Samsung PS64F5500AM User Manual
E-MANUAL
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model______________ Serial No.______________
Contents
e-Manual Guide
Viewing the e-Manual
1 Scrolling a Page
1 Using the Top Icons
1 Returning to the Home Page
2 Searching the Index
2 Searching Pages
2 Closing the e-Manual
2 Jumping to a Menu Item
2 Updating the e-Manual
Getting Started
Aerial Connection
Video Device Connections
4 HDMI Connection
5 Component Connection
6 AV Connection
Favourite Channels
18 Add Channels
19 Remove Channels
19 Rearrange the Favourites Channels List
19 Rename a Favourites Channel List
Network Configuration
20 Wired Network
21 Dynamic versus Static IP Addresses
22 Wireless Network
23 Wireless Network Precautions
23 Network Security Protocols
Wired Network Setup
24 Automatic Wired Network Setup
25 Manual Wired Network Setup
27 Failed Wired Connection
Wireless Network Setup
28 Automatic Wireless Network Setup
29 Manual Wireless Network Setup
31 Using the WPS Button
Audio Device Connections
7 Digital Audio (Optical) Connection
8 Audio Output Connection
8 ARC (Audio Return Channel)
Computer Connection
9 HDMI Connection
9 HDMI-to-DVI Connection
Switching Between Video Sources
Programming
11 Auto Tuning
Channel Settings
12 Country (or Area)
12 Manual Tuning
14 Transfer Channel List
15 Channel Management
16 Remove Channels
31 Failed Wireless Connection
Checking the Network Status
Mobile Device Connection
34 Wi-Fi Direct
35 AllShare Settings
35 Rename the TV
16 Edit Channel Number
17 Programme Rating Lock
17 Channel Lock
17 Channel Unlock
17 Rename Analogue Channels
Controlling the TV
Using the Smart Touch Control
36 Inserting the Batteries (AAA X 2)
37 Connecting to the TV
38 Reconnecting the Smart Touch Control
38 Battery Low Alarm
39 Buttons and Descriptions
41 Special Functions
55 Voice Recognition
Voice Recognition
57 Operating Environment
57 Voice Recognition Tutorial
58 Enabling Voice Recognition
58 Basic Voice Recognition Use
59 Voice Recognition Settings
60 Interactive Voice Recognition Commands
60 Deactivating Voice Recognition
Using the touchpad
42 Dragging
42 Press
43 Flicking
43 Pressing and Holding
44 Pressing and Dragging
44 Scrolling Left/Right
45 Scrolling Up/Down
45 Changing Channels by Entering Numbers
46 Numerical Input Guide
46 Adjusting the Touchpad
46 Show Status and Notification Banner
46 Recommendations
47 History
47 Deleting History Data
47 Searching
Using the Virtual Remote Control
48 Changing the Virtual Remote Control Panel
48 Change a position of the Virtual Remote Panel
Motion Control
61 Operating Environment
62 Motion Control Environment Test
62 Motion Control Tutorial
63 Motion Control Activation
63 Using the Basic Motion Controls
64 Motion Control Options
65 Motion Control Screen
65 The Screen Composition while Viewing TV
66 The Smart Hub Screen Composition
Face Recognition
68 Operating Environment
69 Face Registration
69 Face Recognition Login
Using Peripheral Devices
71 Keyboard Connection
71 Keyboard Use
72 Mouse Connection
72 Mouse Use
48 Using the Number Panel
49 Using the Playback Control Panel
49 Using the Quick Access Panel
49 Adjusting the virtual remote control
Universal Remote Setup
50 Connecting the IR EXTENDER CABLE
52 Add the External Device
52 Using the Universal Remote Control
52 Registered External Device Management
Entering Text using the Onscreen Keypad
53 Entering Text using the QWERTY Keypad
53 Additional Features
SMART Interaction
54 Precautions
54 Face Recognition
55 TV Camera Use
55 Motion Control
TV Viewing
Timeshift
90 Precautions
TV Viewing
73 Programme Info
74 Guide
74 Change Channels
74 Recording the Current Programme
74 Change Category
74 Quick Navigation
75 Schedule Viewing
75 Schedule Recording
75 Checking the Programme Info
76 Channel List
76 Change Channels
76 Sorting
76 Genre
76 Change the Channel List
Schedule Viewing
78 Digital Channel Schedule Viewing
78 Guide
78 Programme Info
79 Analogue Channel Schedule Viewing
79 Cancel a Schedule Viewing
79 Edit Schedule List
Schedule Recording
81 Precautions
91 Activating the Timeshift function
3D TV
92 Precautions
93 Tips
93 Activating 3D Mode
94 Setting 3D Effects
PIP
Analogue Screen Calibration
96 Fine Tune
Broadcast Audio Options
97 Audio Language
97 Audio Format
97 Audio Description
Subtitles
98 Show Subtitles
99 Subtitle Options
Changing the Teletext Language
Digital Text
83 Dedicated Recording Device Setup
83 Plug & Play
83 Dedicated Recording Device Management
84 Programme Recording
84 Instant Recording
84 Guide
85 Programme Info
85 Specified Time and Date
85 Cancel the Schedule Recording function
85 Edit Timer List
Recorded Programme Playback
86 Changing the Viewing Mode
86 Filtered View
86 Playlist Creation
87 Recording Lock / Unlock
87 Deleting Saved Programmes
87 Rename
88 Device Management
88 Playing a Different Programme
TV Settings
Basic Picture Settings
100 Changing the Picture Mode
102 Picture Quality
103 Applying the Current Picture Quality Setting to Another
Input
104 Picture Size
105 Screen Position
105 4:3 Screen Size
105 Sports Mode
106 Picture Off
106 Reset Image Settings
Advanced Settings
Picture Options
88 Programme Scan
89 Additional Recorded Programme Playback Settings
Basic Sound Settings
112 Changing the Sound Mode
SMART TV Features
113 Adjusting the Sound Settings
114 Auto Volume
114 3D Audio
114 TV Installation Type
114 Resetting the Sound
Speaker Settings
115 Speaker Select
116 Samsung Audio Device Connection
116 Additional Settings
116 DTV Audio Level
117 Digital Audio Out
117 Dolby Digital Comp
Clock and Timer
118 Setting the Time
118 Auto
119 Time Offset
119 Manual
120 Sleep Timer
120 On Timer
121 Off Timer
Screen Protection and Maintenance
122 Eco Solution
123 Screen Burn Protection
123 Pixel Shift
123 Auto Protection Time
124 Scrolling
124 Side Grey
124 Auto Protection Time
Password
125 Change Password
Additional Features
126 Changing the Menu Language
127 Game Mode
127 Precautions and Restrictions
128 BD Wise
128 Menu Transparency
128 Sound Feedback
128 Panel Locking
129 Booting Logo
129 Flash Adjustment
129 DivX® Video On Demand
Smart Hub
130 Agreements Required to Use Smart Hub
131 Samsung Account
131 Creating a Samsung Account
132 Terms & Conditions, Privacy policy
132 Logging In
132 Linking a Samsung Account to Other Accounts
133 Managing Accounts
133 Resetting Smart Hub
133 Searching
133 Keyword Search
133 Setting Search Scope
Status and Notification
134 Show Status and Notification Banner
134 Voice Recognition & Motion Control Configuration
134 Samsung Account Configuration
134 Network Configuration
134 Notifications
Social
135 Social Settings
135 Checking the Application
135 Connecting a Service to a Samsung Account
136 Watching Videos
136 Friend Profile
136 Select a friend to call
136 Filters
Apps
137 Precautions
138 Installing Standard Applications
138 Launching an Application
139 Samsung Apps
139 Searching for Apps
139 Installing Applications
140 Apps Management
140 Edit My Apps
141 Deleting Applications
141 Managing Application Folders
141 Application Lock/Unlock
141 Application Update
142 Fitness
142 Creating a Profile
142 Kids
143 Web Browser
143 Social Networks
143 Linking Service Accounts
143 3D Explorer
144 Apply Picture Mode
144 Auto Ticker
144 Push Notification Settings
144 Channel-Bound Apps
144 Properties
On TV
145 On TV Settings
145 On TV Setup
145 Recommendation notice
146 Recommendation method
146 Adult Contents Block
146 Starting Smart Hub
146 Watching an On-Aerial Recommended programme
146 Scheduled Recommended Programme Info
147 Activating the Guide
147 Programme Recommendations by Time
147 Watching Recorded Programmes
Photos, Videos & Music
148 Restrictions
150 Supported File Formats
150 USB Device Connection
151 USB Device Removal
151 Playing all the Content on a Storage Device
151 Watching Recorded Programmes
Photo Playback
159 Changing the view mode
159 Slideshow
159 Slideshow Settings
160 Playlist Creation
160 Opening a Different File
160 Background Music
160 Mini Player
161 Additional Photo Playback Settings
Anynet+ (HDMI-CEC)
162 Precautions
163 Anynet+ (HDMI-CEC) Setup
163 Anynet+ (HDMI-CEC) Use
163 Switching between Anynet+ Devices
164 Anynet+ (HDMI-CEC) Device Menu
165 ARC
Mirroring Mobile Device Screens on the TV
165 Screen Mirroring
165 Mobile Device Connection
Other Information
151 Clearing the Photos, Videos & Music Screen
152 Using Networked External Storage Devices
153 Allowing DLNA Device Connections
153 AllShare
153 Exporting Contents
Video Playback
154 Changing the view mode
154 Playlist Creation
154 Opening a Different File
155 Video Scanning
155 Show Subtitles
156 Additional Video Playback Settings
Music Playback
157 Changing the view mode
157 Playlist Creation
157 Music Scanning
158 Opening a Different File
Support
166 Remote Management
166 What is Remote Support?
167 How Does it Work?
168 e-Manual
168 Self Diagnosis
168 Picture Test
169 Sound Test
169 Motion Control Environment Check
169 Signal Information
169 Reset
170 Updating the Software
170 Update now
170 Manual Update
170 Auto update
171 Usage Mode
171 Support Info
Teletext Feature
Anti-theft Kensington Lock
158 Additional Music Playback Settings
Display Resolution
174 LED 5300 series and above, PDP 5500 series
174 IBM
174 MAC
175 VESA DMT
176 LED 4500 series
176 IBM
176 MAC
176 VESA DMT
Troubleshooting
Screen
Sound
3D TV
Aerial (Air / Cable) Connection
Picture Size and Input Signal
Supported 3D Resolutions
178 HDMI
178 3D Format: L/R, T/B
178 3D Format: Frame Packing
178 Component
178 Digital Channel
179 Videos/Photos
179 Computer via HDMI
Subtitle and Media Contents file formats, and Codec
179 Subtitle
179 External
179 Internal
180 Supported image resolutions
180 Supported music file formats
181 Video Codec
182 Other Restrictions
182 Video Decoders
182 Audio Decoders
Computer Connection
Networking
Miscellaneous
Schedule Recording / Timeshift
Anynet+ (HDMI-CEC)
Photos, Videos & Music
Apps
Web Browser
3D Precautions
183 CAUTION
184 SAFETY PRECAUTIONS
WARRANTY
185 PROCEDURE FOR MAKING A WARRANTY CLAIM
186 WARRANTY CONDITIONS
Licence
Viewing the e-Manual
The embedded e-manual contains information about your TV's key features.
Navigate to the screen menu and select e-Manual (Support > e-Manual).
Select a category from the left side of the screen.
1.
Select an item. The e-Manual will open on the page containing the selected information.
2.
"
Words in blue refer to screen menu options and words in light blue refer to remote control buttons.
"
Arrows are used to indicate the menu path. (Example: Screen Menu > Support > e-Manual)
Scrolling a Page
To scroll a page, use of one of the following methods:
Press the or button on the scroll bar at the right edge of the screen.
●
Place the focus on the or button at the right edge of the screen, press the up or down
●
arrow button on the remote.
For LED 6400 - 7100, PDP 5500 Series
Press the or button on the scroll bar at the right edge of the screen.
●
Drag or flick up or down the line on either the left or right edge of the touchpad.
●
Place the focus on the or button at the right edge of the screen, drag or flick up or down
●
on the touchpad.
Using the Top Icons
Use the Back, Forward, and Opened pages icons on the top left of the screen to navigate through
pages. These icons are available when two or more pages are passed.
Returning to the Home Page
To return to the home page, press the a button or select on the top right of the screen.
Searching the Index
Press the b button or select on the top right of the screen to display the index. Select a term to
display the page containing the term.
Searching Pages
Press the { button or select on the top of the screen to access the search screen. Enter a search
phrase and select Done. Select an item from the search results list to navigate to the relevant page.
Closing the e-Manual
To close the e-Manual, press hold the RETURN button or select at the upper-right corner of the
screen.
Jumping to a Menu Item
To directly jump to the menu item that is described in the current section, select
to jump from a menu item directly to the related section in the e-Manual.
On the screen menu, press the E-MANUAL button that appears on the screen.
For LED 6400 - 7100, PDP 5500 Series
On the screen menu, press the MORE button on the Smart Touch Control and then select e-Manual on
the virtual control panel that appears on the screen.
"
This feature may not be available, depending on the menu.
Try Now
. It is possible
Updating the e-Manual
Open the Smart Hub and navigate to Apps screen, and then select More Apps. The e-manual can be
updated in the same way with an application update.
On the More Apps screen, select Apps to update. Select e-Manual from the list. The e-Manual starts
updating to the latest version. However, Apps to update appears on the screen only when the update
is required.
Aerial Connection
Refer to the diagram and connect the aerial cable to the aerial input connector. Make sure that you do
not bend the cable. The number of connectors and their names and locations may vary depending on
the model.
Connect the correct aerial cable for your viewing environment (over-the-air or cable broadcasting).
However, an aerial connection is not necessary if you are using a cable box or satellite receiver.
Video Device Connections
This TV has a wide range of connectors for video input from video devices such as Blu-ray players,
DVD players, camcorders and gaming consoles. Below is a list of featured connectors shown in
descending order of picture quality.
HDMI
●
Component
●
AV
●
Connect the video device to the TV via an HDMI connector for the best picture quality. If the device
does not have an HDMI connector, try a component connector to get the next best possible picture
quality.
The number of connectors and their names and locations may vary depending on the model. When
connecting an external device, refer to the device's operating manual. The number of external device
connectors and their names and locations may vary depending on the manufacturer.
HDMI Connection
Refer to the diagram and connect the HDMI cable to the video device's HDMI output connector and the
TV's HDMI input connector. One of the following HDMI cable types is recommended:
High-Speed HDMI Cable
●
High-Speed HDMI Cable with Ethernet
●
Use an HDMI cable with a thickness of 14 mm or less. Using a non-certified HDMI cable may result in
a blank screen or a connection error.
"
Some HDMI cables and devices may not be compatible with the TV due to different HDMI specifications.
"
This TV does not support HDMI Ethernet Channel. Ethernet is a LAN (Local Area Network) built on coaxial
cables standardized by the IEEE.
Component Connection
Refer to the diagram and connect the AV cable to the TV's component input connectors and the
device's component output connectors. Make sure the cable colours match the connector colours.
AV Connection
Refer to the diagram and connect the AV cable to the TV's external input connectors and the device's
AV output connectors.
If you are using the TV's external input connectors, connect the video cable to the Y connector. Some
models feature a video connector as well. In this case, connect the cable to the video connector.
Audio Device Connections
This TV has a wide range of connectors for audio input from devices such as amplifiers, Blu-ray
players and DVD players. For better audio quality, it is a good idea to use an AV receiver.
Digital Audio (Optical)
●
Audio
●
ARC (Audio Return Channel)
●
Digital Audio (Optical) Connection
Refer to the diagram and connect the optical cable to the TV's digital audio output connector and the
device's digital audio input connector.
Connecting the device using an optical cable does not automatically turn off the TV speakers. To turn
off the TV speakers, open the Speaker Select (Sound > Speaker Settings > Speaker Select) menu,
then set External Speaker.
Adjust the audio device's volume using its remote control.
An unusual noise coming from the audio device while it is being used may indicate a problem with the
audio device itself. If this is the case, ask for assistance from the audio device manufacturer.
5.1-channel audio for digital channels is only available with broadcasts that support 5.1-channel audio.
Audio Output Connection
Refer to the diagram and connect the audio cable to the TV's audio output connector and the device's
audio input connector. AUDIO OUT is supported in LED TV.
ARC (Audio Return Channel)
This connection is available only with PDP 5500 series and LED 6300 series or higher.
This TV supports 3D and ARC (Audio Return Channel) functions via an HDMI cable. ARC enables
digital sound to be output using just an HDMI cable. However, ARC is only available through the HDMI
(ARC) port and only when the TV is connected to an ARC-enabled AV receiver. Connect the HDMI
cable to the TV's HDMI (ARC) connector and the device's HDMI output connector.
Computer Connection
This SMART TV has the following computer connection ports:
HDMI
●
HDMI-to-DVI
●
For the highest picture quality, connect the computer to the HDMI/DVI port. Not all computers are
HDMI-enabled. In this case, use an HDMI-to-DVI cable to connect the computer to the TV. Refer to the
"Display Resolution" for information on the resolution settings supported to the TV.
HDMI Connection
Refer to the diagram and connect the HDMI cable to the TV's HDMI input port and the computer's
HDMI output port.
HDMI-to-DVI Connection
Refer to the diagram and connect the HDMI-to-DVI cable to the TV's HDMI (DVI) port and the
computer's DVI output port. The HDMI-to-DVI connection is available through the HDMI (DVI) port
only.
DVI cannot carry audio. To listen to the computer sound, connect the external speaker to the
computer’s audio output connector.
Switching Between Video Sources
Press SOURCE button to switch between devices connected to the TV.
For example, to switch to a game console connected to the second HDMI connector, press SOURCE
button. From the Source list, select HDMI2. The connector names may vary depending on the product.
Select Tools button from the Source screen to access the following options:
Information
●
View detailed information about the connected devices.
Edit Name
●
You can rename devices connected to the TV to more easily identify external sources.
With a computer connected to the TV's HDMI (DVI) port via an HDMI cable, for example, you can
change Edit Name to PC.
With a computer connected to the TV's HDMI (DVI) port via an HDMI-to-DVI cable, for example,
you can change Edit Name to DVI PC.
With an AV device connected to the TV's HDMI (DVI) port via an HDMI-to-DVI cable, for
example, you can change Edit Name to DVI Devices.
Refresh
●
Select this if a connected device does not appear in the list. If the list does not show the device
after selecting Refresh, check the status of the TV-to-device connection. Refresh only available
when Anynet+ function is turn On.
Disconnect USB Device
●
Remove the USB device from the list safely. This function is only available when the USB device
selected.
Universal remote setup
●
(Depending on the country)
To add a new external device to control it with the Touch Remote Control, press the SOURCE
button and select Universal remote setup on the top right of the screen. Using the universal
remote control, users can control external devices connected to the TV, such as a set-top box,
Blu-ray player, and AV receiver. For details, see "Universal Remote Setup".
Programming
Scan and index available channels.
You can also remove channels from the index, and designate favourites channels for a more convenient
TV viewing experience. Programming is not necessary if you are connected to a cable or satellite
receiver.
Auto Tuning
Screen Menu > Broadcasting > Auto Tuning
Try Now
Broadcasting
Auto Tuning
Channel List
Guide
Schedule Manager
Edit Channel
Edit Favourites
Channel Settings
"
The displayed image may differ depending on the model.
Automatically scans and indexes all channels received through the TV's aerial input connector.
To start, navigate to Broadcasting and select Auto Tuning.
1.
Select Start when prompted with a message. This initiates the Auto Tuning function. The process
2.
can take up to 30 minutes to complete. If starting the Auto Tuning function when there is an
existing index of channels overwrites the previous index.
Auto Tuning
●
Scans for channels automatically and stores them in the TV’s memory.
Digital & Analogue / Digital / Analogue: Select the channel source to memorise.
–
Channel Settings
Screen Menu > Broadcasting > Channel Settings
Try Now
Broadcasting
Auto Tuning
Channel List
Guide
Schedule Manager
Edit Channel
Edit Favourites
Channel Settings
"
The displayed image may differ depending on the model.
Country (or Area)
Screen Menu > Broadcasting > Channel Settings > Country (or Area)
(Depending on the country)
Select your country (or area) so that the TV can correctly auto-tune the broadcasting channels.
"
The PIN input screen appears. Enter your 4 digit PIN number.
Manual Tuning
Screen Menu > Broadcasting > Channel Settings > Manual Tuning
Scans for a channel manually and stores in the TV.
"
If a channel is locked using the Channel Lock function, the PIN input window appears.
"
This function may not be supported depending on the region.
Try Now
Digital Channel Tuning
●
Scans for a digital channel.
Select the New.
1.
Set the Channel, Frequency, Bandwidth.
2.
"
The Bandwidth function may not be supported depending on the region.
Select the Search. When scanning has finished, a channel is updated in the channel list.
3.
Analogue Channel Tuning
●
Scans for a analogue channel.
Select the New.
1.
Set the Programme, Colour System, Sound System, Channel and Search.
2.
Select the Store. When scanning has finished, a channel is updated in the channel list.
3.
Channel mode
P (programme mode)
●
When tuning is complete, the broadcasting stations in your area have been assigned to position
numbers from P0 to P99. You can select a channel by entering the position number in this mode.
C (aerial channel mode) / S (cable channel mode)
●
These two modes allow you to select a channel by entering the assigned number for each aerial
broadcasting station or cable channel.
Transfer Channel List
Screen Menu > Broadcasting > Channel Settings > Transfer Channel List
Try Now
(Depending on the country)
Imports or exports the channel map.
"
You should connect USB storage to use this function.
"
The PIN input screen appears. Enter the PIN using your remote.
Import from USB: Import channel list from USB.
●
Export to USB: Export channel list to USB. This function is available when USB is connected.
●
Now
Try Now
Try
Channel Management
Screen Menu > Broadcasting > Edit Channel
Try Now Try Now
Broadcasting
Auto Tuning
Channel List
Guide
Schedule Manager
Edit Channel
Edit Favourites
Channel Settings
"
The displayed image may differ depending on the model.
Remove channels from the index, and rename analogue channels. The Edit Channel screen icons
indicate the following:
●
: An analogue channel
●
●
: A favourites channel
: A locked channel
In the Edit Channel screen, select the Virtual Remote panel's or the regular remote's TOOLS button to
access the following options:
Sorting
●
(digital channels only)
Change the list ordered by name or number.
Category
●
The TV's channel index is divided into different categories such as All, TV, Radio, Analogue,
Recently Viewed and Most Viewed. Choose a category.
Edit Favourites
●
Organize favourite lists to find favourite channels and switch between channels more easily. For
details, see "Favourite Channels".
Channel Info
●
Check the information of the channel.
Information
●
Check the information of the broadcast.
Remove Channels
Screen Menu > Broadcasting > Edit Channel
Remove registered channels from the index. Removing channels appearing in the Recently Viewed or
Most Viewed list clears the channels from the list only and does not remove them from the index.
From the screen, select the channels you wish to remove. Unselect channels by choosing them
1.
again.
Press { button. The selected channel(s) will be deleted.
2.
Edit Channel Number
Change the number of the channels in edit channels list.
This function may not be supported depending on the region.
Press a button to bring up the edit channels list and select the channel you wish to change the
1.
number of the channels.
Select the number you wish change. Select DoneE or press touchpad to finish.
2.
Programme Rating Lock
Screen Menu > Broadcasting > Programme Rating Lock
(Depending on the country)
The Programme Rating Lock blocks programmes with ratings higher than those desired. This is useful
for controlling what children watch on TV. This will not function for programmes originating from
external sources, such as DVD players or USB files.
This PIN is required to watch a blocked programme.
The Programme Rating Lock is not available in HDMI or Component mode.
Try Now
Channel Lock
Screen Menu > Broadcasting > Channel Lock
You can lock channels you don't want your children to view. Lock is only available with Channel Lock
set to On. Navigate to the Edit Channel screen, select the channels you wish to lock, press b button,
and then enter the password. This locks the selected channels.
Try Now
Channel Unlock
Unlock locked channels. Navigate to the Edit Channels screen, select the locked channels you wish to
unlock, press b button and then enter the password. This unlocks the selected channels.
Rename Analogue Channels
Select a channel you wish to rename from the Edit Channel screen, press TOOLS button, and then
select Rename channel from the list.
You can now rename the selected channel. The new name can be up to 5 characters long.
Favourite Channels
Screen Menu > Broadcasting > Edit Favourites
Try Now
Broadcasting
Auto Tuning
Channel List
Guide
Schedule Manager
Edit Channel
Edit Favourites
Channel Settings
"
The displayed image may differ depending on the model.
You can designate frequently watched channels as favourites. The channels assigned as a favourite
are displayed with the
symbol on the Edit Channel and channel list screens. You can create up to 5
favourites channel lists. You can also rename and edit favourites channel lists.
From the Edit Favourites screen, select the Virtual Remote panel's or the regular remote's TOOLS
button to access the following options:
Sorting
●
Change the list ordered by name or number. This function is not available on analogue channel.
Edit Channel
●
You can manage the channels saved on the TV.
Information
●
View detailed information about the current programme.
Add Channels
Add a channel to a favourites channels list.
Press a button to bring up the channel list containing the channels you wish to add and then
1.
select the channels.
Press b button to bring up a favourites channels list and then { button to add the selected
2.
channels.
Remove Channels
Remove channels from a favourites channels list.
Press b button to bring up a favourites channels list and then select the channels you wish to
1.
remove.
Press { button to remove the channels from the list.
2.
Rearrange the Favourites Channels List
Rearrange the order of the channels in a Favourites Channels List.
Press b button to bring up the a favourites channels list and select the channel you wish to
1.
move.
Press a button to rearrange the order of the selected channel. Select DoneE or press the
2.
touchpad to finish.
Rename a Favourites Channel List
Rename an existing favourites channels list.
Select the Virtual Remote panel's or the regular remote's TOOLS button to display the list. Select
1.
Rename Favourites from the list.
Rename the list in the popup window. The new name can be up to 20 characters long.
2.
Network Configuration
Connecting the TV to a network gives you access to online services such as the Smart Hub and
AllShare, as well as software updates.
Wired Network
There are three ways to connect the TV to a Local Area Network (LAN).
External Modem
●
① IP Router + ② External Modem
●
Wall-mounted LAN Outlet
●
Dynamic versus Static IP Addresses
If the network requires a dynamic IP address, use an ADSL modem or router that supports the
Dynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCP automatically
provide the IP address, subnet mask, gateway and DNS values the TV needs to access the Internet, so
they do not have to be entered manually. Most home networks use a dynamic IP address.
If the network requires a static IP address, enter the IP address, subnet mask, gateway, and DNS values
manually when setting up the network connection. To get the IP address, subnet mask, gateway and
DNS values, contact your Internet Service Provider (ISP).
If the network requires a static IP address, use an ADSL modem that supports DHCP. ADSL modems
that support DHCP also allow static IP addresses.
Wireless Network
Connect the TV to the Internet using a standard router or modem.
For LED 4500 and 5300 series
Insert the Samsung wireless LAN adapter (WIS09ABGNX, WIS12ABGNX) into one of the TV’s USB
ports, referring to the illustration. Without this connection, the TV cannot connect to the Internet
wireless.
Using the wireless LAN adapter may cause image retention or radio interference on some TV channels.
In those cases, use one of the following methods.
Use a vertical-type wireless LAN adapter.
●
Connect the wireless LAN adapter to a USB extension cable, and insert the cable’s USB plug into
●
one of the TV’s USB ports. Install the wireless LAN adapter on the top of the TV’s back using an
adhesive tape.
Wireless Network Precautions
This TV supports the IEEE 802.11a/b/g/n communication protocols. Samsung recommends using
●
IEEE 802.11n. Otherwise when you play video over a network connection, the video may not play
smoothly.
For LED 4500 and 5300 series
Samsung’s Wireless LAN adapter supports the IEEE 802.11a/b/g and n communication protocols.
Samsung recommends using IEEE 802.11n. When you play video over a network connection, the
video may not play smoothly.
To use a wireless network, the TV must be connected to a wireless router or modem. If the
●
wireless router supports DHCP, the TV can use a DHCP or static IP address to connect to the
wireless network.
Select a channel that is not currently in use for the wireless router. If the channel set for the
●
wireless router is currently being used by another device, the result is usually interference and/or
a communications failure.
Most wireless networks have an optional security system. To enable a wireless network's security
●
system, you need to create a security key using characters and numbers. This security key is then
needed to connect to the wireless network.
Network Security Protocols
The TV only supports the following wireless network security protocols and is unable to connect to
non-certified wireless routers:
Authentication Modes: WEP, WPAPSK, WPA2PSK
●
Encryption Types: WEP, TKIP, AES
●
If the wireless router has been set to Pure High-throughput (Greenfield) 802.11n mode and the
Encryption Type to WEP or TKIP, Samsung SMART TVs will not support the connection in compliance
with the new Wi-Fi certification specifications.
If the wireless router supports WPS (Wi-Fi Protected Setup), it is possible to connect to the network
using PBC (Push Button Configuration) or a PIN (Personal Identification Number). WPS automatically
configures the SSID and WPA key settings.
Loading...