Samsung LP08CPLSS-XSG User Manual

|

T

Safety Symbols

|

Power | Installation

Safety Symbols

Make sure to follow the directions below to prevent accidents and damage to the product.

Failure to follow the accompanying directions may lead to serious injury or death.

Failure to follow the accompanying directions may lead to minor personal injury or property damage.

|

Using and

Cleaning

|

|

Safety Symbols

|

Power | Installation

Power

he images here are for reference only, and are not applicable in all cases (or countries).

Insert the power plug correctly until it is firmly in place.

z Failing to do so, may cause fire.

Do not use a damaged power plug, cord or outlet, as this may cause electric shock

or fire.

Do not touch the power plug with wet hands, as this may cause electric shock.

|

Using and

Cleaning

|

Do not connect more than one appliance to a single outlet, as an overheated outlet

may cause fire.

Do not use force to pull the power cord. Don't place anything heavy on the power

cord, as this may cause electric shock or fire.

Make sure to turn the power off and disconnect the power plug from the outlet

before moving the product. Make sure to disconnect the connection cables from

other devices as well.

z Moving the product without disconnecting the power cord may damage it while

moving, and may cause electric shock or fire.

Hold and pull out the plug by its body when disconnecting it from the outlet, as

pulling the plug out by the cord may cause it to be damaged.

z Failing to do so, may cause fire, or the product may not turn on normally.

Ensure that the power plug is disconnected before cleaning the product.

z Failing to do so, may cause electric shock or fire.

Keep the product away from places exposed to oil, smoke or moisture; do not

install inside a vehicle.

z This may cause a malfunction, electric shock or fire.
z In particular, avoid operating the monitor near water or outdoors where it could be

exposed to snow or rain.

Do not install the product near any heating appliance.

z There is a risk of fire.

Installation

|

Safety Symbols

When installing the product on a cabinet or shelf, do not let the front end of the

product project beyond its front edge.

Do not place the power cord near a heater, as the power cord may melt, causing

electric shock or fire.

Do not install the product in a car or a location exposed to oil, smoke, moisture,
water, or rainwater.

|

Power | Installation

z Failing to do so, may cause the product to fall, resulting in a product malfunction or

|

Using and

Cleaning

personal injury.

z Any contact of these materials with the product may cause electric shock or fire.

|

Disconnect the power plug when there is thunder or lightning.

z Failing to do so, may cause electric shock or fire.

Place the product down gently when installing it.

z Failing to do so may cause product damage or personal injury.

Avoid dropping the product when moving, as this may cause product damage or

personal injury.

Do not install the product in a location easily reached by children.

z As the product may fall and cause personal injury.

|

Safety Symbols

|

Power | Installation

Using and Cleaning

Do not insert any metal objects such as forks, wire, or gimlets, or flammable items

such as paper or matches into the ports at the back of the product, as this may
cause electric shock or fire.

z

If water or any foreign substance enters the product, make sure to turn the product
off disconnect the power plug from the outlet, and contact a service center.

Never disassemble, repair, or modify the product yourself.

z If you need to repair your product, contact a service center. An attempt at repairing

this product may cause electric shock or fire.

If you hear a strange sound, smell anything burning, or see smoke, disconnect the
power plug immediately and contact a service center.

|

Using and

Cleaning

|

z Failing to disconnect the power plug may cause electric shock or fire.

Always remove dust and water from the pins and connections of the power plug.

z Failing to do so may cause electric shock or fire.

When cleaning the product, first disconnect the power plug and clean it with a soft,
dry cloth.

z Do not use any chemicals such as benzene, alcohol, thinners, mosquito repellant,

aromatic, lubricant, detergent or wax.

When not using the product for a long time, make sure to disconnect the power plug.

z Heavy accumulated dust may cause electric shock or fire.

If the product needs to be installed in a location that doesn't satisfy general

conditions, make sure to contact one of our service engineers about the installation

as the product may encounter serious quality problems due to its environment.

z This refers to locations exposed to conditions such as heavy fine dust, chemicals, high or

low temperature, moisture, or when the product needs to be used continually without a
break over a long time.

If the product has been dropped or the product casing is damaged, turn it off and

disconnect the power plug.

z Using the product without verifying that it has not been damaged may cause electric

shock or fire. Please contact a service center.

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment) - Europe only

(Applicable in the European Union and other European countries with separate
collection systems)

This marking shown on the product or its literature, indicates that it should not be disposed
with other household waste at the end of its working life. To prevent possible harm to the
environment or damage to health from uncontrolled waste disposal, please separate this from
other types of waste and recycle it responsibly to promote the sustainable reuse of material
resources.

Household users should contact either the retailer where they purchased this product, or their
local government office, for details of where and how they can take this item for
environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the
purchase contract. This product should not be mixed with other commercial wastes for
disposal.

|

g

A

Features| Components

|

Front

Features

Expand the memory capacity with a memory card. Enjoy stored images immediately.

By connecting a CF or SD/MMC/MS memory card of your digital camera to your Digital Photo Frame, you can enjoy

es on your Digital Photo Frame quickly and easily. This also provides a way to expand the memory capacity of

the ima
your Digital Photo Frame.

Stylish design

With its sleek and clean, high class design, your Digital Photo Frame doubles as an ornament for your desk or table.

360 degree rotating stand allows both horizontal and vertical installations.

|

Back

|

Side

|

|

Features| Components

Please check that all components are contained in the delivered package.
If anything is omitted, contact the local distributor where the product was purchased. For optional items, contact a service center.
Never use a power adapter other than the adapter provided with the product.

|

Front

|

Back

|

Side

Components

Digital Photo Frame

Manual

|

Cables

Quick Start

Warranty

(Not available in all locations)

User Manual

Power cord

U.S.A. : 3903-000192

(Part No. are not applicable in all countries.)

|

Features| Components

Front

USB cable (A-B type)

(GK39-00013B)

|

Front

Power Adapter

(BN44-00133A)

|

Back

|

Side

|

Back

|

Features| Components

|

Front

|

Back

|

Side

|

T

A

Kensington lock

Power terminal

USB connection

terminal

Stand

Sliding Prevention

Holder

he Kensington lock is a device used to physically secure the system when using it in a
public place. (The locking device has to be purchased separately.)
For using a locking device, please contact where you purchased it.

Connect the power adapter to this jack.
Connect the power cord to the power terminal of the power adapter.

Connect a PC or an external device using a USB cable.

Up stream

terminal

Make sure to use the USB cable (A-mini B type) provided with the product when
connecting your digital photo frame to a PC through the up stream terminal.

stand allows both horizontal and vertical installation.
If your Digital Photo Frame is installed vertically, you can rotate your photos using the
rotation function to fit the vertical installation.

Supports the product so that it stays firmly in place on slippery surfaces.

|

Features| Components

Connect your Digital Photo Frame to a PC's USB terminal with a
USB cable. (Compatible with USB 2.0(device))

|

Front

|

Back

|

Side

|

Side

T

[] Power Button

Power Indicator Connect the power cord to the power terminal of the power adapter.

[MENU] Menu Button Displays the menu window at the bottom left corner of the screen.

[] Up Button

[] Left Button

[ ] Right Button

[ ] Down Button

[ENTER( )] Enter Button

[▶ll] Play / Pause Button

[BACK] Back Button Returns to the previous menu.

urns the product on or off.

Shows the power status. When the product is powered on, the power light turns
on.

Used for moving up.

Used for moving left.

Used for moving right.

Used for moving down.

Used for selection

Play / Pause during playback.

A

llows you to insert an optional memory card. (Only applicable for CF/SD/MMC/MS card)

Connect a PC or an external device using a USB cable.
Down stream terminal Connect your Digital Photo Frame to a USB-supported.

(Insert USB storage device)

Power

|

Power

|

USB

|

Memory Card

|

Connect the power adapter to the terminal at the back of the product.

Connect the power cord to the power adapter.

Plug the power cord for the product into a nearby outlet.

Press the button at the right of the product to turn the product on.

USB

|

Power

|

USB

|

Memory Card

|

Up Stream

Terminal

Down Stream

Terminal

Used to connect your digital photo frame to a PC.

When connecting your digital photo frame to a PC through the up stream terminal, make sure to use
the USB cable provided with the product.

Used to connect an external USB-supporting device to your digital photo frame.

If you connect your USB memory stick product to a USB hub or USB extension, it may not be
recognized. Therefore, make sure that the USB memory stick is inserted directly into the USB port.
When connecting an external device to the down stream terminal, use the USB cable provided with
the external device. (For more information on external devices and their cables, contact a relevant

service center.)

Samsung carries no liability for external device malfunctions caused by using any cable except the
standard cables specified for each device.
Some external products provide a cable that does not meet USB standards. Hence, they may cause a
malfunction.
If an external storage device does not work normally when connected to your digital photo frame, try
to connect it to your PC. If it still does not work normally when connected to your PC, contact a

service center for that external device or your PC.

Connect to the up stream terminal of your digital photo frame.

Connect the USB terminal of your PC.

Memory Card

|

Power

|

USB

|

Memory Card

|

CF/SD/MMC/MS CARD Slide the card in the direction marked on the top of the card.

When the power is turned on, the Photo menu screen appears automatically
and a slide show starts with the photos in the Frame Memory. If external
memory, such as a memory card or USB memory, is installed, it is selected
first and a slide show starts with the photos in its root directory. If there are
no photo files, a list of folders is displayed.

When turning on the power, a slide show starts with the photo files in the root directory of the installed external memory
device. If there are no photo files or no external memory device is installed, the Photo menu screen is displayed.

If there are no key operations for five (5) minutes, the current mode changes to Clock mode to protect the screen. But Slide
Show mode has no change. If you press the MENU button in Clock mode, a sub menu is displayed. Press the BACK button to
return to the main screen.

Buttons

Direct Functions

Button Description

MENU Opens the on-screen menu and exits from the menu.

∧,∨,＜,＞

ENTER Activates a highlighted menu item.

BACK Use this button to step one step back in the menu.

Photo

When a folder is selected

|

Buttons

These buttons allow you to adjust items in the menu.

|

Buttons

|

Photo

|

Photo

|

|

Clock

Clock

|

|

Settings

Settings

|

|

When pressing the MENU, on-screen menu is displayed on the screen.

When a file or folder name includes letters and numbers other than English, it may be displayed as '*'. This is neither an error
of the product nor of the file.

OSD : On Screen Display

OSD Description

When Thumbnail list is selected

When copying photos to the internal memory, the EXIF information (camera-related information) stored in the photo is

Slide Show

Open Open the folder.

Copy Copy the folder.

Delete Delete the folder.

When pressing the MENU, on-screen menu is displayed on the screen.

When a file or folder name includes letters and numbers other than English, it may be displayed as '*'. This is neither an error
of the product nor of the file.

OSD Description

Start Slide Show Start slideshow.

Copy / Copy All files Copy the file.

Delete / Delete All files Delete the file.

When copying photos from an external memory storage device (SD/MMC/MS, CF, USB memory) to the internal memory, the
size of each photo is automatically reduced to fit the size of the screen. Therefore only use the photos stored on the internal
memory with a digital photo frame.

removed and this may take a long time if a lot of files are copied at the same time.

When pressing the MENU, on-screen menu is displayed on the screen.
Only photos with a resolution of less than 8000 (width) * 8000 (height) pixels can be displayed on the screen.

Upper OSD

Start Slide Show Start slideshow

Slide Show Settings

Sub OSD Detail OSD

Description

Off , Fade, Shutter, Cross Comb, Mask, Brick,Dissolve, Bar, Expansion,

Slide Show Effect

Select an effect to give when displaying images on the screen.

Slide Show Speed Fast, Normal, Slow

Select a mode among Fast, Normal, and Slow.

Slide Show Repeat On, Off

Silk, Random

Brightness

Auto Rotation

Rotate

Zoom

Aspect Ratio

Direct Functions (Slide Show)

Button Status Description

> Pause slideshow Play the next file in the list. Show the information on the file

< Pause slideshow Play the previous file in the list. Show the information on the file.

MENU

[ ▶ ] Play slideshow.

[ ll ] Pause slideshow.

Select the Repeat for displaying images.

Slide Show Shuffle On, Off

Select whether to playback the files sequentially or in shuffle mode.

0~100

Adjust brightness from 0 to 100 levels.

On, Off

If a photo is to be displayed in portrait mode while your Digital Album is placed horizontally, it is
automatically displayed rotated and fit to the width.

Original, 90°, 180°, 270°

Select one among Original, 90°, 180°, and 270°.

Original, x1, x2, x4

Select this if you want to zoom into a photo. You can magnify it to the x2 or x4 size.
The x1 size is when the photo is set to Fit to Width.

Original, Fit To Width, Fit To Screen

Select an aspect ratio for images to display.

Show the information on the file
Pause slideshow. Play slideshow.

Play slideshow

Pause slideshow

Pause slideshow. Show the menu on the file.
Exit the menu. Play slideshow.

Clock

|

Buttons

When pressing the MENU, on-screen menu is displayed on the screen.

When a file or folder name includes letters and numbers other than English, it may be displayed as '*'. This is neither an error
of the product nor of the file.

Upper OSD

Time Format

Date Format

Date and Time

12 Hours, 24 Hours

Enter and set 12 Hours, 24 Hours.

YYYY/MM/DD, MM/DD/YYYY, DD/MM/YYYY

Select a Date Format.

set to 12 Hours
set to 24 Hours

Enter and set Month, Day, Year, Hour, Minute or am/pm. Whenever the power plug is disconnected, the
Date and Time information is lost. Therefore, you need to reset them each time.

|

Photo

Day, Month, Date, Year, Hour, Minute am/pm
Day, Month, Date, Year, Hour, Minute

|

Detail OSD

Description

Clock

|

Settings

|

On Timer

Off Timer

set to 12 Hours
set to 24 Hours

Your product will turn on at the specified time automatically.

set to 12 Hours
set to 24 Hours

Your product will turn off at the specified time automatically.

Activation, Hour, Minute, am/pm, Repeat
Activation, Hour, Minute, Repeat

Activation, Hour, Minute, am/pm, Repeat
Activation, Hour, Minute, Repeat

Settings

Upper OSD

Language

Auto Slide Show

Brightness

Firmware Update

System Information

Reset Settings

I want to update firmware.

|

Buttons

English, Deutsch, Español, Français, Italiano, Nederlands, Polski, Português, Русский, Svenska,
Türkçe, 简体中文, 繁體中文, 日本語, 한국어

Select a language to use for your product.

Off, On

If On is selected, a slide show starts automatically when your monitor is turned on.

0~100

Adjust brightness from 0 to 100 levels.

Update the product using an external memory(CF/SD/MMC/MS, USB).
Please visit www.samsung.com for the latest firmware update.

Model, Firmware Version

View the product information.

Yes, No

Reverts the product settings to factory defaults.

|

Photo

|

Detail OSD

Description

Clock

|

Settings

|

Preparations

Connect USB

memory card

to PC

Connect USB

Memory Card

to Digital

Photo Frame

Select Update

Digital Photo Frame

Firmware update file.

Please visit www.samsung.com for the latest firmware update.

USB memory card or external memory devices(CF/SD/MMC/MS)

If you are ready, connect the USB memory card to your PC.

Copy the firmware update file you downloaded to the USB memory card.

(Make sure to copy the firmware update file to the root directory.)

Remove the USB memory card from your PC, and connect it to your Digital Photo Frame.

If your Digital Photo Frame is off, turn it on.

Select Firmware Update of Settings.

Updating

The update progression is displayed on the screen.
When the update finishes, turn your Digital Photo Frame off, remove the USB memory card,
and turn your Digital Photo Frame on again, for maximum safety.

Do not remove the USB memory card during the update operation.
Do not press any key during the update operation.
Do not insert any other card during the update operation.
Do not turn your Digital Photo Frame off during the update operation.
You can identify whether the update operation has finished successfully or not by checking the
firmware version of your Digital Photo Frame is changed to the version of the firmware update.

The Digital Photo Frame not only allows you to appreciate photos but also provides an additional
Mini-Monitor function. The Mini-Monitor is a function for using the Digital Photo Frame as an
auxiliary monitor. Its usage is simple as the Digital Photo Frame connects to your PC via a USB cable.
This function allows you to work more efficiently at your PC by using an additional monitor. To use
your digital photo frame as a Mini-Monitor, first install the Frame Manager program. (However,
please note that you can use only one digital photo frame as a Mini-Monitor.)

Installing Frame Manager guide

Frame Manager User's Manual

Using your digital photo frame as a Mini-Monitor.

Using your digital photo frame as Mass Storage.
Changing the current mode to another mode
Adjusting the brightness
Updating the firmware

System Requirements

z OS : Windows XP SP2
z USB : Extended Host Controller (EHCT) for USB 2.0
z RAM : 256 MB or above

Caution

1. Windows XP Service Pack 2 must be installed.
It might not operate with any operating systems other than Windows XP SP2. We are not liable for problems that may
occur when installing it on an operating system other than Windows XP SP2.

2. We recommend a CPU speed of 2.4 GHz or higher.
Your digital photo frame might not operate normally if the performance specifications of your PC are lower than the
recommendations.

3. Make sure to install it correctly as directed in the Installation Guide.

4. Do not use your Mini-Monitor as a primary monitor.
We are not liable for any problems that may occur if you do not follow the directions. If it is used as a primary monitor,
the screen may be blank.

5. Make sure to use the provided USB cable.

6. When using your digital photo frame as a Mini-Monitor, all buttons except for the Power button will not operate.

7. Move the programs displayed and used on the Mini-Monitor to the primary monitor after you have finished using it.

8. The Mini-Monitor may not operate with some video cards. In this case, set the ‘Hardware acceleration’ value to ‘None’.

To set Hardware acceleration to None: Right-click on the Windows Desktop and select Properties from the displayed
menu. The Display Properties window appears. Click Settings > Advanced > Troubleshoot tab. Move the Hardware
acceleration slide to None.

T

|

Specifications

|

Supported Files

Specifications

Items Specifications

Model Name SPF-83H

Resolution 800 x 600

Panel

Interface RGB 6bit TTL

Supported Formats JPEG (Baseline, RGB)

Operating System

Built-in Memory 128 MB(FAT32)

USB One upstream (device 2.0) and one downstream (host 1.1)

Memory Card CF/SD/MMC/MS (FAT32)

ype 8" (20 cm) TFT

Windows 2000(SP2), Windows XP,
MAC OS X(10.x), Linx OS (2.6.x)

|

Rating External DC power adapter (12V, 2A, 24W)

Power

Consumption

Content Files Photo File Slide show Run / Slide Show Effect / Rotate / Thumbnail View

General

Weight 650 g / 1.4 lb

The product design may differ according to the model, and specifications are subject to change without prior
notice for product performance enhancement.

Class B Equipment (Information Communication equipment for residential use)

This product complies with the Electromagnetic Compatibility Directives for residential Use and can be

used in all areas including common residential areas. (Class B equipment radiates less electromagnetic

influences than class A equipment.)

Dimensions (WxHxD) 230.5 x 182.4 x 120 mm / 9.0 x 7.1 x 4.7 inch

Normal mode : under 12W, power saving mode : under 5W,
Power off mode : under 1W

Supported Files

Resolution : Less than 8000x8000

Supported image file format : JPEG (not supported Progressive JPEG and YUV 422 V format)

|

Specifications

|

Supported Files

|

T

g

T

T

Adj

T

A

T

|

Troubleshooting| Terminology

|

Service Centers

Troubleshooting

his section lists various problems and solutions encountered by users while using the digital photo frame. When encountering a problem,
first check the list below and follow the suggested action if one matches your problem. If the problem still persists, contact or visit the
nearest service center.

Symptoms Possible Causes and Suggested Actions

My Digital Photo Frame does not

turn on.

On Timer and Off Timer does not

work.

It takes some time to display an

e after the digital photo frame

ima

turns on.

he aspect ratio of the screen

looks abnormal.

he screen color is dimmed or too

strong.

I have connected an external

device (USB memory device), but

it does not work.

Check the power connection between the product and the power adapter.

If auto On Timer and Off Timer are set to the same time, they do not work.
Please check these times. If both the On Timer and Off Timer are set to the
same time, the Off Timer has priority and operates first.

Loading a file from an external memory card may take several seconds.
(This depends on the file format and size.)

Select one of the three values in the Photo>Aspect Ratio menu using the
buttons on the right side of the product.
(See Photo>Aspect Ratio)

ust the brightness in the Settings>Brightness menu using the buttons on
the right side of the product.
(See Settings>Brightness)

Check the cable connection between the product and the external device.
Check whether the external device works as a standalone, and check the
format of the files stored on it.
For this product, the USB host operates using USB 1.1 specifications and the
USB devices operate using USB 2.0 specifications.

|

Whenever I turn my Digital Photo
Frame off and on, I find the time
goes wrong.

menu is not displayed
immediately when I press the
menu button.

Photos are automatically displayed
as rotated.

he slide show does not start
automatically.

his product has no built-in battery. When the power turns off, the time info
disappears. Therefore, you need to reset the time whenever the Digital Photo
Frame is turned on.

Displaying the menu and other operations may take some time while the
product is loading an image to display on the screen.

Check if Auto Rotation is set to On.

Check if Auto Slide Show is set to Off.

I have connected a memory card,

g

A

g

g

but it does not work.

Check the file system on the memory card.

I have connected a USB memory
device, but it does not work.

File or folder names are not
displayed correctly.

Terminology

Terms Description

JPEG
(Joint Photographic
Coding Expert Group)

SD Card
(Secure Digital Card)

Check the type of the USB memory device. This product may not support the
compound USB device.

When a file or folder name includes letters and numbers other than English, it
may be displayed as '*'. If you need a file or folder name to be displayed
correctly, and not as '*', change it to English letters and numbers only.

|

Troubleshooting| Terminology

JPEG is an image compression technology. It provides the smallest loss of all
image compression technologies. It is used widely to transmit multimedia files
on the Internet and for other uses. An ima
is called a JPEG or JPG file. Usually, a JPEG file is created by taking a picture
with a digital camera, by drawing on a computer, or by a graphic package and
then by compressing the graphics image into the JPEG format.

n SD card is a Flash memory card the size of a postage stamp. It provides
high stability and high capacity. It is widely used in various digital products
such as PDAs, di
appearance is similar to that of MMC, but the number of pins and their
thickness is different. It also has a password setting function for data security.

ital cameras, MP3 players, cell phones, and notebook PCs. Its

e file formatted in the JPEG format

|

Service Centers

|

MMC
(Multi Media Card)

USB Cable

1) A-B TYPE

USB Cable

2) Cable for Connectin
Other Devices

MMC is external Flash memory used for small mobile devices, as in the case of
the SD card. Because it has smaller footprints than SD/MMC cards, it has
become widely accepted as the standard for memory cards. It is usually used
to save movies and photos.

Use the up stream terminal when connecting to a PC. This product supports
USB 2.0. An A-B type cable which is used to connect your digital photo frame
to a PC is provided with the product. The A type is the USB connector used to
connect to a PC. The B type is the USB connector used to connect to an
external device. You can connect your digital photo frame to a PC using an A-B
type USB cable.

Use this type of cable when using the down stream terminal. This product
supports USB 2.0. When connecting an external device to the down stream
terminal, use the USB cable provided with the external device.

|

Troubleshooting| Terminology

Service Centers

If you need a product service, contact or visit a Samsung service center.
For services for network connection and the Server.

Services Contacts

|

Service Centers

|

Samsung Electronics web site www.samsung.com

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG

customer care center.

North America

U.S.A 1-800-SAMSUNG (7267864) http://www.samsung.com/us

CANADA 1-800-SAMSUNG (7267864) http://www.samsung.com/ca

MEXICO 01-800-SAMSUNG (7267864) http://www.samsung.com/mx

Latin America

ARGENTINE 0800-333-3733 http://www.samsung.com/ar

BRAZIL

0800-124-421
4004-0000

http://www.samsung.com

CHILE 800-SAMSUNG(726-7864) http://www.samsung.com/cl

COLOMBIA 01-8000112112 http://www.samsung.com/co

COSTA RICA 0-800-507-7267 http://www.samsung.com/latin

ECUADOR 1-800-10-7267 http://www.samsung.com/latin

EL SALVADOR 800-6225 http://www.samsung.com/latin

GUATEMALA 1-800-299-0013 http://www.samsung.com/latin

HONDURAS 800-7919267 http://www.samsung.com/latin

JAMAICA 1-800-234-7267 http://www.samsung.com/latin

NICARAGUA 00-1800-5077267 http://www.samsung.com/latin

PANAMA 800-7267 http://www.samsung.com/latin

PUERTO RICO 1-800-682-3180 http://www.samsung.com/latin

REP. DOMINICA 1-800-751-2676 http://www.samsung.com/latin

TRINIDAD & TOBAGO 1-800-SAMSUNG(726-7864) http://www.samsung.com/latin

VENEZUELA 0-800-100-5303 http://www.samsung.com/latin

Europe

AUSTRIA 0800-SAMSUNG(726-7864) http://www.samsung.com/at

BELGIUM 02 201 2418 http://www.samsung.com/be

CZECH REPUBLIC 800-726-786 (800 - SAMSUNG) http://www.samsung.com/cz

DENMARK 70 70 19 70 http://www.samsung.com/dk

EIRE 0818 717 100 http://www.samsung.com/ie

FINLAND 030-6227 515 http://www.samsung.com/fi

FRANCE

GERMANY

3260 SAMSUNG (€ 0,15/Min)
08 25 08 65 65 (€ 0,15/Min)

01805 -SAMSUNG(726-7864)
(€ 0,14/Min)

http://www.samsung.com/fr

http://www.samsung.de

HUNGARY 06-80-SAMSUNG(726-7864) http://www.samsung.com/hu

ITALIA 800-SAMSUNG(726-7864) http://www.samsung.com/it

LUXEMBURG 02 261 03 710 http://www.samsung.com/lu

NETHERLANDS 0900-SAMSUNG (726-7864 € 0,10/Min) http://www.samsung.com/nl

NORWAY 815-56 480 http://www.samsung.com/no

POLAND

0 801 801 881
022-607-93-33

http://www.samsung.com/pl

PORTUGAL 80820-SAMSUNG(726-7864) http://www.samsung.com/pt

SLOVAKIA 0800-SAMSUNG (7267864) http://www.samsung.com/sk

SPAIN 902-1-SAMSU(72678) http://www.samsung.com/es

SWEDEN 0771-400 200 http://www.samsung.com/se

SWITZERLAND 0800-SAMSUNG(726-7864) http://www.samsung.com/ch

U.K 0845 SAMSUNG (7267864) http://www.samsung.com/uk

CIS

ESTONIA 800-7267 http://www.samsung.ee

LATVIA 8000-7267 http://www.samsung.com/lv

LITHUANIA 8-800-77777 http://www.samsung.lt

KAZAKHSTAN 8-10-800-500-55-500 http://www.samsung.kz

KYRGYZSTAN 00-800-500-55-500

RUSSIA 8-800-555-55-55 http://www.samsung.ru

TADJIKISTAN 8-10-800-500-55-500

UKRAINE 8-800-502-0000 http://www.samsung.ua

UZBEKISTAN 8-10-800-500-55-500 http://www.samsung.com/kz_ru

Asia Pacific

AUSTRALIA 1300 362 603 http://www.samsung.com/au

800-810-5858

CHINA

400-810-5858

http://www.samsung.com/cn

010-6475 1880

HONG KONG : 3698-4698 http://www.samsung.com/hk

3030 8282

INDIA

1800 110011

http://www.samsung.com/in

1-800-3000-8282

INDONESIA 0800-112-8888 http://www.samsung.com/id

JAPAN 0120-327-527 http://www.samsung.com/jp

MALAYSIA 1800-88-9999 http://www.samsung.com/my

NEW ZEALAND 0800 SAMSUNG (0800 726 786) http://www.samsung.com/nz

PHILIPPINES 1800-10-SAMSUNG(726-7864) http://www.samsung.com/ph

SINGAPORE 1800-SAMSUNG(726-7864) http://www.samsung.com/sg

THAILAND

1800-29-3232
02-689-3232

http://www.samsung.com/th

TAIWAN 0800-329-999 http://www.samsung.com/tw

VIETNAM 1 800 588 889 http://www.samsung.com/vn

Middle East & Africa

SOUTH AFRICA 0860-SAMSUNG(726-7864) http://www.samsung.com/za

TURKEY 444 77 11 http://www.samsung.com/tr

U.A.E 800-SAMSUNG (726-7864)

8000-4726

http://www.samsung.com/ae