Page 1
Samsung OfficeServ
7100/7200 Series
Version 1.0
Last Update: 09/22/2011
3URYL VL RQL QJ Guide
Page 2
Samsung OfficeServ 7100/7200 Provisioning Guide
DISCLAIMER
The attached document is provided as a basic guideline for setup and configuration of
Samsung OfficeServ 7100/7200 Series IP PBX systems with MegaPath’s SIP Trunking
service, based on MegaPath’s testing and validation process. It does not include advanced
configurations to enable features such as voicemail, Find-Me-Follow-Me, etc. MegaPath is
not responsible for customer IP PBX configurations. For more information on advanced
features, please refer to your IP PBX documentation.
OVERVIEW
Samsung OfficeServ 7100/7200 series IP PBX (www.samsung.com) is an “all-in-one”
converged IP PBX solution featuring built-in PBX functionality, voicemail, and more. The
steps outlined in this guide reflect the process used by MegaPath to successfully configure
MegaPath’s SIP trunks on the described software/hardware versions only.
SUPPORTED HARDWARE MODELS
The following hardware models are interoperable and described with this setup guide:
Samsung OfficeServ 7100
Samsung OfficeServ 7200
SUPPORTED SOFTWARE DEPLOYMENTS
The following software deployments are interoperable and described with this setup guide:
• System software version: 11.03.18 V4.53c
REQUIRED INFORMATION
The following software deployments are supported with this setup guide:
Maximum Channels __________________________________________________
Host ______________________________________________________________
Username _________________________ Password ________________________
Page 2
Page 3
Samsung OfficeServ 7100/7200 Provisioning Guide
CONFIGURATION
OVERVIEW OF OFFICESERV 7100/7200 DEPLOYMENTS
Samsung OfficeServ 7100/7200 installations will be deployed using a Samsung iBG1000
router only. The IP-PBX connects to the iBG1000 directly via Ethernet. Below configuration
of this IP-PBX is done using the Samsung OfficeServ Installation Tool utility.
Note – Using this IP-PBX behind an Edgemarc ALG is not a supported configuration.
5.2.13 SIP Carrier Options
Configure the SIP Carrier Options within the Samsung Installation Tool utility
Set "SIP Carrier Name" to Megapath
Page 3
Page 4
Samsung OfficeServ 7100/7200 Provisioning Guide
Set “SIP Server Enable” to “Enable”
Set Registra Port to 5060
Set "Outbound Proxy” to Host address from Moses
Set “Outbound Proxy Port” to 5060
Set “DNS Server 1” and “DNS Server 2” to service provider’s DNS servers
Set "User Name” to SIP Trunk Username from Moses
Set "Auth Password” to SIP Trunk password from Moses
Set "SIP Destination Type” to “To Header”
Set "URI Type” to “SIP”
Set "SIP Signal Type” to “UDP”
Send CLI Number
Configure Send CLI Number options within the Samsung Installation Tool utility.
Page 4
Page 5
Samsung OfficeServ 7100/7200 Provisioning Guide
DID Ringing
Configure DID Ringing options within the Samsung Installation Tool utility.
Page 5
Loading...