Samsung NV24HD Quick Start Manual

EN-1



Microsoft, Windows and Windows logo are registered trademarks of Microsoft Corporation incorporated in the United States and/or other countries



HDMI, HDMI logo, and High-Deﬁnition Multimedia Interface are registered trademarks of HDMI Licensing LLC.



Apple, Mac and QuickTime logo are registered trademarks of Apple computer.



All brand and product names appearing in this manual are registered trademarks of their respective companies.



The contents and illustrations of this manual are subject to change without prior notice for upgrading the camera functions.



Refer to the user manual included on the Software CD for more information.



PDF documents of user manual are included in the Software CD-ROM supplied with this camera. Search the PDF ﬁles with Windows explorer. Before opening the PDF ﬁles, you must install the Adobe Reader included in the Software CD-ROM.

Contents

Getting to know your camera

FCC notice



NOTE :

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the distance between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

– Consult the dealer or an experienced radio / TV technician for help.



CAUTION :

Changes or modiﬁcations not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment.



Declaration of Conformity

Trade Name : SAMSUNG TECHWIN Model No. : Samsung NV24HD Responsible Party : SAMSUNG ELECTRONICS AMERICA INC. Address : 105 Challenger Road Ridgeﬁeld Park NJ Telephone No. : 1-800-SAMSUNG(726-7864)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

ENGLISH

Getting to know your camera 1 Identiﬁcation of features / Contents of camera 4

attery life & Number of shot (Recording time) 6

B When Using the Camera for the First Time : Smart button

7 When Using the Camera for the First Time : Setting up the Date / Time and Language 8

MOLED monitor indicator 9

ode dial 10

aking a picture 11

layingback, Deleting and Protecting Images 12

sing the remote control 14

onnecting to the HDTV using the HDMI cable 15

ownloading images 17

peciﬁcations 18

EN-2

Getting to know your camera

DANGER

DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Do not attempt to modify this camera in any way. To do so may result in ﬁre, injury, electric shock or severe damage to you or your camera. Internal inspection, maintenance and repairs should only be carried out by your dealer or Samsung Camera Service centre.

Should any form of liquid or a foreign object enter the camera, do not use it. Switch off the camera, and then disconnect the power source. You must contact your dealer or Samsung Camera Service centre. Do not continue to use the camera as this may cause a ﬁre or electric shock.

Please do not use this product in close proximity to ﬂammable or explosive gases, as this could increase the risk of explosion.

Do not insert or drop metallic or inﬂammable foreign objects into the camera through access points e.g. the memory card slot and battery chamber. This may cause a ﬁre or electric shock.

Do not operate this camera with wet hands. This could pose a risk of electric shock.

WARNING

WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Do not use the ﬂash in close proximity to people or animals. Positioning the ﬂash too close to your subject’s eyes may cause eyesight damage.

For safety reasons keep this product and accessories out of reach of children or animals to prevent accidents e.g.:

- Swallowing battery or small camera accessories. If an accident should occur, please consult a doctor immediately.

- There is the possibility of injury from the camera’s moving parts.

Battery and camera may become hot during prolonged use and it may result in camera malfunction. Should this be the case, allow the camera to sit idle for a few minutes to allow it time to cool.

Do not leave this camera in places subject to extremely high temperatures, such as a sealed vehicle, direct sunlight or other places of extreme variances in temperature. Exposure to extreme temperatures may adversely affect the camera’s internal components and could cause a ﬁre.

When in use, do not cover the camera or Charger. This may cause heat to build up and distort the camera body or cause a ﬁre. Always use the camera and its accessories in a wellventilated area.

EN-3

Getting to know your camera

CAUTION

CAUTION indicates a potentially hazardous situation which, if not avoided, may result in a minor or moderate injury.

Remove the battery when not planning to use the camera for a long period of time. Otherwise the battery may leak corrosive electrolyte and permanently damage the camera’s components.

Leaking, overheating, or damaged battery could result in ﬁre or injury. – Use battery with the correct speciﬁcation for the camera. – Do not short circuit, heat or dispose of battery in ﬁre. – Do not insert the battery with the polarities reversed.

Be sure to format the memory card if you are using a newly purchased memory for the ﬁrst time, if it contains data that the camera cannot recognise, or if it contains images captured with a different camera.

Do not ﬁre the ﬂash while it is in contact with hands or objects. Do not touch the ﬂash after using it continuously. It may cause burns.

Credit cards may be demagnetized if left near a camera case. Avoid leaving magnetic strip cards near the case.

Do not move the camera while it is switched on when you are using the AC Charger. After use, always switch off the camera before unplugging the cable from the wall socket. Then make sure that any connector cords or cables to other devices are disconnected before moving the camera. Failure to do so may damage the cords or cables and cause a ﬁre or electric shock.

Take care not to touch the lens or lens cover to avoid taking an unclear image and possibly causing camera malfunction.

Avoid obstructing the lens or the ﬂash when you capture an image.

Before inserting any cables or AC adapter, check the directions and do not insert by force. It may cause breakage of cable or camera. It is highly likely to result in computer malfunctions when the 30 pin connector is connected to the USB port of a PC. Never connect the 30 pin connector to USB port of a PC.

Do not insert the memory card the wrong way round. Doing so may cause damage to the camera.

Before an important event or going on a trip, you should check the camera condition. Samsung cannot be held responsible for camera malfunctions.

ENGLISH

EN-4

Identiﬁcation of features / Contents of camera

To open the battery chamber cover, slide it in the direction shown above.

Bottom

Cradle (Optional)

Front & Top

Rear

You can recharge your rechargeable battery, transfer a captured image to print, and download images with the cradle (optional).

[When Using the flash]

Shutter button

Power button Speaker

Flash

Mode dial

Remote

control sensor

Lens

Self-timer lamp

AF sensor

Instructions for the Built-in ﬂash

● The ﬂash opens automatically when you press the shutter button down half way.

● Do not open the ﬂash by force. It may cause breakage of camera.

● When you don’t use the ﬂash, close the ﬂash to prevent breakage.

Eyelet for camera strap

Play mode button

BACK button / OIS button

AMOLED monitor

Camera status lamp

Zoom W button (Thumbnail)/ Zoom T button (Digital zoom)

Photo style seclector

dial

Microphone

Smart buttons

Battery cover lever

Tripod socket

USB port/AV connection terminal

Battery holderBattery chamber

cover

Memory card slot

Battery chamber

HDMI connection

terminal

AV connection terminalDC connection

terminal/USB port

Camera connection terminal

EN-5

Identiﬁcation of features / Contents of camera

Optional items

SD/SDHC/MMC

memory card

Remote control Cradle (SCC-NV4HD) HDMI cable Camera case

Included items

Camera

User manual,

Product warranty

Software CD

Rechargeable battery

(SLB-1137D)

Camera strap

AC adapter (SAC-47) /

USB cable (SUC-C4)

AV cable

Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre.

ENGLISH

EN-6

Battery life & Number of shot (Recording time)



Number of images and battery life: Using the SLB-1137D

Battery life /

Number of images

Based on the following shooting

conditions

Still image

Approx. 100 MIN

/ Approx. 200

Using the fully charged battery, Auto mode, 10M image size, Fine image quality, Shot to shot interval : 30Sec. Changing the zoom position between the Wide and the Tele after every shot. Using the flash on every second shot. Using the camera for 5 minutes and then Powering it off for 1 minute.

Recording time

Based on the following shooting

conditions

Movie

Approx. 90 MIN

Using the fully charged battery 640x480 image size 30fps frame rate

※ These figures are measured under Samsung’s standard conditions and

shooting conditions and may vary depending on the user’s methods.

※ These figures are measured under OIS shooting condition.



When using a 256MB MMC memory, the speciﬁed shooting capacity will be as follows. These ﬁgures are approximate as image capacities can be affected by variables such as subject matter and memory card type.

Recorded

image size

SUPER

FINE

FINE NORMAL

60FPS 30FPS 15FPS

Still

image

49 94 136

- - -

55 105 151

- - -

68 129 183

- - -

64 122 174

- - -

93 173 242

- - -

143 255 345

- - -

418 617 732

- - -

Movie

1280

- - - -

about

5’23”

about

10’47”

640

- - - -

about

16’14”

about

25’

320

- - -

about

20’18”

about

25’

about

25’

* The recording times can be affected by the zoom operation.

The zoom button doesn’t operate while recording movies.

EN-7

When Using the Camera for the First Time : Smart button

This button is used for shifting the menu cursor to select or for confirming the selected menu.

Slow Fast

To select a sub menu, in some menus, touch the button and slide your finger to the left / right.

[e.g. : Manual - Selecting the shutter speed]

[Confirming the sub menu :

Pressing the button]

[Selecting the sub menu :

Touching the button]

3648x2056 3072x2304 3648x2432 3648x2736

[Confirming the main menu :

Pressing the button]

[Selecting the main menu :

Touching the button]

SIZE

Pressing the

extension menu

button

※ The AMOLED monitor will be dark when some menus are selected. After

selecting the menu, the AMOLED monitor returns to the brightness set as before.

Extending the menus : Press the extension menu button and more

available menus will be displayed.

3648x2056 3072x2304 3648x2432 3648x2736

ENGLISH

EN-8

When Using the Camera for the First Time : Setting up the Date / Time and Language

When the camera is turned on for the first time, a menu will be displayed in the AMOLED monitor to set date, time and language. This menu will not be displayed again after setting up the date, time and language. Set up the date, time and language before using this camera.

■ Setting up the language

1. Press the [Language] menu button.

2. Select a desired language by pressing the vertical smart button.

■ Setting up the date, time and date type

1. Press the [Date & Time] menu button.

2. Select a desired date type by pressing the vertical smart button.

3. To change the date, select the [2008/01/01] menu and press the vertical smart button.

4. To select Year / Month / Day and Hour : Minute, press the horizontal smart button. To change the numbers, press the vertical smart button.

※ For more information on setting World Time, please refer to the

documentation included with the software CD.

Language

Date & Time



2008/01/01

yy/mm/dd

mm/dd/yy

dd/mm/yy

Off

Exit:BACK









08 / 01

/ 01 01 : 00



London

● You can select any one of 23 languages. These are listed below :

- English, Korean, French, German, Spanish, Italian, S.Chinese, T.Chinese, Japanese, Russian, Portuguese, Dutch, Danish, Swedish, Finnish, Thai, Bahasa (Malay / Indonesian), Arabic, Persian, Polish, Hungarian, Czech and Turkish.

● Even if the camera is restarted, the language setting will be

maintained.

Language

Date & Time

ENGLISH

FRANÇAIS

DEUTSCH



Exit:BACK



EN-9

AMOLED monitor indicator

The AMOLED monitor displays information about the shooting functions and selections. Refer to the user manual included on the Software CD for more information.

No. Description Icons

1 Recording mode 2 Photo Style Selector

3 Battery

4 OIS (Optical Image Stabilization)

5 Focus mode 6 Flash 7 Image size 8

Face detection / Self portrait / Focus Area

No. Description Icons

9 Shooting mode

10 Metering

11 Image adjust 12 Effect 13 Image quality / Frame rate

14 Self-timer

Voice recording /

Voice memo / Without Sound

/ /

16 Setup menu 17 Extension menu 18 ACB 19 Aperture Value

F2.8

Exposure compensation / Shutter Speed

/ 1/30

21 ISO

22 White Balance/Scene mode

23 Date / Time

01:00 PM 2008.01.01

Optical / Digital Zoom bar /

Memory card icon / Internal memory icon

27 Auto focus area

[Image & Full Status]

ENGLISH

EN-10

Mode dial

AUTO

Selects this mode for quick and easy picture taking with minimal user interaction. In this mode, you can select the basic menus. To select an advanced menu, select the other camera mode.

PROGRAM

Selecting the automatic mode will conﬁgure the camera with optimal settings. You can still manually conﬁgure all functions except the aperture value and shutter speed.

MANUAL

The user can manually set both the aperture value and the shutter speed.

DUAL IS

This mode will reduce the effect of camera shake and help you get a well-exposed image in dim conditions.

NIGHT

Use this for shooting still images at night or in other dark conditions.

PORTRAIT

Selecting the portrait mode will conﬁgure the camera with optimal settings for portrait photography.

Use the menu to easily conﬁgure optimal settings for a variety of shooting situations.

MOVIE

For taking a movie.



You can select the desired shooting mode by using the mode dial on the upper body of your camera.

EN-11

82 83

Taking a picture



How to take a picture

1. Turn on the POWER button and then

select the desired shooting mode by using the mode dial on the upper body of your camera.

2. Hold the camera as shown.

3. Conﬁrm the composition.

4. Take a picture



How to record a movie

Select the Movie Clip mode by using the mode dial on the upper body of your camera.

1. Conﬁrm the composition.

2. Start the recording.

Press the Shutter button and the recording starts and press the Shutter button again to stop the recording

Pressing halfway down Focus and Flash status are checked.

Pressing fully Image is taken.

ENGLISH

EN-12

Playingback, Deleting and Protecting Images



Playingback the images



Deleting images

This is used to delete the displayed image.

[YES] : Deletes displayed or checked ( ) image. [NO] : Cancels deleting displayed image or

checked (

) image.

- The protected images can’t be deleted.

- If you wish to delete multi-image, check to delete the image by using the (

) button and the smart button (horizontal) and then press the [Yes] menu.

- The number of images will be displayed at the bottom right of the AMOLED monitor.

Delete

Delete?

Yes

1. Select the PLAY mode by pressing the play mode button ( ).

2. The last image stored on the memory is displayed on the AMOLED monitor.

3. Touch the button and slide your finger to

the left or right to select an image.

※ If you press the ① or ② button, the image

will be played back continuously.

1 2

EN-13

Playingback, Deleting and Protecting Images

This is used to protect (Lock) specific shots from being accidentally erased. It also unprotects (Unlocks) images that have been previously protected.

[ONE] : Protect / release displayed image. [ALL] : Protect / release all saved images.

- If you protect an image, the protect icon will

be displayed on the AMOLED monitor. (An unprotected image has no indicator)

- An image in LOCK mode will be protected from

the delete function, but will NOT be protected from the format function.

ONE ALL

Protect?

Lock

Unlock



Protecting images

ENGLISH

EN-14

101

Using the remote control



Remote control range

When you take a picture by using the remote control, refer to the illustrations shown alongside about the remote control range.

[Shutter button on the

remote control]



Using the remote control in play mode

You can play the movie clip and images by remote control.

Play mode button : Play the images or movie clip.

If pressed when Anynet+(CEC) is used, the playback menu appears.

Thumbnail button : Display images into 9 thumbnail images.

Enlargement button : Enlarge the images.

Button for moving up : Move to the previous thumbnail page.

Button for moving left/right : You can move to the left/right

image in the thumbnail screen.

Play/Pause button : Play or pause voice memo,

voice recording, movie clip or images.

Button for moving down : Move to the next thumbnail page.

Enter button : Used to confirm when Anynet+(CEC).



Replacing battery for the remote control

Make sure the + (positive) polarity is toward the top and the - (negative) polarity is toward the bottom while installing battery for the remote control. Replace battery for the remote control in the local service centre. Use the CR 2025 3V battery.

EN-15

Connecting to the HDTV using the HDMI cable



How to connect the camera with the HDTV

Connect the cradle with the HDTV by using the HDMI cable to the HDMI connection ports.



Setting the HDMI resolution

When the camera is connected with the HDTV, you can select image size that is compatible with the HDTV. The image size are [1080i], [720p], [480p] and [576p]. Only when [480p] is set to [NTSC] and [576p] is set to [PAL], those resolutions will be displayed in the menu.



OSD set

Display Bright

HDMI Size

Start Image

Exit:BACK

1080i

720p

480p

HDMI cable

● HDMI (High Definition Multimedia Interface) is a function that allows transferring the recorded images without compression by using the HDMI cable. You can see the images in a high resolution in the HDTV.

● When Anynet+(CEC) is used and HDMI resolution is set to [480p](NTSC) or [576p](PAL), it is only available to play back the image, movie clip, voice.

● If the selected HDMI resolution is not supported by HDTV, the clear image can not be shown in the screen.

● If you try to select the HDMI resolution that is not supported by HDTV, the resolution is adjusted to the maximum resolution of the HDTV. For example, if you select “1080i” when the HDTV supports the “720p” by the maximum resolution, it is adjusted to “720p.”

● You can playback the normal resolution of the movie clip as well.

● You can not connect HDMI to HDTV which is not supported. Please check up the specification of HDTV before connecting it.

● For more information of the HDTV connection, see the user manual of the HDTV.

ENGLISH

EN-16

Connecting to the HDTV using the HDMI cable



Using the Anynet+(CEC)

Anynet+(CEC) is an AV network system which controls over all your connected SAMSUNG AV devices when using the TV remote control that supports Anynet+. When connected to the SAMSUNG HDTV, you can operate the playback functions by using the camera or the TV remote control.

1. Connect the cradle with the HDTV by using the HDMI cable to the HDMI

connection ports while the camera is connected to the cradle.

2. TV turns on as soon as the power button is pressed on the camera.

3. If there is no picture after turning on the TV, press the source button on the

TV remote control to change to the HDMI mode.

- Depending on the TV, it might not change to the HDMI mode although you press the source button.

4. Press the Anynet+ button on the TV remote control.

Playback menu appears in the TV screen when you press the menu button on

the TV remote control. (Or the playback button on the camera’s remote control).

※

The playback menu appearing on TV screen operates the same function of the camera.

6. Select the desired playback function by using the remote control of the TV

or the camera.

※

To select the sub menus, move to the desired playback menu and then press the Enter button.

● Only available when using the TV that supports Anynet+(CEC). (Not available by using TV that supports Anynet)

● As soon as you connect the camera with the cradle(with the camera’s power turned on), the playback menu appears in the TV screen. (Available when the cradle and the TV are already connected.)

● For more detailed information of the HDTV connection, see the user manual of HDTV.

Play type

Slide show

Delete

Rotate

Thumbnail

Exit

EN-17

Downloading images



PC connection mode

1. Install the supplied Software.

2. Download the images.

Connect the camera and Computer with supplied USB cable and download the image on your computer to save them.

When using the cradle

When the cradle is not used



System Requirements

For Windows For Macintosh

PC with processor better than Pentium III 450MHz (Pentium 800MHz recommended)

Power Mac G4 or later

Windows 98SE/2000/ME/XP/Vista Mac OS 10.2 or later 250MB of available hard-disk space

(1GB recommended)

250MB of available hard-disk space

Minimum 128MB RAM (512MB recommended)

Minimum 256MB RAM

(256MB recommended) USB port USB port CD-ROM drive CD-ROM drive 1024x768 pixels, 16-bit color display

compatible monitor (24-bit color display recommended), Microsoft DirectX 9.0 or later



QuickTime Player 7.4 : H.264(MPEG4.AVC) playback Requirements

For Windows For Macintosh

Intel Pentium 4, 3.2GHz or later / AMD Athlon 64FX, 2.6GHz or later

1.8GHz Power Mac G5 or

1.83 GHz Intel Core Duo or later

Macintosh Windows XP service pack2/Vista Minimum 512MB RAM

(1GB recommended)

Minimum 256MB RAM

(1GB recommended) nVIDIA Geforce 7600GT or later /

ATI X1600 series or later

64MB video card

ENGLISH

EN-18

Speciﬁcations

Image Sensor - Type : 1/2.3″ CCD

- Effective Pixel : Approx. 10.20 Mega-pixel

- Total Pixel : Approx. 10.30 Mega-pixel

Lens - Focal Length : Schneider Lens f = 4.3 ~ 15.5mm

(35mm film equivalent : 24~86.5mm)

- F No. : F2.8(W) ~ F5.9(T)

- Digital Zoom : · Still Image mode : 1.0X ~ 5.0X

· Play mode : 1.0X ~ 11.4X (depends on image size)

AMOLED Monitor - 2.5” AMOLED (230,000 pixel) Focusing - Type : TTL auto focus (MULTI AF, CENTER AF,

SELF PORTRAIT, FACE DETECTION )

- Range

Shutter - Speed : AUTO : 1 ~ 1/2,000 sec.

MANUAL : 16 ~ 1/2,000 sec. NIGHT : 8 ~ 1/2,000 sec. FIREWORKS : 4 sec.

Exposure - Control : AE, Manual Exposure

Metering : CENTER, SPOT, MULTI, FACE DETECTION

- Compensation : ±2EV (1/3EV steps)

- ISO Equivalent : Auto, 80, 100, 200, 400, 800, 1600,

3200 (image size of 3200 is fixed as 3M)

Focus Type Normal Macro Auto Macro

Wide (W) 40cm ~ Infinity 5cm ~ 40cm 5cm ~ Infinity

Tele (T) 80cm ~ Infinity 50cm ~ 80cm 50cm ~ Infinity

Flash - Modes : RED EYE FIX, SLOW SYNC, FILL IN,

RED EYE, AUTO, OFF

- Range :

Wide : 0.4m~5.6m, Tele : 0.5m~2.8m (ISO Auto)

- Recharging Time : Approx. 5 sec.

Shake Reduction - Dual IS (OIS + DIS)

OIS (Optical Image Stabilization), DIS (Digital Image Stabilization)

Effect - Effect :

· Photo Style Selector : NORMAL, CLASSIC, CALM, COOL, RETRO, FOREST, VIVID, SOFT

· Color Effect : NEGATIVE, GREEN, RED, BLUE, SEPIA, B & W

· Image Adjust : CONTRAST, SATURATION,

SHARPNESS

- Edit :

· Image Edit : ROTATE, RESIZE, EFFECT

· Color Effect : NEGATIVE, GREEN, RED, BLUE, SEPIA, B & W

· Special Color : ADD NOISE, ELEGANT, SHADED,

COLOR FILTER

· Image Adjust : SATURATION, CONTRAST,

BRIGHTNESS, ACB, RED EYE FIX

White Balance - Auto, Daylight, Cloudy, Fluorescent_H, Fluorescent_L,

Tungsten, Custom

Voice Recording - Stereo

- Voice Recording (Max 10 hour)

- Voice Memo in Still Image (Max. 10 sec.)

EN-19

100

Speciﬁcations

Shooting - Still Image :

· Modes : AUTO, PROGRAM, MANUAL, DUAL IS, NIGHT, PORTRAIT, SCENE

· Scene : SMILE SHOT, BLINK DETECTION, CHILDREN,

LANDSCAPE, CLOSE-UP, TEXT, SUNSET, DAWN, BACKLIGHT, FIREWORKS, BEACH & SNOW, SELF-SHOT, FOOD, CAFÉ

· Continuous : AEB, M. CAPTURE, HIGH SPEED,

CONTINUOUS, SINGLE

· Self-timer : REMOTE, DOUBLE, 2 SEC, 10 SEC

- Movie Clip :

With Audio or without Audio (Max Recording time : 25min)

· Size : 1280x720, 640x480, 320x240

· Frame rate : 60 FPS, 30 FPS, 15 FPS

· 3.6X Optical Zoom and Mute in Zooming (Sound goes mute

when operating the zoom function)

· Movie Editing (Embedded) :

Pause during recording, Still Image Capture, Time Trimming

Storage - Media

· Internal Memory : About 16MB

· External Memory (Optional) : SD (up to 4GB guaranteed) SDHC Card (up to 8GB guaranteed) MMC Plus (Up to 2GB, 4bit 20MHz)

Internal Memory capacity is subject to change without prior notice.

- File Format :

· Still Image : JPEG (DCF), EXIF 2.21, DPOF 1.1, PictBridge 1.0

· Movie : MP4 (H.264(MPEG4.AVC))

· Audio : WAV

Image Size

and Capacity (256 MB Size)

3648x2736 3648x2432 3072X2304 3648x2056 2592x1944 2048x1536 1024x768

SUPER FINE

49 55 68 64 93 143 418

FINE

94 105 129 122 173 255 617

NORMAL

136 151 183 174 242 345 732

※

These figures are measured under Samsung’s standard conditions and may vary depending on shooting conditions and camera settings.

Image Play - Type : Single image, Thumbnails, Slide show

* SLIDE SHOW: with selected Effect & Music by folders

Interface - Digital output connector : USB 2.0 (30pin)

- Audio output : Mono(Internal Speaker), Stereo(Microphone)

- Video output : Stereo Output AV: NTSC, PAL (user selectable), HDMI 1.2 : NTSC, PAL (user selectable) * Remarks:

HDMI function is available

when connected to the cradle(optional).

- DC power input connector : New 30 pin Connector, 4.2V

Power Source - Rechargeable battery : SLB-1137D (1,100mAh)

- Adaptor : SAC-47, SUC-C4

- Cradle : SCC-NV4HD (Optional)

* Included battery may depending on sales region.

ENGLISH

+ 43 hidden pages