Samsung HM160JC, HM121HC-TKY, HM160HC-TKY, HM160JC-TKY, HM080HC-FRC User Manual

4. Partitioning and Formatting the Drive

5. Samsung World Wide Web Site

Refer to your Operating System manual or system manual for partitioning and formatting.

Additional information can be obtained at www.samsunghdd.com.

Go into CMOS screen during the booting of the computer.

For descriptive details of the program, refer to the computer’s user’s manual

1

1

If your computer supports IDE HDD Auto Detection, the hard disk drive will automatically
be detected.

2

If your computer does not support auto detect, go into the User Define Mode and by referring
written information on the product, set the correct settings for Cylinder, Head, and Sector and
if some Bios must be, set the HDD Mode to LBA.

3

Save the changed details and exit.

Make the computer detect the hard disk.

2

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions :
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,

including interference that may cause undesired operation.

Samsung Electronics Co., Ltd. Printed in Korea.

BF68-00190A REV02

This product is a precision designed mechanism and is very sensitive to
shock and electrostatic discharge (ESD). When storing, please avoid high
temperature and humidity and use the origirnal ESD protection package
in which the product was shipped at the time of purchase. Please handle
the product carefully. Damaged or detached labels or any other
components may directly cause product malfunction and void warranty.

Samsung does NOT guarantee any data on your drive, please always
BACK - UP your precious data.

2.5" HDD INSTALLATION GUIDE

Cover opening mechanism and the location of the hard disk drive may vary from one computer to another.

1. Configuring your Hard Disk Drive (Master, Slave)

2. Installing Your Hard Disk Drive

Note: Turn off the system power !

1
2

Connect interface cable. Make sure that the direction of the cables are correct and matches
the shape of the receptacles when connecting cables. Incorrect cable connection may
damage the hard disk drive.

Turn off the computer, unplug the external cables, and open computer cover. Mount the hard
disk drive in the designated place in the computer with screws (M3.0).

Cable / Select

Master Slave

Run the CMOS(BIOS) set-up program to detect the new hard disk drive.

3. Making Computer Detect the New Device

This marking shown on the product or its literature, indicates that it should not be disposed with other
household wastes at the end of its working life. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local
government office, for details of where and how they can take this item for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product should not be mixed with other commercial wastes for disposal.

SAMSUNG ELECTRONICS CO., LTD.
STORAGE SYSTEM DIVISION
HEAD OFFICE: 94-1, IM SOO-DONG,
GUMI-CITY KYUNG BUK, KOREA 730-350

FAX : [phone]

C