Samsung QH49R User Manual

Smart Signage User Manual (By Model)

ThismanualprovidesinformationaboutyourSmartSignage includingsupportedtypesandproductspecificationspermodel.

QH43R QH49R QH55R QH65R QH75R

The colour and the appearance may differ depending on the product, and the content in the manual is subject to change without prior notice to improve the performance.

An administration fee may be charged in the following situations:

(a)An engineer is called out at your request, but it is found that the product has no defect (i.e., where the user manual has not been read).

(b)You bring the unit to a repair centre, but it is found that the product has no defect (i.e., where the user manual has not been read).

You will be informed of the administration fee amount before a technician visits.

© Samsung Electronics

Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Trademarks other than Samsung Electronics are property of their respective owners.

Table of contents

Preparations

Checking the Components	3
Parts	4
Ports	5
Control menu	6
Before Installing the Product (Installation
Guide)	7
Tilting Angle and Rotation	7
Ventilation	7
Installing the Wall Mount	8
Preparing before installing Wall-Mount	8
Installing the Wall Mount	8
Wall Mount Kit Specifications (VESA)	9

Specifications

General	10
Preset Timing Modes	12

Appendix

Licence

13

2

Chapter 01

Preparations

Checking the Components

"" Contact the vendor where you purchased the product if any components are missing.

"" The appearance of the components may differ from the images shown.

"" A stand is not provided with the product. To install a stand, you can purchase one separately.

"" The RS232C adapter can be used to connect to another monitor using the D-SUB (9-pin) type RS232C cable.

		Warranty card
Quick Setup Guide				Regulatory guide			Power cord
		(Not available in some locations)

Batteries (AAA x 2)		Remote Control		RS232C adapter		HOLDER-CABLE
(Not available in some locations)						(Supported models: QH65R,
						QH75R)

Wall Mount Adapter x 4

3

Parts

Remote sensor

Power indicator

Power button

Speaker

"" The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.

	Parts	Description
		Press a button on the remote control pointing at the sensor on the front of the product
	Remote sensor	to perform the corresponding function.
		"" Using other display devices in the same space as the remote control of this product
		can cause the other display devices to be inadvertently controlled.
	Power button	Turns the product on or off.

Use the remote control within 2.5 m to 4 m from the sensor on the product at an angle of 30° from the left and right.

"" Store used batteries out of reach of children and recycle.

"" Do not use a new and used battery together. Replace both batteries at the same time.

"" Remove batteries when the remote control is not to be used for an extended period of time.

"" To enhance the IR receiver performance, connect an external IR cable (sold separately) to the IR IN port.

4