SAMSUNG LTI460HN06 Specification

Product Specification

( ) Preliminary Specification
( √ ) Approval Specification

Any modification of Spec is not allowed without SDC’s permission

CUSTOMER General Account

DATE OF ISSUE 2012.08.08 EXTENSION CODE 0

MODEL NO. LTI460HN0

Customer Approval & Feedback

Approved by

12/08/08

Jonathan Kang

Prepared by

12/08/08

6

LCD Sales & Marketing Team

Samsung Display Co., Ltd

————————————————————————————————————————————————–

Table of Contents

REVISION HISTORY ……………………………………………………………………………………… ……………. 3

GENERAL DESCRIPTION ...…………………………………………………………………………………………… 4

1. ABSOLUTE MAXIMUM RATINGS

1.1 ENVIRONMENTAL ABSOLUTE RATINGS ………………………………………………………… 6

1.2 ELECTRICAL ABSOLUTE RATINGS …………………………………………………………………. 7

1.3 THE OTHERS ABSOLUTE RATINGS ………………………………………………………………. 7

2. APPLICATION INFORMATION FOR DID(DIGITAL INFORMATION DISPLAY) ……………….…….. 8

3. OPTICAL CHARACTERISTICS …………………………………………………………………………………… 9

4. ELECTRICAL CHARACTERISTICS

4.1 TFT LCD MODULE ………………………………………………………………………………………. 12

4.2 BACK LIGHT UNIT ……………………………………………………………………………………… 13

4.3 CONDITION & SPECIFICATION OF CONVERTER’S INPUT……………….…………………… 13

5. INPUT TERMINAL PIN ASSIGNMENT

5.1 INPUT SIGNAL & POWER ………………………………………………………………………….... 14

5.2 LED PIN CONFIGURATION …………………………………………………………………………… 16

5.3 LED BAR STRUCTURE …………………………………………………………................................ 16

5.4 LVDS INTERFACE ……………………………………………………………………………………….. 17

5.5 INPUT SIGNALS, BASIC DISPLAY COLORS AND GRAY SCALE …………………………….. 18

6. INTERFACE TIMING

6.1 TIMING PARAMETERS (DE ONLY MODE) ……………………………………………………..... 19

6.2 TIMING DIAGRAMS OF INTERFACE SIGNAL (DE ONLY MODE) …………………………... 20

6.3 CHARACTERISTICS OF INPUT DATA OF LVDS …………………………………………………. 21

6.4 THE SEQUENCE OF POWER ON AND OFF ……………………………………………………..... 22

7. OUTLINE DIMENSION …………………………………………………………………………………………….. 23

8. RELIABILITY TEST ………………………………………………………………………………………………....... 25

9. PACKING …………………………………………………………………………………………………………....... 26

10. MARKINGS & OTHERS …………………………………………………………………………………………. 27

11. GENERAL PRECAUTIONS ……………………………………………………………………………………….. 29

——————————————————————————————————————————————––—

Doc.No. -0 Page 2 of 30 Rev.No. 06-000-G-120808

LTI460HN06

————————————————————————————————————————————————–

REVISION HISTORY

Date Rev.No. Page Revision Description

08/08/2012 000 All First issued

——————————————————————————————————————————————––—

Doc.No. -0 Page 3 of 30 Rev.No. 06-000-G-120808

LTI460HN06-

————————————————————————————————————————————————–

GENERAL DESCRIPTION

DESCRIPTION

460HN06

LTI is a color active matrix liquid crystal display (LCD) that uses amorphous silicon TFT(Thin Film
Transistor) as switching components. This model is composed of a TFT LCD panel, a driver circuit and a
backlight unit. The resolution of a 46“ is 1920 x 1080 and this model can display up to 16.7M colors with wide
viewing angle of 89° or higher in all directions. This panel is intended to support applications to provide a
excellent performance for Flat Panel Display such as Home-alone Multimedia TFT-LCD TV, Display terminals
for AV application products, and Digital Information Display (DID).

FEATURES

 RoHS compliance (Pb-free)
 High contrast ratio, High luminance
 SVA(Super Vertical Align) mode
 Wide viewing angle (± 178°)
 1920 x 1080 pixels) resolution (16:9)
 Low power consumption
 Direct LED Backlight
 DE(Data Enable) mode
 LVDS (Low Voltage Differential Signaling) interface
 Super Narrow Bezel
 Landscape / Portrait type compatible

APPLICATIONS

DID(Digital Information Display)
If the intent to use this product is for other purpose, please contact Samsung Display.

GENERAL INFORMATION

Items Specification Unit Note

Module Size

Weight 15,000 g MAX
Pixel Pitch 0.53025(H) x 0.53025(V) mm
Active Display Area 1018.08(H) x 572.67(V) mm
Surface Treatment Haze 44% Anti-Glare
Display Colors 8 bit - 16.7M colors
Number of Pixels 1920 X 1080 pixel 16 : 9
Pixel Arrangement RGB vertical stripe
Display Mode Normally Black

Luminance of White

1023.98(Wtyp) x 578.57(Htyp)

39.6 (DMAX) ± 1.0mm

700 (Typ.)

mm

cd/㎡

± 1.3mm

——————————————————————————————————————————————––—

Doc.No. Page 4 of 30 Rev.No. 06-000-G-120808

-0LTI460HN06-

————————————————————————————————————————————————–

MECHANICAL INFORMATION

Item Min. Typ. Max. Unit Note

Horizontal(H) 1022.68 1023.98 1025.28 mm ± 1.3

Module size

Bezel Open

Black Matrix

Shift

NOTE (1) Measure the figure for Black Matrix shift to be recorded on the spec. with referring to the drawings.

Vertical(V) 577.27 578.57 579.87 mm ± 1.3

Depth(D) 37.6 38.6 39.6 mm ± 1.0

Horizontal(H) 1016.98 1018.28 1019.58 mm

Vertical(V) 571.57 572.87 574.17 mm

Horizontal(H)

Vertical(V)

Weight 13,000 14,000 15,000 g

| A - B | ≤ Horizontal Spec
| C - D | ≤ Vertical Spec

2.0
mm(1)

2.0

<Module Depth Measure Point>

——————————————————————————————————————————————––—

Doc.No. Page 5 of 30 Rev.No. 06-000-G-120808

-0LTI460HN06-

————————————————————————————————————————————————–

1. ABSOLUTE MAXIMUM RATINGS

1.1 ENVIRONMENTAL ABSOLTE RATINGS

Item Symbol Min. Max. Unit Note

Storage Temperature T

Operating Temperature T

Glass surface
Temperature

(Operation)

Note (1) Ta= 25 ± 2 °C
(2) Temperature and relative humidity range are shown in the figure below.
a. 90 % RH Max. (Ta ≤ 39 °C)

b. Relative Humidity is 90% or less. (Ta > 39 °C)

c. No condensation

Center T

T.

Uniformity

-20 65

STG

0 50

CENTER

0 50

CENTER

△T

- 10

℃

℃

℃

℃

(1)

(1),(2)

(1),(2),

(3) Module Vibration and shock tests are not guaranteed due to SNB model’s characteristics

——————————————————————————————————————————————––—

Doc.No. Page 6 of 30 Rev.No. 06-000-G-120808

-0LTI460HN06-

————————————————————————————————————————————————–

1.2 ELECTRICAL ABSOLUTE RATINGS

(1) TFT LCD MODULE

Item Symbol Min. Max. Unit Note

Power Supply Voltage

Note (1) Within Ta (25  2 C )

(2) The permanent damage or defect to the device may occur if the panel is operated at the figure set,

which exceeds a limit of maximum value stated in the former spec. The functional operation should

be limited to the conditions described above under normal operating conditions.

(2) BACK LIGHT UNIT

Item Symbol Min. Max. Unit Note

Input Supply

Voltage /

Converter

Vcc

VDD 10.8 13.2

22 26 V

V (1)

1.3 The Others Absolute Ratings

STATIC ELECTRICITY PRESSURE RSISTANCE

Item Symbol Min.

CONTACT DISCHARGE

AIR DISCHARGE

——————————————————————————————————————————————––—

Doc.No. Page 7 of 30 Rev.No. 06-000-G-120808

-0LTI460HN06-

150pF, 330,  10kV, 200points, 1 time/point
150pF, 330,  20kV, 200points, 1 time/point

Operating
Operating

————————————————————————————————————————————————–

2. Application Information for DID(Digital Information Display)

A DID’s screen may display the sudden image such as an image retention.
To extend the lifetime and optimize a function of module, the below-mentioned operating
conditions are required.

1. Normal operating condition

a. Temperature: 20 ± 15℃
b. Humidity: 55 ± 20 %
c. Display pattern: Moving image or image, which switches regularly

Note) The sudden image on the screen can be displayed after the static image is shown in the long-term.

2. The operating conditions when the module is operated under the abnormal condition.

a. Ambient condition

-It is recommended to set the DID up in the well-ventilated place.

b. The function of power off and screen saver

-The function of periodical power-off or a screen saver is needed when the static image is displayed in the
long-term.

3. Operating conditions to prevent the sudden display resulted from displaying the static
image in the long-term.

a. The proper operating time: Under 20 hours a day.
b. The moving image shall be inserted between the static displays periodically.

-The refresh time for liquid crystal is needed.

c. The periodic changing of background color and character’s color (image)

-Use the different color for background and character (image) respectively.

-Change colors periodically.

d. Avoid combining the color for background with the color for character, which has a largely different

luminance.
Note (1) Abnormal condition means all operating condition except normal operating condition.
Note (2) The moving image or black pattern is strongly recommended as a screen saver.

4. Only the lifetime of DID stated in this spec is guaranteed if the DID is used under the
proper operating conditions.

——————————————————————————————————————————————––—

Doc.No. Page 8 of 30 Rev.No. 06-000-G-120808

-0LTI460HN06-

————————————————————————————————————————————————–

3. OPTICAL CHARACTERISTICS

The following items are measured under the stable conditions.* The optical characteristics should be measured
in the dark room or the equivalent environment by the methods shown in the Note (5).

Measuring equipment : TOPCON RD-80S, TOPCON SR-3, ELDIM EZ-Contrast

Ta = 25  2 C, VLCD_VCC =3.3V, fv= 60Hz, fDCLK = 148.5MHz, IF = 100% duty

Item Symbol Condition Min. Typ. Max. Unit Note

Contrast Ratio

(Center of screen)

Response

Time

Luminance of White

(Center of screen)

Color

Chromaticity

(CIE 1931)

Color Gamut -

Color Temperature -

G-to-G

(AVG)

Red

Green

Blue

White

C/R

Tg - 8 15 msec

YL 400 450 - cd/m2

Normal

Rx

Ry 0.335

Gx 0.310

Gy 0.597

Bx 0.151

By 0.068

Wx 0.280

Wy 0.290

θ L,R=0

θ U,D=0

Viewing

Angle

2500 3500 -

0.646

TYP.

-0.03

- 69 - %

- 10000 - K

TYP.

+0.03

(1)

SR-3

(3)

RD-80S

(4)

SR-3

(5),(6)

SR-3

(5)

SR-3

L

Hor.

Viewing

Angle

Ver.

Brightness Uniformity

(9 Points)

——————————————————————————————————————————————––—

Doc.No. Page 9 of 30 Rev.No. 06-000-G-120808

θ

R

θ

U

θ

D

θ

B

uni

C/R≥10

-0LTI460HN06-

75 89 -

75 89 -

Degree

75 89 -

75 89 -

- - 25 %

(6)

SR-3

EZ-Contrast

(2)

SR-3