1) 1GB = 1,000,000,000 bytes by IDEMA. A certain portion of capacity may be used for system file and maintenance uses, thus the actual available
capacity may differ from the labeled capacity.
2) M.2 is the specification of a form factor for ultra-thin PCs. The M.2 standard allows widths of 12, 16, 22 and 30mm and lengths of 16, 26, 30, 38, 42, 69,
80 and 110mm. Commercially popular M.2 are those with a width of 22mm and lengths of 30, 42, 60, 80 and 110mm. Samsung provides the most
popular form factor, which is 22mm x 80mm (i.e., 2280), for the convenience of customers.
3) Sequential and random performance measurements are based on IOmeter1.1.0. Performance may vary based on SSD’s firmware version, system
hardware & configuration. Test system configuration: Intel Core i7-7700K @ 4.2GHz, SAMSUNG DDR4 32GB, OS-Windows 10 Build 10240, ChipsetASUS PRIME Z270-A.
4) Sequential and random write performance was measured with Intelligent TurboWrite technology being activated. The sequential write
performances for the portion of data exceeding over Intelligent TurboWrite buffer size are: 400 MB/s for 250GB, 900 MB/s for 500GB, 1700 MB/s for
1TB and 1750 MB/s for 2TB. The random write performances for the portion of data exceeding over Intelligent TurboWrite buffer size (tested with QD
32 Thread 4) are: 100,000 IOPS for 250GB, 200,000 IOPS for 500GB, 400,000 IOPS for 1TB and 420,000 IOPS for 2TB. Performance may vary
depending on SSD’s firmware, system hardware & configuration and other factors.
5) Power consumption is measured with IOmeter1.1.0 version with Intel Core i7-7700K @ 4.2GHz, SAMSUNG DDR4 16GB, Gigabyte GA-Z270X, OS –
Windows 10 PRO K x64.
6) All documented endurance test results are in compliance with JESD218 Standards. Please visit www.jedec.org for detailed information on JESD218
Standards
7) TBW means Terabytes Written.
8) Please refer to the detailed warranty statement here at http://www.samsung.com/samsungssd
9) Warranty provides coverage for the stated time period or the TBW, whichever comes first.