SAMSUNG LTI570HH-L01 Specification

Global LCD Panel Exchange Center
X VGY_wW\TWW\TnTW^W`ZWkUGus{p\^WooTsWXtvkls
www.panelook.com
Product Information
Product Information
DATE : 30.Sep.2007
SAMSUNG TFT--
SAMSUNG TFT-LCD
MODEL
MODEL
MODEL : LTI570HH-L01
The Information Described in this Specification is Preliminary and can be changed without prior notice
LCD
LCD
: LTI570HH--
: LTI570HH
L01
L01
hwwyv}lkGi
Nam-Heon Kim
DATE
30.Sep.2007
wylwhylkGi
Yu-Geun Lee
30.Sep.2007
Development Group 3, LCD Business
Samsung Electronics Co . , LTD.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
DATE
www.panelook.com
Global LCD Panel Exchange Center
Y VGY_wW\TWW\TnTW^W`ZWkUGus{p\^WooTsWXtvkls
www.panelook.com
Contents
Revision History -------------------------------------------------------------------------------------------- (3)
General Description --------------------------------------------------------------------------------------- (5)
General Information --------------------------------------------------------------------------------------- (5)
1. Absolute Maximum Ratings -------------------------------------------------------------------------- (6)
2. Application information for I.D. (Information Display) ------------------------------------------- (7)
3. Optical Characteristics --------------------------------------------------------------------------------- (8)
4. Electrical Characteristics ----------------------------------------------------------------------------- (11)
4.1 TFT LCD Module
4.2 Back Light Unit
4.3 Inverter Input & Specification
5. Input Terminal Pin Assignment --------------------------------------------------------------------- (14)
5.1 Input Signal & Power
5.2 Inverter Input Pin Configuration
5.3 Inverter Input Power Sequence
5.4 LVDS Interface
5.5 Input Signals, Basic Display Colors and Gray Scale of Each Color
6. Interface Timing ---------------------------------------------------------------------------------------- (19)
6.1 Timing Parameters (DE only mode)
6.2 Timing Diagrams of interface Signal (DE only mode)
6.3 Power ON/OFF Sequence
7. Outline Dimension -------------------------------------------------------------------------------------- (22)
8. Packing --------------------------------------------------------------------------------------------------- (24)
9. Marking & Others --------------------------------------------------------------------------------------- (25)
10. General Precaution ----------------------------------------------------------------------------------- (26)
10.1 Handling
10.2 Storage
10.3 Operation
10.4 Operation Condition Guide
10.5 Others
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
Z VGY_wW\TWW\TnTW^W`ZWkUGus{p\^WooTsWXtvkls
* Revision History
www.panelook.com
Date
Aug
09,
2006
Aug
12,
2006
Dec
20,
2006
Feb
15,
2007
Apr
02,
2007
Rev.
No
001
002
004
10
12
10
12
18
SummaryPage
First issuedall000
Rush current Typ
Current of power supply
(Typ)
Lamp current range
Inverter frequency range
7
Luminance Min
Current of Power Supply
Internal PWM Dimming function is added
Display pattern: moving picture ˧ moving picture or regular switchover display6
Portrait direction note is added. 10.5 (b)27
Black
White
N-Pattern
TBD ˧ 5.5A
Black pattern : TBD ˧ 1400mA Mosaic pattern :TBD ˧ 1650mA N-Pattern : TBD ˧ 2020mA
1800V ~ 2100V ˧ 1850V ~ 2050VLamp Voltage range11
TBD ˧ 17AInverter Input current Max
6.0mA ~ 7.0mA ˧ 5.5mA ~ 6.5mA
46kHz ~ 56kHz ˧ 45kHz ~ 55kHz
120Hz ~ 240Hz ˧ 120Hz ~ 180HzPWM Frequency range
30,000g ˧ 30,600gWeight4
TBD ˧ 1000Contrast Ratio Min
TBD ˧ 500cd/m
1400mA ˧ 1180mA
1650mA ˧ 1150mA
2020mA ˧ 1200mA
TBD ˧ 50Hz ~ 62HzVsync Frequency Range
TBD ˧ 60kHz ~ 70kHzHsync Frequency Range
TBD ˧ 120MHz ~ 154MHzMain Frequency Range
TBD ˧ 5ARush Current Max
1850V ~ 2050V ˧ 1976V ~ 2184VLamp Voltage range11
17A ˧ 21AInverter Input Current Max
DCC Option ˧ No ConnectionPin #4613
No Connection ˧ Internal PWM DimmingPin #1315
TBD ˧ 120MHz ~ 154MHzClock Range
TBD ˧ 60kHz ~ 70kHzHsync Range
TBD ˧ 50Hz ~ 62HzVsync Range
TBD ˧ 1092lines ~ 1158linesVertical Total Range
TBD ˧ 2016clocks ~ 2400clocksHorizontal Total Range
276.5Kg ˧ 281.3KgTotal Pallet Weight23
45kHz ~ 55kHz ˧ 45kHz ~ 52kHzInverter frequency range12003
2
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
[ VGY_wW\TWW\TnTW^W`ZWkUGus{p\^WooTsWXtvkls
* Revision History
www.panelook.com
Date
Sep
30,
2007
Rev.
No
005
11
19
SummaryPage
Haze5
Contrast Ratio8
Min
Typ
40% ˧ 44%
1000 ˧ 1500
1200 ˧ 2000
120MHz ~ 154MHz ˧ 120MHz ~ 160MHzMain Frequency Range
60kHz ~ 70kHz ˧ 55kHz ~ 72kHzHsync Frequency Range
No Connection ˧ LVDS OptionPin #4514
120MHz ~ 154MHz ˧ 120MHz ~ 160MHzClock Frequency Range
60kHz ~ 70kHz ˧ 55kHz ~ 72kHzHsync Frequency Range
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
\ VGY_wW\TWW\TnTW^W`ZWkUGus{p\^WooTsWXtvkls
General Description
Description
LTI570HH-L01. is a color active matrix liquid crystal display (LCD) that uses amorphous silicon TFT(Thin Film Transistor) as switching components. This model is composed of a TFT LCD panel, a driver circuit and a back light unit. The resolution of a 57.0“ is 1920 x 1080 and this model can display up to 16.7 million colors with wide viewing angle of 89or higher in all directions. This panel is intended to support applications to provide a excellent performance for Flat Panel Display such as Home-alone Multimedia TFT-LCD TV, Display terminals for AV application products, and Digital Information Display (DID).
Features
RoHS compliance (Pb-free)High contrast ratio, High aperture ratio, High luminanceSPVA(Super Patterned Vertical Align) modeWide viewing angle (·178¶)High speed responseLandscape / Portrait type compatibleWXGA (1920 x 1080 pixels) resolution (16:9)Low Power consumptionDirect Type 36 CCFTs(Cold Cathode Fluorescent Tube)DE(Data Enable) modeLVDS (Low Voltage Differential Signaling) interface (2pixel/clock)
www.panelook.com
General Information
Module Size
1328.0(W
Haze 44% , Hard-coating (3H)Surface Treatment
RGB vertical stripePixel Arrangement
64.5(D
Normally BlackDisplay Mode
600 (Typ.)Luminance of White
) x 764.0(H
TYP
MAX
UnitSpecificationItems
)
TYP
)
mm
g31,100(Max.)Weight
mm0.65175(H) x 0.65175(V)Pixel Pitch
mm1251.36(H) x 703.89(V)Active Display Area
colors8 bit - 16.7MDisplay Colors
pixel1920 x 1080Number of Pixels
cd/m
2
Note
·1.0mm
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
] VGY_wW\TWW\TnTW^W`ZWkUGus{p\^WooTsWXtvkls
1. Absolute Maximum Ratings
If the condition exceeds maximum ratings, it can cause malfunction or unrecoverable
damage to the device.
www.panelook.com
NoteUnitMax.Min.SymbolItem
Power Supply Voltage
Storage temperature
Glass surface
Center
DD
STG
OPR
temperature
(Operation)
T. Uniformity
Shock ( non - operating )
Vibration ( non - operating )
Note (1) Ta= 25 · 2 ¶C
(2) Temperature and relative humidity range are shown in the figure below.
a. 90 % RH Max. (Ta ˺ 39 ¶C) b. Relative Humidity is 90% or less. (Ta > 39 ¶C) c. No condensation
(3) 11ms, sine wave, one time for ·X, ·Y, ·Z axis (4) 10-300 Hz, Sweep rate 10min, 30min for X,Y,Z axis
T
nop
nop
-30
(1)V13.2GND-0.5V
60-20T
500T
(2)
(2),(5)
10-
(3)GS
(4)G1.5-V
Fig. Temperature and Relative humidity range
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
^ VGY_wW\TWW\TnTW^W`ZWkUGus{p\^WooTsWXtvkls
(5) Definition of test point
www.panelook.com
5mm
5mm
12
5
LCD Module (Active)
3
T
: Temperature of the center of the glass surface (Test point 5)
OPR
T1 ~ T4 : Temperature of each edge of the glass surface
: The highest temperature of the glass surface
T
MAX
4
2. Application information for I.D. (Information Display)
Generally large-sized LCD modules are designed for TV applications. A long-term display like DID application can cause uneven display including image retention. To optimize module's lifetime and function, several operating usages are required.
1. Normal operating condition
- Temperature: 20 · 15୅
- Humidity: 65 · 20 %
- Display pattern: moving picture or regular switchover display
Note) Long-term static information image may cause uneven display.
2. Operating usages under abnormal operating condition. Note (1) a. Ambient condition
- Well-ventilated place is recommended to set up I.D. system.
b. Power off and screen saver
- Periodical power-off or screen saver is needed after long-term static display. Note (2)
3. Operating usages to protect uneven display due to long-term static information display a. Suitable operating time: under 18 hours a day. b. Static information display is recommended to use moving picture periodically.
- Change display to moving picture for 10 seconds after 5 minutes static information display.
c. Background and character (image) color change
- Use different colors for background and character (image), respectively.
- Change colors periodically.
d. Avoid combination of background and character with large different luminance.
Note (1) Abnormal condition means every operating condition except normal operating condition. Note (2) Moving picture or black pattern is strongly recommended for screen saver.
4. Lifetime in this spec is guaranteed only when I.D. is used under operating usages.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
_ VGY_wW\TWW\TnTW^W`ZWkUGus{p\^WooTsWXtvkls
3. Optical Characteristics
The optical characteristics should be measured in a dark room or equivalent.
Measuring equipment :
TOPCON BM-7,SPECTRORADIOMETER SR-3
www.panelook.com
Contrast Ratio
(Center of screen)
Response
Time
Luminance of White
(Center of screen)
Color
Chromaticity
(CIE 1931)
Rising
Falling
Red
Green
Blue
White
(Ta = 25 · 2¶C, VDD = 12V, fv = 60Hz, f
TgG-to-G
L
Rx
Normal
TL,R=0
TU,D=0
Viewing
Angle
TYP.
-0.03
0.648
0.333Ry
0.271Gx
0.592Gy
0.141Bx
0.066By
0.280Wx
0.290Wy
= 148.5MHz, IL= 6.0mArms)
DCLK
-20001500C/R
103.5-Tr
104.5-Tf
-8-
-600500Y
msec
cd/m
2
SR-3
BM-7
(7),(8)
NoteUnitMax.Typ.Min.ConditionSymbolItem
(3)
(5)
(6)
SR-3
SR-3
T
Hor.
Viewing
Angle
Ver.
Brightness Uniformity
(9 Points)
L
R
U
D
uni
Note (1) Test Equipment Setup
The measurement should be executed in a stable, windless and dark room between 40min and 60min after lighting the back light at the given temperature for stabilization of the back light. This should be measured in the center of screen.
Single lamp current : 6.0mA Environment condition : Ta = 25 · 2 ¶C
C/R˻10
%-72--Color Gamut
K-10,000--Color Temperature
-8975
-8975T Degree
-8975T
-8975T
%25--B
(7)
SR-3
(7)
SR-3
(8)
SR-3
(4)
SR-3
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
` VGY_wW\TWW\TnTW^W`ZWkUGus{p\^WooTsWXtvkls
www.panelook.com
Field Photo detector
1°SR-3
2°BM-7
TFT - LCD Module
Note (2) Definition of test point
320 960 1600
Photo detector
Field
SR-3 : 50 BM-7 : 50
LCD Panel
The center of the screen
180
540
900
Note (3) Definition of Contrast Ratio (C/R)
: Ratio of gray max (Gmax) & gray min (Gmin) at the center point of the panel
CR
/
G
max
G
min
Gmax : Luminance with all pixels white Gmin : Luminance with all pixels black
Active Area
Test Point
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Loading...
+ 19 hidden pages