Samsung PN60F5500AFXZA User Manual

QUICK START

Welcome to your new Smart TV!

The following instructions cover assembling, connecting, and setting up your new TV. Make sure you have the accessories listed below.

Attach the TV to the Stand

Step

Warning: Screens can be damaged from direct pressure when handled incorrectly. We recommend lifting the TV by the edges, as shown.

Connect video devices

Step

GUIDE

BN68-05034A-04

Using the Smart Touch Control

Step

Power on and start the initial setup

Step

Included in this box

Remote Control Stand Parts and Cables

Smart Touch Control Stand Mount Power cord

Batteries (AAA x 2) IR extender Cable manager

Also included: User manual, regulatory guide, 3D Active Glasses, ferrite core

Step 1 Attach the TV to the Stand

Lay the TV on a soft surface, screen side down.

REQUIRED TOOLS: a Phillips head screwdriver and a soft, flat surface larger than the TV (such as the box).

Use the packing material to protect the screen.

Fit the stand and mount together, making sure the notch on the mount aligns with the stand.

x 8

Base Screws

Find the stand base and screws in the box and set aside.

Insert 4 screws and secure the stand to the mount.

51 inch models:

x4 (M4 X L12)

Holding the stand parallel to the screen, slide the stand into the notches on the back of the TV.

60 inches and above models:

x4 (M4 X L10)

Insert 4 screws and secure the stand to the TV.

x4 (M4 X L12)

1 2 3

Step 2 Connect video devices

We suggest using HDMI connections whenever possible for the best picture quality.

Please check the shape of the plugs to avoid inserting them upside down.

✎

The appearance of your TV may differ from the images below, depending on the model.

✎

Power Input

Plug in after you have made all other connections.

Connect the IR extender to the IR Out port to control external devices connected to the TV using the Smart Touch Control. For more detailed information, refer to the "Uni- versal Remote Control Setup" section in the User manual.

You can connect home theater systems to the OPTICAL or AUDIO OUT ports.

IR OUT

DIGITAL

AUDIO OUT

(OPTICAL)

USB Connections

You can connect USB storage devices to the USB ports and enjoy personal photos, videos, and music.

USB

(5V 0.5A)

(DVI)

HDMI IN 3

(ARC)

HDMI IN 2

Best Connection : HDMI

We suggest using HDMI whenever

HDMI Cable

possible.

(STB)

HDMI IN 1

LAN

USB

AIR/CABLE

ANT IN

(HDD 5V / TV CAMERA)

EX-LINK

HDMI 1 is the default port for a cable or satellite set-top box.

Use the other ports for Blu-ray players, game consoles, and other devices.

HDMI Port

Connect the cable from the antenna or cable TV outlet.

Wired Ethernet

Step 3 Using the Smart Touch Control

Insert the batteries into the Smart Touch Control

Insert the tip of a credit card or similar item into the notch on the side of the Smart Touch Control, and then twist the card to open and remove the remote's back cover.

Good Connection : Component and AV

Match the colors on your device's cables to the colors on the ports. Connect the yellow composite video out connector from an AV device to the green AV IN port.

AV also accepts component video connections (red/green/blue).

Step 4 Power on and start the initial setup

Information required:

• Wi-Fi network password (if you use one)

• Zip code

• Cable or satellite provider info

Plug in the TV. Press the power button on the remote to turn on the TV and start the initial set-up.

The TV must be connected to the Internet to use the Smart Features. If you have a wireless

✎

network, confirm that your network router is working before you start the initial setup. If you have a wired network, connect the TV to the network with a CAT 7 cable before you begin.

The notch’s location may vary depending on the type of Smart Touch Control provided.

✎

Using the touch pad

navigation selection scrolling

To control the highlight, move

your thumb across the pad.

To select an item, press the

pad until you hear a click.

Move your thumb along the

ridges to quickly scroll through

items.

Pairing the Smart Touch Control

If you need to reestablish the connection between the TV and the Smart Touch Control, press the pairing button at the back of the Smart Touch Control, pointing at the remote control sensor of the TV.

Congratulations on your new Smart TV!

Troubleshooting

The stand is wobbly or crooked

Make sure the arrows on the stand are properly aligned.

The TV won’t turn on

Make sure all cables are fully inserted, and that the remote has batteries installed.

I have extra parts

The TV includes some optional parts to help with wall mounting and cable routing.

If you experience issues, please do not take the TV back to the store.

In the United States of America, call us at 1-800-SAMSUNG (1-800-726-7864) or visit us at www. samsung.com or www.samsung.com/spsn for support and warranty service.

For other countries, refer to "Contact SAMSUNG WORLDWIDE" in the user guide.