SAMSUNG PS50C7780YS, PS63C7780 User Manual

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Country

AUSTRIA 0810 - SAMSUNG (7267864, € 0.07/min) www.samsung.com/at
BELGIUM 02-201-24-18 www.samsung.com/be (Dutch)

CZECH 800 - SAMSUNG (800-726786) www.samsung.com/cz

DENMARK 70 70 19 70 www.samsung.com/dk
FINLAND 030 - 6227 515 www.samsung.com/
FRANCE 01 48 63 00 00 www.samsung.com/fr
GERMANY 01805 - SAMSUNG (726-7864 € 0,14/Min) www.samsung.de
HUNGARY 06-80-SAMSUNG (726-7864) www.samsung.com/hu
ITALIA 800-SAMSUNG (726-7864) www.samsung.com/it
LUXEMBURG 261 03 710 www.samsung.com/lu
NETHERLANDS 0900-SAMSUNG (0900-7267864) (€ 0,10/Min) www.samsung.com/nl
NORWAY 815-56 480 www.samsung.com/no
POLAND 0 801 1SAMSUNG (172678)

PORTUGAL 80820-SAMSUNG (726-7864) www.samsung.com/pt
SLOVAKIA 0800-SAMSUNG (726-7864) www.samsung.com/sk
SPAIN 902 - 1 - SAMSUNG (902 172 678) www.samsung.com/es
SWEDEN 0771 726 7864 (SAMSUNG) www.samsung.com/se
TURKEY 444 77 11 www.samsung.com/tr
U.K 0845 SAMSUNG (7267864) www.samsung.com/uk
EIRE 0818 717100 www.samsung.com/ie
SWITZERLAND 0848 - SAMSUNG (7267864, CHF 0.08/min) www.samsung.com/ch

LITHUANIA 8-800-77777 www.samsung.com/lt
LATVIA 8000-7267 www.samsung.com/lv
ESTONIA 800-7267 www.samsung.com/ee

Customer Care Centre

Samsung Zrt., česká organizační složka, Oasis Florenc, Sokolovská394/17, 180 00, Praha 8

022-607-93-33

Web Site

www.samsung.com/be_fr (French)

www.samsung.com/pl

www.samsung.com/ch_fr/(French)

Plasma TV user manual

Plasma TV

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at

www.samsung.com/register

Model _____________ Serial No. _____________

© 2010 Samsung Electronics Co., Ltd. All rights reserved.

[7790_GER]BN68-02696K-00L04.indb 1 2010-03-26 오후 4:14:34

BN68-02696K-00

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
Product design and specifications may be changed without notice.

Digital TV notice

1. Functionalities related to Digital TV (DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC) digital terrestrial signals are

broadcasted or where you are able to access to a compatible DVB-C (MPEG2 and MPEG4 AAC) cable-TV service. Please check with your local
dealer the possibility to receive DVB-T or DVB-C signal.

2. DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB-C is that for the broadcast

transmission of digital TV over cable. However, some differentiated features like EPG (Electric Programme Guide), VOD (Video On Demand) and so
on, are not included in this specification. So, they cannot be workable at this moment.

3. Although this TV set meets the latest DVB-T and DVB-C standards, as of [August, 2008], the compatibility with future DVB-T digital terrestrial and

DVB-C digital cable broadcasts cannot be guaranteed.

4. Depending on the countries/areas where this TV set is used some cable-TV providers may charge an additional fee for such a service and you may

be required to agree to terms and conditions of their business.

5. Some Digital TV functions might be unavailable in some countries or regions and DVB-C might not work correctly with some cable service providers.

6. For more information, please contact your local Samsung customer care centre.

The reception quality of TV may be affected due to differences in broadcasting method between the countries. Please check the TV

✎

performance in the local SAMSUNG Authorized Dealer, or the Samsung Call Centre whether it can be improved by reconfiguring TV setting or
not.

User Instructions

• Screen Image retention

Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes as it can cause screen image

retention. This image retention is also known as “screen burn”. To avoid such image retention, refer to page 17 of this manual to reduce the degree of
brightness and contrast of the screen when displaying a still image.

• Heat on the top of the Plasma TV

The top side of the product may be hot after long periods of use as heat dissipates from the panel through the vent hole in the upper part of the

product.

This is normal and does not indicate any defect or operation failure of the product.
However, children should be prevented from touching the upper part of the product.

• The product is making a “cracking” noise.

A “cracking” noise may occur when the product contracts or expands due to a change in the surrounding environment such as temperature or

humidity. This is normal and not a defect of the unit.

• Cell Defects

The PDP uses a panel consisting of 2,360,000(HD-level) to 6,221,000(FHD-level) pixels which require sophisticated technology to produce. However,

there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.

• Avoid operating the TV at temperatures below 41°F (5°C)

• A still image displayed too long may cause permanent damage to the PDP Panel.

Watching the Plasma TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and centre of
the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause similar effects to
the screen.
Damages caused by the above effect are not covered by the Warranty.

• After-images on the Screen.

Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.
To prevent this effect, reduce the “brightness” and “contrast” when displaying still images for a long time.

• Warranty
Warranty does not cover any damage caused by image retention.
Burn-in is not covered by the warranty.

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)

This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger,
headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible
harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste
and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the
retailer where they purchased this product, or their local government office, for details of where and how they can take these items
for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase
contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return systems)

This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other
household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery
contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of,
these substances can cause harm to human health or the environment. To protect natural resources and to promote material
reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.

English

2

[7790_GER]BN68-02696K-00L04.indb 2 2010-03-26 오후 4:14:35

Contents

Getting Started

4

Connections

8

Basic Features

12

Advanced Features

29

4 Accessories
5 Viewing the Control Panel
6 Viewing the Remote Control
7 Connecting to an Antenna
7 Plug & Play (Initial Setup)

8 Connecting to an AV Device
10 Connecting to an Audio Device
11 Changing the Input Source

12 How to Navigate Menus
12 Using the INFO button (Now & Next guide)
12 Planning Your Viewing
14 Channel Menu
17 Picture Menu
23 Sound Menu
25 Setup Menu
28 Support Menu

29 Connecting to a PC
30 Network Connection
37 Media Play
46 Anynet+
50 Internet@TV
53 AllShare

ENGLISH

Other Information



TOOLS

This function can be used by

pressing the TOOLS button on the

remote control.

55

55 Analogue Channel Teletext Feature
56 Assembling the Cables
57 Installing the Wall Mount
58 Securing the Installation Space
59 Securing the TV to the wall
60 Troubleshooting
64 Specifications
65 Index

Check the Symbol!

Note One-Touch Button

English

3

[7790_GER]BN68-02696K-00L04.indb 3 2010-03-26 오후 4:14:36

Getting Started

Accessories

✎

Please make sure the following items are included with your PDP TV. If any items are missing, contact your dealer.

✎

The items’ colours and shapes may vary depending on the models.

✎

Cables not included in the package contents can be purchased separately.

y Remote Control & Batteries (AAA x 2)
y Warranty Card / Safety Guide (Not available in some locations)

(M4 X L12)

y Blanking Bracket & Screw (X1) y Holder-Ring (4EA) y Holder-Wire stand

y Cable Tie y Holder-Wire (3EA) y Ferrite Core (2EA) y Ferrite Core (2EA)

y Component Adapter y AV Adapter y SCART Adapter (1EA)

y Cleaning Cloth
y Owner’s Instructions

See separate guide for installing the stand.

s

s

s

y Stand (1EA) y Guide Stand (1EA) y Screws (10EA)

✎

Ferrite Core: The ferrite cores are used to shield
the cables from interference. When connecting
a cable, open the ferrite core and clip it around
the cable near the plug as shown in the figure.

✎

For best cable connection to this product, be sure to use cables with a maximum thickness as below:

y Maximum thickness - 0.55 inches (14mm)

s

s

Distance between the ferrite core and one end
of the cord put into the TV set.

A

B

5 EA (M4 X L12)

5 EA (M4 X L10)

y A : below 50 mm
y B : below 20 mm

English

4

[7790_GER]BN68-02696K-00L04.indb 4 2010-03-26 오후 4:14:40

Viewing the Control Panel

✎

The product colour and shape may vary depending on the model.

Power Indicator
Remote control sensor

Speakers

Power Indicator Blinks and turns off when the power is on and lights up in standby mode.
Remote control sensor Aim the remote control towards this spot on the TV.

SOURCE

MENU Displays an on-screen menu, the OSD (on screen display) of your TV’s features.









(Power)

Toggles between all the available input sources. In the on-screen menu, use this
button as you would use the ENTER button on the remote control.

Adjusts the volume. In the OSD, use the
and ► buttons on the remote control.

Changes the channels. In the OSD, use the
▼ and ▲ buttons on the remote control.

Turns the TV on or off.



buttons as you would use the ◄



buttons as you would use the

01 Getting Started

Standby mode

Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount
of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.

English

5

[7790_GER]BN68-02696K-00L04.indb 5 2010-03-26 오후 4:14:40

Getting Started

Viewing the Remote Control

Displays and selects the available video

sources (p. 11).

Turns the TV on and off.

Have direct access to channels.

Alternately selects Teletext, Double or

Mix.

Adjusts the volume.

Opens the OSD.

Displays the Content View, which
includes Guide, 3D, Internet@TV,

Media Play, and AllShare.

Quickly select frequently used functions.

Selects the on-screen menu items and
changes the values seen on the menu.

Returns to the previous menu.

POWER

TTX/MIX

CONTENT

TOOLS

RETURN

SOURCE

MUTE

CH LIST

MENU

ON/OFF

PRE-CH

GUIDE

INFO

EXIT

Turns the remote control light on or
off. When on, the buttons become
illuminated for a moment when pressed.
(Using the remote control with this button
set to On will reduce the battery usage
time.)

Returns to the previous channel.

Cuts off the sound temporarily.

Changes channels.

Displays channel lists on the screen
(p. 14).

Displays the EPG (Electronic Programme
Guide) (p.12).

Displays information on the TV screen.

Exits the menu.

Channel Manager, 3D, Internet@TV,

Use these buttons in Media Play and

Anynet+ (HDMI-CEC) modes. (p. 37, 46)

Samsung recorders that support the

Anynet+(HDMI-CEC),TimeShift and PVR

These buttons are for the

Media Play menu, etc.

(The  also controls recording for

features.)

Installing batteries (Battery size: AAA)

English

6

A B C D

MEDIA.P

INTERNET

@TV

P.SIZEAD

✎

NOTE

Use the remote control within 23 feet from the TV.

x

Bright light may affect the performance of the remote control.

x

Avoid using nearby special fluorescent light or neon signs.
The colour and shape may vary depending on the model.

x

3D

SUBT.

MEDIA.P: Displays Media Play (p. 37).
INTERNET@TV: Link to various internet

services (p. 50).

3D: Sets the video, which provided with

3D signal (p. 21).

AD: Turns the audio description on and

off (p. 24). This is not available in some
locations.

P.SIZE: Selects the picture size (p. 19).
SUBT.: Displays digital subtitles (p. 26).

[7790_GER]BN68-02696K-00L04.indb 6 2010-03-26 오후 4:14:41

Connecting to an Antenna

When the TV is initially powered on, basic settings proceed automatically.

✎

Preset: Connecting the mains and antenna.

01 Getting Started

Satellite Antenna

ANT 2 IN

(

SATELLITE

ANT 1 IN

)

(

AIR/CABLE

)

or

VHF/UHF Antenna

Cable

ANT OUT

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the

POWER button. Plug & Play is available only when the Input source is set to TV.

✎

To return to the previous step, press the Red button.

Selecting a language

1

Selecting Store Demo or
Home Use

2

Selecting a country

3

Selecting an antenna

4

Selecting a channel

5

Setting the Clock Mode Set the Clock Mode automatically or manually.

6

Time Zone

7

Viewing the

HD Connection Guide.

8

Enjoy your TV.

Press the ▲ or ▼ button, then press the ENTER
Select the desired OSD (On Screen Display) language.

Press the ◄ or ► button, then press the ENTER

• Select the Home Use mode. Store Demo Mode is for retail environments.

• To return the unit’s settings from Store Demo to Home Use (standard): Press the volume
button on the TV. When the OSD volume is displayed, press and hold MENU for 5 sec.

Press the ▲ or ▼ button, then press the ENTER
Select the appropriate country.

After selecting the country in the Country menu, some models may proceed with an additional option to setup

✎

the pin number.
When you input the PIN number, 0-0-0-0 is not available.

✎

Press the ▲ or ▼ button, then press the ENTER button.
Select Air, Cable or Satellite.

Press the ▲ or ▼ button, then press the ENTER
Select the channel source to memorise. When setting the antenna source to Cable, a step appears allowing you
to assign numerical values (channel frequencies) to the channels. For more information, refer to Channel → Auto
Store (p. 14).

When Air or Cable is selected first: After all Air or Cable channels are stored, the step for storing Satellite

✎

channels is displayed.
When Satellite is selected first: After all Satellite channels are stored, the step for storing Air or Cable

✎

channels is displayed.
Press the ENTER button at any time to interrupt the memorization process.

✎

Press the ▲ or ▼ button to select Auto, then press the ENTER button.
Press the ▲ or ▼ button to select the your time zone, then press the ENTER button. (depending on the

country)

The connection method for the best HD screen quality is displayed.

Press the ENTER button.









button.

button.

button.

button.

POWER

P

9

If You Want to Reset This Feature...

Select Setup - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.” If you want to
change the PIN number, use the Change PIN function.

English

[7790_GER]BN68-02696K-00L04.indb 7 2010-03-26 오후 4:14:42

7

Connections

R-AUDIO-L

Connecting to an AV Device

Using an HDMI or HDMI/DVI cable: HD connection (up to 1080p)

Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver, cable box, satellite receiver
(STB)

DVD /

Blu-ray player

HDMI OUT

DVD /

v

Blu-ray player

W

R

Red White

✎

HDMI IN 1(DVI), 2(ARC), 3, 4, PC/DVI AUDIO IN

When using an HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack. For the DVI cable

x

connection, use a DVI to HDMI cable or DVI-HDMI (DVI to HDMI) adapter for video connection and the

PC/DVI AUDIO IN jacks for audio.

If an external device such as a DVD / Blu-ray player / cable box / STB satellite receiver supporting a HDMI

x

versions older than 1.4 is connected, the TV may operate abnormally (e.g. no screen display / no sound /
annoying flicker / abnormal colour).

If there is no sound after connecting an HDMI cable, check the HDMI version of the external device. If you

x

suspect the version is older than 1.4, contact the provider of the device to confirm the HDMI version and
request an upgrade.

Samsung TVs support the HDMI 1.4 (with 3D and Audio Return Channel). However, the ARC(Audio Return

x

Channel) function is only supported on HDMI IN 2(ARC).

– If 3D Auto View is On, some functions, such as Internet@TV, are disabled. If this is a problem, set

3D Auto View or 3D Mode to Off.

The ARC function enables digital output of sound using the HDMI IN 2(ARC) port and can only be operated

x

when the TV is connected to an audio receiver that supports the ARC function.

– The ARC Single mode is only enabled when the TV is connected to the device when using an HDMI Standard

cable, HDMI High Speed cable, Hdmi Standard with Ethernet cable, HDMI High Speed with Ethernet cable.

– When the Input Source is the TV, the ARC function allows audio to be heard from a receiver. The audio is sent

to a receiver from the TV via an HDMI cable without the need for a separate optical cable.

It is recommended you purchase an HDMI-certified cable. Otherwise, the screen may appear blank or a

x

connection error may occur.

DVI OUT

AUDIO OUT

English

8

[7790_GER]BN68-02696K-00L04.indb 8 2010-03-26 오후 4:14:43

Using a Component (up to 1080p) or Audio/Video (480i only) and Scart Cable

Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR

02 Connections

DVD /

Blu-ray player

COMPONENT OUT

R

B

G

W R

W R

Y

PR PB Y

R

VCR / DVD

RGB

EXT

W

W

R

✎

In Ext. mode, DTV Out supports MPEG SD Video and Audio only.

✎

To obtain the best picture quality, the Component connection is recommended over the A/V connection.

RGB

R

Y

RedRed WhiteWhite YellowRed Blue Green

AUDIO OUT

R-AUDIO-L

B

G

R-AUDIO-L

VCR

WRWR

VIDEO OUTAUDIO OUT

Y

English

9

[7790_GER]BN68-02696K-00L04.indb 9 2010-03-26 오후 4:14:44

Connections

Connecting to an Audio Device

Using an Optical (Digital) or Audio (Analogue) Cable or Headphone Connection

Available devices: digital audio system, amplifier, DVD home theatre

OPTICAL

✎

DIGITAL AUDIO OUT (OPTICAL)

When a digital audio system is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume

x

of both the TV and the system.

5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.

x

When the receiver (home theatre) is set to on, you can hear sound output from the TV’s optical jack. When the

x

TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theatre receiver. When the source is
a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is
connected to the TV via HDMI, only 2 CH audio will be heard from the home theatre receiver. If you want to
hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite
receiver directly to an amplifier or home theatre.

✎

Headphones : You can connect your headphones to the headphones output on your set. While the
headphones are connected, the sound from the built-in speakers will be disabled.

Sound function may be restricted when connecting headphones to the TV.

x

Headphone volume and TV volume are adjusted separately.

x

amplifier,

DVD home theatre

digital audio system

English

10

[7790_GER]BN68-02696K-00L04.indb 10 2010-03-26 오후 4:14:45

CONNECTIONS COMMON INTERFACE Slot

To watch paid channels, the “CI or CI+ CARD” must be inserted.

y If you don’t insert the “CI or CI+ CARD,” some channels will

display the message “Scrambled Signal”.

y The pairing information containing a telephone number, the “CI or

CI+ CARD” ID the Host ID and other information will be displayed
in about 2~3 minutes. If an error message is displayed, please
contact your service provider.

y When the configuration of channel information has finished, the

message “Updating Completed” is displayed, indicating the
channel list is updated.

✎

NOTE

You must obtain a “CI or CI+ CARD” from a local cable service provider.

x

When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may

x

cause damage to it.
Insert the “CI or CI+ CARD” in the direction marked on the card.

x

The location of the COMMON INTERFACE slot may be different depending on the model.

x

“CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer.

x

If you have any problems, please contact a service provider.

x

Insert the “CI or CI+ CARD” that supports the current antenna settings. The screen will be distorted or will not be

x

seen.
When you are watching the satellite TV, remove the “CI or CI+ CARD” of terrestrial and cable. The screen will be

x

distorted or will not be seen.

02 Connections

Changing the Input Source

Source List

Use to select TV or other external input
sources such as DVD / Blu-ray players
/ cable box / STB satellite receiver
connected to the TV.

■ TV / Ext. / PC / AV / Component

/ HDMI1/DVI / HDMI2 / HDMI3 /
HDMI4 / USB

✎

In the Source List, connected
inputs will be highlighted.

✎

Ext. and PC always stay activated.

SOURCE

Edit Name

■ VCR / DVD / Cable STB / Satellite STB / PVR STB /
AV Receiver / Game / Camcorder / PC / DVI PC /
DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA:

Name the device connected to the input jacks to make
your input source selection easier.

✎

When a PC with a resolution of 1920 x 1080 @
60Hz is connected to the HDMI IN 1(DVI) port,
you should set to DVI PC mode under Edit Name.

✎

When connecting an HDMI/DVI cable to the

HDMI IN 1(DVI) port, you should set to DVI PC or

DVI Devices mode under Edit Name.

English

11

[7790_GER]BN68-02696K-00L04.indb 11 2010-03-26 오후 4:14:46

Basic Features

P

OWER

SOURCE

O

N/OFF

CO

T

TTX/MIX

PRE-CH

GUIDE

CH LIS

T

MUTE

TOOLS

INFO

How to Navigate Menus

Before using the TV, follow the steps below to learn how to
navigate the menu and select and adjust different functions.

MENU

NTEN

1

2

RETURN

EXIT

1 ENTER / Direction button: Move the cursor and

select an item. Confirm the setting.

2 RETURN button: Returns to the previous menu.
3 MENU button: Displays the main on-screen menu.
4 EXIT button: Exits the on-screen menu.

How to Operate the OSD (On Screen Display)

The access step may differ depending on the selected menu.

1

MENU



The main menu options appear on
the screen:

Picture, Sound, Channel, Setup,
Input, Application, Support.

▲ / ▼ Select an icon with the ▲ or ▼

2
3
4
5

ENTER

▲ / ▼

◄ / ►



button.
Press ENTER to access the

sub-menu.
Select the desired submenu with

the ▲ or ▼ button.
Adjust the value of an item with the

◄ or ► button. The adjustment in
the OSD may differ depending on
the selected menu.

6

ENTER

EXIT





Press ENTER to complete the
configuration.

Press EXIT.

7

3

4

Using the INFO button (Now & Next guide)

The display identifies the current channel
and the status of certain audio-video
settings.

The Now & Next guide shows daily TV
programme information for each channel
according to the broadcasting time.

y Scroll ◄, ► to view information for a

desired programme while watching the
current channel.

y Scroll ▲, ▼ to view information for other channels. If you

want to move to the currently selected channel, press
the ENTER

DEF

DTV Air

15



button.

Unclass ified

No Det aild Inform ation

Life On Venus Avenu e

18:00 ~ 6:00

INFO

18:11 Thu 6 Jan

Watch

E

Information

Planning Your Viewing

Guide

The EPG (Electronic Programme Guide)
information is provided by broadcasters.
Using programme schedules provided
by broadcasters, you can specify
programmes you want to watch in
advance so that the channel automatically
changes to the selected programme
channel at the specified time. Programme
entries may appear blank or out of date depending on a
channel status.

Using Channel View

Guide

18:00 - 19:00 19:00 - 20:00

American Chopper

Programmes resume at 06:00
Home and...
No Information
QVC Selection
No Information

)

Family Affairs

800 five

Channel View - TV

Today

27

Discovery

28

DiscoveryH&L

800

five

24

price-drop.tv

16

QVC

6

R4DTT

DTV Air 800 five

Home and Away
18:00 - 18:30

Drama

Dani is devastated when scott makes clear his views on marriage...

View Mode +24 Hours Ch. Mode Information  Page

Tine Team

Fiv...

)

GUIDE

2:10 Tue 1 Jun

Dark Angel



Watch

English

12

[7790_GER]BN68-02696K-00L04.indb 12 2010-03-26 오후 4:14:48

1 2 3 4 5 6

Using Scheduled View

Guide

Family Affairs

)
)

Dark Angel

View Mode Information

1 4 6



800
800

button again and

DTV Air 800 five

Family Affairs
18:00 - 18:30

Drama

800 five

Scheduled View

18:30

Today

19:15

Today

1

Red (View Mode): View the list of programmes that

Tanya confesses all to a stunned Babs. Conrad is anxious to hear...

are playing now or coming up.

2

Yellow (+24 Hours): Viewing the list of programmes to

be broadcasted after 24 hours.

3

Blue (Ch. Mode): Select the type of channels you

want to display on the Channel View window.

– The Ch. Mode differs according to the antenna

source.

4 Information: Displays details of the selected

programme.

5



(Page): Move to next or previous page.

6 ENTER



button

– When selecting the current programme, you can

watch the selected programme.

– When selecting the future programme, you can

reserve to watch the selected programme. To cancel
the schedule, press the ENTER
select Cancel Schedules.

2:10 Tue 1 Jun

five
five



Cancel

■ Channels: Shows the channel list according to
channel type.



My Channels: Shows the group of the channel.

■

■

Satellite: Shows the channel list according to

satellite signal.

■

Scheduled: Shows all the currently reserved

programmes.

✎

Using the colour buttons with the Channel Manager

Red (Antenna): Toggle among Air, Cable or

x

Satellite.

Green (Zoom): Enlarges or shrinks a channel

x

number.

Yellow (Select): Select desired channels and press

x

the Yellow button to set all the selected channels at
the same time. The  mark appears to the left of
the selected channels.

Blue (Sort): Change the list ordered by channel

x

name or channel number.



(Page): Move to next or previous page.

x



(Tools): Displays the Channel Manager option

x

menu. (The options menus may differ depending on
the situation.)

Channel Status Display Icons

Icons Operations

An analogue channel.



A channel selected.



A channel set as a Favourite.



A programme currently being broadcast.



A locked channel.



A reserved programme.



03 Basic Features

Channel Manager

Delete or set favourites channels and use the programme
guide for digital broadcasts. Select a channel in the
Channels, My Channels, Satellite or Scheduled screen.

Channels

All

TV
Radio
Data/Other
Free
Scrambled
Searched

Satellite Antenna Zoom Select Sort  Page

c 1 1futech
2 * 24ore.tv

15 abc1

3 BBC World
23 bid-up.tv
33 Boonerang
32 Cartoon Nwk

5 Class News
4 Coming Soon
27 Discovery



Tools

Guide Type (Samsung / Guide Plus+)

(depending on the country)
You can select a different type of Guide.

■ Samsung: Uses the guide programme by provided
samsung.

■ Guide Plus+: Uses the guide programme provided by
Rovi International Solutions. For more information, refer
to “www.europe.guideplus.com.”

English

13

[7790_GER]BN68-02696K-00L04.indb 13 2010-03-26 오후 4:14:50

Basic Features

 Using Favourite Channels



My Channels

(in Channel Manager)
Shows all favourite channels.

■ Edit My Channels

channels to desired my channels group.

✎

The “” symbol will be displayed and the channel will
be set as a my channel.

1. Select a channel and press the TOOLS button.

2. Add or delete a channel in the my channel groups

you want among 1, 2, 3 and 4.

One or more groups can be selected.

x

3. After you have changed the settings, the channel list

for each group can be viewed in my channels.

Channels

Satellite Antenna Zoom Select Sort  Page



All

TV
Radio
Data/Other
Free
Scrambled
Searched

: You can set the selected

c 1 1futech
2 * 24ore.tv

15 abc1

Edit My Channels
Lock

3 BBC World

Timer Viewing

23 bid-up.tv

Timer Recording

33 Boonerang

Edit Channel Number

32 Cartoon Nwk

Delete

5 Class News
4 Coming Soon
27 Discovery





Tools

Channel List

You can see all the channels searched.

CH LIST

Channel Menu

 Returning Channels

Antenna (Air / Cable / Satellite)

Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the TV (i.e. an Air, Cable or Satellite system).

Country

The PIN input screen appears. Enter your 4 digit PIN number.

■ Digital Channel: Change the country for digital
channels.

■ Analogue Channel: Change the country for analogue
channels.

Auto Store

Scans for a channel automatically and stores in the TV.

✎

Automatically allocated programme numbers may not
correspond to actual or desired programme numbers. If
a channel is locked using the Child Lock function, the
PIN input window appears.

■ Antenna Source (Air / Cable / Satellite): Select the
antenna source to memorise.

When Antenna Source is set to Air or Cable:

■ Channel Source (Digital & Analogue / Digital /
Analogue): Select the channel source to memorise.

When selecting Cable → Digital & Analogue or Digital:
Provide a value to scan for cable channels.

Search Mode (Full / Network / Quick): Scans for all
channels with active broadcast stations and stores them
in the TV.

✎

If you select Quick, you can set up the Network,

Network ID, Frequency, Modulation, and
Symbol Rate manually by press the button on the

remote control.

Network (Auto / Manual): Selects the Network ID
setting mode among Auto or Manual.

Network ID: When Network is Manual, you can set up
Network ID using the numeric buttons.

Frequency: Displays the frequency for the channel.

(differs in each country)

Modulation: Displays available modulation values.
Symbol Rate: Displays available symbol rates.

English

14

[7790_GER]BN68-02696K-00L04.indb 14 2010-03-26 오후 4:14:52

When Antenna Source is set to Satellite:

■ Channel Type (All / TV / Radio): Select the Channel

type to memorise.

■ Satellite: Selects the satellite to scan.

■ Scan Mode (All Channels / Free Channels Only):

Selects the scanning mode of the selected satellite.

Manual Store

Scans for a channel manually and stores in the TV.

✎

If a channel is locked using the Child Lock function,
the PIN input window appears.

When Antenna Source is set to Air or Cable:

■ Digital Channel: When scanning has finished, channels

are updated in the channel list.

✎

When selecting Antenna → Air: Channel,

Frequency, Bandwidth

✎

When selecting Antenna → Cable: Frequency,

Modulation, Symbol Rate

■ Analogue Channel (Programme, Colour System,
Sound System, Channel, Search): If there is abnormal

sound or no sound, reselect the sound standard
required.

✎

Channel mode

P (programme mode): When tuning is complete,

x

the broadcasting stations in your area have been
assigned to position numbers from P0 to P99. You
can select a channel by entering the position number
in this mode.

C (aerial channel mode) / S (cable channel mode):

x

These two modes allow you to select a channel
by entering the assigned number for each aerial
broadcasting station or cable channel.

When Antenna Source is set to Satellite:

■ Satellite: Selects the satellite using the up/down
buttons.

■ Transponder: Selects the transponder using the up/
down buttons.

■ Scan Mode (All Channels / Free Channels Only):
Selects either free or all channels to store.

■ Network Search (Disable / Enable): Enable / Disable
network search using the up/down buttons.

■ Signal Quality: Display the current status of
broadcasting signal.

✎

Information on a satellite and its transponder is subject
to change depending on the broadcasting conditions.

✎

When setting is completed, move to Search and press
the ENTER button. Channel scan is started.

Satellite System Setup

The PIN input screen appears. Enter your 4 digit PIN number.

Satellite System Setup is available when Antenna is set to
Satellite. Before running Auto Store, set
Satellite System Setup. Then channel scan is run normally.

■ Satellite Selection: You can choose the satellites for

this TV.

■ LNB Power (Off / On): Enables or disables the power

supply for the LNB.

■ LNB Settings: Configures the outdoor equipment.

■ Satellite: Selects the satellite for receiving digital

broadcasts.
Transponder: Selects a transponder from the list or

adds a new transponder.
DiSEqC Mode: Selects DiSEqC mode for the selected

LNB.
Lower LNB Oscillators: Sets the LNB oscillators to a

lower frequency.
Upper LNB Oscillators: Sets the LNB oscillators to a

higher frequency.
Tone 22 kHz (Off / On / Auto): Selects the Tone 22

kHz depending on the LNB type. For a universal LNB it
should be Auto.

Signal Quality: Display the current status of
broadcasting signal.

■ Positioner Settings: Configures the antenna positioner.
Positioner (On / Off): Enables or disables the positioned

control.
Positioner Type (USALS / DiSEqC 1.2): Sets

the positioned type between DiSEqC 1.2 and
USALS(Universal Satellite Automatic Location System).

– My Longitude: Sets the longitude for my location.
– My Latitude: Sets the latitude for my location.
– Satellite Longitude Settings: Sets the longitude of

user defined satellites.

User Mode: Sets the position of satellite antenna
according to each satellite. If you store the current
position of satellite antenna according to a certain
satellite, when the signal of that satellite is needed,
the satellite antenna can be moved to pre-populated
position.

– Satellite: Selects the satellite to set the position for.
– Transponder: Selects a transponder from the list for

signal reception.

– Moving Mode: Selects the movement mode between

discrete and continuous movement.

– Step Size: Adjusts the step size degrees for the

antenna rotation. Step Size is available when Moving
Mode is set to Step.

03 Basic Features

English

15

[7790_GER]BN68-02696K-00L04.indb 15 2010-03-26 오후 4:14:52

Basic Features

– Go to Stored Position: Rotates the antenna to the

stored satellite position.

– Antenna Position: Adjusts and stores the antenna

position for the selected satellite.

– Store Current Position: Stores current position as

the selected positioner limit.

– Signal Quality: Display the current status of

broadcasting signal.

Installer Mode: Sets limits to the scope of movement
of satellite antenna or reset the position. Generally,
installation guide uses this function.

– Limit Position (East / West): Selects the direction of

the positioner Limit.

– Antenna Position: Adjusts and stores the antenna

position for the selected satellite.

– Store Current Position: Stores the current position

as the selected positioner Limit.

– Go to Zero: Moves the antenna to the reference

position.

– Reset Positioner Limit: Allows the antenna to rotate

over the full arc.

■ Reset All Setting (OK / Cancel): All satellite settings will

be reset to the initial values.

 Editing Channels

Channel Manager Option Menu
(in Channel Manager)

1. Select a channel and press the TOOLS button.

2. Edit the channel name or number using the
Edit Channel Name or Edit Channel Number menu.

■ Edit Channel Name (analogue channels only): Assign

your own channel name.

■ Edit Channel Number (digital channels only): Edit the

number by pressing the number buttons desired.

 Other Features

Cable Search Option

(depending on the country)
Sets additional search options such as the frequency and

symbol rate for a cable network search.

■ Freq.Start / Freq.Stop: Set the start or stop frequency

(differs in each country)

■ Symbol Rate: Displays available symbol rates.

■ Modulation: Displays available modulation values.

Channel Manager

Channel Manager Option Menu

Set each channel using the Channel Manager menu options
(Lock / Unlock, Timer Viewing, Timer Recording, Sort,
Reorder, Delete, Select All / Deselect All). Option menu
items may differ depending on the channel status.

1. Select a channel and press the TOOLS button.

2. Select a function and change its settings.

■ Lock / Unlock: Lock a channel so that the channel

cannot be selected and viewed.

✎

NOTE

This function is available only when the

x

Child Lock is set to On.
The PIN input screen appears. Enter your

x

4-digit PIN, the default of which is “0-0-0-0”.
Change the PIN using the Change PIN option.

■ Timer Viewing: You can set a desired channel to be

displayed automatically at the reserved time. Set the
current time first to use this function.

✎

When a digital channel is selected in
Channel Manager, press the ► button to view
the digital Programme.

■ Timer Recording (digital channels only): Allows you to

record a programme currently being broadcasted or
make a reservation to record a programme scheduled
for broadcast.

✎

A USB device with 4GB of memory or greater
must be connected to the TV.

✎

A USB storage device cannot record until it
completes the Device Performance Test.

✎

In case of USB-HDD, over 5400rpm

✎

In case of USB Stick, USB 2.0 and SLC Type.
(Minimum size of USB Stick is 2GB.)

■ Sort (analogue channels only): This operation allows

you to change the programme numbers of the stored
channels. This operation may be necessary after using
the auto store.

■ Reorder (when the Antenna was set to Satellite):

Rearrange the channel manager in numerical order.

■ Delete: You can delete a channel to display the channels

you want.

■ Select All / Deselect All: Select all the channels

or deselect all the selected channels in the channel
manager.

English

16

[7790_GER]BN68-02696K-00L04.indb 16 2010-03-26 오후 4:14:53

Scheduled

(in Channel Manager)
You can view, modify or delete a show you have reserved to

watch.

■ Change Info: Change a show you have reserved to

watch.

■ Cancel Schedules: Cancel a show you have reserved

to watch.

■ Information: Display a show you have reserved

to watch. (You can also change the reservation
information.)

■ Select All / Deselect All: Select or deselect all reserved

programmes.

 Adjusting Picture Settings

Cell Light / Contrast / Brightness /
Sharpness / Colour / Tint (G/R)

Your television has several setting options for picture quality
control.

✎

NOTE

In analogue TV, Ext., AV modes of the PAL system,

x

the Tint (G/R) function is not available.
In PC mode, you can only make changes to Cell

x

Light, Contrast and Brightness.
Settings can be adjusted and stored for each

x

external device connected to the TV.

03 Basic Features

Channel List Transfer

The PIN input screen appears. Enter your 4 digit PIN number.
Imports or exports the channel map. You should connect a
USB storage to use this function.

■ Import from USB: Import channel list from USB.

■ Export to USB: Export channel list to USB. this function

is available when USB is connected.

Fine Tune

(analogue channels only)
If the signal is weak or distorted, fine tune the channel

manually.

✎

Fine tuned channels are marked with an asterisk “*”.

✎

To reset the fine-tuning, select Reset.

Picture Menu

 Changing the Preset Picture Mode

Mode

Select your preferred picture type.



■ Dynamic: Suitable for a bright room.

■ Standard: Suitable for a normal environment.

■ Relax: Suitable for reducing eye strain.

✎

Relax is not available in PC mode.

■ Movie: Suitable for watching movies in a dark room.

 Economical Solutions

Eco Solution

■ Energy Saving (Off / Low / Medium / High /
Picture Off)

TV in order to reduce power consumption. If you select
Picture Off, the screen is turned off, but the sound
remains on. Press any button except volume button to
turn on the screen. Until the screen turns on again, a
distorted picture will be displayed for about 4 seconds.

■ Eco Sensor (Off / On): To enhance your power savings;
the picture settings will automatically adapt to the light
in the room.

Min Cell Light: When Eco sensor is On, the minimum
screen brightness can be adjusted manually.

■ No-Signal Power Off (Off / 15 min / 30 min / 60 min):
To avoid unnecessary energy consumption, set how long
you want the TV to remain on if it’s not receiving a signal.



✎

If you adjust the Cell Light, the Eco Sensor will
be set to Off.

✎

If Eco Sensor is On, the display brightness
may change (become slightly darker or brighter)
depending on the surrounding light intensity.

✎

Disabled when the PC is in power saving mode.

: Adjust the brightness of the

English

17

[7790_GER]BN68-02696K-00L04.indb 17 2010-03-26 오후 4:14:55

Basic Features

 Changing the Picture Options

Advanced Settings

(available in Standard / Movie mode)
You can adjust the detailed setting for the screen including

colour and contrast.

✎

In PC mode, you can only make changes to
Dynamic Contrast, Gamma and White Balance.

Advanced Settings

Black Tone : Off ►
Dynamic Contrast : Medium
Gamma : 0

Expert Pattern : Off

RGB Only Mode : Off
Colour Space : Native
White Balance
▼



Move



Enter



Return

■ Black Tone (Off / Dark / Darker / Darkest): Select the

black level to adjust the screen depth.

■ Dynamic Contrast (Off / Low / Medium / High): Adjust

the screen contrast.

■ Gamma: Adjust the primary colour intensity.

■ Expert Pattern (Off / Pattern1 / Pattern2): By running
the Expert Pattern function, the picture can be
calibrated without a generator or filter. If the OSD menu
disappears or a menu other than the Picture menu is
opened, the calibration is saved and the Expert Pattern
window disappears. Until the screen turns on again, a
distorted picture will be displayed for about 4 seconds.

✎

While the Expert Pattern is running, sound is not
outputted.

✎

Only enabled in DTV, Component and HDMI
modes.

■ RGB Only Mode (Off / Red / Green / Blue): You can
adjust Colour or Tint (G/R) of Red, Green or Blue for
the picture from an external device (DVD player, home
theatre, etc.).

■ Colour Space (Auto / Native / Custom): Adjust the

range of colours available to create the image. To adjust

Colour, Red, Green, Blue and Reset, set
Colour Space to Custom.

■ White Balance: Adjust the colour temperature for a

more natural picture.
R-Offset / G-Offset / B-Offset: Adjust each colour’s

(red, green, blue) darkness.
R-Gain / G-Gain / B-Gain : Adjust each colour’s (red,

green, blue) brightness.
Reset: Resets the White Balance to it’s default settings.

■ 10p White Balance (Off / On): Controls the white

balance in 10 point interval by adjusting the red, green,
and blue brightness.

✎

Available when the picture mode is set to Movie
and when the external input is set to HDMI or
Component.

✎

Some external devices may not support this
function.

Interval: Select interval to adjust.
Red: Adjust the red level.
Green: Adjust the green level.
Blue: Adjust the blue level.
Reset: Resets the 10p White Balance to its default

settings.

■ Flesh Tone: Emphasize pink “Flesh Tone.”

■ Edge Enhancement (Off / On): Emphasize object

boundaries.

■ xvYCC (Off / On): Setting the xvYCC mode on

increases detail and colour space when watching movies
from an external device (e.g. DVD player) connected to
the HDMI or Component IN jacks.

✎

Available when the picture mode is set to Movie
and when the external input is set to HDMI or
Component.

✎

Some external devices may not support this
function.

English

18

[7790_GER]BN68-02696K-00L04.indb 18 2010-03-26 오후 4:14:55

Picture Options

✎

In PC mode, you can only make changes to the
Colour Tone, Size and Screen Burn Protection.

Picture Options

Colour Tone : Normal ►
Size : Auto Wide
Screen Mode : 16:9
Digital Noise Filter : Auto
MPEG Noise Filter : Auto

HDMI Black Level : Normal

Film Mode : Off
▼



Move



Enter



■ Colour Tone (Cool / Normal / Warm1 / Warm2)

✎

Warm1 or Warm2 will be deactivated when the
picture mode is Dynamic.

✎

Settings can be adjusted and stored for each
external device connected to an input on the TV.

■ Size : Your cable box/satellite receiver
may have its own set of screen sizes as
well. However, we highly recommend you
use 16:9 mode most of the time.

Auto Wide: Automatically adjusts the
picture size to the 16:9 aspect ratio.

16:9 : Adjusts the picture size to 16:9 for
DVDs or wide broadcasting.

Wide Zoom: Magnifies the picture size more than 4:3.

✎

Adjusts the Position by using ▲, ▼ buttons.

Zoom: Magnifies the 16:9 wide pictures vertically to fit
the screen size.

✎

Adjusts the Position or Size by using ▲, ▼
button.

4:3 : The default setting for a movie or normal
broadcasting.

✎

Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and centre
of the screen may cause image retention(screen
burn) which are not covered by the warranty.

Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are inputted.

✎

NOTE

When Double (, ) mode has been set in PIP,

x

the Picture Size cannot be set.
Depending on the input source, the picture size

x

options may vary.
The available items may differ depending on the

x

selected mode.

P.SIZE

Return

In PC mode, only 16:9 and 4:3 modes can be

x

adjusted.
Settings can be adjusted and stored for each

x

external device connected to an input of the TV.
After selecting Screen Fit in HDMI (1080i / 1080p)

x

or Component (1080i / 1080p) mode: Adjusts the
Position or Size by using ▲, ▼, ◄, ► button.

If you use the Screen Fit function with HDMI 720p

x

input, 1 line will be cut at the top, bottom, left and
right as in the overscan function.

■ Screen Mode (16:9 / Wide Zoom / Zoom / 4:3):
Available only when picture size is set to Auto Wide. You
can determine the desired picture size at the 4:3 WSS
(Wide Screen Service) size or the original size. Each
European country requires different picture size.

✎

Not available in PC, Component or HDMI mode.

■ Digital Noise Filter (Off / Low / Medium / High / Auto
/ Auto Visualisation): When the broadcast signal is
weak, some static and ghosting may appear. Select one
of the options until the best picture is displayed.

Auto Visualisation: When changing analogue channels,
displays the intensity of the current signal and defines
the screen noise filter.

✎

Only available for analogue channels.

■ MPEG Noise Filter (Off / Low / Medium / High /
Auto): Reduces MPEG noise to provide improved
picture quality.

■ HDMI Black Level (Normal / Low): Selects the black
level on the screen to adjust the screen depth.

✎

Available only in HDMI mode (RGB signals).

■ Film Mode (Off / Auto1 / Auto2 / Cinema Smooth):
Sets the TV to automatically sense and process film
signals from all sources and adjust the picture for
optimum quality.

✎

An 1080p 24Hz HDMI signal must be input to use
the Cinema Smooth function.

✎

Available in TV, AV, COMPONENT (480i / 1080i)
and HDMI (480i / 1080i).

■ Motion Judder Canceller (Off / Standard / Smooth /
Demo): Removes drag from fast scenes with a lot of
movement to provide a clearer picture.

✎

If Motion Judder Canceller is Demo, you can
compare the difference of on and off modes.

03 Basic Features

English

19

[7790_GER]BN68-02696K-00L04.indb 19 2010-03-26 오후 4:14:56

Basic Features

■ Screen Burn Protection: To reduce the possibility of

screen burn, this unit is equipped with screen burn
prevention technology. The Time setting allows you to
Programme the time between movement of the picture
in minutes.

Pixel Shift (Off / On): Using this function, you can
minutely move pixels on the PDP in horizontal or vertical
direction to minimize after images on the screen.

✎

Optimum condition for pixel shift

Item

Horizontal 0~4 4

Vertical 0~4 4

Time (minute) 1~4 min 4 min

✎

The Pixel Shift value may differ depending on the
monitor size (inches) and mode.

✎

This function is not available in the Screen Fit
mode.

Auto Protection Time (10 min / 20 min / 40 min /
1 hour / Off): If the screen remains idle with a still image

for a certain period of time defined by the user, the
screen saver is activated to prevent the formation of
ghost images on the screen.

Scrolling: This function removes after-images on the
screen by moving all the pixels on the PDP according
to a pattern. Use this function when there are remaining
after images or symbols on the screen especially when
you displayed a still image on the screen for a long time.

✎

The after-image removal function has to be
executed for a long time (approximately 1 hour)
to effectively remove after-images on the screen.
If the after-image is not removed after performing
the function, repeat the function again.

✎

Press any key on the remote control to cancel this
feature.

Side Grey (Light / Dark): When you watch TV with the
screen ratio of 4:3, the screen is prevented from any
damage by adjusting the white balance on both extreme
left and right sides.

TV/AV/Component/

HDMI/PC

 Viewing TV using the 3D function

IMPORTANT SAFETY INFORMATION. READ THE
FOLLOWING WARNINGS BEFORE YOU OR YOUR
CHILD USE THE 3D FUNCTION

WARNING



Parents’ careful supervision is required particularly

x

when children or teenagers view 3D images.
Photosensitive Seizure Warning and Other Health

x

Risks

– Some viewers may experience an epileptic seizure

or stroke when exposed to certain flashing images
or lights contained in certain television pictures or
video games. If you or any of your relatives has a
history of epilepsy or strokes, please consult with a
medical specialist before using the 3D function.

English

20

– Do not watch 3D pictures when you feel

incoherent, sleepy, tired or sick. Avoid watching 3D
pictures for long hours.

– Even those without a personal or family history

of epilepsy or stroke may have an undiagnosed
condition that can cause “photosensitive epileptic
seizures.”

– If you experience any of the following symptoms

immediately stop watching 3D pictures and
consult a medical specialist: (1) altered vision; (2)

lightheadedness; (3) dizziness; (4) involuntary
movements such as eye or muscle twitching;
(5) confusion; (6) nausea; (7) loss of awareness;
(8) convulsions; (9) cramps; and/or (10)
disorientation. Parents should monitor and ask

their children about the above symptoms-children
and teenagers may be more likely than adults to
experience these symptoms.

Note that watching TV while sitting too close to the

x

screen for an extended period of time may weaken
your eyesight.

Note that watching TV while wearing 3D Active

x

Glasses for an extended period of time may cause a
headache or fatigue. If you feel headache, fatigue or
dizziness, stop watching TV and rest.

Some 3D pictures may startle viewers. The pregnant,

x

elderly, epileptic and those suffering from serious
physical conditions are advised to avoid utilizing the
unit’s 3D functionality.

We don’t recommend 3D pictures to those who are

x

in bad physical condition, who are sleep-deprived or
who drank liquor.

Please take care to be aware of the world around

x

you. This product is designed to be immersive. DO
NOT use this product near open stairwells, cables,
balconies, or other objects that can be tripped over,
run into, knocked down, broken or fallen over. Being
startled or deluding yourself into thinking that the 3D
images are real may cause you to crush a nearby
object or get injured trying to move your body.

Do not use the 3D Active Glasses for any other

x

purpose than for which it was designed. Wearing the
with an HDMI/DVI for any other purpose (as general
spectacles, sunglasses, protective goggles, etc.)
may physically harm you or weaken your eyesight.

Immersive video can potentially have adverse effects

x

on the user including motion sickness, perceptual
after effects, disorientation, eye strain, and
decreased postural stability. Take frequent breaks to
lessen the potential of these effects, as is commonly
suggested for other items, such as keyboards and
computer monitors, that you may tend to fixate or
concentrate on. If your eyes show signs of fatigue or
dryness or if you have any of the above symptoms,
immediately discontinue use of this device and do
not resume using it for at least thirty minutes after
the symptoms have subsided.

The ideal viewing distance should be three times

x

or more the height of the screen. We recommend
sitting with viewer’s eyes on a level with the screen.

[7790_GER]BN68-02696K-00L04.indb 20 2010-03-26 오후 4:14:57

3D

This exciting new feature enables you to
view 3D content. In order to fully enjoy
this feature, you must purchase a pair
of Samsung 3D Active Glasses (SSG­2100AB, SSG-2200AR, SSG-2200KR) to
view 3D video.

Samsung 3D Active Glasses are sold
separately. For more detailed purchasing
information, contact the retailer where you purchased this TV.

3D emitter

✎

The LED on the 3D emitter blinks only when sending a
3D signal.

✎

If there is any obstacle between the emitter and 3D
Active Glasses, the proper 3D effect may not be
obtained.

■ 3D Mode: Select the 3D input format.

✎

If you want to feel the 3D effect fully, please wear
the 3D Active Glasses first, and then select
3D Mode from the list below that provides the
best 3D viewing experience.

✎

When watching 3D images, turn on 3D Active
Glasses.

3D Mode Operation
Off Turns the 3D function off.

2D → 3D

Side by Side

Top & Bottom

Line by Line

Vertical Stripe

Checker
Board

Frequency

Changes a 2D image to 3D.
Displays two images next to

each other.
Displays one image above

another.
Displays the images for the left

and right eye alternately in rows.
Displays the images for the

left and right eye alternately in
columns.

Displays the images for the
left and right eye alternately in
pixels.

Displays the images for the
left and right eye alternately in
frames.

3D

✎

“Side by Side” and “Top & Bottom” are available
when the resolution is 720p, 1080i and 1080p
in DTV, HDMI and USB mode or set to PC
connecting through HDMI/DVI cable.

✎

“Vertical Strip”, “Line by Line” and “Checker
Board” are available when the resolution is set to
PC connecting through HDMI/DVI cable.

✎

“Frequency” displays the frequency (60Hz only)
when the resolution is set to PC.

■ 3D → 2D (Off / On): Displays the image for the left eye
only.

✎

This function is deactivated when 3D Mode set to
“2D → 3D” or Off.

■ Depth: Adjusts focus / depth in “2D → 3D” mode.

✎

This function is only activated when the 3D Mode
is “2D → 3D”.

■ Picture Correction: Adjusts the images for the left and
right eye.

■ 3D Auto View (Off / On): If 3D Auto View is set to On,
a “Side-By-Side” format HDMI signal with one of the
resolutions below is automatically switched to 3D. Here,
correct 3D information must be sent from the HDMI 1.3
transmitter.

✎

If a 3D failure occurs due to a 3D information error,
set 3D Auto View to Off and manually select a
3D Mode using the 3D button or corresponding
menu.

✎

Support resolution (16:9 only)

Resolution Frequency (Hz)

1280 x 720p 50 / 60 Hz

1920 x 1080i 50 / 60 Hz

1920 x 1080p 24 / 30 / 50 / 60 Hz

Resolution supported for HDMI PC mode

The resolution for HDMI PC mode is optimized to 1920 x
1080 input.

An input resolution other than 1920 x 1080 may not be
displayed properly in 3D display or full screen mode.

03 Basic Features

English

21

[7790_GER]BN68-02696K-00L04.indb 21 2010-03-26 오후 4:14:59

Basic Features

How to watch the 3D image

3D

To watch in 3D, wear 3D Glasses and
press the power button on the glasses.
Viewing 3D TV motion pictures for long
periods may cause eye fatigue and/or
dizziness.

OK

Cancel



Move



Enter



Exit

3D3D

Using the LEFT / RIGHT keys on the remote control,

Using the LEFT / RIGHT keys on the remote control,
select the icon suitable for the picture on screen.

select the icon suitable for the picture on screen.



Move



Enter





Move



1. Press the CONTENT button, then the Content View

menu will appear.

2. Press the ◄ or ► button, then select 3D.

To watch in 3D, wear 3D Active Glasses and press the
power button on the glasses.

3. Select OK, then press the ENTER

4. Using the ◄ or ► buttons on your remote control,

selects the 3D Mode of the image you want to view.

✎

Some 3D modes may not be available depending
on the format of the image source.

Supported formats and operating specifications for
HDMI 1.4

Source signal format Standard HDMI 1.4 3D

1920x1080p@24Hz x 2 1920x2205p@24Hz
1280x720p@60Hz x 2 1280x1470p@60Hz
1280x720p@50Hz x 2 1280x1470p@50Hz

The mode is automatically switched to 3D mode for the 3D
video input in one of the formats above.

For the HDMI 1.4@24Hz format, the TV is optimized as
follows:

– Judder Reduction Display Mode: When Motion

Judder Canceller is set to Smooth, you can watch a
smooth picture without judder.



Enter



button.

Exit

Exit

Before using 3D function...

✎

NOTE

You may notice a small amount of screen flickering

x

when watching 3D images in poor light conditions
(from a strobe light, etc.), or under a fluorescent lamp
(50Hz ~ 60Hz) or 3 wavelength lamp. If so, dim the
light or turn the lamp off.

3D mode is automatically disabled in following cases:

x

when changing a channel or the input source, or
accessing Media Play or Internet@TV.

Some Picture functions are disabled in 3D mode.

x

PIP and data broadcast is not supported in 3D

x

mode.
Data broadcasts (MHEG / MHP) are not supported

x

in 3D mode.
3D Active Glasses from other manufacturers may not

x

be supported.
If there is any other 3D product, electronic

x

devices such as a PDP or LCD TV, or wireless
communication devices nearby, the 3D Active
Glasses may not work properly due to mutual
interference. If there is a problem, keep other
electronic devices as far away as possible from the
3D Active Glasses.

When watching pictures from a 50Hz 3D source with

x

its Game mode On, visually-sensitive viewers may
see some flicker on bright images.

Photos of Media Play are shown in “2D → 3D”

x

mode only.
If lying on your side, the 3D-effects may not be

x

displayed.
Be sure to stay within the viewing angle and optimum

x

TV viewing distance when watching 3D pictures.

– Otherwise, you may not be able to enjoy proper 3D

effects.

English

22

[7790_GER]BN68-02696K-00L04.indb 22 2010-03-26 오후 4:15:00

Picture Reset (OK / Cancel)

Resets your current picture mode to its default settings.

 Setting up the TV with Your PC

Sound Menu

03 Basic Features

 Changing the Preset Sound Mode

Set the input source to PC.

Auto Adjustment

Adjust frequency values/positions and fine tune the settings
automatically.

✎

Not available when connecting through HDMI/DVI
cable.



Screen

■ Coarse / Fine: Removes or reduces picture noise. If the

noise is not removed by Fine-tuning alone, then adjust
the frequency as best as possible (Coarse) and Fine­tune again. After the noise has been reduced, readjust
the picture so that it is aligned to the centre of screen.

■ Position: Adjust the PC screen position with direction

button (▲ / ▼ / ◄ / ►).

■ Image Reset: Resets the image to default settings.

Using Your TV as a Computer (PC) Display

Setting Up Your PC Software (Based on Windows XP)
Depending on the version of Windows and the video card,

the actual screens on your PC may differ in which case the
same basic set-up information will almost always be applied.
(If not, contact your computer manufacturer or Samsung
Dealer.)

1. Click on “Control Panel” on the Windows start menu.

2. Click on “Appearance and Themes” in the “Control

Panel” window and a display dialog-box will appear.

3. Click on “Display” and a display dialog box will appear.

4. Navigate to the “Settings” tab on the display dialog-box.

y The correct size setting (resolution) [Optimum: 1920 X

1080 pixels]

y If a vertical-frequency option exists on your display

settings dialog box, the correct value is “60” or “60 Hz”.
Otherwise, just click “OK” and exit the dialog box.

SRS TheaterSound

■ Standard: Selects the normal sound mode.

■ Music: Emphasizes music over voices.

■ Movie: Provides the best sound for movies.

■ Clear Voice: Emphasizes voices over other sounds.

■ Amplify: Increase the intensity of high-frequency sound
to allow a better listening experience for the hearing
impaired.



 Adjusting Sound Settings

Equalizer

Adjusts the sound mode (standard sound mode only).

■ Balance L/R: Adjusts the balance between the right and
left speaker.

■ 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth
Adjustment): Adjusts the level of specific bandwidth
frequencies.

■ Reset: Resets the equalizer to its default settings.

 Sound Systems, Etc.

SRS TruSurround HD (Off / On)

(standard sound mode only)
This function provides a virtual 5.1 channel surround sound

experience through a pair of speakers using HRTF (Head
Related Transfer Function) technology.



SRS TruDialog (Off / On)

(standard sound mode only)
This function allows you to increase the intensity of a voice

over background music or sound effects so that dialog can
be heard more clearly.

English

23

[7790_GER]BN68-02696K-00L04.indb 23 2010-03-26 오후 4:15:00

Basic Features

Audio Language

(digital channels only)
Change the default value for audio languages.

✎

The available language may differ depending on the
broadcast.

Audio Format

(digital channels only)
When sound is emitted from both the main speaker and the

audio receiver, a sound echo may occur due to the decoding
speed difference between the main speaker and the audio
receiver. In this case, use the TV Speaker function.

✎

Audio Format option may differ depending on the
broadcast. 5.1ch Dolby digital sound is only available
when connecting an external speaker through an
optical cable.

Audio Description

(not available in all locations) (digital
channels only)

This function handles the Audio Stream
for the AD (Audio Description) which is
sent along with the Main audio from the
broadcaster.

■ Audio Description (Off / On): Turn

the audio description function on or
off.

■ Volume: Adjust the audio description volume.

AD

Auto Volume (Off / Normal / Night)

To equalize the volume level on each channel, set to Normal.

■ Night: This mode provides an improved sound
experience compared to Normal mode, making almost
no noise. It is useful at night.

Speaker Select (External Speaker /
TV Speaker)

A sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver. In
this case, set the TV to External Speaker.

✎

When Speaker Select is set to External Speaker, the
volume and MUTE buttons will not operate and the
sound settings will be limited.

✎

When Speaker Select is set to External Speaker

TV Speaker: Off, External Speaker: On

x

✎

When Speaker Select is set to TV Speaker

TV Speaker: On, External Speaker: On

x

✎

If there is no video signal, both speakers will be mute.

Additional Setting

(digital channels only)

■ DTV Audio Level (MPEG / HE-AAC): This function

allows you to reduce the disparity of a voice signal
(which is one of the signals received during a digital TV
broadcast) to a desired level.

✎

According to the type of broadcast signal, MPEG
/ HE-AAC can be adjusted between -10dB and
0dB.

✎

To increase or decrease the volume, adjust
between the range 0 and -10 respectively.

■ SPDIF Output: SPDIF (Sony Philips Digital InterFace)

is used to provide digital sound, reducing interference
going to speakers and various digital devices such as a
DVD player.

Audio Format: During the reception of a digital TV
broadcast, you can select the Digital Audio output
(SPDIF) format from the options PCM or Dolby Digital.

✎

By connecting to 5.1ch speakers in a Dolby
Digital setup, maximize your interactive 3D sound
experience.

Audio Delay: Correct audio-video sync problems, when
watching TV or video, and when listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).

■ Dolby Digital Comp (Line / RF): This function minimizes

signal disparity between a dolby digital signal and a
voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound).

✎

Select Line to obtain dynamic sound, and RF
to reduce the difference between loud and soft
sounds at night time.

Line: Set the output level for signals greater or less than

-31dB (reference) to either -20dB or -31dB.
RF: Set the output level for signals greater or less than

-20dB (reference) to either -10dB or -20dB.

English

24

[7790_GER]BN68-02696K-00L04.indb 24 2010-03-26 오후 4:15:01

Sound Reset (OK / Cancel)

Reset all sound settings to the factory defaults.



↔ Dual









Default

Automatic

change

Dual 

Automatic

change

Dual

 Selecting the Sound Mode

When you set to Dual -, the current sound mode is
displayed on the screen.

Audio

Type

A2

Stereo

NICAM

Stereo

✎

If the stereo signal is weak and an automatic switching
occurs, then switch to the mono.

✎

Only activated in stereo sound signal.

✎

Only available when the Input source is set to TV.

Mono Mono

Stereo

Dual

Mono Mono

Stereo

Dual

Dual -

Stereo ↔ Mono

Dual

Mono ↔ Stereo
Mono ↔ Dual

 Dual  

Setup Menu

 Setting the Time

Time

■ Clock: Setting the clock is for using various timer
features of the TV.



The current time will appear every time you press
the INFO button.

✎

If you disconnect the power cord, you have to set
the clock again.

Clock Mode (Auto / Manual)

✎

Depending on the broadcast station and signal,
the auto time set up may not be correct. In this
case, set the time manually.

✎

The antenna must be connected in order to set
the time automatically.

Clock Set: Set the Day, Month, Year, Hour and Minute
manually.

✎

Available only when Clock Mode is set to

Manual.

Time Zone (depending on the country): Select your time

zone.

✎

When Country is set to Others, you can use this
function.

✎

This function is only available when the

Clock Mode is set to Auto.

 Using the Sleep Timer

■ Sleep Timer

after a preset period of time. (30, 60, 90, 120, 150 and
180 minutes).

✎



To cancel Sleep Timer, select Off.

: Automatically shuts off the TV

03 Basic Features

 Setting the On / Off Timer

■ Timer 1 / Timer 2 / Timer 3: Three different on / off

timer settings can be made. You must set the clock first.

On Time

▲

Inactivate

▼

Off Time



Inactivate

Volume

10 TV ATV 1

Repeat

Once

On Time / Off Time: Set the hour, minute, and activate
/ inactivate. (To activate timer with the setting you’ve
chosen, set to Activate.)

Volume: Set the desired volume level.
Source: Select TV or USB content to be played when

the TV is turned on automatically. (USB can be selected
only when a USB device is connected to the TV)

Antenna (when the Source is set to TV): Select ATV or
DTV.

Channel (when the Source is set to TV): Select the

desired channel.
Contents (when the Source is set to USB): Select a

folder in the USB device containing music or photo files
to be played when the TV is turned on automatically.

✎

NOTE

If there is no music file on the USB device or the

x

folder containing a music file is not selected, the
Timer function does not operate correctly.

When there is only one photo file in the USB

x

device, the Slide Show will not play.
If a folder name is too long, the folder cannot be

x

selected.
Each USB you use is assigned its own folder.

x

When using more than one of the same type of
USB, make sure the folders assigned to each
USB have different names.

Timer 1

00 00

00 00

Source Antenna Channel

Sun Mon Tue Wed Thu Fri Sat



Move



Adjust



Enter



Return

English

25

[7790_GER]BN68-02696K-00L04.indb 25 2010-03-26 오후 4:15:02

Basic Features

Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat,
Sat~Sun or Manual to set at you convenience. If you

select Manual, you can set up the day you want to
activate the timer.

✎

The  mark indicates the day is selected.

✎

Auto Power Off (available only when the TV is turned on
by Timer): The TV will be automatically turned off after 3
hours of being left idle to prevent overheating.

 Locking Programmes

Security

✎

The PIN input screen appears before the setup screen.

✎

Enter your 4-digit PIN, the default of which is “0-0-0-0”.
Change the PIN using the Change PIN option.

■ Child Lock (Off / On): Lock channels in Channel
Manager, to prevent unauthorized users, such as
children, from watching unsuitable programme.

✎

Available only when the Input source is set to TV.

■ Parental Lock (depending on the country): Prevent
unauthorized users, such as children, from watching
unsuitable programme with a user-defined 4-digit PIN
code. If selected channel is locked, the “
be displayed.

Allow All: Unlock All TV ratings (Not supported in
France).

✎

When Parental Lock is set to 18, the PIN input
screen appears before changing the channels
(France only).

■ Change PIN: Change your personal ID number required
to set up the TV.

✎

If you forget the PIN code, press the remote
control buttons in the following sequence, which
resets the PIN to “0-0-0-0”: POWER (off) →

MUTE → 8 → 2 → 4 → POWER (on).



” symbol will

 Other Features

Language

■ Menu Language: Set the menu language.

■ Teletext Language: Set a desired language for teletext.

✎

English is the default in cases where the selected
language is unavailable in the broadcast.

■ Preference (Primary Audio Language /

Secondary Audio Language / Primary Subtitle
Language / Secondary Subtitle Language /
Primary Teletext Language / Secondary Teletext
Language): Select a language, which will be the default

language when a channel is selected.

Subtitle

Use this menu to set the Subtitle mode.

■ Subtitle (Off / On): Switches subtitles

on or off.

■ Mode (Normal / Hearing Impaired):

Sets the subtitle mode.

■ Subtitle Language: Sets the subtitle

language.

✎

If the programme you are watching does not
support the Hearing Impaired function, Normal
automatically activates even if the
Hearing Impaired mode is selected.

✎

English is the default in cases where the selected
language is unavailable in the broadcast.

SUBT.

Digital Text (Disable / Enable)

(UK only)
If the programme broadcasts with digital text, this feature is

enabled.

Network (Network Type / Network Setup
/ Network Test / SWL(Samsung Wireless
Link) / SWL connect)

For details on set up options, refer to the “Network
Connection” instructions (p. 30).

General

■ Game Mode (Off / On): When connecting to a game

console such as PlayStation™ or Xbox™, you can enjoy
a more realistic gaming experience by selecting game
mode.

✎

NOTE

Precautions and limitations for game mode

x

– To disconnect the game console and connect

another external device, set Game Mode to Off in
the setup menu.

– If you display the TV menu in Game Mode, the

screen shakes slightly.

Game Mode is not available when the input source

x

is set to TV or PC.
After connecting the game console, set Game Mode

x

to On. Unfortunately, you may notice reduced picture
quality.

If Game Mode is On:

x

– Picture mode is set to Standard and Sound mode

is set to Movie.

– Equalizer is not available.

English

26

[7790_GER]BN68-02696K-00L04.indb 26 2010-03-26 오후 4:15:03

■ BD Wise (Off / On): Provides the optimal picture quality
for Samsung DVD, Blu-ray and Home Theatre products
which support BD Wise. When BD Wise is turned On,
the picture mode is automatically changed to the optimal
resolution.

✎

Available when connecting Samsung products
that support BD Wise through a HDMI cable.

■ Menu Transparency (Bright / Dark): Set the
Transparency of the menu.

■ Melody (Off / Low / Medium / High): Set so that a
melody plays when the TV is turned on or off.

✎

Melody is disabled when FastStart is On.

■ FastStart (Off / On): When the TV is powered on, the
screen will come on quickly with this feature.

Common Interface

■ CI Menu: This enables the user to select from the CAM-
provided menu. Select the CI Menu based on the menu
PC Card.

■ Application Info: View information on the CAM inserted
into the CI slot and on the “CI or CI+ CARD” which is
inserted into the CAM. You can install the CAM anytime
whether the TV is on or off.

1. Purchase a CI CAM module at your nearest dealer or by

phone.

2. Firmly insert the “CI or CI+ CARD” into the CAM in the

direction of the arrow.

3. Insert the CAM with the “CI or CI+ CARD” into the

common interface slot, in the direction of the arrow so
that it aligns parallel with the slot.

4. Check if you can see a picture on a scrambled signal

channel.

Wireless Remote Control

Turn wireless remote controls on or off or give permission to
wireless remote controls.

 Picture In Picture (PIP)



PIP

You can watch the TV tuner and one external video source
simultaneously. PIP (Picture-in-Picture) does not function in
the same mode.

✎

NOTE

For PIP sound, refer to the Sound Select

x

instructions.
If you turn the TV off while watching in PIP mode, the

x

PIP window will disappear.
You may notice that the picture in the PIP window

x

becomes slightly unnatural when you use the main
screen to view a game or karaoke.

While Internet@TV is in operation, the PIP function

x

cannot be used.
PIP settings

x

Main picture Sub picture
Component, HDMI1/DVI,

HDMI2, HDMI3, HDMI4, PCTV

■ PIP (Off / On): Activate or deactivate the PIP function.

■ Channel: Select the channel for the sub-screen.



■ Size (

picture.

■ Position (

sub-picture.

■ Sound Select (Main / Sub): You can choose the
desired sound (Main / Sub) in PIP mode.

/  /  / ): Select a size for the sub-



/  /  / ): Select a position for the

✎

In Double (, ) mode, Position cannot be
selected.

03 Basic Features

English

27

[7790_GER]BN68-02696K-00L04.indb 27 2010-03-26 오후 4:15:03

Basic Features

Support Menu

Self Diagnosis

✎

Self Diagnostic might take few seconds, this is part of
the normal operation of the TV.

■ Picture Test (Yes / No): Use to check for picture

problems.

■ Sound Test (Yes / No): Use the built-in melody sound to

check for sound problems.

✎

If you hear no sound from the TV’s speakers,
before performing the sound test, make sure

Speaker Select is set to TV Speaker in the
Sound menu.

✎

The melody will be heard during the test even if
Speaker Select is set to External Speaker or the
sound is muted by pressing the MUTE button.

■ Signal Information: (digital channels only) HDTV

channel’s reception quality is either perfect or the
channels are unavailable. Adjust your antenna to
increase signal strength.

■ Troubleshooting: If the TV seems to have a problem,

refer to this description.

✎

If none of these troubleshooting tips apply, contact
the Samsung customer service centre.

Software Upgrade

Software Upgrade can be performed via a broadcasting

signal or by network connection or downloading the latest
firmware from “www.samsung.com,” to a USB memory
device.

Current Version the software already installed in the TV.

✎

Software is represented as “Year/Month/Day_Version”.

Software Upgrade

Current Version 2010/01/18_000001

By USB ►
By Online
By Channel
Standby Mode Upgrade : 2 Hours Later

Alternative Software 2010/01/15_00000



Move



Enter



Return

Installing the Latest Version

■ By USB: Insert a USB
drive containing the
firmware upgrade file,
downloaded from
“www.samsung.com,”
into the TV. Please
be careful not to
disconnect the power
or remove the USB
drive until upgrades are complete. The TV will be turned
off and on automatically after completing the firmware
upgrade. When software is upgraded, video and audio
settings you have made will return to their default
settings. We advise you to to write down your settings
so that you can easily reset them after the upgrade.

■ By Online: Upgrade the software using the Internet.

✎

First, configure your network. For detailed
procedures on using the Network Setup, refer to
the “Network Connection” instructions.

✎

If the internet connection doesn’t operate properly,
the connection may be broken. Please retry
downloading. If the problem persists, download by
USB and upgrade.

■ By Channel: Upgrade the software using the
broadcasting signal.

✎

If the function is selected during the software
transmission period, software will be automatically
searched and downloaded.

✎

The time required to download the software is
determined by the signal status.

■ Standby Mode Upgrade: A manual upgrade will be
automatically performed at selected time. Since the
power of the unit is turned on internally, the screen
may be turned on slightly for the PDP product. This
phenomenon may continue for more than 1 hour until
the software upgrade is complete.

■ Alternative Software (backup): Displays the software
version downloaded through By Online. During the
software upgrading, When the Upgrade will discontinue
from last step, this function be activated.

TV Rear Panel

or

(HDD)

USB Drive

HD Connection Guide

Refer to this information when connecting external devices
to the TV.

Contact Samsung

View this information when your TV does not work properly
or when you want to upgrade the software. You can find
information regarding our call centres, and how to download
products and software.

English

28

[7790_GER]BN68-02696K-00L04.indb 28 2010-03-26 오후 4:15:04

Advanced Features

Using an HDMI/DVI Cable / a D-sub Cable

Display Modes (D-Sub and HDMI/DVI Input)

Optimal resolution is 1920 X 1080 @ 60 Hz.

Mode Resolution

IBM

MAC

VESA CVT

VESA DMT

VESA GTF

VESA DMT / DTV CEA

640 x 350
720 x 400

640 x 480
832 x 624

1152 x 870

720 x 576
1152 x 864
1280 x 720
1280 x 960

640 x 480

640 x 480

640 x 480

800 x 600

800 x 600

800 x 600
1024 x 768
1024 x 768
1024 x 768
1152 x 864

1280 x 1024
1280 x 1024

1280 x 720
1280 x 800
1280 x 800
1280 x 960
1360 x 768
1440 x 900
1440 x 900

1600 x 1200
1680 x 1050

1280 x 720

1280 x 1024

1920 x 1080p 67.500 60.000 148.500 +/+

Horizontal Frequency

(KHz)

31.469

31.469

35.000

49.726

68.681

35.910

53.783

56.456

75.231

31.469

37.861

37.500

37.879

48.077

46.875

48.363

56.476

60.023

67.500

63.981

79.976

45.000

49.702

62.795

60.000

47.712

55.935

70.635

75.000

65.290

52.500

74.620

Connecting to a PC

Vertical Frequency

(Hz)

70.086

70.087

66.667

74.551

75.062

59.950

59.959

74.777

74.857

59.940

72.809

75.000

60.317

72.188

75.000

60.004

70.069

75.029

75.000

60.020

75.025

60.000

59.810

74.934

60.000

60.015

59.887

74.984

60.000

59.954

70.000

70.000

DVI OUT

AUDIO OUT

Pixel Clock Frequency

(MHz)

25.175

28.322

30.240

57.284

100.000

32.750

81.750

95.750

130.000

25.175

31.500

31.500

40.000

50.000

49.500

65.000

75.000

78.750

108.000

108.000

135.000

74.250

83.500

106.500

108.000

85.500

106.500

136.750

162.000

146.250

89.040

128.943

04 Advanced Features

Sync Polarity

(H / V)

+/-

-/+

-/-

-/-

-/-

-/+

-/+

-/+

-/+

-/-

-/-

-/­+/+
+/+
+/+

-/-

-/­+/+
+/+
+/+
+/+
+/+

-/+

-/+
+/+
+/+

-/+

-/+
+/+

-/+

-/+

-/-

✎

NOTE

For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.

x

The interlace mode is not supported.

x

The set might operate abnormally if a non-standard video format is selected.

x

Separate and Composite modes are supported. SOG(Sync On Green) is not supported.

x

English

29

[7790_GER]BN68-02696K-00L04.indb 29 2010-03-26 오후 4:15:08

Advanced Features

ANT 2 IN

(

SATELLITE

)

ANT 1 IN

(

AIR/CABLE

)

(

SATELLITE

)

(

AIR/CABLE

)

ANT 2 IN

(

SATELLITE

)

ANT 1 IN

(

AIR/CABLE

)

(

SATELLITE

)

(

AIR/CABLE

)

ANT 2 IN

(

SATELLITE

)

ANT 1 IN

(

AIR/CABLE

)

ANT 2 IN

(

SATELLITE

)

ANT 1 IN

(

AIR/CABLE

)

ANT 2 IN

(

SATELLITE

)

ANT 1 IN

(

AIR/CABLE

)

(

SATELLITE

)

(

AIR/CABLE

)

ANT 2 IN

(

SATELLITE

)

ANT 1 IN

(

AIR/CABLE

)

ANT 2 IN

(

SATELLITE

)

ANT 1 IN

(

AIR/CABLE

)

ANT 2 IN

(

SATELLITE

)

ANT 1 IN

(

AIR/CABLE

)

ANT 2 IN

(

SATELLITE

)

ANT 1 IN

(

AIR/CABLE

)

Network Connection

You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or wireless
connection.

 Connecting to a Wired Network

You can attach your TV to your LAN using cable in three ways:

y You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a Cat

5 cable. See the diagram below.

The Modem Port on the Wall

External Modem

(ADSL / VDSL / Cable TV)

TV Rear Panel

Modem Cable

LAN Cable

y You can attach your TV to your LAN by connecting the LAN port on the back of your TV to a IP Sharer which is connected

to an external modem. Use Cat 5 cable for the connection. See the diagram below.

The Modem Port on the Wall

External Modem

(ADSL / VDSL / Cable TV)

LAN CableModem Cable LAN Cable

IP Sharer

(having DHCP server)

TV Rear Panel

y Depending on how your network is configured, you may be able to attach your TV to your LAN by connecting the LAN

port on the back of your TV directly to a network wall outlet using a Cat 5 cable. See the diagram below. Note that the wall
outlet is attached to a modem or router elsewhere in your house.

TV Rear Panel

The LAN Port on the Wall

LAN Cable

If you have a Dynamic Network, you should use an ADSL modem or router that supports Dynamic Host Configuration
Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway,
and DNS values your TV needs to access the Internet so you don’t have to enter them manually. Most home networks are
Dynamic Networks.

Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address,
subnet mask, gateway, and DNS values manually on your TV’s Cable Setup Screen when you set up the network
connection. To get the IP address, subnet mask, gateway, and DNS values, contact your Internet Service Provider (ISP). If
you have a Windows computer, you can also get these values through your computer.

✎

You can use ADSL modems that support DHCP if your network requires a Static IP address. ADSL modems that
support DHCP also let you use Static IP addresses.

English

30

[7790_GER]BN68-02696K-00L04.indb 30 2010-03-26 오후 4:15:10