Samsung RF26J7510 DIMENSIONS
25.5 cu. ft. French Door
MODEL RF26J7510 DIMENSIONS
Be sure your new fridge will fit
Don't wait until delivery to be sure your new refrigerator will t – both
in your kitchen and through all doorways. This guide includes all pertinent
measurements and clearances so you can buy with condence.
WIDTH
(FITS 36" OPENING)
3
4
/
"
32
DEPTH
WITHOUT
DOOR
8
29 5/
"
DEPTH
TO DOOR
HANDLE
1
2
36
/
"
HEIGHT
WITH
HINGE
70"
DEPTH
WITHOUT
HANDLE
34"
TOP OF RE FRIGERATOR W ITH DRAWER OP EN
DEPTH
WITH D00R
OPEN 90 °
47 1/4"
WITH DRAWER
TOP OF RE FRIGERATOR W ITH DOORS O PEN 125°
DEPTH
OPEN
52 5/8"
Standard-Depth Refrigerator
Standard-depth refrigerators typically measure 30 to 35 inches in depth,
as opposed to counter-depth refrigerators that sit ush with cabinetry.
Measure height
including flooring.
Be sure to allow for
hinge clearance
height if needed.
Measure width
including countertop
overhang.
Measure depth
including molding
or trim.
125° 125°
56 1/4"
Installation clearances
3Allow 3 ¾" of clearance when installing along a wall.
This will allow for the door to open 90 degrees without
the handle contacting the wall.
3Allow 2" minimum clearance at rear for proper air
circulation and water/electrical connections.
3Allow a ⅜" minimum clearance at sides and top
for ease of installation.
For optimal usage and ability to open refrigerator doors
completely, do not install next to a wall.
Please note: The above dimension and cutout information is for planning
purposes only. For complete installation details, consult manual packed
with product or download manual online at samsung.com.
Walk the delivery route
3Identify the narrowest opening that the appliance will travel through, from outside the home to the location where it will be installed.
3Appliance depth or width must be smaller than the width of the narrowest opening.
Loading...