This Document can not be used without Samsung's authorization.
4. Disassembly and Assembly
1) Q1 Disassembly and Assembly
Part Picture Explanation
1. Separate the AC adaptor and the battery
certainly before disjoint system.
2. Push out the battery on like figure 2 after
have pushed latches with figure 1 to both side.
1
2 2
1
3. Remove the Bottom Screws (6EA) and
Detach Housing-Back.
Main
System
4. Remove Tapes.
Caution
Tape and Cable must fix like the picture.
5. Remove DMB module Screw (2EA) and
Antenna Screw (1EA)
6. Remove DMB module and Antenna Sub Board.
5
Caution
No DMB model : go next stage
SENS Q-1 < 4 - 1 >
This Document can not be used without Samsung's authorization.
4. Disassembly and Assembly
Part Picture Explanation
7. Remove Antenna Screw 1EA and Remove
7
Wireless LAN module and Antenna
8. Open Latch and Remove HDD.
Main
System
9. Disconnect Fan Connector, Speaker
Connector(2), Left Sub Board FPC, LCD FPC,
Mic Connetor.
10. Remove Fan Screw (2EA).
11. Remove Main Board Screw (7EA).
12. Remove Fan.
13. Disconnect Right Sub Board FFC.
14. Lift up Main Board and Disconnect Inverter
Cable.
15. Remove MainBoard.
SENS Q-1 < 4 - 2 >
Loading...