SAMSUNG LTI700HD01 Specification
Global LCD Panel Exchange Center
• ••• • • • • • •• • • • • • • •• • • • • • • • • • • • • • • • • • • • • • • • • • • • • •• • • ••• • • • • • • • •• • •• • • • • • • • • • • • • • • • •• • • • • • • • • •
www.panelook.com
Samsung Confidential
Product Information
Product Information
DATE : 08.Mar.2010
SAMSUNG TFT--
SAMSUNG TFT
SAMSUNG TFT-LCD
MODEL
MODEL
MODEL : LTI700HD01
The Information Described in this Specification is Preliminary and can be changed without
prior notice
LCD
LCD
: LTI700HD01
: LTI700HD01
••••••••••••••••••••••
Je-Hwan Oh
DATE
08.Mar.2010
••••••••••••••••••••••
Young-Do Choi
08.Mar.2010
Application Engineering Part 3, LCD Business
Samsung Electronics Co . , LTD.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
DATE
•
www.panelook.com
Global LCD Panel Exchange Center
• ••• • • • • • •• • • • • • • •• • • • • • • • • • • • • • • • • • • • • • • • • • • • • •• • • ••• • • • • • • • •• • •• • • • • • • • • • • • • • • • •• • • • • • • • • •
www.panelook.com
Contents
Samsung Confidential
Revision History -------------------------------------------------------------------------------------------- (3)
General Description --------------------------------------------------------------------------------------- (4)
General Information --------------------------------------------------------------------------------------- (4)
1. Absolute Maximum Ratings -------------------------------------------------------------------------- (5)
2. Application information for DID (Digital Information Display) ---------------------------------- (6)
3. Optical Characteristics --------------------------------------------------------------------------------- (7)
4. Electrical Characteristics ----------------------------------------------------------------------------- (10)
4.1 TFT LCD Module
4.2 Back Light Unit
4.3 Inverter Input & Specification
5. Input Terminal Pin Assignment --------------------------------------------------------------------- (13)
5.1 Input Signal & Power
5.2 Inverter Input Pin Configuration
5.3 Inverter Input Power Sequence
5.4 LVDS Interface
5.5 Input Signals, Basic Display Colors and Gray Scale of Each Color
6. Interface Timing ---------------------------------------------------------------------------------------- (18)
6.1 Timing Parameters (DE only mode)
6.2 Timing Diagrams of interface Signal (DE only mode)
6.3 Power ON/OFF Sequence
7. Outline Dimension -------------------------------------------------------------------------------------- (21)
8. Packing --------------------------------------------------------------------------------------------------- (23)
9. Marking & Others --------------------------------------------------------------------------------------- (24)
10. General Precaution ----------------------------------------------------------------------------------- (25)
10.1 Handling
10.2 Storage
10.3 Operation
10.4 Operation Condition Guide
10.5 Others
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
• ••• • • • • • •• • • • • • • •• • • • • • • • • • • • • • • • • • • • • • • • • • • • • •• • • ••• • • • • • • • •• • •• • • • • • • • • • • • • • • • •• • • • • • • • • •
* Revision History
www.panelook.com
Samsung Confidential
Date
Feb
09,
2009
Apr
06,
2009
Jun
08,
2009
Rev.
No
001
SummaryPage
First issuedall000
Color Gamut Typ : 72% • •77%7
Lamp Voltage Min : 2100Vrms • •935Vrms11
Input Current : Max 24A • •Typ 24A12002
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
• ••• • • • • • •• • • • • • • •• • • • • • • • • • • • • • • • • • • • • • • • • • • • • •• • • ••• • • • • • • • •• • •• • • • • • • • • • • • • • • • •• • • • • • • • • •
www.panelook.com
General Description
Samsung Confidential
Description
LTI700HD01 is a color active matrix liquid crystal display (LCD) that uses amorphous
silicon TFT(Thin Film Transistor) as switching components. This model is composed of a
TFT LCD panel, a driver circuit and a backlight unit. The resolution of a 70.0“ is
1920 x 1080 and this model can display up to 16.7 million colors with wide viewing angle
of 89••or higher in all directions. This panel is intended to support applications to provide a
excellent performance for Flat Panel Display such as Home-alone Multimedia TFT-LCD
TV, Display terminals for AV application products, and Digital Information Display (DID).
Features
RoHS compliance (Pb-free)
High contrast ratio, High aperture ratio, High luminance
SPVA(Super Patterned Vertical Align) mode
Wide viewing angle (• •178••)
High speed response
Portrait / Landscape type compatible
Wide UXGA (1920 x 1080 pixels) resolution (16:9)
Low power consumption
Direct Type 64 CCFTs(Cold Cathode Fluorescent Tube)
DE(Data Enable) mode
LVDS (Low Voltage Differential Signaling) interface (2pixel/clock)
General Information
Module Size
1630.0(W
Haze 44% , Hard-coating (3H)Surface Treatment
RGB vertical stripePixel Arrangement
83.6(D
Normally BlackDisplay Mode
600 (Typ.)Luminance of White
) x 952.0(H
TYP
MAX
UnitSpecificationItems
)
TYP
)
mm
g47,500(Max.)Weight
mm0.807(H) x 0.807(V)Pixel Pitch
mm1549.44(H) x 871.56(V)Active Display Area
colors8 bit - 16.7MDisplay Colors
pixel1920 x 1080Number of Pixels
cd/m
2
Note
••1.0mm
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
• ••• • • • • • •• • • • • • • •• • • • • • • • • • • • • • • • • • • • • • • • • • • • • •• • • ••• • • • • • • • •• • •• • • • • • • • • • • • • • • • •• • • • • • • • • •
1. Absolute Maximum Ratings
If the condition exceeds maximum ratings, it can cause malfunction or unrecoverable
damage to the device.
www.panelook.com
Samsung Confidential
NoteUnitMax.Min.SymbolItem
Power Supply Voltage
Storage temperature
Glass surface
Center
DD
STG
CENTER
temperature
(Operation)
T. Uniformity
Shock ( non - operating )
Vibration ( non - operating )
Note (1) Ta= 25 • •2 ••C
(2) Temperature and relative humidity range are shown in the figure below.
a. 90 % RH Max. (Ta • •39 ••C)
b. Relative Humidity is 90% or less. (Ta > 39 ••C)
c. No condensation
(3) 11ms, sine wave, one time for • •X, • •Y, • •Z axis
(4) 10-300 Hz, Sweep rate 10min, 30min for X,Y,Z axis
••T
nop
nop
-30
(1)V13.2GND-0.5V
60-20T
500T
••
••
(2)
(2),(5)
10-
••
(3)GS
(4)G1.5-V
Fig. Temperature and Relative humidity range
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
• ••• • • • • • •• • • • • • • •• • • • • • • • • • • • • • • • • • • • • • • • • • • • • •• • • ••• • • • • • • • •• • •• • • • • • • • • • • • • • • • •• • • • • • • • • •
www.panelook.com
(5) Definition of test point
Samsung Confidential
5mm
5mm
1
5
••
2
••T should be less than 10• •(• •T = |T
T
CENTER
: Temperature of the center of the glass surface
CENTER–TCORNER
(Test point 5)
T
CORNER
: Temperature of each edge of the glass surface
(Test point 1~4)
LCD Module
43
2. Application information for DID (Digital Information Display)
A long-term display like DID application may cause uneven display including image retention.
To optimize module's lifetime and function, several operating usages are required.
| )
1. Normal operating condition
- Temperature: 20 • •15• •
- Humidity: 55 • •20 %
- Display pattern: moving picture or regular switchover display
Note) Long-term static information image may cause uneven display.
2. Operating usages under abnormal operating condition. Note (1)
a. Ambient condition
- Well-ventilated place is recommended to set up DID system.
b. Power off and screen saver
- Periodical power-off or screen saver is needed after long-term static display. Note (2)
3. Operating usages to protect uneven display due to long-term static information display
a. Suitable operating time for P-DID : under 20 hours a day.
b. Periodical display contents change from static image to moving picture.
- Liquid crystal refresh time is required.
c. Periodical background color and character (image) color change
- Use different colors for background and character (image), respectively.
- Change colors periodically.
d. Avoid combination of background and character with large different luminance.
Note (1) Abnormal condition means every operating condition except normal operating condition.
Note (2) Moving picture or black pattern is strongly recommended for screen saver.
4. Lifetime in this spec is guaranteed only when DID is used under right operating usages.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
• ••• • • • • • •• • • • • • • •• • • • • • • • • • • • • • • • • • • • • • • • • • • • • •• • • ••• • • • • • • • •• • •• • • • • • • • • • • • • • • • •• • • • • • • • • •
www.panelook.com
3. Optical Characteristics
Samsung Confidential
The optical characteristics should be measured in a dark room or equivalent.
Measuring equipment : TOPCON BM-7,SPECTRORADIOMETER SR-3
Contrast Ratio
(Center of screen)
Response
Time
Luminance of White
(Center of screen)
Color
Chromaticity
(CIE 1931)
Rising
Falling
Red
Green
Blue
(Ta = 25 • •2••C, V
TgG-to-G
L
Rx
Normal
TL,R=0
TU,D=0
Viewing
Angle
= 12V, fV= 60Hz, f
DD
TYP.
-0.03
0.654
0.336Ry
0.272Gx
0.610Gy
0.145Bx
0.060By
= 148.5MHz, IL= 11.0mArms)
DCLK
-20001800C/R
1310-Tr
76-Tf
108-
-600500Y
TYP.
+0.03
msec
cd/m
NoteUnitMax.Typ.Min.ConditionSymbolItem
(3)
SR-3
(5)
BM-7
2
(6)
SR-3
(7),(8)
SR-3
White
T
Hor.
Viewing
Angle
Ver.
L
R
U
D
Brightness Uniformity
(9 Points)
uni
Note (1) Test Equipment Setup
The measurement should be executed in a stable, windless and dark room between
40min and 60min after lighting the backlight at the given temperature for stabilization
of the backlight. This should be measured in the center of screen.
Single lamp current : 11.0mA
Environment condition : Ta = 25 • •2 ••C
C/R• •10
0.280Wx
0.290Wy
%-77--Color Gamut
K-10,000--Color Temperature
(7)
SR-3
(7)
SR-3
-8975
-8975T
Degree
-8975T
(8)
SR-3
-8975T
%25--B
(4)
SR-3
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
• ••• • • • • • •• • • • • • • •• • • • • • • • • • • • • • • • • • • • • • • • • • • • • •• • • ••• • • • • • • • •• • •• • • • • • • • • • • • • • • • •• • • • • • • • • •
• •
• •
• • • • • •
•• • •
• •
• •
www.panelook.com
Samsung Confidential
FieldPhoto detector
1• •SR-3
2• •BM-7
TFT - LCD Module
Note (2) Definition of test point
180 540 900
Photo detector
Field
SR-3 : 50• •
BM-7 : 50• •
LCD Panel
The center of the screen
Note (3) Definition of Contrast Ratio (C/R)
: Ratio of gray max (Gmax) & gray min (Gmin) at the center point 㽶 of the panel
G
CR
/
max
G
min
Gmax : Luminance with all pixels white
Gmin : Luminance with all pixels black
0
2
3
960
1600
Active Area
Test Point
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
• ••• • • • • • •• • • • • • • •• • • • • • • • • • • • • • • • • • • • • • • • • • • • • •• • • ••• • • • • • • • •• • •• • • • • • • • • • • • • • • • •• • • • • • • • • •
Note (4) Definition of 9 points brightness uniformity
www.panelook.com
Samsung Confidential
BB
Buni
Bmax : Maximum brightness
Bmin : Minimum brightness
Note (5) Definition of Response time : Sum of Tr, Tf
Display data
Optical Instruments
Response
(max min)
100
100%
90%
10%
0%
B
max
Black (data off)
White (data on)
T
R
White (data off)
T
F
TIME
Note (6) Definition of Luminance of White : Luminance of white at center point 㽶
Note (7) Definition of Color Chromaticity (CIE 1931)
Color coordinate of Red, Green, Blue & White at center point 㽶
Note (8) Definition of Viewing Angle
: Viewing angle range (C/R • •10)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Loading...