SAMSUNG LTI460AA04 Specification

Global LCD Panel Exchange Center

X VGY^wW\TWWXTnTW`WZX_kUGus{p[]WhhW[tvkls

www.panelook.com

Product Information

DATE : 18.Mar.2009

SAMSUNG TFT--

SAMSUNG TFT

SAMSUNG TFT-LCD

MODEL

MODEL : LTI460AA04

The Information Described in this Specification is Preliminary and can be changed without prior notice

LCD

: LTI460AA04

hwwyv}lkGi

Je-Hwan Oh

DATE

18.Mar.2009

wylwhylkGi

Yu-Geun Lee

18.Mar.2009

Application Engineering Part 4, LCD Business

Samsung Electronics Co . , LTD.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

DATE

www.panelook.com

Global LCD Panel Exchange Center

Y VGY^wW\TWWXTnTW`WZX_kUGus{p[]WhhW[tvkls

www.panelook.com

Contents

Revision History -------------------------------------------------------------------------------------------- (3)

General Description --------------------------------------------------------------------------------------- (4)

General Information --------------------------------------------------------------------------------------- (4)

1. Absolute Maximum Ratings -------------------------------------------------------------------------- (5)

2. Application information for

DID (Digital Information Display) ------------------------------------- (6)

3. Optical Characteristics --------------------------------------------------------------------------------- (7)

4. Electrical Characteristics ----------------------------------------------------------------------------- (10)

4.1 TFT LCD Module

4.2 Back Light Unit

4.3 Inverter Input & Specification

5. Input Terminal Pin Assignment --------------------------------------------------------------------- (13)

5.1 LVDS Connector

5.2 Inverter Input Pin Configuration

5.3 Inverter Input Power Sequence

5.4 LVDS Interface

5.5 Input Signals, Basic Display Colors and Gray Scale of Each Color

6. Interface Timing ---------------------------------------------------------------------------------------- (19)

6.1 Timing Parameters (DE only mode)

6.2 Timing Diagrams of interface Signal (DE only mode)

6.3 Power ON/OFF Sequence

7. Outline Dimension -------------------------------------------------------------------------------------- (22)

8. Packing --------------------------------------------------------------------------------------------------- (24)

9. Marking & Others --------------------------------------------------------------------------------------- (25)

10. General Precaution ----------------------------------------------------------------------------------- (26)

10.1 Handling

10.2 Storage

10.3 Operation

10.4 Operation Condition Guide

10.5 Others

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Z VGY^wW\TWWXTnTW`WZX_kUGus{p[]WhhW[tvkls

* Revision History

www.panelook.com

Date

Nov

18,

2008

Mar

18,

2009

Rev.

001

SummaryPage

First issuedall000

Rising Time Max : 13ms ˧ 18ms7

Lamp Current Min : 3.5mA ˧ 4.0mA Lamp Current Typ : 5.5mA ˧ 6.5mA Lamp Voltage Min : 1600Vrms ˧ 1580Vrms Lamp Voltage Typ : 1650Vrms ˧ 1620Vrms Lamp Voltage Max : 1740Vrms ˧ 1720Vrms

Frequency Typ : 62.5kHz ˧ 63kHz Frequency Max : 65kHz ˧ 66kHz

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

[ VGY^wW\TWWXTnTW`WZX_kUGus{p[]WhhW[tvkls

General Description

Description

LTI460AA04 is a color active matrix liquid crystal display (LCD) that uses amorphous silicon TFT(Thin Film Transistor) as switching components. This model is composed of a TFT LCD panel, a driver circuit and a backlight unit. The resolution of a 46.0“ is 1366 x 768 and this model can display up to 16.7 million colors with wide viewing angle of 89¶ or higher in all directions. This panel is intended to support applications to provide a excellent performance for Flat Panel Display such as Home-alone Multimedia TFT-LCD TV, Display terminals for AV application products, and Digital Information Display (DID).

Features

 RoHS compliance (Pb-free)  High contrast ratio, High luminance  SPVA(Super Patterned Vertical Align) mode  Wide viewing angle (·178¶)  High speed response  Super narrow bezel, Black top chassis  Landscape / Portrait type compatible  WXGA (1366 x 768 pixels) resolution (16:9)  Low power consumption  Direct Type 24 CCFTs(Cold Cathode Fluorescent Tube)  DE(Data Enable) mode  LVDS (Low Voltage Differential Signaling) interface (1pixel/clock)

www.panelook.com

General Information

Module Size

1025.653(W

59.43(D

Haze 44% , Hard-coating (3H)Surface Treatment

RGB vertical stripePixel Arrangement

Normally BlackDisplay Mode

) x 579.844(H

TYP

MAX

700 (Typ.)Luminance of White

UnitSpecificationItems

)

TYP

)

g16,000(Max)Weight

mm0.7455(H) x 0.7455(V)Pixel Pitch

mm1018.353(H) x 572.544(V)Active Display Area

colors8 bit - 16.7MDisplay Colors

pixel1366 x 768Number of Pixels

cd/m

Note

·1.0mm

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

\ VGY^wW\TWWXTnTW`WZX_kUGus{p[]WhhW[tvkls

1. Absolute Maximum Ratings

If the condition exceeds maximum ratings, it can cause malfunction or unrecoverable

damage to the device.

www.panelook.com

NoteUnitMax.Min.SymbolItem

Power Supply Voltage

Storage temperature

Glass surface

Center

STG

CENTER

temperature

(Operation)

Note (1) Ta= 25 · 2 ¶C

(2) Temperature and relative humidity range are shown in the figure below.

a. 90 % RH Max. (Ta ˺ 39 ¶C) b. Relative Humidity is 90% or less. (Ta > 39 ¶C) c. No condensation

T. Uniformity

୞T

(1)V13.2GND-0.5V

60-20T

500T

୅

(2)

(2),(3)

10-

୅

Fig. Temperature and Relative humidity range

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

] VGY^wW\TWWXTnTW`WZX_kUGus{p[]WhhW[tvkls

(3) Definition of test point

www.panelook.com

5mm



LCD Module (Active)

୞T should be less than 10୅ (୞T = |T

CENTER

CORNER

: Temperature of the center of the glass surface (Test point 5)

: Temperature of each edge of the glass surface (Test point 1~4)

CENTER–TCORNER

| )

2. Application information for DID (Digital Information Display)

A long-term display like DID application may cause uneven display including image retention. To optimize module's lifetime and function, several operating usages are required.

1. Normal operating condition

- Temperature: 20 · 15୅

- Humidity: 65 · 20 %

- Display pattern: moving picture or regular switchover display

Note) Long-term static information image may cause uneven display.

2. Operating usages under abnormal operating condition. Note (1) a. Ambient condition

- Well-ventilated place is recommended to set up DID system.

b. Power off and screen saver

- Periodical power-off or screen saver is needed after long-term static display. Note (2)

3. Operating usages to protect uneven display due to long-term static information display a. Suitable operating time for E-DID : under 20 hours a day. b. Periodical display contents change from static image to moving picture.

- Liquid crystal refresh time is required.

c. Periodical background color and character (image) color change

- Use different colors for background and character (image), respectively.

- Change colors periodically.

d. Avoid combination of background and character with large different luminance.

Note (1) Abnormal condition means every operating condition except normal operating condition. Note (2) Moving picture or black pattern is strongly recommended for screen saver.

4. Lifetime in this spec is guaranteed only when DID is used under right operating usages.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

^ VGY^wW\TWWXTnTW`WZX_kUGus{p[]WhhW[tvkls

3. Optical Characteristics

The optical characteristics should be measured in a dark room or equivalent.

Measuring equipment :

TOPCON BM-7,SPECTRORADIOMETER SR-3

www.panelook.com

Contrast Ratio

(Center of screen)

Response

Time

Luminance of White

(Center of screen)

Color

Chromaticity

(CIE 1931)

Rising

Falling

Red

Green

Blue

White

(Ta = 25 · 2¶C, V

TgG-to-G

Normal

TL,R=0

TU,D=0

Viewing

Angle

= 12V, fv= 60Hz, f

0.643

0.328Ry

0.271Gx

TYP.

-0.03

0.599Gy

0.143Bx

0.060By

0.280Wx

0.290Wy

= 80MHz, IL= 6.0mArms)

DCLK

-30002500C/R

1810-Tr

106-Tf

msec

-8-

-700550Y

cd/m

TYP.

+0.03

%-72--Color Gamut

NoteUnitMax.Typ.Min.ConditionSymbolItem

(3)

SR-3

(5)

BM-7

(6)

SR-3

(7),(8)

SR-3

(7)

SR-3

Hor.

Viewing

Angle

Ver.

Brightness Uniformity

(9 Points)

uni

Note (1) Test Equipment Setup

The measurement should be executed in a stable, windless and dark room between 40min and 60min after lighting the backlight at the given temperature for stabilization of the backlight. This should be measured in the center of screen.

Single lamp current : 6.0mA Environment condition : Ta = 25 · 2 ¶C

C/R˻10

K-10000--Color Temperature

(7)

SR-3

-8975

-8975T Degree

-8975T

(8)

SR-3

-8975T

%25--B

(4)

SR-3

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

_ VGY^wW\TWWXTnTW`WZX_kUGus{p[]WhhW[tvkls

ྙྚྛ

ྞ

ྡ

ྠ

ྜྷ ྜ

ྟ

www.panelook.com

Field Photo detector

SR-3

BM-7

TFT - LCD Module

Note (2) Definition of test point

228 683 1138

Photo detector

Field

The center of the screen

SR-3 : 50 BM-7 : 50

LCD Panel

㎝

180

384

640

Note (3) Definition of Contrast Ratio (C/R)

: Ratio of gray max (Gmax) & gray min (Gmin) at the center point 㽶 of the panel

max

min

Gmax : Luminance with all pixels white Gmin : Luminance with all pixels black

Active Area

Test Point

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

` VGY^wW\TWWXTnTW`WZX_kUGus{p[]WhhW[tvkls

Note (4) Definition of 9 points brightness uniformity

www.panelook.com

Buni



Bmax : Maximum brightness Bmin : Minimum brightness

Note (5) Definition of Response time : Sum of Tr, Tf

Display data

Optical Instruments

Response

(max min)

100

100%

90%

10%



max

Black (data off)

White (data on)

White (data off)

TIME

Note (6) Definition of Luminance of White : Luminance of white at center point 㽶

Note (7) Definition of Color Chromaticity (CIE 1931)

Color coordinate of Red, Green, Blue & White at center point 㽶

Note (8) Definition of Viewing Angle

: Viewing angle range (C/R ˻ 10)

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

+ 18 hidden pages