Page 1
Connecting VHF and UHF Antennas
Antennas with 75-ohm Round Leads
If your antenna looks like this: it has 75-ohm round leads.
Plug the antenna lead into the VHF/UHF terminal
on the PDP.
1
Use the Antenna Cable, an accessory included
in the product package.
1
Page 2
Connecting Cable TV
You can connect different cable systems to your PDP, including cable without a cable box,
and cable with a cable box that descrambles some or all channels.
Cable without a Cable Box
Plug the incoming cable into the VHF/UHF terminal on
the PDP.
1
Use the Antenna Cable, an accessory included
in the product package.
Cable with a Cable Box that Descrambles All Channels.
Find the cable connected to the ANTENNA OUT
terminal on your cable box. This terminal might be
1
labeled "ANT OUT", "VHF OUT" or simply "OUT".
Connect the cable to the VHF/UHF terminal on the
PDP.
2
Use the Antenna Cable, an accessory included
in the product package.
2
Page 3
Cable with a Cable Box that Descrambles Some (But Not All) Channels
To complete this connection you will need a two-way splitter, an RF (A/B) switch, and four coaxial
cables (which you can buy from your Samsung dealer or any electronics store).
Find and disconnect the cable that is connected to the ANTENNA IN terminal of
1
your cable box.
This terminal might be labeled "ANT IN",
"VHF IN" or simply, "IN". Connect this
cable to a two-way splitter.
Connect a coaxial cable between an OUTPUT terminal of the splitter and the IN termi-
2
nal of the cable box.
Connect a coaxial cable between the
ANTENNA OUT terminal of the cable box
3
and the B-IN terminal of the A/B switch.
Connect a coaxial cable between the
ANTENNA OUT terminal of the cable box
4
and the B-IN terminal of the A/B switch.
Connect the last coaxial cable between the
OUT terminal of the RF (A/B) switch and
5
the VHF/UHF terminal on the PDP.
After you've made this connection, set the A/B switch to the "A" position for normal viewing.
Set the A/B switch to the "B" position to view scrambled channels. (When you set the A/B switch
to "B", you will need to tune your Set-Top Box to the cable box's output channel, which is usually
channel 3 or 4.)
3
Page 4
Connecting a VCR
Connecting a VCR to the Video or S-Video/Audio jack
PDP
VCR
Power Plug
Audio Cable
S-Video Cable
or
Video Cable
How to Connect
Connect the Video/Audio cables between the AUDIO(L/R)/VIDEO jacks on the PDP and
AUDIO/VIDEO OUT jacks on the VCR. (Note: For better video, you can use an S-Video cable.)
Videotape Playback:
1. Turn on your PDP.
2. Press the TV/VIDEO button to select “Video” or “S-Video”.
3. Turn on your VCR, insert a videotape and press the play button.
4
Page 5
Connecting a Camcorder
Viewing camcorder tapes
PDP
Camcorder
Power Plug
Audio Cable
How to Connect
Connect a Video/Audio cable between the AUDIO(L/R)/VIDEO jacks on the PDP and the
VIDEO/AUDIO OUTPUT jacks on the camcorder.
Viewing Tapes
1. Turn on your PDP.
2. Press the TV/VIDEO button to select “Video”.
3. Turn on your camcorder and set it to Video Mode. (For details, refer to your camcorder
Owner’s instructions.)
Video Cable
4. Set the IN/OUT switch on your camcorder to OUT.
5. Insert the tape into the camcorder and press the Play button.
5
Page 6
Connecting a DVD Player (480i, 480p)
This PDP displays the optimum picture in 720p mode.
Playing DVD
PDP DVD Player
Power Plug
Video Cable
How to Connect
Connect a Video Cable between the Y, Pb, Pr(COMPONENT) input jacks on the PDP and
1
Y/PB/PRoutput jacks on the DVD player.
Connect a Audio Cable between the AUDIO L/R(COMPONENT) input jacks on the PDP and
2
the AUDIO OUT jacks on the DVD player.
To Play DVD:
1. Turn on your PDP.
2. Press the TV/VIDEO button to select “COMPONENT”.
3. Turn on your DVD player, insert a DVD disc and press the Play button.
• For an explanation of Component video, see your DVD owner’s instructions.
Audio Cable
6
Page 7
Connecting a DTV Receiver
(480p, 720p, 1080i)
This PDP displays the optimum picture in 720p mode.
Watching DTV
PDP
or
DTV Receiver
Power
Plug
Video Cable
Audio Cable
DVI Cable
Use a DVI-D connection cable. (sold separately)
How to Connect
Connect the cable or antenna to the antenna input jack on the DTV.
1
Connect a Video cable between the Y, Pb, Pr(COMPONENT) or DVI jack on the PDP and the
2
Y, PB, PR(VIDEO OUTPUT JACKS) on the DTV receiver.
Connect an Audio cable between the COMPONENT (L/R AUDIO) or DVI jacks on the PDP
3
and the AUDIO OUTPUT jacks on the DTV receiver.
To Watch DTV:
1. Turn on your PDP.
2. Press the TV/VIDEO button to select “COMPONENT” or “DVI”.
3. Turn on your DTV receiver.
• For an explanation of Component video, see your DTV receiver owner’s instructions.
7
Loading...