Samsung LS22B150NS-ZM User Manual

User manual

S19C150N S19C150F S20C150FL S20C150NL S22C150N S19C325N PLUS S19G325N PLUS S19H325N PLUS S19R325N PLUS S19V325N PLUS S20C325B PLUS S20G325B PLUS S20H325B PLUS S20R325B PLUS S20V325B PLUS

The color and the appearance may differ depending on

the product, and the specifications are subject to

change without prior notice to improve the performance.

BEFORE USING THE

PRODUCT

PREPARATIONS 23 Checking the Contents

11 Copyright

11 Icons used in this manual

12 Cleaning

13 Securing the Installation Space

13 Precautions for storage

14 Safety Precautions

14 Symbols for safety precautions

15 Electricity and Safety 16 Installation and Safety

18 Operation

22 Correct posture to use the product

23 Removing the Packaging 24 Checking the Components

25 Parts

25 Frontal Button (The functions available may vary

depending on the product model.)

27 Frontal Button (The functions available may vary

depending on the product model.)

29 Frontal Button (The functions available may vary

depending on the product model.)

31 Reverse Side

33 Installation

33 Attaching the Stand (S19C150N / S19C150F /

S20C150FL / S20C150NL / S22C150N / S19C325N PLUS / S19G325N PLUS / S19H325N PLUS / S19R325N PLUS / S20C325B PLUS / S20G325B PLUS / S20H325B PLUS / S20R325B PLUS)

34 Attaching the Stand (S19V325N PLUS /

S20V325B PLUS)

35 Removing the Stand

(S19C150N / S19C150F / S20C150FL / S20C150NL / S22C150N /

Table Of Contents

S19C325N PLUS / S19G325N PLUS / S19H325N PLUS / S19R325N PLUS / S20C325B PLUS / S20G325B PLUS / S20H325B PLUS / S20R325B PLUS)

36 Removing the Stand (S19V325N PLUS /

S20V325B PLUS)

37 Installing a Wall-mount Kit or Desktop Stand

(S19C150F / S20C150FL / S19C325N PLUS / S19G325N PLUS / S19H325N PLUS /

S19R325N PLUS / S19V325N PLUS) 38 Adjusting the Product Tilt

39 Anti-theft Lock

CONNECTING AND USING

A SOURCE DEVICE

SCREEN SETUP 50 Brightness

40 Before Connecting

40 Pre-connection Checkpoints

41 Connecting and Using a PC

41 Connection Using the D-SUB Cable (Analogue

Type) 42 Connection Using the DVI Cable

43 Connection Using an DVI-HDMI Cable

43 Connecting the Power

44 Driver Installation

45 Setting Optimum Resolution 46 Changing the Resolution Using a PC

50 Configuring Brightness

51 Contrast

51 Configuring Contrast

52 Sharpness

52 Configuring Sharpness

53 SAMSUNG MAGIC Bright

53 Configuring SAMSUNG MAGIC Bright

Table Of Contents

54 SAMSUNG MAGIC Upscale

54 Configuring SAMSUNG MAGIC Upscale

55 Image Size

55 Changing the Image Size

56 H-Position & V-Position

56 Configuring H-Position & V-Position

57 Coarse

57 Adjusting Coarse

58 Fine

58 Adjusting Fine

SCREEN SETUP 59 Brightness

59 Configuring Brightness

60 Contrast

60 Configuring Contrast

61 Sharpness

61 Configuring Sharpness

62 SAMSUNG MAGIC Bright

62 Configuring SAMSUNG MAGIC Bright

63 SAMSUNG MAGIC Angle

63 Configuring SAMSUNG MAGIC Angle

64 SAMSUNG MAGIC Upscale

64 Configuring SAMSUNG MAGIC Upscale

65 Image Size

65 Changing the Image Size

66 H-Position & V-Position

66 Configuring H-Position & V-Position

67 Coarse

67 Adjusting Coarse

Table Of Contents

68 Fine

68 Adjusting Fine

SCREEN SETUP 69 Brightness

69 Configuring Brightness

70 Contrast

70 Configuring Contrast

71 Sharpness

71 Configuring Sharpness

72 SAMSUNG MAGIC Bright

72 Configuring SAMSUNG MAGIC Bright

73 SAMSUNG MAGIC Angle

73 Configuring SAMSUNG MAGIC Angle

74 Coarse

74 Adjusting Coarse

75 Fine

75 Adjusting Fine

CONFIGURING TINT 76 Red

76 Configuring Red

77 Green

77 Configuring Green

78 Blue

78 Configuring Blue

79 Color Tone

79 Configuring the Color Tone Settings

80 Gamma

80 Configuring Gamma

CONFIGURING TINT 81 SAMSUNG MAGIC Color

81 Configuring SAMSUNG MAGIC Color

Table Of Contents

82 Red

82 Configuring Red

83 Green

83 Configuring Green

84 Blue

84 Configuring Blue

85 Color Tone

85 Configuring the Color Tone Settings

86 Gamma

86 Configuring Gamma

COORDINATING OSD 87 Language

87 Configuring Language

88 Menu H-Position & Menu V-Position

88 Configuring Menu H-Position & Menu V-

Position

89 Display Time

89 Configuring Display Time

90 Transparency

90 Changing Transparency

COORDINATING OSD 91 H-Position & V-Position

91 Configuring H-Position & V-Position

92 Image Size

92 Changing the Image Size

94 Menu H-Position & Menu V-Position

94 Configuring Menu H-Position & Menu V-

Position

SETUP AND RESET 95 Reset

95 Initializing Settings (Reset)

Table Of Contents

96 Eco Saving

96 Configuring Eco Saving

97 Off Timer

97 Configuring Off Timer

98 Turn Off After

98 Configuring Turn Off After

99 Key Repeat Time

99 Configuring Key Repeat Time

100 Customized Key

100 Configuring Customized Key

SETUP AND RESET 101 Reset

101 Initializing Settings (Reset)

102 Eco Saving

102 Configuring Eco Saving

103 Off Timer

103 Configuring Off Timer

104 Turn Off After

104 Configuring Turn Off After

105 Key Repeat Time

105 Configuring Key Repeat Time

106 Customized Key

106 Configuring Customized Key

SETUP AND RESET 107 Reset

107 Initializing Settings (Reset)

108 Language

108 Configuring Language

109 Eco Saving

109 Configuring Eco Saving

Table Of Contents

110 Off Timer On/Off

110 Configuring Off Timer On/Off

111 Off Timer Setting

111 Configuring Off Timer Setting

112 PC/AV Mode

112 Configuring PC/AV Mode

113 Key Repeat Time

113 Configuring Key Repeat Time

114 Customized Key

114 Configuring Customized Key

INFORMATION MENU AND

OTHERS

INSTALLING THE

SOFTWARE

115 Auto Source

115 Configuring Auto Source

116 Display Time

116 Configuring Display Time

117 Menu Transparency

117 Changing Menu Transparency

118 INFORMATION

118 Displaying INFORMATION

119 Configuring Brightness and Contrast in

the Initial Screen

120 MagicTune

120 What is "MagicTune"?

120 Installing the Software 121 Removing the Software

122 MultiScreen

122 Installing the Software

123 Removing the Software

Table Of Contents

TROUBLESHOOTING

GUIDE

SPECIFICATIONS 129 General (S19C150N / S22C150N)

124 Requirements Before Contacting

Samsung Customer Service Center

124 Testing the Product

124 Checking the Resolution and Frequency 124 Check the following.

127 Q & A

131 General (S19C150F / S20C150FL)

133 General (S20C150NL)

135 General (S19C325N PLUS / S19G325N

PLUS)

137 General (S19H325N PLUS / S19R325N

PLUS)

139 General (S19V325N PLUS / S20C325B

PLUS)

141 General (S20G325B PLUS / S20H325B

PLUS)

143 General (S20R325B PLUS / S20V325B

PLUS)

145 PowerSaver

146 Standard Signal Mode Table

APPENDIX 149 Contact SAMSUNG WORLD WIDE

155 Responsibility for the Pay Service (Cost

to Customers)

155 Not a product defect 155 A Product damage caused by customer's fault

155 Others

Table Of Contents

156 Correct Disposal

156 Correct Disposal of This Product (Waste

Electrical & Electronic Equipment)

157 Terminology

INDEX

Table Of Contents

Copyright

The contents of this manual are subject to change without notice to improve quality.

Samsung Electronics owns the copyright for this manual.

Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is

prohibited.

Microsoft and Windows are registered trademarks of Microsoft Corporation.

VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.

Before Using the Product

2013 Samsung Electronics

 An administration fee may be charged if either

 (a) an engineer is called out at your request and there is no defect in the product.

(i.e. where you have failed to read this user manual)

 (b) you bring the unit to a repair centre and there is no defect in the product.

(i.e. where you have failed to read this user manual)

 The amount of such administration charge will be advised to you before any work or home visit

is carried out.

Icons used in this manual

The following images are for reference only. Real-life situations may differ from what is shown in the images.

Before Using the Product

Cleaning

Before Using the Product

Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.

Take the following steps when cleaning.

1. Power off the monitor and computer.

2. Disconnect the power cord from the monitor.

Hold the power cable by the plug and do not touch the cable with wet

hands. Otherwise, an electric shock may result.

3. Wipe the monitor with a clean, soft and dry cloth.

 Do not apply a cleaning agent that contains alcohol,

solvent, or surfactant to the monitor.

 Do not spray water or detergent directly on the product.

4. Wet a soft and dry cloth in water and wring thoroughly to clean the exterior of the monitor.

5. Connect the power cord to the product after cleaning the product.

6. Power on the monitor and computer.

Before Using the Product

3.93 inches (10 cm)

3.93 inches(10 cm)

3.93 inches (10 cm)

Securing the Installation Space

Ensure some space around the product for ventilation. An internal temperature rise may cause fire and

damage the product. Be sure to allow the amount of space as shown below or greater when installing

the product.

The exterior may differ depending on the product.

Precautions for storage

Be sure to contact Samsung Customer Service Center (page 149) if the inside of the monitor needs

cleaning. (Service fee will be charged.)

Before Using the Product

Safety Precautions

Caution: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR

BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO

This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.

This symbol alerts you that important literature concerning operation and maintenance has been included with this product.

Caution

RISK OF ELECTRIC SHOCK DO NOT OPEN

QUALIFIED PERSONNEL.

Symbols for safety precautions

Warning

Caution

A serious or fatal injury may result if instructions are not followed.

Personal injury or damage to properties may result if instructions are not followed.

Activities marked by this symbol are prohibited.

Instructions marked by this symbol must be followed.

Before Using the Product

Electricity and Safety

The following images are for reference only. Real-life situations may differ from what is shown in the

images.

Warning

Do not use a damaged power cord or plug, or a loose power socket.

 An electric shock or fire may result.

Do not plug many products into the same power socket.

 Otherwise, the socket may overheat and cause a fire.

Do not touch the power plug with wet hands.

 Otherwise, an electric shock may result.

Insert the power plug all the way in so it is not loose.

 An unstable connection may cause a fire.

Connect the power plug to a grounded power socket (type 1 insulated devices only).

 An electric shock or injury may result.

Do not bend or pull the power cord with force. Do not weigh the power cord down with a heavy object.

 A damaged power cord may cause an electric shock or fire.

Do not place the power cord or product near heat sources.

 An electric shock or fire may result.

Remove foreign substances such as dust around the plug pins and power socket with a dry cloth.

 Otherwise, a fire may result.

Before Using the Product

Caution

Do not unplug the power cord when the product is in use.

 The product may become damaged by an electric shock.

Do not use the power cord for products other than authorized products supplied by Samsung.

 An electric shock or fire may result.

Keep the power socket where the power cord is connected unobstructed.

 If any problem occurs in the product, unplug the power cable to completely

cut the power to the product.

Power to the product cannot be completely cut off with the power button.

Hold the plug when disconnecting the power cord from the power socket.

 An electric shock or fire may result.

Installation and Safety

Warning

DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES.

 Otherwise, a fire may result.

Avoid installing the product in a narrow space with bad ventilation, such as a bookshelf or wall closet.

 Otherwise, a fire may result due to an increased internal temperature.

Keep the plastic packaging bag for the product in a place that cannot be reached by children.

 Children may suffocate.

Before Using the Product

Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.).

 The product may fall and break or cause a personal injury.

 Using the product in an area with excess vibration may damage the product

or cause a fire.

Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or smoke.

 An electric shock or fire may result.

Do not expose the product to direct sunlight, heat, or a hot object such as a stove.

 Otherwise, the product lifespan may be reduced, or a fire may result.

Caution

Do not install the product within the reach of young children.

 The product may fall and injure children.

Edible oil, such as soybean oil, can damage or deform the product. Do not install

the product in a kitchen or near a kitchen counter.

Take care not to drop the product when moving it.

 Otherwise, product failure or personal injury may result.

Do not set down the product on its front.

 The screen may become damaged.

When installing the product on a cabinet or shelf, make sure that the bottom edge of the front of the product is not protruding.

 The product may fall and break or cause a personal injury.

 Install the product only on cabinets or shelves of the right size.

Before Using the Product

SAMSUNG

Put down the product carefully.

 The product may fall and break or cause a personal injury.

Installing the product in an unusual place (a place exposed to a lot of fine particles, chemical substances or extreme temperatures, or an airport or train station where the product should operate continuously for an extended period of time) may seriously affect its performance.

 Be sure to consult Samsung Customer Service Center (page 149) before

installation if you want to install the product at such a place.

Operation

Warning

High voltage runs through the product. Do not attempt to disassemble, repair, or modify the product on your own.

 An electric shock or fire may result.

 Contact Samsung Customer Service Center (page 149) for repair.

Before moving the product, turn off the power switch and disconnect the power cable and all other connected cables.

 Otherwise, the power cord may be damaged and a fire or electric shock may

result.

If the product generates a strange noise, a burning smell, or smoke, remove the power cord immediately and contact Samsung Customer Service Center (page

149).

 An electric shock or fire may result.

Do not let children hang from the product or climb on top of it.

 The product may fall, and your child may become injured or seriously

harmed.

If the product falls or the exterior is damaged, power off the product, remove the power cord, and contact Samsung Customer Service Center (page 149).

 Otherwise, an electric shock or fire may result.

Do not put a heavy object, toy, or sweets on top of the product.

 The product or heavy objects may fall as children try to reach for the toy or

sweets resulting in a serious injury.

Before Using the Product

GAS

100

During a lightning or thunderstorm, power off the product and remove the power cable.

 An electric shock or fire may result.

Do not drop objects on the product or apply impact.

 An electric shock or fire may result.

Do not move the product by pulling the power cord or any cable.

 Otherwise, the power cable may be damaged and product failure, an electric

shock or fire may result.

If a gas leakage is found, do not touch the product or power plug. Also, ventilate the area immediately.

 Sparks can cause an explosion or fire.

Do not lift or move the product by the power cord or any cable.

 Otherwise, the power cable may be damaged and product failure, an electric

shock or fire may result.

Do not use or keep combustible spray or an inflammable substance near the product.

 An explosion or fire may result.

Ensure the vents are not blocked by tablecloths or curtains.

 Otherwise, a fire may result from an increased internal temperature.

Do not insert a metallic object (a chopstick, coin, hair pin, etc.) or inflammable object (paper, match, etc.) into the vent or ports of the product.

 If water or any foreign substance enters the product, be sure to power off the

product, remove the power cord, and contact Samsung Customer Service

Center (page 149).

 Product failure, an electric shock or fire may result.

Do not place objects containing liquid (vases, pots, bottles, etc) or metallic objects on top of the product.

 If water or any foreign substance enters the product, be sure to power off the

product, remove the power cord, and contact Samsung Customer Service

Center (page 149).

 Product failure, an electric shock or fire may result.

Before Using the Product

-_-

Caution

Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels.

 If you are not going to use the product for an extended period of time,

activate power-saving mode or a moving-picture screen saver.

Disconnect the power cord from the power socket if you do not plan on using the product for an extended period of time (vacation, etc).

 Otherwise, a fire may result from accumulated dust, overheating, an electric

shock, or electric leakage.

Use the product at the recommended resolution and frequency.

 Your eyesight may deteriorate.

Do not put DC power adapters together.

 Otherwise, a fire may result.

Remove the plastic bag from the DC power adapter before you use it.

 Otherwise, a fire may result.

Do not let water enter the DC power device or get the device wet.

 An electric shock or fire may result.

 Avoid using the product outdoors where it can be exposed to rain or snow.

 Be careful not to get the DC power adapter wet when you wash the floor.

Do not put the DC power adapter near to any heating apparatus.

 Otherwise, a fire may result.

Keep the DC power adapter in a well-ventilated area.

Looking at the screen too close for an extended period of time can deteriorate your eyesight.

Before Using the Product

Do not hold the monitor upside-down or move it by holding the stand.

 The product may fall and break or cause a personal injury.

Do not use humidifiers or stoves around the product.

 An electric shock or fire may result.

Rest your eyes for more than 5 minutes for every 1 hour of product use.

 Eye fatigue will be relieved.

Do not touch the screen when the product has been turned on for an extended period of time as it will become hot.

Store the small accessories used with the product out of reach of children.

Exercise caution when adjusting the product angle or stand height.

 Otherwise, children's fingers or hands may become stuck and injured.

 Tilting the product excessively may cause it to fall and result in personal

injury.

Do not place heavy objects on the product.

 Product failure or personal injure may result.

Before Using the Product

50 cm

Correct posture to use the product

Use the product in the correct posture as follows:

 Straighten your back.

 Allow a distance of 45 to 50 cm between your eye and the screen, and look slightly

downward at the screen.

Keep your eyes directly in front of the screen.

 Adjust the angle so light does not reflect on the screen.

 Keep your forearms perpendicular to your upper arms and level with the back of

your hands.

 Keep your elbows at about a right angle.

 Adjust the height of the product so you can keep your knees bent at 90 degrees or

more, your heels attached to the floor, and your arms lower than your heart.

Before Using the Product

Preparations

1.1 Checking the Contents

1.1.1 Removing the Packaging

1 Open the packaging box. Be careful not to damage the product when you open the packaging with

a sharp instrument.

2 Remove the styrofoam from the product.

3 Check the components and remove the styrofoam and plastic bag.

4 Store the box in a dry area so that it can be used when moving the product in the future.

This image is for reference only.

1 Preparations

Preparations

1.1.2 Checking the Components

 Contact the dealer from whom you purchased the product if any item is missing.

 The appearance of the components and items sold separately may differ from the image shown.

Components

Quick setup guide Warranty card

(Not available in some locations)

Power cable DC power adapter D-SUB cable (optional)

DVI cable (optional) Stand base Stand neck (optional)

Components may vary depending on the country.

User manual (optional)

1 Preparations

Preparations

MENU AUTO

Function Key Guide

SAMSUNG

MAGIC

BRIGHT

AUTO

SAMSUNG

MAGIC

BRIGHT

AUTO

SAMSUNG

MAGIC

SAMSUNG

MAGIC

1.2 Parts

1.2.1

Frontal Button (The functions available may vary depending on the

product model.)

The color and shape of parts may differ from what is shown.

Specifications are subject to change without notice to improve quality.

Icons Description

Open or close the onscreen display (OSD) menu, or return to the parent menu.

 OSD control lock: Maintain the current settings, or lock the OSD

control to prevent unintended changes to settings.

 Enable: To lock the OSD control, press and hold the [ ]

button for 10 seconds.

 Disable: To unlock the OSD control, press and hold the [ ]

button for more than 10 seconds.

If the OSD control is locked,

 Brightness, Contrast and Bright can be adjusted, and

INFORMATION

 The Customized Key function can be used by pressing

can be viewed.

the [ ] button. (The Customized Key is available even when the OSD control is locked.)

Configure Customized Key and press [ ]. The following options will be enabled.

Bright

- Eco Saving - Image Size

To configure Customized Key, go to SETUP & RESET

Customized Key

and select the mode you want.

→

1 Preparations

AUTO

Preparations

Icons Description

Function Key Guide

Move to the upper or lower menu or adjust the value for an option on the OSD menu.

Use this button to control the brightness and contrast of the screen.

Confirm a menu selection.

Press the [ ] button to automatically adjust the screen settings.

Changing the resolution in Display Properties will activate the

Auto Adjustment function.

Turn the screen on or off.

When a control button on the product is pressed, the Function Key Guide will be displayed before the onscreen menu opens. (The guide shows the function of the button pressed.)

To access the onscreen menu when the guide is displayed, press the corresponding button again.

The Function Key Guide may vary depending on the function or product model.

Refer to the actual product.

1 Preparations

MENU AUTO

Function Key Guide

SAMSUNG

MAGIC

ANGLE

AUTO

SAMSUNG

MAGIC

ANGLE

AUTO

SAMSUNG

MAGIC

SAMSUNG

MAGIC

SAMSUNG

MAGIC

Preparations

1.2.2

Frontal Button (The functions available may vary depending on the

product model.)

The color and shape of parts may differ from what is shown.

Specifications are subject to change without notice to improve quality.

Icons Description

Open or close the onscreen display (OSD) menu, or return to the parent menu.

 OSD control lock: Maintain the current settings, or lock the OSD

control to prevent unintended changes to settings.

 Enable: To lock the OSD control, press and hold the [ ]

button for 10 seconds.

 Disable: To unlock the OSD control, press and hold the [ ]

button for more than 10 seconds.

If the OSD control is locked,

 Brightness, Contrast and Angle can be adjusted, and

INFORMATION

 The Customized Key function can be used by pressing

can be viewed.

the [ ] button. (The Customized Key is available even when the OSD control is locked.)

Configure Customized Key and press [ ]. The following options will be enabled.

- Bright - Eco Saving - Image Size

Angle

To configure Customized Key, go to SETUP & RESET

Customized Key

and select the mode you want.

→

1 Preparations

AUTO

Preparations

Icons Description

Function Key Guide

Move to the upper or lower menu or adjust the value for an option on the OSD menu.

Use this button to control the brightness and contrast of the screen.

Confirm a menu selection.

Press the [ ] button to automatically adjust the screen settings.

Changing the resolution in Display Properties will activate the

Auto Adjustment function.

Turn the screen on or off.

When a control button on the product is pressed, the Function Key Guide will be displayed before the onscreen menu opens. (The guide shows the function of the button pressed.)

To access the onscreen menu when the guide is displayed, press the corresponding button again.

The Function Key Guide may vary depending on the function or product model.

Refer to the actual product.

1 Preparations

MENU AUTO

Function Key Guide

SAMSUNG

MAGIC ANGLE

AUTO

SAMSUNG

MAGIC

SAMSUNG

MAGIC

SAMSUNG

MAGIC

Preparations

1.2.3 Frontal Button (The functions available may vary depending on the

product model.)

The color and shape of parts may differ from what is shown.

Specifications are subject to change without notice to improve quality.

Icons Description

Open or close the onscreen display (OSD) menu, or return to the parent menu.

 OSD control lock: Maintain the current settings, or lock the OSD

control to prevent unintended changes to settings.

 Enable: To lock the OSD control, press and hold the [ ] button

for 10 seconds.

 Disable: To unlock the OSD control, press and hold the [ ]

button for more than 10 seconds.

If the OSD control is locked,

 Brightness, Contrast and Angle can be adjusted, and

INFORMATION

 The Customized Key function can be used by pressing

can be viewed.

the [ ] button. (The Customized Key is available even when the OSD control is locked.)

Configure Customized Key and press [ ]. The following options will

be enabled.

- Bright - Eco Saving - Image Size

Angle

To configure Customized Key, go to SETUP & RESET

Customized Key

and select the mode you want.

→

1 Preparations

AUTO

Preparations

Icons Description

Move to the upper or lower menu or adjust the value for an option on the OSD menu.

Use this button to control the brightness and contrast of the screen.

Confirm a menu selection.

Pressing the [ ] button when the OSD menu is not displayed will change the input source (Analog/DVI). If you power on the product or

change the input source by pressing the [ ] button, a message that shows the changed input source will appear at the top left corner of the screen.

Press the [ ] button to automatically adjust the screen settings.

 Changing the resolution in Display Properties will activate the

Auto Adjustment function.

Function Key Guide

 This function is only available in Analog mode.

Turn the screen on or off.

When a control button on the product is pressed, the Function Key Guide will be displayed before the onscreen menu opens. (The guide shows the function of the button pressed.)

To access the onscreen menu when the guide is displayed, press the corresponding button again.

The Function Key Guide may vary depending on the function or product model.

Refer to the actual product.

1 Preparations

+ 130 hidden pages