Samsung PS59D6900DQ, PS51D6900DQ User Manual

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Country	Customer Care Centre	Web Site
AUSTRIA	0810 - SAMSUNG (7267864, € 0.07/min)	www.samsung.com/at
BELGIUM	02-201-24-18	www.samsung.com/be (Dutch)
		www.samsung.com/be_fr (French)
CZECH	800 - SAMSUNG (800-726786)	www.samsung.com/cz
	Samsung Zrt., česká organizační složka, Oasis Florenc, Sokolovská394/17, 180 00, Praha 8
DENMARK	70 70 19 70	www.samsung.com/dk
FINLAND	030 - 6227 515	www.samsung.com/fi
FRANCE	01 48 63 00 00	www.samsung.com/fr
GERMANY	01805 - SAMSUNG (726-7864 € 0,14/Min)	www.samsung.de
HUNGARY	06-80-SAMSUNG (726-7864)	www.samsung.com/hu
ITALIA	800-SAMSUNG (726-7864)	www.samsung.com/it
LUXEMBURG	261 03 710	www.samsung.com/lu
NETHERLANDS	0900-SAMSUNG (0900-7267864) (€ 0,10/Min)	www.samsung.com/nl
NORWAY	815-56 480	www.samsung.com/no
POLAND	0 801 1SAMSUNG (172678)	www.samsung.com/pl
	022-607-93-33
PORTUGAL	80820-SAMSUNG (726-7864)	www.samsung.com/pt
SLOVAKIA	0800-SAMSUNG (726-7864)	www.samsung.com/sk
SPAIN	902 - 1 - SAMSUNG (902 172 678)	www.samsung.com/es
SWEDEN	0771 726 7864 (SAMSUNG)	www.samsung.com/se
TURKEY	444 77 11	www.samsung.com/tr
U.K	0845 SAMSUNG (7267864)	www.samsung.com/uk
EIRE	0818 717100	www.samsung.com/ie
SWITZERLAND	0848 - SAMSUNG (7267864, CHF 0.08/min)	www.samsung.com/ch
		www.samsung.com/ch_fr/(French)
LITHUANIA	8-800-77777	www.samsung.com/lt
LATVIA	8000-7267	www.samsung.com/lv
ESTONIA	800-7267	www.samsung.com/ee

Plasma TV

user manual

imagine the possibilities

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/register

Model _____________ Serial No. _____________

© 2011 Samsung Electronics Co., Ltd. All rights reserved.	BN68-03421D-01

For more information on how to use e-Manual (p. 14)

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice.

Digital TV notice

1.Functionalities related to Digital TV (DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC) digital terrestrial signals are broadcasted or where you are able to access to a compatible DVB-C (MPEG2 and MPEG4 AAC) cable-TV service. Please check with your local dealer the possibility to receive DVB-T or DVB-C signal.

2.DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB-C is that for the broadcast transmission of digital TV over cable. However, some differentiated features like EPG (Electric Programme Guide), VOD (Video On Demand) and so on, are not included in this specification. So, they cannot be workable at this moment.

3.Although this TV set meets the latest DVB-T and DVB-C standards, as of [August, 2008], the compatibility with future DVB-T digital terrestrial and DVB-C digital cable broadcasts cannot be guaranteed.

4.Depending on the countries/areas where this TV set is used some cable-TV providers may charge an additional fee for such a service and you may be required to agree to terms and conditions of their business.

5.Some Digital TV functions might be unavailable in some countries or regions and DVB-C might not work correctly with some cable service providers.

6.For more information, please contact your local Samsung customer care centre.

The reception quality of TV may be affected due to differences in broadcasting method between the countries. Please check the TV performance in the local SAMSUNG Authorized Dealer, or the Samsung Call Centre whether it can be improved by reconfiguring TV setting or not.

User Instructions

•Screen Image retention

Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.

•Heat on the top of the Plasma TV

The top side of the product may be hot after long periods of use as heat dissipates from the panel through the vent hole in the upper part of the product.

This is normal and does not indicate any defect or operation failure of the product. However, children should be prevented from touching the upper part of the product.

•The product is making a “cracking” noise.

A “cracking” noise may occur when the product contracts or expands due to a change in the surrounding environment such as temperature or humidity. This is normal and not a defect of the unit.

•Cell Defects

The PDP uses a panel consisting of 2,360,000(HD-level) to 6,221,000(FHD-level) pixels which require sophisticated technology to produce. However, there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.

•Avoid operating the TV at temperatures below 41°F (5°C)

•A still image displayed too long may cause permanent damage to the PDP Panel.

Watching the Plasma TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and centre of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause similar effects to the screen.

Damages caused by the above effect are not covered by the Warranty.

•After-images on the Screen.

Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the “brightness” and “contrast” when displaying still images for a long time.

•Warranty

Warranty does not cover any damage caused by image retention. Burn-in is not covered by the warranty.

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems)

This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

Correct disposal of batteries in this product

(Applicable in the European Union and other European countries with separate battery return systems)

This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment. To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.

English - 2

Accessories

Please make sure the following items are included with your TV. If any items are missing, contact your dealer.

The items’ colours and shapes may vary depending on the models.Cables not included in the package contents can be purchased separately.

Check that there is no accessory hidden behind packing materials when you open the box.

[[CAUTION: INSERT SECURELY LEST SHOULD BE DETACHED IN SET

••	Remote Control & Batteries (AAA x 2)	••	Cleaning-Cloth
••	Owner’s Instructions	••	Warranty Card (Not available in some locations) /
			Safety Guide

Scart Adapter

AV / Component Adapter

CI Card Adapter

Ferrite Core (2EA)

Ferrite Core (1EA)

Ferrite Core for Power Cord: The ferrite cores are used to shield the cables from interference. When connecting a cable, open the ferrite core and clip it around the cable near the plug as shown in the figure.

xx A Maximum distance between the ferrite core and the end of the cord inserted the TV: 6~8 inches

xx B Maximum distance between the ferrite core and the other end of the cord inserted in the AC outlet: 3/4 inch

Ferrite Core : The ferrite cores are used to shield the cables from interference. When connecting a cable, open the ferrite core and clip it around the cable near the plug as shown in the figure.

•• An administration fee may be charged if either

A B

Power Cord

Antenna Cable/

Component Cable

(sold separately)

––(a) an engineer is called out at your request and there is no defect in the product (i.e. where you have failed to read this user manual)

––(b) you bring the unit to a repair centre and there is no defect in the product (i.e. where you have failed to read this user manual).

•• The amount of such administration charge will be advised to you before any work or home visit is carried out.

English - 3

Viewing the Control Panel

The product colour and shape may vary depending on the model.

Control Panel

Remote control sensor	Aim the remote control towards this spot on the TV.
Power Indicator	Blinks and turns off when the power is on and lights up in standby mode.
SOURCEE	Toggles between all the available input sources. In the on-screen menu, use
	this button as you would use the ENTEREbutton on the remote control.
MENU	Displays an on-screen menu, the OSD (on screen display) of your TV’s
	features.
Y	Adjusts the volume. In the OSD, use the Ybuttons as you would use
	the ◄ and ► buttons on the remote control.
z	Changes the channels. In the OSD, use the zbuttons as you
	would use the ▼ and ▲ buttons on the remote control.
P(Power)	Turns the TV on or off.

Standby mode

Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.

Securing the Installation Space

Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.

Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.

When using a stand or wall-mount, use parts provided by Samsung Electronics only.

xx If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.

The appearance may differ depending on the product.

Be careful when you contact the TV because some parts can be somewhat hot.

Installation with a stand.

Installation with a wall-mount.

10 cm

10 cm

10 cm

	10 cm
10 cm	10 cm
	10 cm

English - 4

Viewing the Remote Control

This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel and Volume buttons.

Turns the TV on and off.

Displays and selects the available video sources.

Have direct access to channels.

Alternately select Teletext ON, Double, Mix or OFF.

Adjusts the volume.

Opens the OSD.

Link to various application services.

Quickly select frequently used functions.

Returns to the previous menu.

These buttons are for the Channel and SMART HUB menu and interactive TV(MHEG) (UK only) features, etc.

Use these buttons in media contents and

Anynet+ modes.

POWER

SOURCE

,.;@ abc

ghi jkl

pqrs tuv

TEXT

TTX/MIX

MUTE

CH LIST

HUB MENU

SMART

TOOLS

ON/OFF

Turns the remote control light on or off. When on, the buttons become illuminated for a moment when pressed. (Using the

def remote control with this button set to On will reduce the battery usage time.)

mno

wxyz

PRE-CH Returns to the previous channel. Cuts off the sound temporarily.

Changes channels.

Displays channel lists on the screen.

GUIDE Displays the EPG (Electronic Programme

Guide).

INFO

Displays information on the TV screen.

RETURN EXIT

A B C D

TV

SOCIAL SEARCH

E-MANUAL D AD/SUBT.

u/d/l/r: Move the cursor on-screen menu item.

ENTERE: Selects the menu and changes the corresponding item value.

Exits the menu.

SOCIAL TV: Displays the Social TV screen.

SEARCH: Support to recommendation search word and search function.

W: Sets the video, which provided with 3D signal.

E-MANUAL: Displays the e-Manual.

D: Use this button when using data broadcast service.

AD/SUBT.: Turns the audio description on and off (not available in some locations). / Displays digital subtitles.

Press the TOOLS button to use the DUAL I-II (sound effect selection).

Installing batteries (Battery size: AAA)

English - 5

Changing the Input Source

Source

Use to select TV or an external input	SOURCE
sources such as a DVD / Blu-ray player /
cable box / STB satellite receiver.

■■ TV / Ext. / PC / HDMI1/DVI / HDMI2 / HDMI3 / HDMI4 / AV / Component / USB / AllShare

In the Source, connected inputs will be highlighted.

Ext. and PC always stay activated.

Edit Name

In the Source, press the TOOLS button, and then you can set an external input sources name you want.

■■ VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name the device connected to the input jacks to make your input source selection easier.

When connecting a PC to the HDMI IN 1(DVI) port with HDMI cable, you should set the TV to

PC mode under Edit Name.

When connecting a PC to the HDMI IN 1(DVI) port with HDMI to DVI cable, you should set the TV to DVI PC mode under Edit Name.

When connecting an AV devices to the HDMI IN 1(DVI) port with HDMI to DVI cable, you should set the TV to DVI Devices mode under Edit Name.

Edit Favourites

In the Source, press the TOOLS button to select Edit Favourites. You can set an external input source to Favourites.

Information

You can see detailed information about the selected external device.

Refresh

In the Source, If the external devices is not displayed, press the TOOLS button to select Refresh. Searching for connected devices.

For best cable connection to this product, be sure to use cables with a maximum thickness as below:

•• Maximum thickness - 0.55 inches (14mm)

Connecting to an Antenna

When the TV is initially powered on, basic settings proceed automatically.Preset: Connecting the mains and antenna.

The PDP device may interfere with an amateur radio or AM radio.

When using two-way radio mobile and portable units or amateur radio or AM radio near by your TV, this may cause the TV to malfunction.

Cable

Satellite VHF/UHF Antenna

ANT 2 IN	ANT 1 IN
(SATELLITE)

or

English - 6

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the POWERPbutton. Plug & Play is available only when the Source is set to TV.

Before turning on the TV, make sure the antenna cable is connected (p. 6).

1	Selecting a language
2	Setting the Network
3	Software upgrade

4	Selecting Store
	Demo or Home Use

5 Selecting a country

6	ModeSetting the Clock
7	Selecting an antenna
8	Selecting a channel

9 Complete

	Press the ▲ or ▼ button, then press the ENTEREbutton.	POWER
		P
	Select the desired OSD (On Screen Display) language.
	Set up your network connection. Press the ENTEREbutton
	to start. If you want to setting to it later, select Skip. For more
	information, refer to “Wired / Wireless Network Connection” in the
	e-Manual.

When network connection settings are complete, Software Upgrade is available. Select Next to upgrade TV software. Your TV will automatically upgrade, if your TV need a software upgrade. If you want to upgrade later, select the Skip. For more information, refer to “Software Upgrade” (Preference Features → Support Menu) in the e-Manual.

This may take some time, depending on network status. Press the ◄ or ► button, then press the ENTEREbutton.

Select the Home Use mode. Store Demo mode is for retail environments.

To return the unit’s settings from Store Demo to Home Use (standard): Press the volume button on the TV. When you see the volume OSD, press and hold MENU for 5 sec.

Store Demo is only for shop display. If you select it, several functions are not able to use. Please select Home Use when you watch at home.

Press the ▲ or ▼ button, then press the ENTEREbutton. Select the appropriate country.

After selecting the country in the Country menu, some models may proceed with an additional option to setup the pin number.

When you input the PIN number, “0-0-0-0” is not available. Set the Clock Mode automatically or manually.

Press the ▲ or ▼ button, then press the ENTEREbutton. Select the Antenna source. The option may differ depending on country.

Press the ▲ or ▼ button, then press the ENTEREbutton. Select the channel source to memorise. When setting the antenna source to Cable, a step appears allowing you to assign numerical values (channel frequencies) to the channels.

For more information, refer to Channel → Memorising Channels in the e-Manual.

When Air or Cable is selected first: After all Air or Cable channels are stored, the step for storing Satellite channels is displayed.

When Satellite is selected first: After all Satellite channels are stored, the step for storing Air or Cable channels is displayed.

Press the ENTEREbutton at any time to interrupt the memorisation process.

Press the ENTEREbutton.

If You Want to Reset This Feature...

Select System - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0”. If you want to change the PIN number, use the Change PIN function.

You should do Plug & Play (MENU → System) again at home although you did in shop.

If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to “0-0-0-0”: MUTE → 8 → 2 → 4 → POWER (on).

English - 7

Connecting to an AV devices

¦¦Availablereceiver, VCRdevices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite

HDMI connection

HDMI OUT

HDMI to DVI connection

DVI OUT

AUDIO OUT

R-AUDIO-L

Using an HDMI or an HDMI to DVI cable (up to 1080p)

HDMI IN 1(DVI), 2, 3, 4 / PC/DVI AUDIO IN

xx For better picture and audio quality, connect to a digital device using an HDMI cable.

xx An HDMI cable supports digital video and audio signals, and does not require an audio cable.

––To connect the TV to a digital device that does not support HDMI output, use an HDMI/DVI and audio cables.

xx The picture may not display normally (if at all) or the audio may not work if an external device that uses an older version of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer of the external device about the HDMI version and, if out of date, request an upgrade.

xx Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may occur.

xx A basic high-speed HDMI cable or one with ethernet is recommended. This product does not support the ethernet function via HDMI.

English - 8

Component connection

EXT (RGB)	ANT 2 IN
	(SATELLITE)

AUDIO OUT

R	R
W	W

R

R

R-AUDIO-L

COMPONENT OUT

B

B

G

G

PR PB Y

AV connection

R	R
W	W

Y

Y

AUDIO OUT

R-AUDIO-L

VIDEO OUT

SCART connection

EXT

Using a Component (up to 1080p) or an Audio/Video (480i only) and a Scart Cable

In Ext. mode, DTV Out supports MPEG SD Video and Audio only.

When connecting to AV IN, the colour of the AV IN [VIDEO] jack (green) will not match the video cable (yellow).

To obtain the best picture quality, the Component connection is recommended over the A/V connection.

English - 9

Connecting to a PC and Audio device

¦¦ Available devices: digital audio system, amplifier, DVD home theatre

DVD home theatre connection

OPTICAL

Headphones connection

Using an Optical (Digital) or a Headphone Connection

DIGITAL AUDIO OUT (OPTICAL)

xx When a digital audio system is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume of both the TV and the system.

xx 5.1 CH (chnnel) audio is available when the TV is connected to an external device supporting 5.1 CH.

xx When the receiver (home theatre) is set to on, you can hear sound output from the TV’s optical jack. When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theatre receiver. When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top- Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the home theatre receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theatre.

Headphones H: You can connect your headphones to the headphones output on your set. While the headphones are connected, the sound from the built-in speakers will be disabled.

xx Sound function may be restricted when connecting headphones to the TV. xx Headphone volume and TV volume are adjusted separately.

English - 10

¦¦ Using an HDMI cable or an HDMI to DVI cable or a D-sub cable

Connecting through the HDMI cable may not be supported depending on the PC.

PC connection

HDMI OUT

DVI OUT

AUDIO OUT

AUDIO OUT

PC OUT

Display Modes (D-Sub and an HDMI to DVI Input)

Optimal resolution is 1920 X 1080 @ 60 Hz.

	Mode	Resolution	Horizontal Frequency (KHz)	Vertical Frequency (Hz)	Pixel Clock Frequency (MHz)	Sync Polarity (H / V)
	IBM	640 x 350	31.469	70.086	25.175	+/-
		720 x 400	31.469	70.087	28.322	-/+
		640 x 480	35.000	66.667	30.240	-/-
	MAC	832 x 624	49.726	74.551	57.284	-/-
		1152 x 870	68.681	75.062	100.000	-/-
		640 x 480	31.469	59.940	25.175	-/-
		640 x 480	37.861	72.809	31.500	-/-
		640 x 480	37.500	75.000	31.500	-/-
		800 x 600	37.879	60.317	40.000	+/+
		800 x 600	48.077	72.188	50.000	+/+
		800 x 600	46.875	75.000	49.500	+/+
		1024 x 768	48.363	60.004	65.000	-/-
		1024 x 768	56.476	70.069	75.000	-/-
		1024 x 768	60.023	75.029	78.750	+/+
	VESA DMT	1152 x 864	67.500	75.000	108.000	+/+
		1280 x 1024	63.981	60.020	108.000	+/+
		1280 x 1024	79.976	75.025	135.000	+/+
		1280 x 800	49.702	59.810	83.500	-/+
		1280 x 800	62.795	74.934	106.500	-/+
		1280 x 960	60.000	60.000	108.000	+/+
		1360 x 768	47.712	60.015	85.500	+/+
		1440 x 900	55.935	59.887	106.500	-/+
		1440 x 900	70.635	74.984	136.750	-/+
		1680 x 1050	65.290	59.954	146.250	-/+
	VESA DMT /	1920 x 1080p	67.500	60.000	148.500	+/+
	DTV CEA

NOTE

xx For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack. xx The interlace mode is not supported.

xx The set might operate abnormally if a non-standard video format is selected.

xx Separate and Composite modes are supported. SOG(Sync On Green) is not supported.

English - 11

Connecting to a COMMON INTERFACE slot

Attaching the CI Card Adapter

Attach the adapter as shown below.

To connect the CI CARD Adapter, follow these steps.

We recommend attaching the adapter before installing the wall mount, or inserting the “CI or CI+ CARD”.

1. Insert the CI CARD Adapter into the two holes on the	TV Rear
product 1.

Please find a two holes on the rear of the TV. A two holes is beside the COMMON INTERFACE port.

2.Connect the CI CARD Adapter into the COMMON INTERFACE port on the product 2.

3.Insert the “CI or CI+ CARD”.

We recommand that you insert the CI card before you mount the TV on a wall. It may be difficult to insert after the mounting.

Insert the card after attaching the CI-Module on TV. It is difficult to attach the module if you insert the card before attaching.

Using the “CI or CI+ CARD”

To watch paid channels, the “CI or CI+ CARD” must be inserted.

•• If you don’t insert the “CI or CI+ CARD”, some channels will display the message “Scrambled Signal”.

•• The pairing information containing a telephone number, the “CI or CI+ CARD” ID the Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider.

•• When the configuration of channel information has finished, the message “Updating Completed” is displayed, indicating the channel list is updated.

NOTE

xx You must obtain a “CI or CI+ CARD” from a local cable service provider.

xx When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may cause damage to it.

xx Insert the “CI or CI+ CARD” in the direction marked on the card.

xx The location of the COMMON INTERFACE slot may be different depending on the model.

xx “CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer. xx If you have any problems, please contact a service provider.

xx Insert the “CI or CI+ CARD” that supports the current antenna settings. The screen will be distorted or will not be seen.

English - 12

Network Connection

You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or wireless connection.

Network Connection - Wireless

You can connect your TV to your LAN through a standard wireless router or modem.

	Wireless IP sharer
The LAN Port on	(route having DHCP server)	TV
the Wall

LAN Cable

Samsung’s Wireless LAN adapter supports the IEEE 802.11a/b/g and n communication protocols. Samsung recommends using IEEE 802.11n. When you play the video over a IEEE 802.11b/g connection, the video may not play smoothly.

Most wireless network systems incorporate a security system that requires devices that access the network through an access point or wireless router (typically a wireless IP Sharer) to transmit an encrypted security code called an access key.

If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or TKIP AES (WPS2Mixed) for your wireless router, Samsung TVs will not support a connection in compliance with new Wi-Fi certification specifications.

Network Connection - Wired

There are two main ways to connect your TV to your network using cable, depending on your network setup. They are illustrated below:

The Modem Port on the Wall	External Modem	TV Rear Panel
	(ADSL / VDSL / Cable TV)
	Modem Cable	LAN Cable

The LAN Port on the Wall	TV Rear Panel
	LAN Cable

It is not supported when the network speed is under 10 Mbps.

English - 13

How to view the e-Manual

	E-MANUAL	You can read the introduction and instructions about the TV features stored
		in your TV.

O MENUm→ Support → e-Manual → ENTERE

If you want to return to e-Manual, press E-MANUAL button on remote.

You can’t use the Try Now function, if the menu is not activated.

Screen Display

TV Screen: Displays the current input source screen.

Help: Displays the e-Manual Guide or Product guide. Press ENTERE

button.

Change the category. Press lor r button to select category you want.

Displays the sub-menu list. Press ENTEREbutton to select submenu you want.

Index: Displays index screen.

X: Exit the e-Manual.

Using the Help

Display the e-Manual Guide & the Product Guide by pressing Help.

How to view the e-Manual

You can read the introduction and instructions about
the TV features stored in your TV.	Basic Features
O MENUm→ Support → e-Manual → ENTERE	Adjusting Picture Settings
	Changing the Preset Picture Mode
	Changing the Picture Size
	Changing the Picture Options
	Setting up the TV with Your PC
Help	Index

Sync media from multiple devices with AllShare

AllShare™ syncs your digital devices so you can enjoy music, movies and photos from your PC, camera and mobile devices, on your larger TV screen. Connects you to multiple PCs, as well.

Return

Return

<E-manual Guide>

The e-Manual guide appears as above.

<Product Guide>

The product guide appears as above.

How to toggle between the e-Manual and the corresponding menu(s).

Basic Features > Changing the Preset Picture Mode (5/10)

Changing the Preset Picture Mode

■Picture Mode t

Select your preferred picture type.

NWhen an input source is set to PC, the Picture Mode is only available the

Standard and Entertain.

• Dynamic: Suitable for a bright room.

•	Standard: Suitable for a normal environment.
•	Natural for LED TV / Relax for PDP TV : Suitable for reducing eye strain.

•Movie: Suitable for watching movies in a dark room.

•Entertain: Suitable for watching movies and games.

Help

Try Now

Home

Zoom

Index

This function is not enabled in some menus.

Try Now

E-MANUAL

Picture
Picture Mode		Standard
Cell light		14
Contrast		100
Brightness		45
Sharpness		50
Colour		50
Tint (G/R)	G 50	R 50

English - 14

Method 1

1.Select Try Now, if you want to execute the corresponding menu(s).

2.To return to the e-Manual screen, press the

E-MANUAL button.

Viewing the Contents

Basic Features > Changing the Preset Picture Mode (5/10)

Changing the Preset Picture Mode

OO MENUm→ Picture → Picture Mode → ENTERE

■■ Picture Mode t

Select your preferred picture type.

NN When an input source is set to PC, the Picture Mode is only available the Standard and Entertain.

•Dynamic: Suitable for a bright room.

•Standard: Suitable for a normal environment.

• Natural for LED TV / Relax for PDP TV : Suitable for reducing eye strain.

•Movie: Suitable for watching movies in a dark room.

•Entertain: Suitable for watching movies and games.

Help

Try Now

Home

Zoom

Index

Try Now: Displays the corresponding menu(s).

Home: Moves to the e-Manual home screen.

Zoom: Magnifies a screen.

Index: Displays index screen.

Method 2

1.Press the ENTEREbutton when selecting Contents Area. The “Are you sure?” is displayed. Select Yes and then press the ENTEREbutton. The OSD window will be displayed.

2.To return to the e-Manual screen, press the

E-MANUAL button.

Contents Area: You can view the corresponding contents, if you selected a sub-menu. To move previous or next page, press the lor rbutton.

Viewing the Contents

When you view the e-Manual instruction, select the Zoom to magnify the screen. You can scroll through the magnified screen by using the uor dbuttons.

To return to the previous screen, press the RETURN button.

Changing the Preset Picture Mode

OO MENUm→ Picture → Picture Mode → ENTERE

■■Picture Mode t

Select your preferred picture type.

NN When an input source is set to PC, the Picture Mode is only available the Standard and Entertain.

•Dynamic: Suitable for a bright room.

•Standard: Suitable for a normal environment.

• Natural for LED TV / Relax for PDP TV : Suitable for reducing eye strain.

•Movie: Suitable for watching movies in a dark room.

•Entertain: Suitable for watching movies and games.

Return

How to search a keyword by using index page

This function may not supported depending on the language.

1.If you want to search a keyword, press the u/ d/ l/ rbutton to select Index.

2.Press the lor rbutton to select a character order you want, and then press the ENTEREbutton.

3.Press the uor dbutton to select a keyword you want to see, and then press the ENTEREbutton.

4.You can view the corresponding e-Manual instruction screen.To close the Index screen, press the RETURN button.

English - 15

Installing the Wall Mount

Installing the Wall Mount Kit

The wall mount kit (sold separately) allows you to mount the TV on the wall.

For detailed information on installing the wall mount, see the instructions provided with the wall mount. Contact a technician for assistance when installing the wall mount bracket.

Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own.

Wall Mount Kit Specifications (VESA)

The wall mount kit is not supplied, but sold separately.

Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.

NOTE

xx Standard dimensions for wall mount kits are shown in the table below.

xx When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.

xx Do not use screws that do not comply with the VESA standard screw specifications.

xx Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw specifications. Screws that are too long may cause damage to the inside of the TV set.

xx For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ depending on the wall mount specifications.

xx Do not fasten the screws that are too strongly; this may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents.

xx Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions.

xx Our 55” model do not comply with VESA Specifications. Therefore, you should use our dedicated wall mount kit for this model.

xx Do not mount the TV at more than a 15 degree tilt.

	Product Family	inches	VESA Spec. (A * B)	Standard Screw	Quantity
	PDP-TV	51	400 X 400	M8	4
	[Ultra-Slim]	59 ~ 64	600 X 400

Unscrew the hole around before installing Wall-Mount on the wall.

Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.

English - 16

Troubleshooting

If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply, please visit “www.samsung.com,” then click on Support, or contact the call centre listed on the back-cover of this manual.

Issues	Solutions and Explanations
The TV won’t turn on.	• Make sure the AC power cord is securely plugged in to the wall outlet and the TV.
	• Make sure the wall outlet is working.
	• Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns
	on, refer to “Remote control does not work” below.
There is no picture/video.	• Check cable connections (remove and reconnect all cables connected to the TV and external
	devices).
	• Set your external device’s (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections
	to the TV input. For example, if an external device’s output is HDMI, it should be connected to an
	HDMI input on the TV.
	• Make sure your connected devices are powered on.
	• Be sure to select the TV’s correct source by pressing the SOURCE button on the remote control.
The remote control does not work.	• Replace the remote control batteries with the poles (+/–) in the right direction.
	• Clean the sensor’s transmission window on the remote.
	• Try pointing the remote directly at the TV from 5~6 feet away.
The cable/set top box remote control	• Programme the Cable/Set remote control to operate the TV. Refer to the Cable/Set user manual for
doesn’t turn the TV on or off, or adjust the	the SAMSUNG TV code.
volume.

Some of above pictures and functions are available at specific models only.

You can keep your TV as optimum condition to upgrade the latest firmware on web site (samsung.com → Support → Downloads) by USB.

Licence

List of Features

Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed without a cable box / STB (Set-Top-Box) satellite receiver.

3D

This exciting new feature enables you to view 3D content.

SMART HUB

The Gateway to all content integrated in one place

•• It’s all integrated to guide you to easier and diverse entertainment choices.

•• Control your entertainment life with easy and simple user friendly UI.

•• Access to diverse Apps that are adding up every day.

•• Customize your TV, by App grouping & sorting to your taste.

AllShare™

AllShare™ connects your TV and compatible Samsung mobile phones/devices through a network.

Anynet+(HDMI-CEC)

Allows you to control all connected Samsung devices that support anynet+ with your Samsung TV’s remote.

English - 17

Securing the TV to the wall

Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious injuries or death. Follow all safety precautions provided in the included Safety Flyer. For added stability and safety, install the anti-fall device as follows.

To Avoid the TV from Falling

1.Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the screws have been firmly installed onto the wall.

You may need additional material such as an anchor depending on the type of wall.

Since the necessary clamps, screws, and string are not supplied, please purchase these additionally.

2. Remove the screws from the back centre of the TV, put the screws into the clamps, and then fasten the screws onto the TV again.

Screws may not be supplied with the product. In this case, please purchase the screws of the following specifications.

3. Connect the clamps fixed onto the TV and the clamps fixed onto the wall
with a strong cable and then tie the string tightly.	Wall
NOTE

xx Install the TV near to the wall so that it does not fall backwards.

xx It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the TV.

xx Untie the string before moving the TV.

4.Verify all connections are properly secured. Periodically check connections for any sign of fatigue for failure. If you have any doubt about the security of your connections, contact a professional installer.

Storage and Maintenance

If you attached some stickers on the TV screen, it remains some debris after removing the sticker. Please clean it to watch TV.

Do not spray water or a cleaning agent directly onto the product. Any liquid that goes into the product may cause a failure, fire, or electric shock.

Clean the product with a soft cloth dapped in a small amount of water.

English - 18

	Specifications
Display Resolution	1920 x 1080
Environmental Considerations
Operating Temperature	10°C to 40°C (50°F to 104°F)
Operating Humidity	10% to 80%, non-condensing
Storage Temperature	-20°C to 45°C (-4°F to 113°F)
Storage Humidity	5% to 95%, non-condensing
TV System	Analogue: B/G, D/K, L, I (Depending on your country selection)
	Digital: DVB-T/DVB-C/DVB-S2
Colour/Video System	Analogue: PAL, SECAM, NTSC-4.43, NTSC-3.58, PAL60
	Digital: MPEG-2 MP@ML, MPEG-4, H.264/AVC MP@L3, MP@L4.0, HP@L4.0
Sound System	BG, DK, L, NICAM, MPEG1, DD, DD+, HEAAC.
HDMI IN	Video: 1080 24p, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
	Audio: 2Ch Linear PCM 32/44.1/48kHz, 16/20/24bits.
Stand Swivel (Left / Right)	-20˚ ~ 20˚
Model Name	PS51D6900		PS59D6900
	PS51D6910		PS59D6910
Screen Size	51 inches		59 inches
Sound
(Output)	10 W X 2		15 W X 2
Dimensions (WxDxH)
Body	1195.9 X 38.0 X 719.4 mm		1378.4 X 38.0 X 827.3 mm
With stand	1195.9 X 305.0 X 783.1 mm		1378.4 X 335.0 X 886.3 mm
Weight
Without Stand	22.4 kg		30.6 kg
With Stand	27.1 kg		36.3 kg

Design and specifications are subject to change without prior notice.

For information about power supply, and more about power consumption, refer to the label attached to the product.

Hereby, Samsung, declares that this PDP TV is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

English - 19

ELECTRONICS

Declaration of Conformity

For the following

Product : PDP TV

Model(s) : PS51D6900 PS59D6900 PS51D6910 PS59D6910

Year of Affixing CE Marking : 2011

Manufactured at:

F1: Samsung Electronics Co., Ltd.

416, Maetan 3-Dong, Yeongtong-Gu, Suwon-Si, Gyeonggi-Do, 443-742 Korea F2: Samsung Electronics Slovakia s.r.o

Hviezdoslavova 807 924 27 Galanta, Slovak Republic F3: Samsung Electronics Hungarian Co., Ltd.

H-5126 Jaszfenyszaru, Samsung ter 1

(Factories name and address)

We hereby declare under our sole responsibility that the electrical product above is in compliance with the essential requirements of R&TTE Directive (1995/5/EC), the Low Voltage Directive (2006/95/EC) and Electromagnetic Compatibility Directive (2004/108/EC) by application of

EN 60065: 2002+A1:2006+A11:2008	EN61000-3-3:1995+A1:2001+A2:2005
EN55022: 2006+A1:2007	EN55024:1998+A1:2001+A2:2003
EN61000-3-2:2006	EN55013:2001+A1:2003+A2 :2006
EN 300 328-1 v1.7.1	EN55020:2007
EN 301 489-17 v1.3.2 :2008	EN 301 489-1 v1.8.1 :2008
EN 300 440-1 v 1.5.1	EN 300 440-2 v.1.3.1

and the Eco-Design Directive (2009/125/EC) implemented by Regulation (EC) No 642/2009 for televisions.

The Technical documentation is kept at the below Manufacturer’s address.

Manufacturer

Samsung Electronics Co., Ltd. 416 Maetan-dong, Young-Tong gu, Suwon, Korea 442-742

	05 Jan 2011			Chang Seub Eum / Manager
	(Place and date of issue)			(Name and signature of authorized person)
Representative in the EU :
	Samsung Electronics Euro QA Lab.
	Blackbushe Business Park
	Saxony Way, Yateley, Hampshire
	GU46 6GG, UK
	06 Jan 2011			Joong Hoon Choi / Lab. Manager
	(Place and date of issue)			(Name and signature of authorized person)

Note : It is not the address of Samsung Service Centre. For the address or the phone number of Samsung Service Centre, see the warranty card or contact the retailer where you purchased your product.

This page is intentionally left blank.

Ulteriori informazioni sull’uso del Manuale elettronico (p. 14)

Le figure e le illustrazioni presenti in questo Manuale dell’utente sono fornite unicamente a titolo di riferimento e possono differire da quelle del prodotto attuale. Le specifiche e il design del prodotto possono variare senza preavviso.

Avviso relativo alla trasmissione TV digitale

1.Le funzioni relative alla trasmissione televisiva digitale (DVB) sono disponibili solo nei paesi o nelle aree in cui vengono trasmessi segnali digitali terrestri DVB-T (MPEG2 E MPEG4 AVC) o laddove l’utente abbia la possibilità di accedere a un servizio TV via cavo DVB-C (MPEG2 e MPEG4 AAC) compatibile. Verificare con il rivenditore locale la possibilità di ricevere segnali DVB-T o DVB-C.

2.DVB-T è lo standard del consorzio europeo DVB per la trasmissione della televisione digitale terrestre mentre DVB-C è lo standard per la trasmissione della televisione digitale via cavo. Tuttavia, alcune funzioni quali EPG (Electronic Program Guide), VOD (Video on Demand) e altre non sono incluse in queste specifiche. Per questo motivo, al momento non sono disponibili.

3.Sebbene questo apparecchio TV soddisfi i più recenti standard DVB-T e DVB-C, [Agosto 2008], la compatibilità con future trasmissioni digitali via cavo DVB-C e terrestri DVB-T non può essere garantita.

4.In base alla nazione o all’area in cui viene utilizzato questo televisore, alcuni fornitori di trasmissioni TV via cavo potrebbero applicare una tariffa aggiuntiva per tali servizi e richiedere all’utente di accettare i termini e le condizioni della loro offerta.

5.Alcune funzioni della TV digitale potrebbero non essere disponibili in alcuni paesi o regioni e DVB-C potrebbe non funzionare correttamente con alcuni fornitori di servizi via cavo.

6.Per ulteriori informazioni, contattare il centro di assistenza clienti Samsung locale.

La qualità di ricezione del televisore può essere influenzata dai diversi metodi di trasmissione esistenti nei vari paesi. Verificare le prestazioni del televisore presso un Rivenditore autorizzato SAMSUNG o presso un Call Centre Samsung per sapere se la qualità di ricezione può essere migliorata o meno riconfigurando le impostazioni dell’apparecchio.

Istruzioni per l’utente

•Ritenzione dell’immagine a video

Non visualizzare una immagine fissa (come la schermata di un videogioco) sul display al plasma per parecchi minuti di seguito poiché ciò potrebbe provocare la ritenzione dell’immagine. Il fenomeno di ritenzione dell’immagine è anche conosciuto come “bruciatura dello schermo”. Per evitare il fenomeno di ritenzione dell’immagine, ridurre il grado di luminosità e contrasto dello schermo quando si visualizza un’immagine fissa.

•Riscaldamento del pannello superiore del televisore al plasma

Dopo un lungo periodo di utilizzo, la parte superiore del prodotto potrebbe riscaldarsi, dato che il calore si disperde attraverso il foro di ventilazione sul pannello superiore dello schermo.

Ciò è normale e non indica alcun difetto o malfunzionamento del prodotto.

Tuttavia, si consiglia di impedire ai bambini di toccare la parte superiore del prodotto.

•Il prodotto emette degli scricchiolii.

Questo fenomeno può verificarsi quando il prodotto si contrae o si espande a causa di una variazione di temperatura o umidità ambiente. Ciò è normale e non rappresenta un difetto del prodotto.

•Difetti dei pixel

Il PDP usa un pannello composto da 2,360,000 (livello HD) a 6,221,000 (livello FHD) pixel che richiedono una speciale tecnologia di produzione. Tuttavia, sullo schermo alcuni pixel potrebbero risultare più luminosi o più scuri. Questo fenomeno non ha alcun impatto sulle prestazioni del prodotto.

•Si sconsiglia di utilizzare il prodotto a temperature inferiori ai 5°C.

•La visualizzazione prolungata di un’immagine fissa potrebbe causare un danno permanente al pannello PDP.

La visione prolungata del televisore al plasma in formato 4:3 può causare la visualizzazione di tracce di bordi sulla parte sinistra, destra e centrale dello schermo a causa delle differenti emissioni luminose dello schermo. La riproduzione di un DVD o l’uso di una console per videogiochi può causare effetti analoghi sullo schermo.

Questo tipo di danni non è coperto dalla Garanzia.

•Immagini residue sullo schermo.

La visualizzazione prolungata di immagini fisse da videogiochi e PC può causare immagini residue parziali. Per evitare questo problema, ridurre la luminosità e il contrasto mentre si visualizzano le immagini fisse.

•Garanzia

La garanzia non copre eventuali danni causati dalle immagini residue. La bruciatura dello schermo non è coperta dalla garanzia.

Corretto smaltimento del prodotto (rifiuti elettrici ed elettronici)

(Applicabile nell’Unione Europea e in altri paesi europei con sistema di raccolta differenziata)

Il marchio riportato sul prodotto, sugli accessori o sulla documentazione indica che il prodotto e i relativi accessori elettronici (quali caricabatterie, cuffia e cavo USB) non devono essere smaltiti con altri rifiuti domestici al termine del ciclo di vita. Per evitare eventuali danni all’ambiente o alla salute causati dall’inopportuno smaltimento dei rifiuti, si invita l’utente a separare il prodotto e i suddetti accessori da altri tipi di rifiuti e di riciclarli in maniera responsabile per favorire il riutilizzo sostenibile delle risorse materiali. Gli utenti domestici sono invitati a contattare il rivenditore presso il quale è stato acquistato il prodotto o l’ufficio locale preposto per tutte le informazioni relative alla raccolta differenziata e al riciclaggio per questo tipo di materiali. Gli utenti aziendali sono invitati a contattare il proprio fornitore e verificare i termini e le condizioni del contratto di acquisto. Questo prodotto e i relativi accessori elettronici non devono essere smaltiti unitamente ad altri rifiuti commerciali.

Corretto smaltimento delle batterie del prodotto

(Applicabile nei paesi dell’Unione Europea e in altri paesi europei con sistemi di conferimento differenziato delle batterie.)

Il marchio riportato sulla batteria o sulla sua documentazione o confezione indica che le batterie di questo prodotto non devono essere smaltite con altri rifiuti domestici al termine del ciclo di vita. Dove raffigurati, i simboli chimici Hg, Cd o Pb indicano che la batteria contiene mercurio, cadmio o piombo in quantità superiori ai livelli di riferimento della direttiva UE 2006/66. Se le batterie non vengono smaltite correttamente, queste sostanze possono causare danni alla salute umana o all’ambiente. Per proteggere le risorse naturali e favorire il riutilizzo dei materiali, separare le batterie dagli altri tipi di rifiuti e riciclarle utilizzando il sistema di conferimento gratuito previsto nella propria area di residenza.

Italiano - 2

Accessori

Controllare che nell’imballaggio siano contenuti i seguenti componenti. Se eventuali componenti risultassero mancanti, contattare il rivenditore.

La forma e il colore dei componenti possono variare in base al modello.Eventuali cavi non forniti in dotazione possono essere acquistati separatamente.

Una volta aperta la confezione, verificare che non vi siano accessori nascosti dietro i materiali di imballaggio.

[[ATTENZIONE: INSERIRE SALDAMENTE PER EVITARE UNO SCOLLEGAMENTO ACCIDENTALE DALL’APPARECCHIO

••	Telecomando e batterie (2 tipo AAA)	••	Panno per la pulizia
••	Istruzioni per l’utente	••	Scheda di garanzia (non disponibile in tutti i paesi)
			/ Guida alla sicurezza

Adattatore Scart

AV / Adattatore component

Adattatore scheda CI

Nucleo in ferrite (2EA)

Nucleo in ferrite (1EA)

Nucleo in ferrite per cavo di alimentazione: I nuclei in ferrite sono utilizzati per schermare i cavi dalle interferenze. Quando si collega un cavo, aprire il nucleo in ferrite e agganciarlo intorno al cavo vicino alla spina, come mostrato in figura.

xx A Distanza massima tra il nucleo in ferrite e la spina del cavo inserita nel televisore: 6~8 pollici

xx B Distanza tra il nucleo in ferrite e l’altro terminale del cavo collegato alla presa: 3/4 pollici

Nucleo in ferrite : I nuclei in ferrite sono utilizzati per schermare i cavi dalle interferenze. Quando si collega un cavo, aprire il nucleo in ferrite e agganciarlo intorno al cavo vicino alla spina, come mostrato in figura.

•• Può essere richiesto un rimborso se

A B

Cavo di alimentazione

Cavo Antenna

/ Cavo Component

(venduto

separatamente)

––(a) l’uscita del tecnico in seguito a una chiamata non rileva difetti nel prodotto (per es. nel caso l’utente abbia omesso di leggere il presente manuale)

––(b) l’utente ha portato l’unità presso un centro di riparazione che non rileva difetti nel prodotto (per es. nel caso l’utente abbia omesso di leggere il presente manuale).

•• L’importo di tale rimborso verrà comunicato all’utente prima di eseguire una visita a domicilio o un eventuale intervento di manutenzione.

Italiano - 3

Vista del Pannello di controllo

La forma e il colore del prodotto possono variare in base al modello.

Pannello di controllo

Sensore del telecomando	Puntare il telecomando in direzione di questo punto sul televisore.
Indicatore di alimentazione	Lampeggia e si spegne quando l’alimentazione è attiva, si accende in
	modalità standby.
SOURCEE	Alterna tutte le sorgenti d’ingresso disponibili. Nel menu a video, utilizzare
	questo tasto come si usa il tasto ENTEREdel telecomando.
MENU	Visualizza attraverso un menu OSD (on screen display) le funzioni del
	televisore.
Y	Regola il volume. Nel menu OSD, utilizzare i tasti Ycosì come si
	userebbero i tasti ◄ e ► del telecomando.
z	Cambia i canali. Nel menu OSD, utilizzare i tasti zcosì come si
	userebbero i tasti ▼ e ▲ del telecomando.
P(Alimentazione)	Spegne e accende il televisore.

Modalità standby

Non lasciare il televisore in modalità standby per un lungo periodo di tempo (quando si parte per le vacanze, ad esempio). Anche quando il tasto di accensione è disattivo, l’apparecchio consuma una piccola quantità di

energia elettrica. Si consiglia quindi di scollegare il cavo di alimentazione.

Messa in sicurezza della posizione di installazione

Mantenere le distanze indicate tra il prodotto e gli altri elementi presenti (per esempio le pareti) per garantire un’adeguata ventilazione.

Il mancato rispetto di questa precauzione può comportare un incendio o un malfunzionamento provocato dall’aumento della temperatura interna del prodotto.

Se si usa un piedistallo o un sistema di montaggio a parete, utilizzare solo componenti forniti da Samsung Electronics.

xx L’uso di componenti di altri produttori può causare problemi di funzionamento del prodotto o lesioni provocate dalla caduta del prodotto.

L’aspetto del prodotto può differire in base al modello.

Prestare attenzione quando si tocca il televisore poiché alcune parti potrebbero essere calde.

Installazione con piedistallo.

Installazione con supporto a parete.

10 cm

10 cm

10 cm

	10 cm
10 cm	10 cm
	10 cm

Italiano - 4