Samsung RF4287HARS User Manual
quick start guide
Product features
RF4287HA
Surround Multi Flow
Uniform cooling for each
shelf and even in corner in
fresh food compartment
by centerpositioned fan
and duct with multiple flow
effluences.
Flex Zone
The Flex Zone is a fullwidth independent mid
drawer with adjustable
temperature control.
Counter Height Design
The Independent Mid
Drawer(Flex zone) is counter
Height to fit contemporary
kitchen.
Twin Cooling System
The refrigerator and the freezer
have two evaporators.
Given this independent system,
the freezer and the refrigerator are
cooled individually as required and
are, therefore, more efficient.
Food odor from the refrigerator
does not affect food in the freezer
due to separate air flow circulation.
Two Lever Dispenser
Two lever dispenser can be get ice
or water easily.
Secure Auto Close Door
System
• Secure Auto Close Door System
• Cool tight doors
• Energy saving
• Preventing sweat on fridge doors
English
AW2간단설명서-.indd 1 2010.3.22 12:0:35 PM
The Installation Space
Selecting the best location for the refrigerator
• A location with easy access to the water supply.
• A location without direct exposure to sunlight.
• A location with a leveled oor.
• A location with enough space for the refrigerator doors to open easily.
• Allow suf cient space for air circulation of the internal cooling system.
• Allow clearance to the right, left, back and top when installing.
This will help reduce power consumption and keep your energy bills lower.
• Do not install the refrigerator where the temperature will go below 50ºF
(10ºC).
• Do not locate the refrigerator where it may become wet.
FLOORING
For proper installation, this refrigerator must be placed
on a leveled surface of hard material that is the same
height as the rest of the fl ooring. This surface should be
strong enough to support a fully loaded refrigerator, or
approximately 359lbs (165kg). To protect the fi nish of the
fl ooring, cut a large section of the cardboard carton and
place it under the refrigerator where you are working. When
moving a refrigerator, you need to pull and push it straight
forwards or back. Do not wiggle it from side to side.
CAUTION
3 inches
3/4
2 inches
2 inches
If the refrigerator does not have enough space, the internal cooling system may not work properly.
If your refrigerator has an ice maker, allow extra space at the back for the water line connections.
When you install the refrigerator next to a fi xed wall, you need a minimum clearance is 3 ¾” (95mm)
between the refrigerator and wall to allow the door to swing open.
First thing! Make sure that you can easily move your refrigerator to its fi nal location by measuring doorways
(both width and height), thresholds, ceilings, stairways, etc.
The following chart details the exact height and depth of this Samsung French Door
Refrigerator.
Model
Depth
“A”
Width
“B”
Height
“C”
Overall
Height “D”
Depth
“E”
RF4287HA
33.78”
(85.8 cm)
35.75”
(90.8 cm)
66.19”
(168 cm)
69.88”
(177.4 cm)
36.22”
(92 cm)
EE
CC
A
A
BB
DD
AW2간단설명서-.indd 2 2010.3.22 12:0:57 PM
Operating your French Door Refrigerator
(RF4287 MODEL)
USING THE CONTROL PANEL
Press the Energy Saver button for better energy effi ciency.
The Energy Saver icon lights up when you press the Energy Saver button.
The Energy Saver function is automatically set to “ON” when power is supplied to the refrigerator.
If condensation or water drops appear on the doors, turn the Energy Saver mode off.
(
1
) Energy Saver
(
2
) Power Freeze
/ Cooling Off
Mode
The
Power Freeze
function substantially speeds up the freezer compressor, causing the freezer to cool down
r
apidly to a temperature you choose. When you press the Power Freeze button, the Power Freeze
icon lights up.
Power Freeze is useful if you need to quick freeze an item, to make a large quantity of ice, or to cool
the freezer rapidly if it has warmed dramatically (for example, if the door was left open).
To turn off Power Freeze, press the Power Freeze button again. Power Freeze turns off automatically
after 21/2 hours to decrease energy consumption.
Cooling Off mode (also called Shop mode), is designed for use by retailers when they are displaying
refrigerators on the shop fl oor. In Cooling Off mode, the refrigerator's fan motor and lights work
normally, but the compressors do not run, and the refrigerator and freezer do not get cold.
To start Cooling Off mode, press and hold the Energy Saver button and the Power Freeze button for 3
seconds during normal operation. The refrigerator chime sounds and the temperature display fl ashes OF OF.
To cancel Cooling Off mode, press and hold the Energy Saver and the Power Freeze buttons again for
3 seconds.
The Alarm/Hold 3 sec for Filter Reset button serves two purposes:
- To turn the door open alarm on and off
- To reset the water fi lter life indicator.
1) Door Alarm Function
If the door alarm is set to On, an alarm beeps if any refrigerator door is left open for more than three
minutes. The beeping stops when you close the door. The door alarm function is pre-set to On in the
factory. You can turn it off by pressing and then releasing the Alarm/Hold button. You can turn it back
on in the same fashion. The icon lights up when the function is on.
2) Water Filter Life Indicator Function
After you replace the water fi lter, press and hold the Alarm/Hold 3 sec for Filter Reset button to re-set
the water fi lter life indicator. When you re-set the water fi lter life indicator, the Filter icon on the panel
turns blue, green, or yellow.
The Filter icon will turn red to let you know it is time to change the water fi lter after six months
(about 300 gallons).
Some areas have large amounts of lime in their water, which causes the water fi lter
to clog more quickly. if this is the case in your area, you will have to change the fi lter
more frequently than every six months.
(
3
) Alarm / hold 3 sec
for Filter reset
1
2
3
AW2간단설명서-.indd 3 2010.3.22 12:1:1 PM
Loading...