Samsung LTM230TT02 Datasheet

ISSUED DATE : 2008-07-18

PRODUCT INFORMATION

SAMSUNG TFT--

SAMSUNG TFT

SAMSUNG TFT-LCD PRODUCT INFORMATION

MODEL : LTM230TT02

www.jxlcd.com

Note : This is Product Information is subject to change after 3 months of issuing date.

LCD PRODUCT INFORMATION

Application Engineering Part1, HD LCD Business

Samsung Electronics Co . , LTD.

1/35PageLTM230TT02MODEL

PRODUCT INFORMATION

Contents

General Description --------------------------------------------------------------------------------- (3)

1. Absolute Maximum Ratings ------------------------------------------------------------------- (4)

2. Optical Characteristics --------------------------------------------------------------------------- (6)

3. Electrical Characteristics ---------------------------------------------------------------------- (11)

3.1 TFT LCD Module

3.2 Back Light Unit

4. Block Diagram ----------------------------------------------------------------------------------- (16)

4.1 TFT LCD Module

4.2 Back Light Unit

5. Input Terminal Pin Assignment -------------------------------------------------------------- (17)

5.1 Input Signal & Power

5.2 LVDS Interface

5.3 Back Light Unit

5.4 Input Signals, Basic Display Colors and Gray Scale of Each Color

PRODUCT INFORMATION

6. Interface Timing --------------------------------------------------------------------------------- (26)

6.1 Timing Parameters (DE only mode)

6.2 Timing Diagrams of interface Signal (DE only mode)

6.3 Power ON/OFF Sequence

6.4 VDD Power Dip Condition

7. Outline Dimension ------------------------------------------------------------------------------- (30)

8. General Precaution ------------------------------------------------------------------------------ (33)

8.1 Handling

8.2 Storage

8.3 Operation

8.4 Others

www.jxlcd.com

2/35PageLTM230TT02MODEL

PRODUCT INFORMATION

General Description

Description

LTM230TT02 is a color active matrix liquid crystal display (LCD) that uses amorphous silicon TFT (Thin Film Transistor) as switching components. This model is composed of a TFT LCD panel, a driver circuit and a back light unit. The resolution of a 23” is 2048 x 1152 and this model can display up to 16.7 millions colors.

Features

 High contrast ratio, high aperture structure, High color gamut(92% NTSC,CIE1976)  TN (Twisted Nematic) mode  Wide Viewing Angle  High speed response  WDXGA (2048 x 1152 pixels) resolution  Low power consumption  DE (Data Enable) only mode  LVDS (Low Voltage Differential Signaling) interface (2pixel/clock)  Compact Size Design  RoHS, TCO 03’ compliance

PRODUCT INFORMATION

Applications

 Workstation & desktop monitors  Display terminals for AV application products  Monitors for industrial machine

* If the module is used to other applications besides the above, please contact SEC

in advance.

General Information

www.jxlcd.com

ARC-Glare (2H), Reflection Ratio 2%Surface Treatment

UnitSpecificationItems mm0.249(H) x 0.249(W)Pixel Pitch mm509.952(H) x 286.848(V)Active Display Area

colors16.7M (Hi-FRC)Display Colors

pixel2,048 x 1,152Number of Pixels

RGB vertical stripePixel Arrangement

Normally WhiteDisplay Mode

Note

typW(34.5W)Power Consumption

cd/㎡300(Typ.)Luminance of White

3/35PageLTM230TT02MODEL

Mechanical Information

PRODUCT INFORMATION

Max.

534.5

Module

size

Note (1) Mechanical tolerance is ± 0.5mm unless there is a special comment.

312.2

18.9

3,050

mm534.0533.5Horizontal (H) mm311.7311.2Vertical (V) w/o inverter ass’y mm--Depth (D)

LCD module onlyg--Weight

NoteUnitTyp.Min.Item

1. Absolute Maximum Ratings

If the condition exceeds maximum ratings, it can cause malfunction or unrecoverable damage to the device.

www.jxlcd.com

Power Supply Voltage

Data Signal

Storage temperature

Center of Glass surface temperature

(Operation)

Shock ( non - operating )

Vibration ( non - operating )

Note (1) Ta= 25 ± 2 °C

DD

sig

STG

OPR

nop

NoteUnitMax.Min.SymbolItem

(1)V6.5GND-0.5V

V5-V

60-25T

500T

℃

(2)

(3)(5)G50-S (4)(5)G1.5-V

4/35PageLTM230TT02MODEL

PRODUCT INFORMATION

(2) Temperature and relative humidity range are shown in the figure below.

a. 90 % RH Max. (Ta ≤ 39 °C) b. Maximum wet-bulb temperature at 39 °C or less. (Ta ≤ 39 °C)

c. No condensation (3) 11ms, sine wave, one time for ±X, ±Y, ±Z axis (4) 10-300 Hz, Sweep rate 10min, 30min for X,Y,Z axis (5) At vibration and shock test, the fixture which holds the module to be tested has to be

hard and rigid enough so that the module would not be twisted or bent by the fixture.

(39,90)

(50,50.4)

(60,27.7)

25,5)

((--25,5)

www.jxlcd.com

Fig. Temperature and Relative humidity range

5/35PageLTM230TT02MODEL

PRODUCT INFORMATION

2. Optical Characteristics

PRODUCT INFORMATION

The optical characteristics should be measured in a dark room or equivalent.

Measuring equipment : SR-3, RD-80S (TOPCON), EZ-Contrast (Eldim)

(Ta = 25 ± 2°C, VDD=5V, fv= 60Hz, fDCLK=77.5MHz, IL = 7.5mArms)

NoteUnitMax.Typ.Min.ConditionSymbolItem

Contrast Ratio

(Center of screen)

Response

Time(On/Off)

Luminance of White

(Center of screen)

Color

Chromaticity

(CIE 1931)

www.jxlcd.com

Red

Green

Blue

White

Red

-1000600C/R

105-Tr + TfOn/Off

L

Normal

θ

=0

L,R

θ

=0

U,D

Viewing

Angle

-300250Y

0.6900.6600.630Rx

0.3550.3250.295Ry

0.2470.2170.187Gx

0.7060.6760.646Gy

0.1760.1460.116Bx

0.1050.0750.045By

0.3330.3130.293Wx

0.3490.3290.309Wy

-0.473-Ru'

-0.524-Rv'

msec

cd/m

2

(3)

SR-3

(5)

RD-80S

(6)

SR-3

(7),(8)

SR-3

Color

Chromaticity

(CIE 1976)

C.G.L

(ACC ONLY)

* C.G.L : Color Grayscale Linearity

Green

Blue

White

△u'v'White

-0.081-Gu'

-0.570-Gv'

-0.162-Bu'

-0.187-Bv'

-0.188-Wu'

-0.404-Wv'

(9)0.02--

6/35PageLTM230TT02MODEL

PRODUCT INFORMATION

NoteUnitMax.Typ.Min.ConditionSymbolItem

%-92--Color Gamut

K-6500--Color Temperature

θ

Hor.

Viewing

Angle

Ver.

Brightness Uniformity

(9 Points)

Note (1) Test Equipment Setup

The measurement should be executed in a stable, windless and dark room between 30min after lighting the back light at the given temperature for stabilization of the back light. This should be measured in the center of screen.

Single lamp current : 7.5mA Environment condition : Ta = 25 ± 2 °C

www.jxlcd.com

L

θ

R

θ

U

θ

D

uni

Field Photo detector

CR≥10

Photo detector

-8070

-8070 Degrees

-8070

%25--B

(8)

EZ-

Contrast

(4)

SR-3

2°SR-3

TFT - LCD Module

Field

SR-3 : 40㎝ RD-80S : 50㎝

LCD Panel

The center of the screen

7/35PageLTM230TT02MODEL

Note (2) Definition of test point

B

−

max

G

min

512 1024 1536

PRODUCT INFORMATION

Active Area

6

: Test Point

Note (3) Definition of Contrast Ratio (C/R)

: Ratio of gray max (Gmax) & gray min (Gmin) at the center point⑤ of the panel

Note (4) Definition of 9 points brightness uniformity

www.jxlcd.com

Buni

= ×

100

3 2 1

G

CR

=

Gmax : Luminance with all pixels white Gmin : Luminance with all pixels black

B B

( max min)

8 79

max

288

45

576

864

Bmax : Maximum brightness Bmin : Minimum brightness

Note (5) Definition of Response time : Sum of Tr, Tf

Display Data White(TFT off) Black(TFT on) White(TFT off)

Optical Instruments

Response

100%

90%

10%

0%

8/35PageLTM230TT02MODEL

PRODUCT INFORMATION

Note (6) Definition of Luminance of White : Luminance of white at center point⑤

Note (7) Definition of Color Chromaticity (CIE 1931, CIE1976)

Color coordinate of Red, Green, Blue & White at center point⑤

Note (8) Definition of Viewing Angle

: Viewing angle range (CR >10)

www.jxlcd.com

9/35PageLTM230TT02MODEL

PRODUCT INFORMATION

Note (9) Color Grayscale Linearity

a. Test image : 100% full white pattern with a test pattern as below b. Test pattern : Squares, 40mm by 40mm in size, filled with 255, 225, 195, 165, 135

and 105 grays steps should be arranged at the center⑤ of the screen.

www.jxlcd.com

c. Test method

-1stgray step : move a square of 255 gray level should be moved into the center of the screen and measure luminance and u’ and v’ coordinates.

- Next gray step : Move a 225 gray square into the center and measure both luminance and coordinates, too.

d. Test evaluation

∆u'v'= (u' -u' ) + (v' -v' )

Where A, B : 2 gray levels found to have the largest color differences between them

i.e. get the largest Δu’ and Δv’ of each 6 pair of u’ and v’ and calculate the Δu’v’.

A B

2

A B

2

10/35PageLTM230TT02MODEL

3. Electrical Characteristics

3.1 TFT LCD Module

The connector for display data & timing signal should be connected.

PRODUCT INFORMATION

Ta = 25°C

NoteUnitMax.Typ.Min.SymbolItem

Voltage of Power Supply

Differential Input

Voltage for LVDS

Receiver Threshold

LVDS skew

LVDS

Input

Characteri

stics

Current of

Power

Supply

Differential input

Input voltage range

(single-ended)

Common mode

www.jxlcd.com

(a) Black

voltage

DD

SKEW

IN

V

CM

I

DD

0+

|VID|/2

1.2

2.4-

|VID|/2

(1)V5.55.04.5V (2)mV+100--High

mV---100Low

(3)ps300-300t

(4)mV600200|VID|

(4)V2.40V

(4)V

mA-1,600mA-1,100-(b) White (5),(6) mA(2,000)1,800-(c) Dot

Vsync Frequency

Hsync Frequency

Main Frequency

Rush Current

Note (1) The ripple voltage should be controlled under 10% of VDD.

V

H

DCLK

RUSH

Hz626049f

kHz73.57157.8f

MHz8178.563.8f

(7)A5.0--I

11/35PageLTM230TT02MODEL

Samsung LTM230TT02 Datasheet

Specifications and Main Features

Frequently Asked Questions

User Manual