighten the 3 hex head bolts (_) into the upper left and right door hinges with a socket wrench (10mm).

Insert and tighten the ground screw (_) into the upper left and right door hinges with a philips screwdriver(+).

Socket wrench

12 Setti]g Up

REATTACHING THE REFRIGERATOR DOORS

4. Connect the water line (_) and then insert a clip on the coupler with pulling tube. Connect the one

connector (_) on left side door, the other connector (1_) on right side door and two connectors (_}) at each side of the top cap.

The clip is enveloped inside of the top cap.

Door Tube

• The Water Line must be fully inserted to the

CAUTION

center of transparent coupler (Type A) or the

line (Type B) to prevent water leakage from the

dispenser.

• Insert the clip in the install pack and check that it holds the line firmly.

Position the top table (_}) in place. Insert and tighten

the 3 screws into the top table with a philips screw

driver(+). After door opened, reinsert the cap top table (13}) and close the doors.

When reattaching the top table, make sure that the wires are not pressed or damaged by the hinge cover.

_ After assembling, close the door and check to see

whether the door has gaps between gaskets or is tilted. If you see one of them, please refer to "Adjusting the doors" page on 15.

Type A

f •

Center of Transparent coupler

Type B

Dispenser

t t

The Guide Lines

clip A (1/4") (6.35mm)

Setti]g Up 13

ASSEMBLE THE FREEZER DRAWER

1. Pull out the rails fully on each side of the cabinet.

2. Attach the freezer door front onto the open slots on the sides.

3. Tighten 4 hex head bolts completely with a socket wrench(10mm).

4. Insert the lower basket ({_) into the rail system.

5. Hook the ends of the tilting pocket ((_) onto the brackets and push down until they are locked into place.

6. Insert the upper drawer.

Remove 2 pieces of tape ({_}) attached to the side of the drawer bin. Reattach the tape in the same position when moving the refrigerator to

prevent scratching the drawer bin.

14 sett],9 up //

ADJUSTING THE DOORS

After putting the doors back on the refrigerator, make sure the refrigerator is level so that you can make final adjustments.

If the Refrigerator is not level, it will not be possible to get the doors perfectly even, which may cause moisture condensation and increased energy bills.

For example, when the left side is lower than the right side, insert a flat-blade screwdriver(-) into a notch on the left control lever, and turn it counterclockwise to level the door.

Turning it clockwise to lower the refrigerator and counterclockwise to raise it.

For the left side is higher, do it with right lever.

Z_ Both control levers must be surely touching the floor to avoid possible personal injury or property damage because

....... of tipping.

We do not recommend making small adjustments with the control lever. Instead, refer to the next page for the best

way to make minor adjustments to the doors.

@.. ,,,9

flat-blade screwdriver(-)

Control Lever

flat-blade screwdriver(-)

settqg up 15

MAKING MINOR ADJUSTMENTS BETWEEN DOORS

Remember a leveled refrigerator is necessary for getting the doors perfectly flush. If you need help, review the previous section on leveling the refrigerator.

When the left

door is lower

than the right

door.

l |

iiiilililililililililililililililililililililili

When the left door is higher

than the right door.

Ad,uStmL

1. Pull out the freezer drawer ((_), then you can see the lower hinge (_).

2. Insert the supplied allen wrench (7/16") ((]_) into the shaft ((_) of the lower hinge.

3. Please adjust the height by turning the hex wrench ((_) clockwise ( ) or counter-clockwise ( ).

[_ When you turn the hex wrench counter-clockwise( ), the door will move up.

After adjusting the doors, please insert the supplied fastener (_}) using a pliers (_)) in the gap between the hinge-grommet (_) and the lower hinge (_). The number of fastener you'll need to insert depends

on the gap.

_2 fastener are enclosed with the refrigerator. The thickness of each fastener-ring is 0.04".

16 Setti]g Up

ADJUSTING THE FREEZER DRAWER LEVEL

Adjustment part

1. Locate the height-adjuster (j_) in the freezer drawer. Unscrew the 8 Phillips screws (_) slightly to loosen the door.

Freezer Drawer

2. Loosen the controller screw ((_) with a Phillips screwdriver(+).

3. Find the best level to align the door slope.

Example) The slope is about 0.08"(2ram) as shown below.

- Rotate the height adjuster to -2.0 to reduce the door slope.

Slope I_

plane-----_

After adjustment, tighten the controller screw ((_) and philips screws.

Sett]g Up 17

CHECKING THE WATER DISPENSER LINE

A water dispenser is one of the helpful features on your new refrigerator. To help promote better

health, the water filter removes unwanted particles from your water. However, it does not sterilize or destroy microorganisms. You may need to purchase a water purifying system to do that.

In order for the ice maker to operate properly, a water pressure of 20-125 psi is required. Under normal conditions, a 170 cc (5.75 oz.) cup can be filled in 10 seconds.

If the refrigerator is installed in an area with low water pressure (below 20psi), you can install a booster pump to compensate for the low pressure.

Make sure the water storage tank inside the refrigerator is properly filled. To do this, press the water dispenser lever until the water runs from the water outlet.

_} Water line installation kits are available at extra cost from your dealer. We recommend using a water line

installation kit that contains copper tubing and 1/4,,compression nut.

Connecting to the water supply line

1. First, shut off the main water supply.

2. Locate the nearest cold water drinking line and install the pipe clamp and shut off valve.

3. Connect the water line installation kit to shut off valve.

Cold water line

Pipe clamp

Shut off valve

)

Cold water line

Pipe clamp

Shut off valve

Water line installation kit

[_ After connecting the water supply with water filter, turn on water supply and Flush 3 gallons through filter

before use (flush approximately 6 minutes). If water drop or leakage is found on the connection area, turn off the main water supply.

Check it and, if necessary, tighten it more.

18 Setting Up

INSTALLING THE WATER LINE

Connecting the water supply line to the refrigerator.

There are several items that you need to purchase to complete this connection. You may find these items sold as a kit at your local hardware store.

Use Copper Tubing

• 1_,,copper tubing " 1A"compression nut (1pc)

• Ferrule (2pc)

Use Plastic Tubing

• _A" plastic tubing Molded end(Bulb)

" _4" compression nut (1pc)

Compression

Nut (1/4")

(Assembled)

Ferrule ' ,

(Not supplied)

Copper tubing or Plastic tubing(@

Refrigerator

Plastic Tubing

(Assembled)

Compression Fitting (Assembled)

t _

Molded end(Bulb)

Compression nut(@ (1/4") (Not supplied)

(Not supplied) (Not supplied)

Household water supply line

1. Connect the household water line to the assembled compression fitting.

- If you are using copper tubing, slip the compression nut (@(not supplied) and ferrule (not supplied) on copper tubing (not supplied) as shown.

- If you are using plastic tubing (@,insert the molded end(Bulb) of the plastic tubing (@into the compression fitting.

Z_ Do not use without the molded end(Bulb) of the plastic tubing (@.

CAUTION

2. Tighten the compression nut (@onto the compression fitting. Do not over-tighten the compression nut (@.

3. Turn water on and check for any leakage.

_Only connect the water line to a drinkable water source.

If you have to repair or disassemble the water line, cut off 1/4" of the plastic tubing to make sure you get a snug, leak-free connection.

Installing the water filter.

After remove the right side upper shelf, you can install the water filter more easily.

Remove the water filter cover (1_)

Remove the fixed cap (_) by turning it counter clockwise. Keep the cap in a safe place for later use if you don't use the filter.

Remove the water filter ([_)) from the box and put a replacement indicator sticker (Indicator sticker is included in

the box) on the filter as shown. Place the sticker on the filter that dates six months in the future. For example, if you install the water filter in March, put the "SEP" sticker on the filter to remind you to replace it in September. This way, you can remember the time to replace the water filter. Normally, a filter

life is about 6 months.

Settiqg Up 19

Remove the filter cap (_) and insert the filter into the filter housing.

Slowly turn the water filter 90° clockwise to align with the printing mark on the cover, locking the filter in position. Make sure to align the water filter label mark

([_}) with center of cover filter printing as illustrated. Remember, do not over-tighten.

Separation

of filter cap(red)

Removing any residual matter inside the water supply line

after installing the water filter.

1. Turn on the main water supply & turn on the valve to the water supply line.

2. Run water through the dispenser until the water runs clear (approx. 6-7minutes). This will clean the water supply system and remove air from

the lines.

3. Additional clearing time may be required in some households.

4. Open the Refrigerator door and make sure there are no water leaks coming

from the water filter.

Cover filter.

Turn until the label

is aligned.

Be sure to flush the dispenser thoroughly or water may leak from it.

This is due to the fact that there is still air in the line.

Reverse Osmosis Water Supply

IMPORTANT • The pressure of the water supply coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 35 and 120 psi (241 and 827 kPa).

If a reverse osmosis water filtration system is connected to your cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 psi (276 to 414 kPa.)

If the water pressure to the reverse osmosis system is less than 40 to 60 psi (276 to 414 kPa):

• Check to see whether the sediment filter in the reverse osmosis system is blocked. Replace the filter if necessary.

• Allow the storage tank on the reverse osmosis system to refill after heaw usage.

• If your refrigerator has a water filter, it may further reduce the water pressure when used in conjunction with a reverse osmosis system. Remove the water filter.

If you have questions about your water pressure, call a licensed, qualified plumber.

20 Setti]9 Up

USING THE CONTROL PANEL

French

'"Energy

Saver

Freezer

(3se_)

Alarm

Press the Energy Saver button for better energy efficiency. Ifwater drops appear on the doors, turn the Energy Saver function off.

Press the Freezer / Power Freeze (3 sec} button to set the freezer to your desired temperature.

You can set the temperature between -8°F and 8°F. Press and hold the Freezer / Power Freeze (3 sec}

button for 3 seconds to speed up the time needed to freeze products in the freezer. It can be helpful if you need to quickly freeze easily spoiled items or if the temperature in the freezer has warmed dramatically (For example, if the door was left open).

Press the Alarm / Reset Filter (3 sec} button to turn off the door open alarm. (At first, alarm mode is On )

After removing the old water filter and installing a new one, reset the indicator by pressing and holding this

button for 3 seconds. (Theindicator is litat first and will light again in about 6 months to let you know it is time to change your water filter.)

Press the Lighting button to turn on the Dispenser LED lamp.

lll!illlllll!illlllll!illlllll!illlllll!illlllll!illlllll!illlllll!illlllll!illlllll!illlllll!illlllll!illlllll!illlllll!illlllll!illlllll!illlllll!illlllll!illllllliii!i_

Press the Fridge / Power Cool (3 sec} button to set the fridge to your desired temperature.

You can set the temperature between 34°F and 46°R

Press and hold the Fridge / Power Cool (3 sec} button for 3 seconds to speed up the time needed to cool products in the refrigerator. It can be helpful ifyou need to quickly cool easily spoiled items or if the

temperature in the fridge has warmed dramatically (For example, if the door was left open).

Press the Ice off / Child Lock (3 sec} button to turn the fridge or freezer ice making function off. Ifyou press and hold this button for 3 seconds, the display and dispenser will be locked.

Press the Ice button to select your desired ice type. Cubed and crushed ice modes will be alternatively changed whenever you press the button. This mode can not be used with the Water mode simultaneously.

Press the Water button to dispense water. This mode can not be used with the Ice Type mode simultaneously.

Water mode will be off if you press the Ice Type button.

Some functions are activated after a few-second delay when the buttons are pressed, while others operate immediately. This is normal operation.

ur D

USING THE DIGITAL DISPLAY

If you do not press any button, freezer & fridge temperature indicator wi[[ turn off in a few seconds. If any button is pressed, the display will light up again.

Saver

Freezer Fridge

Aiarm Ice Off

Lighting

Power Freeze @

This icon will light up when you press the Freezer / Power Freeze (3 sec) button for 3 seconds. Power Freeze is great when you need a lot of ice. When you have enough ice, just press the same button again for

3 seconds to cancel the Power Freeze mode. After 2 and a half hours, Power Freeze mode will turn off automatically to decrease energy consumption.

Cubed ice _, Crushed ice_, Water

Enjoy cubed or crushed ice by selecting your preference from the digital control panel. If you don't need ice, turn the function off to save on water and energy consumption. Each Ice type icon will light up by your selection.

Power Cool _)

This icon will light up when you press the Fridge / Power Cool (3 sec} button for 3 seconds. For a quick fridge cool down, use Power Cool mode. If you want to cancel the Power Cool mode, just press the same button again for 3 seconds. After 2 and a half hours, Power cool mode will turn off automatically to decrease energy consumption.

Filter L:"o"J

When the filter indicator light is on, it is time to change the filter. Typically this happens about every 6 months. The filter indicator will be Blue when you initially insert the water filter. The filter indicator will be Light Pink when you have used your water filter for 270 gallons. The filter indicator will be Red when you have used your water filter for 300 gallons.

After removing the old water filter and installing a new one(see page 41 of the owner's manual for instructions) when the filter indicator is red, reset the indicator by pressing and holding the "Alarm / Reset Filter (3 sec)" button for 3 seconds. (The filter indicator will be blue or yellow green when the indicator is reset.)

Cooling off Mode ("OF & OF" code on the display)

Cooling Off Mode stops cooling in the freezer and refrigerator compartments, but does not shut off electrical

power to the refrigerator. To use this feature, press Energy Saver Button and Freezer / Power Freeze (3 sec) Button simultaneously for 3 seconds until an alarm sound is heard. To cancel this mode, press the same buttons again for 3 seconds and the refrigerator will return to cooling mode.

This function is for store display refrigerators. It is not for customer use.

Energy saver _£

This icon will light up when you press the Energy Saver button. The Energy Saver function is automatically set to "ON" when power is supplied to the refrigerator. If condensation occurs on the doors, turn the

Energy Saver mode off.

Lighting =<5.

This icon will light up when you press the Lighting button. In this case, the dispenser light(under the display) will be on constantly. If you would like the dispenser light to come on only when using the dispenser, turn the Lighting mode off.

8m_,

Alarm @)

This icon will light up when you press the Alarm button. The door alarm will sound if any door is open for

more than 3 minutes. The beeping stops when you close the door. Initially the Alarm is set to on.

ice off

This icon will light up when you press the "Ice Off" button. In this case, the ice will not be produced.

Lock

This icon will light up when you press the Lock button. In this case, you won't be able to use the control

panel. Ifyou press and hold the Ice Off/Hold button for 3 sec to unlock Child Lock, you will be able to use

the control panel again.

CONTROLLING THE TEMPERATURE

Basic temperature of Freezer and Refrigerator Compartments

The basic temperature and/or recommended temperatures of the freezer and refrigerator Compartments are -2°F and 38°F respectively. If the temperature of freezer and fridge Compartments are too high or low, adjust the temperature manually.

Controlling the Freezer temperature

The freezer temperature can be set between 8°F and -8°F to suit your particular needs. Press the freezer button repeatedly until the desired temperature is shown in the temperature display. The temperature will move 2°F degrees each push (-2°F _ -4°F

-6°F _ -8°F _ 8°F _ 6°F _ 4°F _ 2°F _ 0°F _ -2°F). Keep in mind that foods like some ice cream may melt at 4°R The temperature display will move sequentially from -8°F to 8°R

Using the Power Freeze

If you need a lot of ice or if you want to cool down the freezer faster, you can use the Power Freeze function. Press and hold the Freezer / Power Freeze (3 sec) button for 3 seconds. Then, the power freeze indicator will light and activate the power freeze mode independent of the freezer set temperature. If you select Power freeze, the inside temperature of the freezer will decrease for about two and a half hours. When you have enough ice, just press and hold the button for 3 seconds again to cancel the Power Freeze mode. Then, the indicator will go out and the freezer will return to the set temperature again.

C)po ncj

Door F ofrcjo o

CONTROLLING THE TEMPERATURE

Controlling the fridge temperature

The fridge temperature can be set between 46°F and 34°F to suit your particular needs. Press the fridge

button repeatedly until the desired temperature is shown in the temperature display. The temperature will move 2°F degrees each press(38°F _ 36°F _ 34°F _ 46°F _ 44°F _ 42°F _ 40°F _ 38°F). The temperature control process for the fridge works just like the freezer process. Press the fridge button to set your desired temperature. After a few seconds, the fridge will begin adjusting towards the newly set temperature. This will be reflected in the digital display.

Using the Power Cool

For a quick Fridge cool down, use the Power Cool function. Press and hold the Fddge / Power Cool (3 sec) button for 3 seconds. Then, the power cool indicator will light and activate the power cool mode independent of fridge set temperature. If you select

Power Cool, the inside temperature of the fridge will decrease for about two and a half hours or until 25°F is reached. Press and hold

the button for 3 seconds again to cancel the Power Cool mode. Then, the indicator will go out and the Refrigerator will return to the set temperature again.

Freezer

Ice Water

The temperature of the Freezer,fridge or Pantry Room may rise

when you open the doors too frequently, or if a large amount of warm or hot food is placed inside.

This may cause the digital display to blink. Once the Freezer and

fridge temperature return to their normal set temperatures, the blinking will stop. Ifthe blinking continues, you may need to "reset" the Refrigerator.

Try unplugging the appliance, wait for around 10 minutes and then ..................................................................................................................._:,

plug the power cord back in.

Ifthere is an communication error between the Display and Main Controller, the Pantry Display light may blink. Once the normal set temperatures are reached, the blinking will stop. If the blinking continues for a long period of time, please contact a Samsung Electronics Service Center.

USING THE COLD WATER DISPENSER

Press the ice / Water button to select the type of you want

Cubed Crushed Water

No ICE

Select this if you want to turn ice

maker off.

Using the ice Dispenser

Place a glass underneath the ice dispenser and push gently against the dispenser lever with your glass. Make sure the glass is in line with the dispenser to prevent the ice from bouncing out.

Before or during using, wash ice bin/bucket with a mild detergent, rinsewell, and dry

CAUTION

thoroughly it. Do not use harsh or abrasive cleaners or solvents. Please wait 2 seconds before removing the glass under the dispenser to prevent spills.

If the Refrigerator door opens, the Dispenser does not work.

When Cubed Ice is selected after using the Crushed Ice mode, a small

amount of residual crushed ice might be produced.

If ice doesn't come out, pull out the ice bucket and press the test button located on the right side of ice maker. Do not press the test button continuously when the tray is filled with ice or water. Water may overflow or ice jamming may occur.

Normal Use To fill the ice bucket to maximum capacity after installation, make sure to

do the following steps.

1. Allow your refrigerator to operate and cool down for 24 hours(or 1 full day).

2. Waiting 24 hours will allow your ice maker to cool properly.

3. Dispense 4 to 6 ice cubes into the glass.

4. After 8 and 16 hours, dispense a full glass of ice.

When you dump the ice from the ice bucket, you should press the dispenser lever once with the 'ICE CUBED' or 'CRUSHED' function ON to get new ice faster after

replacing the ice bucket in the refrigerator, j

If you use all the ice at once, steps 3 and 4 above must be repeated (before dispensing the first 4 to _ ice

cubes, you need to wait for 8 hours). This will replenish the ice cubes and ensure maximum ice production.

PUSH

Using the ice off Function

When selecting the Ice Off mode, remove all ice cubes from the bucket. If you are not using the ice dispenser, the ice cubes may clump together. Pull the lock lever forward to throw away ice cubes or remove clumped ice from the bucket. Push the bucket back until you hear a click.

Use only the ice maker provided with the refrigerator.

it,,

CAUTION

The water supply to this refrigerator must only be installed/connected by a suitably qualified person and connect to a potable water supply only.

Inorder to operate the ice maker properly, water pressure of 20 - 125 psi is required. If you have a long vacation or business trip and won't use water or ice dispensers, close the water valve.

-. Otherwise, water leakage may occur.

Wipe excess moisture from inside and leave the doors open.

-. Otherwise, odor and mold may develop. Do not put your fingers, hands or any other unsuitable objects in the chute or ice-maker bucket.

- It may result in personal injury or material damage. Never put your finger or any other objects in the dispenser opening.

- It may cause injury. Do not try to disassemble the ice maker.

Do not wash or spray the ice bucket with water.

Water clouding phenomenon

All water provided to refrigerators flows through the core filter which is an alkaline water filter. Inthis process, the pressure in the water that has flowed out of the filter gets increased, and oxygen and nitrogen become

saturated. When this water flows out in the air, the pressure plummets and the oxygen and nitrogen get supersaturated sothat they turn into gas bubbles. The water could look misty due to these oxygen bubbles.The

water may look temporarily cloudy due to these oxygen bubbles. After a few seconds, the water will look clear.

Please wait 1 second before removing the cup after dispensing water to prevent water dribble. Do not pull

out the lever dispenser after taking out ice or water. It comes back automatically. Ice is made in cubes. When you select "Crushed", the ice maker grinds the ice cubes into crushed ice.

Opo ncj

USING THE CONTROL PANEL

Door Aofrcjo o

Press the Energy Saver button for better energy efficiency. Ifwater drops appear on the doors, turn the Energy Saver function off.

Press the Freezer / Power Freeze (3 sec} button to set the freezer to your desired temperature. You can set the temperature between -8°F and 8°F. Press and hold the Freezer / Power Freeze (3 sec}

button for 3 seconds to speed up the time needed to freeze products inthe freezer. Itcan be helpful ifyou need to quickly freeze easily spoiled items or if the temperature inthe freezer has warmed dramatically (For example, if the door was left open).

Press the Alarm / Reset Filter (3 sec} button to turn off the door open alarm. (At first, alarm mode is On ) After removing the old water filter and installing a new one, reset the indicator by pressing and holding this button for 3 seconds. (The indicator is lit at first and will light again in about 6 months to let you know it is time

to change your water filter.)

Press the Lighting button to turn on the Dispenser LED lamp.

Press the Fridge / Power Cool (3 sec) button to set the fridge to your desired temperature. You can set the temperature between 34°F and 46°R Press and hold the Fridge / Power Cool (3 sec} button for 3 seconds to speed up the time needed to cool products in the refrigerator. It can be helpful if you need to quickly cool easily spoiled items or if the

temperature inthe fridge has warmed dramatically (For example, if the door was left open).

Press the Ice off / Child Lock (3 sec} button to turn the fridge or freezer ice making function off.

Ifyou press and hold this button for 3 seconds, the display and dispenser will be locked.

Press the Water button to dispense water. This mode can not be used with the IceType mode simultaneously. Water mode will be off if you press the Ice Type button.

Some functions are activated after a few-second delay when the buttons are pressed, while others operate immediately. This is normal operation.

\ /

USING THE DIGITAL DISPLAY

Freezer Tamp ( _ ) indicates the current freezer temperature. Fridge Tamp ( 1_ ) indicates the current refrigerator temperature.

If you do not press any button, freezer & fridge temperature indicator will turned off in a few seconds. If any button is pressed, the display will light up again.

L[ght[n_g_l

Alarm

Power Freeze @

This _con will light up when you press the Freezer / Power Freeze (3 sec) button for 3 seconds. Power Freeze is great when you need a lot of ice. When you have enough ice, just press the same button

again for 3 seconds to cancel the Power Freeze mode. After 2 and a half hours, Power Freeze mode will turn off automatically to decrease energy consumption.

Cubed ice _, Crushed ice _, Water

Power Cool

This icon will light up when you press the Fridge / Power Cool (3 sec) button for 3 seconds. For a quick fridge cool down, use Power Cool mode. If you want to cancel the Power Cool mode, just press the same button

again for 3 seconds. After 2 and a half hours, Power cool mode will turn off automatically to decrease energy consumption.

Filter L::o:J

When the filter indicator light is on, it is time to change the filter. Typically this happens about every 6 months. The filter indicator will be Blue when you initially insert the water filter.

The filter indicator will be Light Pink when you have used your water filter for 270 gallons. The filter indicator will be Red when you have used your water filter for 300 gallons.

After removing the old water filter and installing a new one(see page 41 of the owner's manual for instructions) when the filter indicator is red, reset the indicator by pressing and holding the "Alarm/Hold 3 sac for Filter Reset" button for 3 seconds. (The filter indicator will be blue or yellow green when the indicator is reset.)

Cooling off Mode ("OF & OF" code on the display)

Cooling Off Mode stops cooling in the freezer and refrigerator compartments, but does not shut off electrical power to the refrigerator. To use this feature, press Energy Saver Button and Freezer / Power Freeze (3 sac) Button simultaneously for 3 seconds until an alarm sound is heard. To cancel this mode, press the same

buttons again for 3 seconds and the refrigerator will return to cooling mode.

This function is for store display refrigerators. It is not for customer use.

Energy saver :D.£

Energy Saver mode off.

Lighting :8,-

Thisicon will light up when you press the Lighting button. In this case, the dispenser light(under the

display) will be on constantly. If you would like the dispenser light to come on only when using the dispenser, turn the Lighting mode off.

Alarm @)

This icon will light up when you press the Alarm button. The door alarm will sound if any door is open for

more than 3 minutes. The beeping stops when you close the door. Initially the Alarm is set to on.

Fridge ice off ,c_f,

This icon will light up when you press the Fridge Ice Off button. In this case, the fridge ice will not be produced.

Freezer ice off []

Ice Off

This icon will light up when you press the Freezer Ice Off button. In this case, the freezer ice will not be produced.

, As this refrigerator has a dual Ice Maker, there is a possibility of using more energy. We recommend if you have

enough ice, set Ice Off to save energy.

* You may occasionally hear noises from Ice dropping or water flowing to the icemaker. These noises are part of

normal operation.

Lock I_

This icon will light up when you press the Lock button. In this case, you won't be able to use the control

panel. Ifyou press and hold the Ice Off/Hold button for 3 sec to unlock Child Lock, you will be able to use

the control panel again.

CONTROLLING THE TEMPERATURE

Basic temperature of Freezer and Refrigerator Compartments

The basic temperature and/or recommended temperatures of the freezer and fridge Compartments are

-2°F and 38°F respectively. If the temperature of freezer and fridge Compartments are too high or low,

adjust the temperature manually.

Controlling the Freezer temperature

The freezer temperature can be set between 8°F and -8°F to suit your particular needs. Press the freezer button repeatedly until

the desired temperature is shown inthe temperature display. The temperature will move 2°F degrees each push (-2°F _ -4°F _ -6°F

-8°F _ 8°F _ 6°F ,- 4°F _ 2°F _ O°F_ -2°F). Keep in mind

that foods like some ice cream may melt over 4°F. The temperature display will move sequentially from -8°F to 8°F. Five seconds after

the new temperature is set, the display will show the actual current freezer temperature until the new temperature is reached.

Using the Power Freeze

If you need a lot of ice or if you want to cool down the freezer

faster, you can use the Power Freeze function. Press and hold the

Freezer / Power Freeze (3 sec) button for 3 seconds. Then, the

power freeze indicator will light and activate the power freeze mode

independent of the freezer set temperature. If you select Power

freeze, the inside temperature of the freezer will decrease for about two and a half hours. When you have enough ice, just press and hold the button for 3 seconds again to cancel the Power Freeze

mode. Then, the indicator will go out and the freezer will return to the set temperature again.

J J J J J

J J J J J J

\ /

Controlling the fddge temperature

The fridge temperature can be set between 46°F and 34°F to suit your particular needs. Press the fridge button

repeatedly until the desired temperature is shown in the temperature display. The temperature will move 2°F degrees each press(38°F _ 36°F _ 34°F _ 46°F _ 44°F _ 42°F _ 40°F _ 38°F). The tern _erature control

process for the fridge works just like the freezer process. Press the fridge button to set your desired temperature.

After a few seconds, the fridge will begin adjusting towards the newly set temperature. This will be reflected in the

digital display.

Using the Power Cool

For a quick Fridge cool down, use the Power Cool function. Press and hold the Fddge / Power Cool (3 sec) button for 3 seconds. Then, the power cool indicator will light and activate the power cool

mode independent of fridge set temperature. If you select Power

Cool, the inside temperature of the fridge will decrease for about two and a half hours or until 25°F is reached. Press and hold the

button for 3 seconds again to cancel the Power Cool mode. Then, the indicator will go out and the Refrigerator will return to the set temperature again.

The temperature of the Freezer, fridge or Pantry Room may rise

when you open the doors too frequently, or if a large amount of warm or hot food is placed inside.

This may cause the digital display to blink. Once the Freezer and

fridge temperature return to their normal set temperatures, the

blinking will stop.

If the blinkinc continues, you may need to "reset" the Refrigerator.

Try unplugging the appliance, wait for around 10 minutes and then

plug the power cord back in.

If there is an communication error between the Display and Main Con Once the normal set temperatures are reached, the blinking will stop. If the blinking continues for a long period of time, please contact a Samsung Electronics Service Center.

USING THE COLD WATER DISPENSER

Press the ice type or Water button to select the type of you want

Energy

Saver

Using the ice Dispenser

Place a glass underneath the ice dispenser and push gently against the dispenser lever with your glass. Make sure the glass is in line with the dispenser to prevent the ice from bouncing out.

Before or during using, wash ice bin/bucket with a mild detergent, rinse well,

CAUTION

and dry thoroughly it. Do not use harsh or abrasive cleaners or solvents. Please wait 2 seconds before removing the glass under the dispenser to prevent spills.

If the Refrigerator door opens, the Dispenser does not work. When Cubed Ice is selected after using the Crushed Ice mode, a small amount of

residual crushed ice might be produced.

Cubed Crushed Water Ice Off Ice Off

No ICE

Select this if you want

to turn ice maker off.

_PUSH

CAUTION

Normal Use To fill the ice bucket to maximum capacity after installation,

make sure to do the following steps.

1. Allow your refrigerator to operate and cool down for 24 hours (or 1 full day).

2. Waiting 24 hours will allow your ice maker to cool properly.

3. Dispense 4 to 6 ice cubes into the glass. Testbutton \

4. After 8 and 16 hours, dispense a full glass of ice.

If a power failure occurs, ice cubes may melt then freeze together when the power comes back on, causing the dispenser to be out of order.

To prevent this problem, pull out the ice bucket and discard the residual ice or water.

When you dump the ice from the ice bucket, you should press the dispenser lever once with the 'ICE CUBED' or 'CRUSHED' function ON to get new ice faster after replacing the ice bucket inthe refrigerator.

If you use all the ice at once, steps 3 and 4 above must be repeated (before dispensing the first 4 to 6 ice cubes, you need to wait for 8 hours).

This will replenish the ice cubes and ensure maximum ice production.

Clqeck the

Using the water dispenser

Place a glass underneath the water outlet and push gently against the water dispenser lever with your glass. Make sure the glass is in line with the dispenser to prevent the water from splashing out.

If you have just installed the refrigerator or installed a new water filter,Flush 3 gallons through filter before use (flush approximately 6 minutes). Make sure that water flows clearly again before drinking.

level

/_ When you do not use the water dispenser for 2-3 days (especially during the summer), the dispensed

CAUTIONwater may have a funny smell or taste.

Ifthis occurs, we recommend that you discard the first 1-2 glasses of water for better taste.

Using the ice off Function

When selecting the Ice Off mode, remove all ice cubes from the bucket. Ifyou are not using the ice dispenser, the ice cubes may clump together. Pull the lock lever forward to throw away ice cubes or remove clumped ice from the bucket. Push the bucket back until you hear a click.

Use only the ice maker provided with the refrigerator.

CAUTION

The water supply to this refrigerator must only be installed/connected by a suitably qualified person and connect to a potable water supply only.

To operate the ice maker properly, water pressure of 20 - 125 psi is required.

Ifyou have a long vacation or business trip and won't use water or ice dispensers, close the water valve.

-. Otherwise, water leakage may occur.

Wipe excess moisture from inside and leave the doors open.

-. Otherwise, odor and mold may develop. Do not put your fingers, hands or any other unsuitable objects in the chute or ice-maker bucket.

- It may result in personal injury or material damage. Never put your finger or any other objects in the dispenser opening.

- It may cause injury. Do not try to disassemble the ice maker.

Do not wash or spray the ice bucket with water.

Water clouding phenomenon

All water provided to refrigerators flows through the core filter which is an alkaline water filter. In this process, the pressure in the water that has flowed out of the filter gets increased, and oxygen and

nitrogen become saturated. When this water flows out in the air, the pressure plummets and the oxygen and nitrogen get supersaturated so that they turn into gas bubbles. The water could look misty due to

these oxygen bubbles.The water may look temporarily cloudy due to these oxygen bubbles. After a few seconds, the water will look clear.

Please wait 1 second before removing the cup after dispensing water to prevent water dribble. Do not pull

out the lever dispenser after taking out ice or water. It comes back automatically. Ice is made in cubes. When you select "Crushed", the ice maker grinds the ice cubes into crushed ice.

+ 70 hidden pages