LTI550HN03 is a color active matrix liquid crystal display(LCD) that uses amorphous silicon
TFT(Thin Film Transistor) as switching components. This model is composed of a TFT LCD panel,
a driver circuit and a back light unit. The resolution of a 55.0“ is 1920 x 1080 and this model can
display up to 16.7 Million colors with wide viewing angle of 89° or higher in all directions. This
panel is intended to support applications to provide a excellent performance for Flat Panel Display
such as Home-alone Multimedia TFT-LCD TV, Display terminals for AV application products, and
Digital Information Display (DID).
Features
RoHS compliance (Pb-free)
High contrast ratio & aperture ratio with wide color gamut
SVA(Super Vertical Align) mode
Wide viewing angle (±178°)
Landscape / Portrait compatible
FHD(1920 x 1080) resolution (16:9)
High Tni Liquid crystal (85℃)
Low Power consumption
Direct Type 18 CCFLs(Cold Cathode Fluorescent Lamp)
DE(Data Enable) mode
2ch LVDS (Low Voltage Differential Signaling) interface (2pixel/clock)
General Information
ItemsSpecificationUnitNote
Module Size
Weight23,000 (Max)g
Pixel Pitch0.630(H) x 0.630(W)mm
Active Display Area1209.6(H) X 680.4(V)mm
Surface TreatmentHaze 44%, Anti Glare
Display Colors16.7 Millioncolors
Number of Pixels1920 x 1080pixel
Pixel ArrangementRGB vertical stripe
Display ModeNormally Black
Luminance of White700 (Typ.)cd/m
1,242.2 (H) X 713.0 (V)
68.5 (Typ)
mm
±1.0mm
2
MODELLTI550HN03Doc. No05-001-G-111223Page/ 28
4
Samsung Secret
1. Absolute Maximum Ratings
If the condition exceeds maximum ratings, it can cause malfunction or unrecoverable
damage to the device.
ItemSymbolMin.Max.UnitNote
Power Supply VoltageV
Storage temperatureT
Glass Surface temperature
(Operation)
T
center
DD
STG
10.813.2V(1)
-2065
050
℃
℃
(2), (5)
Shock ( non - operating )X,Y,Z30G(3)
Vibration ( non - operating )V
Note (1) Ta= 25 ± 2 °C
(2) Temperature and relative humidity range are shown in the figure below.
a. 90 % RH Max. (Ta ≤ 39 °C)
b. Relative Humidity is 90% or less. (Ta >39 °C)
c. No condensation
(3) 11ms, sine wave, one time for ±X, ±Y, ±Z axis
(4) 10-300 Hz, Sweep rate 10min, 30min for X,Y,Z axis
NOP
-1.5G(4)
(2)
Fig. Temperature and Relative humidity range
MODELLTI550HN03Doc. No05-001-G-111223Page/ 28
5
(5) Definition of test point
5mm
Samsung Secret
5mm
1
LCD Module (Active)
T
CENTER
: Temperature of the center of the glass surface (Test point 1)
2. Application information for DID (Digital Information Display)
A long-term display like DID application may cause uneven display including image retention.
To optimize module's lifetime and function, several operating usages are required.
1. Normal operating condition
- Temperature: 20 ± 15℃
- Humidity: 55 ± 20 %
- Display pattern: moving picture or regular switchover display
Note) Long-term static information image may cause uneven display.
2. Operating usages under abnormal operating condition. Note (1)
a. Ambient condition
- Well-ventilated place is recommended to set up DID system.
b. Power off and screen saver
- Periodical power-off or screen saver is needed after long-term static display. Note (2)
3. Operating usages to protect uneven display due to long-term static information display
a. Suitable operating time for P-DID : under 20 hours a day.
b. Periodical display contents change from static image to moving picture.
- Liquid crystal refresh time is required.
c. Periodical background color and character (image) color change
- Use different colors for background and character (image), respectively.
- Change colors periodically.
d. Avoid combination of background and character with large different luminance.
Note (1) Abnormal condition means every operating condition except normal operating condition.
Note (2) Moving picture or black pattern is strongly recommended for screen saver.
4. Lifetime in this spec is guaranteed only when DID is used under right operating usages.
MODELLTI550HN03Doc. No05-001-G-111223Page/ 28
6
3. Optical Characteristics
The optical characteristics should be measured in a dark room or equivalent.
Measuring equipment : TOPCON BM-7, TOPCON BM-5A, Spectrometer SR-3
(Ta = 25 ± 2°C, VDD=12V, fv= 60Hz, f
ItemSymbolConditionMin.Typ.Max.UnitNote
= 148.5MHz, Lamp current = 13mA)
DCLK
Samsung Secret
Contrast Ratio
(Center of screen)
Response
Time
G-to-GTg
Luminance of White
(Center of screen)
Red
C/R25004000-
-816msec
Y
L
Rx
Ry0.330
Normal
qL,R =0
600700-cd/m
0.642
qU,D =0
Gx0.287
Color
Chromaticity
(CIE 1931)
Green
Blue
Gy0.606
Bx0.146
Viewing
Angle
TYP.
-0.03
TYP.
+0.03
By0.061
Wx0.280
White
Wy0.290
Color Gamut--72-%
Color Temperature--10,000-K
(3)
SR-3
(5)
BM-7
2
(6)
SR-3
(7),(8)
SR-3
(7)
SR-3
(7)
SR-3
Hor.
Viewing
Angle
Ver.
Brightness Uniformity
(9 Points)
q
L
q
R
q
U
q
D
B
uni
C/R≥10
7589-
7589-
Degree
7589-
7589-
--25%
(8)
SR-3
(4)
SR-3
Note (1) Test Equipment Setup
The measurement should be executed in a stable, windless and dark room between
40min and 60min after lighting the back light at the given temperature for stabilization
of the back light. This should be measured in the center of screen.
Single lamp current : 13 mA
Environment condition : Ta = 25 ± 2 °C
MODELLTI550HN03Doc. No05-001-G-111223Page/ 28
7
Photo detectorField
Samsung Secret
Photo detector
SR-3
BM-7
TFT - LCD Module
Note (2) Definition of test point
180
540
2°
2°
3209601600
⑨
⑥
Field
The center of the screen
⑧
⑦
⑤④
SR-3 : 50㎝
BM-7 : 50㎝
LCD Panel
Active Area
Test Point
900
Note (3) Definition of Contrast Ratio (C/R)
: Ratio of gray max (Gmax) & gray min (Gmin) at the center point ⑤ of the panel
max
G
/
C R
min
G
Gmax : Luminance with all pixels white
Gmin : Luminance with all pixels black
Note (4) Definition of 9 points brightness uniformity
Buni
(maxmin)
100
BB
Bmax : Maximum brightness
Bmin : Minimum brightness
B
max
MODELLTI550HN03Doc. No05-001-G-111223Page/ 28
①②③
8
Samsung Secret
Note (5) Definition of Response time : Average response time of all Gray to Gray