Samsung PS60F5500AK, PS51F5500AK User Manual

Contact SAMSUNG WORLD WIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Country

EIRE 0818 717100 www.samsung.com

U.K 0330 SAMSUNG (7267864) www.samsung.com

Customer Care Centre

Web Site

Plasma TV

user manual

e-Manual

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/register

Model _____________ Serial No. _____________

BN68-04885J-00

Important Safety Instructions

Warning! Important Safety Instructions

(Please read the appropriate section that corresponds to the marking on your Samsung product before attempting to install the product.)

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER (OR BACK). THERE ARE NO USER

SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO

QUALIFIED PERSONNEL.

• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this apparatus, and to protect it from overheating, these slots and openings must never be blocked or covered.

− Do not cover this apparatus in a conﬁned space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided.

− Do not place this apparatus near or over a radiator or heat resistor, or where it is exposed to direct sunlight.

− Do not place a water containing vessel(vases etc.) on this apparatus, as this can result in a risk of ﬁre or electric shock.

• Do not expose this apparatus to rain or place it near water(near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool etc.). If this apparatus accidentally gets wet, unplug it and contact an authorized dealer immediately. Make sure to pull out the power cord from the outlet before cleaning.

• This apparatus use batteries. In your community there might be regulations that require you to dispose of these batteries properly under environmental considerations. Please contact your local authorities for disposal or recycling information.

• Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in ﬁre or electric shock.

• Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular

attention to cords at plug end, adaptors and the point where they exit from the appliance.

• To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.

• Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corresponds to the local electrical supply.

• Never insert anything metallic into the open parts of this apparatus. Doing so many create a danger of electric shock.

• To avoid electric shock, never touch the inside of this apparatus. Only a qualiﬁed technician should open this apparatus.

• Make sure to plug the power cord in until it is ﬁrmly inserted. When removing the power cord, make sure to hold the power plug when pulling the

plug from the outlet. Do not touch the power cord with wet hands.

• If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an authorized dealer or service centre.

• Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time (especially when children, elderly or disabled people will be left alone in the house).

− Accumulated dust can cause an electric shock, an electric leakage or a ﬁre by causing the power cord to generate sparks and heat or the insulation to deteriorate.

• Be sure to contact an authorized service centre, when installing your set in a location with heavy dust, high or low temperatures, high humidity, chemical substances and where it operates for 24 hours such as the aerial port, the train station etc.

• Failure to do so may cause serious damage to your set.

• Use only a properly grounded plug and receptacle.

− An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)

• To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.

• Do not allow children to hang onto the product.

• Store the accessories (battery, etc.) in a location safely out of the reach of children.

• Do not install the product in an unstable location such as a shaky self, a slanted ﬂoor or a location exposed to vibration.

• Do not drop or impart any shock to the product. If the product is damaged, disconnect the power cord and contact a service centre.

• Unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol,

thinners, insecticide, aerial freshener, lubricant or detergent. This may damage the appearance or erase the printing on the product.

• Apparatus shall not be exposed to dripping or splashing.

• Do not dispose of batteries in a ﬁre.

• Do not short circuit, disassemble or overheat the batteries.

• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

• WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.

This symbol alerts you that important literature concerning operation and maintenance has been included with this product.

English - 2

Contents

Basic Features

7 Using the Smart Touch Control

8 Connecting to the TV

8 Inserting the Batteries (AAA X 2)

9 Using the touchpad

10 Show Status and Notiﬁcation Banner

10 Recommendations, History and Searching

10 Adjusting the Touchpad

10 Using the Virtual Remote Control

11 Using the Remote Control

12 Installing batteries (Battery size: AAA)

12 Turning on the TV

13 SETUP

13 Switching Between Video Sources

14 Universal Remote Control Setup

14 Add the External Device

15 Connecting to a COMMON INTERFACE

slot (Your TV viewing Card Slot)

3D Basics

19 3D Active Glasses

19 Pairing 3D Active Glasses

21 Watching 3D Video

22 What is Remote Support?

Troubleshooting and Other Information

23 Troubleshooting

24 Mounting the TV on the Wall Using

the Wall Mount Kit (Optional)

25 Storage and Maintenance

25 Providing Proper Ventilation for Your TV

26 Assembling the Holder-Wire stand

26 Eco Sensor and Screen Brightness

16 Viewing the e-Manual

16 Scrolling a Page

16 Using the Top Icons.

Network Conﬁguration

17 Connecting to a Network

17 Network Connection - Wireless

17 Wireless Network Precautions

18 Network Security Protocols

18 Network Connection - Wired

27 Tip Prevention – Securing the TV to the Wall

Speciﬁcations

28 Speciﬁcations - TV

Guides

29 Licences

30 Warranty Card

31 Wiring the Mains Power

Supply Plug (UK Only)

English - 3

Figures and illustrations in this User Manual are provided for reference only and may differ from the actual product appearance. Product design and speciﬁcations may change without notice.

CIS languages (Russian, Ukrainian, Kazakhs) are not available for this product, since this is manufactured for customers in EU region.

Features for your new TV

• 3D: This new feature enables you to view 3D content.

• SMART HUB:

This TV features Smart Hub, a multi-purpose entertainment and family centre. With Smart Hub, users can surf the web, download applications, and stay in touch with family and friends through social networking services. In addition, you can enjoy photo, video, and music ﬁles stored on external storage devices.

™ Press to launch Smart Hub. Choose a service using the icons displayed in the top part of the screen.

Social: Watch the latest YouTube videos and you and your friends' video posts on Facebook and Twitter. You can also make video calls to friends by connecting the TV to a camera (sold separately).

Apps: Download and install applications such as WebBrowser.

On TV: On TV recommends TV programmes based on their popularity or your personal preferences.

(Depending on the country)

Films and TV Shows: Purchase and watch movies and series without a separate external device. (Depending on the country)

Photos, Videos & Music: Play back photo, video, and music ﬁles from an external storage device.

• Anynet+ (HDMI-CEC): This allows you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote.

• e-Manual: Provides a detailed, on-screen user's manual built into your TV. (page 16)

• SMART Interaction: Using this function, you can access and control menu options and functions using motions. To use Smart Interaction Feature, TV camera (sold separately) should be connected the TV. (Depending on the country)

• Device Manager: Use the TV features with a USB or Bluetooth keyboard and mouse.

• Screen Mirroring: Displays mobile device screens on your TV wirelessly.

WARNINGS: Image retention, commonly known as screen burn-in, can occur on most types of

✎

television if the same image is displayed continuously. The most common causes of image retention are logos that remain stationary on the TV screen. These logos are common on many programmes received via a Set-top Box. To reduce this risk, avoid displaying still images for long durations and lower the brightness or contrast settings to decrease the intensity of the picture. Extended viewing of movies and programs in aspect ratios that are different from the aspect ratio of the TV may cause image retention. Always endeavour to avoid black borders top or bottom by using the zoom function. This will help eliminate the black borders and fit the picture to the entire area of the screen. Using a video game console may cause image retention and is not recommended. When using a PC input, avoid displaying still images for long durations and reduce the brightness or contrast settings to decrease the intensity of the picture.

IMPORTANT: Image retention issues are not covered by your Samsung® warranty.

✎

English - 4

Accessories

Please make sure the following items are included with your TV. If any items are missing, contact your

✎

dealer.

The items’ colours and shapes may vary depending on the models.

✎

Cables not included in the package contents can be purchased separately.

✎

Check that there is no accessory hidden behind packing materials when you open the box.

✎

• Smart Touch Control & Batteries (AAA x 2) • Power Cord

• Remote Control & Batteries (AAA x 2) • Cleaning-Cloth

• User Manual • Samsung 3D Active Glasses (40 inch model and above)

• Regulatory Guide

Holder-Wire stand Ferrite Core (4EA) IR Extension Cable

• An administration fee may be charged if either

− (a) an engineer is called out at your request and there is no defect in the product (i.e. where you have failed to read this user manual)

− (b) you bring the unit to a repair centre and there is no defect in the product (i.e. where you have failed to read this user manual).

• The amount of such administration charge will be advised to you before any work or home visit is carried out.

English - 5

Ferrite Core for Power Cord: The ferrite cores are used to shield the

✎

cables from interference. When connecting a cable, open the ferrite core and clip it around the cable near the plug as shown in the figure.

• Maximum distance between the ferrite core and the end of the cord inserted in the TV: 3/4 inches

Ferrite Core : The ferrite cores are used to shield the cables from

✎

interference. When connecting a cable, open the ferrite core and clip it around the cable near the plug as shown in the figure.

• Use Cat 7 cable for LAN cable.

Power Cord

Warning: Screens can be damaged from direct pressure when handled incorrectly. We recommend lifting the TV by the edges, as shown.

Don't Touch This Screen!

Antenna Cable /

Component Cable

(sold separately)

LAN Cable

(sold

separately)

English - 6

Using the Smart Touch Control

Depending on the model.

✎

You can use the MIC to give Voice Recognition commands. Simply

press the VOICE˜ button.

Voice Recognition function can be affected by unclear

✎

pronunciation, voice level, or surrounding noise.

Turns the TV on and off.

Displays and selects the available

video sources.

MUTE

Turns the TV sound

on/off.

Press and hold this

button to select

Audio Description

and Subtitle.

(Depending on the

country or region.)

Adjusts the volume.

Turn on and off the satellite or cable set-top box connected to the TV. For this, the Smart Touch Control must be conﬁgured as a universal remote control.

VOICE˜

Take your voice command and enter a text using your voice.

Changes channels.

Displays a virtual remote control on the screen. See the e-Manual chapter, Controlling TV > Using

the Virtual Remote Control.

Press and hold the touchpad to select a desired function (e.g. MENU (m), TOOLS (T),

INFO (`), etc.) easily.

The colour buttons work

differently, depending on the

function that the TV is currently

performing.

Press and hold the { button

while watching TV to view

information about the current

programme.

Returns to the previous menu.

Press and hold this button to exit all

currently running applications.

Brings up Smart Hub

applications. See the e-Manual

chapter, SMART TV Features >

Smart Hub.

To exit an application that is

✎

running, press the ™ button.

Touch Pad

• Drag on the Touch Pad to move the focus on the screen.

• Press the Touch Pad to run, activate, or select the highlighted item.

• Press and hold the touch pad to display the Channel List.

Toggles this button between Recommended and Search.

View each digital channel's programming schedule, including showtimes. In addition, sets a Schedule Viewing or Schedule Recording to press the touch pad on the programme entry scheduled to air later.

English - 7

Connecting to the TV

In order to operate the TV using a Smart Touch Control , you must ﬁ rst pair it to the TV via Bluetooth. However, the Smart Touch Control is only available for the paired Samsung TV.

1. When the TV is off, point the Smart Touch Control at the remote control receiver of the TV and press the TV button for the ﬁ rst pairing. Only this buttons sends an IR signal. The remote control receiver's location may vary depending on the model.

2. A Bluetooth icon will appear at the bottom left of the screen as shown below. The TV will then attempt to connect to the Smart Touch Control automatically.

Reconnecting the Smart Touch Control

<The Smart Touch Control pairing button> If you need to reestablish the connection between the TV and the Smart Touch Control, press the pairing button

at the back of the Smart Touch Control toward the Remote receiver of the TV. The pairing button can be accessed by removing the Smart Touch Control's battery cover. Pressing the pairing button automatically reestablishes the connection between the control and the TV.

Battery Low Alarm

If the battery becomes and blanks low while using the Smart Touch Control, the following alarm window blinks and appears at the bottom left of the screen. If the alarm window pops up, replace the batteries of the Smart Touch Control. Use alkaline batteries for longer usage.

Inserting the Batteries (AAA X 2)

1. Slightly lift the battery cover by pulling the strap or using a plastic card. Next, pull on the cover’s notch with a ﬁ ngernail to remove the cover completely.

2. Insert 2 AAA batteries, making sure to align the positive and negative ends correctly.

3. Align the battery cover with the back of the remote control and press down along the edges until it is

cleanly attached to the remote control.

English - 8

Using the touchpad

Use the touchpad to perform various commands. Navigate to Tutorial (Screen Menu > System > Device Manager > Smart Touch Control Settings > Tutorial) to view an on-screen guide to using the Smart

Touch Control.

Dragging Press

Drag on the touchpad in the desired direction.

Move the focus or the pointer in the direction the ﬁnger is dragging.

Press the touchpad. This selects the focused item.

Changing Channels by Entering Numbers

While watching TV, tap on the protruding line on the left or right edge of the touchpad to bring up the numerical input window on the screen. Use your ﬁnger to enter the number for the channel you want to watch. The recognised number is displayed on the screen and the TV switches to the corresponding channel. However, the number you have entered may not be recognised properly by the TV. Refer to the guide below to ensure that your numerical entries are recognised accurately.

Numerical Input Guide

Refer to the diagrams below when entering numerical values. The TV may not recognise your entries if you do not follow the sequences shown below.

English - 9

Show Status and Notiﬁcation Banner

Press the MORE button on the Smart Touch Control and then select STATUS on the virtual control panel to display the status and notiﬁcation banner at the top of the screen.

Recommendations, History and Searching

Recommendations

Press the RECOMM. / SEARCH button and then select Recommended from the list displayed at the bottom of the screen. Select a programme that is currently airing to jump to the corresponding channel or a programme that is scheduled to air to set up a Schedule Viewing or Schedule Recording setting. Refer to the "Scheduled Recommended Programme Info" for more information.

Select an application to launch. Samsung Apps will launch if the selected application is not installed on the TV. Refer to the "Samsung Apps" for more information.

History

Press the RECOMM. / SEARCH button and then select History from the list displayed at the bottom of the screen. This displays an interactive list of recently accessed channels, media content and applications.

Searching

Press the RECOMM. / SEARCH button twice. Enter search criteria to search not only many apps and their contents on the TV but also the Web.

Adjusting the Touchpad

Screen Menu > System > Device Manager > Smart Touch Control Settings > Touch Sensitivity Users can adjust the sensitivity of the Smart Touch Control’s touchpad. Set Touch Sensitivity to adjust

sensitivity and make it more convenient to use.

Using the Virtual Remote Control

Press MORE button to display the virtual remote panel on the screen. The virtual remote panel consists of a number panel, a playback control panel, and a quick access panel. Use the Touch Pad to select numbers and buttons. Press and hold the MORE button. A quick access panel of virtual remote panel appears. You can select screen buttons easily.

Changing the Virtual Remote Control Panel

Choose the number panel, playback control panel, or quick access panel as the panel to be shown on the screen. Use the touchpad to keep moving the focus left or right. The panel changes when the focus is moved beyond the leftmost or rightmost edge. Use left/right scroll function on the touchpad to change the panel easily.

Using the Number Panel

Use the number panel to enter numbers on a keypad screen or webpage or to change the channel while watching TV. Changing the channel using the number pad leaves a record, allowing you to easily return to previous channels.

Using the Playback Control Panel

Use the playback control panel to pause, rewind, fast forward, skip to the next ﬁle, and much more while enjoying media content.

Using the Quick Access Panel

Quickly access the INFO, MENU and e-Manual buttons. on the operating mode of the Smart Touch Control (with the TV only, as a universal remote, etc.).

However, the availability of buttons vary depending

English - 10

+ 21 hidden pages