A high performance computer adopting the latest CPU and DDR II
memory
■ Intel Core™2 Duo Processor
DDR II Memory
■ Wireless LAN*, Bluetooth
■ 14.1” Wide LCD
, Intel Core™ Duo Processor*.
*
*
Easy-to-Use AV
Play AVStation* and AVStation Now* are provided to easily play various
multimedia files.
Sophisticated Design for Increased Usability
■ AV Now and various shortcut keys on the keyboard
■ Multi card slot
■ Luxurious design with increased usability
Note
*
The items marked with this symbol are optional items that are
*
supported depending on the computer model.
Before You Start
Before reading the User Guide, first check the following information.
User Guide Information
This product is supplied with an Installation Guide, and a
User Guide.
You can even more easily and conveniently use the
computer by using any of the guides depending on your
needs.
Installation Guide
This guide is provided so that you can conveniently refer
to this guide when using the computer for the first time
after purchasing it.
This document includes the computer components and
the connection procedures.
User Guide
The document you are currently reading is the User
Guide. You can read it by double-clicking the icon on the
Desktop.
This document includes the computer functions, how to
use the functions, and how to use the program.
Utilizating the User Guide
Be sure to read the Safety Precautions before using
the computer.
Refer to the separately supplied Installation Guide
when installing your computer.
Refer to the User Guide for the procedures to use the
computer.
Using the Index of the User Guide, you can easily find
any information you are looking for.
Using the Glossary of the User Guide, you can easily
find meanings for technical terms.
If a problem occurs, refer to the Q & A included in the
User Guide.
■
Some devices and software referred in the User
Guide may not be provided and/or changed by
Note
upgrade.
Note that the computer environment referred in
the User Guide may not be the same as your own
environment.
■
The image used for the cover and text of the User
Guide may not be the same as actual ones.
■
This guide decribes procedures for both the
mouse and the touchpad together.
■
The figures in this guide are provided assuming
that your operating system is Windows Vista. The
figures are subject to change.
■
The User guide supplied with computer may be
varied depending on model.
3
4
Safety Precaution Notations
Copyright
IconNotationDescription
Failing to follow instructions marked with
Warning
Caution
this symbol, may cause personal injury
and or fatality.
Failing to follow instructions marked with
this symbol, may cause slight injury to
yourself or damage your property.
Text Notations
IconNotationDescription
Before
You Start
Caution
Note
Page XX
Start > All
Programs >
Samsung > User
Guide > User
Guide
Content included in this section includes
information required before using a
function.
Content included in this section includes
information required about the function.
Content included in this section includes
helpful information to use the function.
This notation represents the page
number you can refer to for information
about related functions or as a
reference.
This represents a menu path to run a
program.
Click the Start button and then select All
Programs > Samsung > User Guide >
User Guide in this order from the menu.
Samsung Electronics Co., Ltd. owns the copyright of this
manual.
No part of this manual may be reproduced or transmitted in any
form or by any means, electronic or mechanical, without the
consent of Samsung Electronics Co., Ltd.
The information in this document is subject to change without
notice due to improving the performance of the product.
Samsung Electronics shall not be liable for any data loss. Please
take care to avoid losing any important data and backup your
data to prevent any such data loss.
Precautions for Operating System Support
The operating system (OS) installed on this product is the
latest version of Windows Vista. You cannot install an operating
system other than Windows Vista as well as any unauthorized
copy of Windows Vista.
Example) When trying to install Windows Vista Home Premium
when Windows Vista Home Basic is already installed.
Other operating systems (Windows 98, Windows ME, Windows
2000, Windows 2003 server, UNIX and LINUX, other Windows
Vista versions, etc.) other than the operating system already
installed on this computer are not supported.
If a problem occurs because of the installation of another
operating system, the company will not provide technical
support, a replacement or refund, and if our service engineer
visits you due to this problem, a service charge will be applied.
In addition, installing a program that does not support Windows
Vista, may cause the program to not work properly.
In this case, ask the corresponding software manufacturer about
the problem. If you request our services to resolve a problem
caused by incompatible software, a service charge will be
applied.
Contents
Chapter 1. Getting Started
Product Features 2
Before You Start
Contents 5
Safety Precautions 6
Proper Posture During Computer Use 1
Important Safety Information 1
Replacement Parts and Accessories 2
Regulatory Compliance Statements 2
WEEE SYMBOL INFORMATION 3
Overview 3
Front View 33
Status Indicators 34
Right View 35
Left View 36
Back View 37
Bottom View 38
Turning the Computer On and Off 3
Turning the computer on 39
Turning the computer off 39
Chapter 2. Using the Computer
Keyboard 41
Touchpad 4
CD Drive 47
Inserting and Ejecting a CD 47
Burning a CD 48
HD DVD (Optional) 49
Blu-ray (Optional) 51
Multi Card Slot 5
PCI ExpressCard Slot 5
Connecting a Monitor 5
Connecting a Monitor 57
Viewing Through a Monitor 58
Samsung Update Plus (Optional) 106
Play AVStation (Optional) 10
Launching and Screen Layouts 108
Movie Station 109
Music Station 113
3
6
7
9
3
Photo Station 117
AVStation Now (Optional) 12
Start 121
Exit 121
Screen Layout 121
Chapter 6. Settings and Upgrade
LCD Brightness Control 123
BIOS Setup 124
Entering the BIOS Setup 124
The BIOS Setup Screen 126
Setting a Boot Password 12
Changing the Boot Priority 13
Upgrading Memory 13
Battery 133
Installing/Removing the Battery 133
Charging the Battery 134
Measuring the Remaining Battery
Charge 134
Extending the Battery Usage Time 135
Using the Security Lock Port 13
Chapter 7. Windows Media Center
About Package Contents and the
9
Program Guide 140
Connecting and Setting Up Media
1
Center 141
Optional Devices 141
Using Media Center 14
5
6
Start Screen Layout 145
Pictures + Videos 146
Music 150
TV + Movies 154
Chapter 8. Appendix
Using McAfee SecurityCenter (Optional)
Using Samsung Magic Doctor (Optional)
4
Reinstalling Software 16
Q & A 163
8
1
8
0
1
Display Related 163
Modem Related 164
Wired Network (LAN) Related 166
Wireless Network (WLAN) Related 167
Game and Program Related 171
Bluetooth 171
HD DVD 172
Blu-ray 173
Other 175
About Intel Media Sharing Software
(Only for some models) 176
Product Specifications 177
Glossary 18
Index 18
Contact SAMSUNG WORLD WIDE 18
8
5
158
159
1
3
7
8
5
6
Safety Precautions
For your security and to prevent damage, please read the following safety instructions carefully.
Since this is commonly applied to Samsung Computers, some figures may differ from actual ones.
Warning
Failing to follow instructions marked with this symbol may cause personal injury and even fatality.
Installation RelatedPower Related
The power plug and wall
outlet figures may differ
depending on the country
specifications and the
product model.
Do not install the product in
places exposed to humidity
such as a bathrooms.
There is a danger of electric
shock. Use the product within the
operating conditions specified in
the Manufacturers User Guide.
Keep the plastic bags out of the
reach of children.
There is a danger of suffocation.
Keep a distance of 15cm or
more between the computer and
the wall and do not place any
objects between them.
This may increase the internal
temperature of the computer and
may cause an injury.
Do not install the computer
on a slant or a place prone to
vibrations, or avoid using the
computer in that location for a
long time.
This increases the risk that a
malfunction or damage to the
product will occur.
Do not touch the mains
plug or power cord with wet
hands.
There is a danger of electric
shock.
Do not exceed the standard
capacity (voltage/current) of
a multi-plug or power outlet
extension when using it for
the product.
There is a danger of electric
shock or fire hazard.
If the power cord or power outlet
makes a noise, disconnect the
power cord from the wall outlet
and contact a service center.
There is a danger of electric shock
or fire hazard.
Plug the power cord firmly into
the power outlet and AC adapter.
Failing to do so may cause fire
hazard.
Do not bend the power cord
excessively or do not place a
heavy object over the power
cord. It is especially important to
keep the power cord out of reach
of infants and pets.
If the cord is damaged, it may
cause electric shock or fire.
Use a wall outlet or multi-plug
with a grounding part.
Do not use a damaged or loose
mains plug or power cord or
power outlet.
There is a danger of electric shock
or fire hazard.
Do not unplug the power cord
out by pulling the cable only.
If the cord is damaged, it may
cause electric shock.
7
Failing to do so may cause electric
shock hazard.
8
If water or another substance
enters the power input jack,
AC adapter or the computer,
disconnect the power cord and
contact the service center.
Damage to the device within the
computer may cause electric
shock or fire hazard.
Battery Usage Related
Keep the battery out of the
reach of infants and pets, as
they could put the battery into
their mouths.
There is a danger of electric
shock or choking.
Usage Related
Disconnect all cables
connected to the computer
before cleaning it. If you are
using a notebook computer,
remove the battery.
There is a danger of electric
shock or damage to the product.
Do not connect a phone line
connected to a digital phone to
the modem.
There is a danger of a electric
shock, fire or damage to the
product.
Upgrade Related
Do not place any container filled
with water or chemicals over or
near the computer.
If water or chemicals enter the
computer, this may cause fire or
electric shock.
If the computer is broken or
dropped, disconnect the power
cord and contact a service
center for a safety check.
Using a broken computer may
cause electric shock or fire hazard.
Avoid direct sunlight when
the computer is in an air-tight
location such as inside a
vehicle.
There is a danger of a fire hazard.
The computer may overheat and
also present opportunity to thieves.
Never disassemble the power
supply or AC adapter.
There is a danger of electric
shock.
When removing the RTC (Real
Time Clock) battery, keep it out
of the reach of children as they
could touch and/or swallow it.
There is a danger of choking. If a
child has swallowed it, contact a
doctor immediately.
Use only authorized
parts (multi-plug, battery
and memory) and never
disassemble parts.
There is a danger of damaging
the product, electric shock or fire
hazard.
9
10
Shut down the computer and
disconnect all cables before
disassembling the computer. If
there is a modem, disconnect
the phone line. If you are using
a notebook computer, make
sure to remove the battery.
Failing to do so, may cause
electric shock.
Custody and
Movement Related
Follow the instructions for the
relevant location (e.g. airplane,
hospital, etc.) when using a
wireless communication device
(wireless LAN, Bluetooth, etc.).
Caution
Failing to follow instructions marked with this symbol may cause slight injury or damage to the product.
Installation RelatedBattery Usage Related
Do not block the ports (holes),
vents, etc. of the product and
do not insert objects.
Damage to a component within
the computer may cause electric
shock or fire.
When using the computer with
it lying on its side, place it so
that the vents face upwards.
Failing to do so, may cause
the internal temperature of
the computer to rise and the
computer to malfunction or halt.
Do not place a heavy object
over the product.
This may cause a problem with
the computer. In addition, the
object may fall and cause injury,
or damage the computer.
Dispose of worn-out batteries
properly.
- There is a danger of fire or
explosion.
- The battery disposal method may
differ depending on your country
and region. Dispose of the used
battery in an appropriate way.
Do not throw or disassemble
the battery and do not put it into
water.
This may cause an injury, fire or
explosion.
Use only a battery authorized by
Samsung Electronics.
Failing to do so may cause an
explosion.
Avoid contact with metal objects
such as car keys or clips when
keeping or carrying a battery.
excessive current and a high
temperature and may damage the
battery or cause a fire.
Charge the battery according to
the instructions in the manual.
Failing to do so, may cause and
explosion or fire from damage to
the product.
Do not heat the battery or
expose it to heat (e.g. inside a
vehicle during the summer).
There is a danger of explosion or
fire.
Contact with a metal may cause
11
12
Usage Related
Do not place a candle, lighted
cigar, etc. over or on the product.
There is a danger of fire.
Make sure to have the product
tested by a safety service
engineer after repairing the
product.
Authorised Samsung Repair
Centers will carry out safety checks
after a repair. Using a repaired
product without testing it for safety
might cause electric shock or fire.
In case of lightning, immediately
turn the system off, disconnect
the power cord from the wall
outlet and line do not use a
modem or phone.
There is a danger of electric shock
or fire.
Connect only permitted devices
to the connectors or ports of the
computer.
Failing to do so, may cause electric
shock and fire.
Close the LCD panel only
after checking if the notebook
computer is turned off.
The temperature may rise and
it may cause overheating and
deformation of the product.
Do not press the Eject Button
while the Floppy Disk/CD-ROM
drive is in operation.
You might lose data and the disk
might be suddenly ejected and
could cause an injury.
Take care not to drop the product
while using it.
This may cause personal injury or
loss of data.
Do not contact the antenna with
electricity facility such as the
power outlet.
There is a danger of electric shock.
When handling computer parts,
follow the instructions on the
manual supplied with the parts.
Failing to do so, may cause damage
to the product.
If the computer emits smoke,
or there is a burning smell,
disconnect the power plug from
the wall outlet and contact a
service center. If your computer
is a notebook computer, make
sure to remove the battery.
There is a danger of fire.
Do not use a damaged or
modified CD/Floppy Disk.
There is a danger of damaging the
product or personal injury.
Do not insert your fingers into
the PC Card Slot.
There is a danger of injury or
electric shock.
Use recommended computer
cleansing solution when cleaning
the product and only use the
computer when it is completed
dried.
Upgrade Related
Failing to do so may cause
electric shock or fire.
Emergency disk eject method
using paperclip should not
be used while the disk is in
mothion. Make sure to use the
emergency disk eject method
only when the Optical Disk
Drive is stopped.
There is a danger of injury.
Do not place your face close
to the Optical Disk Drive tray
when it is operating.
There is a danger of injury due to
an abrupt ejection.
Check CDs for cracks and
damage prior to use.
It may damage the disc and
cause disorder of device and
injury of user.
Take care when touching the
product or parts.
The device may be damaged or
you may be injured.
Take care not to throw or drop a
computer part or device.
This may cause injury or damage
to the product.
Make sure to close the computer
cover before connecting the
power after a reassembly.
There is a danger of electric shock
if your body touches an internal
part.
Use parts authorized by
Samsung Electronics only.
Failing to do so, may cause fire or
damage the product.
Never disassemble or repair the
product by yourself.
There is a danger of electric shock
or file.
To connect a device that is not
manufactured or authorized by
Samsung Electronics, enquire
at your service center before
connecting the device.
There is a danger of damaging the
product.
13
14
Custody and Movement
Related
Cautions on Preventing Data Loss
(Hard Disk Management)
When moving the product, turn
the power off and separate all
connected cables first.
The product might be damaged or
users may trip over the cables.
For long periods of not using
the notebook computer,
discharge the battery and
preserve as it is detached.
The battery will be preserved at
its best condition.
Do not operate or watch the
computer while driving a
vehicle.
This may cause a traffic accident.
Concentrate on driving.
Take care not to damage the
data on a hard disk drive.
■ A hard disk drive is so sensitive
to external impact that an
external impact may cause loss
of data on the surface of the
disk.
■ Take extra care, because
moving the computer or an
impact on the computer when
it is turned on may damage the
data of the hard disk drive.
■ The company is not liable for
the loss of any data caused
by customer such as the
carelessness usage or bad
environmental condition.
Causes that may damage the
data of a hard disk drive and the
hard disk drive itself.
■ The data may be lost when an
external impact is applied to
the disk while disassembling or
assembling the computer.
■ The data may be lost when the
computer is turned off or reset
by a power failure while the
hard disk drive is operating.
■ The data may be lost and
irrecoverable due to a computer
virus infection.
■ The data may be lost if the
power is turned off while
running a program.
■ Moving or causing an impact
to the computer while the hard
disk drive is operating, may
cause files to be corrupted or
bad sectors on the hard disk.
To prevent data loss due to damage to the hard disk drive, please
backup your data frequently.
Proper Posture During Computer Use
Maintaining a proper posture during computer use is very important to prevent physical harm.
The following instructions are about maintaining a proper posture during computer use developed through human
engineering. Please read and follow them carefully when using the computer.
Otherwise, the probability of (RSI: Repetitive Strain Injury) from repeated operations may increase and serious
physical harm may be caused.
The instructions in this manual have been prepared so that they can be applied within the coverage of general users. If the user
is not included in the coverage, the recommendation is to be applied according to the user’s needs.
Note
Since this is commonly applied to Samsung Computers, some figures may differ from actual ones.
Proper Posture
Adjust the heights of desks and chairs appropriate to
your height.
The heights are to be adjusted so that your arm forms a
right angle when you place your hand over the keyboard
while sitting down on a chair.
Adjust the height of chair so that your heel is comfortably
placed on the floor.
■ Do not use the computer while you are lying down, but
only while you are sitting down.
■ Do not use the computer on your lap. If the computer
temperature increases, there is a danger of burning
yourself.
■ Work while keeping your wrist straight.
■ Use a chair with a comfortable back.
■ Keep the center of your leg weight not on the chair but
on your feet when you are sitting on a chair.
■ To use the computer while talking over the telephone,
use a headset. Using the computer with the phone on
your shoulder is bad for posture.
■ Keep frequently used items within a comfortable work
range (where you can reach them with your hands).
15
16
Eye Position
Hand Position
Keep the monitor or LCD away from your eyes by at
least 50cm.
50cm
■ Adjust the height of the monitor and the LCD screen so
that its top height is equal to or lower than your eyes.
■ Avoid setting the monitor and LCD excessively bright.
■ Keep the monitor and LCD screen clean.
■ If you wear glasses, clean them before using the
computer.
■ When entering contents printed on a paper into the
computer, use a static paper holder so that the height
of the paper is almost equal to that of the monitor.
Keep your arm at a right angle as shown by the figure.
■ Keep the line from your elbow to your hand straight.
■ Do not place your palm over the keyboard while typing.
■ Do not hold the mouse with excessive force.
■ Do not press the keyboard, touchpad or mouse with
excessive force.
■ It is recommended connecting an external keyboard
and mouse when using the computer for long periods
of time.
Volume Control
(Headphones and Speakers)
Illumination
Check your volume first to listen to music.
Check your
volume!!
■ Check if the volume is too loud before using
headphones.
■ It is not recommended using headphones for long
periods of time.
■ Do not use the computer in dark locations. The
illumination level for computer use must be as bright
so for reading a book.
■ Indirect illumination is recommended. Use a curtain to
prevent reflection on the LCD screen.
Operation Condition
■ Do not use the computer in hot and humid locations.
■ Use the computer within the allowed temperature and
humidity range specified in the User Guide.
Use Time (Break Time)
■ Take a break for 10 minutes or more after a 50-minute
period when working for more than one hour.
17
18
Important Safety Information
Safety instructions
Your system is designed and tested to meet the latest
standards for safety of information technology equipment.
However, to ensure safe use of this product, it is important
that the safety instructions marked on the product and in
the documentation are followed.
Always follow these instructions to help guard
against personal injury and damage to your system.
Caution
Setting Up your System
■ Read and follow all instructions marked on the product
and in the documentation before you operate your
system. Retain all safety and operating instructions for
future use.
■ Do not use this product near water or a heat source
such as a radiator.
■ Set up the system on a stable work surface.
■ Openings in the computer case are provided for
ventilation. Do not block or cover these openings.
Make sure you provide adequate space, at least 6
inches (15 cm), around the system for ventilation when
you set up your work area.
Never insert objects of any kind into the computer
ventilation openings.
■ Ensure that the fan vents on the bottom of the casing
are clear at all times. Do not place the computer on a
soft surface, doing so will block the bottom vents.
■ If you use an extension cord with this system, make
sure that the total power rating on the products
plugged into the extension cord does not exceed the
extension cord power rating.
■ The product should be operated only with the type of
power source indicated on the rating label.
■ Ensure that the electrical outlet you are using to power
your equipment is easily accessible in case of fire or
short circuit.
■ If your computer has a voltage selector switch, make
sure that the switch is in the proper position for your
area.
Care During Use
■ Do not walk on the power cord or allow anything to rest
on it.
■ Do not spill anything on the system. The best way to
avoid spills is to not eat or drink near your system.
The Instruction On Safety Operation of
computer
When installing and operating devices please refer to
1
safety requirements in the user guide.
■ Some products have a replaceable CMOS battery on
the system board. There is a danger of explosion if
the CMOS battery is replaced incorrectly. Replace the
battery with the same or equivalent type recommended
by the manufacturer.
Dispose of batteries according to the manufacturers
instructions. If the CMOS battery requires replacement
insure that a qualified technician performs the task.
■ When the computer is turned off, a small amount of
electrical current still flows through the computer. To
avoid electrical shock, always unplug all power cables,
remove the battery and modem cables from the wall
outlets before cleaning the system.
■ Unplug the system from the wall outlet and refer
servicing to qualified personnel if:
– The power cord or plug is damaged.
– Liquid has been spilled into the system.
– The system does not operate properly when the operating
instructions are followed.
– The system was dropped or the casing is damaged.
– The system performance changes.
Devices can be used only with the equipment
2
specified in the technical specifications of the
devices.
If any smell of burning or smoke from the computer
3
the unit should be switched off and battery removed.
The unit should be checked by a qualified technician
before reuse.
Service and repair of devices should be carried out
4
by authorized service centers.
19
20
Replacement Parts and Accessories
Use only replacement parts and accessories recommended by manufacturer.
To reduce the risk of fire, use only No. 26 AWG or larger telecommunications line cord.
Caution
Do not use this product in areas classified as hazardous. Such areas include patient care areas of medical and dental facilities,
Note
oxygen rich environments, or industrial areas.
Battery Disposal
Do not put rechargeable batteries or products
powered by non-removable rechargeable batteries
Caution
Contact the Samsung Helpline for information on how to
dispose of batteries that you cannot use or recharge any
longer.
Follow all local regulations when disposing of old
batteries.
Caution
in the garbage.
THERE IS A RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO
THE INSTRUCTIONS
Laser Safety
All systems equipped with CD or DVD drives comply with
the appropriate safety standards, including IEC 60825-
1. The laser devices in these components are classified
as “Class 1 Laser Products” under a US Department
of Health and Human Services (DHHS) Radiation
Performance Standard. Should the unit ever need
servicing, contact an authorized service location.
■
Laser Safety Note:
Use of controls or adjustments or performance
Caution
of procedures other than those specified in
this manual may result in hazardous radiation
exposure. To prevent exposure to laser beams,
do not try to open the enclosure of a CD or DVD
drive.
■
Class 1M laser radiation when operating part is
open.
Do not view directly with optical instruments.
■
Class 3B invisible laser radiation when open.
Avoid exposure to the beam.
Connect and Disconnect the AC
adapter
General Requirements
The requirements listed below are applicable to all
countries:
The socket-outlet shall be installed near the equipment
and shall be easily accessible.
Do not unplug the power cord out by pulling the cable
only.
Power Cord Requirements
The power cord set (wall plug, cable and AC adapter plug)
you received with your computer meets the requirements
for use in the country where you purchased your
equipment.
Power cord sets for use in other countries must meet the
requirements of the country where you use the computer.
For more information on power cord set requirements,
contact your authorized dealer, reseller, or service
provider.
■ The length of the power cord set must be at least 6.00
feet (1.8m) and a maximum of 9.75 feet (3.0m).
■ All power cord sets must be approved by an
acceptable accredited agency responsible for
evaluation in the country where the power cord set will
be used.
■ The power cord set must have a minimum current
capacity of 7 A and a nominal voltage rating of 125
or 250 volts AC, as required by each country’s power
system.
■ The appliance coupler must meet the mechanical
configuration of an EN 60 320/IEC 320 Standard Sheet
C7 connector, for mating with appliance inlet on the
computer.
21
22
Regulatory Compliance Statements
Wireless Guidance
Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4
GHz Band, may be present (embedded) in your notebook system. The following section is a general overview of
considerations while operating a wireless device.
Additional limitations, cautions, and concerns for specific countries are listed in the specific country sections (or country
group sections). The wireless devices in your system are only qualified for use in the countries identified by the Radio
Approval Marks on the system rating label. If the country you will be using the wireless device in, is not listed, please
contact your local Radio Approval agency for requirements. Wireless devices are closely regulated and use may not be
allowed.
The RF field strength of the wireless device or devices that may be embedded in your notebook are well below all
international RF exposure limits as known at this time. Because the wireless devices (which may be embedded into your
notebook) emit less energy than is allowed in radio frequency safety standards and recommendations, manufacturer
believes these devices are safe for use. Regardless of the power levels, care should be taken to minimize human contact
during normal operation.
As a general guideline, a separation of 20 cm (8 inches) between the wireless device and the body, for use of a wireless
device near the body (this does not include extremities) is typical. This device should be used more than 20 cm (8 inches)
from the body when wireless devices are on and transmitting. (This Statement is not applicable to UMPC(Ultra Mobile
PC) such as PDA, Portable PC.)
This transmitter must not be collocated or operate in conjunction with any other antenna or transmitter except the installed
Bluetooth transmitter.
Some circumstances require restrictions on wireless devices. Examples of common restrictions are listed below:
Caution
■
Radio frequency wireless communication can interfere with equipment on commercial aircraft. Current aviation regulations
require wireless devices to be turned off while traveling in an airplane.
802.11B (also known as wireless Ethernet or Wifi) and Bluetooth communication devices are examples of devices that
provide wireless communication.
■
In environments where the risk of interference to other devices or services is harmful or perceived as harmful, the
option to use a wireless device may be restricted or eliminated. Airports, Hospitals, and Oxygen or flammable gas laden
atmospheres are limited examples where use of wireless devices may be restricted or eliminated. When in environments
where you are uncertain of the sanction to use wireless devices, ask the applicable authority for authorization prior to use or
turning on the wireless device.
■
Every country has different restrictions on the use of wireless devices. Since your system is equipped with a wireless
device, when traveling between countries with your system, check with the local Radio Approval authorities prior to any
move or trip for any restrictions on the use of a wireless device in the destination country.
■
If your system came equipped with an internal embedded wireless device, do not operate the wireless device unless all
covers and shields are in place and the system is fully assembled.
■
Wireless devices are not user serviceable. Do not modify them in any way. Modification to a wireless device will void the
authorization to use it. Please contact manufacturer for service.
■
Only use drivers approved for the country in which the device will be used. See the manufacturer System Restoration Kit, or
contact manufacturer Technical Support for additional information.
23
24
United States of America
USA and Canada Safety Requirements
and Notices
Do not touch or move antenna while the unit is
transmitting or receiving.
Do not hold any component containing the radio such that
the antenna is very close or touching any exposed parts
of the body, especially the face or eyes, while transmitting.
Do not operate the radio or attempt to transmit data
unless the antenna is connected; if not, the radio may be
damaged.
Use in specific environments:
The use of wireless devices in hazardous locations is
limited by the constraints posed by the safety directors of
such environments.
The use of wireless devices on airplanes is governed by
the Federal Aviation Administration (FAA).
The use of wireless devices in hospitals is restricted to the
limits set forth by each hospital.
Other Wireless Devices
Safety Notices for Other Devices in the Wireless
Network: Refer to the documentation supplied with
wireless Ethernet adapters or other devices in the
wireless network.
The Part 15 radio device operates on a noninterference basis with other devices operating at
Caution
this frequency. Any changes or modification to said
product not expressly approved by Intel could void
the user’s authority to operate this device.
Unintentional Emitter per FCC Part 15
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:(1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Caution
Caution
Explosive Device Proximity Warning
Do not operate a portable transmitter (such as a
wireless network device) near unshielded blasting
caps or in an explosive environment unless the
device has been modified to be qualified for such
use.
Use On Aircraft Caution
Regulations of the FCC and FAA prohibit airborne
operation of radio-frequency wireless devices
because their signals could interfere with critical
aircraft instruments.
Caution
This equipment has been tested and found to
comply with the limits for a Class B digital device
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generate uses and can
radiate radio frequency energy and if not installed
and used in accordance with the instructions may
cause harmful interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
■
Reorient or relocate the receiving antenna.
■
Increase the separation between the equipment
and receiver.
■
Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
■
Consult the dealer or an experienced radio/TV
technician for help.
Intentional emitter per FCC Part 15
Low power, Radio LAN type devices (radio frequency (RF)
wireless communication devices), operating in the 2.4
GHz Band, may be present (embedded) in your notebook
system. This section is only applicable if these devices are
present. Refer to the system label to verify the presence
of wireless devices.
Wireless devices that may be in your system are only
qualified for use in the United States of America if an FCC
ID number is on the system label.
The FCC has set a general guideline of 20 cm (8 inches)
separation between the device and the body, for use of
a wireless device near the body (this does not include
extremities). This device should be used more than 20
cm (8 inches) from the body when wireless devices are
on. The power output of the wireless device (or devices),
which may be embedded in your notebook, is well
below the RF exposure limits as set by the FCC. (This
Statement is not applicable to UMPC(Ultra Mobile PC)
such as PDA, Portable PC.)
If necessary, the user should consult the dealer or an
experienced radio/television technician for additional suggestions. The user may find the following booklet helpful:
“Something About Interference.”
This is available at FCC local regional offices. Our com
pany is not responsible for any radio or television interference caused by unauthorized modifications of this
equipment or the substitution or attachment of connecting
cables and equipment other than those specified by our
company. The correction will be the responsibility of the
user. Use only shielded data cables with this system.
This transmitter must not be collocated or operate in
conjunction with any other antenna or transmitter except
the installed Bluetooth transmitter.
Operation of this device is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that may
cause undesired operation of the device.
25
26
Wireless devices are not user serviceable. Do not
modify them in any way.
Caution
Caution
Modification to a wireless device will void the
authorization to use it. Contact manufacturer for
service.
FCC Statement for Wireless LAN use:
“While installing and operating this transmitter and
antenna combination the radio frequency exposure
limit of 1mW/cm2 may be exceeded at distances
close to the antenna installed. Therefore, the user
must maintain a minimum distance of 20cm from
the antenna at all times.
This device can not be colocated with another
transmitter and transmitting antenna.” (This
Statement is not applicable to UMPC(Ultra Mobile
PC) such as PDA, Portable PC.)
FCC Part 68
(If fitted with a modem device.)
This equipment compiles with part of the FCC rules.
On the back of this equipment is a label that contains,
among other information, the FCC registration number
and ringer equivalence number (REN) for this equipment.
If requested, this information must be provided to the
telephone company.
This equipment uses the following USOC jacks : RJ11C
An FCC compliant telephone cord and modular plug is
provided with this equipment. This equipment is designed
to be connected to the telephone network or promises
wiring using a compatible modular jack which is Part 68
compliant. See Installation Instructions for details.
The REN is used to determine the quantity of devices
which may be connected to telephone line. Excessive
RENs on the telephone line may result in the devices
not ringing in response to an incoming call. In most, but
not all areas, the sum of RENs should not exceed five
(5.0). To be certain of the number of devices that may be
connected to a line, as determined by total RENs, contact
the local telephone company to determine the maximum
REN for the calling area.
If the terminal equipment causes harm to the telephone
network, the Telephone Company will notify you in
advance that temporary discontinuance of service may
be required. But if advance notice is not practical, the
telephone company will notify the customer as soon as
possible. Also, you will be advised of your right to file a
complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its
facilities, equipment, operations, or procedures that could
affect the operation of the equipment. If this happens,
the telephone company will provide advanced notice in
order for you to make necessary modifications to maintain
uninterrupted service.
If trouble is experienced with this equipment (Modem)
for repair or warranty information, please contact your
local distributor. If the equipment is causing harm to the
telephone network, the telephone company may request
that you disconnect the equipment until the problem is
resolved.
The user must use the accessories and cables supplied
by the manufacturer to get optimum performance from the
product.
No repairs may be done by the customer.
Canada
This equipment cannot be used on public coin phone
service provided by the telephone company. Connection
to party line service is subject to state tariffs.
The Telephone Consumer Protection Act of 1991 makes
it unlawful for any person to use a computer or other
electronic device, including fax machines, to send any
message unless such message clearly contains in a
margin at the top or bottom of each transmitted page or on
the first page of the transmission, the date and time it is
sent and an identification of the business or other entity, or
other individual sending the message and the telephone
number of the sending machine or such business, other
entity, or individual. (The telephone number provided may
not be any number for which charges exceed local or
long-distance transmission charges.)
In order to program this information into your fax machine,
refer to your communications software user manual.
Unintentional Emitter per ICES-003
This digital apparatus does not exceed the Class B limits
for radio noise emissions from digital apparatus as set out
in the radio interference regulations of Industry Canada.
Le présent appareil numérique n’émet pas de bruits
radioélectriques dépassant les limitesapplicables aux
appareils numériques de Classe B prescrites dans le
règlement sur le brouillage radioélectrique édicté par
Industrie Canada.
Intentional Emitter per RSS 210
Low power, Radio LAN type devices (radio frequency (RF)
wireless communication devices), operating in the 2.4
GHz Band, may be present (embedded) in your notebook
system. This section is only applicable if these devices are
present. Refer to the system label to verify the presence
of wireless devices.
Wireless devices that may be in your system are only
qualified for use in Canada if an Industry Canada ID
number is on the system label.
As a general guideline, a separation of 20 cm (8 inches)
between the wireless device and the body, for use of
a wireless device near the body (this does not include
extremities) is typical. This device should be used more
than 20 cm (8 inches) from the body when wireless
devices are on.
The power output of the wireless device (or devices),
which may be embedded in your notebook, is well below
the RF exposure limits as set by Industry Canada.
27
28
European Union
European Union CE Marking and
Compliance Notices
Products intended for sale within the European Union are
marked with the Conformité Européene (CE) Marking,
which indicates compliance with the applicable Directives
and European standards and amendments identified
below. This equipment also carries the Class 2 identifier.
The following information is only applicable to systems
labeled with the CE mark .
European Directives
This Information Technology Equipment has been
tested and found to comply with the following European
directives:
■ EMC Directive 89/336/EEC with amending
directives 92/31/EEC & 93/68/EEC as per
– EN 55022 Class B
– EN 61000-3-2
– EN 61000-3-3
– EN 55024
■ Low Voltage Directive (Safety) 73/23/EEC as per EN
60950(A1/A2/A3/A4/A11)
■ Radio and Telecom Terminal Equipment Directive
199/5/EC as per
– CTR21 (if fitted with a modem device)
– ETS 300 328 (if fitted with a 2.4 GHz band embedded
wireless device)
– ETS 301 489-1 (if fitted with a 2.4 GHz band embedded
wireless device)
– ETS 301 489-17 (if fitted with a 2.4 GHz band embedded
wireless device)
European Radio Approval Information
(for products fitted with EU-approved
radio devices)
This Product is a Notebook computer; low power,
Radio LAN type devices (radio frequency (RF) wireless
communication devices), operating in the 2.4 GHz band,
may be present (embedded) in your notebook system
which is intended for home or office use. This section is
only applicable if these devices are present. Refer to the
system label to verify the presence of wireless devices.
Wireless devices that may be in your system are only
qualified for use in the European Union or associated
areas if a CE mark with a Notified Body Registration
Number and the Alert Symbol is on the system label.
The power output of the wireless device or devices that
may be embedded in you notebook is well below the
RF exposure limits as set by the European Commission
through the R&TTE directive.
See 802.11b and 802.11g restrictions for specific
countries or regions within countries under the
Caution
heading “European Economic Area Restrictions”
below.
Translated Statements of Compliance
[English]
This product follows the provisions of the European Directive 1999/5/EC.
[Danish]
Dette produkt er i overensstemmelse med det europæiske
direktiv 1999/5/EC
[Dutch]
Dit product is in navolging van de bepalingen van Europees Directief 1999/5/EC.
[Finnish]
Tämä tuote noudattaa EU-direktiivin 1999/5/EC määräyksiä.
[French]
Ce produit est conforme aux exigences de la Directive
Européenne 1999/5/EC.
[German]
Dieses Produkt entspricht den Bestimmungen der Europäischen Richtlinie 1999/5/EC
[Greek]
Το προϊόν αυτό πληροί τις προβλέψεις της Ευρωπαϊκής
Οδηγίας 1999/5/ΕC.
[Icelandic]
Þessi vara stenst reglugerð Evrópska Efnahags Bandalagsins númer 1999/5/EC
[Italian]
Questo prodotto è conforme alla Direttiva Europea
1999/5/EC.
[Norwegian]
Dette produktet er i henhold til bestemmelsene i det europeiske direktivet 1999/5/EC.
[Portuguese]
Este produto cumpre com as normas da Diretiva Européia
1999/5/EC.
[Spanish]
Este producto cumple con las normas del Directivo Europeo 1999/5/EC.
[Swedish]
Denna produkt har tillverkats i enlighet med EG-direktiv
1999/5/EC.
European Economic Area Restrictions
Local Restriction of 802.11b/802.11g Radio Usage
[Note to integrator: The following statements on
local restrictions must be published in all end-user
documentation provided with the system or product
incorporating the Intel PRO/Wireless 2200BG Network
Connection product.]
Due to the fact that the frequencies used by
802.11b/802.11g wireless LAN devices may not yet
Caution
The European variant is intended for use throughout the
European Economic Area. However, authorization for use
is further restricted in particular countries or regions within
countries, as follows:
be harmonized in all countries, 802.11b/802.11g
products are designed for use only in specific
countries or regions, and are not allowed to be
operated in countries or regions other than those of
designated use.
As a user of these products, you are responsible
for ensuring that the products are used only in the
countries or regions for which they were intended
and for verifying that they are configured with the
correct selection of frequency and channel for
the country or region of use. Any deviation from
permissible settings and restrictions in the country
or region of use could be an infringement of local
law and may be punished as such.
29
Loading...
+ 160 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.