Page 1
¦¦ Connecting¦a¦AV¦device
U
(
)
1 (DVI)
2
USB
B
HDMI IN 3
W
R
1 (DVI)
HD¦connection
Using an HDMI Cable
HDMI OUT
2
HDMI IN 3
B
USB
HD¦connection
DVD / Blu-ray player
/ HD Cable Box / HD
STB (Set-Top-Box)
satellite receiver
Using an HDMI to DVI Cable
DVI OUT
DVI
1 (DVI)21
R R GB
W
R GB
W
R
AUDIO OUT
R
W
W
R
Device
Y
WR
Y
Device
EXT
AUDIO OUT COMPONENT OUT
DVD, Blu-ray player,
cable box, STB satellite
AUDIO OUT VIDEO OUT
Device
receiver, VCR
Using a Scart Cable
Using a Component Cable
Component connection
English -4
Using an Audio/Video Cable
Page 2
Plasma TV
QUICK SETUP GUIDE
¦¦ The¦Supplied¦Accessories
y Remote Control & Batteries (AAA x 2)
y Owner’s Instructions
y Quick Setup Guide
yBlanking Bracket yCable Tie yFerrite Core for Power Cord (2EA)
See separate guide for installing the stand.
yStand (1EA) yGuide Stand (1EA) yScrews (8EA)
Ferrite Core for Power Cord: The ferrite cores are used to shield the cables from interference. When connecting a cable,
✎
open the ferrite core and clip it around the cable near the plug as shown in the figure.
Distance between the ferrite core and one end of the cord put into the TV set
x
y A : below 50 mm
y B : below 20 mm
A
B
or
yCleaning Cloth
yPower Cord
(M4 X L12)
English - 1
BN68-02794A-00
Page 3
¦¦ Installing¦the¦Stand
CH LIST
MUTE
POWE
R
SOURC
E
PRE-
CH
MEDIA.P
TOOLS
INFO
TTX/MIX
3
4
Preset Step¦1 Step¦2
Front
Back
✎
Preset: Place the Guide Stand and Cover Neck onto the stand and fasten it using the screws. Applicable to models
(Depending on the model)
Step¦1.¦ Connect the Guide Stand to the Stand using five screws (M4 X L12) as shown.
✎
Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.
✎
Make sure that at least two persons lift and move the PDP TV.
✎
Stand the product up and fasten the screws. If you fasten the screws with the PDP TV placed down, it may lean to
one side.
Step¦2.¦Fasten two screws (M4 X L12) at position 1, and then fasten two screws (M4 X L12) at position 2.
✎
Stand the product up and fasten the screws. If you fasten the screws with the PDP TV placed down, it may lean to
one side.
2
1
¦¦ Using¦the¦remote¦control¦buttons
MENU
GUIDE
MENU Button
Display the main on-screen menu.
ENTERE / DIRECTION Buttons
Move the cursor and select an
item. Select the currently selected
item. Confirm the setting.
RETURN Button
Return to the previous menu.
¦¦ Installing¦Batteries¦in¦the¦Remote¦Control
RETURN
EXIT
✎
NOTE
Use the remote control within 23 feet from the TV.
x
Bright light may affect the performance of the
x
remote control. Avoid using nearby special
fluorescent light or neon signs.
The colour and shape may vary depending on the
x
model.
EXIT
Exit the on-screen menu.
English - 2
Page 4
¦¦ Plug¦&¦Play
1 (DVI)
1 (DVI)
(
)
Plug & Play
Plug & Play
Plug & Play
Plug & Play
Plug & Play
Plug & Play
Plug & Play
Plug & Play
How to get the best perfotmance from your new HDTV
1/2
Step 1. Connect the HD Box to the using HDMI or Component
cables.
TV rear view ►
HDMI Cable
HDMI Cable
When the TV is initially powered on, basic settings proceed automatically and subsequently.
If you want to reset this feature, press the MENU button to display menu.
You can set the Plug & Play by selecting ‘Setup → Plug & Play’.
VHF/UHF Antenna
Power Input
On the screen, you can set as follows.
✎
The each step may vary depending on the Antenna source.
Step 1
Select the OSD Language.
Menu Language : : English
Nederlands
English
Eesti
U
▲
▼
Move E Enter
Select the usage mode.
Step¦4 Step¦5 Step¦6
Antenna Source : Air ►
Channel Source : Digital & Analogue
Serch
Previous Skip U Move E Enter
Auto Store in progress.
Channels : 7
Digital
Analogue 0
or
DVI
1
Step¦2 Step¦3
Select Country.
Store Demo Home Use
Previous U Move E Enter
TV:2 Radio:0 Data/Other: 0
2
Stop
E
15%
Enter
Country :
Set the Clock Mode.
Clock Mode : Manual ►
Cable
ANT OUT
Turkey
United Kingdom
Estonia
U
Move E Enter
Auto
Manual
U
Move E Enter
▲
▼
Step¦7 Step¦8
Enjoy your TV.
OK
Previous Skip ► Next
English - 3
Loading...