10. GENERAL PRECAUTIONS ………………………………………………………………………………………..27
——————————————————————————————————————————————––—
Doc.No. LTI460HN07 Page 2 of 29 Rev.No. 06-P00-G-120713
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
————————————————————————————————————————————————–
REVISION HISTORY
Date. Rev.No. Page Revision Description
12/07/13 P00 All Initial Release
——————————————————————————————————————————————––—
Doc.No. LTI460HN07 Page 3 of 29 Rev.No. 06-P00-G-120713
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
————————————————————————————————————————————————–
GENERAL DESCRIPTION
DESCRIPTION
LTI460HN07 is a color active matrix liquid crystal display (LCD) that uses amorphous silicon TFT(Thin Film
Transistor) as switching components. This model is composed of a TFT LCD panel, a driver circuit and a
backlight unit. The resolution of a 46“ is 1920 x 1080 and this model can display up to 16.7M colors with wide
viewing angle of 89° or higher in all directions. This panel is intended to support applications to provide a
excellent performance for Flat Panel Display such as Home-alone Multimedia TFT-LCD TV, Display terminals
for AV application products, and Digital Information Display (DID).
FEATURES
RoHS compliance (Pb-free)
High contrast ratio, High luminance
SPVA(Super Patterned Vertical Align) mode
Wide viewing angle (±178°)
1920 x 1080 pixels) resolution (16:9)
Low power consumption
Direct LED Backlight
DE(Data Enable) mode
LVDS (Low Voltage Differential Signaling) interface
Super Narrow Bezel
Landscape / Portrait type compatible
APPLICATIONS
DID(Digital Information Display)
If the intent to use this product is for other purpose, please contact Samsung Display.
GENERAL INFORMATION
Items Specification Unit Note
Module Size 1023.98(W
Pixel Pitch 0.53025(H) x 0.53025(V) mm
Active Display Area 1018.08(H) x 572.67(V) mm
Surface Treatment Haze 44% Anti-Glare
Display Colors 8 bit - 16.7M colors
Number of Pixels 1920 X 1080 pixel 16 : 9
Pixel Arrangement RGB vertical stripe
Display Mode Normally Black
Luminance of White 450 (Typ.) cd/m2
) x 578.57(H
typ
39.6 (DMAX) ±1.0mm
) mm ±1.3mm
typ
——————————————————————————————————————————————––—
Doc.No. LTI460HN07 Page 4 of 29 Rev.No. 06-P00-G-120713
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
————————————————————————————————————————————————–
MECHANICAL INFORMATION
Item Min. Typ. Max. Unit Note
Horizontal(H)1022.68 1023.98 1025.28 mm ±1.3
Module size
Vertical(V) 577.27 578.57 579.87 mm ±1.3
Depth(D) 37.6 38.6 39.6 Mm ±1.0
Weight 13,000 14,000 15,000 g
——————————————————————————————————————————————––—
Doc.No. LTI460HN07 Page 5 of 29 Rev.No. 06-P00-G-120713
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
————————————————————————————————————————————————–
1. ABSOLUTE MAXIMUM RATINGS
1.1 ENVIRONMENTAL ABSOLTE RATINGS
Item Symbol Min. Max. Unit Note
Storage Temperature T
Operating Temperature T
Glass surface
Temperature
(Operation)
Note (1) Ta= 25 ± 2 °C
(2) Temperature and relative humidity range are shown in the figure below.
a. 90 % RH Max. (Ta 39 °C)
b. Relative Humidity is 90% or less. (Ta > 39 °C)
c. No condensation
Center T
T. Uniformity
-20 65
STG
0 50
CENTER
0 50
CENTER
T
- 10
(1)
(1),(2)
(1),(2),
(3) Module Vibration and shock tests are not guaranteed due to SNB model’s characteristics
——————————————————————————————————————————————––—
Doc.No. LTI460HN07 Page 6 of 29 Rev.No. 06-P00-G-120713
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
————————————————————————————————————————————————–
1.2 ELECTRICAL ABSOLUTE RATINGS
(1) TFT LCD MODULE
Item Symbol Min. Max. Unit Note
Power Supply Voltage
Note (1) Within Ta (25 r 2 qC )
(2) The permanent damage or defect to the device may occur if the panel is operated at the figure set,
which exceeds a limit of maximum value stated in the former spec. The functional operation should
be limited to the conditions described above under normal operating conditions.
(2) BACK LIGHT UNIT
Item
Input Supply
Voltage /
Converter
Symbol
Vcc
V
10.8 13.2
DD
Min.Max.UnitNote
22 26 V
V (1)
LED CurrentILED
- 53.5 mAmean
Continuous operation
@String
(1 String/PCB)
Operating Current 400mA
——————————————————————————————————————————————––—
Doc.No. LTI460HN07 Page 7 of 29 Rev.No. 06-P00-G-120713
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
————————————————————————————————————————————————–
2.Application Information for DID(Digital Information Display)
A DID’s screen may display the sudden image such as an image retention.
To extend the lifetime and optimize a function of module, the below-mentioned operating
conditions are required.
1. Normal operating condition
a. Temperature: 20 ±15ଇ
b. Humidity: 55 ±20 %
c. Display pattern: Moving image or image, which switches regularly
Note) The sudden image on the screen can be displayed after the static image is shown in the long-term.
2. The operating conditions when the module is operated under the abnormal condition.
a. Ambient condition
-It is recommended to set the DID up in the well-ventilated place.
b. The function of power off and screen saver
-The function of periodical power-off or a screen saver is needed when the static image is displayed in the
long-term.
3. Operating conditions to prevent the sudden display resulted from displaying the static
image in the long-term.
a. The proper operating time: Under 20 hours a day.
b. The moving image shall be inserted between the static displays periodically.
-The refresh time for liquid crystal is needed.
c. The periodic changing of background color and character’s color(image)
-Use the different color for background and character (image) respectively.
-Change colors periodically.
d. Avoid combining the color for background with the color for character, which has a largely different
luminance.
Note (1) Abnormal condition means all operating condition except normal operating condition.
Note (2) The moving image or black pattern is strongly recommended as a screen saver.
4. Only the lifetime of DID stated in this spec is guaranteed if the DID is used under the
proper operating conditions.
——————————————————————————————————————————————––—
Doc.No. LTI460HN07 Page 8 of 29 Rev.No. 06-P00-G-120713
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
————————————————————————————————————————————————–
3. OPTICAL CHARACTERISTICS
The following items are measured under the stable conditions.* The optical characteristics should be measured
in the dark room or the equivalent environment by the methods shown in the Note (5).