Samsung PL-50Q91HP, PL-42C91HP, PL-50C91H, PL-42Q91HP User Manual

Contact SAMSUNG WORLD-WIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

Contacte con SAMSUNG WORLD-WIDE

Si tiene alguna pregunta o comentario referente a nuestros productos, por favor contacte con nuestro Servicio de Atención al Cliente.

Contate a SAMSUNG EM TODO O MUNDO

Caso tenha dúvidas ou comentários sobre os produtos da Samsung, entre em contato com o centro de atendimento ao cliente da SAMSUNG.

Country

ARGENTINE BRAZIL CHILE COLOMBIA COSTA RICA ECUADOR EL SALVADOR GUATEMALA JAMAICA MEXICO PANAMA PUERTO RICO REP. DOMINICA TRINIDAD & TOBAGO VENEZUELA

Customer Care Center 

0800-333-3733 4004-0000 800-726-7864 (SAMSUNG) 01-8000-112-112 0-800-507-7267 1-800-10-7267 800-6225 1-800-299-0013 1-800-234-7267 01-800-SAMSUNG (7267864) 800-7267 1-800-682-3180 1-800-751-2676 1-800-7267-864 0-800-100-5303

Web Site

www.samsung.com/ar www.samsung.com/br www.samsung.com/cl www.samsung.com/co www.samsung.com/latin www.samsung.com/latin www.samsung.com/latin www.samsung.com/latin www.samsung.com/latin www.samsung.com/mx www.samsung.com/latin www.samsung.com/latin www.samsung.com/latin www.samsung.com/latin www.samsung.com/latin

PL-42C91HP PL-42Q91HP

PL-50C91H

PL-50Q91HP

PLASMA DISPLAY

BN68-00866X-00

Owner’s Instructions

■

Model ________________ ■Serial No. ________________

Important Warranty Information Regarding Television Format Viewing

Wide screen format PDP Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark side-bars on nonexpanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week.

Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary

images that exceed the above guidelines can cause uneven aging of PDP Displays that leave subtle, but permanent burned-in ghost images in the PDP picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars.

On PDP models that offer picture sizing features, use these controls to view different formats as a full screen picture.

Be careful in the selection and duration of television formats used for viewing. Uneven PDP aging as a result of format selection and use, as well as burned-in images, are not covered by your Samsung limited warranty.

English-2

User Instructions

Screen Image retention

Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, refer to page 25 of this manual to reduce the degree of brightness and contrast of the screen when displaying a still image.

Altitude

The PDP can only operate normally at heights under 6500ft.

Heat on the top of the PDP TV

The top side of the product may be hot after long period of use as heat dissipates from the panel through the vent hole in the upper part of the product. This is normal and does not indicate any defect or operation failure of the product. However, children should be prevented from touching the upper part of the product.

The product is making a ‘cracking’ noise.

A ‘cracking’ noise may occur when the product contracts or expands due to a change of surrounding environment such as temperature or humidity. This is normal and not a defect of the unit.

Cell Defects

The PDP uses a panel consisting of 1,230,000(SD-level) to 3,150,000(HD-level) pixels which require sophisticated technology to produce. However, there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.

Avoid operating the TV at temperatures below 5°C (41°F)

A still image displayed too long may cause permanent damage to the PDP Panel.

Watching the PDP TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause similar effect to the screen. Damages caused by the above effect are not covered by the Warranty.

Afterimage on the Screen.

Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images for a long time.

Warranty

Warranty does not cover any damage caused by image retention. Burn-in is not covered by the warranty.

English-3

GENERAL INFORMATION

List of Features................................................................... 5

Accessories ........................................................................ 5

Viewing the Control Panel .................................................. 6

Viewing the Connection Panel............................................ 7

Remote Control................................................................... 8

Installing Batteries in the Remote Control.......................... 9

CONNECTIONS

Connecting VHF and UHF Antennas.................................. 9

Connecting Cable TV ......................................................... 10

Connecting a VCR.............................................................. 11

Connecting an S-VHS VCR................................................ 11

Connecting a Camcorder.................................................... 12

Connecting a DVD Player/Set-Top Box.............................. 12

Connecting a DVD Player/Set-Top Box via DVI ................. 12

Connecting a DVD Player/Set-Top Box via HDMI.............. 13

Connecting an Amplifier/DVD Home Theater..................... 13

Connecting a PC ................................................................ 14

OPERATION

Turning the TV On and Off ................................................ 15

Plug & Play Feature............................................................ 15

Changing Channels ............................................................ 16

Adjusting the Volume.......................................................... 17

Viewing the Display ............................................................ 17

Viewing the Menus ............................................................. 17

Memorizing the Channels................................................... 18

Setting Up Your Remote Control ........................................ 19

To Select the Source .......................................................... 24

To Edit the Input Source Name .......................................... 24

PICTURE CONTROL

Using Automatic Picture Settings................................... 25

Configuring Detailed Settings on the Picture................. 26

Changing the Screen Size ............................................. 27

Digital Noise Reduction.................................................. 28

Active Color.................................................................... 28

DNIe (Digital Natural Image engine).............................. 29

Freezing the Current Picture.......................................... 29

SOUND CONTROL

Using Automatic Sound Settings ................................... 30

Customizing the Sound.................................................. 30

Setting the TruSurround XT........................................... 31

Choosing a Multi-Channel Sound (MTS) Track............. 31

Automatic Volume Control ............................................ 32

Selecting the Internal Mute ............................................ 32

Listening to the Sound of the Sub (PIP) Picture............ 32

CHANNEL CONTROL

Adding / Locking Channels ............................................ 33

Fine Tuning Analog Channels........................................ 34

Setting the Color System ............................................... 34

PC DISPLAY

Using Your TV as a Computer (PC) Display.................. 35

Display Modes................................................................ 35

Setting up the TV with your PC ..................................... 36

Setting the Home Theater PC........................................ 37

TIME SETTING

Setting the Clock............................................................ 38

Setting the Sleep Timer ................................................. 39

Setting the On/Off Timer................................................ 40

FUNCTION DESCRIPTION

Selecting a Menu Language .......................................... 41

Viewing Closed Captions ............................................... 41

Using the Game Mode................................................... 42

Setting the Blue Screen Mode ....................................... 43

Setting the On/Off Melody.............................................. 43

Setting the Light Effect................................................... 43

Using the Energy Saving Feature.................................. 44

Preventing Screen Burn-in............................................. 44

Reducing the Effects of Screen Burn............................. 45

Setting the HDMI Black Level ........................................ 45

Setting the AV Color System.......................................... 46

Wall-Mount Adjustment (Sold separately)...................... 46

Viewing Picture-in-Picture.............................................. 47

ABOUT ANYNET+ (PL-42Q91HP/50Q91HP)

What is Anynet+?........................................................... 49

Connecting Anynet+ Devices ......................................... 49

Setting Up Anynet+........................................................ 50

Scanning and Switching between Anynet+ Devices...... 50

Recording....................................................................... 51

Listening through a Receiver (Home theater)................ 52

Check Points before Requesting Service ...................... 52

APPENDIX

Identifying Problems ..................................................... 53

Installing the Wall Mount Kit........................................... 54

How to assemble the Stand-Base

(depending on the model).............................................. 55

Specifications ................................................................. 55

Symbol Press Important Note One-Touch

➢

Button

English-4

General Information

List of Features

 Adjustable picture settings that can be stored in the TV’s memory.  Automatic timer to turn the TV on and off.  Aspecial sleep timer.  Remote Control

The supplied remote can be used to operate the TV as well as most DVD players, Set-top boxes, Cable Boxes and VCRs.

 Excellent Picture Quality

DNIe technology provides life-like clear images.

 SRS TruSurround XT

SRS TruSurround XT provides a virtual Dolby surround system.

 Anynet+ (PL-42Q91HP/50Q91HP models only)

AV network system (Anynet) that enables you to easily control Samsung audio-video(AV) devices from this TV.

Accessories

Please make sure the following items are included with your TV. If any items are missing, contact your dealer.

Remote Control /

AAA Batteries

Cloth-Clean

The following parts are sold separately and are available at most electronics stores.

S-Video Cable HDMI Cable HDMI/DVI Cable Video Cable

➢

Ferrite Core (Power Cord, Audio/Video Cable, S-Video Cable, Headphone)

The ferrite cores are used to shield the cables from interference. When connecting a cable, open the ferrite core and clip it around the cable near the plug.

Cover-Bottom / Screws (2ea)

(Refer to page 55)

Power Cord

Ferrite Core for

Power Cord

(3301-001110)

PC Cable PC Audio Cable Antenna Cable Component CablesAudio Cables

Owner’s Instructions Warranty Card /

(Not available in all locations)

Ferrite Core for

Side-AV / S-Video

(3301-001305)

Registration Card /

Safety Guide Manual

Ferrite Core for

Headphone

(3301-001456)

English-5

Viewing the Control Panel

Buttons on the Lower-Right Par

The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control. The product color and shape may vary depending on the model.

t of the Panel

SOURCE

Toggles between all the available input sources (TV, AV1, AV2, S-Video, Component1, Component2, PC, HDMI).

➢

In case of PL-42Q91HP/50Q91HP models, the Source List displays HDMI1 and HDMI2 instead of HDMI.

Press to see an on-screen menu of your TV’s features.

ˇ + VOL –

Press to increase or decrease the volume. In the on-screen menu, use the

you would use the œœand √√buttons on the remote control.

¨ CH

Press to change channels. In the on-screen menu, use the

you would use the ……and††buttons on the remote control.

+ VOL –

buttons as

English-6

(ENTER)

Press to confirm a selection.

POWER

Press to turn the TV on and off.

Power Indicator

Blinks and turns off when the power is on and lights up in stand-by mode.

Remote Control Sensor

Aim the remote control towards this spot on the TV.

∏

Speakers

Viewing the Connection Panel

Rear Panel Jacks

Use the rear panel jacks to connect A/V components that will be connected continuously, such as VCR or DVD players. For more information on connecting equipment, see pages 9-14. The product color and shape may vary depending on the model.

POWER IN

PL-42C91HP/50C91H

PL-42Q91HP/50Q91HP

Side Panel Jacks

Use the right side panel jacks to connect a component that is used only occasionally, such as a camcorder or video game. (See page 12) The product color and shape may vary depending on the model.

Connect the supplied power cord.

AUDIO-R/L (AV IN 1)

Audio inputs for external devices, such as a camcorder or VCR.

VIDEO (AV IN 1)

Video input for external devices, such as a camcorder or VCR.

AUDIO OUT (AUDIO-R/L)

Audio outputs for external devices.

DVI IN (AUDIO-R/L)

Connect to the DVI audio output jack of an external device.

➢

In case of PL-42Q91HP/50Q91HP models, only the HDMI IN 2 jack is compatible with DVI.

HDMI/DVI IN

Connect to the HDMI jack of a device with HDMI output. This input can also be used as a DVI connection with separate analog audio inputs. (In case of PL-42Q91HP/50Q91HP models, only the HDMI IN 2 jack is compatible with DVI.) An optional HDMI/DVI cable will be necessary to make this connection. When using an optional HDMI/DVI adapter, the DVI analog audio inputs on your TV allow you to receive left and right audio from your DVI device. (Not compatible with PC)

∏

ANT IN

75Ω Coaxial connector for Air/Cable Network.

”

COMPONENT IN 1, 2

Video (Y/PB/PR) and audio (R-AUDIO-L) component inputs.

’

SERVICE

These jacks are for service purposes only.

PC AUDIO IN

Connect to the audio output jack on your PC.

PC IN

Connect to the video output jack on your PC.

S-VIDEO IN

S-Video input for external devices with an S-Video output.

AV IN 2

Video and audio inputs for external devices.

HEADPHONE

You can connect a set of headphones if you wish to watch a television program without disturbing other people in the room.

English-7

Remote Control

You can use the remote control up to a distance of about 23 feet from the TV. When using the remote, always point it directly at the TV. You can also use your remote control to operate your VCR, Cable box, DVD player, or Set-Top Box.

Œ POWER

Turns the TV on and off.

´ NUMERIC BUTTONS

Press to directly select a channel.

ˇ-/

Use to select a channel over 100. For example, for channel 122, press “-”, then “2”, then “2”.

¨ CH LIST

Used to display Channel Lists on the screen.

ˆ TV

Selects the TV mode directly.

Ø VCR/DVD Functions

- Rewind

- Stop

- Play/Pause

- Fast Forward

∏

VOL +, VOL –

Press to increase or decrease the volume.

” MUTE

Press to temporarily cut off the sound.

’ MENU

Displays the main on-screen menu.

˝ S.MODE

Press to select the sound mode.

Ô RETURN

Returns to the previous menu.

 P. MODE

Press to select the picture mode.

Ò PIP

Picture-in Picture ON/OFF.

Ú DNIe (Digital Natural Image engine)

Activates DNIe Demo mode.

Æ MTS

Press to choose Stereo, Mono or Separate Audio Program (SAP broadcast).

ı SRS

Selects SRS TruSurround XT mode.

˜ SET

Sets the remote to control your TV, VCR, Cable, DVD, or Set-Top Box.

¯ TV / DVD / STB / CABLE / VCR

Press to operate your TV, DVD, STB, CABLE (box), or VCR.

Press to activate the backlight of the VOL, CH, and the active source button (TV, DVD, CABLE, STB, VCR) on the remote control.

¿ SOURCE

Press to display all of the available video sources.

¸ PRE-CH

Tunes to the previous channel.

˛ SLEEP

Press to select a preset time interval for

automatic shut off.

◊ HDMI (PL-42C91HP/50C91H models

only) Selects the HDMI mode directly.

REC (PL-42Q91HP/50Q91HP models only) Use to make a recording.

± CH

Press to change channels.

≠ EXIT

Press to exit the menu.

– UP / DOWN / LEFT /

RIGHT / ENTER

Use to select on-screen menu items and change menu values.

— INFO

Press to display information on the TV screen.

÷ CAPTION (PL-42C91HP/50C91H

models only) Controls the caption decoder.

Anynet+ (PL-42Q91HP/50Q91HP models only) Runs the Anynet+ view functions and sets up Anynet+ devices.

® STILL

Press to stop the action during a particular scene. Press again to resume normal video.

∑ P.SIZE

Press to change the screen size.

µ SOURCE

Press to select a signal from an external source in PIP.

¥ CH , CH

Displays the available channels in sequence. (These buttons change channels in the PIP window only.)

≥ POSITION

Change the position of the PIP screen.

≤ RESET

When your remote does not work, change the batteries and press the RESET button for 2-3 seconds before use.

➢ This is a special remote control for the visually impaired person, and has Braille points on

the POWER, Channel, Volume, STOP and PLAY/PAUSE buttons.

➢

The performance of the remote control may be affected by bright light.

➢

The illustration of the remote control shown in this manual has been created based on the

PL-42C91HP model.

English-8

Installing Batteries in the Remote Control

1. Lift the cover at the back of the remote control upward as shown in the figure.

2. Install two AAA size batteries.

➢

Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.

➢

Do not mix battery types, i.e. alkaline and manganese.

3. Replace the cover.

➢

Remove the batteries and store them in a cool and dry place if you won’t be using the remote control for a long time. The remote control can be used up to about 23 feet from the TV. (Assuming typical TV usage, the batteries last for about one year.)

➢

If the remote control doesn’t work, check the following:

1. Is the TV power on?

2. Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power outage, or is the power cord unplugged?

5. Is there a special fluorescent light or neon sign nearby?

Connections

Connecting VHF and UHF Antennas

If your antenna has a set of leads that look like this, see “Antennas with 300 ΩFlat Twin Leads” below.

If your antenna has one lead that looks like this, see “Antennas with 75 ΩRound Leads”. If you have two antennas, see “Separate VHF and UHF Antennas”.

Antennas with 300 Ω Flat

Twin Leads

If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has 300 Ωtwin flat leads, follow the directions below.

1. Place the wires from the twin leads under the screws on a 300-75Ωadapter (not supplied). Use a screwdriver to tighten the screws.

2. Plug the adaptor into the ANT IN terminal on the back of the TV.

Antennas with 75 Ω Round Leads

1. Plug the antenna lead into the ANT IN terminal on the back of the TV.

Separate VHF and UHF Antennas

If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics shops).

1. Connect both antenna leads to the combiner.

UHF

VHF

2. Plug the combiner into the ANT IN terminal on the bottom of the back panel.

UHF

VHF

English-9

Connecting Cable TV

To connect to a cable TV system, follow the instructions below.

Cable without a Cable Box

1. Plug the incoming cable into the ANT IN terminal on the back of the TV.

Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels.

➢

Connecting to a Cable Box that Descrambles All Channels

1. Find the cable that is connected to the ANT OUT terminal on your cable box.

This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”.

ANT IN

ANT OUT

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of Antenna cable. (These items are available at most electronics stores.)

➢

2. Connect the other end of this cable to the ANT IN terminal on the back of the TV.

1. Find and disconnect the cable that is

ANT IN

connected to the ANT IN terminal on your cable box.

This terminal might be labeled “ANT IN”,

➢

“VHF IN” or simply, “IN”.

2. Connect this cable to a two-way splitter.

Incoming

cable

Splitter

3. Connect an Antenna cable between an OUTPUT terminal on the splitter and the

Incoming

cable

Splitter

Cable Box

IN terminal on the cable box.

4. Connect an Antenna cable between the ANT OUT terminal on the cable box and

Incoming

cable

Splitter

Cable Box

RF (A/B)

Switch

the B–IN terminal on the RF(A/B) switch.

5. Connect another cable between the other OUT terminal on the splitter and the A–IN

Incoming

cable

Splitter

Cable Box

RF (A/B)

Switch

TV Rear

terminal on the RF (A/B) switch.

6. Connect the last Antenna cable between the OUT terminal on the RF (A/B) switch and

Incoming

cable

Splitter

Cable Box

RF (A/B)

Switch

After you have made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to view scrambled channels. (When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)

the ANT IN terminal on the rear of the TV.

English-10

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 9-10). Skip step 1 if you have not yet connected to an antenna or a cable system.

1. Unplug the cable or antenna from the back of the TV.

2. Connect the cable or antenna to the ANT IN terminal on the back of the VCR.

3. Connect an Antenna Cable

TV Rear Panel

VCR

➢

Each VCR has a different back panel configuration.

➢

When connecting a VCR, match the color of the connection terminal to the cable.

➢

The illustration for connecting jacks on the rear shown in this manual has been created based on the PL-42C91HP model. Even though the jack configuration is different from your model, the connection method is the same as in the illustration.

Audio Cable (Not supplied)

Video Cable (Not supplied)

Antenna Cable (Not supplied)

between the ANT OUT terminal on the VCR and the ANT IN terminal on the TV.

4. Connect a Video Cable between the VIDEO OUT jack on the VCR and the AV IN 1 [VIDEO] jack on the TV.

5. Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AV IN 1 [R-AUDIO-L] jacks on the TV.

➢

If you have a “mono” (non-stereo) VCR, use a Y-connector (not supplied) to hook up to the right and left audio input jacks of the TV. If your VCR is stereo, you must connect two cables.

Connecting an S-VHS VCR

Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR. (This connection delivers a better picture as compared to a standard VHS VCR.)

TV Rear PanelTV Side Panel

VCR

Audio Cable (Not supplied)

S-Video Cable (Not supplied)

Antenna Cable (Not supplied)

An S-Video cable is usually included with an S-VHS VCR. (If not, check your local electronics store.)

➢

Each S-VHS VCR has a different back panel configuration.

➢

When connecting an S-VHS VCR, match the color of the connection terminal to the cable.

➢

Some games may be displayed with a cut off picture when the TV is connected to a game player.

➢

1. To begin, follow steps 1–3 in the previous section to connect the antenna or cable to your VCR and your TV.

2. Connect an S-Video Cable between the S-VIDEO OUT jack on the VCR and the AV IN 2 [S-VIDEO] jack on the TV.

3. Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AV IN 2 [R-AUDIO-L] jacks on the TV.

English-11

Connecting a Camcorder

The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow you to view the camcorder tapes without using a VCR

TV Side Panel

1. Connect a Video Cable (or S-Video Cable) between

Camcorder

S-Video Cable (Not supplied)

Video Cable (Not supplied)

Audio Cable (Not supplied)

the AV IN 2 [VIDEO] (or S-VIDEO) jack on the TV and the VIDEO OUT jack on the camcorder.

2. Connect Audio Cables between the AV IN 2 [R-AUDIO-L] jacks on the TV and the AUDIO OUT

➢

Each Camcorder has a different back panel configuration.

➢

When connecting a Camcorder, match the color of the connection terminal to the cable.

jacks on the camcorder.

Connecting a DVD Player/Set-Top Box

The rear panel jacks on your TV make it easy to connect a DVD player/Set-Top Box to your TV.

1. Connect a Component

DVD Player / Set-Top Box

Audio Cable (Not supplied)

Component Cable (Not supplied)

➢

Component video separates the video into Y (Luminance (brightness)), P for enhanced video quality. Be sure to match the component video and audio connections. For example, if connecting the video cable to COMPONENT IN, connect the audio cable to COMPONENT IN also.

➢

Each DVD player/Set-top box has a different back panel configuration.

➢

When connecting a DVD player/Set-top box, match the color of the connection terminal to the cable.

➢

TV Rear Panel

(Blue) and PR(Red)

Cables between the COMPONENT IN 1 [Y, P

R](or COMPONENT IN 2

P [Y, PB, P and the COMPONENT OUT [Y, P player/Set-Top Box.

2. Connect Audio Cables between the COMPONENT IN 1 [R-AUDIO-L](or COMPONENT IN 2 [R-AUDIO-L]) jacks on the TV and the AUDIO OUT jacks on the DVD player/ Set-Top Box.

R]) jacks on the TV

B, P

R] jacks on the DVD

Connecting a DVD Player/Set-Top Box via DVI

This connection can only be made if there is a DVI Output jack on the external device.

TV Rear Panel (PL-42C91HP/PL-50C91H)TV Rear Panel (PL-42Q91HP/PL-50Q91HP)

DVD Player / Set-Top Box

DVI to HDMI Cable (Not supplied)

Audio Cable (Not supplied)

➢

Each DVD player/Set-top box has a different back panel configuration.

➢

When connecting a DVD player/Set-top box, match the color of the connection terminal to the cable.

➢

In case of PL-42Q91HP/50Q91HP models, only the HDMI IN 2 jack is compatible with DVI.

Audio Cable (Not supplied)

DVI to HDMI Cable (Not supplied)

English-12

1. Connect a DVI to HDMI Cable or DVI-HDMI Adapter between the HDMI/DVI IN (or HDMI IN 2) jack on the TV and the DVI OUT jack on the DVD player/Set-Top Box.

2. Connect Audio Cables between the DVI IN [R-AUDIO-L] jack on the TV and the AUDIO OUT jacks on the DVD player/ Set-Top Box.

Connecting a DVD Player/Set-Top Box via HDMI

This connection can only be made if there is an HDMI Output jack on the external device.

TV Rear Panel (PL-42Q91HP/PL-50Q91HP)

DVD Player/Set-Top Box

TV Rear Panel (PL-42C91HP/PL-50C91H)

Connect an HDMI Cable

between the

HDMI/DVI IN (or HDMI IN 1, 2) and the HDMI OUT on the DVD player/Set-Top Box.

on the TV

HDMI Cable (Not supplied)

What is HDMI?

• HDMI, or high-definition multimedia interface, is a next-generation interface that enables the transmission of the digital audio and video signals using a single cable without compression.

• “Multimedia interface” is a more accurate name for it especially because it allows multiple channels of digital audio (5.1 channels). The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports multi-channel digital audio.

➢

Each

➢ ➢

➢

DVD player/Set-top box

When connecting a When connecting via HDMI, you do not need to connect Audio Cables. You only need to connect Audio

cables when connecting via HDMI/DVI. If no video signal, turn Off your DVD player/Set-top box and turn it On again.

DVD player/Set-top box

has a different back panel configuration.

, match the color of the connection terminal to the cable.

Connecting an Amplifier/DVD Home Theater

Amplifier/DVD Home Theater

Audio Cable (Not supplied)

TV Rear Panel

1. Connect Audio Cables between the AUDIO OUT [R-AUDIO-L] on the TV and AUDIO IN on the Amplifier/DVD Home Theater.

When an audio amplifier is connected to the “AUDIO OUT [R-AUDIO-L]” terminals: Decrease the gain (volume) of the TV, and adjust the volume level with the Amplifier’s volume control.

➢

Each Amplifier/DVD Home Theater has a different back panel configuration.

➢

When connecting an Amplifier/DVD Home Theater, match the color of the connection terminal to the cable.

➢

English-13

Connecting a PC

TV Rear Panel

PC Audio Cable (Not supplied)

D-Sub Cable (Not supplied)

➢

Each PC has a different back panel configuration.

➢

When connecting a PC, match the color of the connection terminal to the cable.

➢

The HDMI/DVI jacks do not support PC connection.

➢

1. Connect a D-Sub Cable between PC IN [PC] jack on the TV and the PC output jack on your computer.

2. Connect a PC Audio Cable between PC IN [AUDIO] jack on the TV and the Audio Out jack of the sound card on your computer.

English-14

Operation

Turning the TV On and Off

Press the POWER button on the remote control. You can also use the POWER button on the TV.

➢

It may take a while when your TV starts.

Plug & Play Feature

When the TV is initially powered On, basic customer settings proceed automatically and subsequently:

Plug & Play

Start Plug & Play.

Enter Exit

Plug & Play

Language

Select Home Mode when installing this TV at home.

Shop

Move

Check antenna input.

English

Français

Español

Português

Enter SkipMove

Plug & Play

Enter Skip

Plug & Play

Home

1. Press the POWER button on the remote control. The message “Start Plug & Play.” is displayed. Press the ENTER button to select “OK”. The Language menu is displayed.

➢

The Language menu will automatically appear after several seconds, even if the ENTER button is not pressed.

2. Select the appropriate language by pressing the ……or ††button. Press the ENTER button to confirm your choice, then “Select Home Mode when installing this TV at home.” menu is automatically displayed.

3. Press the œ or √ button to select “Shop” or “Home”, then press the ENTER button. “Select the language of the OSD” menu is automatically displayed. The message “Check antenna input.” is displayed.

➢

The default selection is “Home”.

➢

We recommend setting the TV to Home mode for the best picture in your home environment.

➢

Shop mode is only intended for use in retail environments.

➢

If the unit is accidentally set to Shop mode and you want to return to Dynamic (Home) mode, press the Volume button and then hold down the MENU button for five seconds on the TV panel.

➢

The message Check antenna input will automatically appear after several seconds, even if the ENTER button is not pressed.

4. Press the ENTER button to select “OK”. The menu to select signal source is displayed.

5. Select the correct signal source (Air, STD, HRC, and IRC) by pressing the

……

or ††button, then press the ENTER button.

Enter Skip

Plug & Play

Air/Cable

Auto Program

Clock Set

Month Day Year Hour Minute am/pm

01 01 2007 12 : 00 am

Enjoy your watching.

Air

STD HRC

IRC

Enter SkipMove

Plug & Play

Air 3

Start

Enter Skip

Plug & Play

EnterAdjust Move

6. To start the channel search, press the ENTER button.

➢

The search will end automatically. Channels are sorted and stored in an order which reflects their position in the frequency range (with lowest first and highest last). When it has finished, the Clock Set menu is displayed.

➢

To stop the search before it has finished or return to normal viewing, press the MENU button.

7. Press the ENTER button.

Press the œ or √ button to move to the Month, Day, Year, Hour, Minute, or am/pm. Set the date and time you want by pressing the … or † button, then press the ENTER button.

➢

You can set the Month, Day, Year, Hour, and Minute directly by pressing the number buttons on the remote control.

8. When it has finished, the message “Enjoy your watching.” is displayed, and the channels which have been stored can be viewed.

Continued...

English-15

If you want to r

eset this feature...

Plug & Play Language : English Time Caption

Game Mode : Off

Blue Screen : Off Melody : Off

Setup

Move Enter Return

Plug & Play

Start Plug & Play.

Enter Return

1. Press the MENU button to display the menu.

Press the ……or ††button to select “Setup”, then press the ENTER button.

2. Press the ENTER button to select “Plug & Play”.

For further details on setting up options, refer to the page 15.

➢

Plug & Play can only be accessed in the TV mode.

Changing Channels

Using the Channel Buttons

1. Press the CH or CH button to change channels.

➢

When you press the CH or CH button, the TV changes channels in sequence. You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels). You will not see channels that were either erased or not memorized. See page 18 to memorize channels.

Using the Number Buttons

Use the number buttons to quickly tune to any channel.

1. Press the number buttons to go directly to a channel. For example, to select channel 27, press “2,” then “7.” The TV will change channels when you press the second number.

Using the “-/--” Button

1. To select a channel over 100, for channel 122, press “-”, then “2”, then “2”.

Using the PRE-CH Button to select the Previous Channel

1. Press the PRE-CH button. The TV will switch to the last channel viewed.

➢

To quickly switch between two channels that are far apart, tune to one channel, then use the number button to select the second channel. Then use the PRE-CH button to quickly alternate between them.

English-16

Adjusting the Volume

1. Press the

VOL +

VOL –

button to increase or decrease the volume.

Using the MUTE Button

At any time, you can cut off the sound using the MUTE button.

1. Press MUTE and the sound cuts off. The word “Mute” will appear in the lower-left corner of the screen.

2. To turn mute off, press the MUTE button again, or simply press the VOL +

VOL –

button.

Viewing the Display

The display identifies the current channel and the status of certain audio-video settings.

Air 3 Mono

Picture : Dynamic Sound : Custom MTS : Stereo SRS TS XT : Off

12 : 00 am

1. Press the INFO button on the remote control.

The TV will display the channel, the type of sound, and the status of certain picture and sound settings.

Viewing the Menus

Source List : TV Edit Name

Input

Move Enter Return

Press the INFO button once more or wait approximately 10 seconds and it disappears automatically.

1. With the power on, press the MENU button. The main menu appears on the screen. Its left side has five icons: Picture, Sound, Channel, Setup, Input.

2. Use the ……or ††button to select one of the five icons. Then press the ENTER button to access the icon’s sub-menu.

3. Press the EXIT button to exit.

It takes about one minute until the on-screen menu disappears.

➢

English-17

+ 39 hidden pages

Samsung PL-50Q91HP, PL-42C91HP, PL-50C91H, PL-42Q91HP User Manual

Important Warranty Information Regarding Television Format Viewing

User Instructions

Contents

General Information

List of Features

Accessories

Viewing the Control Panel

Viewing the Connection Panel

Remote Control

Installing Batteries in the Remote Control

Connections

Connecting VHF and UHF Antennas

Connecting Cable TV

Connecting a VCR

Connecting an S-VHS VCR

Connecting a Camcorder

Connecting a DVD Player/Set-Top Box

Connecting a DVD Player/Set-Top Box via DVI

Connecting a DVD Player/Set-Top Box via HDMI

Connecting an Amplifier/DVD Home Theater

Connecting a PC

Operation

Turning the TV On and Off

Plug & Play Feature

Changing Channels

Adjusting the Volume

Viewing the Display

Viewing the Menus