SAMSUNG LSC460HN04-S Specification
CUSTOMER
CT Frank
MODEL NO.
LSC460HN04
DATE OF ISSUE
2013/4/5
EXTENSION CODE
S
LCD Sales & Marketing Team
Samsung Display Co., Ltd
Product Specification
( √ ) Preliminary Specification
( ) Approval Specification
The information described in this specification is preliminary and can be
changed without prior notice.
————————————————————————————————————————————————–
Table of Contents
REVISION HISTORY ............................................................................................................................................................ 3
1. GENERAL DESCRIPTION ............................................................................................................................................... 4
2. ABSOLUTE MAXIMUM RATINGS ............................................................................................................................. 5
3. OPTICAL CHARACTERISTICS ....................................................................................................................................... 6
4. ELECTRICAL CHARACTERISTICS ................................................................................................................................. 9
4.1 TFT LCD MODULE ..................................................................................................................................................... 9
5. INPUT TERMINAL PIN ASSIGNMENT ...................................................................................................................... 10
5.1 INPUT SIGNAL & POWER ....................................................................................................................................... 10
5.2 LVDS INTERFACE ..................................................................................................................................................... 11
5.3 INPUT COLOR DATA MAPPING............................................................................................................................. 14
6. INTERFACE TIMING ..................................................................................................................................................... 15
6.1 TIMING PARAMETERS OF TIMING (ONLY DE MODE) ................................ ................................ ............................ 15
6.2 TIMING DIAGRAMS OF INTERFACE SIGNAL ........................................................................................................ 15
6.3 CHARACTREISTICS OF INPUT DATA OF LVDS ..................................................................................................... 16
6.4 POWER ON/OFF SEQUENCE ................................................................................................................................. 17
7. OUTLINE DIMENSION ................................................................................................................................................. 18
8. PACKING ........................................................................................................................................................................ 19
8.1 CARTON..................................................................................................................................................................... 19
8.2 MARKING .................................................................................................................................................................. 20
9. GENERAL PRECAUTIONS ............................................................................................................................................ 22
9.1 HANDLING .............................................................................................................................................................. 22
9.2 STORAGE ................................................................................................................................................................. 24
9.3 OPERATION ............................................................................................................................................................. 24
9.4 OPERATION CONDITION GUIDE................................................................ ................................ ........................... 25
9.5 PROCESS EXECUTING GUIDE................................................................................................................................. 25
9.6 OTHERS .................................................................................................................................................................... 26
10. SPECIAL PRECAUSTIONS.......................................................................................................................................... 27
APPENDIX – RECOMMENDATION FOR THE BLU DESIGN ...................................................................................... 28
——————————————————————————————————————————————––—
Doc.No. LSC460HN04 Page 2 of 37 Rev.No. 06-000-G-20130405
————————————————————————————————————————————————–
Date.
Rev.No.
Page
Revision Description
2013/4/5
000 Initial Release
For eyes of CT Frank only
REVISION HISTORY
——————————————————————————————————————————————––—
Doc.No. LSC460HN04 Page 3 of 37 Rev.No. 06-000-G-20130405
————————————————————————————————————————————————–
Item
Specification
Unit
Note
Active Display Area
1018.08 (H) x 572.67 (V)
mm
Switching Components
a-Si TFT Active matrix
Glass size
TFT : 1036.08) x 591.40(V)
CF : 1030.88(H) x 588.70(V)
mm
±0.5mm
Panel Size
1036.08(H) x 591.40(V)
mm
±0.5mm
1.80(D)
mm
±0.1mm
Weight
2640 (Max)
g Display Colors
1.07B (Dithered 10bit)
Number of Pixels
1920 × 1080
Pixel Arrangement
RGB Vertical Stripe
Display Mode
Normally Black
Surface Treatment
Anti Glare
For eyes of CT Frank only
1. GENERAL DESCRIPTION
DESCRIPTION
This model uses a liquid crystal display (LCD) of amorphous silicon TFT as switching components. This model is
composed of a TFT LCD panel, a driver circuit, and an ass’y KIT of source PBA. This 46.0” model has a resolution
of a 1920 x 1080 and can display up to 1.07 Billion colors with the wide viewing angle of 89° or a higher degree
in all directions. This panel is designed to support applications by providing a excellent performance function of
the flat panel display such as home-alone multimedia TFT-LCD TV and a high definition TV.
FEATURES
RoHS compliance (Pb-free)
High contrast ratio & aperture ratio with the wide color gamut
SVA (Super vertical align) mode
Wide viewing angle (± 178°)
High speed response
FHD resolution (1920 x 1080, 16:9)
DE (Data enable) mode
The interface (2Pixel/clock) of 2ch LVDS (Low voltage differential signaling)
GENERAL INFORMATION
——————————————————————————————————————————————––—
Doc.No. LSC460HN04 Page 4 of 37 Rev.No. 06-000-G-20130405
————————————————————————————————————————————————–
Item
Symbol
Min.
Max.
Unit
Note
Power supply voltage
VDD
GND-0.5
13.2
V
(1)
Temperature for storage
(Temperature of glass surface)
T
STG
-20
60
C
(2), (4)
Humidity for storage
H
STG
5
90
%RH
(2), (4)
Operating temperature
T
OPR
0
50
C
(2), (5)
Operating humidity
H
STG
20
90
%RH
Endurance on static electricity
150 V (3)
Fig. Range for temperature and relative humidity (unpacking condition)
For eyes of CT Frank only
2. ABSOLUTE MAXIMUM RATINGS
If the figures on measuring instruments exceed maximum ratings, it can cause the malfunction or the
unrecoverable damage on the device.
Note (1) The power supply voltage at Ta= 25 ± 2 °C
(2) Temperature and the range of relative humidity are shown in the figure below.
a. 90 % RH Max. (Ta ≤ 39 °C)
b. The relative humidity is 90% or less. (Ta ＞39 °C)
c. No condensation
(3) Keep the static electricity under 150V in Polarizer attaching process.
(4) Operating condition with source PCB
(5) Storage temperature condition including glass
(6) Condition without packing. (Unpacking condition)
——————————————————————————————————————————————––—
Doc.No. LSC460HN04 Page 5 of 37 Rev.No. 06-000-G-20130405
————————————————————————————————————————————————–
Item
Symbol
Condition
Min.
Typ.
Max.
Unit
Note
Contrast Ratio
CR
3000
5000
-
-
(1)
SR-3
Response time
G-to-G
Tg - 8 16
msec
(2)
RD-80S
Luminance of white
(At the center of screen))
YL
360
400
-
cd/m2
(3)
SR-3
Color
Chromaticity
(CIE)
Red
RX
Normal
qL,R=0
qU,D=0
Viewing
Angle
TYP
-0.03
0.661
TYP
+0.03
(4),(5)
SR-3
RY
0.328
Green
GX
0.270
GY
0.585
Blue
BX
0.134
BY
0.125
White
WX
0.292
WY
0.361
Viewing
Angle
Hor.
qL
CR 10
At center
75
89
-
Degrees
(5)
SR-3
EZ-Contrast
qR
75
89
-
Ver.
qU
75
89
-
qD
75
89
-
Color Gamut
68 - %
Color
7000
K
For eyes of CT Frank only
3. OPTICAL CHARACTERISTICS
The optical characteristics should be measured in the dark room or the space surrounded by the similar setting.
Measuring equipment : TOPCON RD-80S, TOPCON SR-3 ,ELDIM EZ-Contrast
Ta = 25 ± 2°C, VDD=12.0V, fv=60Hz, fDCLK=148.5MHz, Light source: D65 Standard Light
Notice
(a) Setup for test equipment
The measurement should be executed in a stable, windless, and dark room for 40min and 60min after
operating the panel at the given temperature for stabilization of the standard light. (SDC uses the standard
luminance of the D65media).
This measurement should be measured at the center of screen.
The environment condition: Ta = 25 ± 2 °C
(b) D65media has the general light source.
The temperature of color is 6487K. The coordinate of color is Wx 0.313, Wy 0.329
The luminance of this product is 7217cd/㎡.
——————————————————————————————————————————————––—
Doc.No. LSC460HN04 Page 6 of 37 Rev.No. 06-000-G-20130405
————————————————————————————————————————————————–
Photo detector
Field
SR-3
2°
RD-80S
1°
C R
G
G
/
max
min
For eyes of CT Frank only
(c) The CIE positions D65 as the standard daylight illuminant:
[D65] is intended to represent average daylight and has a correlated color temperature of approximately 6500
K. CIE standard illuminant D65 should be used in all colorimetric calculations requiring representative daylight,
unless there are specific reasons for using a different illuminant.
- Definition of the test point
Note (1) Definition of contrast ratio (C/R)
: The ratio of gray max (Gmax) & gray min (Gmin) at the center point ⑤ of the panel
The measurement goes in ELABO-LS Standard light source
Gmax : The luminance with all white pixels
Gmin : The luminance with all black pixels
——————————————————————————————————————————————––—
Doc.No. LSC460HN04 Page 7 of 37 Rev.No. 06-000-G-20130405
————————————————————————————————————————————————–
Display data
The response of
optical instruments
For eyes of CT Frank only
Note (2) Definition of response time
※ G-to-G : Average response time between the whole gray scale to the whole gray scale.
The response time is the value that was measured after it was operated in Samsung's standard BLU for one
hour.( at room temperature)
Note (3) The definition of luminance of white: The luminance of white at the center point ⑤
The measurement shall be executed with the standard light source of D65
Note (4) The definition of chromaticity (CIE 1931)
The color coordinate of red, green, blue and white at the center point ⑤
The measurement shall be executed with the standard light source of D65
Note (5) Definition of viewing angle
: The range of viewing angle (C/R ≥10)
The measurement shall be executed with the standard light source of D65
——————————————————————————————————————————————––—
Doc.No. LSC460HN04 Page 8 of 37 Rev.No. 06-000-G-20130405
————————————————————————————————————————————————–
Item
Symbol
Min.
Typ.
Max.
Unit
Note
Voltage of power supply
VDD
10.8
12.0
13.2 V (1)
Currnet of
power
supply
(a) Black
IDD
-
450
550
mA
(2),(3)
(b) White
-
400
500
mA
(d) Sub V-stripe
700
800
mA
Vsync frequency
fV
48
60
62.5
Hz Hsync frequency
fH
60
67.5
70
kHz Main frequency
Fdclk
130
148.5
152.5
MHz Rush current
IRUSH
-
-
2
A
(4)
a) Black pattern b) White pattern (c) Sub V-stripe
For eyes of CT Frank only
4. ELECTRICAL CHARACTERISTICS
4.1 TFT LCD MODULE
* Ta = 25 ± 2 °C
Note (1) The ripple voltage should be controlled fewer than 10% of V
(2) fV=60Hz, fDCLK = 148.5MHz, VDD = 12.0V, DC Current.
(3) Power dissipation check pattern (LCD Module only)
(Typ.) voltage.
DD
(4) Conditions for measurement
——————————————————————————————————————————————––—
Doc.No. LSC460HN04 Page 9 of 37 Rev.No. 06-000-G-20130405
————————————————————————————————————————————————–
Pin
Symbol
Description
Pin
Symbol
Description
1
NC
NOTE1
26
NC
NOTE1
2
NC
NOTE1
27
NC
NOTE1
3
NC
NOTE1
28
Rx2[0]N
Even LVDS Signal -
4
NC
NOTE1
29
Rx2[0]P
Even LVDS Signal +
5
NC
NOTE1
30
Rx2[1]N
Even LVDS Signal -
6
NC
NOTE1
31
Rx2[1]P
Even LVDS Signal +
7
LVDS_SEL (Note 2)
LVDS selection
32
Rx2[2]N
Even LVDS Signal -
8
NC
NOTE1
33
Rx2[2]P
Even LVDS Signal +
9
NC
NOTE1
34
GND
Ground
10
NC
NOTE1
35
Rx2CLKN
LVDS Clock -
11
GND
Ground
36
Rx2CLKP
LVDS Clock +
12
Rx1[0]N
Odd LVDS Signal -
37
GND
Ground
13
Rx1[0]P
Odd LVDS Signal +
38
Rx2[3]N
Even LVDS Signal -
14
Rx1[1]N
Odd LVDS Signal -
39
Rx2[3]P
Even LVDS Signal +
15
Rx1[1]P
Odd LVDS Signal +
40
Rx2[4]N (Note 2)
Even LVDS Signal -
16
Rx1[2]N
Odd LVDS Signal -
41
Rx2[4]P (Note 2)
Even LVDS Signal +
17
Rx1[2]P
Odd LVDS Signal +
42
NC
NOTE1
18
GND
Ground
43
NC
NOTE1
19
Rx1CLKN
LVDS Clock -
44
GND
Ground
20
Rx1CLKP
LVDS Clock +
45
GND
Ground
21
GND
Ground
46
GND
Ground
22
Rx1[3]N
Odd LVDS Signal -
47
NC
NOTE1
23
Rx1[3]P
Odd LVDS Signal +
48
12V
DC power supply
24
Rx1[4]N (Note 3)
Odd LVDS Signal -
49
12V
DC power supply
25
Rx1[4]P (Note 3)
Odd LVDS Signal +
50
12V
DC power supply
51
12V
DC power supply
For eyes of CT Frank only
5. INPUT TERMINAL PIN ASSIGNMENT
5.1 INPUT SIGNAL & POWER
Connector : FI-RE51S-HF(JAE)
——————————————————————————————————————————————––—
Doc.No. LSC460HN04 Page 10 of 37 Rev.No. 06-000-G-20130405
————————————————————————————————————————————————–
NOTE(2) Parameter
Symbol
Value
Unit
Note
Min
Typ
Max
Interface
Input High Voltage
High
2.8 - 3.6
V
Input Low Voltage
Low 0 -
0.8
V
For eyes of CT Frank only
Note (1) No connection: These PINS are used only for the product of SAMSUNG.
(DO NOT CONNECT the input device to these pins.)
Note (2) LVDS selection : If this pin : Low(GND V) / NC JEIDA LVDS format
Otherwise : High(3.3V) Normal LVDS
Note (3) Input mode 8bit setting @ 8bit input E_Channel : Floating
Input mode 10bit setting @ 8bit input E_Channel : Keep Level’0’
Pin No.24 / Pin No.40 : Pull up(3.3V)
Pin No.25 / Pin No.41 : Pull down(GND)
——————————————————————————————————————————————––—
Doc.No. LSC460HN04 Page 11 of 37 Rev.No. 06-000-G-20130405
————————————————————————————————————————————————–
For eyes of CT Frank only
Note (4) Pin number which starts from the left side.
a. Power GND pins should be connected to the LCD’s metal chassis.
b. All power input pins should be connected together.
c. All NC pins should be separated from other signal or power.
——————————————————————————————————————————————––—
Doc.No. LSC460HN04 Page 12 of 37 Rev.No. 06-000-G-20130405
Loading...