Page 1
Smart Signage User Manual (By Model)
This manual provides information about your Smart Signage including supported types and product specications per model.
OMN (OM46N OM55N)
OMN-D (OM55N-D)
The color and the appearance may differ depending on the product, and the content in the
manual is subject to change without prior notice to improve the performance.
© Samsung Electronics
Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Trademarks other than Samsung Electronics are
property of their respective owners.
Page 2
Table of contents
Preparations
Checking the Components 3
Ports 4
OM46N/OM55N 4
OM55N-D 5
Anti-theft Lock 6
Before Installing the Product (Installation
Guide) 7
OM46N/OM55N 7
OM55N-D 8
Installing the Wall Mount 11
Installing the Wall Mount 11
Wall Mount Kit Specifications (VESA) 11
Specifications
General 12
Preset Timing Modes 13
Appendix
License 15
2
Page 3
Chapter 01
Preparations
"Contact the vendor where you
purchased the product if any
components are missing.
"The appearance of the components
may differ from the images shown.
"A stand is not provided with the
product. To install a stand, you can
purchase one separately.
"Use either the back-side magnet or
the double-sided tape depending
on where you want to attach the
external ambient light sensor.
The warranty for adhesiveness of the
double-sided tape applies to rsttime-use only.
"The external ambient light sensor is
marked with the label on the sensor
cable.
Checking the Components
Quick Setup Guide
Batteries (AAA x 2)
(Not available in some locations)
(Not available in some locations)
Warranty card
Remote Control External ambient light sensor
Regulatory guide Power cord
External IR cable
(OM46N, OM55N x 1 / OM55N-D
x 2)
Power IN rubber
(Supported model: OM55N-D)
HOLDER-GUIDE x 2 / Screw (M3
x L6) x 4
(Supported model: OM55N-D)
Top cover
(Supported model: OM55N-D)
3
Page 4
Ports
"
The color and shape of parts may differ from what is shown. Specifications are subject to change without notice
to improve quality.
Port Description
OM46N/OM55N
RS232C
OUT / IN
AUDIO OUT
IR IN
AMBIENT
SENSOR IN
USB
LAN OUT
LAN IN
HDMI 1 IN
HDMI 2 IN
DP IN
Stick the receiver of an external IR
cable to this location when the cable
is not used or the product is moved.
Air outlet
Air inlet
RS232C OUT
RS232C IN
AUDIO OUT
IR IN
AMBIENT SENSOR IN
USB
¨
LAN OUT
LAN IN
HDMI 1 IN
HDMI 2 IN
DP IN
HDMI OUT
Connects to MDC using an RS232C adapter.
Outputs sound to an audio device via an audio cable.
Connects to an external IR cable that receives signals from the remote control.
Used to supply power to the external sensor board and to receive signals from
the ambient light sensor.
Connect to a USB memory device.
• Wired LAN connection port used to connect an external device such as a
laptop to connect to the Internet.
• Connects to MDC using a LAN cable. (10/100 Mbps)
Connects to MDC using a LAN cable. (10/100 Mbps)
Connects to a source device using a HDMI cable or HDMI-DVI cable.
Connects to a PC using a DP cable.
Connects to another product using a HDMI cable.
HDMI OUT
4
Page 5
OM55N-D
"
The color and shape of parts may differ from what is shown. Specifications are subject to change without notice
to improve quality.
"
Install this product for indoors only. Install the display labeled OUTDOOR in the direction of the window.
Port Description
Air outlet
Air inlet
RS232C IN
IR IN
USB
¨
HDMI IN
LAN
AMBIENT SENSOR IN
Connects to MDC using an RS232C adapter.
Connects to an external IR cable that receives signals from the remote control.
Connect to a USB memory device.
Connects to a source device using a HDMI cable or HDMI-DVI cable.
• Wired LAN connection port used to connect an external device such as a
laptop to connect to the Internet.
• Connects to MDC using a LAN cable. (10/100 Mbps)
Used to supply power to the external sensor board and to receive signals from
the ambient light sensor.
Setting up Device ID
OM55N-D model has separate remote sensors on the front and back sides.
Depending on the distance from the remote control or other surrounding conditions, it is possible both front and
back displays respond to the remote control signal. You can assign IDs to displays (INDOOR: 1, OUTDOOR: 2) and
follow the steps below to restrict remote control to one selected display only.
"
To reverse the remote controlled display after setting otherwise, first cancel the existing ID settings for the
INDOOR and OUTDOOR displays by pressing the UNSET button.
• To select the INDOOR display only
1) Position the remote control facing the INDOOR IR sensor and press SET → 1 → E on the control.
2) Position the remote control facing the OUTDOOR IR sensor and press SET → 1 → E on the control.
• To select the OUTDOOR display only
1) Position the remote control facing the INDOOR IR sensor and press SET → 2 → E on the control.
2) Position the remote control facing the OUTDOOR IR sensor and press SET → 2 → E on the control.
5
Page 6
Anti-theft Lock
"
An anti-theft lock allows you to use the product securely even in public places.
"
The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details.
"
The following images are for reference only. Real-life situations may differ from what is shown in the images.
"
Supported models: OM46N, OM55N
To lock an anti-theft locking device:
Fix the cable of your anti-theft locking device to a heavy object such as a desk.
1
Put one end of the cable through the loop on the other end.
2
Insert the locking device into the anti-theft lock slot at the back of the product.
3
Lock the locking device.
4
– An anti-theft locking device can be purchased separately.
– Refer to the user guide provided with your anti-theft locking device for details.
– Anti-theft locking devices can be purchased at electronics retailers or online.
6
Page 7
Before Installing the Product (Installation Guide)
Ventilation
"
Contact Samsung Customer Service Center for further details.
Installation on a Perpendicular Wall
To prevent injury, this apparatus must be securely attached to the floor/wall in accordance
with the installation instructions.
• Ensure that an authorized installation company installs the wall mount.
• Otherwise, it may fall and cause personal injury.
• Make sure to install the specified wall mount.
OM46N/OM55N
Tilting Angle and Rotation
"
Contact Samsung Customer Service Center for further details.
• The product can be tilted at a maximum angle of 15° from a perpendicular wall surface.
15°
A Minimum 60 mm
B Ambient temperature: Under 30 °C
"
When installing the product on a perpendicular wall, allow at least
60 mm of space between the product and wall surface for ventilation
and ensure that the ambient A temperature is kept below 30 °C.
A
B
"
Do not use this model installed on a ceiling, floor, or table.
7
Page 8
OM55N-D
"
Contact Samsung Customer Service Center for further details.
"
Do not install this product near machinery that works with oil (e.g. gas stations). Oil mist
may cause fans to malfunction.
"
Do not use in Landscape mode for this model.
Ventilation
"
Do not block the ventilation openings on the top and bottom sides.
A Distance from the show-window > 100 mm
B Distance from the ceiling > 300 mm
C Distance from the floor > 100 mm
D Operation temperature range: 0~30 ℃ (under direct sunlight)
B
A
D
C
8
Page 9
Installing the top cover
Install HOLDER-GUIDE x 2.
Insert the power cord into the power IN rubber and
connect the power cord.
Connect cables, e.g. external IR cable, power cord,
HDMI cable, and organize them as shown in the
image.
Place the top cover.
Securely position the external IR cable and the
external ambient light sensor at the specified
location.
9
Page 10
Removing handles
"
Remove the screw caps found at the
marked locations before installing on
the ceiling or with the stand.
Remove the handles from both sides of the
product.
Place the screws back into the screw holes and
fasten them.
Precautions for enclosure unit installation
If you want to make additional enclosure surrounding OMN-D product, refer to the following
guides.
• There should be no glass in front and back of the Enclosure.
• Don’t block the top and bottom vents of OMN-D product.
• Open rate above 70% is recommended for Inlet/Outlet vent of Enclosure.
10
Page 11
Installing the Wall Mount
"
Supported models: OM46N, OM55N
Installing the Wall Mount
• The wall mount kit (sold separately) allows you to mount the product on the wall.
• The provided image is only for reference. For detailed information on installing the wall mount, see instructions provided with the wall mount.
• We recommend you contact a technician for assistance when installing the wall mount bracket.
• Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you select to install the wall mount on your own.
Wall Mount Kit Specications (VESA)
"
Install your wall mount on a solid wall perpendicular to the floor. To
install the product on the other wall area, contact the nearest agency.
If you install the product on a slanted wall, it may fall and result in
severe personal injury.
• Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are
provided.
• Do not use screws that are longer than the standard length or do not comply with the VESA standard screw
specifications. Screws that are too long may cause damage to the inside of the product.
• For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may
differ depending on the wall mount specifications.
• Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to
personal injury. Samsung is not liable for these kinds of accidents.
• Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is
used or the consumer fails to follow the product installation instructions.
• Do not mount the product at more than a 15 degree tilt.
• Always have at least two people mount the product on a wall.
• Standard dimensions for wall mount kits are shown in the table below.
Model Name
OM46N / OM55N 400 × 400 (15.7 × 15.7) M8 4
"
Do not install your Wall Mount Kit while your product is turned on. It may result in personal injury due to electric
shock.
VESA screw hole specs (A * B) in
millimeters (inches)
Standard Screw Quantity
11
Page 12
Chapter 02
Specications
General
Model Name OM46N OM55N / OM55N-D
Panel
Power Supply
Size
Display area
46 CLASS (45.9 inches / 116.8
cm)
1018.08 mm (H) x 572.67 mm
(V)
40.1 inches (H) x 22.5 inches
(V)
AC100-240V~ 50/60Hz
Refer to the label at the back of the product as the standard
voltage can vary in different countries.
55 CLASS (54.6 inches / 138.7
cm)
1209.6 mm (H) x 680.4 mm (V)
47.6 inches (H) x 26.8 inches
(V)
"
Plug-and-Play
This monitor can be installed and used with any Plug-and-Play compatible systems. Twoway data exchange between the monitor and PC system optimizes the monitor settings.
Monitor installation takes place automatically. However, you can customize the installation
settings if desired.
"
Due to the nature of the manufacturing of this product, approximately 1 pixel per
million (1ppm) may appear brighter or darker on the panel. This does not affect product
performance.
"
This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
"
For detailed device specifications, visit the Samsung Electronics website.
Environmental
considerations
Operating
Storage
Temperature: 32 °F – 104 °F (0 °C – 40 °C)
* For installing the enclosure, keep the internal temperature
at 40 °C or below.
Humidity: 10% – 80%, non-condensing
Temperature: -4 °F – 113 °F (-20 °C – 45 °C)
Humidity: 5% – 95%, non-condensing
* Applicable before the product package is unpacked.
(USA only)
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website:
www.samsung.com/recyclingdirect or call, 1‐800‐SAMSUNG
12
Page 13
Preset Timing Modes
"
This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a
resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution
specified for your product.
"Horizontal Frequency
The time required to scan a single
line from the left to the right side
of the screen is called a horizontal
cycle. The reciprocal number of a
horizontal cycle is called horizontal
frequency. Horizontal frequency is
measured in kHz.
"Vertical Frequency
The product displays a single image
multiple times per second (like a
uorescent light) to display what
the viewer sees. The rate of a single
image being displayed repeatedly per
second is called vertical frequency
or refresh rate. Vertical frequency is
measured in Hz.
Model Name OM46N / OM55N OM55N-D
Synchronization
Horizontal Frequency
Vertical Frequency
Optimum resolution
Resolution
Maximum resolution
15 - 135 kHz (HDMI), 30 - 135 kHz (DisplayPort) 15 - 135 kHz (HDMI)
24 - 75 Hz (HDMI), 30 - 75 Hz (DisplayPort) 24 - 75 Hz (HDMI)
1920 x 1080 @ 60 Hz
3840 x 2160 @ 60 Hz
13
Page 14
The screen will automatically be adjusted if a signal that belongs to the following standard
signal modes is transmitted from your PC. If the signal transmitted from the PC does not belong
to the standard signal modes, the screen may be blank with the power indicator on. In such a
case, change the settings according to the following table by referring to the graphics card user
manual.
Horizontal
Resolution
Frequency
(kHz)
VESA, 1280 x 720 45.000 60.000 74.250 +/+
Vertical
Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
Horizontal
Resolution
Frequency
(kHz)
IBM, 720 x 400 31.469 70.087 28.322 -/+
MAC, 640 x 480 35.000 66.667 30.240 -/-
MAC, 832 x 624 49.726 74.551 57.284 -/-
MAC, 1152 x 870 68.681 75.062 100.000 -/-
VESA, 640 x 480 31.469 59.940 25.175 -/-
VESA, 640 x 480 37.861 72.809 31.500 -/-
VESA, 640 x 480 37.500 75.000 31.500 -/-
VESA, 800 x 600 35.156 56.250 36.000 +/+
VESA, 800 x 600 37.879 60.317 40.000 +/+
VESA, 800 x 600 48.077 72.188 50.000 +/+
VESA, 800 x 600 46.875 75.000 49.500 +/+
VESA, 1024 x 768 48.363 60.004 65.000 -/-
VESA, 1024 x 768 56.476 70.069 75.000 -/-
Vertical
Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
VESA, 1280 x 800 49.702 59.810 83.500 -/+
VESA, 1280 x 1024 63.981 60.020 108.000 +/+
VESA, 1280 x 1024 79.976 75.025 135.000 +/+
VESA, 1366 x 768 47.712 59.790 85.500 +/+
VESA, 1440 x 900 55.935 59.887 106.500 -/+
VESA, 1600 x 900 60.000 60.000 108.000 +/+
VESA, 1680 x 1050 65.290 59.954 146.250 -/+
VESA, 1920 x 1080 67.500 60.000 148.500 +/+
VESA, 2560 x 1440 88.787 59.951 241.500 +/-
CEA, 3840 x 2160
(HDMI)
VESA, 3840 x 2160
(DP)
"The OMN-D models are not available in the VESA 3840 x 2160 (DP).
67.500 60.000 297.000 +/+
133.313 59.997 533.250 +/-
VESA, 1024 x 768 60.023 75.029 78.750 +/+
VESA, 1152 x 864 67.500 75.000 108.000 +/+
14
Page 15
Chapter 03
Appendix
License
Manufactured under license from Dolby Laboratories.
Dolby, Dolby Audio, Pro Logic, and the double-D symbol are
trademarks of Dolby Laboratories.
"Supported models: OM46N, OM55N
The terms HDMI and HDMI High-Definition Multimedia Interface, and
the HDMI Logo are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.
Open Source Licence Notice
In the case of using open source software, Open Source Licences are available on the
product menu. Open Source Licence Notice is written only English.
For information on the Open Source Licence Notice, contact the Samsung Customer Center
or send email to oss.request@samsung.com.
THIS PRODUCT IS SOLD WITH A LIMITED LICENCE AND IS AUTHORISED TO BE USED
ONLY IN CONNECTION WITH HEVC CONTENT THAT MEETS EACH OF THE THREE
FOLLOWING QUALIFICATIONS: (1) HEVC CONTENT ONLY FOR PERSONAL USE; (2) HEVC
CONTENT THAT IS NOT OFFERED FOR SALE; AND (3) HEVC CONTENT THAT IS CREATED
BY THE OWNER OF THE PRODUCT.
THIS PRODUCT MAY NOT BE USED IN CONNECTION WITH HEVC ENCODED CONTENT
CREATED BY A THIRD PARTY, WHICH THE USER HAS ORDERED OR PURCHASED FROM
A THIRD PARTY, UNLESS THE USER IS SEPARATELY GRANTED RIGHTS TO USE THE
PRODUCT WITH SUCH CONTENT BY A LICENSED SELLER OF THE CONTENT.
YOUR USE OF THIS PRODUCT IN CONNECTION WITH HEVC ENCODED CONTENT IS
DEEMED ACCEPTANCE OF THE LIMITED AUTHORITY TO USE AS NOTED ABOVE.
15
Loading...