Samsung PS-42V4S, PS-42V6S User Manual

Page 1
ENG
Infrared Remote Control
TURNS THE PDP ON AND OFF
DIRECT CHANNEL SELECTION
EXTERNAL INPUT SELECTION/
TELETEXT PAGE HOLD
VOLUME INCREASE
TEMPORARY SOUND SWITCH-OFF
VOLUME DECREASE
(DEPENDING ON THE MODEL)
TELETEXT STORE
MENU DISPLAY/
TELETEXT INDEX
MOVE TO THE REQUIRED
ADJUST AN OPTION VALUE
MENU OPTION/
RESPECTIVELY
TUNES TO THE PREVIOUS CHANNEL
NEXT CHANNEL/ TELETEXT NEXT PAGE
PRESS TO SELECT ALL OF THE AVAILABLE VIDEO SOURCES/ TELETEXT MODE (LIST/FLOF) SELECTION (DEPENDING ON THE MODEL)
PREVIOUS CHANNEL/ TELETEXT PREVIOUS PAGE
INFORMATION DISPLAY/ TELETEXT REVEAL
TV MODE SELECTION EXIT TELETEXT (DEPENDING ON THE MODEL)
CONFIRM YOUR CHOICE (STORE OR ENTER)
SOUND MODE SELECTION/
TELETEXT SUB-PAGE
MIX BOTH TELETEXT INFORMATION
AND THE NORMAL BROADCAST
TELETEXT DISPLAY/
The performance of the remote control may be affected by bright light.
PICTURE SIZE/ TELETEXT SIZE SELECTION
PICTURE STILL/ TELETEXT CANCEL
SOUND EFFECT SELECTION
PICTURE EFFECT SELECTION
Page 2
ENG
Connecting to the External Devices
“MONITOR OUT” are used for the equipment with an RGB output, such as video game devices or video disc players.
Rear of the TV
(Input/Output)
This end can be fitted with:
A SCART connector
Three RCA connectors (VIDEO + AUDIO-L/R)
Input/Output Specification
or
VCR
DVD
Decoder /
Video game device
Video disc player
Satellite receiver
Connector
Video Audio (L/R) S-Video RGB Video + Audio (L/R)
Ext.1 ✔✔ ✔✔ Only TV output is available.
Ext.2 ✔✔ ✔ Output you can choose.
Input Output
Rear of the TV
(Input/Output)
Camcorder
Video disc player
Video game device
Page 3
Connecting to the S-Video Input
The S-VIDEO and RCA (AUDIO-L/R) connectors are used for equipment with an S-Video output, such as a camcorder or VCR.
Rear of the TV
Camcorder
and
VCR
ENG
To play picture and sound, both the S-VIDEO and RCA connectors must be used.
Whenever you connect an audio or video system to your television,
ensure that all elements are switched off. Refer to the documentation supplied with your equipment for detailed connection instructions and associated safety precautions.
Page 4
ENG
Connecting to the DVI Input
The “DVI” (video) and “L-AUDIO-R” connectors are used for equipment with a DVI output. (Not Compatible with PC)
Rear of the TV
Satellite receiver
and
DVD
Page 5
Connecting to the Component Input
Rear of the TV
DVD
or
DTV receiver
The “COMPONENT” connectors are used for DTV receiver or DVD. (480i,p/576i,p/720p/1080i)
ENG
Page 6
ENG
Connecting and Using the Home Theater System
Use the Monitor Out ports of the PDP for Home Theater System Connections.
Rear of the TV
Connecting the Home Theater System
Connect the monitoring audio out L, and R jacks of the MONITOR OUT on the rear-side connection panel of the PDP TV to the AUDIO IN jacks of the DVD Home Theater System (or AV Receiver) using the audio cable.
Press the TV/VIDEO button to select the desired external device connected to the PDP TV.
If you want to hear the sound through separate speakers, cancel the internal amplifier.
DVD Home Theater
Refer to corresponding user’s manual from the manufacturer for wiring the
To Display the DVD Home Theater
!
Turn the PDP on and press the TV/VIDEO button to select the Ext.1 (or Ext.2).
@
Be sure to connect the video cable properly if desired external input (Ext.1 or Ext.2) cannot be selected.
#
Play the DVD after activating the DVD Home Theater System.
$
Use the volume control of the Home Theater System while watching the PDP using the DVD Home Theater, where the PDP TV does not produce the audio.
speakers to the DVD Home Theater System (or AV Receiver).
Disable the PDP TV internal speaker to enjoy the rich sound through the speakers of your Home Theater System.
In this case, enjoy the sound from the Home Theater System while the PDP TV does not produce the audio.
AV Receiver Amplifier
Loading...