Samsung P50HP, P42HP User Manual
PDP MONITOR
quick start guide
P42HP P50HP
ii
Introduction
Package Contents
Note
Please make sure the following items are included with your PDP Display.
If any items are missing, contact your dealer.
Contact a local dealer
Unpacking
Manuals
to buy optional items.
PDP Display
Quick Setup Guide Warranty Card
User's Guide
(Not available in all loca-
tions)
Cables
D-Sub Cable Power Cord
Others
Remote Control Batteries (AAA X 2) Ferrite Core for Power
Cord
Introduction
Others
(Not available in all loca-
tions)
Sold separately
DVI Cable Wall Mount KIT LAN Cable
TV tuner box NetWork Box Semi Stand KIT
(3301-001305)
BNC Cable
Note
• You can purchase and connect a separate network box or TV tuner box. For information
on how to use these, refer to their respective user manuals.
•
You can only connect one external box.
Ferrite Core (Power Cord)
• The ferrite cores are used to shield the cables from interference.
• When connecting a cable, open the ferrite core and clip it
around the cable near the plug.
Your PDP Display
Front
Introduction
SOURCE button [SOURCE]
Switches from PC mode to Video mode. Changing the source is only allowed for external devices that are connected to the PDP Display at the
time.
[PC] → [DVI] → [AV] → [HDMI] → [MagicInfo] → [TV] → [BNC] → [Com-
ponent]
Note
The TV menu is available when a TV tuner box is installed.
•
• The MagicInfo menu is available when a network box is installed.
Enter button [
Activates a highlighted menu item.
MENU button [MENU]
Opens the on-screen menu and exits from the menu. Also use to exit the
OSD menu or return to the previous menu.
- VOL+
Moves from one menu item to another horizontally or adjusts selected
menu values. When OSD is not on the screen, push the button to adjust
volume.
SEL
]
Moves from one menu item to another vertically or adjusts selected menu
values.
/ When OSD is not on the screen, push the button to adjust channel.
Power button [ ]
Use this button for turning the PDP Display on and off.
Rear
Introduction
Power indicator
Shows PowerSaver mode by blinking green
Note
See PowerSaver described in the manual for further information regarding
power saving functions. For energy conservation, turn your PDP Display
OFF when it is not needed or when leaving it unattended for long periods.
Remote Control Sensor
Aim the remote control towards this spot on the PDP Display.
Note
For detailed information concerning cable connections, refer to Connecting Cables under
Setup. The PDP Display 's configuration at the back may vary slightly depending on the PDP
Display model.
POWER
The power cord plugs into the PDP Display
and the wall plug.
Introduction
BNC/COMPONENT OUT [R/PR , G/Y ,
B/PB , H , V] (BNC/Component Connection
Terminal (Output))
BNC (Analog PC) Connection: connecting
the R, G, B, H, V ports
Component Connection: connecting the PR,
Y, PB ports
BNC/COMPONENT IN [R/PR , G/Y , B/
PB , H , V] (BNC/Component Connection Ter-
minal (Input))
RS232C OUT/IN (RS232C Serial PORT)
MDC(Multiple Display Control) Program Port
DVI / PC / HDMI IN [DVI/PC/HDMI AUDIO IN] (PC/DVI/HDMI Audio Connection
Terminal (Input))
DVI / PC / HDMI IN [HDMI]
Connect the HDMI terminal at the back of
your PDP Display to the HDMI terminal of
your digital output device using a HDMI cable.
DVI / PC / HDMI IN [RGB](PC Video
Connection Terminal)
Using a D-Sub Cable (15 pin D-Sub) - PC
mode (Analog PC)
DVI / PC / HDMI IN [DVI] (PC Video Connection Terminal)
Using a DVI Cable (DVI-D to DVI-D) - DVI
mode (Digital PC)
DC OUT [5V/1.5A]
Connect this to the POWER connector of a
TV tuner box or network box.
AV IN [VIDEO]
Introduction
Connect the [ VIDEO ] terminal of your monitor to the video output terminal of the external device using a VIDEO cable.
AV/COMPONENT AUDIO IN [L- AUDIO
- R]
Connect the port of the DVD, VCR (DVD /
DTV Set-Top Box) to the [ L- AUDIO - R ] port
of the PDP Display.
AUDIO OUT [L- AUDIO - R]
Headphone output terminal.
Kensington Lock
The Kensington Lock is a device used to
physically fix the system when using it in a
public place. The locking device has to be
purchased separately. The appearance and
locking method may differ from the illustration depending on the manufacturer. Refer to
the manual provided with the Kensington
Lock for proper use. The locking device has
to be purchased separately.
Note
See Connecting Cables
Note
The location of the Kensington Lock may be
different depending on its model.
Using the Anti-Theft Kensington
Lock
1. Insert the locking device into the Ken-
sington slot on the Monitor and turn
it in the locking direction .
2.
Connect the Kensington Lock cable.
3. Fix the Kensington Lock to a desk or a
heavy stationary object.
for further information regarding cable connections.
Remote Control
Note
The performance of the remote control may be affected by a TV or other electronic device
operating near the PDP Display , causing a malfunction due to interference with the frequency.
Introduction
POWER
OFF
Number Buttons
DEL button
+ VOL -
MUTE
TV/DTV
MENU
INFO
Color Buttons
TTX/MIX
STILL
AUTO
S.MODE
MDC
LOCK
SOURCE
ENTER/PRE-CH
CH/P
D.MENU
GUIDE
RETURN
Up-Down Left-Right buttons
EXIT
SRS
MagicInfo
P.MODE
DUAL/MTS
PIP
SWAP
Introduction
1. POWER
2. Off
3. Number Buttons
4. DEL
5. + VOL -
6.
MUTE
7. TV/DTV
MENU
8.
9.
10. INFO
button
Turns the product On.
Turns the product Off.
Press to change the channel.
The "-" button operates only for DTV. It is used to select
MMS (multi-channel) for a DTV.
Adjusts the audio volume.
Pauses (mutes) the audio output temporarily. This is dis-
played on the lower left corner of the screen. The audio
resumes if MUTE or - VOL + is pressed in the Mute mode.
Selects the TV and DTV mode directly.
Opens the on-screen menu and exits from the menu or
closes the adjustment menu.
Activates a highlighted menu item.
Current picture information is displayed on the upper left
corner of the screen.
11. Color Buttons Press to add or delete channels and to store channels to the
favorite channel list in the “Channel List” menu.
12.
13. STILL Press the button once to freeze the screen. Press it again
14. AUTO Adjusts the screen display automatically in PC mode. By
15. S.MODE When pressing this button, the current mode is displayed at
16. MDC
TTX/MIX
TV channels provide written information services via teletext.
- Teletext Buttons
For more information > TTX / MIX
to unfreeze.
changing the resolution in the control panel, auto function is
performed.
the bottom centre of the screen. The PDP Display has a
built-in high fidelity stereo amplifier. Then press the button
again to circle through available preconfigured modes.
( Standard → Music → Movie → Speech → Custom )
MDC Quick Launch Button.
17. LOCK Activates or deactivates all function keys on both the remote
control and the PDP Display except for the Power and LOCK
buttons.
18.
SOURCE
Press the button to change the input signal SOURCE.
Changing the SOURCE is only allowed for external devices
that are connected to the monitor at the time.
Introduction
19. ENTER/PRE-CH
20. CH/P In TV mode, selects TV channels.
21. D.MENU
22. GUIDE Electronic Program Guide (EPG) display.
23.
24. Up-Down Left-Right but-
tons
25. EXIT
26. SRS
27. MagicInfo
28. P.MODE When you press this button, current picture mode is dis-
RETURN
This button is used to return to the immediately previous
channel.
DTV menu display
Returns to the previous menu.
Moves from one menu item to another horizontally, vertically
or adjusts selected menu values.
Exits from the menu screen.
Selects SRS TruSurround XT mode.
MagicInfo Quick Launch Button.
played on the lower center of the screen.
AV / HDMI / TV / Component : P.MODE
29.
DUAL/MTS
The PDP Display has four automatic picture settings that
are preset at the factory. Then push button again to circle
through available preconfigured modes. ( Dynamic →
Standard → Movie → Custom )
PC / BNC / DVI / MagicInfo
MagicBright is a feature providing the optimum viewing environment depending on the contents of the image you are
watching. Then push button again to circle through available
preconfigured modes. (Entertain → Internet → Text →
Custom )
DUAL-
STEREO/MONO, DUAL l / DUAL ll and MONO/NICAM
MONO/NICAM STEREO can be operated depending on the
broadcasting type by using the DUAL button on the remote
control while watching TV.
MTS-
You can select MTS (Multichannel Television Stereo) mode.
Audio Type MTS/S_Mode Default
FM Stereo Mono Mono Manual
Stereo Mono ↔ Stereo
SAP Mono ↔ SAP Mono
30. PIP Every time you press the button, a PIP screen appears.
- This fuction does not work for this PDP Display.
Change
31. SWAP Swaps the contents of the PIP and main image. The image
Mechanical Layout (P42HP)
Mechanical Layout
NETWORK MODEL SIZE
Introduction
in the PIP window will appear on the main screen, and the
main screen image will appear in the PIP window.
- This fuction does not work for this PDP Display.
Loading...