Samsung OfficeServ 7070 System Description User guide

Download

Page 1

GABD-000286

Ed.

OfficeServ 7070

System Description

Page 2

This manual is proprietary to SAMSUNG Electronics Co., Ltd. and is protected by copyright. No information contained herein may be copied, translated, transcribed or duplicated for any commercial purposes or disclosed to the third party in any form without the prior written consent of SAMSUNG Electronics Co., Ltd.

TRADEMARKS

is the trademark of SAMSUNG Electronics Co., Ltd.

In addition, product names mentioned in this document may be trademarks and/or registered trademarks of

their respective companies.

WEEE SYMBOL INFORMATION

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems)

This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

EEE Yönetmeliğine Uygundur (This EEE is compliant with RoHS)

This manual should be read and used as a guideline for properly installing and operating the product.

This manual may be changed for the system improvement, standardization and other technical reasons without prior notice.

If you need updated manuals or have any questions concerning the contents of the manuals, contact our Document

Center at the following address or Web site:

Address: Document Center 2nd Floor Jeong-bo-tong-sin-dong. Dong-Suwon P.O. Box 105, 416, Maetan-3dong

Yeongtong-gu, Suwon-si, Gyeonggi-do, Korea 442-600

Homepage: http://www.samsungdocs.com

Page 3

INTRODUCTION

Purpose

This document introduces product overview, Hardware configuration, Specification and functions of OfficeServ 7070, which are required to understand OfficeServ 7070 system.

Document Content and Organization

OfficeServ 7070 System Description

This document consists of four Chapters, one Annex and Abbreviations.

CHAPTER 1. Overview of OfficeServ 7070

Describes the features and the main functions of OfficeServ 7070 over all and introduces system configuration and interface programming.

CHAPTER 2. Hardware of OfficeServ 7070

Introduces Hardware features, cabinet composition, boards by functions and configuration of OfficeServ 7070. In addition, this chapter describes various stations, wireless equipment and additional equipment available for OfficeServ 7070.

CHAPTER 3. Specification of OfficeServ 7070

Introduces the detailed standards, such as system capacity, electrical standards, power standards, ring and tone, equipment specification, of OfficeServ 7070.

CHAPTER 4. Functions of OfficeServ 7070

Describes Call, VoIP, Data, Voice Mail (VM), and Web and System management functions provided by OfficeServ 7070.

ANNEX A. Open Software Announcement

This chapter describes open software used in this product and the open software license agreements.

ABBREVIATION

Describes the acronyms used in this manual.

Page 4

Ошибка! Используйте вкладку "Главная" для применения 제목 8,표준 제목 1 к тексту, который должен здесь

EDITION

DATE OF ISSUE

REMARKS

03. 2009.

First Draft

04. 2009.

Added Turkey RoHS announcement

07. 2009.

Added Modem board description

отображаться.

Conventions

The following types of paragraphs contain special information that must be carefully read and thoroughly understood. Such information may or may not be enclosed in a rectangular box, separating it from the main text, but is always preceded by an icon and/or a bold title.

CAUTION

Provides information or instructions that the reader should follow in order to avoid

a service failure or damage to the system.

NOTE

Indicates additional information as a reference.

Reference

OfficeServ 7070 Installation Manual

This manual describes the prerequisite for the installation of the OfficeServ 7070 system as well as how to install, inspect and operate the system.

Revision History

Page 5

OfficeServ 7070 System Description

TABLE OF CONTENTS

INTRODUCTION I

Purpose ...................................................................................................................................................... I

Document Content and Organization ....................................................................................................... I

Conventions ............................................................................................................................................... II

Reference .................................................................................................................................................. II

Revision History ........................................................................................................................................ II

CHAPTER 1. Overview of OfficeServ 7070 1-1

1.1 Introduction to System .......................................................................................................... 1-1

1.1.1 Main Functions ......................................................................................................................... 1-1

1.1.2 System Architecture ................................................................................................................. 1-3

1.2 Interfaces between VoIP Components ................................................................................. 1-5

1.3 Programming ......................................................................................................................... 1-5

CHAPTER 2. Hardware of OfficeServ 7070 2-1

2.1 Features of Hardware ............................................................................................................ 2-1

2.2 Cabinet Configuration ........................................................................................................... 2-3

2.2.1 Cabinet View ............................................................................................................................ 2-3

2.2.2 Slot Configuration ..................................................................................................................... 2-5

2.3 Boards by Functions ............................................................................................................. 2-6

2.3.1 Control Board ........................................................................................................................... 2-6

2.3.2 Voice Trunk Board .................................................................................................................. 2-13

2.3.3 Voice Station Board ................................................................................................................ 2-18

2.4 Station Phones ..................................................................................................................... 2-23

2.4.1 Regular Phones ..................................................................................................................... 2-23

2.4.2 Digital Phones ........................................................................................................................ 2-23

2.4.3 IP Phones ............................................................................................................................... 2-27

2.4.4 Add On Module ...................................................................................................................... 2-28

2.4.5 Door Phone Interface Module ............................................................................................... 2-29

2.5 Wireless LAN Device ........................................................................................................... 2-30

2.5.1 Wireless LAN Base Station (DUAL Band AP) ...................................................................... 2-30

III

Page 6

Ошибка! Используйте вкладку "Главная" для применения 제목 7,제목 7_목차 к тексту, который должен здесь

отображаться.

2.5.2 Mobile Phone......................................................................................................................... 2-30

2.6 Additional Devices ............................................................................................................... 2-31

2.6.1 On Hold/Background Sound Source .................................................................................... 2-31

2.6.2 External Broadcasting Units ................................................................................................. 2-31

2.6.3 Loud Bell ................................................................................................................................ 2-31

2.6.4 Common Bell ......................................................................................................................... 2-31

2.6.5 WEB Management ................................................................................................................ 2-32

2.6.6 SMDR .................................................................................................................................... 2-32

2.6.7 CTI.......................................................................................................................................... 2-32

CHAPTER 3. Specification of OfficeServ 7070 3-1

3.1 System Capacity ..................................................................................................................... 3-1

3.1.1 Trunk Line Capacity .................................................................................................................3-2

3.1.2 Station (Subscriber) Line Capacity ..........................................................................................3-2

3.1.3 Channel Capacity .....................................................................................................................3-3

3.2 Electrical Specification .......................................................................................................... 3-4

3.2.1 Signal Specification ..................................................................................................................3-4

3.2.2 Transmission Characteristics ...................................................................................................3-6

3.2.3 Line Conditions .........................................................................................................................3-6

3.3 Power Specification ............................................................................................................... 3-7

3.3.1 OfficeServ 7070 System Power ..............................................................................................3-7

3.4 Rings and Tones ..................................................................................................................... 3-8

3.4.1 Ring Cycles...............................................................................................................................3-8

3.4.2 Tones.........................................................................................................................................3-8

3.5 Available Terminals ................................................................................................................ 3-9

CHAPTER 4. Functions of OfficeServ 7070 4-1

4.1 Call Functions ......................................................................................................................... 4-1

4.1.1 Dynamic IP Address Configuration .........................................................................................4-1

4.1.2 VMS Function ...........................................................................................................................4-1

4.2 VoIP Function .......................................................................................................................... 4-2

4.2.1 VoIP Network ............................................................................................................................4-2

4.2.2 VoIP Trunk Interface .................................................................................................................4-2

4.2.3 Proxy Server .............................................................................................................................4-2

4.2.4 Registering Users .....................................................................................................................4-2

4.2.5 SIP Phone Configuration .........................................................................................................4-2

4.2.6 Registering SIP Phones ...........................................................................................................4-3

4.2.7 Call Log .....................................................................................................................................4-3

Page 7

OfficeServ 7070 System Description/Ed.02OfficeServ 7070 System Description/Ed.02

4.2.8 Call Pickup ................................................................................................................................ 4-3

4.2.9 Unconditional Call Forwarding ................................................................................................ 4-3

4.2.10 Busy Call Forwarding ............................................................................................................... 4-3

4.2.11 No Answer Call Forwarding ..................................................................................................... 4-3

4.2.12 Conference ............................................................................................................................... 4-3

4.2.13 Call Park (System Hold) .......................................................................................................... 4-3

4.2.14 Do Not Disturb (DND) .............................................................................................................. 4-4

4.2.15 Call Reservation ....................................................................................................................... 4-4

4.3 VMS Function ......................................................................................................................... 4-4

4.3.1 System Features ...................................................................................................................... 4-4

4.3.2 Auto Attendant .......................................................................................................................... 4-6

4.3.3 Access Manager ...................................................................................................................... 4-8

4.3.4 Voice Mail Features ............................................................................................................... 4-11

4.3.5 Administration Features ......................................................................................................... 4-20

4.3.6 Voice Form Questionnaire Features ..................................................................................... 4-21

4.3.7 E-mail Gate Way Function ..................................................................................................... 4-22

4.3.8 Simple Auto Relay Function .................................................................................................. 4-22

4.4 Web Management ................................................................................................................ 4-23

4.4.1 Web Management Function .................................................................................................. 4-23

ANNEX A. Open Software Announcement A-1

ABBREVIATION I

4 ~ E ............................................................................................................................................................ I

I ~ T ............................................................................................................................................................ II

U ~ W ........................................................................................................................................................ III

Page 8

Ошибка! Используйте вкладку "Главная" для применения 제목 7,제목 7_목차 к тексту, который должен здесь

отображаться.

LIST OF FIGURES

Figure 1.1 Configuration of OfficeServ 7070 Service .............................................................. 1-3

Figure 2.1 OfficeServ 7070 Top View ...................................................................................... 2-3

Figure 2.2 OfficeServ 7070 side view-1 .................................................................................. 2-4

Figure 2.3 OfficeServ 7070 side view -2 ................................................................................. 2-4

Figure 2.4 BMP (MAIN Part) ................................................................................................... 2-8

Figure 2.5 BMP (B8S Part) ................................................................................................... 2-11

Figure 2.6 BMP (B8S Part) Line Connection Part ................................................................. 2-12

Figure 2.7 PRM Board .......................................................................................................... 2-14

Figure 2.8 4TRM Board ........................................................................................................ 2-16

Figure 2.9 2BRM Board Appearance .................................................................................... 2-17

Figure 2.10 4SL2 Board ........................................................................................................ 2-18

Figure 2.11 4DLM Board ....................................................................................................... 2-19

Figure 2.12 E8S Board ......................................................................................................... 2-21

Figure 2.13 E8S Line Connection Part .................................................................................. 2-22

Figure 2.14 Regular Phone ................................................................................................... 2-23

Figure 2.15 DS-24SE ............................................................................................................ 2-23

Figure 2.16 DS-2024E .......................................................................................................... 2-24

Figure 2.17 DS-3020S .......................................................................................................... 2-24

Figure 2.18 DS-4028D .......................................................................................................... 2-25

Figure 2.19 DS-5012L ........................................................................................................... 2-25

Figure 2.20 DS-5014D .......................................................................................................... 2-26

Figure 2.21 DS-5021D .......................................................................................................... 2-26

Figure 2.22 DS-5038D .......................................................................................................... 2-26

Figure 2.23 ITP-5112L .......................................................................................................... 2-27

Figure 2.24 ITP-5114D .......................................................................................................... 2-27

Figure 2.25 ITP-5121D ......................................................................................................... 2-27

Figure 2.26 DS-5064B .......................................................................................................... 2-28

Figure 2.27 DPIM .................................................................................................................. 2-29

Figure 2.28 SMT-R2000 ........................................................................................................ 2-30

Figure 2.29 SMT-W5100 ....................................................................................................... 2-30

Figure 3.1 Trunk Line Loop Start Signaling ............................................................................. 3-4

Page 9

OfficeServ 7070 System Description/Ed.02OfficeServ 7070 System Description/Ed.02

LIST OF TABLES

Table 2.1 Parts on the top of OfficeServ 7070 ........................................................................ 2-3

Table 2.2 Parts on the side of OfficeServ 7070-1 ................................................................... 2-4

Table 2.3 Parts on the side of OfficeServ 7070-2 ................................................................... 2-4

Table 2.4 Mountable Boards for Different Slots ...................................................................... 2-5

Table 2.5 Boards by Functions ............................................................................................... 2-6

Table 2.6 BMP Specification ................................................................................................... 2-7

Table 2.7 BMP (MAIN Part) Configuration .............................................................................. 2-8

Table 2.8 BMP (B8S Part) Configuration ............................................................................... 2-11

Table 2.9 BMP (B8S Part) Ports for External Connections .................................................. 2-12

Table 2.10 PRM Board Configuration ................................................................................... 2-14

Table 2.11 4SL2 Board Configuration .................................................................................. 2-18

Table 2.12 4DLM Board Configuration ................................................................................. 2-19

Table 2.13 E8S Board Configuration .................................................................................... 2-21

Table 2.14 E8S Ports for External Connections .................................................................... 2-22

Table 2.15 AOM Type ........................................................................................................... 2-28

Table 3.1 OfficeServ 7070 Line Capacity ................................................................................ 3-1

Table 3.2 OfficeServ 7070 System Capacity .......................................................................... 3-2

Table 3.3 Trunk Line Capacity ................................................................................................ 3-2

Table 3.4 Station Line Capacity .............................................................................................. 3-2

Table 3.5 Channel Capacity of Slot ........................................................................................ 3-3

Table 3.6 Electrical Characteristics of the PRI Trunk Line ...................................................... 3-4

Table 3.7 Electrical Characteristics of the DLI Line ................................................................ 3-5

Table 3.8 Electrical Characteristics of the LAN Interface (100 BASE-TX) .............................. 3-5

Table 3.9 I/O Voltage of PSU .................................................................................................. 3-7

Table 3.10 System Ring Cycles .............................................................................................. 3-8

Table 3.11 Cycles of the System Tones .................................................................................. 3-8

Table 3.12 OfficeServ 7070 Compatible Terminals ................................................................. 3-9

VII

Page 10

Ошибка! Используйте вкладку "Главная" для применения 제목 7,제목 7_목차 к тексту, который должен здесь

This page is intentionally left blank.

отображаться.

VIII

Page 11

OfficeServ 7070 System Description

CHAPTER 1. Overview of OfficeServ

7070

This chapter describes the features and the main functions of OfficeServ 7070 overall and introduces system structure, interface and programming.

1.1 Introduction to System

OfficeServ 7070 is the most proper communication product for small or medium size offices. Users can enjoy various phone functions and applications at the various platforms such as digital phones, IP phones, and mobile phones.

1.1.1 Main Functions

Main functions and features of OfficeServ 7070 are as follows:

Integrated Communication Environment

OfficeServ 7070 provides the VoIP service by using Local Area Network (LAN) modules as well as the voice call function. Users can conveniently communicate by using wireless/wired integration platforms (Telephones, PCs, Wireless Phones and peripherals) function.

Next Generation Platform

The OfficeServ 7070 provides, through an IP-based feature server, a pure IP solution where the mail server, Session Initiation Protocol (SIP) server and Voice Messaging System (VMS) function. The IP-based feature server uses the Linux platform and allows the user to continually add the feature server modules to be provided in the future.

High Quality IP Phone Function

The OfficeServ 7070 separates the priorities and groupings of data and voice packets to guarantee the following Quality of Service (QoS) in voice calls.

 Layer 2 QoS: Priority Processing (802.1 p), VLAN (802.1 q)

 Layer 3 QoS: CBQ (Class Based Queuing), RTP (Real-time Transmission Protocol)

Priority Queuing, On-Demand Bandwidth management for WAN

1-1

Page 12

CHAPTER 1. Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь

отображаться.

Wireless LAN Service

OfficeServ 7070 provides the wireless LAN solution for wireless/wired complex service in office zone. The data is separated from the voice, and the handoff and QoS functions are supported using a base station (DUAL AP, Access Point) providing services. OfficeServ 7070 uses wireless LAN base station so that OfficeServ 7070 can serve wireless/wired voice/data communication and internet access function. Also, an efficient and convenient working environment can be made at any time or place because sophisticated mobile stations are used for OfficeServ 7070.

A Variety of Application Solutions

OfficeServ 7070 offers a variety of application solutions such as OfficeServ News, OfficeServ EasySet, Internet Call Center, R-NMS, Voice Mail System, Integrated Fax Server, and Digital Integrated Recording Systems.

Integrated and Application Solution

- ‘Integrated’ means that OfficeServ 7070 system inter-works with an external solution server and the system and the server operates as one integrated function.

- For detailed information about how to use each application solution, refer to the

User’s Guide for each application.

Ease of Installation and Expandability

The OfficeServ 7070 has a single cabinet architecture and is installed on a wall. Because of its attractive appearance, it looks good enough to install in an office. The user can expand it by installing multiple service boards additionally into universal slots.

1-2

Page 13

OfficeServ 7070 System Description/Ed.02OfficeServ 7070 System Description/Ed.02

OfficeServ 7070

PRM/4TRM

Ethernet

4DLM

4SL2

IP WAN

Soft Phone

VIDEO IP Phone

IP Phone

WLAN

DGP

SLT

PSTN

1.1.2 System Architecture

The OfficeServ 7070 is composed of the basic cabinet, to be installed on a wall, and the OfficeServ Feature server, to be installed in an external Linux server. The main part (Basic Main Processor, Main Block) of the BMP board, which is the main control block, is installed within the basic cabinet to manage the overall operations of the OfficeServ 7070 and perform the switching, signal processing, and terminal management functions. In addition, the B8S part (Basic Main Processor, 8SLI Block) and E8S board (Extended 8SLI Board) are designed to allow the user to mount various option boards onto them. The service configuration diagram of OfficeServ 7070 system is shown in the figure below:

Figure 1.1 Configuration of OfficeServ 7070 Service

Voice Trunk Part

The voice trunk part is composed of digital and analog trunks. The PRI Module (PRM) provides the Primary Rate Interface (PRI) digital trunk function, sending and receiving voices through a trunk and transmitting 64 kbps data packets per channel.

The 2BRM Module (2BRM) provides the Basic Rate Interface (BRI) digital trunk function for T0 and S0 interfaces. The 4-Port Trunk Module (4TRM) provides the Polarity Reverse Signal (PRS) and Caller ID (CID) Path functions within a board by default.

1-3

Page 14

CHAPTER 1. Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь

отображаться.

Voice Station Part

The voice station part is composed of the Digital Line Interface (DLI), which is a digital station, and the Subscriber Line Interface (SLI), which is an analog station, to provide voice services. Depending on the number of ports and the combination of stations, multiple station boards can be installed. A 4DLM board is used for a digital station and a 4SL2 board an analog station.

Board Abbreviation description

- BMP (MAIN): Basic Main Processor Board (Main)

- BMP (B8S): Basic Main Processor Board (Basic 8SLI)

- E8S: Extended 8 Port SLI Board

- PRM: PRI ISDN interface Module

- 4DLM: 4 Port DLI Module

- 4TRM: 4 Port Trunk Module

- 4SL2: 4 Port SLI Module

- 2BRM: BRI ISDN interface Module

Voice Application Service Part

The voice application module is composed of the Voice over Internet Protocol (VoIP), which transmits voices to the data network, and the Wireless Local Area Network (WLAN), which transmits voices wirelessly. The Media Gateway Interface (MGI) refers to the application that converts voices to data, thus providing the VoIP function. The MGI is supported by the processor by default without requiring any additional module.

Application Configuration

The OfficeServ 7070 has a commercial Linux platform server outside the cabinet and provides the following application software. In contrast, OfficeServ Solution and OfficeServ Admin are installed on a separate server.

 SIP server

 OfficeServ Solution (CTI, OfficeServ Operator)

 OfficeServ Admin (Web Management, OfficeServ EasySet, System Manager)

1-4

Page 15

OfficeServ 7070 System Description/Ed.02OfficeServ 7070 System Description/Ed.02

1.2 Interfaces between VoIP Components

OfficeServ 7070 provides various VoIP interfaces as follows:

 Vo IP Networking

 SIP VoIP Gateway

 SIP Server

 System SIP UA (User Agent)

 IP Telephone

 Standard SIP Telephone

In view of signal processing, the interface interworking standards between VoIP components are as follows:

 Proprietary TCP Inter Process Communication (IPC)

 SIP UA-to-UA

 UA-to-Server

1.3 Programming

The Man Machine Communication (MMC) program can change the data value used for the system operation program. The MMC program is categorized into three levels, which are technician, operator, and subscriber. Depending on these levels, some MMCs can be programmed by the subscribers while some MMCs cannot. A password is required for technician level programming or operator level programming; however, a password is not required for subscriber level programming.

Technician-Level Programming

All programs are programmable. Programming can be made in any stations in OfficeServ system, but the programming can be made only in a station at the same time.

Operator Level Program

The operator can program only the program specified in ‘Specification of Program 802 Operator Program Range’ by a technician. Programming can be made in any stations in the

tenant group, but the programming can be only made in a station at the same time.

Subscriber Level Program

Only subscriber programs are programmable.

1-5

Page 16

CHAPTER 1. Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь

This page is intentionally left blank.

отображаться.

1-6

Page 17

OfficeServ 7070 System Description

CHAPTER 2. Hardware of OfficeServ

7070

This chapter introduces the hardware features, cabinet configuration, and board functions and configuration of OfficeServ 7070 system. In addition, this chapter describes terminals, wireless LAN equipment, and additional equipment available in OfficeServ 7070 system.

2.1 Features of Hardware

The H/W of OfficeServ 7070 has the following features:

Reliability

The materials and parts used for OfficeServ 7070 hardware are robust and satisfy the mechanical and electric features required for communication systems.

 The cabinet of OfficeServ 7070 complies with the industrial standards and is molded

plastics with flame retardant materials.

 OfficeServ 7070 hardware does not generate poisonous or corrosive gas, which might

be harmful for human bodies or affect the system operation.

 OfficeServ 7070 hardware has a failure-tolerance to protect the system from the

damage caused by over-voltage.

 OfficeServ 7070 hardware is designed considering EMI characteristics.

Maintenance

OfficeServ 7070 hardware is designed to be maintained with ease and safety.

 The OfficeServ 7070 is designed to be suitable for wall mounting.

 Because the ports connected to the external are located in the front panel, the installation

and maintenance engineers can connect the cables conveniently.

 There is a Light Emitting Diode (LED) at the front of each module indicating its

operation status and fault status, helping the operator to identify the status of the system easily.

 The electronic devices are designed not to be damaged by the external environment

during installation or maintenance.

2-1

Page 18

CHAPTER 2. Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь

отображаться.

Fire Resistance and Heat Processing

OfficeServ 7070 hardware is made of fire-resistant materials and parts to protect the hardware from fire. OfficeServ 7070 hardware is designed not to affect system performance due to heat generated from inside of the system.

 A specific heat-generated part of the hardware is blocked in order not to affect

temperature-sensitive components.

 The parts installed into the modules are located on the basis of heat distribution.

 A 60 mm cooling fan is installed, which makes the internal air flow out of the system.

2-2

Page 19

OfficeServ 7070 System Description/Ed.02OfficeServ 7070 System Description/Ed.02

Part

Function

RUN LED

CPU operation status

LAN LED

LAN operation status

MEM LED

CPU access status of Flash Memory

PRI LED

Port status

2.2 Cabinet Configuration

2.2.1 Cabinet View

The OfficeServ 7070 is installed on a wall. The system has a single control part (BMP). Various subscriber option boards are mounted onto the BMP (MAIN part), BMP (B8S part) and E8S. The following sections show the appearance of the OfficeServ 7070 system cabinet.

OfficeServ 7070 top view

Figure 2.1 OfficeServ 7070 Top View

The descriptions about each part are listed in the table below.

Table 2.1 Parts on the top of OfficeServ 7070

2-3

Page 20

CHAPTER 2. Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь

Part

Function

Ground Lug

Ground lug for system communications

Power Switch

Switch to turn the OfficeServ 7070 on/off

Power Connector

Connector to use when connecting to the power cable

Part

Function

LAN

LAN port

SIO

Debugging port

MISC

Connector used to connect to an external audio device,

broadcasting device, or shared bell, etc.

P1~P14

General-purpose ports

Installation Record Label

Label to record the installed boards on.

отображаться.

OfficeServ 7070 Side view

Figure 2.2 OfficeServ 7070 side view-1

The descriptions about each part are listed in the table below.

Table 2.2 Parts on the side of OfficeServ 7070-1

Figure 2.3 OfficeServ 7070 side view -2

The descriptions about each part are listed in the table below.

Table 2.3 Parts on the side of OfficeServ 7070-2

2-4

Page 21

OfficeServ 7070 System Description/Ed.02OfficeServ 7070 System Description/Ed.02

Cabinet

Module

Slot

Mountable Board

Basic Cabinet

BMP

(MAIN Part)

LOC1

PRM, 4DLM, 4SL2

LOC2

4DLM, 4SL2

LOC3

Modem

BMP

(B8S Part)

LOC1

4TRM, 4DLM, 4SL2, 2BRM

LOC2

4TRM, 4DLM, 4SL2, 2BRM

LOC3

4TRM, 4DLM, 4SL2, 2BRM

Optional Cabinet

E8S

LOC1

4TRM, 4DLM, 4SL2, 2BRM

LOC2

4TRM, 4DLM, 4SL2, 2BRM

LOC3

4TRM, 4DLM, 4SL2, 2BRM

2.2.2 Slot Configuration

The user can mount up to three (3) option boards on the BMP board (MAIN part), three (3) on the BMP board (B8S part), and three (3) on the E8S board. The option boards that can be mounted within the OfficeServ 7070 depending on its configuration are listed in the table below.

Table 2.4 Mountable Boards for Different Slots

2-5

Page 22

CHAPTER 2. Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь

Function

Board

Main Control Part

BMP: Controls the overall system.

Voice Trunk

PRM (for PRI lines), 4TRM (for analog trunks) , 2BRM (for BRI Lines)

Voice Station

4SL2 (for regular phone lines), 4DLM (for digital phone lines), E8S

Data

Modem (optional)

Voice Application

None (Embedded in the system. Controlled by the software.)

Power and Fan

PSU and Fan (Shipped with installed by default)

отображаться.

2.3 Boards by Functions

OfficeServ7070 has Base board and eight slots to mount daughter board. Each slot can mount the daughter boards that can perform the following function depending on the configuration type of OfficeServ 7070.

Table 2.5 Boards by Functions

2.3.1 Control Board

The Basic Main Processor (BMP) board is composed of the MAIN part and B8S part. The main control block of the system is located in the MAIN part. The subscriber block is located in the B8S part.

2.3.1.1 BMP (MAIN Part)

The BMP (MAIN part) is the control board that controls the main functions of the OfficeServ 7070 and is installed in the system by default. It performs the voice switching, signal processing, subscriber terminal management, VoIP processing, and VM/AA processing functions, etc. In addition, it performs the system booting and data management functions and directly controls various option boards. The BMP (MAIN part) runs various applications through the LAN interface. The connector (RJ45) for physical Ethernet connection is provided from the LAN port installed on the right side of the system.

Main Functions

The BMP (MAIN part) provides the following functions:

 Runs various applications through the LAN interface.

 VM/AA processing

 Controls the secondary storage device (NAND memory).

 Provides a Universal Asynchronous Receiver and Transmitter (UART) port

 Internal/External Music On Hold (MOH), loud/common bell

 Sets and displays the time.

 Codec processing (MGI/VM/AA)

 Time Switch function

2-6

Page 23

OfficeServ 7070 System Description/Ed.02OfficeServ 7070 System Description/Ed.02

Category

Number by type

Sub Total

Total number

Trunk

Analog trunk

PRI trunk

BRI trunk

SIP trunk

SPNet port

Station

Regular phone

Digital phone

Samsung IP phone

Samsung WiFi phone

SIP phone

Others

AA port (G.711)

VM port (G.711)

MGI port (G.729)

Mobex

CHAPTER 3. Specification of

OfficeServ 7070

This chapter describes the capacity of OfficeServ 7070, various signal specification, power specification, rings and tones, compatible boards and terminals, and equipment specifications.

3.1 System Capacity

Up to 58 lines can be installed and operated in OfficeServ 7070 system, and the line ratio

of the station and trunk line can be adjusted within the capacity depending on the users’

needs. Table below shows the maximum line capacity of OfficeServ 7070.

Table 3.1 OfficeServ 7070 Line Capacity

3-1

Page 50

CHAPTER 3. Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь

Module

Maximum Line Capacity

Basic cabinet

- Four (4) DLI ports: BMP (MAIN part) base (default installation board)

- Eight (8) SLI ports: BMP (B8S part) base

- Four (4) ATRK ports: BMP (B8S part) base

- PRM: One (1) is installed at the BMP (MAIN part) LOC1.

- 4DLM: Up to five (5) can be installed on the BMP (MAIN part) and

BMP (B8S part).

- 4SL2: Up to five (5) can be installed on the BMP (MAIN part) and

BMP (B8S part).

- 4TRM: Up to three (3) can be installed on the BMP (B8S part).

E8S

- 4TRM: Up to three (3) can be installed on the BMP (B8S part).

- Eight (8) SLI ports: E8S Base

- 4DLM: Up to three (3) can be installed.

- 4SL2: Up to three (3) can be installed.

- 4TRM: Up to three (3) can be installed.

PRM

PRI 30 lines

4TRM

ATRK 4Port

4DLM

DLI 4Port

4SL2

SLI 4Port

2BRM

BRI 4 lines

System Configuration

Analog

Digital

LOOP TRK

T1 TRK

E1 TRK

PRI TRK

Basic cabinet

16 - -

E1: 30

Basic cabinet +E8S

28 - -

E1: 30

System Configuration

Regular Phones

Digital Phones

Basic cabinet

Basic cabinet +E8S

отображаться.

Table 3.2 OfficeServ 7070 System Capacity

3.1.1 Trunk Line Capacity

The maximum trunk line capacity of OfficeServ 7070 based on its configuration is shown in the table below:

Table 3.3 Trunk Line Capacity

3.1.2 Station (Subscriber) Line Capacity

The maximum station line capacity for regular phones and digital phones in OfficeServ 7070 based on its configuration is shown in the table below:

3-2

Table 3.4 Station Line Capacity

Page 51

OfficeServ 7070 System Description/Ed.02OfficeServ 7070 System Description/Ed.02

Item

Slot

Channel

Basic cabinet

BMP (MAIN Part) Slot1, 2

BMP (B8S Part) Slot 1, 2, 3

Expansion cabinet

E8S Slot 1, 2, 3

CID Receiver

For Basic cabinet

DTMF Receiver

For Basic cabinet

3.1.3 Channel Capacity

The number of channels and the numbers of CID and DTMF receiver channels are shown in the table below:

Table 3.5 Channel Capacity of Slot

3-3

Page 52

CHAPTER 3. Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь

Category

Specification

Transmission speed

2048 Kbits/s ±50 ppm

Code

HDB3 (High Density Bipolar of Order 3)

Pulse type

Regular square wave: When indicating all valid signals,

comply with the mask (I.403) regardless of the codes.

Nominal and pulse

244 ns

Transmission media

A pair of twisted lines

Load resistance

120 Ω

Indicated (pulse) nominal peak voltage

3.00 V

Blank (No Pulse) Peak Voltage

0 ±0.300 V

OPEN END

CLOSED END

T R T R GND

-48 VDC

(C.O.)

Key Telephone

отображаться.

3.2 Electrical Specification

3.2.1 Signal Specification

The signal processing protocol means the methods for connecting signals between the trunk lines, stations and system, and also means the method of providing the status information.

3.2.1.1 Trunk Line Signaling

Loop Start

In processing loop start signals, the on-hook and the off-hook statuses are controlled by the flow of electric current. The loop is a closed loop trunk circuit or a standard 2500-type set loop.

Figure 3.1 Trunk Line Loop Start Signaling

Characteristics of the ISDN Interface Transmission

The electrical characteristics of the ISDN (PRI) interface comply with the ITU I.430 and ETS 300 012 standards.

Table 3.6 Electrical Characteristics of the PRI Trunk Line

3-4

Page 53

OfficeServ 7070 System Description/Ed.02OfficeServ 7070 System Description/Ed.02

Category

Specification

Transmission speed

384 Kbits/s

Code

AMI (Alternate Mark Inversion)

Pulse type

Typical AMI Waveform

Category

Specification

Transmission speed

100 Mbps

Transmission code

The 4B/5B+MLT-3 (4 bit/5 bit) is the method used to convert and

encode 4-bit data to 5-bit data in the physical layer. The Multi

Level Transmission-3 (MLT-3) is the method used to encode the

sending data into three (3) levels (high, middle, and low).

Access control method

CSMA/CD

Transmission media

UTP CAT5, STP

Number of the UTP pairs

2 pairs

Characteristic resistance

100 Ω

Cable thickness

Diameter 0.51 mm (24 AWG), External diameter 6 mm

The electrical characteristics of the Digital Line Interface (DLI) are shown in the table below.

Table 3.7 Electrical Characteristics of the DLI Line

3.2.1.2 LAN Signaling

The electrical characteristics of the 10 BASE-T, which complies with the IEEE 802.3 standard, are shown in the table below. The basic OfficeServ 7070 system supports only 100 Mbps to guarantee the connection status of the VoIP line.

Table 3.8 Electrical Characteristics of the LAN Interface (100 BASE-TX)

3.2.1.3 Station Signaling

Dial Pulse Signaling

 Ratio: 10 Pulse Per Second (PPS)

 Make/Break Ratio (M/B ratio): 33 %/66 % (It can be adjusted by the software.)

 The minimum signaling time between digits: 20 ms (It can be adjusted by the

software.)

DTMF Push Button Dialing

The DTMF signal processing complies with the ITU standard, which enables the user to send/receive the signals of digital phones through the trunk line and to process the signals of regular phones.

3-5

Page 54

CHAPTER 3. Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь

отображаться.

3.2.2 Transmission Characteristics

 Attenuation

 Attenuation between subscribers: Less than 6 dB  Attenuation between the subscriber and local trunk line: Less than 0.5 dB

 Characteristic resistance of the line: 600 Ω

 Weighted noise: Less than -65 dBm

 Crosstalk attenuation: Less than -68 dBm

 Frequency band: 300~3400 Hz

 Insulation resistance: More than 1 MΩ

3.2.3 Line Conditions

 Length for installation:

 Regular phones: Up to 1 km (When the AWG #24 cable is used)  Digital phones: Up to 400 m (When the AWG #24 cable is used)  Door phones: Up to 400 m (When the AWG #24 cable is used)  AOMs: Up to 400 m (When the AWG #24 cable is used)

 Leakage resistance between lines: More than 20 KΩ

 Leakage resistance between grounds: More than 20 KΩ

3-6

Page 55

OfficeServ 7070 System Description/Ed.02OfficeServ 7070 System Description/Ed.02

Power Supply Devices

Specifications

Power Supply Unit (PSU)

Input power

- AC 200~240 V, 3 A, 50/60 Hz

- DC 48 V, 4 A

output power

- DC -55 V, 1.7 A

- DC +5 V, 4 A

- DC -54 V, 0.4 A (For backup)

3.3 Power Specification

3.3.1 OfficeServ 7070 System Power

OfficeServ 7070 operates by AC input power or battery power. PSU (Power Supply Unit) supplies the system with the power of -55 V, +5 V and backup power of -54 V (BAT).

Table 3.9 I/O Voltage of PSU

3-7

Page 56

CHAPTER 3. Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь

Rings

ON/OFF Cycles

Trunk line ring

1000/3000 ms

Station ring

400/200/400/3000 ms

Door ring

400/200/400/200/400/2000 ms

Alarm ring

400/200/400/200/400/200/400/1000 ms

Tones

ON/OFF Cycles

Dial tone

1000/250 ms

Busy Tone

500/500 ms

Do Not Disturb tone

250/250 ms

Ring Back tone

1000/2000 ms

Call Park tone

Continuous

Confirmation/Caution/Barge-In tone

50/50 ms

Call Back/Hold tone

500/3500 ms

Ring tone

1000/2000 ms

Error/Number Unobtainable tone

250/250 ms

Message Camp On tone

Continuous

отображаться.

3.4 Rings and Tones

3.4.1 Ring Cycles

OfficeServ 7070 provides the trunk line rings, station rings, door rings, and alarm rings. The ON/OFF cycle of each ring is shown in the table below:

Table 3.10 System Ring Cycles

Ring ON/OFF Cycle

The ON/OFF cycle can be adjusted by changing the values of the system

database

3.4.2 Tones

The output voltage and the frequency of the ring signals in OfficeServ 7070 are as follows:

 Output voltage: 75 V

 Frequency: 20 Hz

OfficeServ 7070 provides the users with various tones to notify the users of the status of functional operation and give feedback to the users. The ON/OFF cycles of currently specified tones are shown in the table below.

Table 3.11 Cycles of the System Tones

3-8

Page 57

OfficeServ 7070 System Description/Ed.02OfficeServ 7070 System Description/Ed.02

Types

Terminals

ITP-5100 series IP phones

ITP-5114D, ITP-5121D, ITP-5112L

WLAN (Wireless LAN device)

SMT-W5100 (Mobile Station)

DSS

DS-64B

Digital phones

DS-5000 series (DS-5014D, DS-5021D, DS-5038D, DS-5012L),

DS-4000 series, DS-24SE, DS-24D, DS-2024E, DS-2021E,

DS-3020S

AOM

DS-5064BAOM, DS-4014AOM, DS-4064AOM,

DS-24SE AOM, DS-2024EAOM, DS-3020SAOM

Others

DPIM, door phone

3.5 Available Terminals

The terminals available to OfficeServ 7070 are shown in the table below.

Table 3.12 OfficeServ 7070 Compatible Terminals

Compatible Terminals

All the compatible terminals of iDCS 500 Premium system are available to

OfficeServ 7070. Since the compatible terminals can be changed depending on system settings, contact the system administrator.

3-9

Page 58

CHAPTER 3. Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь

This page is intentionally left blank.

отображаться.

3-10

Page 59

OfficeServ 7070 System Description

CHAPTER 4. Functions of OfficeServ

7070

This chapter describes the functions of OfficeServ 7070 related to calls, VoIP, VMS, and web system management.

4.1 Call Functions

OfficeServ 7070 processes station calls, trunk line calls, application calls, or various signals through the PSTN and VoIP networking.

4.1.1 Dynamic IP Address Configuration

IP Phone Configuration

IP phones or SIP phones registered to OfficeServ 7070 also can be operated by the dynamic allocation of IP address from the DHCP and also can set IP address manually.

4.1.2 VMS Function

Interoperation of the Auto attendant and Mailbox

Provides the Auto attendant and mailbox functions through the VMS.

Notification via Email

Each voice message the VMS receives is converted to a wav file and sent to the email account registered in the VMS as an attachment.

4-1

Page 60

CHAPTER 4. Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь

отображаться.

4.2 VoIP Function

The VoIP function refers to the function that the SIP server performs. The SIP server is a software module that operates on the feature server. Based on the standard SIP protocol, it provides the gateway function for smooth signal processing between the existing phones and standard SIP user devices. In addition it provides the function that allows the standard SIP user devices to interoperate with the OfficeServ 7070 phones.

4.2.1 VoIP Network

Because the MGI module embedded in the OfficeServ 7070 is used when calling other system through VoIP networking, no separate MGI board is needed. However, for the number of channels needed to meet user requirements, a separate license is required.

4.2.2 VoIP Trunk Interface

The OfficeServ 7070 provides a VoIP trunk interface (SIP). The OfficeServ 7070 controls calls and establishes a communication path through the embedded MGI module.

4.2.3 Proxy Server

The OfficeServ 7070 operates as an SIP device controller to allow the standard SIP devices (user agents) specified by the RFC3261 SIP standard to interoperate with the OfficeServ

7070’s call service. It operates as a proxy server to perform the routing operations for call

processing requests received from an SIP device, such as call setup, canceling and release. In addition, it performs the status management for SIP devices and a smooth call service between SIP devices.

4.2.4 Registering Users

An SIP interface user is identified by an SIP address in an email address format. The user registration function stores and manages the IP address and priority of the current user for a specified period of time. Then it provides this user information when another user, authenticated through the authentication procedure, requests it.

4.2.5 SIP Phone Configuration

If the user configures a standard SIP phone so that it can be used as an OfficeServ 7070 phone and enters its phone number and user ID in the call server, the SIP server creates a configuration file for it. If the user then operates it, the configuration data required at the initial stage is downloaded into the TFTP. This configuration file contains the OfficeServ 7070 system phone number, user name, and codec information, etc. assigned to the user’s SIP phone and is used to configure the user’s SIP phone.

4-2

Page 61

OfficeServ 7070 System Description/Ed.02OfficeServ 7070 System Description/Ed.02

4.2.6 Registering SIP Phones

Once the user registers external standard SIP phones as OfficeServ 7070 phones, call processing services are provided using the assigned OfficeServ 7070 phone numbers between SIP phones, between SIP phones and digital phones, and between SIP phones and PSTN trunks.

4.2.7 Call Log

The call processing logs generated on an SIP phone are saved as a file. Then this is sent to and managed by an external system management package.

4.2.8 Call Pickup

When a call is received by an SIP phone and it rings, the user can take the call from other phone. After the other phone connects, the phone that is ringing is disconnected.

4.2.9 Unconditional Call Forwarding

When an SIP phone with the Unconditional Call Forwarding function enabled receives a call, the call is automatically forwarded to the phone specified as the call forwarding target. This is regardless of the status of the SIP phone.

4.2.10 Busy Call Forwarding

The call server always monitors the status of SIP phones through the SIP server. When the Busy Call Forwarding function is enabled on an SIP phone and a call is received by it while it is busy, the call is forwarded to the phone specified as the call forwarding target.

4.2.11 No Answer Call Forwarding

When the No Answer Call Forwarding function is enabled on an SIP phone, and a call is received where the user cannot answer after a specified period of time, the call is forwarded to the phone specified as the call forwarding target.

4.2.12 Conference

A conference can be initiated easily, allowing the user to ‘hold’ a current call and then connect the call to join another user. The ad-hoc method is supported, once a conference is initiated the user can invite other users to it continually, one-by-one, while still keeping the conference call active.

4.2.13 Call Park (System Hold)

A current call can be put on ‘hold’ by the system. Then the user can resume that ‘held’ call

with other phone. This held call can then be resumed on another phone.

4-3

Page 62

CHAPTER 4. Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь

отображаться.

4.2.14 Do Not Disturb (DND)

All calls received to the SIP phone which then enables the DND function are disconnected.

4.2.15 Call Reservation

When the user makes a call and the receiving phone is busy, the phone can be reserved. Then when the busy phone is released, the call the user reserved can proceed. Both users’ phones will ring and the call is connected when both users respond.

4.3 VMS Function

Because the Voice Messaging System (VMS) of the OfficeServ 7070 is embedded in software, no physical interface is required. Therefore, this creates an advantage in price.

4.3.1 System Features

Caller ID Compatible

Caller ID Compatible If you subscribe to Central Office based Caller ID, OfficeServ 7070 Voice Mail is compatible. The Caller ID data appearing on keysets is also saved in your voice mail box for each message you receive. This can be used for call back or simply to identify the caller.

Flexible Numbering Plan

An organization can assign an extension, a mailbox, or an announcement to any identification number from one to ten digits. All of these resources can share the same identification numbering plan without conflict. For example, an organization can have, in one OfficeServ 7070 Voice Mail System, an extension numbered 123, a mailbox numbered 123 and an announcement numbered 123. In addition, OfficeServ 7070 Voice Mail can distinguish between variable length identification numbers beginning with the same digit, such as extension number 1, or 12, or 1234567890.

Keyset Display and Soft Key Support

If you have a display keyset the number of new messages will be displayed on it. The display will also echo many of the options available. You will be able to negotiate through the OfficeServ 7070 Voice Mail menus using the keyset display and the soft keys below the display to respond to the prompts.

MOH Supply

Music or announcements may be recorded in the OfficeServ 7070 Voice Mail memory and used by the phone system for Music On Hold. The recorded announcement or music will play in a continuous loop and may be used to provide custom on hold announcements or promotional messages.

4-4

Page 63

OfficeServ 7070 System Description/Ed.02OfficeServ 7070 System Description/Ed.02

Multiple Mailbox Support

The OfficeServ 7070 Voice Mail can, in principle, support up to 1000 mailboxes, although obviously having only the 4 port hardware places practical limits on the system according to the individual system traffic, and type of application.

Operating Mode-Oriented Call Processing

The OfficeServ 7070 Voice Mail can be configured to automatically change between up to 99 different customer operating modes, based upon the time of day, day of week, or specific calendar date. During an operating mode, every aspect of the call automation application, including port utilization, caller scripts, routing solutions, and call coverage options can be customized to meet the organization’s operating requirements. OfficeServ 7070 Voice Mail Schedule Table automatically changes to the correct mode without human involvement.

Operating Mode Override

Under exceptional circumstances, such as adverse weather conditions or other organizational emergencies when the office may be inaccessible, the administrator can override the Schedule Table. The administrator calls the OfficeServ 7070 Voice Mail, enters the administrative password, and selects a new operating mode for any or all ports. The new operating mode can be programmed for the circumstances, or the administrator can simply record a new company greeting which explains the circumstances to callers.

Recordable System Prompts

Although the OfficeServ 7070 Voice Mail contains all the spoken prompts to provide an operational system, some people may want to add or record some additional prompts. This can easily be done using the built in voice studio. Any prompt in the system can be recorded.

Schedule Table

The schedule table automatically controls system mode by individual ports, time of day, day of week and calendar date without human intervention. It is capable of scheduling ninety-nine mode changes per day for 366 consecutive days. The administrator can manually override the schedule table at any time from a touchtone telephone, or from the web management. For Holidays and Calendar of Events, the Schedule Table can be used to schedule holiday and special event caller prompts to better inform and serve callers.

Synchronized Clock

The OfficeServ 7070 Voice Mail clock is responsible for providing each message with a date and time stamp. This clock is always synchronized with the phone system, as is changing between day and night modes.

4-5

Page 64

CHAPTER 4. Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь

отображаться.

4.3.2 Auto Attendant

Alphabetic Directory (Multiple)

Callers who do not know an extension number in the system but do know a name, may

enter the first few letters of the person’s name and be transferred. This system may even be

used internally if an extension number is not known. The OfficeServ 7070 Voice Mail allows for over 1000 unique directory systems, each one can search on either the first or last name.

Auto Attendant Routing

The Auto Attendant can transfer or route callers based on the digits they enter. Callers may be transferred to station, groups or the system directory to select a subscriber based on their name. In addition, the Auto Attendant will integrate the Q&A system or Audio-text system in the future.

Automatic After Hours Answering

The Main Auto Attendant greeting for the OfficeServ 7070 Voice Mail changes from the day to the night greeting automatically when the phone system changes from day to night mode. Multiple additional modes may be defined for special applications.

Announce Hold Position

If callers are allowed to hold for a busy extension, the OfficeServ 7070 Voice Mail is able to intermittently inform the caller of their place in the queue.

Announce Hold Time

If callers are allowed to hold for a busy extension, the OfficeServ 7070 Voice Mail is able to intermittently inform the caller of the estimated hold time before being answered.

Camp On Support

Each station user on the system may decide if they want the OfficeServ 7070 Voice Mail to transfer additional calls to them if they are on the phone. Calls transferred to a busy station,

if unanswered will be sent to voice mail or any other destination according to the user’s

needs.

Direct to Mailbox

You may have mailboxes on the OfficeServ 7070 Voice Mail system that do not have associated stations. This is ideal if you have a small number of employees in your office but numerous employees outside the office that need to keep in contact.

4-6

Page 65

OfficeServ 7070 System Description/Ed.02OfficeServ 7070 System Description/Ed.02

Holidays and Special Events

When your business closes because of a holiday or special event the OfficeServ 7070 Voice Mail can provide a special appropriate prompting to your callers. You may create specific holiday schedules so that this process becomes automatic.

Incoming Call Overflow

The OfficeServ 7070 Voice Mail may be programmed to answer any or all lines immediately or answer only the calls that your operator does not pick up. Overflowed calls may be routed to either a mailbox or the main company prompt.

Interruptible Voice Prompts

At any time during an announcement or greeting, callers may dial a selection and the OfficeServ 7070 Voice Mail will immediately respond. It is not necessary to listen to all the options if you are a ‘power user’ and know what you are doing.

Maximum Greeting Length

The user can also set a different maximum greeting length for a different group of people.

For example, a limit of 3 minutes can be set for a salesperson’s greeting, 5 minutes for the

purchasing department personnel, 2 minutes for the production department personnel, etc.

Multiple Call Handling

The OfficeServ 7070 Voice Mail Module can answer and process up to 8 calls simultaneously.

Multiple Language Support

The VM supports multiple languages. The caller can select his language when making a call and can continue to speak using the selected language while talking. For each mailbox, a default language can be set. Each caller can use his own specific language. To find out about available languages, consult Samsung Electronics.

Operator Access

Callers may connect with an available operator any time by dialing 0.

Single Digit Call Routing

A menu processor can be configured to recognize single digit routing options, or use the same digit as the leading entry of a multi-digit routing option. For example, in the menu processor, ‘1’ can be used to route a caller to the sales department and ‘103’ to transfer the caller to a subscriber’s extension.

4-7

Page 66

CHAPTER 4. Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь

отображаться.

4.3.3 Access Manager

The Access Manager can decide whether to allow a caller to access an individual user. Using the Access Manager, this can be set so that the user’s extension number does not ring. Another option is to search for a call before the phone system answers it or connects it to another extension number. All of these conditions can be set for a specific period of time. The VM can enable the ‘Find Me’ function to access the users located in various places.

Call Blocking

While a subscriber has call blocking set active, the OfficeServ 7070 Voice Mail does not

attempt to transfer a caller to the subscriber’s extension. Instead, it immediately plays the subscriber’s Call Blocking Greeting-if recorded. If the Call Blocking Greeting is not recorded, OfficeServ 7070 Voice Mail plays the subscriber’s Primary No-Answer Greeting

- if recorded. When that greeting is not recorded, OfficeServ 7070 Voice Mail advises the caller that the called party is not available and offers to the caller additional options. A subscriber sets Call Blocking active through Access Manager Services. After activating Call Blocking, the subscriber is prompted to indicate how long blocking is to remain active. This feature can be activated for a number of hours, 1 to 9, for the end of the current business day, for the beginning of the next business day, for a day of the coming week, for Monday through Sunday, for a specific date, for hour and minute, or until further notice.

Call Forwarding

Forward All Calls allows a subscriber to have their incoming calls answered by an associate at another internal extension-it is not used to forward calls to an external telephone number. To have calls connected an external number, the subscriber use the Designated Location Service.

When calls are forwarded to another associate’s extension, a caller entering the forwarder’s extension number will immediately hear ‘Transferring to ‘Called Party’s Name’. Calls are being forwarded to ‘Associate’s Name’. If the associate answers the call, the

associate will be prompted as to who the call is forwarded from. This feature can be activated for a number of hours, 1 to 9, for the end of the current business day, for the beginning of the next business day, for a day of the coming week, for Monday through Sunday, for a specific date, for hour and minute, or until further notice.

Day/Night Personal Greeting

The Night Personal Greeting works in conjunction with the subscriber’s Weekly Availability Schedule. During the defined availability period the OfficeServ 7070 Voice Mail will automatically play the Primary No-Answer Greeting to callers, unless the subscriber is busy on another call and has recorded a Busy Greeting or Call Blocking is set active, and a Call Blocking Greeting is recorded. During the time periods a subscriber is not scheduled available to take calls, and does not

have Call Blocking activated, OfficeServ 7070 Voice Mail plays the subscriber’s Night

Greeting if recorded.

4-8

Page 67

OfficeServ 7070 System Description/Ed.02OfficeServ 7070 System Description/Ed.02

Find Me

When Find Me is set active, the OfficeServ 7070 Voice Mail attempts to deliver calls to the

subscriber’s designated location. The OfficeServ 7070 Voice Mail first tries to locate the subscriber at the subscriber’s designated location. Then, if necessary, it tries each of the subscriber’s Stored Telephone Numbers until all numbers have been called. After each

stored telephone number, the OfficeServ 7070 Voice Mail will prompt the caller that it is continuing to locate the subscriber. If OfficeServ 7070 Voice Mail cannot locate the subscriber, the subscriber’s Call Blocking Greeting is played to the caller. This feature can be activated for a number of hours, 1 to 9, for the end of the current business day, for the beginning of the next business day, for a day of the coming week, for Monday through Sunday, for a specific date, for hour and minute, or until further notice.

Follow Me (Off Premises Transfer)

Each subscriber may have their calls automatically forwarded to a designated location.

It is called ‘the subscriber’s Designated Location’. A Designated Location can be an

internal extension or an external telephone number. It can be entered digit-by-digit or the subscriber can enter a Stored Telephone Number Index Digit representing the location of the appropriate number. Whenever a subscriber sets his designated location to a number other than his extension

number, OfficeServ 7070 Voice Mail prompts, ‘How long do you want this number to be your designated location?’. This feature can be activated for a number of hours, 1 to 9, for

the end of the current business day, for the beginning of the next business day, for a day of the coming week, for Monday through Sunday, for a specific date, hour and minute, or until further notice.

Hold for Busy Station

The OfficeServ 7070 Voice Mail may be enabled to allow callers to hold for a busy station. When a caller elects to hold, the OfficeServ 7070 Voice Mail places the caller in a Hold Queue. If additional callers attempt to reach the busy extension and they choose to hold, they can be informed of their position in the queue and the estimated hold time before being connected. Callers given the option to hold may be limited to insure that system ports are not monopolized. When the limit is reached, callers can be routed to other extensions or applications that have been configured to deal with this condition.

Multiple Personal Greetings (9)

When a subscriber does not answer and accept a call, the OfficeServ 7070 Voice Mail will answer. OfficeServ 7070 Voice Mail recognizes five different reasons why a subscriber does not answer a call. We refer to these reasons as ‘Call Coverage Conditions’. OfficeServ 7070 Voice Mail allows a subscriber to assign a different personal greeting to each Call Coverage Condition. A condition should be considered a ‘socket’ into which a

personal greeting is plugged. The greeting that gets plugged into each ‘socket’ should offer

caller options appropriate for that condition. OfficeServ 7070 Voice Mail provides each subscriber nine (9) personal greetings, labeled 1 through 9.

4-9

Page 68

CHAPTER 4. Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь

отображаться.

A subscriber can assign (plug in) any greeting to any Call Coverage Condition. However, when a subscriber first logs on to the OfficeServ 7070 Voice Mail, personal greetings numbered 1, 2, 3, 4, and 5, are assigned to their respective Call Coverage Conditions (No Answer, Busy, Fwd All/DND, Night and Call Screening). The remaining four personal greetings, labeled 6 through 9 are normally used as alternatives to the greetings assigned to these conditions.

Park and Call

The VM provides the Park and Call function for users who frequently leave their desk.

When a user does not answer a call, the option that the user’s personal greeting is played

can be utilized. If the caller chooses to call the user, the VM saves the call and plays the

personal greeting through the overhead call function, including the user’s name and pickup

code. The VM then waits for the set time, in which the user is expected to answer the call. If the call is not answered, the VM notifies the caller of it and plays the user’s mailbox greeting.

Stored Telephone Numbers

A subscriber can store up to five telephone numbers where they can usually be reached, this simplifies the follow me feature as it allows the subscriber to quickly activate commonly used settings.

Weekly Availability Schedule

The Weekly Availability Schedule tells OfficeServ 7070 Voice Mail the days of the week, and the hours of the day, that a subscriber is normally available to take calls. When the subscriber does not answer a call during those time periods, the appropriate Day or Night greeting is played. This schedule may be set by the Administrator or the Subscriber.

4-10

Page 69

OfficeServ 7070 System Description/Ed.02OfficeServ 7070 System Description/Ed.02

4.3.4 Voice Mail Features

Auto Answering Function

This function can monitor calls left in the voice mailbox using the speaker of a phone. This function is similar to the Hide Call function of an auto answering device.

Auto Conversation Record

With the OfficeServ 7070 Voice Mail card installed in your phone system, you may record all the phone conversations for specific extensions. An optional tone with a programmable delay may be played to alert callers and employees during the recording process. When calls are recorded, any mailbox settings that would normally effect maximum message duration are ignored.

Call Record utilizes the conference feature

The number of people who can use the CR feature simultaneously, is limited to

the number of available conference circuits in the system.

Caution for legal use

Before using this feature, make sure that you are not violating any state or federal

laws. Some states require that the recorded party be notified. Samsung Electronics is not responsible for any illegal use of this feature.

Auto Forward

The Message Auto Forward allows messages left in one mailbox to be automatically forwarded to another mailbox if the message is not listened to. The delay time before the message is forwarded is programmable between 00:00 (immediately) and 23:59 (1 day). After the message is forwarded it may be deleted or saved in the original mailbox. The forwarded message, when accessed by the receiving subscriber, will play this message was forwarded from ‘subscriber recorded name’.

Auto Log In

When calling Voice Mail, the system can correctly identify you as the caller and ask for your password (optional).The benefit of this is that you do not have to identify yourself to the OfficeServ 7070 Voice Mail, it knows who is calling and what mailbox you want to access.

Auto Message Play

Each subscriber may choose to select messages to play (new or old) or may configure their mailbox to automatically play new messages. This is useful if you are in a situation where keystrokes must be kept to a minimum.

4-11

Page 70

CHAPTER 4. Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь

отображаться.

Broadcast

If authorized, a Subscriber can broadcast a message to everyone in the system. Any or all of the subscribers can be given this option.

Call Back

When listening to your voice mail messages you may press one key to automatically call back the person who left you the message, this call back feature may be allowed for internal calls and/or external calls. Long distance may be either allowed or denied and specific area codes may be allowed or denied. For external calls, Caller ID is used and therefore must be received from the phone company.

Call Forward to Voice Mail

Any station on the phone system may be forwarded to the Voice Mail voicemail. Forwarding types are Forward All Calls, Forward Only When Busy, Forward Only When No Answer, or Forward When either Busy or No Answer.

Call Record

With the Voice Mail card installed in your phone system, you may record conversations in progress. Simply press a button to record the current conversation in your mailbox or any other mailbox. An optional tone with a programmable delay may be played to callers during the recording process. When calls are recorded, any mailbox settings that would normally effect maximum message duration are ignored.

Call Record utilizes the conference feature. The number of people who can use

the CR feature simultaneously, is limited to the number of available conference circuits in the system.

Caution for legal use

Before using this feature, make sure that you are not violating any state or federal

laws. Some states require that the recorded party be notified. Samsung Electronics is not responsible for any illegal use of this feature.

Call Back Request Messages

Messages left by and for subscribers may be flagged as Call Back Requested. The caller can enter a specific number that will allow the subscriber to return the call by pressing one key.

Date and Time Stamp

Each message you receive will be stamped with the time and date of its arrival. This information may be played to the subscriber before each message or may be played only on demand. Each individual subscriber may set this option.

4-12

Page 71

OfficeServ 7070 System Description/Ed.02OfficeServ 7070 System Description/Ed.02

Delivery Imperative

When a message is designated as Delivery Imperative, the Voice Mail will take extra steps

to deliver it. The recipient’s pager will be called and then each of his stored telephone

numbers will be tried.

Direct Messaging/Quick Memo

This feature makes it easier to leave messages for others in the office. It allows the user to access mailboxes without dialing the extension number first.

Distribution Lists

Lists of mailboxes may be set up and given a simple numeric identity. Subscribers may use these lists to easily leave or transfer messages into multiple mailboxes simultaneously. This list can include any number of subscriber mailboxes and other lists. The Voice Mail does not limit the number of lists that a subscriber can access. When a message is sent to a list, each mailbox on the list receives a copy. The Voice Mail’ unique message management facilities make the process of distributing a copy to each mailbox on the list immediate, even for very large lists.

Extended Prompting

With Extended Prompting set active, the Voice Mail offers all prompts for the menu the subscriber has accessed. When Extended Prompting is not set active, the Voice Mail offers

only the name of the menu the subscriber is accessing and the prompt ‘For additional options, press 0’.

External Number Notification

When you have messages in your mailbox, you may be alerted at your cell phone, home phone or any other phone. The Voice Mail will make 3 attempts to contact you. If it encounters a busy signal it will try again in 5 minutes, if it encounters a no answer it will try again in 15 minutes.

Notification via External Pager

If a message is received in the voice mailbox, a signal is sent to the registered pager. The voice mailbox number is displayed on the screen of the pager. The VM tries this three times. If the pager is busy, it tries again after 5 minutes. If there is still no response, it tries again after 15 minutes.

4-13

Page 72

CHAPTER 4. Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь

отображаться.

Future Delivery

When a subscriber leaves a Self Memo (Reminder), Direct Message (Quick Memo) or any other message for another subscriber, a future delivery date may be specified.

This is particularly useful if you use the ‘reminder’ feature as a virtual ‘to do’ list. Delivery

Scheduling options are: for a number of hours, 1 to 9, for the end of the current business

day, based on the subscriber’s current availability schedule, for the beginning of the next business day, also based on the subscriber’s current availability schedule, for a day of the

coming week, for Monday through Sunday or for a specific date, for hour and minute. Also for any message not yet delivered, a subscriber can review, modify and discard future delivery messages sent, but not yet delivered.

Group and Sort Messages Prior to Play

A subscriber can group for playback either new or saved messages. Grouping categories are, Urgent, Callback Request, Reminders, Fax Messages, Messages from a Specific Sender, or Private Messages.

Individual Mailbox Greeting

Each mailbox has its own associated individual greeting recorded in the subscriber’s (mailbox owner’s) voice. This may be changed as frequently as you desire.

Individual Mailbox Name

Each mailbox has its own associated individual name recorded in the mailbox owner’s voice.

Individual Mailbox Password

Each mailbox has its own associated individual password selected by the user or system administrator. This provides some security and prevents unauthorized access. The password may be up to 8 digits long.

Individual Voice Mailbox and Extension Number

Each extension number and mailbox is a separate and independent system resource. In the VM, the user cannot define a mailbox by using an extension number or vice verse. One user’s mailbox number may not be the same as the user’s extension number. One user might have several extension numbers within the system. For the messages of one department, each extension number is connected to a mailbox so that messages can be received. Extension numbers can have a different mailbox by day or week for a department, if staff change location.

Maximum Number of Messages

The maximum number of messages a mailbox will hold is 9,999. The maximum number of messages can be set for each mailbox.

4-14

Page 73

OfficeServ 7070 System Description/Ed.02OfficeServ 7070 System Description/Ed.02

Message Address Verification

After entering the mailbox number to which a message is being sent, the Voice Mail echoes the name of the recipient, confirming the message is going to the intended subscriber. The address verification is also played when the subscriber forwards an existing message.

Message Counter

Whenever you access your mailbox, you are told the number of new and old messages. You may selectively listen to the new or the old messages.

Message Delete

When a message has been heard, you may delete it.

Message Delivery Options

At anytime prior to sending a message, a subscriber can assign any or all of the following delivery options to a message, Urgent Priority, Return Receipt/Certified, Callback Request, Private or Reply Required.

Message Fast Forward

When listening to a message you may fast-forward 5 seconds. This is useful if you are looking for a specific piece of information like a phone number.

Message Forward With Append

Messages received in your mailbox may be forwarded to other mailboxes or lists on the system. A message may be forwarded to another subscriber or distribution list by entering a destination mailbox. The subscriber may record an introductory comment if desired. The message header is modified to reflect the forwarding party and time. Forwarding multiple copies allows the subscriber to record introductions for each destination mailbox. Forwarded messages may be re-forwarded, with additional introductions, using the same procedure.

Message Length Adjustment

The user can set the maximum message length for each mailbox. The maximum message length is 166 minutes, but the factory default is 10 minutes.

Message Pause

At any time while listening to your voice mail messages, you can pause the playback.

Message Play Order

Each mailbox may be set up to play messages in order of oldest first (First In First OutFIFO) or newest first (Last In First Out-LIFO).

4-15

Page 74

CHAPTER 4. Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь

отображаться.

Message Replay

Messages may be replayed as many times as you like.

Message Reply

When listening to your voice mail messages you may press one key to automatically leave a message for the person who left you a message, this call return feature may always be used for internal calls, and also outside calls if Caller ID is received, and the feature is allowed by the system administrator. A subscriber may reply to a message sent by a public caller. If the public caller requested a return call, Voice Mail will play the message envelope

and announce, ‘Callback Requested’. This means the public caller entered his telephone

number into the mailbox with touch-tone at the time he left the message.

Message Retention Time by Subscriber

The length of time messages are stored prior to automatic purging may be set for each mailbox. Retention Time can be set from 1 to 9,999 days. Retention Time applies to both new and saved messages. Each time a message is saved, the Retention Time is reset. Only messages that have not been accessed are automatically deleted.

Message Recall

A sent message can be canceled before the recipient checks it. The messages that are sent but are not read can be returned to the sender’s mailbox. If a message is sent to several users, the message must be returned from each of them individually. For a message sent to a distribution list, it can be returned in one process if no one in the list has opened it. The message can be edited, updated, recorded, and deleted at the other destinations. This function is useful when a user sends an incorrect message to several users, or when changes need making in a sent message.

Message Rewind

When listening to a message you may rewind 5 seconds. This is useful if you are looking for a specific piece of information like a phone number.

Message Save

You may save any message. Once saved, it will remain as a ‘saved’ message until it is

manually deleted.

Message Send

From within your mailbox you may send a message to any other mailbox owner on the system. This makes it easy for any employee who is out of the office to send a message to another internal user.

4-16

Page 75

OfficeServ 7070 System Description/Ed.02OfficeServ 7070 System Description/Ed.02

Message Scan

Message Scan allows a user who is retrieving their messages to ‘scan’ through them. The first few seconds of each message will be played. This makes it easy to find a specific message.

Message Skip

When listening to new messages, if you a searching for a specific one you can skip over new messages. This saves the message as a new message. It is like picking one thing out of your in-basket without disturbing all the others.

Message Undelete

At some time, everyone discards a message, and immediately wishes they had kept it. The undelete feature of the OfficeServ 7070 Voice Mail will allow you to retrieve messages that have been deleted.

Message Waiting Indication

An indication on your phone tells you when you have new messages. Pressing the configured button will connect with your voice mail. Additionally, if you have a display keyset, the display will show you the current new message status.

Multiple Subscriber Mailboxes Login

Multiple subscribers may simultaneously logon to the same mailbox and access messages. All mailbox functions are available to each subscriber. Message playback is distributed. The first subscriber logged on will hear the first message. The second subscriber will first hear the second message, and can access the first message after subscriber 1 is finished. The mailbox continues to be available to receive new messages, regardless of the number of subscribers logged on.

Name Addressing

This feature allows a subscriber to address messages to other subscribers by name instead of by mailbox number, eliminating the need to look up numbers or carry personal directories while traveling.

New/Old Selection

When you access your mailbox you may choose to listen to either new or old messages. This makes it easier to find specific information contained in an old message without having to listen to all the new messages first.

Message Warning Display Schedule

The weekly warning schedule sets the VM to notify a specified phone number of the date and time of a new message. This function can be set by the administrator or a user.

4-17

Page 76

CHAPTER 4. Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь

отображаться.

Pager Display Schedule

The weekly warning schedule sets the VM to notify a specified pager of the date and time of a new message. This function can be set by the administrator or a user.

Individual Option

Each user can have an individual option to run for each caller. For example, this option allows a caller to ‘hold’ while the user is making a call or until he can receive the call. This option can only be set by the system administrator.

Personal Mailbox Administration

You may change settings for your mailbox any time you like. Personalize the greeting that callers will hear your name, password and notification options.

Private (Confidential) Messages

A message can be marked Private. A private message can not be forwarded to another subscriber. If the recipient of the private message attempts to forward the message he is informed that the message is private and may not be forwarded.

Reply Required

A message marked for delivery as Reply Required cannot be saved or deleted until the recipient performs a voice reply to the message.

External Caller Call

When a user logs in, the VM notifies him of whether or not a caller is waiting, then transmits the location specified by the user. If the caller is registered in the list, the VM notifies the

user of the caller’s name. If the user wants to talk with the caller, he presses the ‘1’ button and hangs up the phone. If not, the VM immediately sends the user’s mailbox greeting to

the caller.

Return Receipt (Certified Messages)

A subscriber may request to be notified when the recipient listens to a message. After the message has been delivered and played back by the recipient, a confirmation receipt is

placed in the new message queue of the sender’s mailbox, it contains the date and time that

the message was played.

Self Memo/Reminder

Easily and quickly leave a reminder in your own mailbox. This virtual notepad is available wherever there is a phone, and can be set for immediate or future delivery. This makes them useful for keeping track of your entire workload to schedule or serve as reminders for meetings.

4-18

Page 77

OfficeServ 7070 System Description/Ed.02OfficeServ 7070 System Description/Ed.02

Self Memo/Reminder Categories

If allowed by the system administrator a subscriber may designate the reminders they create as either a Commitment, Follow Up or Task. The individual meaning of these labels may vary from person to person. Their intent is to provide a way of separating reminders into different categories. These categories can be reviewed in the subscriber Workload Manager

Subscriber Workload Manager

This allows a subscriber to group reminders by a Commitment, Follow Up or Task in order to better organize the workload. Their entire workload can be reviewed or a specific group.

Until… Scheduling

The Until… Scheduling method is an easy way to schedule the termination of a Voice Mail

service relative to the time the service is set active. Most of the services in the Voice Mail

give subscribers greater control over their communications by providing Until…

Scheduling. The subscriber just sets a time for the service to terminate, concurrent with activating it, and does not have to worry about remembering to deactivate the service in the

future. The Until… Scheduling options are, a number of hours, 1 to 9, the end of the current business day, based on the subscriber’s current availability schedule, for the beginning of

the next business day, also based on the sub-scriber’s current availability schedule, a day of the coming week, Monday through Sunday, a specific date, hour and minute, or until further notice.

Urgent Message

A message left by or to a user can be set as urgent. The urgent message is played first and the notification is configured so that only this urgent message is notified to the user.

4-19

Page 78

CHAPTER 4. Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь

отображаться.

4.3.5 Administration Features

Activity Display

While the Voice Mail System (VMS) is running, a status screen in the web management will show useful statistics about the system. Number of calls, average calls per week, number of times all ports were busy, total messages and space available.

Administrators Mailbox

A subscriber designated as a Mailbox Administrator is given the added functionality when they log in to be able to record and send a broadcast message.

Auto Delete Subscribers

Unused subscribers are automatically deleted after a programmable period of disuse. This prevents unauthorized users from ‘High-Jacking’ unused mailboxes.

Automatic Setup

When the Voice Mail is first installed, a range of mailboxes matching the system’s database is created. This reduces set up time.

Back Up And Restore

The customer database can be saved and restored at a later date. This is useful in a number of maintenance scenarios. Additional hardware is necessary to accomplish this.

Default Operation

The Voice Mail is designed to be in operation as soon as it is installed.

Password Security

All administration is under password control to prevent unauthorized access.

Programming-On Site or Remote

By logging in from a touch tone telephone, the designated system administrator can perform routine activities by using the System Administration Special Menu. This makes routine administration easy and convenient.

Subscriber Database

A database of subscribers can be viewed at the web management.

System Reports

Many useful system reports are available from the web management. These may aid in traffic studies, or detecting misuse.

4-20

Page 79

OfficeServ 7070 System Description/Ed.02OfficeServ 7070 System Description/Ed.02

Voice Prompted Programming

From any touch-tone phone in the world an administrator can record custom prompts, add, delete, or modify mailboxes, and change scheduled modes.

Announcement Studio

Using this function, the user can record the greeting announcement used by the system again, or edit it.

4.3.6 Voice Form Questionnaire Features

This feature allows the Voice Mail to be used to conduct surveys or collect a response to a pre-programmed questionnaire. Answers are collated and stored in a specific mailbox, or the answers may be split into many different mailboxes.

Voice Form

The voice form is a function that collects and distributes information. This allows an organization to collect specific information efficiently. The organization creates a series of queries designed to induce a certain form of answer from the caller, called a ‘script’. A query which has an answer becomes a voice query. And a complete set of queries composes a voice form. The answers generated during the talking are collected into one or more messages and they are sent to the specified recording mailbox. The specified receiver of these messages checks, stores, and receives them with the ability to use the complete voice mail functions. Because the voice form questionnaire function is a required part of the VM, a list of the callers related to a voice form questionnaire is sent to a part or all of the system resources.

Playback Header Prompt

Each response recorded by a caller in a Voice Form session can be prefaced by a playback header prompt which links the response to the question. This feature helps in transcription of caller responses by providing reference markers within the caller’s total response. With playback headers, when a caller skips a question, the transcriber does not lose his place within the composite Voice Form message.

Multiple Response

Caller responses during a Voice Form session can be routed to multiple mailboxes. Any part of a caller’s response may be distributed among several mailboxes. For example, a Voice Form session might be designed to process customer orders. Portions of the caller’s responses could be sent to an accounting mailbox for credit approval while the rest of the responses are routed to a shipping department mailbox to expedite the order.

4-21

Page 80

CHAPTER 4. Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь

отображаться.

Team Transcription

The Voice Mail allows simultaneous multiple user access to Voice Form messages in a Transcription Mailbox. When multiple access occurs, the Voice Mail assigns the user the next new message so that there is no duplication of transcription.

Limitless Number of Questions

The maximum number of question or voice queries that can be made in a voice form session is not limited by the structural limitation of the system. A voice query can be connected to make an expanded voice form record.

4.3.7 E-mail Gate Way Function

Sending Voice mails by using E-mails

This function enables to convert a newly incoming voice mail into a WAV file format that can be replayed in a PC and attach the voice mail to the user’s E-mail.

Notifying the arrival of voice mails by using E-mails

This function enables to notify the arrival of a voice mail by using an E-mail.

4.3.8 Simple Auto Relay Function

Playing an Auto Relay Greeting

When a call is entered, the specified auto relay greeting is played. At this time, if the caller presses an extension number, the call is transferred to the specified station.

Recording an Auto Relay Greeting

There are 16 basic greetings. Besides these basic greetings, the user can record up to 48 greetings they want to use.

4-22

Page 81

OfficeServ 7070 System Description/Ed.02OfficeServ 7070 System Description/Ed.02

4.4 Web Management

The OfficeServ 7070 provides the user interface allowing the user to manage the several functional blocks of the system through their web browser.

4.4.1 Web Management Function

Exporting/Importing the Database

 The user can [Export] the telephone and VM/AA databases backed up in the system to

a client PC through the web.

 The user can [Import] the telephone and VM/AA databases from a client PC to the

system through the web.

Package Upload

The user can upgrade the system package through the web.

User Information Management

The user can manage the Web Management user account and password. At first, only the

‘admin’ account exists. Only an admin can add or delete a user account and enter his

password.

Telephone Settings

The user can view and change the settings related to a telephone.

VM/AA Settings

The user can view and change the settings related to the VM/AA.

4-23

Page 82

CHAPTER 4. Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь

This page is intentionally left blank.

отображаться.

4-24

Page 83

ANNEX A. Open Software

Announcement

Some software components of this product incorporate source code covered under the GNU General Public License (GPL), the GNU Lesser General Public License (LGPL), PHP, BSD and OpenSSL license.

GPL SOFTWARE

- u-boot

- csmencaps

- mtd

- linux

- busybox

- vsftpd

- iptables

LGPL SOFTWARE

- glibc

BSD LICENSE SOFTWARE

- OpenSSH

- net-snmp

- libcap

This product includes PHP, freely available from <http://www.php.net/>. This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/). Source codes for these softwares can be obtained contacting the following e-mail address: Opensource.infra@samsung.com

GNU GENERAL PUBLIC LICENSE

Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.

Preamble

The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Library General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify i t. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the orig inal, so that any problems introduced by others will not reflect on the original authors' reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow.

OfficeServ 7070 System Description

A-1

Page 84

ANNEX A. Ошибка! Используйте вкладку "Главная" для применения 제목 9,부록 제목 1 к тексту, который должен

здесь отображаться.

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

0) This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed

under the terms of this General Public License. The “Program”, below, refers to any such program or work, and a “work based on the Program” means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion

of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term “modification”.) Each licensee is addressed as “you”. Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does.

1) You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided that you

conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.

2) You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:

(a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any chan ge. (b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part

thereof, to be licensed as a whole at no charge to all third parties under the terms of this License.

(c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such

interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but doe s not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and sepa rate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.

3) You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following:

(a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections

1 and 2 above on a medium customarily used for software interchange; or,

(b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than yo ur cost of

physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,

(c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternativ e is allowed

only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated inter face definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exce ption, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code , even though third parties are not compelled to copy the source along with the object code.

4) You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as s uch parties remain in full compliance.

5) You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it.

6) Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to t his License.

7) If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues),

conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License , they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program. If any portion of t his section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or o ther property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free s oftware distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.

This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.

A-2

Page 85

OfficeServ 7070 System Description/Ed.02OfficeServ 7070 System Description/Ed.02

8) If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or a mong countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.

9) The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and “any later version”, you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation.

10) If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, wr ite to the author to

ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivat ives of our free software and of promoting the sharing and reuse of software generally.

NO WARRANTY

11) BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGR AM, TO THE

EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

12) IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER,

OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

END OF TERMS AND CONDITIONS

How to Apply These Terms to Your New Programs

If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the

“copyright” line and a pointer to where the full notice is found. <one line to give the program’s name and a brief idea of what it does.>

Copyright (C) <year> <name of author> This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. Also add information on how to contact you by electronic and paper mail. If the program is interactive, make it output a short notice like this when it starts in an interactive mode: Gnomovision version 69, Copyright (C) year name of author

Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type ‘show w’. This is free software, and you are welcome to redistribute it under certain conditions; type ‘show c’ for details. The hypothetical commands ‘show w’ and ‘show c’ should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than ‘show w’ and ‘show c’; they could even be mouse-clicks or menu items--whatever suits your

program. You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright disclaimer” for the program, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the program ‘Gnomovision’ (which makes passes at compilers) written by James Hacker. <signature of Ty Coon>, 1 April 1989 Ty Coon, President of Vice This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Lesser General Public License instead of this License.

GNU LESSER GENERAL PUBLIC LICENSE

Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.]

A-3

Page 86

ANNEX A. Ошибка! Используйте вкладку "Главная" для применения 제목 9,부록 제목 1 к тексту, который должен

здесь отображаться.

Preamble

The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This license, the Lesser General Public License, applies to some specially designated software packages--typically libraries--of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you first think carefully abou t whether this license or the ordinary General Public License is the better strategy to use in any particular case, based on the explanations below. When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed to ma ke sure that you have the freedom to distribute copies of free software (and charge for this service if you wish); that you receive source code or can get it if you want it; that you can change the software and use pieces of it in new free programs; and that you are informed that you can d o these things. To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it. For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure that they, too, receive or can get the source code. If you link other code with the library, you must provide complete object files to the recipients, so that they can relink them with the library after making changes to the library and recompiling it. And you must show them these terms so they know their rights. We protect your rights with a two -step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal permission to copy, distribute and/or modify the library. To protect each distributor, we want to make it very clea r that there is no warranty for the free library. Also, if the library is modified by someone else and passed on, the recipients should know that what they have is not the original version, so that the original author's reputation will not be affected by problems that might be introduced by others. Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder. Therefore, we insist that any p atent license obtained for a version of the library must be consistent with the full freedom of use specified in this license. Most GNU software, in cluding some libraries, is covered by the ordinary GNU General Public License. This license, the GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary General Public License. We use this license for certain librar ies in order to permit linking those libraries into non-free programs. When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking a combined work, a derivative of the original library. The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with the library. We call this license the “Lesser” General Public License because it does Less to protect the user's freedom than the ordinary General Public License. It also provides other free software developers Less of an advantage over competing no n-free programs. These disadvantages are the reason we use the ordinary General Public License for many libraries. However, the Lesser license provides advantages in certain special circumstances. For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de -facto standard. To achieve this, non-free programs must be allowed to use the library. A more frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License. In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of free software. For example, permission to use the GNU C Library in nonfree programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system. Although the Lesser General Public License is Less protective of the users’ freedom, it does ensure that the user of a progra m that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library. The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference bet ween a “work based on the library” and a “work that uses the library”. The former contains code derived from the library, whereas the latter must be combined with the library in order to run.

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

0) This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other

authorized party saying it may be distributed under the terms of this Lesser General Public License (also called “this Licens e”). Each licensee is addressed as “you”. A “library” means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to form executables. The “Library”, below, refers to a ny such software library or work which has been distributed under these terms. A “work based on the Library” means either the Library or any

derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbati m or with modifications and/or translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term “modification”.) “Source code” for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the s cripts used to control compilation and installation of the library. Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what the Library does and what the program that uses the Library does.

1) You may copy and distribute verbatim copies of the Library’s complete source code as you receive it, in any medium, provided that you

conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of this License along with the Library. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.

A-4

Page 87

OfficeServ 7070 System Description/Ed.02OfficeServ 7070 System Description/Ed.02

2) You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute

such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: (a) The modified work must itself be a software library. (b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change. (c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of t his License.

(d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program t hat uses the

facility, other than as an argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such function or table, the facility still operates, and performs whatever part of its p urpose remains meaningful. (For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square roots.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be rea sonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or con test your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Library. In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.

3) You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do

this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices. Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative wo rks made from that copy. This option is useful when you wish to copy part of the code of the Library into a program that is not a library.

4) You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the

terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange. If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object code.

5) A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being co mpiled or linked

with it, is called a “work that uses the Library”. Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License. However, linking a “work that uses the Library” with the Library creates an executable that is a d erivative of the Library (because it contains portions of the Library), rather than a “work that uses the library”. The executable is therefore co vered by this License. Section 6 states terms for distribution of such executables. When a “work that uses the Library” uses material from a header file

that is part of the Library, the object code for the work may be a derivative work of the Library even though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law. If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under Section 6.) Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the Library itself.

6) As an exception to the Sections above, you may also combine or link a “work that uses the Library” with the Library to produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that the terms permit modif ication of the work for the customer’s own use and reverse engineering for debugging such modifications. You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You must supply a copy of this License. If the work during execution displays copyright notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to the copy of this License. Also, you must do one of these things: (a) Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes

were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine-readable “work that uses the Library”, as object code and/or source code, so that the user can modify the Library and then relink to produce a modified executable containing the modified Library. (It is understood that t he user who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to use the modified definitions.)

(b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run time a copy of

the library already present on the user’s computer system, rather than copying library functions into the executable, and (2) will operate properly with a modified version of the library, if the user installs one, as long as the modified version is interface-compatible with the version that the work was made with.

(c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified i n Subsection 6a,

above, for a charge no more than the cost of performing this distribution.

(d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above

specified materials from the same place.

(e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy.

For an executable, the required form of the “work that uses the Library” must include any data and utility programs needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable.

It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany

the operating system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute.

A-5

Page 88

ANNEX A. Ошибка! Используйте вкладку "Главная" для применения 제목 9,부록 제목 1 к тексту, который должен

здесь отображаться.

7) You may place library facilities that are a work based on the Library side-by-side in a single library together with other library facilities not covered by this License, and distribute such a combined library, provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that you do these two things: (a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities.

This must be distributed under the terms of the Sections above.

(b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where to

find the accompanying uncombined form of the same work.

8) You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licens es terminated so long as such parties remain in full compliance.

9) You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or

distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library or works based on it.

10) Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from the original

licensor to copy, distribute, link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties with this License.

11) If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues),

conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License , they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations und er this License and any other pertinent obligations, then as a consequence you may not distribute the Library at all. For exampl e, if a patent license would not permit royalty-free redistribution of the Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Library. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free s oftware distribution system which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/dono r to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.

12) If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original

copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.

13) The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such

new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Library specifies a version number of this License which applies to it and “any later version”, you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Library does not specify a license version number, you may choose any version ever published by the Free Software Foundation.

14) If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to

the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.

NO WARRANTY

15) BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE

EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT

HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER

EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

16) IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER,

OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

END OF TERMS AND CONDITIONS

A-6

Page 89

OfficeServ 7070 System Description/Ed.02OfficeServ 7070 System Description/Ed.02

How to Apply These Terms to Your New Libraries

If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. You can do so by per mitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License). To apply these terms, attach the following notices to the library. It is safest to at tach them to the start of each

source file to most effectively convey the exclusion of warranty; and each file should have at least the “copyright” line and a pointer to where the full notice is found. one line to give the library’s name and an idea of what it does.

Copyright (C) year name of author This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. Also add information on how to contact you by electronic and paper mail. You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright disclaimer” for the library, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the library ‘Frob’ (a library for tweaking knobs) written by James Random Hacker. Signature of Ty Coon, 1 April 1990 Ty Coon, President of Vice That’s all there is to it!

The PHP License, version 3.0

Copyright (c) 1999 - 2002 The PHP Group. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted provided that the following con ditions are met:

1) Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

2) Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following discl aimer in the documentation and/or other materials provided with the distribution.

3) The name “PHP” must not be used to endorse or promote products derived from this software without prior written permission.

For written permission, please contact group@php.net.

4) Products derived from this software may not be called “PHP”, nor may “PHP” appear

in their name, without prior written permission from group@php.net. You may indicate that your software works in conjunction with PHP by saying "Foo for PHP" instead of calling it “PHP Foo” or “phpfoo”

5) The PHP Group may publish revised and/or new versions of the license from time to time. Each version will be given a distinguishing version number. Once covered code has been published under a particular version of the license, you may always continue to use it under the terms of that version. You may also choose to use such covered code under the terms of any subsequent version of the license published by the PHP Group. No one other than the PHP Group has the right to modify the terms applicable to covered code crea ted under this License.

6) Redistributions of any form whatsoever must retain the following acknowledgment: “This product includes PHP, freely available from <http://www.php.net/>”.

THIS SOFTWARE IS PROVIDED BY THE PHP DEVELOPMENT TEAM “AS IS” AND ANY EXPRESSED OR IMPLIED

WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE PHP DEVELOPMENT TEAM OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

--------------------------------------------------------------------

This software consists of voluntary contributions made by many individuals on behalf of the PHP Group. The PHP Group can be contacted via Email at group@php.net. For more information on the PHP Group and the PHP project, please see <http://www.php.net>. This product includes the Zend Engine, freely available at <http://www.zend.com>.

BSD License

Copyright (c) 2000-2003 Intel Corporation All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following co nditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer . * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the follow ing disclaimer in the

documentation and/or other materials provided with the distribution.

* Neither name of Intel Corporation nor the names of its contributors may be used to endorse or promote products derived from this software

without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL INTEL OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

A-7

Page 90

ANNEX A. Ошибка! Используйте вкладку "Главная" для применения 제목 9,부록 제목 1 к тексту, который должен

здесь отображаться.

LICENSE ISSUES ============== The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original SSLeay licen se apply to the toolkit. See below for the actual license texts. Actually both licenses are BSD-style Open Source licenses. In case of any license issues related to OpenSSL please contact openssl-core@openssl.org.

OpenSSL License

Copyright (c) 1998-2004 The OpenSSL Project. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1) Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaim er.

2) Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

3) All advertising materials mentioning features or use of this software must display the following acknowledgment:

“This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)”

4) The names “OpenSSL Toolkit" and "OpenSSL Project” must not be used to endorse

or promote products derived from this software without prior written permission. For written permission, please contact openssl-core@openssl.org.

5) Products derived from this software may not be called “OpenSSL” nor may “OpenSSL” appear in their names without prior written permission of the OpenSSL Project.

6) Redistributions of any form whatsoever must retain the following acknowledgment:

“This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)” THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS” AND ANY EXPRESSED OR IMPLIED WARRANTIES,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). This product includes software written by Tim Hudson (tjh@cryptsoft.com).

Original SSLeay License

Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved. This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was written so as to conform with Netscapes SSL. This library is free for commercial and non-commercial use as long as the following conditions are adhered to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentat ion included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.com). Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the fo llowing conditions are met:

1) Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.

2) Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution.

3) All advertising materials mentioning features or use of this software must display the following acknowledgement:

“This product includes cryptographic software written by Eric Young(eay@cryptsoft.com)” The word ‘cryptographic’ can be left out if the rouines from the library being used are not cryptographic related: -).

4) If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an

acknowledgement: “This product includes software written by Tim Hudson (tjh@cryptsoft.com)”

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “ AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT

NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The license and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution license [including the GNU Public Licence.]

A-8

Page 91

ABBREVIATION

4DLM 4 Port DLI Module

4SL2 4 Port SLI Module 2

4TRM 4 Port Trunk Module

AA Auto Attendant

AC Alternating Current

AOM Add On Module

AP Access Point

AWG American Wire Gauge

OfficeServ 7070 System Description

BMP Basic Main Processor Board

B8S Basic 8SLI

CAS Channel Associated Signaling

CBQ Class Based Queuing

CCS Common Channel Signaling

CID Caller ID

CTI Computer Telephony Integration

DC Direct Current

DLI Digital Line Interface

DPIM Door Phone Interface Module

E8S Extended 8 Port SLI Board

EMI Electro-Magnetic Interference

Page 92

Ошибка! Используйте вкладку "Главная" для применения 제목 8,표준 제목 1 к тексту, который должен здесь

отображаться.

IP Internet Protocol

IPC Inter Protocol Communication

ITU International Telecommunication Union

LAN Local Area Network

LED Light Emitting Diode

MGI Media Gateway Interface

MII Media Independent Interface

MMC Man Machine Communication (Code, Command)

MOH Music On Hold

PC Personal Computer

PRI Primary Rate Interface

PRM PRI Module

PRS Polarity Reverse Signal

PSU Power Supply Unit

PSTN Public Switched Telephone Network

QoS Quality of Service

RTP Real-time Transmission Protocol

SIP Session Initiation Protocol

SLI Subscriber Line Interface

SMDR Station Message Detail Recording

TAPI Telephony Application Programming Interface

Page 93

OfficeServ 7070 System Description/Ed.02OfficeServ 7070 System Description/Ed.02

UA User Agent

UART Universal Asynchronous Receiver and Transmitter

USB Universal Serial Bus

UTP Unshielded Twisted Pair

VLAN Virtual Local Area Network

VMS Voice Messaging System

VoIP Voice over Internet Protocol

VPN Virtual Private Network

WAN Wide Area Network

WLAN Wireless Local Area Network

III

Page 94

Ошибка! Используйте вкладку "Главная" для применения 제목 8,표준 제목 1 к тексту, который должен здесь

This page is intentionally left blank.

отображаться.

Page 95

OfficeServ 7070

System Description

Information in this manual is proprietary to SAMSUNG Electronics Co., Ltd.

No information contained here may be copied, translated, transcribed or duplicated by any form without the prior written consent of SAMSUNG.

Information in this manual is subject to change without notice.

Samsung OfficeServ 7070 System Description User guide

Specifications and Main Features

Frequently Asked Questions

User Manual