Charging the headset ................................................................................................................................ 6
Wearing the headset ..................................................................................................................................8
Using your headset
Turning the headset on or off .............................................................................................................10
Turning the indicator light on or off ................................................................................................ 11
Pairing and connecting the headset ................................................................................................11
Using call functions .................................................................................................................................15
Please read this manual before operating your headset, and keep it for future reference.
Graphics used in this manual are for illustration purposes. The actual products may vary.
SAMSUNG, and the SAMSUNG logo are registered trademarks of Samsung •
Electronics.
Bluetooth® is a registered trademark of the Bluetooth SIG, Inc. worldwide. More •
information about Bluetooth is available at www.bluetooth.com.
All other trademarks and copyrights are the property of their respective owners.•
2
Please read all Safety precautions before using your headset to ensure safe and proper use.
Safety precautions
When using your headset while driving, follow local regulations in the region you are in.•
Never disassemble or modify your headset for any reason. Doing this may cause the •
headset to malfunction or become combustible. Bring the headset to an authorised service
centre to repair it.
Keep your device and all accessories out of the reach of small children or animals. Small •
parts may cause choking or serious injury if swallowed.
Avoid exposing your device to very cold or very hot temperatures (below 0 °C or •
above 45 °C).
Extreme temperatures can cause the deformation of the device and reduce the charging
capacity and life of your device.
Do not allow your device to get wet — liquids can cause serious damage. Do not handle •
your device with wet hands. Water damage to your device can void your manufacturer’s
warranty.
Avoid using your device’s light close to the eyes of children or animals.•
Do not use the device during a thunderstorm. Thunderstorms can cause the device •
to malfunction and increase the risk of electric shock.
Excessive exposure to loud sounds can cause hearing damage. Exposure to loud
sounds while driving may distract your attention and cause an accident. Use only
the minimum volume setting necessary to hear your conversation.
English
3
Getting started
Your headset overview
Speaker
Mounting clip
Indicator light
Volume button
Microphone
Make sure you have the following items: headset, travel adapter and user
manual. The supplied items may vary.
4
Talk button
Charging socket
Button functions
ButtonFunction
Press and hold to turn the headset on.•
Press and hold for 3 seconds to turn the headset off.•
With the headset turned off, press and hold for 3 seconds •
Talk
to enter Pairing mode.
Press to answer or end a call.•
Press and hold to reject an incoming call. •
Press and hold to place a call on hold. •
Press and hold to switch between calls.•
English
Volume
Press to adjust the volume.•
Press and hold to turn the microphone on or off during a •
call.
5
Charging the headset
This headset has a rechargeable internal battery which is non-removable. Make sure
the headset is fully charged before using it for the first time.
Use only Samsung-approved chargers. Unauthorised or non-Samsung
chargers could cause damage to the headset or in extreme circumstances an
explosion, it could also invalidate any warranty on the product.
1 Connect the travel adapter to the charging
socket on the headset.
2 Plug the travel adapter in to the wall outlet.
During charging, the indicator light will turn
red. If charging does not begin, unplug the
travel adapter and plug it in again.
3 When the headset is fully charged, the red
indicator light changes to blue. Unplug the
travel adapter from the wall outlet and the
headset.
Repeatedly charging and discharging of the headset, over time will cause •
the battery performance to diminish. This is normal for all rechargeable
batteries.
6
Never make or receive calls while charging, always disconnect your headset •
from the charger and answer the call.
To save energy, unplug the travel adapter when not in use. The travel •
adapter does not have a power switch, so you must unplug it from the
outlet when not in use to avoid wasting power. The travel adapter should
remain close to the socket when in use.
Checking the battery level
To check the battery level, press and hold the Volume down button and the Talk
button at the same time. Depending on the battery level, the indicator light flashes 5
times in one of the following colours:
Battery levelIndicator light colour
Above 80%
80 ~20%
Below 20%Red
Blue
Violet
When the headset battery is low
The headset indicator light flashes red and you can hear beeps. If the headset powers
off during a call, the call will be automatically transferred to the phone.
English
7
Wearing the headset
Do not bend the mounting clip away from the body or apply too much •
pressure on it as this could cause permanent damage to the clip or headset.
If you have poor call quality issues, make sure that the earbud is properly •
placed over the ear hole or the microphone is not blocked.
The call quality may vary depending on how you grip your bluetooth •
headset. To minimize interference, we recommend you hold the middle
bottom part of the headset while talking on the phone.
8
Using your headset
This section explains how to turn the headset on or off, pair and connect the headset
to the phone, and use various functions.
Activated functions and features may differ depending on the phone type.•
Some devices, especially those that are not tested or approved by the •
Bluetooth Special Interest Group (SIG), may be incompatible with your
headset.
To ensure you get the best performance from your headset
Keep the distance between your headset and device as small as possible and avoid •
placing your body or other objects in the signals path.
Covering your headset or device could effect its performance so keep contact to a •
minimum.
English
9
Turning the headset on or off
To turn the headset on
Press and hold the Talk button. The blue indicator light flashes 4 times.
Turning the headset on for the first time, it will automatically enter pairing
mode for approx 3 minutes. For more information, see page 11.
To turn the headset off
Press and hold the Talk button for 3 seconds. The indicator light flashes blue and red
then turns off.
Activating Vibration mode
You can change the headset setting to vibrate when you receive a phone call, turn the
Headset on or off.
To activate Vibration mode
Press and hold the Talk button and the Volume up button at the same time for 1
second and release them. Your headset will vibrate if the vibration mode is activated
successfully.
10
To deactivate Vibration mode
Press and hold the Talk button and the Volume up button at the same time for 1
second and release them. The blue indicator light turns red and flashes twice.
Turning the indicator light on or off
The Headset status light is there to show you the current status of your headset,
but if it bothers you at night, you can turn it off.
Press and hold both Volume buttons simultaneously to turn the indicator light on or •
off.
You cannot switch the indicator of while in pairing mode.•
The indicator light will always work when the headset is turned on or off, •
when a call is received, in Pairing mode and when the battery is low.
Pairing and connecting the headset
Pairing means a unique and encrypted wireless connection between two Bluetooth
devices when they agree to communicate with each other.
In Pairing mode, two devices should be placed close enough.
English
11
Pairing and connecting the headset with a phone
1 Enter Pairing mode. (The blue indicator light stays lit and stays for 3 minutes.)
With the headset turned off, press and hold the Talk button for 3 seconds.•
With the headset turned on, press and hold the Talk button and the Volume up •
button at the same time for 3 seconds.
2 Activate the Bluetooth feature on your phone and search for the headset (see your
phone’s user manual).
3 Select the headset (HM5000) from the list of devices found by your phone.
4 If requested, enter the Bluetooth PIN 0000 (4 zeros) to pair and connect the
headset to your phone. Once pairing is completed, the headset will attempt to
reconnect each time you turn it on.
Your headset supports the Simple Pairing feature which allows the headset to
be paired with a phone without requesting a PIN. This feature is available for
phones that are compliant with Bluetooth version 2.1 or higher.
Pairing via the Active pairing feature
With the Active pairing feature, your headset automatically looks for a Bluetooth
device within range and tries to make a connection with it.
Make sure the phone’s Bluetooth visibility option is set on.
12
In Pairing mode, press and hold the Talk button on the headset. The indicator light •
colour changes to violet from blue.
The Bluetooth phone you want to connect with must not be paired with •
other devices. If the phone is already connected to another device, end the
connection and restart the Active pairing feature.
This feature may not be supported on some devices.•
Connecting with two Bluetooth phones
With the Multi-point feature activated, your headset can be connected to 2 Bluetooth
phones at the same time.
To turn Multi-point feature on
In Pairing mode, press and hold the
Volume up button. The blue indicator
light flashes 3 times.
1 After connecting with the first Bluetooth phone, enter Pairing mode again.
2 Activate the Bluetooth feature on the second Bluetooth phone and search for the
headset.
3 Select the headset (HM5000) from the list of devices found by the second
Bluetooth phone.
To turn Multi-point feature off
In Pairing mode, press and hold the
Volume down button. The red indicator
light flashes 3 times.
English
13
4 If requested, enter the Bluetooth PIN 0000 (4 zeros) to connect the headset to the
second Bluetooth phone.
5 Reconnect to the headset from the first Bluetooth phone.
Some phones may not be able to connect as a second Bluetooth phone.
Reconnecting the headset
If the connection is lost while in use:
Press the Talk button on the headset or use the Bluetooth menu on your phone.•
When the headset is paired with a phone, it will attempt to automatically
reconnect each time you turn it on. If the Multi-point feature is activated,
your headset will attempt to reconnect to the two most recently connected
devices. This feature may not be supported on some devices.
Disconnecting the headset
Turn off the headset or use the Bluetooth menu on your phone.
14
Using call functions
Available call functions may differ from phone to phone.•
Some functions are only available when using the Hands-Free profile. •
Making a call
Redialling the latest number
To redial the latest number dialed on the primary phone:
P• ress the Talk button.
To redial the latest number dialed on the secondary phone:
Press the Talk button twice.
•
Some phones open the call log list on the first press of the Talk button. Press
the Talk button again to dial the selected number.
Dialling a number by voice
Press and hold the Talk button.
This function is only available on the primary phone.
English
15
Answering a call
When a call is being recieved you will hear a tone, the blue indicator light
flashes twice and if the Vibration mode is activated, your headset will vibrate.
Press the Talk button to answer a call.
Rejecting a call
Press and hold the Talk button to reject a call when a call comes in.
If you receive calls on both connected phones at the same time you can only
answer or reject the call on the primary phone.
Ending a call
Press the Talk button to end a call.
Options available during a call
You can use the following functions during a call.
Adjusting the volume
Press the Volume up or down button to adjust the volume.
You will hear a beep when the volume level of the headset reaches it’s lowest
or highest level.
16
Muting the microphone
Press and hold the Volume up or down button to turn the microphone off so that the
person with whom you are speaking cannot hear you. When the microphone is turned
off, the headset beeps at regular intervals. Press and hold the Volume up or down
button again to turn the microphone back on.
Transferring a call from the phone to the headset
Press the Talk button on the headset to transfer a call from the phone to the headset.
Placing a call on hold
Press and hold the Talk button to place the current call on hold.
Answering a second call
Press the Talk button to end the first call and answer a second call.
•
Press and hold the Talk button to place the first call on hold and answer a second
•
call. To switch between the current call and the held call, press and hold the Talk
button.
English
17
Appendix
Frequently asked questions
Will my headset work
with laptops, PCs, and
PDAs?
Why do I hear static
or interference while on
a call?
Will my headset
interfere with my
car’s electronics, radio,
or computer?
18
Your headset will work with devices that support
your headset’s Bluetooth version and profiles.
For specifications, see page 23.
Appliances such as cordless phones and wireless
networking equipment may cause interference, which
usually sounds like static. To reduce any interference,
keep the headset away from other devices that use or
produce radio waves.
Your headset produces significantly less power
than a typical mobile phone. It also only emits
signals that are in compliance with the international
Bluetooth standard. Therefore, you should not expect
any interference with standard consumer-grade
electronics equipment.
Can other Bluetooth
phone users hear
my conversation?
Why do I hear an echo
while on a call?
How do I clean my
headset?
The headset does not
fully charge.
I cannot use all the
features described in
the manual.
When you pair your headset to your Bluetooth phone,
you are creating a private link between only these two
Bluetooth devices. The wireless Bluetooth technology
used in your headset is not easily monitored by
third parties because Bluetooth wireless signals are
significantly lower in radio frequency power than
those produced by a typical mobile phone.
Adjust the headset volume, or move to another area
and try again.
Wipe it with a soft dry cloth.
The headset and the travel adapter may not have
been connected properly.
Separate the headset from the travel adapter,
reconnect, and charge the headset.
Available features may vary depending on the
connected device. If your headset is connected to two
devices at once, some features may be unavailable.
English
19
Warranty and parts replacement
Samsung warrants this product as free of defects in material, design and workmanship for
the period of one year from the original date of purchase.
If during the period of warranty this product proves defective under normal use and service
you should return the product to the retailer from whom it was originally purchased or a
qualified service centre. The liability of Samsung and its appointed maintenance company
is limited to the cost of repair and/or replacement of the unit under warranty.
The warranty is limited to the original purchaser.•
A copy of your receipt or other proof of purchase is required for a proper warranty •
service.
The warranty is void if the product label is removed, or if the product has been subject •
to physical abuse, improper installation, modification, or repair by unauthorised third
parties.
Specifically exempt from any warranty are limited-life consumable components such as •
batteries and other accessories.
Samsung will not assume any responsibility for any loss or damage incurred in shipping. •
All repair work on Samsung products by unauthorised third parties voids any warranty.
* Depending on your region, the length of warranty may vary.
20
*
Correct disposal of this product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with
separate collection systems)
This marking on the product, accessories or literature indicates that the
product and its electronic accessories (e.g. charger, headset, USB cable)
should not be disposed of with other household waste at the end of their
working life. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate these items
from other types of waste and recycle them responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where they purchased
this product, or their local government office, for details of where and
how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product and its electronic
accessories should not be mixed with other commercial wastes for
disposal.
English
21
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with
separate battery return systems)
The marking on the battery, manual or packaging indicates that the
battery in this product should not be disposed of with other household
waste. Where marked, the chemical symbols Hg, Cd or Pb indicate that
the battery contains mercury, cadmium or lead above the reference
levels in EC Directive 2006/66.
The battery incorporated in this product is not user replaceable. For
information on its replacement, please contact your service provider.
Do not attempt to remove the battery or dispose it in a fire. Do not
disassemble, crush, or puncture the battery. If you intend to discard the
product, the waste collection site will take the appropriate measures for
the recycling and treatment of the product, including the battery.
This EEE is compliant with RoHS.
22
Specifications
ItemSpecifications and description
Bluetooth version3.0
Support profileHeadset Profile, Hands-Free Profile
Operating rangeUp to 10 metres
Standby timeUp to 200 hours*
Talk timeUp to 8 hours*
Charging timeApproximately 2 hours
* Depending on the phone type and usage, the actual time may vary.
English
23
Declaration of Conformity (R&TTE)
We, Samsung Electronics
declare under our sole responsibility that the product
Bluetooth Headset: HM5000
to which this declaration relates, is in conformity with the following standards and/or other normative documents.
SAFETY EN 60950- 1 : 2006 + A11 : 2009
EMC EN 301 489-01 V1.8.1 (04-2008)
EN 301 489-17 V2.1.1 (05-2009)
RADIO EN 300 328 V1.7.1 (10-2006)
We hereby declare that [all essential radio test suites have been carried out and that] the above named product is in conformity to all
the essential requirements of Directive 1999/5/EC.
which will be made available upon request.
(Representative in the EU)
Samsung Electronics Euro QA Lab.
Blackbushe Business Park, Saxony Way,
Yateley, Hampshire, GU46 6GG, UK*
2011.04.15 Joong-Hoon Choi / Lab Manager
(place and date of issue) (name and signature of authorised person)
* It is not the address of Samsung Service Centre. For the address or the phone number of Samsung Service Centre, see the warranty card or
contact the retailer where you purchased your product.
FAQ s .........................................................................................................................................................................43
Garantie und Ersatzteile...................................................................................................................................45
Korrekte Entsorgung von Altgeräten .........................................................................................................46
Korrekte Entsorgung der Batterien dieses Produkts ............................................................................47
Kein Teil dieses Benutzerhandbuches dar f ohne die vorherige schriftliche Zustimmung
von Samsung Electronics vervielfältigt, verteilt, übersetzt oder in anderer Weise
oder auf anderem Weg übertragen werden, sei es elektronisch oder mechanisch,
einschließlich der Erstellung von Fotokopien, der Protokollierung oder Speicherung
von Teilen in einem System zur Speicherung und Wiedergewinnung von Daten.
Marken
SAMSUNG und das SAMSUNG-Logo sind eingetragene Marken von Samsung •
Electronics.
Bluetooth® ist eine weltweit eingetragene Marke von Bluetooth SIG, Inc.•
Weitere Informationen zu Bluetooth finden Sie auf www.bluetooth.com.
Jegliche andere Marken und Urheberrechte sind Eigentum der jeweiligen Inhaber.•
Die in diesem Handbuch
26
Lesen Sie vor der Verwendung des Bluetooth-Hörers die Sicherheitshinweise, um den
sicheren und ordnungsgemäßen Umgang zu gewährleisten.
Sicherheitshinweise
Wenn Sie den Bluetooth-Hörer beim Fahren verwenden, beachten Sie die Vorschriften, •
die dafür in der Region, in der Sie sich befinden, gelten.
Bauen Sie den Bluetooth-Hörer nie auseinander und nehmen Sie keine Änderungen daran •
vor. Dies könnte zu Störungen am Bluetooth-Hörer oder leichter Entflammbarkeit führen.
Bringen Sie den Bluetooth-Hörer zu einem autorisierten Fachhändler zur Reparatur.
Achten Sie darauf, dass das Gerät samt Zubehör nicht in die Reichweite kleiner Kinder und •
von Tieren gelangt. Kleine Teile können bei Verschlucken zur Erstickung oder zu schweren
Verletzungen führen.
Schützen Sie Ihr Gerät vor extrem kalten oder heißen Temperaturen (unter 0 °C bzw. •
über 45 °C).
Extreme Temperaturen können zur Verformung des Geräts führen und die Ladekapazität und
Haltbarkeit des Geräts beeinträchtigen.
Lassen Sie das Gerät nicht nass werden – Flüssigkeit kann schweren Schaden anrichten. •
Bedienen Sie das Gerät nicht mit nassen Händen. Durch Wasserschäden kann
die Herstellergarantie für Ihr Gerät erlöschen.
Verwenden Sie das Licht des Geräts nicht in der Nähe der Augen von Kindern oder Tieren.•
Verwenden Sie das Gerät nicht während einem Gewitter. Gewitter können zu Fehlfunktionen i m •
Gerät und einem erhöhten Risiko eines elektrischen Schlags führen.
Ein übermäßig lauter Geräuschpegel kann zu Hörschäden führen. Ein übermäßig
lauter Geräuschpegel während dem Fahren kann Sie vom Fahren ablenken
und zu einem Unfall führen. Verwenden Sie für Gespräche nur die minimal
erforderliche Lautstärkeeinstellung.
Deutsch
27
Erste Schritte
Bluetooth-Hörer-Übersicht
Lautsprecher
Halterungsclip
Anzeigeleuchte
Lautstärketasten
Mikrofon
Vergewissern Sie sich, dass folgendes Zubehör beiliegt: Bluetooth-Hörer,
Reiseadapter, und Benutzerhandbuch. Die mitgelieferten Teile variieren
eventuell.
28
Sprechtaste
Anschlussbuchse
für Ladegerät
Loading...
+ 123 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.