Samsung PS58C7000YM, PS58C7000YF, PS50C7000YM, PS50C7000, PS63C7000YF User Manual

...
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country
AUSTRALIA 1300 362 603 www.samsung.com NEW ZEALAND 0800 SAMSUNG (0800 726 786) www.samsung.com CHINA 400-810-5858
HONG KONG (852) 3698-4698 www.samsung.com/hk
INDIA 3030 8282
INDONESIA 0800-112-8888
JAPAN 0120-327-527 www.samsung.com MALAYSIA 1800-88-9999 www.samsung.com PHILIPPINES 1-800-10-SAMSUNG(726-7864)
SINGAPORE 1800-SAMSUNG(726-7864) www.samsung.com THAILAND 1800-29-3232
TAIWAN 0800-329-999 www.samsung.com VIETNAM 1 800 588 889 www.samsung.com
Customer Care Centre
010-6475 1880
1800 110011 1800 3000 8282 1800 266 8282
021-5699-7777
1-800-3-SAMSUNG(726-7864) 1-800-8-SAMSUNG(726-7864) 02-5805777
02-689-3232
Web Site
www.samsung.com
www.samsung.com/hk_en/ www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
Plasma TV
user manual
© 2010 Samsung Electronics Co., Ltd. All rights reserved.
imagine the possibilities
Thank you for purchasing this Samsung product. To receive more complete service, please register your product at
Model _____________ Serial No. _____________
BN68-02706A-01
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice.
User Instructions
Screen Image retention
Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes as it can cause screen image
retention. This image retention is also known as “screen burn”. To avoid such image retention, refer to page 14 of this manual to reduce the degree of brightness and contrast of the screen when displaying a still image.
Heat on the top of the Plasma TV
The top side of the product may be hot after long periods of use as heat dissipates from the panel through the vent hole in the upper part of the
product.
This is normal and does not indicate any defect or operation failure of the product. However, children should be prevented from touching the upper part of the product.
The product is making a “cracking” noise.
A “cracking” noise may occur when the product contracts or expands due to a change in the surrounding environment such as temperature or
humidity. This is normal and not a defect of the unit.
Cell Defects
The PDP uses a panel consisting of 2,360,000(HD-level) to 6,221,000(FHD-level) pixels which require sophisticated technology to produce. However,
there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
Avoid operating the TV at temperatures below 41°F (5°C)
A still image displayed too long may cause permanent damage to the PDP Panel.
Watching the Plasma TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and centre of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause similar effects to the screen. Damages caused by the above effect are not covered by the Warranty.
After-images on the Screen. Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the “brightness” and “contrast” when displaying still images for a long time.
Warranty Warranty does not cover any damage caused by image retention. Burn-in is not covered by the warranty.
Securing the Installation Space
Keep the required distance between the product and other objects (e.g. walls) to ensure proper ventilation. Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
When using a stand or wall-mount, use parts provided by Samsung Electronics only.
If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
x
The appearance may differ depending on the product.
Installation with a stand. Installation with a wall-mount.
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
2
English
Contents
Getting Started
4
Connections
8
Basic Features
10
Advanced Features
26
4 Accessories 5 Viewing the Control Panel 6 Viewing the Remote Control 7 Connecting to an Antenna 7 Plug & Play (Initial Setup)
8 Connecting to an AV Device 9 Connecting to an Audio Device 10 Changing the Input Source
10 How to Navigate Menus 11 Using the INFO button (Now & Next guide) 11 Planning Your Viewing 13 Channel Menu 14 Picture Menu 20 Sound Menu 21 Setup Menu 24 Support Menu
26 Connecting to a PC 27 Network Connection 34 Media Play 42 Anynet+ 46 Internet@TV 49 AllShare
ENGLISH
Other Information
TOOLS
This function can be used by
pressing the TOOLS button on the
remote control.
51
51 Analogue Channel Teletext Feature 52 Assembling the Cables 53 Installing the Wall Mount 54 Securing the TV to the wall 55 Troubleshooting 59 Specifications 60 Index
Check the Symbol!
Note One-Touch Button
English
3
Getting Started
Accessories
Please make sure the following items are included with your PDP TV. If any items are missing, contact your dealer.
The items’ colours and shapes may vary depending on the models.
y Remote Control & Batteries (AAA x 2) y Warranty Card / Safety Guide (Not available in some locations)
(M4 X L12)
y Blanking Bracket y Cable tie y Holder-Wire stand
y Holder-Wire (3ea) y Component Adapter y AV Adapter
y Component Sound in Adapter
Ferrite Core: The ferrite cores are used to shield the cables from interference. When connecting a cable, open the ferrite core and clip it around the cable near the plug as shown in the figure.
y Ferrite Core (2EA) y Ferrite Core (2EA)
y Cleaning Cloth y Owner’s Instructions
Distance between the ferrite core and one end of the cord put into the TV set.
y A : below 50 mm y B : below 20 mm
A
B
See separate guide for installing the stand.
y Stand (1EA) y Guide Stand (1EA) y Screws
For best cable connection to this product, be sure to use cables with a maximum thickness as below:
y Maximum thickness - 0.55 inches (14mm)
English
4
5EA (M4 X L12)
5EA (M4 X L10)
Viewing the Control Panel
The product colour and shape may vary depending on the model.
Remote control sensor
Power Indicator
Speakers
Remote control sensor Aim the remote control towards this spot on the TV.
Power Indicator Blinks and turns off when the power is on and lights up in standby mode.
SOURCE
MENU Displays an on-screen menu, the OSD (on screen display), of your TV’s features.
(Power)
Toggles between all the available input sources. In the on-screen menu, use this button as you would use the ENTER button on the remote control.
Adjusts the volume. In the OSD, use the and buttons on the remote control.
Changes the channels. In the OSD, use the and buttons on the remote control.
Turns the TV on or off.
buttons as you would use the
buttons as you would use the
01 Getting Started
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.
English
5
Getting Started
Viewing the Remote Control
Displays and selects the available video
sources (p. 10).
Turns the TV on and off.
Have direct access to channels.
Alternately select Teletext ON,
Double, Mix or OFF.
Adjusts the volume.
Opens the OSD.
Displays the Content View, which
includes Guide, Internet@TV,
Media Play, and AllShare.
Quickly select frequently used functions.
Selects the on-screen menu items and changes the values seen on the menu.
Returns to the previous menu.
POWER SOURCE ON/OFF
MUTE
MENU
PRE-CH
GUIDE
INFO
EXIT
TTX/MIX
CH LIST
CONTENT
TOOLS
RETURN
Turns the remote control light on or off. When on, the buttons become illuminated for a moment when pressed. (Using this button frequently will reduce the battery usage time in the remote control.)
Returns to the previous channel.
To mute all TV output sound.
Changes channels.
Displays channel lists on the screen (p. 12).
Displays the EPG (Electronic Programme Guide) (p. 11).
Displays information on the TV screen.
Exits the menu.
These buttons are for the
Channel Manager, Internet@TV,
Media Play menu, etc.
Use these buttons in Media Play
and Anynet+ modes (p. 34, 42).
(: Controls recording for Samsung
recorders that have the Anynet+ feature)
Installing batteries (Battery size: AAA)
English
6
A B C D
MEDIA.P
INTERNET
@TV
P.SIZEAD
NOTE
Use the remote control within 23 feet from the TV.
x
Bright light may affect the per formance of the remote control.
x
Avoid using nearby special fluorescent light or neon signs. The colour and shape may vary depending on the model.
x
3D
SUBT.
MEDIA.P: Displays Media Play (p. 34). INTERNET@: Link to various internet
services (p. 46).
3D: Activate 3D mode/menu (p. 17). AD: Turns the audio description on and
off (p. 20). This is not available in some locations.
P.SIZE: Selects the picture size (p. 16). SUBT.: Displays digital subtitles (p. 23).
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
Preset: Connecting the power cord and antenna.
VHF/UHF Antenna
Cable
or
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWER
button. Plug & Play is available only when the Input source is set to TV.
To return to the previous step, press the Red button.
ANT OUT
01 Getting Started
Selecting Store Demo or Home Use
1
Selecting a country
2
Selecting a channel
3
Setting the
Clock Mode
4
Viewing the
HD Connection Guide.
5
Enjoy your TV.
Press the or button, then press the ENTER button.
y Select the Home Use mode. Store Demo Mode is for
retail environments.
y To return the unit’s settings from Store Demo to
Home Use (standard): Press the volume button on the TV. When you see the volume OSD, press and hold
MENU for 5 sec.
Press the or button, then press the ENTER Select the appropriate country.
Press the or button, then press the ENTER button. After selecting the channel source to memorise, select Search. For more information, refer
to Channel Auto Store. (p.13)
Press the ENTER button at any time to interrupt the memorisation process.
Set the Clock Mode automatically or manually.
y Auto: Allows you to select a time zone.
Press the or button to highlight the time zone for your local area. Press the
ENTER button. (Australia only)
y Manual: Allows you to manually set the current date and time (p. 21).
The connection method for the best HD screen quality is displayed.
Press the ENTER
button.
button.
POWER
P
6
If You Want to Reset This Feature...
Select Setup - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.” If you want to change the PIN number, use the Change PIN function.
English
7
Connections
(DVI)
R-AUDIO-L
Connecting to an AV Device
Using an HDMI or HDMI / DVI Cable: HD connection (up to 1080p)
Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver, cable box, satellite receiver (STB)
DVD /
Blu-Ray player
HDMI OUT
DVI OUT
W
R
Red White
HDMI IN 1(DVI), 2(ARC), 3, 4, PC/DVI AUDIO IN
When using an HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack. For the DVI cable
x
connection, use a DVI to HDMI cable or DVI-HDMI (DVI to HDMI) adapter for video connection and the
PC/DVI AUDIO IN jacks for audio.
If an external device such as a DVD / Blu-ray player / cable box / STB satellite receiver supporting a HDMI
x
versions older than 1.4 is connected, the TV may operate abnormally (e.g. no screen display / no sound / annoying flicker / abnormal colour).
If there is no sound after connecting an HDMI cable, check the HDMI version of the external device. If you
x
suspect the version is older than 1.4, contact the provider of the device to confirm the HDMI version and request an upgrade.
Samsung TVs support the HDMI 1.4 (with 3D and Audio Return Channel). However, the ARC(Audio Return
x
Channel) function is only supported on HDMI IN 2(ARC).
– If 3D Auto View is On, some functions, such as Internet@TV, are disabled. If this is a problem, set 3D Auto
View or 3D Mode to Off.
The ARC function enables digital output of sound using the HDMI IN 2(ARC) port and can only be operated
x
when the T V is connected to an audio receiver that supports the ARC function.
– The ARC Single mode is only enabled when the TV is connected to the device when using an HDMI Standard
cable, HDMI High Speed cable, Hdmi Standard with Ethernet cable, HDMI High Speed with Ethernet cable.
– When the Input Source is the TV, the ARC function allows audio to be heard from a receiver. The audio is sent
to a receiver from the TV via an HDMI cable without the need for a separate optical cable.
It is recommended you purchase an HDMI-certified cable. Otherwise, the screen may appear blank or a
x
connection error may occur.
AUDIO OUT
DVD /
Blu-Ray player
8
English
Using a Component (up to 1080p) or Audio/Video (480i only) Cable
Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR
02 Connections
DVD /
Blu-Ray player
AUDIO OUT
COMPONENT OUT
VCR / DVD
W
R
Y
Red
White
Yellow
W
Red
R
White
RGB
Red Blue Green
To obtain the best picture quality, the Component connection is recommended over the A/V connection.
R
B
G
W R
PR PB Y
R
B
R-AUDIO-L
G
Connecting to an Audio Device
Using an Optical (Digital) or Headphone Cable Connection
Available devices: digital audio system, amplifier, DVD home theatre
OPTICAL
VCR
VIDEO OUTAUDIO OUT
R-AUDIO-L
WRWR
Y
W R
Y
digital audio system
DIGITAL AUDIO OUT (OPTICAL)
When a digital audio system is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume
x
of both the TV and the system.
5.1 CH (channel) audio is available when the T V is connected to an external device supporting 5.1 CH.
x
When the receiver (home theatre) is set to on, you can hear sound output from the TV’s optical jack. When the
x
TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theatre receiver. When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the home theatre receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theatre.
Headphones : You can connect your headphones to the headphones output on your set. While the headphones are connected, the sound from the built-in speakers will be disabled.
Sound function may be restricted when connecting headphones to the TV.
x
Headphone volume and TV volume are adjusted separately.
x
English
9
Connections
PO
WER
S
OURC
E
ON/O
FF
PRE-
CH
CO
TTX/MI
X
G
E
C
H LIST
MUTE
S
O
Changing the Input Source
Source List
Use to select TV or other external input sources such as DVD / Blu-ray players / cable box / STB satellite receiver connected to the TV.
TV /PC / AV / Component /
HDMI1/DVI / HDMI2 / HDMI3 / HDMI4 / USB
In the Source List, connected inputs will be highlighted.
PC always stay activated.
SOURCE
Basic Features
How to Navigate Menus
Before using the TV, follow the steps below to learn how to navigate the menu and select and adjust different functions.
MENU
NTENT
TOOL
1
2
1 ENTER / Direction button: Move the cursor and
select an item. Confirm the setting.
2 RETURN button: Returns to the previous menu. 3 MENU button: Displays the main on-screen menu. 4 EXIT button: Exits the on-screen menu.
RETURN
UID
INF
EXIT
3
4
Edit Name
■ VCR / DVD / Cable STB / Satellite STB / PVR STB /
AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA:
Name the device connected to the input jacks to make your input source selection easier.
When a PC with a resolution of 1920 x 1080 @ 60Hz is connected to the HDMI IN 1(DVI) port, you should set to DVI PC mode under Edit Name.
When connecting an HDMI/DVI cable to the
HDMI IN 1(DVI) port, you should set to DVI PC or
DVI Devices mode under Edit Name.
How to Operate the OSD (On Screen Display)
The access step may differ depending on the selected menu.
MENU
1
/ Select an icon with the or
2
ENTER
3
/
4
/
5
ENTER
6
EXIT
The main menu options appear on the screen:
Picture, Sound, Channel, Setup, Input, Application, Support.
button. Press ENTER to access the
sub-menu. Select the desired submenu with
the or button. Adjust the value of an item with the
or button. The adjustment in the OSD may differ depending on the selected menu.
Press ENTER to complete the configuration.
Press EXIT.
7
English
10
Using the INFO button (Now & Next guide)
The display identifies the current channel and the status of certain audio-video settings.
The Now & Next guide shows daily TV programme information for each channel according to the broadcasting time.
y Scroll , to view information for a
desired programme while watching the current channel.
y Scroll , to view information for other channels. If you
want to move to the currently selected channel, press the ENTER
DUWH
DTV
All
350
button.
Karl de r GroBe (2/ 3)
Dual
576i
Spiefilm Fr ankreich / It alien 1994 “Ka rl der GroBe” war der Wegber eiter Europas, De r abenteuerli che dreiteilig e Fernsehfilm widmet sich de m ...
|
4:3
SD
Multi | Movie
4:45 - 6:20
INFO
5:46 Su n 2 May
E
Watch Informat ion
Planning Your Viewing
Guide
The EPG (Electronic Programme Guide) information is provided by broadcasters. Using programme schedules provided by broadcasters, you can specify programmes you want to watch in advance so that the channel automatically changes to the selected programme channel at the specified time. Programme entries may appear blank or out of date depending on a channel status.
In New Zealand, if Digital Text is set to Enable, the EPG (Electronic Programme Guide) will work. (refer to page 23)
Using Channel View
GUIDE
Using Scheduled View
Guide
)
Family Affairs
)
Dark Angel
800 800
View Mode
1 6
button again and
DTV Air 800 five
Family Affairs 18:00 - 18:30
Drama
800 five
Scheduled View
18:30
Wed 29 Jul
19:15
Thu 24 Dec
1
Red (View Mode): View the list of programmes that
Tanya confesses all to a stunned Babs. Conrad is anxious to hear...
are playing now or coming up.
2
Yellow (+24 Hours): Viewing the list of programmes to
be broadcasted after 24 hours.
3
Blue (Ch. Mode): Select the type of channels you want to display on the Channel View window. (All, TV, Radio, Data/Other, My Channel 1~4)
4 Information: Displays details of the selected
programme.
5

(Page): Move to next or previous page.
6 ENTER
button.
– When selecting the current programme, you can
watch the selected programme.
– When selecting the future programme, you can
reserve to watch the selected programme. To cancel the schedule, press the ENTER select Cancel Schedules.
2:10 Tue 1 Jun
five five

Cancel
03 Basic Features
Guide
800 five
Channel View - TV
Today
27 28 800 24 16 6
2:10 Tue 1 Jun
DTV Air 800 five
Home and Away 18:00 - 18:30
Drama
Dani is devastated when scott makes clear his views on marriage...
Discovery DiscoveryH&L five price-drop.tv QVC R4DTT
View Mode

18:00 - 19:00 19:00 - 20:00
American Chopper
Programmes resume at 06:00 Home and... No Information QVC Selection No Information
+24 Hours Ch. Mode
)
Family Affairs
Information  Page
Tine Team
Fiv...
)
Dark Angel

1 2 3 4 5 6
Watch
English
11
Basic Features
B
CH LIST
B
B
Channel Manager
Delete or set favourites channels and use the programme guide for digital broadcasts. Select a channel in the Channels, My Channels or Scheduled screen.
Channels
All
TV Radio Data/Other Analogue
Zoom Select Sort  Page
Channels: Shows the channel list according to
channel type.
My Channels: Shows the group of the channel.
Scheduled: Shows all the currently reserved
programmes.
Using the colour buttons with the Channel Manager.
Green (Zoom): Enlarges or shrinks a channel
x
number.
Yellow (Select): Select desired channels and press
x
the Yellow button to set all the selected channels at the same time. The  mark appears to the left of the selected channels.
Blue (Sor t): Change the list ordered by channel
x
name or channel number.

(Page): Move to next or previous page.
x
(Tools): Displays the Channel Manager option
x
menu. (The options menus may differ depending on the situation.)
Channel Status Display Icons
358 ORF1 359 ORF2 0
360 ORF2 S
361 * BBC World 728 \ bid-up.tv c729 Boonerang
A
1 C1
A
2 C2

Tools
r
Using Favourite Channels
My Channels
(in Channel Manager) Shows all favourite channels.
Edit My Channels
: You can set the selected
channels to desired my channels group.
The “” symbol will be displayed and the channel will be set as a my channel.
1. Select a channel and press the TOOLS button.
2. Add or delete a channel in the my channel groups
you want among 1, 2, 3 and 4.
One or more groups can be selected.
x
3. After you have changed the settings, the channel list for each group can be viewed in my channel.
y
Channels
All
TV Radio Data/Other Analogue
Zoom Select Sort  Page
358 ORF1 359 ORF2 0
Edit My Channels
360 ORF2 S
Lock Timer Recording
361 * BBC World
Timer Viewing
728 \ bid-up.tv
Edit Channel Number Delete
c729 Boonerang
A
1 C1
A
2 C2

Tools
Channel List
You can see all the channels searched.
r
Icons Operations
An analogue channel.
A channel selected.
A channel set as a Favourite.
A programme currently being broadcast.

A locked channel.
A reserved programme.
English
12
Channel Menu
 Editing Channels
03 Basic Features
 Retuning Channels
Country
You can change the country. The PIN input screen appears. Enter your 4 digit PIN number.
Auto Store
Scans for a channel automatically and stores in the TV.
Automatically allocated programme numbers may not correspond to actual or desired programme numbers. If a channel is locked using the Child Lock function, the PIN input window appears.
Channel Source (Digital & Analogue / Digital /
Analogue): Select the channel source to memorise.
Manual Store
Scans for a channel manually and stores in the TV.
If a channel is locked using the Child Lock function, the PIN input window appears.
Digital Channel (Channel, Frequency, Bandwidth): When scanning has finished, channels are updated in the channel list.
The Bandwidth function is supported in New zealand and Singapore only.
Analogue Channel (Programme, Colour System, Sound System, Channel, Search): If there is abnormal sound or no sound, reselect the sound standard required.
Channel mode
P (programme mode): When tuning is complete,
x
the broadcasting stations in your area have been assigned to position numbers from P0 to P99. You can select a channel by entering the position number in this mode.
C (aerial channel mode) / S (cable channel mode):
x
These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel.
Channel Manager Option Menu (in Channel Manager)
1. Select a channel and press the TOOLS button.
2. Edit the channel name or number using the Edit Channel Name or Edit Channel Number menu.
Edit Channel Name (analogue channels only): Assign your own channel name.
Edit Channel Number (digital channels only) (Australia, Singapore only): Edit the number by pressing the number buttons desired.
 Other Features
Channel Manager
Channel Manager Option Menu
Set each channel using the Channel Manager menu options (Lock / Unlock, Timer Recording, Timer Viewing, Sort, Delete, Select All / Deselect All). Option menu items may differ depending on the channel status.
1. Select a channel and press the TOOLS button.
2. Select a function and change its settings.
Lock / Unlock: Lock a channel so that the channel cannot be selected and viewed.
NOTE
This function is available only when the Child Lock
x
is set to On. The PIN input screen appears. Enter your 4-digit PIN,
x
the default of which is “0-0-0-0.” Change the PIN using the Change PIN option.
Timer Recording (digital channels only): Allows you to record a programme currently being broadcasted or make a reservation to record a programme scheduled for broadcast.
A USB device with 4GB of memory or greater must be connected to the T V.
A USB storage device cannot record until it completes the Device Performance Test.
In case of USB-HDD, over 5400rpm
In case of USB Stick, USB 2.0 and SLC Type. (Minimum size of USB Stick is 2GB.)
Timer Viewing: You can set a desired channel to be displayed automatically at the reserved time. Set the current time first to use this function.
When a digital channel is selected, press the button to view the digital Programme.
English
13
Basic Features
Sort (analogue channels only): This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using the auto store.
Delete: You can delete a channel to display the channels you want.
Select All / Deselect All: Select all the channels or deselect all the selected channels in the channel manager.
Channel List Transfer
The PIN input screen appears. Enter your 4 digit PIN number. Imports or exports the channel map. You should connect a USB storage to use this function.
Import from USB: Import channel list from USB.
Export to USB: Export channel list to USB. this function is available when USB is connected.
Scheduled
(in Channel Manager) You can view, modify or delete a show you have reserved to
watch.
Change Info: Change a show you have reserved to watch.
Cancel Schedules: Cancel a show you have reserved to watch.
Information: Display a show you have reserved to watch. (You can also change the reservation information.)
Select All / Deselect All: Select or deselect all reserved programmes.
Picture Menu
 Changing the Preset Picture Mode
Mode
Select your preferred picture type.
Dynamic: Suitable for a bright room.
Standard: Suitable for a normal environment.
Relax: Suitable for reducing eye strain.
Relax is not available in PC mode.
Movie: Suitable for watching movies in a dark room.
 Adjusting Picture Settings
Cell Light / Contrast / Brightness / Sharpness / Colour / Tint (G/R)
Your television has several setting options for picture quality control.
NOTE
In analogue TV, AV modes of the PAL system, the
x
Tint (G/R) function is not available. In PC mode, you can only make changes to
x
Cell Light, Contrast and Brightness. Settings can be adjusted and stored for each
x
external device connected to the TV.
 Economical Solutions
Edit Channel Number (Disable / Enable)
(New Zealand only) Edit the number by pressing the number buttons desired.
Fine Tune
(analogue channels only) If the signal is weak or distorted, fine tune the channel
manually.
Fine tuned channels are marked with an asterisk “*.”
To reset the fine-tuning, select Reset.
English
14
Eco Solution
■ Energy Saving (Off / Low / Medium / High /
Picture Off)
TV in order to reduce power consumption. If you select Picture Off, the screen is turned off, but the sound remains on. Press any button except volume button to turn on the screen. Until the screen turns on again, a distorted picture will be displayed for about 4 seconds.
Eco Sensor (Off / On): To enhance your power savings; the picture settings will automatically adapt to the light in the room.
Min Cell Light: When Eco sensor is On, the minimum screen brightness can be adjusted manually.
If you adjust the Cell Light, the Eco Sensor will be set to Off.
If Eco Sensor is On, the display brightness may change (become slightly darker or brighter) depending on the surrounding light intensity.
: Adjust the brightness of the
No-Signal Power Off (Off / 15 min / 30 min / 60 min): To avoid unnecessary energy consumption, set how long you want the TV to remain on if it’s not receiving a signal.
Disabled when the PC is in power saving mode.
 Changing the Picture Options
Advanced Settings
(available in Standard / Movie mode) You can adjust the detailed setting for the screen including
colour and contrast.
In PC mode, you can only make changes to Dynamic Contrast, Gamma and White Balance.
Advanced Settings
Black Tone : Off ► Dynamic Contrast : Medium Gamma : 0
Expert Pattern : Off
RGB Only Mode : Off Colour Space : Native White Balance ▼
Move

Enter

Return
Black Tone (Off / Dark / Darker / Darkest): Select the black level to adjust the screen depth.
Dynamic Contrast (Off / Low / Medium / High): Adjust the screen contrast.
Gamma: Adjust the primary colour intensity.
Expert Pattern (Off / Pattern1 / Pattern2): By running the Expert Pattern function, the picture can be calibrated without a generator or filter. If the OSD menu disappears or a menu other than the Picture menu is opened, the calibration is saved and the Expert Pattern window disappears.
While the Exper t Pattern is running, sound is not outputted.
Only enabled in DTV, Component and HDMI modes.
RGB Only Mode (Off / Red / Green / Blue): You can adjust Colour or Tint (G/R) of Red, Green or Blue for the picture from an external device (DVD player, home theatre, etc.).
Colour Space (Auto / Native / Custom): Adjust the range of colours available to create the image. To adjust
Colour, Red, Green, Blue and Reset, set Colour Space to Custom.
White Balance: Adjust the colour temperature for a more natural picture.
R-Offset / G-Offset / B-Offset: Adjust each colour’s (red, green, blue) darkness.
R-Gain / G-Gain / B-Gain : Adjust each colour’s (red, green, blue) brightness.
Reset: Resets the White Balance to it’s default settings.
10p White Balance (Off / On): Controls the white balance in 10 point interval by adjusting the red, green, and blue brightness.
Available when the picture mode is set to Movie and when the external input is set to all input.
Some external devices may not support this function.
Interval: Select interval to adjust. Red: Adjust the red level. Green: Adjust the green level. Blue: Adjust the blue level. Reset: Resets the 10p White Balance to its default
settings
Flesh Tone: Emphasize pink “Flesh Tone.”
Edge Enhancement (Off / On): Emphasize object boundaries.
xvYCC (Off / On): Setting the xvYCC mode on increases detail and colour space when watching movies from an external device (e.g. DVD player) connected to the HDMI or Component IN jacks.
Available when the picture mode is set to Movie and when the external input is set to HDMI or Component.
Some external devices may not support this function.
Picture Options
In PC mode, you can only make changes to the Colour Tone, Size and Screen Burn Protection.
Picture Options
Colour Tone : Normal ► Size : 16:9 Digital Noise Filter : Auto MPEG Noise Filter : Auto
HDMI Black Level : Normal
Film Mode : Off Motion Judder Canceller : Standard
Move

Enter

Return
03 Basic Features
English
15
Basic Features
Colour Tone (Cool / Normal / Warm1 / Warm2)
Warm1 or Warm2 will be deactivated when the picture mode is Dynamic.
Settings can be adjusted and stored for each external device connected to an input on the T V.
Size: Your cable box/satellite receiver may have its own set of screen sizes as well. However, we highly recommend you use 16:9 mode most of the time.
Auto Wide (New Zealand, Singapore only): Automatically adjusts the picture size to the 16:9 aspect ratio.
16:9 : Adjusts the picture size to 16:9 for DVDs or wide broadcasting.
Wide Zoom: Magnifies the picture size more than 4:3.
Adjusts the Position by using , buttons.
Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size.
Adjusts the Position or Size by using , buttons.
4:3 : The default setting for a movie or normal broadcasting.
Do not watch in 4:3 format for a long time. Traces of borders displayed on the left, right and centre of the screen may cause image retention(screen burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are inputted.
NOTE
When Double (, ) mode has been set in PIP,
x
the Picture Size cannot be set. Depending on the input source, the picture size
x
options may vary. The available items may differ depending on the
x
selected mode. In PC mode, only 16:9 and 4:3 modes can be
x
adjusted. Settings can be adjusted and stored for each
x
external device connected to an input of the TV. After selecting Screen Fit in HDMI (1080i / 1080p)
x
or Component (1080i / 1080p) mode: Adjusts the Position or Size by using , ▼, , button.
If you use the Screen Fit function with HDMI 720p
x
input, 1 line will be cut at the top, bottom, left and right as in the overscan function.
Screen Mode (16:9 / Wide Zoom / Zoom / 4:3) (New Zealand, Singapore only): Available only when picture size is set to Auto Wide. You can determine the desired picture size at the 4:3 WSS (Wide Screen Service) size or the original size. Each European country requires different picture size.
Not available in PC, Component or HDMI mode.
English
16
P.SIZE
■ Digital Noise Filter (Off / Low / Medium / High / Auto / Auto Visualisation): When the broadcast signal is
weak, some static and ghosting may appear. Select one of the options until the best picture is displayed.
Auto Visualisation: When changing analogue channels, displays the intensity of the current signal and defines the screen noise filter.
Only available for analogue channels.
MPEG Noise Filter (Off / Low / Medium / High / Auto): Reduces MPEG noise to provide improved picture quality.
HDMI Black Level (Normal / Low): Selects the black level on the screen to adjust the screen depth.
Available only in HDMI mode.
Film Mode (Off / Auto1 / Auto2 / Cinema Smooth): Sets the TV to automatically sense and process film signals from all sources and adjust the picture for optimum quality.
Available in TV, AV, COMPONENT (480i / 1080i) and HDMI (480i / 1080i).
An 1080p 24Hz HDMI signal must be input to use the Cinema Smooth function.
Motion Judder Canceller (Off / Standard / Smooth / Demo): Removes drag from fast scenes with a lot of movement to provide a clearer picture.
If Motion Judder Canceller is Demo, you can compare the difference between on and off modes.
Screen Burn Protection: To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. The Time setting allows you to programme the time between movement of the picture in minutes.
Pixel Shift (Off / On): Using this function, you can minutely move pixels on the PDP in horizontal or vertical direction to minimize after image on the screen.
Optimum condition for pixel shift
Item
Horizontal 0~4 4
Vertical 0~4 4
Time (minute) 1~4 min 4 min
The Pixel Shift value may differ depending on the monitor size (inches) and mode.
This function is not available in the Screen Fit mode.
Auto protection Time (10 min / 20 min / 40 min / 1 hour / Off): If the screen remains idle with a still image
for a certain period of time defined by the user, the screen saver is activated to prevent the formation of ghost images on the screen.
Scrolling: This function removes after-images on the screen by moving all the pixels on the PDP according to a pattern. Use this function when there are remaining after images or symbols on the screen, especially when you displayed a still image on the screen for a long time.
TV/AV/Component/
HDMI/PC
The after-image removal function has to be executed for a long time (approximately 1 hour) to effectively remove after-images on the screen. If the after-image is not removed after performing the function, repeat the function again.
Press any key on the remote control to cancel this feature.
Side Grey (Light / Dark): When you watch TV with the screen ratio of 4:3, the screen is prevented from any damage by adjusting the white balance on both extreme left and right sides.
 Viewing TV using the 3D function
IMPORTANT SAFETY INFORMATION. READ THE FOLLOWING WARNINGS BEFORE YOU OR YOUR CHILD USE THE 3D FUNCTION
WARNING
As the TV turns on, the left and right sides of 3D
x
pictures may overlap more than usual. It may take time until the picture quality is optimized.
The 3D effect may be experienced differently
x
depending on the viewer. You may not notice the 3D effect at all if you have a prescription for one eye that is very different from the other eye.
Parents’ careful super vision is required particularly
x
when children or teenagers view 3D images. Photosensitive Seizure Warning and Other Health Risks
x
– Some viewers may experience an epileptic seizure
or stroke when exposed to certain flashing images or lights contained in certain television pictures or video games. If you or any of your relatives has a history of epilepsy or strokes, please consult with a medical specialist before using the 3D function.
– Do not watch 3D pictures when you feel
incoherent, sleepy, tired or sick. Avoid watching 3D pictures for long hours.
– Even those without a personal or family history
of epilepsy or stroke may have an undiagnosed condition that can cause “photosensitive epileptic seizures.”
– If you experience any of the following symptoms
immediately stop watching 3D pictures and consult a medical specialist: (1) altered vision;
(2) lightheadedness; (3) dizziness; (4) involuntary movements such as eye or muscle twitching; (5) confusion; (6) nausea; (7) loss of awareness; (8) convulsions; (9) cramps; and/ or (10) disorientation. Parents should monitor
and ask their children about the above symptoms­children and teenagers may be more likely than adults to experience these symptoms.
Note that watching TV while sitting too close to the screen
x
for an extended period of time may weaken your eyesight. Note that watching TV while wearing 3D Active
x
Glasses for an extended period of time may cause a headache or fatigue. If you feel headache, fatigue or dizziness, stop watching TV and rest.
Some 3D pictures may startle viewers. The pregnant,
x
elderly, epileptic and those suffering from serious physical conditions are advised to avoid utilizing the unit’s 3D functionality.
We don’t recommend 3D pictures to those who are
x
in bad physical condition, who are sleep-deprived or who drank liquor.
Please take care to be aware of the world around
x
you. This product is designed to be immersive. DO NOT use this product near open stairwells, cables, balconies, or other objects that can be tripped over, run into, knocked down, broken or fallen over. Being startled or deluding yourself into thinking that the 3D images are real may cause you to crush a nearby object or get injured trying to move your body.
Do not use the 3D Active Glasses for any other
x
purpose than for which it was designed. Wearing the with an HDMI/DVI for any other purpose (as general spectacles, sunglasses, protective goggles, etc.) may physically harm you or weaken your eyesight.
Immersive video can potentially have adverse effects
x
on the user including motion sickness, perceptual after effects, disorientation, eye strain, and decreased postural stability. Take frequent breaks to lessen the potential of these effects, as is commonly suggested for other items, such as keyboards and computer monitors, that you may tend to fixate or concentrate on. If your eyes show signs of fatigue or dryness or if you have any of the above symptoms, immediately discontinue use of this device and do not resume using it for at least thirty minutes after the symptoms have subsided.
The ideal viewing distance should be three times or
x
more the height of the screen. We recommend sitting with viewer’s eyes on a level with the screen.
3D
This exciting new feature enables you to view 3D content. In order to fully enjoy this feature, you must purchase a pair of Samsung 3D Active Glasses (SSG­2100AB, SSG-2200AR, SSG-2200KR) to view 3D video.
Samsung 3D Active Glasses are sold separately. For more detailed purchasing information, contact the retailer where you purchased this TV.
3D emitter
The LED on the 3D emitter blinks only when sending a 3D signal.
If there is any obstacle between the emitter and 3D Active Glasses, the proper 3D effect may not be obtained.
3D
English
03 Basic Features
17
Basic Features
3D Mode: Select the 3D input format.
If you want to feel the 3D effect fully, please wear the 3D Active Glasses first, and then select 3D mode from the list below that provides the best 3D viewing experience.
When watching 3D images, turn on 3D Active Glasses.
3D Mode Operation
Off Turns the 3D function off.
2D 3D
Side by Side
Top & Bottom
Line by Line
Vertical Stripe
Checker Board
Frequency
Side by Side” and “Top & Bottom” are available when the resolution is 720p, 1080i and 1080p in DTV, HDMI and USB mode or set to PC connecting through HDMI/DVI cable.
“Vertical Strip”, “Line by Line” and “Checker Board” are available when the resolution is set to PC connecting through HDMI/DVI cable.
“Frequency” displays the frequency (60Hz only) when the resolution is set to PC.
3D 2D (Off / On): Displays the image for the left eye
only.
This function is deactivated when 3D Mode set to “2D 3D” or Off.
Depth: Adjusts focus / depth in “2D 3D” mode.
This function is only activated when the 3D Mode is “2D 3D”.
Picture Correction: Adjusts the images for the left and right eye.
Changes a 2D image to 3D.
Displays two images next to each other.
Displays one image above another.
Displays the images for the left and right eye alternately in rows.
Displays the images for the left and right eye alternately in columns.
Displays the images for the left and right eye alternately in pixels.
Displays the images for the left and right eye alternately in frames.
3D Auto View (Off / On): If 3D Auto View is set to On, a “Side by Side” format HDMI signal with one of the resolutions below is automatically switched to 3D. Here, correct 3D information must be sent from the HDMI 1.3 transmitter.
If a 3D failure occurs due to a 3D information error, set 3D Auto View to Off and manually select a 3D Mode using the 3D button or corresponding menu.
Support resolution (16:9 only)
Resolution Frequency (Hz)
1280 x 720p 50 / 60 Hz 1920 x 1080i 50 / 60 Hz
1920 x 1080p 24 / 30 / 50 / 60 Hz
Resolution supported for HDMI PC mode
The resolution for HDMI PC mode is optimized to 1920 x 1080 input.
An input resolution other than 1920 x 1080 may not be displayed properly in 3D display or full screen mode.
How to watch the 3D image
3D
To watch in 3D, wear 3D glasses and press the power button on the glasses.
Viewing 3D TV motion pictures for long periods may cause eye fatigue and/or dizziness.
OK
Cancel
Move

Enter

Exit
3D3D
Using the LEFT / RIGHT keys on the remote control,
Using the LEFT / RIGHT keys on the remote control,
select the icon suitable for the picture on screen.
select the icon suitable for the picture on screen.
Move

Enter

Move

1. Press the CONTENT button, then the Content View menu will appear.
2. Press the or button, then select 3D. To watch in 3D, wear 3D Active Glasses and press the
power button on the glasses.
3. Select OK, then press the ENTER
4. Using the or buttons on your remote control,
selects the 3D Mode of the image you want to view.
Some 3D modes may not be available depending on the format of the image source.
Enter

button.
Exit
Exit
18
English
Supported formats and operating specifications for HDMI 1.4
Source signal format Standard HDMI 1.4 3D
1920x1080p@24Hz x 2 1920x2205p@24Hz
1280x720p@60Hz x 2 1280x1470p@60Hz
1280x720p@50Hz x 2 1280x1470p@50Hz
The mode is automatically switched to 3D mode for the 3D video input in one of the formats above.
For the HDMI 1.4@24Hz format, the TV is optimized as follows:
Judder Reduction Display Mode: When Motion
Judder Canceller is set to Smooth, you can watch a smooth picture without judder.
Before using 3D function...
NOTE
You may notice a small amount of screen flickering
x
when watching 3D images in poor light conditions (from a strobe light, etc.), or under a fluorescent lamp (50Hz ~ 60Hz) or 3 wavelength lamp. If so, dim the light or turn the lamp off.
3D mode is automatically disabled in following cases:
x
when changing a channel or the input source, or accessing Media Play or Internet@TV.
Some Picture functions are disabled in 3D mode.
x
PIP and data broadcast is not supported in 3D
x
mode. Data broadcasts (MHEG / MHP) are not supported
x
in 3D mode. 3D Active Glasses from other manufacturers may not
x
be supported. The 3D Active Glasses may not work properly if there
x
is any other 3D product or electronic devices turned on near the glasses or TV. If there is a problem, keep other electronic devices as far away as possible from the 3D Active Glasses.
When watching pictures from a 50Hz 3D source with
x
its Game mode On, visually-sensitive viewers may see some flicker on bright images.
Photos of Media Play are shown in “2D 3D”
x
mode only.
If lying on your side, the 3D-effects may not be
x
displayed. Be sure to stay within the viewing angle and optimum
x
TV viewing distance when watching 3D pictures.
– Otherwise, you may not be able to enjoy proper 3D
effects.
Picture Reset (OK / Cancel)
Resets your current picture mode to its default settings.
 Setting up the TV with Your PC
Set the input source to PC.
Auto Adjustment
Adjust frequency values/positions and fine tune the settings automatically.
Not available when connecting with an HDMI/DVI cable.
Screen
Coarse / Fine: Removes or reduces picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Fine­tune again. After the noise has been reduced, readjust the picture so that it is aligned to the centre of screen.
Position: Adjust the PC screen position with direction button ( / / / ).
Image Reset: Resets the image to default settings.
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP) Depending on the version of Windows and the video card,
the actual screens on your PC may differ in which case the same basic set-up information will almost always be applied. (If not, contact your computer manufacturer or Samsung Dealer.)
1. Click on “Control Panel” on the Windows start menu.
2. Click on “Appearance and Themes” in the “Control
Panel” window and a display dialog-box will appear.
3. Click on “Display” and a display dialog box will appear.
4. Navigate to the “Settings” tab on the display dialog-box.
y The correct size setting (resolution) [Optimum: 1920 X
1080 pixels]
y If a vertical-frequency option exists on your display
settings dialog box, the correct value is “60” or “60 Hz”. Otherwise, just click “OK” and exit the dialog box.
03 Basic Features
English
19
Loading...
+ 42 hidden pages