Samsung LTA260AP08-W Datasheet

Approval
LTA260AP08-W
GA
LTA260AP08-W
Approval
Customer :Visual Display Division DATE : 02.Dec.2009
SAMSUNG TFT--
SAMSUNG TFT
SAMSUNG TFT-LCD
MODEL
MODEL
MODEL : LTF260AP04(BN07-00806A)
Any Modification of Specification is not allowed without SEC's Permission.
NOTE :
www.jxlcd.com
www.jxlcd.com
Customer’’
Customer
LCD
LCD
: LTF260AP04(BN07--
: LTF260AP04(BN07
APPROVAED BY
s Approval
s Approval
00806A)
00806A)
DATE
02.Dec.2009
SIGNATURE
Samsung Electronics Co . , LTD.
MODEL
MODEL LTF260AP04
MODELMODEL
LTF260AP04 Doc. No
LTF260AP04LTF260AP04
DATE
Eun Woo Jeong
LCD Business
Doc. No 06
Doc. NoDoc. No
06---- 000
0606
PREPARED BY
000---- SSSS---- 091202
000000
091202 Page
091202091202
DATE
02.Dec.2009
Page 1111 / 28
PagePage
/ 281111/ 29
/ 29
/ 28/ 28
/ 29/ 29
Contents
General Description ------------------------------------------------------------------------------------- (4)
1. Absolute Maximum Ratings ------------------------------------------------------------------------ (5)
2. Optical Characteristics ------------------------------------------------------------------------------- (6)
3. Electrical Characteristics ---------------------------------------------------------------------------- (9)
3.1 TFT LCD Module
3.2 Back Light Unit
4. Block Diagram ---------------------------------------------------------------------------------------------------- (12)
4.1 TFT LCD Module
4.2 Back Light Unit
4.4 Back Light Unit Pin Assignment
5. Input Terminal Pin Assignment ------------------------------------------------------------------- (14)
5.1 Input Signal & Power
5.2 LVDS Interface
5.3 Input Signals, Basic Display Colors and Gray Scale of Each Color
6. Interface Timing -------------------------------------------------------------------------------------- (17)
6.1 Timing Parameters (DE only mode)
6.2 Timing Diagrams of interface Signal (DE only mode)
6.3 Power ON/OFF Sequence
www.jxlcd.com
www.jxlcd.com
7. Outline Dimension ------------------------------------------------------------------------------------ (21)
8. Reliability Test ----------------------------------------------------------------------------------------------------- (22)
-
9. Packing ------------------------------------------------------------------------------------------------- (23)
10. Marking & Others ----------------------------------------------------------------------------------- (24)
11. General Precaution --------------------------------------------------------------------------------- (25)
11.1 Handling
11.2 Storage
11.3 Operation
11.4 Others
MODEL
MODEL LTF260AP04
MODELMODEL
LTF260AP04 Doc. No
LTF260AP04LTF260AP04
Doc. No 06
Doc. NoDoc. No
06---- 000
0606
000---- SSSS---- 091202
000000
091202 Page
091202091202
Page 2222 / 28
PagePage
/ 282222/ 29
/ 29
/ 28/ 28
/ 29/ 29
* Revision History
Date
02.Dec . 2009
Rev.
No
000 all First issued
Page Summary
www.jxlcd.com
www.jxlcd.com
MODEL
MODEL LTF260AP04
MODELMODEL
LTF260AP04 Doc. No
LTF260AP04LTF260AP04
Doc. No 06
Doc. NoDoc. No
06---- 000
0606
000---- SSSS---- 091202
000000
091202 Page
091202091202
Page 3333 / 28
PagePage
/ 283333/ 29
/ 29
/ 28/ 28
/ 29/ 29
General Description
LTA260AP08
Description
LTF260AP04 is a color active matrix liquid crystal display (LCD) that uses amorphous silicon TFT (Thin Film Transistor) as switching components. This model is composed of a TFT LCD panel, a driver circuit and a back light unit. The resolution of a 26” is 1366 x 768 and this model can display up to 16.7 millions colors.
Features
High contrast ratio, high aperture structurePVA (Wide Viewing AngleHigh speed responseHD (1366 x 768 pixels) resolutionLow power consumption
U type 4CCFLs
DE (Data Enable) only modeLVDS (Low Voltage Differential Signaling) interface (1pixel/clock)
RoHS compliance (Pb-free)
Applications
Patterned Vertical Align)
(Cold Cathode Fluorescent Lamp)
mode
Workstation & desktop monitorsDisplay terminals for AV application productsMonitors for industrial machine
* If the module is used to other applications besides the above, please contact SEC
in advance.
www.jxlcd.com
www.jxlcd.com
General Information
Items Specification Unit Note
Module Size
Weight
Pixel Pitch
Active Display Area
Surface Treatment
Display Colors 8 Bits, 16.7M colors
Number of Pixels 1,366 x 768 pixel
Pixel Arrangement RGB Horizontal stripe
626 (H
0.4215 (H) × 0.1405 (V)
575.769 (H) × 323.712 (V))
Haze 7%, Hard-Coating (3H)
typ
) × 373 (V
53 (D
4,200
max
(typ.)
typ
)
)
mm
mm
mm
± 1.0 mm
g
MODEL
MODEL LTF260AP04
MODELMODEL
Display Mode Normally Black
Luminance of White 400(Typ.) cd/
LTF260AP04 Doc. No
LTF260AP04LTF260AP04
Doc. No 06
Doc. NoDoc. No
06---- 000
0606
000---- SSSS---- 091202
000000
091202 Page
091202091202
Page 4444 / 28
PagePage
/ 284444/ 29
/ 29
/ 28/ 28
/ 29/ 29
1. Absolute Maximum Ratings
If the condition exceeds maximum ratings, it can cause malfunction or unrecoverable damage to the device.
Item Symbol Min. Max. Unit Note
(VSS = 0 V)
Power Supply Voltage V
Storage temperature T
Center of Glass Surface temperature (Operation)
Operation temperature T
Shock ( non - operating ) S
Vibration ( non - operating ) V
Note (1) Ta= 25 ± 2 °C
(2) Temperature and relative humidity range are shown in the figure below.
a. 90 % RH Max. (Ta 39 °C) b. Relative Humidity is 90% or less. (Ta > 39 °C) c. No condensation
(3) 11ms, sine wave, one time for ± X, ± Y, ± Z axis (4) 10-300 Hz, Sweep rate 10min, 30min for X,Y,Z axis
www.jxlcd.com
www.jxlcd.com
T
DD
STG
SUR
OPR
nop
nop
10.8
-20 65
0 65
0 50
- 50 G (3)
- 1.5 G (4)
13.2 V (1)
(2)
(2)
(2)
Fig. Temperature and Relative humidity range
MODEL
MODEL LTF260AP04
MODELMODEL
LTF260AP04 Doc. No
LTF260AP04LTF260AP04
Doc. No 06
Doc. NoDoc. No
06---- 000
0606
000---- SSSS---- 091202
000000
091202 Page
091202091202
Page 5555 / 28
PagePage
/ 285555/ 29
/ 29
/ 28/ 28
/ 29/ 29
2. Optical Characteristics
The optical characteristics should be measured in a dark room or equivalent. Measuring equipment :
TOPCON RD-80S, TOPCON SR-3,ELDIM EZ-CONTRAST
(Ta = 25 ± 2°C, VDD=12V, fv= 60Hz, f
Item Symbol Condition Min. Typ. Max. Unit Note
Contrast Ratio
(Center of screen)
Response
Time
Luminance of White
(Center of screen)
Color
Chromaticity
(CIE 1931)
Color Gamut - - 72.0 - %
G-to-G Tg
Red
Green
Blue
White
www.jxlcd.com
www.jxlcd.com
C/R - 5000 -
Y
L
Rx
Ry 0.340
Gx 0.300
Gy 0.600
Bx 0.150
By 0.060
Wx 0.280
Wy 0.290
DCLK
Normal
θL,R=0
θU,D=0
Viewing
Angle
=78 MHz, INVERTER = 57.5 (KHz ± 2.5Khz), DUTY 100%)
- 8 16 ms
350 400 - cd/m
0.640
TYP.
-0.03
TYP.
+0.03
(1)
SR-3
2
(4)
SR-3
(5),(6)
SR-3
(5)
SR-3
Color Temperature - - 10,000 - K
Hor.
Viewing
Angle
Ver.
Brightness Uniformity
(9 Points)
θ
L
θ
R
θ
U
θ
D
B
uni
C/R10
79 89 -
79 89 -
79 89 -
79 89 -
- - 25 %
- Test Equipment Setup
The measurement should be executed in a stable, windless and dark room 60min after lighting the back light at the given temperature for stabilization of the back light. This should be measured in the center of screen.
Environment condition : Ta = 25 ± 2 °C
MODEL
MODEL LTF260AP04
MODELMODEL
LTF260AP04 Doc. No
LTF260AP04LTF260AP04
Doc. No 06
Doc. NoDoc. No
06---- 000
000---- SSSS---- 091202
0606
000000
091202 Page
091202091202
Degree
EZ-Contrast
Page 6666 / 28
PagePage
(5)
SR-3
(6)
(2)
SR-3
/ 286666/ 29
/ 29
/ 28/ 28
/ 29/ 29
LMD Field
G
min
SR-3 1
°
LMD
BM-5A 2
BM-7 2°/ 1
PR-650 1
TFT - LCD Module
- Definition of test point
228 683 1138
128
www.jxlcd.com
www.jxlcd.com
384
⑨⑨⑨⑨
⑥⑥⑥⑥
°
°
°
Field
The center of the screen
⑧⑧⑧⑧
⑦⑦⑦⑦
⑤⑤⑤⑤ ④④④④
SR-3 : 50 RD-80S : 50
Active Area
Test Point
LCD Panel
640
Note (1) Definition of Contrast Ratio (C/R)
: Ratio of gray max (Gmax) & gray min (Gmin) at the center point of the panel
G
C R
/
Gmax : Luminance with all pixels white Gmin : Luminance with all pixels black
MODEL
MODEL LTF260AP04
MODELMODEL
LTF260AP04 Doc. No
LTF260AP04LTF260AP04
max
=
Doc. No 06
Doc. NoDoc. No
06---- 000
0606
①①①①②②②②③③③③
000---- SSSS---- 091202
000000
091202 Page
091202091202
Page 7777 / 28
PagePage
/ 287777/ 29
/ 29
/ 28/ 28
/ 29/ 29
Note (2) Definition of 9 points brightness uniformity ( Test Pattern : Full White )
B
max
B B
Buni
=
Bmax : Maximum brightness Bmin : Minimum brightness
Note (3) Definition of Response time : Sum of Tr, Tf
( max min)
100
Display data
Optical Instruments
Response
Note (4) Definition of Luminance of White : Luminance of white at center point
www.jxlcd.com
Note (5) Definition of Color Chromaticity (CIE 1931)
Note (6) Definition of Viewing Angle
www.jxlcd.com
Color coordinate of Red, Green, Blue & White at center point
: Viewing angle range (C/R 10)
100%
90%
10%
0%
Black (data off)
T
R
White (data on)
Black (data off)
T
F
TIME
MODEL
MODEL LTF260AP04
MODELMODEL
LTF260AP04 Doc. No
LTF260AP04LTF260AP04
Doc. No 06
Doc. NoDoc. No
06---- 000
0606
000---- SSSS---- 091202
000000
091202 Page
091202091202
Page 8888 / 28
PagePage
/ 288888/ 29
/ 29
/ 28/ 28
/ 29/ 29
3. Electrical Characteristics
3.1 TFT LCD Module
The connector for display data & timing signal should be connected.
Ta = 25°C
Item Symbol Min. Typ. Max. Unit Note
Voltage of Power Supply V
Current of Power Supply
Vsync Frequency f
Hsync Frequency f
Main Frequency f
Rush Current I
Note (1) The ripple voltage should be controlled under 10% of VDD.
(2) fV=60Hz, f (3) Power dissipation check pattern (LCD Module only)
a) Black Pattern b) White Pattern c) V-Stripe
(a) Black
(b) White 250 450 650 mA
(c) V-Stripe 500 700 900 mA
DCLK
= 78 MHz, VCC= 12V, DC Current.
www.jxlcd.com
www.jxlcd.com
DD
I
DD
V
H
DCLK
RUSH
10.8 12.0 13.2 V (1)
250 450 650 mA
48 60 66 Hz
44 48 53 kHz
72 78 85 MHz
- - 4.0 A (4)
(2),(3),
(5)
(4) Measurement Conditions
100%
90%
10% GND
Rush Current I
(5) The current of the inverter is not included.
MODEL
MODEL LTF260AP04
MODELMODEL
LTF260AP04 Doc. No
LTF260AP04LTF260AP04
RUSH
T
=470
RUSH
can be measured when T
Doc. No 06
Doc. NoDoc. No
06---- 000
0606
. is 470.
RUSH
000---- SSSS---- 091202
000000
091202 Page
091202091202
V
DD
Page 9999 / 28
PagePage
/ 289999/ 29
/ 29
/ 28/ 28
/ 29/ 29
Loading...
+ 20 hidden pages