Samsung LS27B350HSZ-ZA User Manual

Download

User manual

S27C390H

The color and the appearance may differ depending on

the product, and the specifications are subject to

change without prior notice to improve the performance.

BN46-00311C-00

BEFORE USING THE

PRODUCT

PREPARATIONS 19 Checking the Contents

7 Copyright

7 Icons used in this manual

8 Cleaning

9 Securing the Installation Space

9 Precautions for storage

10 Safety Precautions

10 Symbols for safety precautions 11 Electricity and Safety 12 Installation and Safety 14 Operation

18 Correct posture to use the product

19 Removing the Packaging 20 Checking the Components

CONNECTING AND USING

A SOURCE DEVICE

21 Parts

21 Frontal Button 23 Reverse Side

24 Installation

24 Attaching the Stand 25 Removing the Stand 26 Adjusting the Product Tilt 27 Anti-theft Lock

28 Before Connecting

28 Pre-connection Checkpoints

Table Of Contents

29 Connecting and Using a PC

29 Connection Using the D-SUB Cable (Analogue

Type) 30 Connection Using the HDMI Cable 30 Connection Using an HDMI-DVI Cable 31 Connecting the Power 32 Driver Installation 33 Setting Optimum Resolution 34 Changing the Resolution Using a PC

SCREEN SETUP 38 Brightness

38 Configuring Brightness

39 Contrast

39 Configuring Contrast

40 Sharpness

40 Configuring Sharpness

41 SAMSUNG MAGIC Bright

41 Configuring SAMSUNG MAGIC Bright

43 SAMSUNG MAGIC Angle

43 Configuring SAMSUNG MAGIC Angle

44 SAMSUNG MAGIC Upscale

44 Configuring SAMSUNG MAGIC Upscale

45 Image Size

45 Changing the Image Size

47 HDMI Black Level

47 Configuring the HDMI Black Level Settings

48 H-Position & V-Position

48 Configuring H-Position & V-Position

49 Coarse

49 Adjusting Coarse

50 Fine

50 Adjusting Fine

Table Of Contents

CONFIGURING TINT

51 Red

51 Configuring Red

52 Green

52 Configuring Green

53 Blue

53 Configuring Blue

54 Color Tone

54 Configuring the Color Tone Settings

55 Gamma

55 Configuring Gamma

COORDINATING OSD 56 Language

56 Configuring Language

57 Menu H-Position & Menu V-Position

57 Configuring Menu H-Position & Menu V-

Position

58 Display Time

58 Configuring Display Time

59 Transparency

59 Changing Transparency

SETUP AND RESET 60 Reset

60 Initializing Settings (Reset)

61 Eco Saving

61 Configuring Eco Saving

62 Off Timer

62 Configuring Off Timer

63 Turn Off After

63 Configuring Turn Off After

64 PC/AV Mode

64 Configuring PC/AV Mode

Table Of Contents

65 Key Repeat Time

65 Configuring Key Repeat Time

66 Source Detection

66 Configuring Source Detection

67 Customized Key

67 Configuring Customized Key

INFORMATION MENU AND

OTHERS

INSTALLING THE

SOFTWARE

TROUBLESHOOTING

GUIDE

68 INFORMATION

68 Displaying INFORMATION

69 Configuring Brightness and Contrast in

the Initial Screen

70 MagicTune

70 What is "MagicTune"? 70 Installing the Software 71 Removing the Software

72 MultiScreen

72 Installing the Software 73 Removing the Software

74 Requirements Before Contacting

Samsung Customer Service Center

74 Testing the Product 74 Checking the Resolution and Frequency 74 Check the following.

77 Q & A

SPECIFICATIONS 79 General

81 PowerSaver

82 Standard Signal Mode Table

APPENDIX 84 Contact SAMSUNG WORLD WIDE

Table Of Contents

90 Responsibility for the Pay Service (Cost

to Customers)

90 Not a product defect 90 A Product damage caused by customer's fault 90 Others

92 Correct Disposal

92 Correct Disposal of This Product (Waste

Electrical & Electronic Equipment)

93 Terminology

INDEX

Table Of Contents

Copyright

The contents of this manual are subject to change without notice to improve quality.

Samsung Electronics owns the copyright for this manual.

Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is

prohibited.

Microsoft and Windows are registered trademarks of Microsoft Corporation.

VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.

Before Using the Product

2013 Samsung Electronics

Icons used in this manual

The following images are for reference only. Real-life situations may differ from what is shown in the images.

Before Using the Product

Cleaning

Before Using the Product

Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.

Take the following steps when cleaning.

1. Power off the monitor and computer.

2. Disconnect the power cord from the monitor.

Hold the power cable by the plug and do not touch the cable with wet

hands. Otherwise, an electric shock may result.

3. Wipe the monitor with a clean, soft and dry cloth.

 Do not apply a cleaning agent that contains alcohol,

solvent, or surfactant to the monitor.

 Do not spray water or detergent directly on the product.

4. Wet a soft and dry cloth in water and wring thoroughly to clean the exterior of the monitor.

5. Connect the power cord to the product after cleaning the product.

6. Power on the monitor and computer.

Before Using the Product

10 cm10 cm

10 cm

Securing the Installation Space

Ensure some space around the product for ventilation. An internal temperature rise may cause fire and

damage the product. Be sure to allow the amount of space as shown below or greater when installing

the product.

The exterior may differ depending on the product.

Precautions for storage

Be sure to contact Samsung Customer Service Center (page 84) if the inside of the monitor needs

cleaning. (Service fee will be charged.)

Before Using the Product

Safety Precautions

Caution: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR

BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO

This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.

This symbol alerts you that important literature concerning operation and maintenance has been included with this product.

Caution

RISK OF ELECTRIC SHOCK DO NOT OPEN

QUALIFIED PERSONNEL.

Symbols for safety precautions

Warning

Caution

A serious or fatal injury may result if instructions are not followed.

Personal injury or damage to properties may result if instructions are not followed.

Activities marked by this symbol are prohibited.

Instructions marked by this symbol must be followed.

Before Using the Product

Electricity and Safety

The following images are for reference only. Real-life situations may differ from what is shown in the

images.

Warning

Do not use a damaged power cord or plug, or a loose power socket.

 An electric shock or fire may result.

Do not plug many products into the same power socket.

 Otherwise, the socket may overheat and cause a fire.

Do not touch the power plug with wet hands.

 Otherwise, an electric shock may result.

Insert the power plug all the way in so it is not loose.

 An unstable connection may cause a fire.

Connect the power plug to a grounded power socket (type 1 insulated devices only).

 An electric shock or injury may result.

Do not bend or pull the power cord with force. Do not weigh the power cord down with a heavy object.

 A damaged power cord may cause an electric shock or fire.

Do not place the power cord or product near heat sources.

 An electric shock or fire may result.

Remove foreign substances such as dust around the plug pins and power socket with a dry cloth.

 Otherwise, a fire may result.

Before Using the Product

Caution

Do not unplug the power cord when the product is in use.

 The product may become damaged by an electric shock.

Do not use the power cord for products other than authorized products supplied by Samsung.

 An electric shock or fire may result.

Keep the power socket where the power cord is connected unobstructed.

 If any problem occurs in the product, unplug the power cable to completely

cut the power to the product.

Power to the product cannot be completely cut off with the power button.

Hold the plug when disconnecting the power cord from the power socket.

 An electric shock or fire may result.

Installation and Safety

Warning

DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES.

 Otherwise, a fire may result.

Avoid installing the product in a narrow space with bad ventilation, such as a bookshelf or wall closet.

 Otherwise, a fire may result due to an increased internal temperature.

Keep the plastic packaging bag for the product in a place that cannot be reached by children.

 Children may suffocate.

Before Using the Product

Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.).

 The product may fall and break or cause a personal injury.

 Using the product in an area with excess vibration may damage the product

or cause a fire.

Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or smoke.

 An electric shock or fire may result.

Do not expose the product to direct sunlight, heat, or a hot object such as a stove.

 Otherwise, the product lifespan may be reduced, or a fire may result.

Caution

Do not install the product within the reach of young children.

 The product may fall and injure children.

Edible oil, such as soybean oil, can damage or deform the product. Do not install

the product in a kitchen or near a kitchen counter.

Take care not to drop the product when moving it.

 Otherwise, product failure or personal injury may result.

Do not set down the product on its front.

 The screen may become damaged.

When installing the product on a cabinet or shelf, make sure that the bottom edge of the front of the product is not protruding.

 The product may fall and break or cause a personal injury.

 Install the product only on cabinets or shelves of the right size.

Before Using the Product

SAMSUNG

Put down the product carefully.

 The product may fall and break or cause a personal injury.

Installing the product in an unusual place (a place exposed to a lot of fine particles, chemical substances or extreme temperatures, or an airport or train station where the product should operate continuously for an extended period of time) may seriously affect its performance.

 Be sure to consult Samsung Customer Service Center (page 84) before

installation if you want to install the product at such a place.

Operation

Warning

High voltage runs through the product. Do not attempt to disassemble, repair, or modify the product on your own.

 An electric shock or fire may result.

 Contact Samsung Customer Service Center (page 84) for repair.

Before moving the product, turn off the power switch and disconnect the power cable and all other connected cables.

 Otherwise, the power cord may be damaged and a fire or electric shock may

result.

If the product generates a strange noise, a burning smell, or smoke, remove the power cord immediately and contact Samsung Customer Service Center (page

84).

 An electric shock or fire may result.

Do not let children hang from the product or climb on top of it.

 The product may fall, and your child may become injured or seriously

harmed.

If the product falls or the exterior is damaged, power off the product, remove the power cord, and contact Samsung Customer Service Center (page 84).

 Otherwise, an electric shock or fire may result.

Do not put a heavy object, toy, or sweets on top of the product.

 The product or heavy objects may fall as children try to reach for the toy or

sweets resulting in a serious injury.

Before Using the Product

GAS

100

During a lightning or thunderstorm, power off the product and remove the power cable.

 An electric shock or fire may result.

Do not drop objects on the product or apply impact.

 An electric shock or fire may result.

Do not move the product by pulling the power cord or any cable.

 Otherwise, the power cable may be damaged and product failure, an electric

shock or fire may result.

If a gas leakage is found, do not touch the product or power plug. Also, ventilate the area immediately.

 Sparks can cause an explosion or fire.

Do not lift or move the product by the power cord or any cable.

 Otherwise, the power cable may be damaged and product failure, an electric

shock or fire may result.

Do not use or keep combustible spray or an inflammable substance near the product.

 An explosion or fire may result.

Ensure the vents are not blocked by tablecloths or curtains.

 Otherwise, a fire may result from an increased internal temperature.

Do not insert a metallic object (a chopstick, coin, hair pin, etc.) or inflammable object (paper, match, etc.) into the vent or ports of the product.

 If water or any foreign substance enters the product, be sure to power off the

product, remove the power cord, and contact Samsung Customer Service

Center (page 84).

 Product failure, an electric shock or fire may result.

Do not place objects containing liquid (vases, pots, bottles, etc) or metallic objects on top of the product.

 If water or any foreign substance enters the product, be sure to power off the

product, remove the power cord, and contact Samsung Customer Service

Center (page 84).

 Product failure, an electric shock or fire may result.

Before Using the Product

-_-

Caution

Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels.

 If you are not going to use the product for an extended period of time,

activate power-saving mode or a moving-picture screen saver.

Disconnect the power cord from the power socket if you do not plan on using the product for an extended period of time (vacation, etc).

 Otherwise, a fire may result from accumulated dust, overheating, an electric

shock, or electric leakage.

Use the product at the recommended resolution and frequency.

 Your eyesight may deteriorate.

Do not put DC power adapters together.

 Otherwise, a fire may result.

Remove the plastic bag from the DC power adapter before you use it.

 Otherwise, a fire may result.

Do not let water enter the DC power device or get the device wet.

 An electric shock or fire may result.

 Avoid using the product outdoors where it can be exposed to rain or snow.

 Be careful not to get the DC power adapter wet when you wash the floor.

Do not put the DC power adapter near to any heating apparatus.

 Otherwise, a fire may result.

Keep the DC power adapter in a well-ventilated area.

Looking at the screen too close for an extended period of time can deteriorate your eyesight.

Before Using the Product

Do not hold the monitor upside-down or move it by holding the stand.

 The product may fall and break or cause a personal injury.

Do not use humidifiers or stoves around the product.

 An electric shock or fire may result.

Rest your eyes for more than 5 minutes for every 1 hour of product use.

 Eye fatigue will be relieved.

Do not touch the screen when the product has been turned on for an extended period of time as it will become hot.

Store the small accessories used with the product out of reach of children.

Exercise caution when adjusting the product angle or stand height.

 Otherwise, children's fingers or hands may become stuck and injured.

 Tilting the product excessively may cause it to fall and result in personal

injury.

Do not place heavy objects on the product.

 Product failure or personal injure may result.

Before Using the Product

50 cm

Correct posture to use the product

Use the product in the correct posture as follows:

 Straighten your back.

 Allow a distance of 45 to 50 cm between your eye and the screen, and look slightly

downward at the screen.

Keep your eyes directly in front of the screen.

 Adjust the angle so light does not reflect on the screen.

 Keep your forearms perpendicular to your upper arms and level with the back of

your hands.

 Keep your elbows at about a right angle.

 Adjust the height of the product so you can keep your knees bent at 90 degrees or

more, your heels attached to the floor, and your arms lower than your heart.

Before Using the Product

Preparations

1.1 Checking the Contents

1.1.1 Removing the Packaging

1 Open the packaging box. Be careful not to damage the product when you open the packaging with

a sharp instrument.

2 Remove the styrofoam from the product.

3 Check the components and remove the styrofoam and plastic bag.

4 Store the box in a dry area so that it can be used when moving the product in the future.

This image is for reference only.

1 Preparations

Preparations

1.1.2 Checking the Components

 Contact the dealer from whom you purchased the product if any item is missing.

 The appearance of the components and items sold separately may differ from the image shown.

Components

Quick setup guide Warranty card

(Not available in some locations)

Power cable DC power adapter D-SUB cable (optional)

HDMI cable (optional) HDMI-DVI cable (optional) Stand base

Stand neck

User manual

(Other areas)

Components may vary depending on the country.

(North America only)

1 Preparations

Preparations

MENU AUTO

Function Key Guide

SAMSUNG

MAGIC ANGLE

AUTO

SAMSUNG

MAGIC

ANGLE

AUTO

SAMSUNG

MAGIC

SAMSUNG

MAGIC

SAMSUNG

MAGIC

1.2 Parts

1.2.1 Frontal Button

The color and shape of parts may differ from what is shown.

Specifications are subject to change without notice to improve quality.

Icons Description

Open or close the onscreen display (OSD) menu, or return to the parent menu.

 OSD control lock: Maintain the current settings, or lock the OSD

control to prevent unintended changes to settings.

 Enable: To lock the OSD control, press and hold the [ ] button

for 10 seconds.

 Disable: To unlock the OSD control, press and hold the [ ]

button for more than 10 seconds.

If the OSD control is locked,

 Brightness, Contrast and Angle can be adjusted, and

INFORMATION can be viewed.

 The Customized Key function can be used by pressing

the [ ] button. (The Customized Key is available even when the OSD control is locked.)

Configure Customized Key and press [ ]. The following options will

be enabled.

Angle - Bright - Eco Saving - Image Size

To configure Customized Key, go to SETUP & RESET

Customized Key and select the mode you want.

→

1 Preparations

AUTO

Preparations

Icons Description

Move to the upper or lower menu or adjust the value for an option on the OSD menu.

Use this button to control the brightness and contrast of the screen.

Confirm a menu selection.

Pressing the [ ] button when the OSD menu is not displayed will change the input source (Analog/HDMI). If you power on the product or

change the input source by pressing the [ ] button, a message that shows the changed input source will appear at the top left corner of the screen.

Press the [ ] button to automatically adjust the screen settings.

 Changing the resolution in Display Properties will activate the

Auto Adjustment function.

Function Key Guide

 Available only in Analog mode.

Turn the screen on or off.

When a control button on the product is pressed, the Function Key Guide will be displayed before the onscreen menu opens. (The guide shows the function of the button pressed.)

To access the onscreen menu when the guide is displayed, press the corresponding button again.

The Function Key Guide may vary depending on the function or product model.

Refer to the actual product.

1 Preparations

HDMI IN

RGB IN

Preparations

1.2.2 Reverse Side

 The color and shape of parts may differ from what is shown.

Specifications are subject to change without notice to improve quality.

 Provided ports may vary depending on the product.

Port Description

DC 14V

Connects to the DC power adapter.

Connects to a source device via a HDMI cable.

Connect to a PC using the D-SUB cable.

1 Preparations

Preparations

1.3 Installation

1.3.1 Attaching the Stand

Before assembling the product, place the product down on a flat and stable surface so that the screen

is facing downwards.

Insert the stand neck into the stand base in the direction shown in the figure.

Place a soft cloth over the table to protect the product and place the product onto the cloth so that the front of the product is facing downwards.

Check that the stand neck is firmly connected.

Hold the main body of the product with your hand as shown by the figure.

Push the assembled stand into the main body in the direction of the arrow as shown in the figure.

Tightly fasten the connecting screw at the bottom of the stand base.

- Caution

Do not hold the product upside down only by the stand.

1 Preparations

Preparations

1.3.2 Removing the Stand

Place a soft cloth over the table to protect the product and place the product onto the cloth so that the front of the product faces downwards.

While holding the stand neck with one hand, pound the other fisted hand down onto the top of the stand base in the direction of the arrow to detach the stand base.

Turn the connecting screw at the bottom of the stand base to separate it.

Remove the stand neck from the stand base by pulling it in the direction of the arrow as shown in the figure.

1 Preparations

-1° (±2°) ~ 20° (±2°)

Preparations

1.3.3 Adjusting the Product Tilt

The color and shape of parts may differ from what is shown. Specifications are subject to change

without notice to improve quality.

 You can adjust the tilt of your monitor.

 Hold the lower part of the product and adjust the tilt carefully.

1 Preparations

Preparations

1.3.4 Anti-theft Lock

An anti-theft lock allows you to use the product securely even in public places. The locking device shape

and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft

locking device for details. The lock device is sold separately.

The color and shape of parts may differ from what is shown. Specifications are subject to change

without notice to improve quality.

To lock an anti-theft locking device:

1 Fix the cable of your anti-theft locking device to a heavy object such as a desk.

2 Put one end of the cable through the loop on the other end.

3 Insert the Kensington Lock into the security slot on the back of the display.

4 Lock the locking device.

 An anti-theft locking device can be purchased separately.

 Refer to the user guide provided with your anti-theft locking device for details.

 Anti-theft locking devices can be purchased at electronics retailers or online.

1 Preparations

Connecting and Using a Source Device

2.1 Before Connecting

2.1.1 Pre-connection Checkpoints

 Before connecting a source device, read the user manual provided with it.

The number and locations of ports on source devices may differ from device to device.

 Do not connect the power cable until all connections are completed.

Connecting the power cable during connection may damage the product.

 Check the types of ports at the back of the product you want to connect.

2 Connecting and Using a Source Device

Connecting and Using a Source Device

RGB IN

2.2 Connecting and Using a PC

Select a connection method suitable for your PC.

Connecting parts may differ in different products.

2.2.1 Connection Using the D-SUB Cable (Analogue Type)

Do not connect the power cable before connecting all other cables.

Ensure you connect a source device first before connecting the power cable.

Connect the D-SUB cable to the [RGB IN] port on the back of the product and the RGB port on the PC.

2 Connect the DC power adapter to the product and a power socket.

Next, turn on the power switch on the PC. (For details, refer to "2.2.4 Connecting the Power".)

3 Press [ ] to change the input source to Analog.

Provided ports may vary depending on the product.

2 Connecting and Using a Source Device

HDMI IN

Connecting and Using a Source Device

2.2.2 Connection Using the HDMI Cable

Do not connect the power cable before connecting all other cables.

Ensure you connect a source device first before connecting the power cable.

Connect the HDMI cable to the [HDMI IN] port on the back of the product and the HDMI port on the PC.

2 Connect the DC power adapter to the product and a power socket.

Next, turn on the power switch on the PC. (For details, refer to "2.2.4 Connecting the Power".)

3 Press [ ] to change the input source to HDMI.

Provided ports may vary depending on the product.

2.2.3 Connection Using an HDMI-DVI Cable

Do not connect the power cable before connecting all other cables.

Ensure you connect a source device first before connecting the power cable.

Connect the HDMI-DVI cable to the [HDMI IN] port on the back of the product and the DVI port on the PC.

2 Connect the DC power adapter to the product and a power socket.

Next, turn on the power switch on the PC. (For details, refer to "2.2.4 Connecting the Power".)

3 Press [ ] to change the input source to HDMI.

Provided ports may vary depending on the product.

2 Connecting and Using a Source Device

DC 14V

Connecting and Using a Source Device

2.2.4 Connecting the Power

Connect the power adapter to [DC 14V] jack on the rear of the product.

Connect the power cable to the DC power adapter. Next, connect the DC power adapter to the product.

Plug in the power cable to the power socket.

The input voltage is switched automatically.

2 Connecting and Using a Source Device

Connecting and Using a Source Device

2.2.5 Driver Installation

 You can set the optimum resolution and frequency for this product by installing the corresponding

drivers.

 An installation driver is contained on the CD supplied with the product.

 If the file provided is faulty, visit the Samsung homepage (http://www.samsung.com/) and

download the file.

1 Insert the user manual CD provided with the product into the CD-ROM drive.

2 Click "Windows Driver".

3 Follow the instructions given on the screen to proceed with installation.

4 Select your product model from the list of models.

5 Go to Display Properties and check that the resolution and refresh rate are appropriate.

Refer to your Windows OS manual for further details.

2 Connecting and Using a Source Device

EXIT

AUTO

The optimal resolution for this monitor is as follows:

**** x **** **Hz

Use the above settings to set the resolution on your PC.

English

Connecting and Using a Source Device

2.2.6 Setting Optimum Resolution

An information message about setting optimum resolution will appear if you power on the product for the

first time after purchase.

Select a language on the product and change the resolution on your PC to the optimum setting.

1 Press [ ] to move to the language you want and press [ ].

2 To hide the information message, press [ ].

 If the optimum resolution is not selected, the message will appear up to three times for a specified

time even when the product is turned off and on again.

 The optimum resolution can also be selected in Control Panel on your PC.

ENU

2 Connecting and Using a Source Device

**** ****

**********

Connecting and Using a Source Device

2.2.7 Changing the Resolution Using a PC

 Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture

quality.

 The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected.

Changing the Resolution on Windows XP

Go to Control Panel Display Settings and change the resolution.

2 Connecting and Using a Source Device

*********** ***********

Connecting and Using a Source Device

Changing the Resolution on Windows Vista

Go to Control Panel Personalization Display Settings and change the resolution.

2 Connecting and Using a Source Device

Connecting and Using a Source Device

Changing the Resolution on Windows 7

Go to Control Panel Display Screen Resolution and change the resolution.

2 Connecting and Using a Source Device

Connecting and Using a Source Device

Changing the Resolution on Windows 8

Go to Settings Control Panel Display Screen Resolution and change the resolution.

2 Connecting and Using a Source Device

Screen Setup

SAMSUNG

MAGIC

Off

Wide

PICTURE

Brightness

Contrast

Sharpness

Image Size

SAMSUNG

MAGIC

Angle

Custom

SAMSUNG

MAGIC

Bright

SAMSUNG

MAGIC

Upscale

Adjust EnterReturn

AUTO

Configure the screen settings such as brightness.

3.1 Brightness

You can adjust the general brightness of the picture. (Range: 0~100)

A higher value will make the picture appear brighter.

 This menu is not available when Bright is set to Dynamic Contrast mode.

 This menu is not available when Eco Saving is enabled.

3.1.1 Configuring Brightness

1 Press any button on the front of the product to display the Function Key Guide.

Next, press [ ] to display the corresponding menu screen.

2 Press [ ] to move to PICTURE and press [ ] on the product.

3 Press [ ] to move to Brightness and press [ ] on the product.

The following screen will appear.

4 Adjust the Brightness using the [ ] buttons.

5 The selected option will be applied.

3 Screen Setup

Screen Setup

SAMSUNG

MAGIC

Custom

Off

Wide

PICTURE

Brightness

Contrast

Sharpness

Image Size

SAMSUNG

MAGIC

Bright

SAMSUNG

MAGIC

Upscale

Adjust EnterReturn

Off

SAMSUNG

MAGIC

Angle

Adjust EnterReturn

AUTO

Adjust EnterReturn

AUTO

3.2 Contrast

Adjust the contrast between the objects and background. (Range: 0~100)

A higher value will increase the contrast to make the object appear clearer.

This option is not available when Bright is in Cinema or Dynamic Contrast mode.

3.2.1 Configuring Contrast

1 Press any button on the front of the product to display the Function Key Guide.

Next, press [ ] to display the corresponding menu screen.

2 Press [ ] to move to PICTURE and press [ ] on the product.

3 Press [ ] to move to Contrast and press [ ] on the product.

The following screen will appear.

4 Adjust the Contrast using the [ ] buttons.

5 The selected option will be applied.

3 Screen Setup

Screen Setup

SAMSUNG

MAGIC

SAMSUNG

MAGIC

Custom

Off

Wide

PICTURE

Brightness

Contrast

Sharpness

Image Size

SAMSUNG

MAGIC

Bright

SAMSUNG

MAGIC

Upscale

Adjust EnterReturn

Off

SAMSUNG

MAGIC

Angle

Adjust EnterReturn

AUTO

Adjust EnterReturn

AUTO

3.3 Sharpness

Make the outline of objects more clear or blurry. (Range: 0~100)

A higher value will make the outline of objects clearer.

 This option is not available when Bright is in Cinema or Dynamic Contrast mode.

 This menu is not available when Upscale is in Mode1 or Mode2.

3.3.1 Configuring Sharpness

1 Press any button on the front of the product to display the Function Key Guide.

Next, press [ ] to display the corresponding menu screen.

2 Press [ ] to move to PICTURE and press [ ] on the product.

3 Press [ ] to move to Sharpness and press [ ] on the product.

The following screen will appear.

4 Adjust the Sharpness using the [ ] buttons.

5 The selected option will be applied.

3 Screen Setup

Screen Setup

SAMSUNG

MAGIC

SAMSUNG

MAGIC

Custom

Off

Auto

PICTURE

Brightness

Contrast

Sharpness

SAMSUNG

MAGIC

Bright

SAMSUNG

MAGIC

Angle

Custom Standard Game

Wide

Image Size

SAMSUNG

MAGIC

Upscale

Cinema Dynamic Contrast

Move EnterReturn

Adjust EnterReturn

AUTO

3.4 SAMSUNG MAGIC Bright

This menu provides an optimum picture quality suitable for the environment where the product will be

used.

 This menu is not available when Eco Saving is enabled.

 This menu is not available when Angle is enabled.

You can customize the brightness to suit your preferences.

3.4.1 Configuring SAMSUNG MAGIC Bright

1 Press any button on the front of the product to display the Function Key Guide.

Next, press [ ] to display the corresponding menu screen.

2 Press [ ] to move to PICTURE and press [ ] on the product.

3 Press [ ] to move to Bright and press [ ] on the product.

The following screen will appear.

 Custom: Customize the contrast and brightness as required.

 Standard: Obtain a picture quality suitable for editing documents or using Internet.

 Game: Obtain a picture quality suitable for playing games that involve many graphic effects and

dynamic movements.

 Cinema: Obtain the brightness and sharpness of TVs suitable for enjoying video and DVD

content.

 Dynamic Contrast: Obtain balanced brightness through automatic contrast adjustment.

3 Screen Setup

Custom

PICTURE

Brightness

Contrast

Sharpness

Image Size

SAMSUNG

MAGIC

Bright

MAGIC

Dynamic Standard

Movie

Custom

Move EnterReturn

SAMSUNG

MAGIC

Angle

Wide

SAMSUNG

MAGIC

Upscale

Adjust EnterReturn

AUTO

SAMSUNG

MAGIC

Screen Setup

When the external input is connected through HDMI and PC/AV Mode is set to AV, Bright

has four automatic picture settings (Dynamic, Standard, Movie and Custom) that are preset at the

factory. You can activate either Dynamic, Standard, Movie or Custom. You can select Custom

which automatically recalls your personalized picture settings.

 Dynamic: Select this mode to view a sharper image than in Standard mode.

 Standard: Select this mode when the surroundings are bright. This also provides a sharp

image.

 Movie: Select this mode when the surroundings are dark. This will save power and reduce eye

fatigue.

 Custom: Select this mode when you want to adjust the image according to your preferences.

4 Press [ ] to move to the option you want and press [ ].

5 The selected option will be applied.

3 Screen Setup

Screen Setup

SAMSUNG

MAGIC

SAMSUNG

MAGIC

SAMSUNG

MAGIC

Custom

PICTURE

Brightness

Contrast

Sharpness

Image Size

SAMSUNG

MAGIC

Bright

MAGIC

Off Lean Back Mode 1

Lean Back Mode 2

Standing Mode Side Mode Group View Custom

Move EnterReturn

SAMSUNG

MAGIC

Angle

SAMSUNG

MAGIC

Upscale

Adjust EnterReturn

AUTO

5 5

①

②

④

⑤

3.5 SAMSUNG MAGIC Angle

Angle allows you to configure the settings to obtain the optimum picture quality according to your

viewing angle.

This option is not available when Bright is in Cinema or Dynamic Contrast mode.

This feature provides the viewing angle, brightness, and tint to suit your preferences.

3.5.1 Configuring SAMSUNG MAGIC Angle

1 Press any button on the front of the product to display the Function Key Guide.

Next, press [ ] to display the corresponding menu screen.

2 Press [ ] to move to PICTURE and press [ ] on the product.

3 Press [ ] to move to Angle and press [ ] on the product.

The following screen will appear.

 Off : Select this option to view directly in front of the product.

 Lean Back Mode 1 : Select this option to view from a place slightly lower than the product.

 Lean Back Mode 2 : Select this option to view from a place lower than Lean Back Mode 1.

 Standing Mode : Select this option to view from a place higher than the product.

 Side Mode : Select this option to view from either side of the product.

 Group View: Select this option for more than one viewer to view from places , and .

 Custom: Lean Back Mode 1 will be applied by default if Custom is selected.

4 Press [ ] to move to the option you want and press [ ].

5 The selected option will be applied.

③

①

④

3 Screen Setup

⑤

Screen Setup

SAMSUNG

MAGIC

SAMSUNG

MAGIC

SAMSUNG

MAGIC

Custom

Off Auto

PICTURE

Brightness

Contrast

Sharpness

Image Size

SAMSUNG

MAGIC

Bright

SAMSUNG

MAGIC

Upscale

Off Mode1 Mode2

Move EnterReturn

Off

SAMSUNG

MAGIC

Angle

Adjust EnterReturn

AUTO

3.6 SAMSUNG MAGIC Upscale

Upscale function can enhance the layers of the picture details and the vividness of the picture.

 The function has more obvious effects on low-resolution pictures.

 This menu is not available when Bright is in Cinema or Dynamic Contrast mode.

3.6.1 Configuring SAMSUNG MAGIC Upscale

1 Press any button on the front of the product to display the Function Key Guide.

Next, press [ ] to display the corresponding menu screen.

2 Press [ ] to move to PICTURE and press [ ] on the product.

3 Press [ ] to move to Upscale and press [ ] on the product.

The following screen will appear.

Comparing with Mode1, Mode2 has a stronger effect.

4 Press [ ] to move to the option you want and press [ ].

5 The selected option will be applied.

3 Screen Setup

Screen Setup

Custom

Off

PICTURE

Brightness

Contrast

Sharpness

Image Size

SAMSUNG

MAGIC

Bright

SAMSUNG

MAGIC

Upscale

Auto Wide

Move EnterReturn

Off

SAMSUNG

MAGIC

Angle

Adjust EnterReturn

AUTO

Custom

Off

PICTURE

Brightness

Contrast

Sharpness

Image Size

SAMSUNG

MAGIC

Bright

SAMSUNG

MAGIC

Upscale

Auto

Move EnterReturn

Off

SAMSUNG

MAGIC

Angle

Adjust EnterReturn

AUTO

4:3 16:9 Screen Fit

3.7 Image Size

Change the picture size.

3.7.1 Changing the Image Size

1 Press any button on the front of the product to display the Function Key Guide.

Next, press [ ] to display the corresponding menu screen.

2 Press [ ] to move to PICTURE and press [ ] on the product.

3 Press [ ] to move to Image Size and press [ ] on the product.

The following screen will appear.

In PC mode

 Auto: Display the picture according to the aspect ratio of the input source.

 Wide: Display the picture in full screen regardless of the aspect ratio of the input source.

In AV mode

 4:3: Display the picture with an aspect ratio of 4:3. Suitable for videos and standard broadcasts.

 16:9: Display the picture with an aspect ratio of 16:9.

 Screen Fit: Display the picture with the original aspect ratio without cutting off.

 Changing the screen size is available when the following conditions are satisfied.

 The function may not be supported depending on the ports provided with the product.

 A digital output device is connected using the HDMI cable.

3 Screen Setup

Screen Setup

 The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally

(Not every model can support all of these signals.).

 This can only be set when the external input is connected through HDMI and

PC/AV Mode is set to AV.

4 Press [ ] to move to the option you want and press [ ].

5 The selected option will be applied.

3 Screen Setup

Screen Setup

PICTURE

H-Position

V-Position

Coarse

Fine

Move EnterReturn

HDMI Black Level

Normal

Low

Adjust EnterReturn

AUTO

3.8 HDMI Black Level

If a DVD player or set-top box is connected to the product via HDMI, image quality degradation (contrast/

color degradation, black level, etc.) may occur, depending on the connected source device. If this is the

case, correct the degraded picture quality using HDMI Black Level.

This function is only available in HDMI mode.

3.8.1 Configuring the HDMI Black Level Settings

1 Press any button on the front of the product to display the Function Key Guide.

Next, press [ ] to display the corresponding menu screen.

2 Press [ ] to move to PICTURE and press [ ] on the product.

3 Press [ ] to move to HDMI Black Level and press [ ] on the product.

The following screen will appear.

 Normal: Select this mode when there is no contrast ratio degradation.

 Low: Select this mode to reduce the black level and increase the white level when there is a

contrast ratio degradation.

4 Press [ ] to move to the option you want and press [ ].

5 The selected option will be applied.

HDMI Black Level may not be compatible with some source devices.

3 Screen Setup

Screen Setup

PICTURE

HDMI Black Level

H-Position

V-Position

Coarse

Fine

2200

Adjust EnterReturn

AUTO

Adjust EnterReturn

AUTO

Adjust EnterReturn

AUTO

HDMI Black Level

H-Position

V-Position

Coarse

Fine

2200

Adjust EnterReturn

AUTO

Adjust EnterReturn

AUTO

Adjust EnterReturn

AUTO

3.9 H-Position & V-Position

H-Position: Move the screen to the left or right.

V-Position: Move the screen up or down.

 This menu is available in Analog mode only.

 This menu is only available when Image Size is set to Screen Fit in AV Mode. When a 480P or

576P or 720P or 1080P signal is input in AV mode and the monitor can display normally, select

Screen Fit to adjust horizontal position in 0-6 levels.

3.9.1 Configuring H-Position & V-Position

1 Press any button on the front of the product to display the Function Key Guide.

Next, press [ ] to display the corresponding menu screen.

2 Press [ ] to move to PICTURE and press [ ] on the product.

3 Press [ ] to move to H-Position or V-Position, and press [ ].

The following screen will appear.

PICTURE

4 Press [ ] to configure H-Position or V-Position.

5 The selected option will be applied.

3 Screen Setup

Screen Setup

PICTURE

HDMI Black Level

H-Position

V-Position

Coarse

Fine

2200

Adjust EnterReturn

AUTO

Adjust EnterReturn

AUTO

Adjust EnterReturn

AUTO

3.10 Coarse

Adjust the screen frequency.

This menu is available in Analog mode only.

3.10.1 Adjusting Coarse

1 Press any button on the front of the product to display the Function Key Guide.

Next, press [ ] to display the corresponding menu screen.

2 Press [ ] to move to PICTURE and press [ ] on the product.

3 Press [ ] to move to Coarse and press [ ] on the product.

The following screen will appear.

4 Adjust the Coarse using the [ ] buttons.

5 The selected option will be applied.

3 Screen Setup

Screen Setup

PICTURE

HDMI Black Level

H-Position

V-Position

Coarse

Fine

2200

Adjust EnterReturn

AUTO

Adjust EnterReturn

AUTO

Adjust EnterReturn

AUTO

3.11 Fine

Fine-adjust the screen to obtain a vivid picture.

3.11.1 Adjusting Fine

1 Press any button on the front of the product to display the Function Key Guide.

Next, press [ ] to display the corresponding menu screen.

2 Press [ ] to move to PICTURE and press [ ] on the product.

3 Press [ ] to move to Fine and press [ ] on the product.

This menu is available in Analog mode only.

The following screen will appear.

4 Adjust the Fine using the [ ] buttons.

5 The selected option will be applied.

3 Screen Setup

Configuring Tint

SAMSUNG

MAGIC



COLOR

Red

Green

Blue

Color Tone

Gamma

Mode1

Normal

AUTO

Adjust the tint of the screen. This menu is not available when Bright is set to Cinema or

Dynamic Contrast mode.

4.1 Red

Adjust the value of the color red in the picture. (Range: 0~100)

A higher value will increase the intensity of the color.

4.1.1 Configuring Red

1 Press any button on the front of the product to display the Function Key Guide.

Next, press [ ] to display the corresponding menu screen.

2 Press [ ] to move to COLOR and press [ ] on the product.

3 Press [ ] to move to Red and press [ ] on the product.

The following screen will appear.

4 Adjust the Red using the [ ] buttons.

5 The selected option will be applied.

4 Configuring Tint

Configuring Tint



COLOR

Red

Green

Blue

Color Tone

Gamma

Mode1

Normal

Adjust EnterReturn

AUTO

4.2 Green

Adjust the value of the color green in the picture. (Range: 0~100)

A higher value will increase the intensity of the color.

4.2.1 Configuring Green

1 Press any button on the front of the product to display the Function Key Guide.

Next, press [ ] to display the corresponding menu screen.

2 Press [ ] to move to COLOR and press [ ] on the product.

3 Press [ ] to move to Green and press [ ] on the product.

The following screen will appear.

4 Adjust the Green using the [ ] buttons.

5 The selected option will be applied.

4 Configuring Tint

Configuring Tint



COLOR

Red

Green

Blue

Color Tone

Gamma

0RGH

Normal

Adjust EnterReturn

AUTO

4.3 Blue

Adjust the value of the color blue in the picture. (Range: 0~100)

A higher value will increase the intensity of the color.

4.3.1 Configuring Blue

1 Press any button on the front of the product to display the Function Key Guide.

Next, press [ ] to display the corresponding menu screen.

2 Press [ ] to move to COLOR and press [ ] on the product.

3 Press [ ] to move to Blue and press [ ] on the product.

The following screen will appear.

4 Adjust the Blue using the [ ] buttons.

5 The selected option will be applied.

4 Configuring Tint

Configuring Tint

SAMSUNG

MAGIC



COLOR

Red

Green

Blue

Color Tone

Gamma

Cool 2 Cool 1 Normal Warm 1 Warm 2 Custom

AUTO

4.4 Color Tone

Adjust the general color tone of the picture.

This menu is not available when Angle is enabled.

4.4.1 Configuring the Color Tone Settings

1 Press any button on the front of the product to display the Function Key Guide.

Next, press [ ] to display the corresponding menu screen.

2 Press [ ] to move to COLOR and press [ ] on the product.

3 Press [ ] to move to Color Tone and press [ ] on the product.

The following screen will appear.

 Cool 2: Set the color temperature to be cooler than Cool 1.

 Cool 1: Set the color temperature to be cooler than Normal mode.

 Normal: Display the standard color tone.

 Warm 1: Set the color temperature to be warmer than Normal mode.

 Warm 2: Set the color temperature to be warmer than Warm 1.

 Custom: Customize the color tone.

 When the external input is connected through HDMI and PC/AV Mode is set to AV,

Color Tone has four color temperature settings (Cool, Normal, Warm and Custom).

 The function may not be supported depending on the ports provided with the product.

4 Press [ ] to move to the option you want and press [ ].

5 The selected option will be applied.

4 Configuring Tint

Configuring Tint

SAMSUNG

MAGIC



COLOR

Red

Green

Blue

Color Tone

Gamma

Mode1 Mode2 Mode3

Normal

AUTO

4.5 Gamma

Adjust the mid-range brightness (Gamma) of the picture.

This menu is not available when Angle is enabled.

4.5.1 Configuring Gamma

1 Press any button on the front of the product to display the Function Key Guide.

Next, press [ ] to display the corresponding menu screen.

2 Press [ ] to move to COLOR and press [ ] on the product.

3 Press [ ] to move to Gamma and press [ ] on the product.

The following screen will appear.

4 Press [ ] to move to the option you want and press [ ].

5 The selected option will be applied.

4 Configuring Tint

Coordinating OSD





 20 sec

On

0(186(77,1*6

/DQJXDJH

0HQX+3RVLWLRQ

0HQX93RVLWLRQ

'LVSOD\7LPH

7UDQVSDUHQF\







'HXWVFK (QJOLVK (VSDxRO )UDQoDLV ,WDOLDQR 0DJ\DU 3ROVNL 3RUWXJXrV ƧǊǈǈǁƿǀ 6YHQVND 7UNoH

ଞ˲߭

∝䇁

AUTO

᪥ᮏㄒ

5.1 Language

Set the menu language.

 A change to the language setting will only be applied to the onscreen menu display.

 It will not be applied to other functions on your PC.

5.1.1 Configuring Language

1 Press any button on the front of the product to display the Function Key Guide.

Next, press [ ] to display the corresponding menu screen.

2 Press [ ] to move to MENU SETTINGS and press [ ] on the product.

3 Press [ ] to move to Language and press [ ] on the product.

The following screen will appear.

4 Press [ ] to move to the language you want and press [ ].

5 The selected option will be applied.

5 Coordinating OSD

Coordinating OSD

(QJOLVK



VHF

2Q

0(186(77,1*6





AUTO

/DQJXDJH

0HQX+3RVLWLRQ

0HQX93RVLWLRQ

'LVSOD\7LPH

7UDQVSDUHQF\



AUTO

(QJOLVK



 20 VHF

2Q

0(186(77,1*6

/DQJXDJH

0HQX+3RVLWLRQ

0HQX93RVLWLRQ

'LVSOD\7LPH

7UDQVSDUHQF\







AUTO

5.2 Menu H-Position & Menu V-Position

Menu H-Position: Move the menu position to the left or right.

Menu V-Position: Move the menu position up or down.

5.2.1 Configuring Menu H-Position & Menu V-Position

1 Press any button on the front of the product to display the Function Key Guide.

Next, press [ ] to display the corresponding menu screen.

2 Press [ ] to move to MENU SETTINGS and press [ ] on the product.

3 Press [ ] to move to Menu H-Position or Menu V-Position, and press [ ] on the

product.

The following screen will appear.

4 Press [ ] to configure Menu H-Position or Menu V-Position.

5 The selected option will be applied.

5 Coordinating OSD

Coordinating OSD

(QJOLVK



 20 sec

On

0(186(77,1*6

/DQJXDJH

0HQX+3RVLWLRQ

0HQX93RVLWLRQ

'LVSOD\7LPH

7UDQVSDUHQF\





AUTO



VHF VHF VHF VHF

AUTO

5.3 Display Time

Set the on-screen display (OSD) menu to automatically disappear if the menu is not used for a specified

period of time.

Display Time can be used to specify the time after which you want the OSD menu to disappear.

5.3.1 Configuring Display Time

1 Press any button on the front of the product to display the Function Key Guide.

Next, press [ ] to display the corresponding menu screen.

2 Press [ ] to move to MENU SETTINGS and press [ ] on the product.

3 Press [ ] to move to Display Time and press [ ] on the product.

The following screen will appear.

4 Press [ ] to move to the option you want and press [ ].

5 The selected option will be applied.

5 Coordinating OSD

Coordinating OSD

(QJOLVK



VHF

On

0(186(77,1*6

/DQJXDJH

0HQX+3RVLWLRQ

0HQX93RVLWLRQ

'LVSOD\7LPH

7UDQVSDUHQF\





AUTO



2II 2Q

AUTO

5.4 Transparency

Set the transparency for the menu windows:

5.4.1 Changing Transparency

1 Press any button on the front of the product to display the Function Key Guide.

Next, press [ ] to display the corresponding menu screen.

2 Press [ ] to move to MENU SETTINGS and press [ ] on the product.

3 Press [ ] to move to Transparency and press [ ] on the product.

The following screen will appear.

4 Press [ ] to move to the option you want and press [ ].

5 The selected option will be applied.

5 Coordinating OSD

Setup and Reset







6(7835(6(7

2II

$FFHOHUDWLRQ

0DQXDO

5HVHW

(FR6DYLQJ

2II7LPHU

7XUQ2II$IWHU

3&$90RGH

.H\5HSHDW7LPH

6RXUFH'HWHFWLRQ

AUTO

5HVHWDOOVHWWLQJV"

<HV 1R

EXIT

AUTO

6.1 Reset

Return all the settings for the product to the default factory settings.

6.1.1 Initializing Settings (Reset)

1 Press any button on the front of the product to display the Function Key Guide.

Next, press [ ] to display the corresponding menu screen.

2 Press [ ] to move to SETUP&RESET and press [ ] on the product.

3 Press [ ] to move to Reset and press [ ] on the product.

The following screen will appear.

4 Press [ ] to move to the option you want and press [ ].

5 The selected option will be applied.

6 Setup and Reset

Setup and Reset

SAMSUNG

MAGIC



6(7835(6(7

Off

$FFHOHUDWLRQ

0DQXDO

5HVHW

(FR6DYLQJ

2II7LPHU

7XUQ2II$IWHU

3&$90RGH

.H\5HSHDW7LPH

6RXUFH'HWHFWLRQ

ଥࢿ

2II

 

AUTO

6(7835(6(7

AUTO

6.2 Eco Saving

The Eco Saving function reduces power consumption by controlling the electric current used by the

monitor panel.

This menu is not available when Bright is in Dynamic Contrast mode.

6.2.1 Configuring Eco Saving

1 Press any button on the front of the product to display the Function Key Guide.

Next, press [ ] to display the corresponding menu screen.

2 Press [ ] to move to SETUP&RESET and press [ ] on the product.

3 Press [ ] to move to Eco Saving and press [ ] on the product.

The following screen will appear.

 75%: Change the monitor power consumption to 75% of the default level.

 50%: Change the monitor power consumption to 50% of the default level.

 Off: Deactivate the Eco Saving function.

4 Press [ ] to move to the option you want and press [ ].

5 The selected option will be applied.

6 Setup and Reset

Setup and Reset



6(7835(6(7

2II

$FFHOHUDWLRQ

0DQXDO

5HVHW

(FR6DYLQJ

2II7LPHU

7XUQ2II$IWHU

3&$90RGH

.H\5HSHDW7LPH

6RXUFH'HWHFWLRQ

AUTO

2II 2Q

AUTO

6.3 Off Timer

You can set the product to automatically turn off.

6.3.1 Configuring Off Timer

1 Press any button on the front of the product to display the Function Key Guide.

Next, press [ ] to display the corresponding menu screen.

2 Press [ ] to move to SETUP&RESET and press [ ] on the product.

3 Press [ ] to move to Off Timer and press [ ] on the product.

The following screen will appear.

 Off: Deactivate the off timer so that the product does not power off automatically.

 On: Activate the off timer so that the product powers off automatically.

4 Press [ ] to move to the option you want and press [ ].

5 The selected option will be applied.

6 Setup and Reset

Setup and Reset



6(7835(6(7

2II

$FFHOHUDWLRQ

0DQXDO

5HVHW

(FR6DYLQJ

2II7LPHU

7XUQ2II$IWHU

3&$90RGH

.H\5HSHDW7LPH

6RXUFH'HWHFWLRQ

K

AUTO

6.4 Turn Off After

The off timer can be set within a range of 1 to 23 hours. The product will automatically power off after the

specified number of hours.

This option is only available when Off Timer is set to On.

6.4.1 Configuring Turn Off After

1 Press any button on the front of the product to display the Function Key Guide.

Next, press [ ] to display the corresponding menu screen.

2 Press [ ] to move to SETUP&RESET and press [ ] on the product.

3 Press [ ] to move to Turn Off After and press [ ] on the product.

The following screen will appear.

4 Press [ ] to configure Turn Off After.

5 The selected option will be applied.

For products for the market in Europe, the Off Timer is set to automatically activate 4 hours after the

product powers on. This is done in accordance with power supply regulations. If you do not want the

timer to activate, go to MENU SETUP&RESET and set Off Timer to Off.

→

6 Setup and Reset

Setup and Reset



6(7835(6(7

2II

$FFHOHUDWLRQ

0DQXDO

5HVHW

(FR6DYLQJ

2II7LPHU

7XUQ2II$IWHU

3&$90RGH

.H\5HSHDW7LPH

6RXUFH'HWHFWLRQ

K

AUTO



3&$90RGH

HDMI

AUTO

PC AV

6.5 PC/AV Mode

Set PC/AV Mode to AV. The picture size will be enlarged. This option is useful when you view a movie.

 This function does not support Analog mode.

 Supplied for the wide models only such as 16:9 or 16:10.

6.5.1 Configuring PC/AV Mode

1 Press any button on the front of the product to display the Function Key Guide.

Next, press [ ] to display the corresponding menu screen.

2 Press [ ] to move to SETUP&RESET and press [ ] on the product.

3 Press [ ] to move to PC/AV Mode and press [ ] on the product.

The following screen will appear.

4 Press [ ] to move to the option you want and press [ ].

5 The selected option will be applied.

6 Setup and Reset

Setup and Reset



6(7835(6(7

2II

Acceleration

Manual

5HVHW

(FR6DYLQJ

2II7LPHU

7XUQ2II$IWHU

3&$90RGH

.H\5HSHDW7LPH

6RXUFH'HWHFWLRQ

$FFHOHUDWLRQ VHF VHF 1R5HSHDW

AUTO

6.6 Key Repeat Time

Control the response rate of a button when the button is pressed.

6.6.1 Configuring Key Repeat Time

1 Press any button on the front of the product to display the Function Key Guide.

Next, press [ ] to display the corresponding menu screen.

2 Press [ ] to move to SETUP&RESET and press [ ] on the product.

3 Press [ ] to move to Key Repeat Time and press [ ] on the product.

The following screen will appear.

 Acceleration, 1 sec, or 2 sec can be selected. If No Repeat is selected, a command responds

only once when a button is pressed.

4 Press [ ] to move to the option you want and press [ ].

5 The selected option will be applied.

6 Setup and Reset

Setup and Reset



6(7835(6(7

2II

$FFHOHUDWLRQ

5HVHW

(FR6DYLQJ

2II7LPHU

7XUQ2II$IWHU

3&$90RGH

.H\5HSHDW7LPH

6RXUFH'HWHFWLRQ

K

AUTO

$XWR 0DQXDO

6.7 Source Detection

You can activate Source Detection.

6.7.1 Configuring Source Detection

1 Press any button on the front of the product to display the Function Key Guide.

Next, press [ ] to display the corresponding menu screen.

2 Press [ ] to move to SETUP&RESET and press [ ] on the product.

3 Press [ ] to move to Source Detection and press [ ] on the product.

The following screen will appear.

 Auto: The input source is automatically recognized.

 Manual: Manually select an input source.

4 Press [ ] to move to the option you want and press [ ].

5 The selected option will be applied.

6 Setup and Reset

Setup and Reset



6(7835(6(7

&XVWRPL]HG.H\

$FFHOHUDWLRQ

(FR6DYLQJ ,PDJH6L]H

SAMSUNG

MAGIC

Angle

AUTO

SAMSUNG

MAGIC

Bright

SAMSUNG

MAGIC

SAMSUNG

MAGIC

6.8 Customized Key

You can customize Customized Key as follows.

6.8.1 Configuring Customized Key

1 Press any button on the front of the product to display the Function Key Guide.

Next, press [ ] to display the corresponding menu screen.

2 Press [ ] to move to SETUP&RESET and press [ ] on the product.

3 Press [ ] to move to Customized Key and press [ ] on the product.

The following screen will appear.

 Angle - Bright - Eco Saving - Image Size

4 Press [ ] to move to the option you want and press [ ].

5 The selected option will be applied.

6 Setup and Reset

INFORMATION Menu and Others

SETUP&RESET

Analog **kHz **Hz NP **** x ****

Optimal Mode **** x **** **Hz

֩ЍیԂ ۴࣏ࢽ

PICTURE

COLOR

MENU SETTINGS

INFORMATION

AUTOEXIT AUTO

EXIT

7.1 INFORMATION

View the current input source, frequency and resolution.

7.1.1 Displaying INFORMATION

1 Press any button on the front of the product to display the Function Key Guide.

Next, press [ ] to display the corresponding menu screen.

2 Press [ ] to move to INFORMATION.

The current input source, frequency and resolution will appear.

The displayed menu items may vary depending on the model.

7 INFORMATION Menu and Others

INFORMATION Menu and Others

%ULJKWQHVV

100

&RQWUDVW

EXIT

7.2 Configuring Brightness and Contrast in the Initial Screen

Adjust the Brightness, Contrast using the [ ] buttons when the initial screen (that displays no menu

screen) is displayed.

1 Press any button on the front of the product (when no menu screen is displayed) to display the

Function Key Guide.

Next, press [ ]. The following screen will appear.

2 Press the [ ] button to alternate between the Brightness and Contrast settings.

3 Adjust the Brightness, Contrast using the [ ] buttons.

7 INFORMATION Menu and Others

Installing the Software

8.1 MagicTune

8.1.1 What is "MagicTune"?

"MagicTune" is a software program that helps with monitor adjustments by providing comprehensive

descriptions of monitor functions and easy-to-understand guidelines.

You can adjust the product with the mouse and the keyboard without using the operating buttons of the

product.

8.1.2 Installing the Software

1 Insert the installation CD into the CD-ROM drive.

2 Select the "MagicTune" setup program.

If the pop-up screen for the software installation does not appear on the main screen, find and

double-click the "MagicTune" setup file on the CD-ROM.

3 Select the installation language and click Next.

4 Complete the remaining software installation steps according to the instructions displayed on the

screen.

 The software may not work properly if you do not restart the computer after the installation.

 The "MagicTune" icon may not appear depending on the computer system and the product

specifications.

 If the shortcut icon does not appear, press the F5 key.

Restrictions and Problems with the Installation ("MagicTune™")

The installation of "MagicTune™" may be affected by the Graphics Card, Motherboard and the

Networking Environment.

System Requirements

 Windows XP, Windows Vista, Windows 7, Windows 8

8 Installing the Software

Installing the Software

8.1.3 Removing the Software

You can only remove "MagicTune™" through Add or Remove Programs in Windows.

To remove "MagicTune™", complete the following steps.

1 Click Start select Settings, and select Control Panel from the menu.

For Windows XP, click Start, and select Control Panel from the menu.

2 Double-click the Add or Remove Programs icon in the Control Panel.

3 In the Add/Remove window, find and select "MagicTune™" so that it is highlighted.

4 Click Change or Remove Programs to remove the software.

5 Select Yes to start removing "MagicTune™".

6 Wait until a message box appears informing you that the software has been removed completely.

For technical support, the FAQ (frequently asked questions) or information about the software

upgrade for "MagicTune™", please visit our website (http://www.samsung.com/us/consumer/

learningresources/monitor/magetune/pop_intro.html).

8 Installing the Software

Installing the Software

MultiScreen

8.2 MultiScreen

"MultiScreen" enables users to use the monitor by partitioning multiple sections.

8.2.1 Installing the Software

1 Insert the installation CD into the CD-ROM drive.

2 Select the "MultiScreen" setup program.

If the pop-up screen for the software installation does not appear on the main screen, find and

double-click the "MultiScreen" setup file on the CD-ROM.

3 When the Installation Wizard appears, click Next.

4 Complete the remaining software installation steps according to the instructions displayed on the

screen.

Restrictions and Problems with the Installation ("MultiScreen")

The "MultiScreen" installation may be affected by the Graphics Card, Motherboard and the Networking

Environment.

System Requirements

 The software may not work properly if you do not restart the computer after the installation.

 The "MultiScreen" icon may not appear depending on the computer system and the product

specifications.

 If the shortcut icon does not appear, press the F5 key.

 Windows™ 2000

 Windows XP Home Edition

 Windows XP Professional

 Windows Vista 32Bit

 Windows 7 32Bit

 Windows 8 32Bit

For "MultiScreen", the operating systems Windows 2000 or later is recommended.

8 Installing the Software

Installing the Software

Hardware

 At least 32MB of memory

 At least 60MB of free space on the hard disk drive

8.2.2 Removing the Software

Click Start, select Settings/Control Panel, and then double-click Add or Remove Programs.

Select "MultiScreen" from the program list and click the Add/Delete button.

8 Installing the Software

Troubleshooting Guide

9.1 Requirements Before Contacting Samsung Customer Service Center

9.1.1 Testing the Product

Before calling Samsung Customer Service Center, test your product as follows. If the problem persists,

contact Samsung Customer Service Center.

Check if your product is operating normally by using the product test function.

If the screen is turned off and the power indicator blinks even though the product is properly connected

to a PC, perform a self-diagnosis test.

1 Power off both the PC and product.

2 Disconnect the cables from the product.

3 Power on the product.

4 If the message Check Signal Cable appears, the product is working normally.

9.1.2 Checking the Resolution and Frequency

For a mode that exceeds the supported resolution (refer to "10.3 Standard Signal Mode Table"),

the message Not Optimum Mode will appear for a short time.

9.1.3 Check the following.

Installation issue (PC mode)

The screen keeps switching on and off. Check the cable connection between the product

If the screen remains blank, check the PC system, video controller and cable.

Issues Solutions

and PC, and ensure the connectors are locked.

(Refer to "2.2 Connecting and Using a PC")

9 Troubleshooting Guide

Troubleshooting Guide

Screen issue

Issues Solutions

The power LED is off. The screen will not switch on.

The message Check Signal Cable appears. Check that the cable is properly connected to the

Not Optimum Mode is displayed. This message appears when the signal from the

The images on the screen look distorted. Check the cable connection to the product.

The screen is not clear. The screen is blurry. Adjust Coarse and Fine.

Check that the power cable is connected properly.

(Refer to "2.2 Connecting and Using a PC")

product.

(Refer to "2.2 Connecting and Using a PC")

Check that the device connected to the product is powered on.

graphics card exceeds the maximum resolution or frequency for the product.

Change the maximum resolution and frequency to suit the product performance, referring to Standard Signal Mode Table (page 82).

(Refer to "2.2 Connecting and Using a PC")

Remove any accessories (video extension cable, etc.) and try again.

Set the resolution and frequency to the recommended level.

The screen appears unstable and shaky. Check that the resolution and frequency for the

There are shadows or ghost images left on the screen.

The screen is too bright. The screen is too dark. Adjust Brightness and Contrast.

Screen color is inconsistent. Change the COLOR settings.

The colors on the screen have a shadow and are distorted.

White does not really look white. Change the COLOR settings.

PC are within the range of resolution and frequency compatible with the product. Next, if required, change the settings, referring to Standard Signal Mode Table (page 82) in this manual and the INFORMATION menu on the product.

(Refer to " Configuring Tint")

Change the COLOR settings.

(Refer to " Configuring Tint")

9 Troubleshooting Guide

Troubleshooting Guide

Issues Solutions

There is no image on the screen and the power LED blinks every 0.5 to 1 second.

Source device issue

Issues Solutions

A beeping sound is heard when my PC is booting. If a beeping sound is heard when your PC is

The product is operating in power-saving mode.

Press any key on the keyboard or move the mouse to return to normal operating mode.

booting, have your PC serviced.

9 Troubleshooting Guide

Troubleshooting Guide

9.2 Q & A

Question Answer

How can I change the frequency?

Set the frequency on your graphics card.



Windows XP: Go to

Display

Refresh rate



Windows ME/2000: Go to

Advanced

Monitor settings



Windows Vista: Go to

Appearance and Personalization

Display Settings

Refresh rate



Windows 7: Go to

Appearance and Personalization

Screen Resolution

adjust



Windows 8: Go to

Appearance and Personalization

Screen Resolution

adjust

Refresh rate

Control Panel

Settings

under

Monitor settings

Monitor

under

Monitor settings

Control Panel

under

Settings

under

Advanced

Control Panel

, and adjust

Control Panel

Advanced Settings

Advanced settings

Monitor settings

Control Panel

Advanced settings

Monitor settings

Appearance and Themes

Monitor

Refresh rate

Personalization

Display

Monitor

, and adjust

under

, and adjust

Settings

, and

9 Troubleshooting Guide

Troubleshooting Guide

Question Answer

How can I change the resolution?

How do I set power-saving mode?



Windows XP: Go to

Display



Windows ME/2000: Go to

and adjust the resolution.



Windows Vista: Go to

Appearance and Personalization

Display Settings



Windows 7: Go to

Appearance and Personalization

Adjust Resolution



Windows 8: Go to

Appearance and Personalization

Adjust Resolution



Windows XP: Set power-saving mode in

Appearance and Themes

or BIOS SETUP on the PC.



Windows ME/2000: Set power-saving mode in

Display

Screen Saver Settings

Control Panel

Settings

, and adjust the resolution.

Control Panel

, and adjust the resolution.

Control Panel

, and adjust the resolution.

Settings

, and adjust the resolution.

Control Panel

Display

or BIOS SETUP on the PC.

Appearance and Themes

Display

Personalize

Display

Control Panel

Screen Saver Settings

Settings

Control Panel



Windows Vista: Set power-saving mode in

Appearance and Personalization

Screen Saver Settings



Windows 7: Set power-saving mode in

Appearance and Personalization

Screen Saver Settings



Windows 8: Set power-saving mode in

Appearance and Personalization

Screen Saver Settings

Refer to the user manual for your PC or graphics card for further instructions on adjustment.

or BIOS SETUP on the PC.

Personalize

Control Panel

Personalize

Settings

Control Panel

Personalize

9 Troubleshooting Guide

Specifications

10.1 General

Model Name S27C390H

Panel

Synchronization Horizontal

Display Color

Resolution Optimum

Input Signal, Terminated RGB Analog, HDMI (High Definition Multimedia Interface)

Size 68 cm

Display area 597.60 mm (H) x 336.15 mm (V)

Pixel Pitch 0.31125 mm (H) x 0.31125 mm (V)

30 ~ 81 kHz

Frequency

Vertical Frequency

Resolution

Maximum Resolution

56 ~ 75 Hz

16.7 M

1920 x 1080 @ 60 Hz

0.7 Vp-p ± 5%

separate H/V sync, Composite, SOG

TTL level (V high ≥ 2.0V, V low ≤ 0.8V)

Maximum Pixel Clock 148 MHz (Analog, HDMI)

Power Supply

Signal connectors 15pin-to-15pin D-sub cable, Detachable

Dimensions (W x H x D) / Weight

Environmental considerations

Without Stand 643 x 398 x 55 mm

With Stand 643 x 470 x 252 mm / 4.2 kg

Operating Temperature : 10°C ~ 40°C (50°F ~ 104°F)

Storage Temperature : -20°C ~ 45°C (-4°F ~ 113°F)

This product supports 100-240 V. Since the standard voltage may differ from country to country, please check the label on the back of the product.

HDMI to DVI Cable, Detachable

HDMI Cable, Detachable

Humidity : 10 % – 80 %, non-condensing

Humidity : 5 % – 95 %, non-condensing

10 Specifications

Specifications

Model Name S27C390H

Plug-and-Play This monitor can be installed and used with any Plug-and-Play

compatible systems. Two-way data exchange between the monitor and PC system optimizes the monitor settings. Monitor installation takes place automatically. However, you can customize the installation settings if desired.

Panel Dots (Pixels) Due to the nature of the manufacturing of this product,

approximately 1 pixel per million (1ppm) may be brighter or darker on the LCD panel. This does not affect product performance.

The above specifications are subject to change without notice to improve quality.

This device is a Class B digital apparatus.

10 Specifications

Specifications

10.2 PowerSaver

The power-saving function of this product reduces power consumption by switching off the screen and

controlling the power LED status if the product is not used for a specified period of time.

The power is not turned off in power-saving mode. To switch the screen back on, press any key on the

keyboard or move the mouse. Power-saving mode functions only when the product is connected to a

PC that has a power-saving function.

PowerSaver

Power Indicator On Blinking Off

Power Consumption 25 W Typical 0.3 W Typical 0.3 W

 The power consumption level can vary in different operating conditions or when settings are

changed.

(S*C390 Model Power saving mode / Power off (Power button) : Max 0.45 watts.)

 ENERGY STAR

Energy Star power is measured with the test method in the current Energy Star

 To reduce the power consumption to 0 watts, turn off the power switch on the back of the product

or disconnect the power cable. Be sure to disconnect the power cable when you will not be using the product for an extended period of time. To reduce the power consumption to 0 watts when the power switch is not available, disconnect the power cable.

Energy Star

Power Consumption

is a US registered mark of the United States Environmental Protection Agency.

Power saving mode

Power off

(Power button)

Standard.

10 Specifications

Specifications

10.3 Standard Signal Mode Table

 This product can be set to only one resolution for each screen size to obtain the optimum picture

quality due to the nature of the panel. Therefore, a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for the screen size of your product.

 Check the frequency when you exchange a CDT monitor (connected to a PC) for an LCD monitor.

If the LCD monitor does not support 85Hz, change the vertical frequency to 60Hz using the CDT monitor before you exchange it with the LCD monitor.

If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will

automatically be adjusted. If the signal transmitted from the PC does not belong to the standard signal

modes, the screen may be blank even though the power LED turns on. In such a case, change the

settings according to the following table by referring to the graphics card user manual.

Horizontal

Resolution

IBM, 720 x 400 31.469 70.087 28.322 -/+

MAC, 640 x 480

MAC, 832 x 624

MAC, 1152 x 870

VESA, 640 x 480

VESA, 640 x 480 37.500 75.

VESA, 800 x 600

VESA, 800 x 600 48.077

VESA, 800 x 600 46.875 75.000 49.500 +/+

VESA, 1024 x 768

Frequency

(kHz)

35.000

49.726 74.551

68.681

31.469

37.861

35.156

37.879

48.363

56.476

Vertical

Frequency

(Hz)

66.667 30.240 -/-

75.062 100.000 -/-

59.940

72.809 31.500 -/-

000

56.250 36.000 +/+

60.317 40.000 +/+

72.188 50.000

60.004 65.000 -/-

70.069 75.000 -/-

Pixel Clock

(MHz)

57.284 -/-

25.175

31.500 -/-

Sync Polarity

(H/V)

-/-

+/+

VESA, 1024 x 768

VESA, 1152 x 864

VESA, 1280 x 720

VESA, 1280 x 800

VESA, 1280 x 1024

60.023

67.500 75.000 108.000 +/+

45.000 60.000 74.250 +/+

49.702 59.810 83.500 -/+

63.981 60.020 108.000 +/+

79.976 75.025 135.000 +/+

75.029 78.750 +/+

10 Specifications

Specifications

Resolution

VESA, 1440 x 900

VESA, 1600 x 900 (RB)

VESA, 1680 x 1050

VESA, 1920 x 1080p

 Horizontal Frequency

The time required to scan a single line from the left to the right side of the screen is called a

horizontal cycle. The reciprocal number of a horizontal cycle is called horizontal frequency.

Horizontal frequency is measured in kHz.

 Vertical Frequency

Repeating the same picture dozens of times per second allows you to view natural pictures.

The repeat frequency is called "vertical frequency" or "refresh rate" and is indicated in Hz.

Horizontal

Frequency

(kHz)

55.935 59.887 106.500 -/+

60.000 60.000 108.000 +/+

65.290 59.954 146.250 -/+

67.500 60.000 148.500 +/+

Vertical

Frequency

(Hz)

Pixel Clock

(MHz)

Sync Polarity

(H/V)

10 Specifications

Appendix

01-8000 112 112 Bogotá: 6001272

Contact SAMSUNG WORLD WIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG

customer care center.

NORTH AMERICA

U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung.com

CANADA 1-800-SAMSUNG (726-7864) http://www.samsung.com/ca

MEXICO 01-800-SAMSUNG (726-7864) http://www.samsung.com

(English)

http://www.samsung.com/ca_fr (French)

LATIN AMERICA

ARGENTINE 0800-333-3733 http://www.samsung.com

BOLIVIA 800-10-7260 http://www.samsung.com

BRAZIL 0800-124-421

4004-0000

CHILE 800-SAMSUNG (726-7864)

From mobile 02-24 82 82 00

COLOMBIA

COSTA RICA 0-800-507-7267 http://www.samsung.com/latin

DOMINICA 1-800-751-2676 http://www.samsung.com/latin

http://www.samsung.com

http://www.samsung.com/cl

http://www.samsung.com/co

(Spanish)

http://www.samsung.com/latin_en (English)

(Spanish)

http://www.samsung.com/latin_en (English)

ECUADOR 1-800-10-7267 http://www.samsung.com/latin

(Spanish)

http://www.samsung.com/latin_en (English)

EL SALVADOR 800-6225 http://www.samsung.com/latin

(Spanish)

http://www.samsung.com/latin_en (English)

Appendix

LATIN AMERICA

GUATEMALA 1-800-299-0013 http://www.samsung.com/latin

(Spanish)

http://www.samsung.com/latin_en (English)

HONDURAS 800-27919267 http://www.samsung.com/latin

(Spanish)

http://www.samsung.com/latin_en (English)

JAMAICA 1-800-234-7267 http://www.samsung.com

NICARAGUA 00-1800-5077267 http://www.samsung.com/latin

(Spanish)

http://www.samsung.com/latin_en (English)

PANAMA 800-7267 http://www.samsung.com/latin

(Spanish)

http://www.samsung.com/latin_en (English)

PARAGUAY 009-800-542-0001 http://www.samsung.com

PERU 0-800-777-08 (Only from landline)

336-8686 (From HHP & landline)

PUERTO RICO 1-800-682-3180 http://www.samsung.com

TRINIDAD & TOBAGO 1-800-SAMSUNG (726-7864) http://www.samsung.com

URUGUAY 000-405-437-33 http://www.samsung.com

VENEZUELA 0-800-100-5303 http://www.samsung.com

EUROPE

AUSTRIA 0810 - SAMSUNG

(7267864, € 0.07/min)

http://www.samsung.com

BELGIUM 02-201-24-18 http://www.samsung.com/be

(Dutch)

http://www.samsung.com/be_fr (French)

BOSNIA 051 133 1999 http://www.samsung.com

BULGARIA 07001 33 11 , normal tariff http://www.samsung.com

CROATIA 062 SAMSUNG (062 726 786) http://www.samsung.com

Appendix

Samsung Electronics Czech and Slovak, s.r.o., Oasis Florenc, Sokolovská 394/17, 180 00, Praha 8 till 8.2.2013 . From 8.2.2013: Samsung Electronics Czech and Slovak, s.r.o. V Parku 2343/24, 148 00 - Praha 4

0 801-1SAMSUNG(172-678) * lub +48 22 607-93-33 **     

EUROPE

CYPRUS 8009 4000 only from landline

(+30) 210 6897691 from mobile and land line

CZECH 800 - SAMSUNG (800-726786) http://www.samsung.com

DENMARK 70 70 19 70 http://www.samsung.com

EIRE 0818 717100 http://www.samsung.com

ESTONIA 800-7267 http://www.samsung.com/ee

FINLAND 030-6227 515 http://www.samsung.com

FRANCE 01 48 63 00 00 http://www.samsung.com/fr

GERMANY 0180 5 SAMSUNG bzw.

0180 5 7267864* (*0,14 €/Min. aus dem dt. Festnetz, aus dem Mobilfunk max. 0,42 €/Min.)

http://www.samsung.com

GREECE 80111-SAMSUNG (80111 726

7864) only from land line

(+30) 210 6897691 from mobile and land line

HUNGARY 06-80-SAMSUNG (726-7864) http://www.samsung.com

ITALIA 800-SAMSUNG (726-7864) http://www.samsung.com

LATVIA 8000-7267 http://www.samsung.com/lv

LITHUANIA 8-800-77777 http://www.samsung.com/lt

LUXEMBURG 261 03 710 http://www.samsung.com

MONTENEGRO 020 405 888 http://www.samsung.com

NETHERLANDS 0900 - SAMSUNG

(0900-7267864) (€ 0,10/Min)

NORWAY 815 56480 http://www.samsung.com

POLAND

http://www.samsung.com

http://www.samsung.com/pl

Appendix

EUROPE

PORTUGAL 808 20 - SAMSUNG (808 20 7267) http://www.samsung.com

ROMANIA 08008 SAMSUNG (08008 726

7864)

TOLL FREE No.

SERBIA +381 11 321 6899

(old number still active 0700

7267864)

SLOVAKIA 0800 - SAMSUNG (0800-726 786) http://www.samsung.com

SPAIN 902 - 1 - SAMSUNG (902 172 678) http://www.samsung.com

SWEDEN 0771 726 7864 (SAMSUNG) http://www.samsung.com

SWITZERLAND 0848-SAMSUNG

(7267864, CHF 0.08/min)

U.K 0330 SAMSUNG (7267864) http://www.samsung.com

CIS

ARMENIA 0-800-05-555 http://www.samsung.com

http://www.samsung.com

http://www.samsung.com/ch (German)

http://www.samsung.com/ch_fr (French)

AZERBAIJAN 088-55-55-555 http://www.samsung.com

BELARUS 810-800-500-55-500 http://www.samsung.com

GEORGIA 0-800-555-555 http://www.samsung.com

KAZAKHSTAN 8-10-800-500-55-500

(GSM: 7799)

KYRGYZSTAN 00-800-500-55-500 http://www.samsung.com

MOLDOVA 0-800-614-40 http://www.samsung.com

MONGOLIA +7-800-555-55-55 http://www.samsung.com

RUSSIA 8-800-555-55-55 http://www.samsung.com

TADJIKISTAN 8-10-800-500-55-500 http://www.samsung.com

UKRAINE 0-800-502-000 http://www.samsung.com/ua

UZBEKISTAN 8-10-800-500-55-500 http://www.samsung.com

http://www.samsung.com

(Ukrainian)

http://www.samsung.com/ua_ru (Russian)

Appendix

ASIA PACIFIC

AUSTRALIA 1300 362 603 http://www.samsung.com

CHINA 400-810-5858 http://www.samsung.com

HONG KONG (852) 3698 - 4698 http://www.samsung.com/hk

(Chinese)

http://www.samsung.com/hk_en (English)

INDIA 1800 3000 8282

1800 266 8282

INDONESIA 0800-112-8888

021-5699-7777

JAPAN 0120-327-527 http://www.samsung.com

MALAYSIA 1800-88-9999 http://www.samsung.com/my

NEW ZEALAND 0800 SAMSUNG (0800 726 786) http://www.samsung.com

PHILIPPINES 1-800-10-SAMSUNG (726-7864)

for PLDT

1-800-3-SAMSUNG (726-7864) for Digitel

1-800-8-SAMSUNG (726-7864) for Globe

02-5805777

SINGAPORE 1800-SAMSUNG (726-7864) http://www.samsung.com

TAIWAN 0800-329-999

0266-026-066

http://www.samsung.com/in

http://www.samsung.com/id

http://www.samsung.com/ph

http://www.samsung.com

THAILAND 1800-29-3232

02-689-3232

VIETNAM 1 800 588 889 http://www.samsung.com

MENA

BAHRAIN 8000-4726 http://www.samsung.com/ae

EGYPT 08000-726786 http://www.samsung.com

IRAN 021-8255 http://www.samsung.com

JORDAN 800-22273

065777444

http://www.samsung.com/th

(English)

http://www.samsung.com/ae_ar (Arabic)

http://www.samsung.com/Levant (English)

Appendix

MENA

KUWAIT 183-2255 (183-CALL) http://www.samsung.com/ae

(English)

http://www.samsung.com/ae_ar (Arabic)

MOROCCO 080 100 2255 http://www.samsung.com

OMAN 800-SAMSUNG (726-7864) http://www.samsung.com/ae

(English)

http://www.samsung.com/ae_ar (Arabic)

QATAR 800-2255 (800-CALL) http://www.samsung.com/ae

(English)

http://www.samsung.com/ae_ar (Arabic)

SAUDI ARABIA 9200-21230 http://www.samsung.com/sa

(Arabic)

SYRIA 18252273 http://www.samsung.com/Levant

(English)

TURKEY 444 77 11 http://www.samsung.com

U.A.E 800-SAMSUNG (726-7864) http://www.samsung.com

AFRICA

ANGOLA 91-726-7864 http://www.samsung.com

BOTSWANA 0800-726-000 http://www.samsung.com

CAMEROON 7095- 0077 http://www.samsung.com

COTE D’ IVOIRE 8000 0077 http://www.samsung.com

GHANA 0800-10077

0302-200077

http://www.samsung.com

KENYA 0800 545 545 http://www.samsung.com

NAMIBIA 8197267864 http://www.samsung.com

NIGERIA 0800-726-7864 http://www.samsung.com

SENEGAL 800-00-0077 http://www.samsung.com

SOUTH AFRICA 0860-SAMSUNG (726-7864) http://www.samsung.com

TANZANIA 0685 88 99 00 http://www.samsung.com

UGANDA 0800 300 300 http://www.samsung.com

ZAMBIA 211350370 http://www.samsung.com

Appendix

Responsibility for the Pay Service (Cost to Customers)

When the service is requested, in spite of in warranty, we may charge you for a visit from a service

technician in the following cases.

Not a product defect

Cleaning of the product, Adjustment, Explanation, Re-installation and etc.

 If a service technician gives instructions on how to use product or simply adjusts options without

disassembling product.

 If a defect is caused by external environmental factors. (Internet, Antenna, Wired Signal, etc.)

 If a product is reinstalled or devices are connected additionally after installing the purchased product

for the first time.

 If a product is reinstalled to move to a different spot or to move to a different house.

 If customer requests instructions on how to use because of another company's product.

 If customer requests instructions on how to use the network or another company's program.

 If customer requests software installation and setup for the product.

 If a service technician removes/cleans dusts or foreign materials inside of the product.

 If customer requests an installation additionally after purchasing a product through home-shopping

or online.

A Product damage caused by customer's fault

Product damage caused by customer's mishandling or wrong repair

If a product damage is caused by;

 external impact or drop.

 use of supplies or separately sold product unspecified by Samsung.

 repair from a person besides an engineer of outsourcing service company or partner of Samsung

Electronics Co., Ltd.

 remodeling or repairing the product by customer.

 using it with incorrect voltage or non-authorised electrical connections.

 not following the "cautions" in User Manual.

Others

 If product fails by natural disaster. (lightning, fire, earthquake, flood damage, etc)

 If consumable components are all used up. (Battery, Toner, Fluorescent lights, Head, Vibrator,

Lamp, Filter, Ribbon, etc.)

Appendix

If customer requests a service in case the product has no defect, service fee may be charged. So

please read User Manual first.

Appendix

Correct Disposal

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

(Applicable in countries with separate collection systems)

This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

(India Only)

For more information on safe disposal and recycling visit our

website www.samsung.com/in or contact our Helpline numbers -

18002668282, 180030008282.

Appendix

Terminology

OSD (On Screen Display)

On screen display (OSD) allows you to customize on-screen settings to optimize the picture quality as

required. You can change the screen brightness, tint, size and many other settings using menus

displayed on the screen.

Gamma

The Gamma menu adjusts the grey scale that represents middle tones on the screen. Adjusting the

brightness brightens the whole screen, but adjusting Gamma only brightens the medium brightness.

Grey scale

Scale refers to levels of color intensity that show variations of color change from darker areas to

brighter areas on the screen. Changes to the screen brightness are expressed with black and white

variation, and grey scale refers to the medium area between black and white. Changing the grey scale

through Gamma adjustment will change the medium brightness on the screen.

Scanning rate

Scanning rate, or refresh rate, refers to the frequency of screen refreshes. Screen data is transmitted

as it refreshes to display an image, although the refreshing is invisible to the naked eye. The number of

screen refreshes is called scanning rate and is measured in Hz. A scanning rate of 60Hz means that

the screen refreshes 60 times per second. The screen scanning rate depends on the performance of

the graphics cards in your PC and monitor.

Horizontal Frequency

Characters or images displayed on the monitor screen consist of numerous dots (pixels). Pixels are

transmitted in horizontal lines, which are then arranged vertically to create an image. The horizontal

frequency is measured in kHz and represents how many times horizontal lines per second are

transmitted and displayed on the monitor screen. A horizontal frequency of 85 means that the

horizontal lines that make up an image are transmitted 85000 times per second. The horizontal

frequency is indicated in 85kHz.

Vertical Frequency

One image is made of numerous horizontal lines. The vertical frequency is measured in Hz and

represents how many images can be created per second by those horizontal lines. A vertical

frequency of 60 means that an image is transmitted 60 times per second. The vertical frequency is

also called "refresh rate" and affects screen flicker.

Appendix

Resolution

Resolution is the number of horizontal pixels and vertical pixels that form a screen. It represents the

level of display detail.

A higher resolution displays a greater amount of information on the screen and is suitable for

performing multiple tasks at the same time.

E.g. A resolution of 1366 x 768 consists of 1366 horizontal pixels (horizontal resolution) and 768

vertical lines (vertical resolution).

E.g. A resolution of 1920 x 1080 consists of 1920 horizontal pixels (horizontal resolution) and 1080

vertical lines (vertical resolution).

Plug & Play

The Plug & Play feature allows the automatic exchange of information between a monitor and PC to

produce an optimum display environment.

The monitor uses VESA DDC (international standard) to execute Plug & Play.

Appendix

Index

Before Connecting 28

Blue 53

Brightness 38

Checking the Contents 19

Coarse 49

Color Tone 54

Connecting and Using a PC 29

Contrast 39

Correct Disposal 92

Correct posture to use the product 18

Customized Key 67

Display Time 58

Image Size 45

INFORMATION 68

Installation 24

Key Repeat Time 65

Language 56

MagicTune 70

MultiScreen 72

Off Timer 62

Eco Saving 61

Fine 50

Gamma 55

General 79

Green 52

HDMI Black Level 47

Parts 21

PC/AV Mode 64

Q & A 77

Red 51

Requirements Before Contacting Samsung

Customer Service Center

Reset 60

Responsibility for the Pay Service (Cost to

Customers)

Index

Safety Precautions 10

SAMSUNG MAGIC Angle 43

SAMSUNG MAGIC Bright 41

SAMSUNG MAGIC Upscale 44

Sharpness 40

Source Detection 66

Standard Signal Mode Table 82

Terminology 93

Transparency 59

Turn Off After 63

Index

Samsung LS27B350HSZ-ZA User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Table Of Contents

Copyright

Before Using the Product

Icons used in this manual

Cleaning

Securing the Installation Space

Precautions for storage

Safety Precautions

Symbols for safety precautions

Electricity and Safety

Installation and Safety

Operation

Correct posture to use the product

Preparations

1.1 Checking the Contents

1.1.1 Removing the Packaging

1.1.2 Checking the Components

1.2 Parts

1.2.1 Frontal Button

1.2.2 Reverse Side

1.3 Installation

1.3.1 Attaching the Stand

1.3.2 Removing the Stand

1.3.3 Adjusting the Product Tilt

1.3.4 Anti-theft Lock

Connecting and Using a Source Device

2.1 Before Connecting

2.1.1 Pre-connection Checkpoints

2.2 Connecting and Using a PC

2.2.1 Connection Using the D-SUB Cable (Analogue Type)

2.2.2 Connection Using the HDMI Cable

2.2.3 Connection Using an HDMI-DVI Cable

2.2.4 Connecting the Power

2.2.5 Driver Installation

2.2.6 Setting Optimum Resolution

2.2.7 Changing the Resolution Using a PC

Screen Setup

3.1 Brightness

3.1.1 Configuring Brightness

3.2 Contrast

3.2.1 Configuring Contrast

3.3 Sharpness

3.3.1 Configuring Sharpness

3.4 SAMSUNG MAGIC Bright

3.4.1 Configuring SAMSUNG MAGIC Bright

3.5 SAMSUNG MAGIC Angle

3.5.1 Configuring SAMSUNG MAGIC Angle

3.6 SAMSUNG MAGIC Upscale

3.6.1 Configuring SAMSUNG MAGIC Upscale

3.7 Image Size

3.7.1 Changing the Image Size

3.8 HDMI Black Level

3.8.1 Configuring the HDMI Black Level Settings

3.9 H-Position & V-Position

3.9.1 Configuring H-Position & V-Position

3.10 Coarse

3.10.1 Adjusting Coarse

3.11 Fine

3.11.1 Adjusting Fine

Configuring Tint

4.1 Red

4.1.1 Configuring Red

4.2 Green

4.2.1 Configuring Green

4.3 Blue

4.3.1 Configuring Blue

4.4 Color Tone

4.4.1 Configuring the Color Tone Settings

4.5 Gamma

4.5.1 Configuring Gamma

Coordinating OSD

5.1 Language

5.1.1 Configuring Language

5.2 Menu H-Position & Menu V-Position

5.2.1 Configuring Menu H-Position & Menu V-Position

5.3 Display Time