Samsung LN52A650A1FXZA Owner’s Manual
Contact 8AM$UNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care center.
Contacte con SAMSUNG WORLDWIDE
Si tiene alguna pregunta o comentario referente a nuestros productos, por favor contacte con nuestro Servicio de Atenci6n al
Cliente.
Samsung Electronics Canada Inc., Customer
Service 55 Standish Court Mississauga,
CANADA 1-800-SAMSUNG(726-7864) www.samsung.com/ca
U.S.A 1-800-SAMSUNG(726-7864) www.samsung.com 105 Challenger Road
Ontario L5R 4B2 Canada
Samsung Electronique Canada Inc.,
Service a la Clientele 55 Standish Court
Mississauga, Ontario L5R 4B2 Canada
Samsung Electronics America, Inc.
Ridgefield Park, NJ 07660-0511
BNGS=01599A-02
imagine the possibilities
Thank you for purchasing this Samsung product
To receive more complete service, please register
your product at
www.samsung.com/global/register
Model Serial ",io.
important Warranty Regarding Viewing
Wide screenformatLCD Displays(16:9, theaspectratio of thescreenwidth to height)are primarilydesignedto view wide screenformat
full-motion video.Theimagesdisplayedon them should primarilybe inthewide screen 16:9ratio format,or expandedtofill the screenif
your modeloffers thisfeatureandthe images areconstantlymoving. Displayingstationarygraphics andimages on screen,such as the dark
sidebars on nonexpandedstandardformat televisionvideo andprogramming,should be limitedto no more than 5% ofthetotal television
viewing perweek.
Additionally,viewing otherstationary images andtext suchas stockmarket reports,video game displays, stationIogos,websites or computer
graphics and patterns, should belimitedas describedabovefor atttelevisions. Displayingstationary imagesthatexceed theabove guidelines
can causeuneven agingof LCDDisplaysthat leavesubtle, but permanentburned-inghost imagesin theLCD picture.Toavoidthis,vary the
programmingand images,and primarilydisplay fultscreenmoving images,not stationarypatterns or dark bars.
On LCD models thatofferpicture sizingfeatures,use thesecontrolsto viewdifferentformats asa futt screenpicture.
Becareful in theselection andduration oftelevisionformats used for viewing.Uneven LCDagingas a result of formatselectionand use,as
wetl as burned-in images,are notcovered by yourSamsunglimited warranty.
U.S.A Only
Theproduct unitaccompanyingthis user manual is licensed undercertainintellectual propertyrights ofcertainthird parties. In particular,
thisproduct is licensedunder thefollowing USpatents:5,991,715,5,740,317,4,972,484,5,214,678,5,323,396,5,539,829,5,606,618,
5,530,655,5,777,992,6,289,308,5,610,985,5,481,643,5,544,247,5,960,037,6,023,490,5,878,080,andunder USPublished Patent
Application No.2001-44713-A1.
Thislicenseis limited toprivate non-commercialuse byend-user consumersfor licensedcontents.No rights are grantedfor commercial
use.The licensedoes notcoverany productunit otherthanthis productunit andthe license does not extend to any unlicensedproduct unit
or processconforming to ISO/IEC 11172-3or ISO/IEC13818-3usedor sotd incombinationwith this productunit. The licenseontycovers
theuse ofthis product unitto encode and/or decodeaudio filesconformingto the ISO/IEC11172-3orISO/IEC 13818-3.Norights are
grantedunderthis license for product featuresor functionsthat donot conformto the ISO/IEC11172-3or ISO/IEC 13818-3.
Other countries
Theproduct unitaccompanyingthis user manual is licensed undercertainintellectual propertyrights ofcertainthird parties. This license is
limitedto privatenon-commercialuse byend-user consumersfor licensed contents.No rightsare grantedfor commercialuse.The license
doesnot coverany productunitother thanthis productunit andthe licensedoes not extend to anyunlicensed productunit or process
conformingto ISO/tEC 11172-3or ISO/IEC 13818-3used orsold in combinationwith this product unit.The licenseontycoversthe useof
thisproduct unitto encode and/or decode audiofiles conformingto the ISO/IEC11172-3orISO/IEC 13818-3.No rightsare grantedunder
thislicensefor productfeatures or functionsthat do notconformto the ISO/IEC11172-3or ISO/IEC 13818-3.
information Television Format
]
SAMSUNGELECTRONICSNORTHAMERICANLIMITEDWARRANTYSTATEMENT
Subject tothe requirements,conditions, exclusionsand limitationsof theoriginal LimitedWarrantysuppl_edwith SamsungElectronics
(SAMSUNG)products,and the requirements,conditions,exclusionsand limitationscontained herein. SAMSUNGwill additionally provide
Warranty RepairService in the UnitedStateson SAMSUNGproductspurchasedin Canada.and in Canadaon SAMSUNGproducts
purchasedin the UnitedStates.for thewarramyperiod originallyspecified,andto the OriginalPurchaseronly.
The abovedescribedwarranty repairsmust be performedby a SAMSUNGAuthorizedService Cemer.Along withthis Statement.the
Original LimitedWarranty Statementand adated Biltof Saleas Proof ofPurchasemust bepresentedto the ServiceCenter. Transportation
to andfrom the Service Centeristhe responsibilityofthe purchaser.
Condl[ionscoveredare limited onlyto manufacturingdefectsin material orworkmanship,and onlythose encoun[eredin normal useof the
product.
Excluded.but not limitedto. are anyoriginallyspecified provisionsfor. in-homeor on-site services,minimumor maximumrepairtimes,
exchangesor replacements,accessories,options, upgrades, or consumables.
Forthe location of a SAMSUNGAuthorized ServiceCenter,please calltoll-free:
In the United States : 1-800-SAMSUNG(t.800-726-7864) InCanada : 1-808-$AM$UNG
>- See the warranty card for more information on warranty terms.
PrecautionS when Displaying a StiH Image
A still image may cause peimanent damage to the TV screen
, Don0t display a Still image on the LCD panel for more than 2 hours as it can Cause Screen image retentionl This image
retention is a!so known as "screen burn'!: To avoid such image retention, reduce the degree of brightness and contrast of the
screen when displaying a Still imagel
Watching the LCD TV in 4.;3 format for a long period of time may leave traces of borders displayed On the !eft,
right and center of the screen caused by the difference of light emission on the screen.
P!aying a DVD or a game censo!e may cause a similar effect to the screen.
Dan' ages caused by the above effect are n0t covered bY the Warranty.
•Displaying still images from Video games and PC for longer than acertain period of time may produce partia !after-!mages _
To prevent this effect; reduce the tbrightnessl and !contrast _when displaying still images.
(D2008 Samsung Electronics Co., Ltd. All rights reserved.
Contents
= List of Features........................................................... 2 = Using YourTV as a Compu[er (PC) Display.................... 44
= Accessories .............................................................. 2 _ Display Modes ................................................................. 44
Viewing the Control Panel ............................................ 3 = Setting up the TV with your PC ....................................... 45
Viewing the Connection Panel ........................................... 4
Remote Con[rol ............................................................ 5
Installing Batteries in the Remote Control .........................
= Connecting Cable TV ................................................... 7 _ Selecting a Menu Language.......................................... 51
Connecting a DVD Player or Cable Box/ ,, Using the V-Chip..................................... 51
Satellite receiver (Set-Top Box) via HDMI.........................8 = Viewing Closed Captions (On-Screen Text Messages)
Connecting a DVD Player or Cable Box -Analog ....................................................................... 58
Satellite receiver (Set-Top Box) via DVI ............................8 = Viewing Closed Captions (On-Screen Text Messages)
Connecting a DVD Player or Cable Box - Digital ................................................................ 59
Satellite receiver (Set-Top Box) via Component cables ....9 w Adjusting the TV OnlOff Melody Sound....................... 60
Connecting a Camcorder......................................... 9 _ Setting the Entertainment moue .................................. 60
Connecting a VCR............................................ 10 = Using the Energy Saving Feature.................................... 61
Connecting a DigitalAudio Sys[em ................................. 11 = Upgrading the Software ................................................... 62
Connecting anAmplifier/DVD Home Theater ..................11
Connecting a PC ........................................................ 12
Turning the TV On and Off ..................................... 13 = Sorting Photo List ............................................................ 66
Plug & Play Feature.................................................... 13 = Viewing a Photo or Slide Show ...................................... 70
Changing Channels ..................................................... 15 a Using the Music List ................................................... 74
= Adjusting the Volume ....................................................... 15
= Viewing the Display ........................................................ 1(_
Viewing the Menus .......................................................... 16
Using the Remote Control Backiight Bunions .................16
= Using the TOOLS Button ................................................. 17
•, Memorizing the Channels ........................................... 17
To Selectthe Source ....................................................... t9
To Edit the input Source Name........................................ 19
Changing the Picture Standard .................................. 20
Customizing the Picture Settings .....................................2C
Adjusting the Detailed Settings ........................................21
Resetting the Picture Settings to the Factory Defaults ....24
Configuring Picture Options.............................................25
m Viewing Picture-in-Picture ............................................... 2£
Changing the Sound Standard ....................... 31
Customizing the Sound ........................................... 31
Setting the TruSurround XT ........................................ 32
Choosing Preferred Language .................................... 33
= Choosing a Multi-Channel Sounc (MTS_track ................33
Automatic Volume Control ............................................ 34
Setting the TV Speakers On/Off ................................. 34
Listening to the Sound of the Sub (PIP) Picture ..............35
Resetting the Sound Settings to the Factory Defaults.....35
Connecting Headphones (Said separately_ .................36
Vlanaging Channels......................................................... 36 = Specifications ................................................................ 104
Clearing Scrambled Channels - Digital............................42 = Dimensions ................................................................ 105
Fine TuningAnalog Channels .......................................... 42
= Checking the Digital-Signal Strength ...............................43 A [-_
Setting the Clock ............................................................. 47
Using the WlSELINK Function ........................................ 63
Using the Photo List ................................................... 64
Sorting Music List ............................................................ 75
Playing a Music File......................................................... 79
Using the Setup Menu ..................................................... 81
= Network Connection - Cable........................................... 82
Network Connection - Wireless ....................................... 84
Network selection ....................................................... 84
,, Cable Network Setup.................................................. 85
Wireless Network Setup .................................................. 87
Using InfoLink ........................................................ 90
InfoLink Setup................................................................ 93
What is Anynet*? ......................................................... 94
Connecting Anynet + Devices.....................................
Setting Up Anynet÷ ......................................................... 95
Scanning andSwitching betweenAnynet+ 3evices ........95
Recording .................................................................... 96
Listening through a Receiver _Home tl_ea_er)..................97
Troubleshooting for Anynet+ ....................................... 97
Troubleshooting ............................................................... 98
Installing the Stand ................................................ 100
Disconnecting the Stand................................................ 100
,, Auto Wall-Mount Adjustment (Soldseparately) ............101
Wall Mount Kit Specifications (VESA) ........................... 102
Using the Anti-Theft Kensington Lock (LN32A650A1F
LN40A650A1R LN46A650A1F _................................. 103
Symbol
Press Note One-Touch Button
General information
List of Features
• Adjustable picture settings that can be stored in the TV's memory.
• Automatic timer to turn the TV on and off.
• A special sleep timer.
• Excellent Digital Interface & Networking :
With a built-in HD digital tuner, non-subscription HD broadcasts can be viewed with no Cable Box/Satellite receiver
(Set-Top Box) needed.
• You can view News, Weather, and Stock information over the network (SAMSUNG's InfoLink Service).
• You can listen to music files and view pictures on USB Mass Storage Class (MSC) devices.
• HDMI/DVI connection of your PC to this TV.
• Excellent Picture Quality
- DNle technology provides life-like clear images.
• SRS TruSurround XT
- SRS TruSurround XT provides a virtual surround system.
Accessories
Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.
Remote Control & Batteries
(AAA x 2)
(BN59-00695A)
Power Cord Cleaning Cloth
(3903-000144) (BN63-01798A)
The items color and shape may vary depending on the model.
Ferrite Core (LN46AG60A1F Only)
The ferrite cores are used to shield the cables from interference. When
connecting a cable, open the ferrite core and clip it around the cable near
the plug.
Warranty Card / Registration Card /
Safety Guide Manual
(Not available in all locations)
Owner's Instructions
Cover-Bottom
(LN32A650A1 F: BN63-04294A)
(LN40A650A1 F: BN63-04243A)
(LN46A650A1 F: BN63-04288A)
(LN52A650A1 F: BN63-04330A)
Ferrite Core for Side-HDMI (HDMI4)
(LN46A650A1F Only: 3301-001305)
Viewing the Control Panel
Buttons on the Lower=Right Part of the Panel
The buttons on the lower-right panel control your TV's basic features, including the on-screen menu.
To use the more advanced features, you must use the remote control.
.......................................................................................................
SAMSUNG
Front Panel buttons
Touch each button to
>- The product color and shape may vary depending on the model, operate.
= ....................................................................................................... •
SOURCE
Toggles between all the available input sources
(TV, AVl, AV2, S-Video, Component1, Component2,
PC, HDMI1, HDMI2/DVI, HDMI3, HDMI4, USB). In the
on-screen menu, use this button as you would use the
ENTER C_ button on the remote control.
O MENU
Press to see an on-screen menu of your TV's features.
=VOL +
Press to increase or decrease the volume.
In the on-screen menu, use the - VOL + buttons as you
would use the _ and !_ buttons on the remote control.
O v OH/,,
Press to change channels.
In the on-screen menu, use the v CH ^ buttons as
you would use the T and A buttons on the remote
control.
O POWER INDICATOR
Blinks and turns off when the power is on and lights up
in stand-by mode.
O (_ (Power)
Press to turn the TV on and off.
O REMOTE CONTROL BENSOR
Aim the remote control towards this spot on the TV.
SPEAKERS
Viewing the Connection Panel
Use the connection panel jacks to connect A!V components that will be connected continuously, such as DVD players or a
VCR. For more information on connecting equipment, see pages 6~12.
.......................................................................................................
[TV Rear Panel] [=IVSide Panel
> The product color and shape may vary depending on the model.
O AUDIO OUT
Connects to the audio input jacks on your Amplifier/
Home theater.
O LAN
Connect a LAN cable to this port to connect to the
Network (SAMSUNG InfoLink's Service).
(See pages 82~84)
O PC IN [PC] / [AUDIO]
Connects to the video and audio output jacks on your PC, _)
O HDMI IN 1, 2, 3, 4 / DVl IN(HDMI2)[R=AUDIO-L]
Connects to the HDMI jack of a device with an HDMI
output.
- No sound connection is needed for an HDMI to HDMI
connection.
Use the HDMI IN 2 jack for DVI connection to an
external device. Use a DVI to HDMI cable or DVI-HDMI
adapter (DVI to HDMI) for video connection and the
DVI IN (HDMI2) [R-AUDIO-L] jacks for audio.
- When using an HDMI/DVI cable connection, you must
use the HDMI IN 2 jack.
DIGITAL AUDIO OUT (OPTICAL)
Connects to a Digital Audio component.
O ANT iN
Connects to an antenna or cable TV system.
O WISELINK
Connect a USB mass storage device to view photo files
and play audio files.
You can connect to the network wirelessly using the
Wireless Infolink adapter (Sold separately).
0 AVIN2
Video and audio inputs for external devices, such as a
camcorder or VCR.
S-VIDEO
Connects an S-Video signal from a camcorder or VCR.
O _-_ (HEADPHONE)
Connects a set of external headphones for private
listening.
POWER INPUT
Connects the supplied power cord.
COMPONENT IN 1, 2/AV IN 1
Connects Component video/audio.
The COMPONENT IN 1jack is also used as the
AV IN 1jack.
- Connect the video cable to the COMPONENT IN 1
[Y/VIDEO] jack and the audio cable to the
COMPONENT IN 1 JR-AUDIO-L] jacks.
EX-LINK
Connect this to the jack on the optional wall mount
bracket. This will allow you to adjust the TV viewing
angle using your remote control.
_)
KENSINGTON LOCK
(LN32A650AI F, LN40A660A1 F, LN46A650A1 F)
The Kensington Lock (optional) is a device used to
physically fix the system when used in a public place.
If you want to use a locking device, contact the dealer
where you purchased the TV.
> The location of the Kensington Lock may be different
depending on its model.
Remote Control
You can use the remote control up to a distance of about 23 feet from the TV.
O POWER
Turns the TV on and off.
O TV
Selects the TV mode directly.
O NUMERIC BUTTONS
Press to change the channel.
Press to select additional
channels (digital and analog)
being broadcast by the same
station. For example, to select
channel "54-3", press "54", then
press "_" and "3".
O _*(MUTE)
Press to temporarily cut off the
sound.
O VOL=/VOL+
Press to increase or decrease
the volume.
O OH LIST
Used to display Channel Lists
on the screen.
TOOLS
Use to quickly select frequently
used functions.
INFO
Press to display information on
the TV screen.
_) COLOR BUTTONS
Use these buttons in the
Channel list, WISELINK, etc.
CO
Controls the caption decoder.
E.MODE
Press to select the preset
display and sound modes for
sports, cinema and games.
_) Use these buttons in the
DMA, WlSELINK and Anynet +
modes.
(1_]: This remote can be
used to control recording on
Samsung recorders with the
Anynet + feature)
_) _ ON/OFF
Press to backlight the buttons
on the remote. This function is
convenient for using at night or
when the room is dark. (Using
the remote control with the
ON/OFF _ light button set
to On will reduce the battery
usage time.) (see page 16)
@ PRE=CH
Tunes to the previous channel.
CHv/CH^
Press to change channels.
6_ SOURCE
Press to display and select the
available video sources.
@
W, LINK (WISELINK)
This function enables you to
view and play photo and music
files from an external device.
(Refer to pages 64 (Photo)
and 74 (Music))
@
MENU
Displays the main on-screen
menu.
RETURN
Returns to the previous menu.
6)
UPA / DOWNT / LEFT4 /
RIGHT_ / ENTER
Press the Up/Down/Left/Right
sections of the wheel button
and Enter to select on-screen
menu items and change menu
values.
You can navigate up and down
the menu, switch channels and
adjust the volume by turning
the wheel button. (See pages
15-16)
EXIT
@
Press to exit the menu.
@
DMA (Digital Media Adapter)
Use this when connecting
a SAMSUNG DMA device
through an HDMI interface and
switching to DMA mode.
For more information on the
operating procedures, refer to
the user manual of the DMA.
This button is available when
"Anynet+(HDMI-CEC) '' is "On".
(see page 95)
INFO.L
@
Press to use the News, Stock
Market and Weather Forecast
information services available
over the network.
(see page 90)
@
FAV.CH
Press to switch to your favorite
channels.
RSIZE
Picture size selection.
POWER
TV ON/OFF
The performance of the remote control may be affected by bright light.
Installing Batteries in the Remote Control
t, Lift the cover at the back of the remote control upward as shown in the figure.
2. Install twoAAAsize batteries.
>- Make sure to match the "+" and "-" ends of the batteries with the diagram inside the
compartment.
3. Replace the cover.
>- Remove the batteries and store them in a cool, dry place ifyou won't be using the
remote control for a long time.
The remote control can be used up to about 23 feet from the TV.
(Assuming typical TV usage, the batteries should last for about one year.)
>- Using the remote control with the ON/OFF _ light button set to On will reduce the
battery usage time.
>- If the remote control doesn't work, check the following:
1. Is the TV power on?
2.Are the plus and minus ends of the batteries reversed?
3.Are the batteries drained?
4. Is there a power outage or is the power cord unplugged?
5. Is there a special fluorescent light or neon sign nearby?
Connections
Connecting VHF and UHF Antennas
If your antenna has a set of leads that look like the diagram to the right, see "Antennas
with 300 _ Flat Twin Leads" below.
If your antenna has one lead that looks like the diagram to the right, see "Antennas with
75 £_Round Leads".
If you have two antennas, see "Separate VHF and UHF Antennas".
Antennas with 300 Q Fiat Twin Leads
If you are using an off-air antenna (such as a roof antenna or "rabbit ears") that has 300
twin flat leads, follow the directions below.
1. Place the wires from the twin leads under the screws on a 300-75 _ adapter (not
supplied). Use a screwdriver to tighten the screws.
2. Plug the adaptor into the ANT IN terminal on the back of the TV.
Antennas with 75 Q Round Leads
1, Plug the antenna lead into the ANT IN terminal on the back of the TV.
Separate VHF and UHF Antennas
If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before
connecting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics
shops).
1. Connect both antenna leads to the combiner.
2. Plug the combiner into the ANT IN terminal on the bottom of the rear panel.
Connecting Cable TV
To connect to a cable TV system, follow the instructions below.
Cable without a Cable Box
1, Plug the incoming cable into the ANT iN terminal on the back of the TV.
>- Because this TV is cable-ready, you do not need a cable box to view
unscrambled cable channels.
Connecting to a Cable Box that Descrambles All Channels
1, Find the cable that is connected to the ANT OUT terminal on your cable box.
>- This terminal might be labeled "ANT OUT", "VHF OUT" or simply, "OUT".
2, Connect the other end of this cable to the ANT IN terminal on the back of the TV.
Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need
a two-way splitter, an RF (A!B) switch and four lengths of RF cable. (These items are available at most electronics stores.)
1, Find and disconnect the cable that is
your cable box. _ ANTIN
connected to the ANT IN terminal on _t _]_'l
>- This terminal might be labeled
"ANT IN", "VHF IN" or simply, "IN". --
2, Connect this cable to a two-way
splitter.
3,
Connect an RF cable between the
OUTPUT terminal on the splitter and
the IN terminal on the cable box.
4,
Connect an RF cable between the
Inconiing
cable
Incoming
cable
Splitter _
Splitter
Cable Box
J
ANT OUT terminal on the cable box
and the B-IN terminal on the RF(A/B)
switch.
SpliCer
5, Connect another cable between the
Switch
other OUT terminal on the splitter and
the A-IN terminal on the RF (A/B)
switch.
6, Connect the last RF cable between
the OUT terminal on the RF (A/B)
switch and the ANT IN terminal on the
rear of the TV.
Incoming
cable
cable Splitter L
S litter RF (NB)
i c,_ oL
Cable Box Switch
Cable Box Switch
_ ANT IN
RF(A/B)
After you have made this connection, set the A/B switch to the "A" position for normal viewing. Set the A/B switch to the "B"
position to view scrambled channels. (When you set the A/B switch to "B", you will need to tune your TV to the cable box's
output channel, which is usually channel 3 or 4.)
r
Connecting a DVD Player or Cable Box/Satellitereceiver (Set-Top Box) via HDMI
This connection can only be made if there isan HDMI Output connector on the external device.
1, Connect an HDMI Cable
between the HDMI IN
(1, 2, 3 or 4) jack on
the TV and the HDMI
jack on the DVD Player
or Cable Box/Satellite
receiver (Set-Top Box).
DVD Player or Cable Box/Satellite receiver
(Set-Top Box) Rear Panel
_i "HDMi Cable (Not supplied}
TV Rear Panel
>- What is HDMI?
• HDMl(High-Definition Multimedia interface), is an interface that enables the
transmission of digital audio and video signals using a single cable.
• The difference between HDMI and DVI is that the HDMI device is smaller in size and
has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed.
>- Each DVD Player or Cable Box/Satellite receiver (Set-Top Box) has a different back
panel configuration.
>- The TV may not output sound and pictures may be displayed with abnormal color when
DVD players/Cable Boxes/Satellite receivers supporting HDMI versions older than 1.3
are connected. When connecting an older HDMI cable and there is no sound, connect
the HDMI cable to the HDMI IN 2 jack and the audio cables to the DVI IN (HDMI2)
[R-AUDIO-L] jacks on the back of the TV. If this happens, contact the company that
provided the DVD player/Cable Box/Satellite receiver to confirm the HDMI version, then
request an upgrade.
>- HDMI cables that are not 1.3 may cause annoying flicker or no screen display.
TV Side Panel
Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via DVl
This connection can only be made if there isa DVI Output connector on the external device.
1, Connect a DVl to HDMI
Cable or DVI-HDMI
Adapter between the
HDMI IN 2 jack on the
TV and the DVI jack DVD PlayerorCable Box/
on the DVD Player or Satellite receiver (Set-TopBox)
Cable Box/Satellite
receiver (Set-Top Box).
2, Connect Audio Cables
between the DVI IN
(HDMI 2)[R-AUDIO-L]
jack on the TV and the
DVD Player or Cable
Box/Satellite receiver
(Set-Top Box).
>- Each DVD Player or Cable Box/Satellite receiver (Set-Top Box) has a different back
panel configuration.
>- When connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box), match
the color of the connection terminal to the cable.
When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.
TV Rear Panel
ConnectingaOVOPlayerorCableBo×lSatellitereceiver(Set=TopBox)viaComponentcables
The rear panel jacks on your TV make it easy to connect a DVD Player or Cable Box/Satellite receiver (Set-Top Box) to your TV.
1, Connect a Component
Cable between the
COMPONENT IN
(1 or 2) [Y, PB, PR]
jacks on the TV and the
COMPONENT
[V,PB, PR]jacks on the
DVD Player or Cable
Box/Satellite receiver
(Set-Top Box).
2. Connect Audio
Cables between the
COMPONENT IN(1 or
2) [R-AUDIO-L] jacks on
the TV and the AUDIO
OUT jacks on the
DVD Player or Cable
Box/Satellite receiver
(Set-Top Box).
DVD Player or Cable Box /
Satellite receiver (Set-Top Box)
Component video separates the video into Y (Luminance (brightness)), Pb (Blue) and
Pr (Red) for enhanced video quality.
Be sure to match the component video and audio connections.
For example, if connecting a Component video cable to COMPONENT IN 1, connect
the audio cable to COMPONENT IN 1 also.
>- Each DVD Player or Cable Box/Satellite receiver (Set-Top Box) has a different back
panel configuration.
>- When connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box), match
the color of the connection terminal to the cable.
TV Rear Panel
Connecting a Camcorder
The side panel jacks on your TV make it easy to connect a camcorder to your TV.
They allow you to view the camcorder tapes without using a VCR.
1. Connect a Video Cable
(or S-Video Cable)
between the AV IN 2
[VIDEO] (or S-VIDEO)
jack on the TV and the
VIDEO OUT jack on the
camcorder.
2=
Connect Audio Cables
between the AV IN 2
[R-AUDIO-L] jacks on
the TV and the AUDIO
OUT jacks on the
camcorder.
Camsorder
Audio Cable
(Not supplied)
>- Each Camcorder has a different back panel configuration.
>- When connecting a Camcorder, match the color of the connection terminal to the cable.
TV Side Panel
Connecting a VCR
Video Connection
These instructionsassume that you have already connected your TV to an antenna or a cable TV system (according to the
instructions on pages 6~7). Skip step 1 if you have not yet connected to an antenna or a cable system.
1, Unplug the cable or
antenna from the back
of the TV.
2= Connect the cable or
antenna to the ANT IN
terminal on the back of
the VCR.
3, Connect an RF Cable
between the ANT OUT
terminal on the VCR
and the ANT IN terminal
on the TV.
4, Connect a Video Cable
between the VIDEO
OUT jack on the
VCR and the AV IN 1
[Y/VIDEO] orAV IN 2
[VIDEO] jack on the TV.
5. Connect Audio Cables
between the AUDIO
OUT jacks on the VCR
and theAV IN 1 (orAV
IN 2) [R-AUDIO-L] jacks
on the TV.
If you have a "mono"
(non-stereo) VCR,
use a Y-connector
(not supplied) to
connect to the right
and left audio input
jacks of the TV.
Alternatively, connect
the cable to the "R"
jack, If your VCR
is stereo, you must
connect two cables.
8-Video Connection
TV Rear Panel
VCR Rear Panel
S\
_ ;_; Audio Cable (Not supplied)
_4:" Video Cable (Not supplied)
!_i! RF Cable (Not supplied)
Follow the instructions in "Viewing a VCR or Camcorder Tape" to view your VCR tape.
>- Each VCR has a different back panel configuration.
>- When connecting a VCR, match the color of the connection terminal to the cable.
>- When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not
match the color of the video cable (Yellow).
TV Side Panel
Your Samsung TV can be connected to an S-Video jack on a VCR. (This connection delivers a better picture as compared
to a standard VCR.)
1. To begin, follow steps
1-3 in the previous
section to connect the
antenna or cable to your
VCR Rear Panel
TV Rear Panel
TV Side Panel
VCR and your TV.
2. Connect an S-Video
Cable between the
S-VIDEO OUT jack on
the VCR and the
AV IN 2 IS-VIDEO] jack
on the TV.
3. Connect Audio Cables
between the AUDIO
OUT jacks on the VCR
and theAV IN 2
[R-AUDIO-L] jacks on
the TV.
An S-Video cable may be included with a VCR. (If not, check your local electronics store.)
>- Each VCR has a different back panel configuration.
>- When connecting a VCR, match the color of the connection terminal to the cable.
Connecting a Digital Audio System
The rear panel jacks on your TV make iteasy to connect a Digital Audio System (Home theater/Receiver) to your TV.
1,
Connect an Optical Cable
between the "DIGITAL AUDIO
OUT (OPTICAL)" jacks on
the TV and the Digital Audio
Input jacks on the Digital Audio
System.
When a Digital Audio System
is connected to the "DIGITAL
AUDIO OUT (OPTICAL)" jack:
Decrease the volume of the
TV and adjust the volume
level with the system's volume
control.
Digital Audio System TV Rear Panel
5.1CH audio is possible when the TV is connected to an external device
supporting 5.1CH.
Each Digital Audio System has a different back panel configuration.
When the receiver (home theater) is set to On, you can hear sound output from
the TV's Optical jack. When the TV is displaying a DTV(air) signal, the TV will
send out 5.1 channel sound to the Home theater receiver. When the source is a
digital component such as a DVD and is connected to the TV via HDMI, only 2
channel sound will be heard from the Home Theater receiver. If you want to hear
5.1 channel audio, connect the DIGITALAUDIO OUT (OPTICAL) jack on the
DVD player or Cable/Satellite Box directly to an Amplifier or Home Theater, not
the TV.
Connecting an Amplifier/DVD Home Theater
1, Connect Audio Cables
between the AUDIO OUT
[R-AUDIO-L] jacks on the TV
and AUDIO IN JR-AUDIO-L]
jacks on the Amplifier/DVD
Home Theater.
When an audio amplifier is
connected to the "AUDIO OUT
[R-AUDIO-L]" jacks: Decrease
the volume of the TV and
adjust the volume level with
the Amplifier's volume control.
Amplifier/DVD Home Theater
Audio Cable (Not supplied)
>- Each Amplifier/DVD Home Theater has a different back panel configuration.
>- When connecting an Amplifier/DVD Home Theater, match the color of the
connection terminal to the cable.
TV Rear Panel
Connecting a PC
Using the D-Sub Cable
1, Connect a D-Sub Cable
between PC IN [PC] connector
on the TV and the PC output
connector on your computer.
2. Connect a PCAudio Cable
between the PC IN [AUDIO]
jack on the TV and the Audio
Out jack of the sound card on
your computer.
Using the HDMI/DVI Cable
1=
Connect an HDMI/DVI cable
between the HDMI IN2 jack
on the TV and the PC output
jack on your computer.
2=
Connect a 3.5 mm Stereo mini-
plug/2RCA Cable between the
DVI IN(HDMI2)JR-AUDIO-L]
jack on the TV and the Audio
Out jack of the sound card on
your computer.
TV Rear Panel
"iV Rear Panel
li!_ii HDMt/DVI Cable (Not supplied)
>- Each PC has a different back panel configuration.
>- When connecting a PC, match the color of the connection terminal to the cable.
>- When using an HDMI/DVl cable connection, you must use the HDMI IN 2
terminal.
Operation
Turning the TV On and Off
Press the POWER(b button on the remote control.
You can also use the POWER_ button on the TV.
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
1= Press the POWER button on the remote control.
The message "Menu Language, Store Demo, Channels and Time will be
set." is displayed.
Press the ENTER I:_ button, then "Select language of the OSD." menu
is automatically displayed. Press the ENTER _ button.
2=
Press the ,i, or • button to select language, then press the ENTER C*_
button.
The message "Select 'Home Use' when installing this TV in your home." is
displayed.
POWER
TV
|
ON/OFF
3=
Press the _1or !_ button to select "Store Demo" or "Home Use", then
press the ENTER _ button. The message "Select the Antenna source to
memorize." is displayed.
:_ We recommend setting the TV to "Home Use" mode for the best picture in
your home environment.
"Store Demo" mode is only intended for use in retail environments.
If the unit is accidentally set to "Store Demo" mode and you want to return
to "Home Use" (Standard): Press the Volume button on the TV. When the
volume OSD is displayed, press and hold the MENU button on the TV for
5 seconds.
4= Press the A or _' button to memorize the channels of the selected
connection. Press the ENTER _ button to select "Start".
Air: "Air" antenna signal.
Cable: "Cable" antenna signal.
Auto: "Air" and "Cable" antenna signals.
In Cable mode, you can select the correct signal source among STD,
HRC, and IRC by pressing the A, T, 4 or I_ button, then press the
ENTER _ button. If you have Digital cable, select the cable system
signal source for both Analog and Digital. Contact your local cable
company to identify the type of cable system that exists in your particular
area.
5_
The TV will begin memorizing all of the available channels.
>- Tostop the search before it has finished, press the ENTER _ button with
"Stop" selected.
After all the available channels are stored, it starts to remove scrambled
channels (see page 42). And then, the Auto program menu reappears. Press
the ENTER _ button when channel memorization is complete. The message
"Set the Clock Mode." is displayed.
6. Press the ENTER _ button.
Press the A or _' button to select "Auto", then Press the ENTER _ button.
The message "Set to daylight saving time." is displayed.
If you select "Manual", "Set current date and time" is displayed.
(See page 47)
7. Press the A or V button to select "Off" or "On", then press the ENTER
button. The message "Select the time zone in which you live." is displayed.
8. Press the A or V button to highlight the time zone for your local area. Press
the ENTER C,-_button. Ifyou have received a digital signal, the time will be
set automatically. If not, see page 47 to set the clock.
9. The message "Enjoy your watching." is displayed.
When you have finished, press the ENTER c:_ button.
If you want to reset thi_ feature...
1. Press the MENU button to display the menu.
Press the A.or V button to select "Setup", then press the ENTER _ button.
2. Press the ENTER _ button again to select "Plug & Play".
For further details on setting up options, refer to the pages 13~14.
:_ The "Plug & Play" feature is only available in the TV mode.
Changing Channels
Using the Channel Buttons
1=
Press the OHv or OH ^ button to change channels.
When you press the OH v or OH ^ button, the TV changes channels in
sequence.
You will see all the channels that the TV has memorized. (The TV must
have memorized at least three channels). You will not see channels that
were either erased or not memorized. See page 18to memorize channels. _
To increase the channel number, turn the wheel clockwise when the
Channel Display is displayed. To decrease the channel number, turn the
wheel counterclockwise.
Using the Number Buttons
1, Press the number buttons to go directly to a channel. For example, to select
channel 27, press 2, then 7.
> For quick channel change, press the number buttons, then press the
ENTER _ button.
Using the _ Button
The _ button is used to select stations that broadcast a digital signal.
1, For example, for Channel 7-1, press 7, then _, then 1.
HD indicates the TV is receiving a Digital High Definition signal.
SD indicates the TV is receiving a Standard Definition signal.
For quick channel change, press the number buttons, then press the
ENTER _ button.
I
Using the PRE=CH Button to select the Previous Channel
1, Press the PRE-OH button. The TV will switch to the last channel viewed.
> To quickly switch between two channels that are far apart, tune to one
channel, then use the number button to select the second channel.
Then use the PRE-OH button to quickly alternate between them.
Adjusting the Volume
Using the Volume Button
1, Press the VOL = or VOL+ button to increase or decrease the volume.
To turn the volume up, turn the wheel clockwise when the Volume
Control window is displayed. To turn the volume down, turn the wheel
counterclockwise.
Using the MUTE button
At any time, you can cut off the sound using the MUTE button.
1, Press MUTE button and the sound cuts off.
"_" is displayed on the screen.
2, To turn mute off, press the MUTE button again or simply press the
VOL = or VOL+ button.
Viewing the Display
The display identifies the current channel and the status of certain audio-video
settings.
1. Press the INFO button on the remote control.
The TV will display the channel, the type of sound, and the status of certain
picture and sound settings.
>- Press the INFO button once more or wait approximately 10 seconds and
the display disappears automatically.
Viewing the Menus
t=
With the power on, press the MENU button.
The main menu appears on the screen.
The menu's left side has icons: Picture, Sound, Channel, Setup, Input,
Application.
2= Press the _, or • button to select one of the icons.
Then press the ENTER _ button to access the icon's sub-menu.
>- Tomove to a lower menu, turn the wheel clockwise when the menu Display
is displayed. To move to a higher menu, turn the wheel counterclockwise.
3= Press the EXIT button to exit.
>- The on-screen menus disappear from the screen after about one minute.
r............
i
i
i
i
i
i
i
i
i
i
i
i
i
i
i
Using the Remote Control Backlight Buttons
Use this feature in dark surroundings and when you are unable to see the remote control buttons clearly.
1. Press the ON/OFF _ light button.
Pressing the ON/OFF _ light button toggles between ON and OFF.
When ON, the button backlight is turned on for a moment.
Pressing a remote control button when the remote control is on turns the button backlight on for a moment. If
you touch or move the remote control and the motion is detected by the sensor of the remote control, the button
backlight will be turned on for a moment.
The remote contains two small movement sensors that control the backlight function. If you shake or drop the
remote, you may hear the sensors rattle. This is normal and is not a defect.
The button backlight will not be turned on when the remote control is turned off.
Using the TOOLS Button
You can use the TOOLS button to select your frequently used functions quickly and easily. The "TOOLS" menu changes
depending on which external input mode you are viewing.
2. Press the _, or T" button to select a menu.
1. Press the TOOLS button. The "TOOLS" menu will appear. _ _4.s___ _
3. Press the A/_'/,_/!_/ENTER _ buttons to display, change, or use the selected
items. For a more detailed description of each function, refer to the corresponding
page.
- Device List: see page 95
- Multi-Track Sound: see pages 33
- Picture Mode: see page 20
• Sound Mode: see page 31
- Sleep Timer: see page 49
- Add to Favorite: see page 38
• Switch to Cable (or Switch toAir): see page 17
- PIP: see page 30
Auto adjustment: see page 45
Memorizing the Channels
Your TV can memorize and store all of the available channels for both "off-air" (Air) and "Cable" channels. After the available
channels are memorized, use the CH v or CH/,, button to scan through the channels. This eliminates the need to change
channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source,
memorizing the channels (automatic) and adding or deleting channels (Channel Lists).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must
specify the type of signal source that is connected to the TV (i.e. an Air or a Cable
system).
1. Press the MENU button to display the menu.
Press the A or • button to select "Channel", then press the ENTER
button.
2= Press the ENTER _ button to select "Antenna".
Press the A or T button to select "Air" or "Cable", then press the ENTER C;*J
button.
Press the EXIT button to exit.
Easy Setting
1. Press the TOOLS button on the remote control.
2. Press the A or T button to select "Switch to Cable (or Switch to Air)".
3. Press the ENTER _ button to switch "Cable" (or "Air").
Storing Channels in Memory (Automatic Method)
1, Press the MENU button to display the menu.
Press the A or • button to select "Channel", then press the ENTER
button.
2, Press the A or T button to select "Auto Program", then press the ENTER
button.
3=
Press the A or T button to select the antenna connection, then press the
ENTER _ button.
Air: "Air" antenna signal.
Cable: "Cable" antenna signal.
Auto: "Air" and "Cable" antenna signals.
4=
When selecting the Cable TV system:
Press the ENTER _ button to start the auto program.
Press the A, V', _1or I_ to select the correct analog signal cable system
source among "STD", "HRC", and "IRC". Press the A or T button to select
"Start", then press the ENTER _ button. If you have Digital cable TV, select
the cable system signal source for both Analog and Digital.
>- STD, HRC and IRC identify various types of cable TV systems. Contact
your local cable company to identify the type of cable system that exists in
your particular area. At this point the signal source has been selected.
5=
The TV begins memorizing all available stations.
After all the available channels are stored, it starts to remove scrambled
channels (see page 42). The Auto program menu then reappears.
If you want to stop Auto Programming, press the ENTER _ button.
The "Stop Auto Program?" message will be displayed. Select "Yes"by
pressing the _1or _ button, then press the ENTER _ button.
Press the EXIT button to exit.
To Select the Source
Use to select TV or other external input sources such as DVD players or Cable
Box/Satellite receivers (Set-Top Box) connected to the TV. Use to select the input
source of your choice.
1. Press the MENU button to display the menu.
Press the A.or • button to select "Input", then press the ENTER _ button.
2. Press the ENTER _ button to select "Source List".
Press the ,i, or T button to select signal source, then press the ENTER
button.
>- Available signal sources: TV, AV1, AV2, S-Video, Component1,
Component2, PC, HDMI1, HDMI2/DVl, HDMI3, HDMI4, USB.
>- You can choose only those external devices that are connected to the TV.
In the "Source List", connected inputs will be highlighted and sorted to the
top. Inputs that are not connected will be sorted to the bottom.
>- Using the Color buttons on the remote with the Source list
• Red {Refresh); RefreSheS the €onnecting extema! devices I
. TOOLS (Option): Displays the "Edit Name '_and _'lnformation" menus.
(_ Press the SOURCE button on the remote control to view an external signal
source.
To Edit the input Source Name
Name the device connected to the input jacks to make your input source selection easier.
1. Press the MENU button to display the menu.
Press the A or _' button to select "Input", then press the ENTER _ button.
Press the A or T button to select "Edit Name", then press the ENTER
button.
2, Press the A.or T button to select "AVI", "AV2", "S-Video", "Component1",
"Component2", "PC", "HDMII", "HDMI2/DVI", "HDMI3", "HDMI4" input jack,
then press the ENTER _ button.
3=
Press the A or T button to select "VCR", "DVD", "Cable STB",
"Satellite STB", "PVR STB", "AV Receiver", "Game", "Camcorder", "PC",
"TV", "IPTV", "Blu-Ray', "HD DVD", "Digital Media Adapter" input source, then
press the ENTER _ button.
Press the EXIT button to exit.
>- When a PC with a resolution of 1920 x 1080@60Hz is connected to the
HDMI IN 2 port, you should set the "HDMI2/DVI" mode to "PC" in the "Edit
Name" of the "Input" mode.
Picture Control
Changing the Picture Standard
You can select the type of picture which best corresponds to your viewing
requirements.
1. Press the MENU button to display the menu.
Press the ENTER I:_ button to select "Picture".
2= Press the ENTER 1:_ button to select "Mode". Press the A or 'V button to
select "Dynamic", "Standard" or "Movie". Press the ENTER _ button.
* Dynami¢i selects the picture for high'definition in a biight r0Oml
, standard: Selects the picture for the optimum display in a normal
environment.
Movie: Selects the picture for viewing movies in a dark room.
3, Press the EXIT button to exit.
Easy Setting
1, Press the TOOLS button on the remote control.
2, Press the A or T button to select "Picture Mode".
3, Press the 4 or I_ button to select the required option.
4, Press the EXIT or TOOLS button to exit.
Customizing the Picture Settings
Your television has several setting options that allow you to control the picture quality.
1. To select the desired picture mode, follow the "Changing the Picture
Standard" instructions numbers 1 and 2.
2. Press the ,_ or T button to select "Backlight", "Contrast", "Brightness",
"Sharpness", "Color" or "Tint(G/R)", then press the ENTER G# button.
3. Press the 4 or I_ button to decrease or increase the value of a particular
item. Press the ENTER _ button.
Press the EXIT button to exit.
>- When you make changes to "Backlight", "Contrast", "Brightness",
"Sharpness", "Color" or "Tint(G/R)", the OSD will be adjusted accordingly.
>- In PC mode, you can only make changes to "Backlight", "Contrast" and
"Brightness".
>- Settings can be adjusted and stored for each external device you have
connected to an input of the TV.
>- The energy consumed during use can be significantly reduced if the level
of brightness of the picture is reduced, and that this will reduce the overall
running cost.
, Backlighti Adjusts the biightness 0i LCD back light.
Contrast: Adjusts the contrast level of the pictu[e.
, Brightness: Adjusts the brightness level ef the picture,
; SharpneSsi Adjusts the edge definition of the pictu[e:
, co!or: Adjusts co!or saturation ofthe picture:
. Tint(G!R): Adjusts the color tint of the picture.
Adjusting the Detailed Settings
Samsung's new TVs allow you to make even more precise picture settings than previous models. See below to adjust
detailed picture settings.
Activating Detailed Settings
1. Press the MENU button to display the menu.
Press the ENTER _ button to select "Picture".
2. Press the ENTER _ button to select"Mode".
Press the A or T button to select "Standard" or "Movie", then press the
ENTER _ button.
>- "Detailed Settings" is available in "Standard" or "Movie" mode.
3=
Press the A or T button to select "Detailed Settings", then press the
ENTER _ button.
>- In PC mode, you can only make changes to "Dynamic Contrast",
"Gamma" and "White Balance" from among the "Detailed Settings" items.
Setting the Black adjust
You can select the black level on the screen to adjust the screen depth.
4. Press the A or • button to select "Black adjust", then press the ENTER
button.
5. Press the A.or T button to select "Off", "Low", "Medium" or "High".
Press the ENTER 13_button.
,, Off; Turns Offthe black adjustmeai functionl
;Low: Sets the black Color depth to loW.
,Medium: Sets the black color depth to medium.
, High: Sets the black color depth to highl
Setting the Dynamic Contrast
You can adjust the screen contrast so that the optimal contrast is provided.
6. Press the A or T button to select "Dynamic Contrast", then press the
ENTER _ button.
7. Press the A.or T button to select "Off", "Low", "Medium" or "High".
Press the ENTER _ button.
" Off; Turns offthe dynamic contrast adjustment function.
;Low: Sets the dynamic contrast to low,
,Medium: Sets the dynamic contrast to medium.
Nigh: Sets the dynamic contrast to highl
Adjusting theGamma
You can adjust the Primary Color (Red, Green, Blue) Intensity. (-3 ~ +3)
8. Press the A or • button to select "Gamma", then press the ENTER
button.
9. Press the _ or !_ button to decrease or increase the value.
Press the ENTER _ button.
Setting the Color Space
Color space is a color matrix composed of red, green and blue colors.
Select your favorite color space to experience the most natural color.
10, Press the A. or T button to select "Color Space", then press the ENTER C+-'
button.
1t. Press the ENTER _ button again to select "Color Space".
12. Press the A or T button to select "Auto", "Native" or "Custom".
Press the ENTER _ button.
' Auto: Auto Color Space automatically adjusts to the most natural color
tone based on program sources.
, NatiVe: Native Color Space offers deep and rich color tone .
o Custom:Adjusts the color range to suit your preference.
(see "Customizing the Color Space '_)
Customizing the Color Space
13, Press the A or T button to select "Color", then press the ENTER _ button.
._ "Color" is available when "Color Space" is set to "Custom".
14, Press the A or T button to select "Red", "Green", "Blue", "Yellow", "Cyan" or
"Magenta". Press the ENTER _ button.
15, Press the _, or T button to select "Red", "Green", or "Blue" to change it.
Press the ENTER _ button.
16, Press the _ or !_ button to decrease or increase the value of a particular
item. Press the ENTER C# button.
>- In "Color", you can adjust the RGB values for the selected color.
>- Toreset the adjusted RGB value, select "Reset".
' Red: Adjusts the red saturation leve! of the selected color.
, Green: Adjusts the green saturation leve! of the selected color.
, Blue: Adjusts th e blue saturation level of the selected color,
, Reset: Resets the color space to the default values.
>- Changing the adjustment value will refresh the adjusted screen.
>- Settings can be adjusted and stored for each external device you have
connected to an input of the TV. For example, if you have a DVD player
connected to HDMI 1 and it is currently selected, settings and adjustments
will be saved for the DVD player.
Adjusting the White Balance
You can adjust the color temperature for more natural picture colors.
17, Press the A or T button to select "White Balance", then press the
ENTER _ button.
18, Select the required option by pressing the A or _r button, then press the
ENTER _ button.
19, Press the _ or !_ button to decrease or increase the value of a particular
item. Press the ENTER _ button.
- R-Offset: Adjusts the red color darkness.
• G-Offset: Adjusts the green color darkness.
- B-Offset: Adjusts the blue color darkness.
- R-Gain: Adjusts the red color brightness.
- G-Gain: Adjusts the green color brightness.
o B-Gain: Adjusts the blue color brightness.
- Reset: The previously adjusted white balance will be reset to the
factory defaults.
_-- Changing the adjustment value will refresh the adjusted screen.
Adjusting the Flesh Tone
You can emphasize the pink 'flesh tone' in the picture.
20, Press the A or • button to select "Flesh Tone", then press the ENTER C,-'
button.
2t, Press the 4 or !_ button to decrease or increase the value.
Press the ENTER _ button.
Changing the adjustment value will refresh the adjusted screen.
Setting the Edge Enhancement
You can emphasize object boundaries in the picture.
22, Press the A or T button to select "Edge Enhancement", then press the
ENTER _ button.
23, Press the A or T button to select "Off' or "On". Press the ENTER _ button.
Setting the xvYCC
Setting the xvYCC mode to "On" increases detail and color space when watching
movies from an external device (ie. DVD player) connected to the HDMI or
Component IN jacks.
24, Press the A or • button to select "xvYCC", then press the ENTER
button.
25, Press the A or T button to select "Off" or "On".
Press the ENTER _ button.
"xvYCC" is available when the picture mode is set to "Movie", and the
external input is set to "HDMF or "Component" mode.
Resetting the Picture Settings to the Factory Defaults
t, To select the desired picture mode, follow the "Changing the Picture
Standard" instructions numbers 1 and 2. (see page 20)
2=
Press the A or T button to select "Picture Reset", then press the ENTER
button.
3=
Press the A or T button to select "OK" or "Cancel", then press the
ENTER _ button.
Press the EXiT button to exit.
Each mode can be reset.
Configuring Picture Options
Activating Picture Options
1, Press the MENU button to display the menu.
Press the ENTER _ button to select "Picture".
2, Press the A or • button to select "Picture Options", then press the ENTER
button.
Press the A or T button to select a particular item. Press the ENTER O_
button.
When you are satisfied with your setting, press the ENTER _ button.
In PC mode, you can only make changes to the "Color Tone" and "Size" from
among the items in "Picture Options".
Setting the Color Tone
1, Follow the "Activating Picture Options" instructions numbers 1 and 2.
2, Press the A or T button to select "Color Tone", then press the ENTER
button.
3=
Press the A or T button to select "Cool2", "Cool1", "Normal", "Warm1" or
"Warm2". Press the ENTER _ button.
> "Warm1" or "Warm2" is only activated when the picture mode is "Movie".
> Settings can be adjusted and stored for each external device you have
connected to an input of the TV.
Setting the Screen Size
Occasionally, you may want to change the size of the image on your screen. Your
TV comes with six screen size options, each designed to work best with specific
types of video input. Your cable box or satellite receiver may have its own set of
screen sizes as well. In general, though, you should view the TV in 16:9 mode as
much as possible.
1, Follow the "Activating Picture Options" instructions numbers 1 and 2.
2, Press the A or T button to select "Size", then press the ENTER _ button.
3, Press the A.or T button to select the screen format you want.
Press the ENTER _ button.
Press the EXiT button to exit.
- 16:9 : Sets the picture to 16:9 wide mode.
- Zoom1: Magnifies the size of the picture on the screen.
, Zoom2: Magnifies the size of the picture more than "Zoom1".
Wide Fit: Enlarges the aspect ratio of the picture to fit the entire screen.
• 4:3 : Sets the picture to 4:3 normal mode.
- Just Scan: Use the function to see the full image without any cutoff
when HDMI (720p!1060ii108Op), Component (108OiilO80p) or DTV
(1080i) signals are input.
>-WhenDouble([_, r-m ) mode has been set in PIP, the Picture Size cannot be set.
>- Temporary image retention may occur when viewing a static image on the set for more than two hours.
>_ After selecting "Zoom1", "Zoom2" or "Wide Fit":
Press the 4 or I_ button to select "Position", then press the ENTER
button. Press the A or _' button to move the picture up and down.
Reset: Press the 4 or I_ button to select "Reset", then press the ENTER
button. You can initialize the setting.
> After selecting "Just Scan" in HDMI (1080i/1080p) or Component
(1080i/1080p) mode:
Press the 4 or I_ button to select "Position", then press the ENTER
button. Press the A, T, _ or _- button to move the picture.
Reset: Press the 4 or I_ button to select "Reset", then press the ENTER
button. You can initialize the setting.
>- HD (High Definition)
16:9 - 1080i/1080p (1920x1080), 720p (1280x720)
>- Settings can be adjusted and stored for each external device you have connected to an input of the TV.
inputso,_,_._ur_ _ ...............................................
ATV, Video, S-Video, Component (480i, 480p) 16:9, Zoom1, Zoom2, 4:3
DTV(720p), Component (720p) 16:9, 4:3, Wide Fit
DTV(1080i), Component (1080i, 1080p), HDMI (720p, 1080i, 1080P) 16:9, 4:3, Wide Fit, Just Scan
PC 16:9, 4:3
Picture Size
/
(_ Alternately, you can press the RSIZE button on the remote control repeatedly
to change the picture size.
16:9 Zoom1 Zo_om2
Sets the picture to 16:9 wide mode. Magnifies the size of the picture on
the screen.
Wide Fit 4:3 Just Scan
Enlarges the aspect ratio of the Sets the picture to 4:3 normal mode. Use the function to see the full
picture to fit the entire screen image without any cutoff when HDM
Magnifies the size of the picture more
than "Zoom1
(720pt1080i11080p), Component
(1080i11080p) or DTV (1080i) signals
are input.
Setting the Digital Noise Reduction
If the broadcast signal received by your TV isweak, you can activate the Digital
Noise Reduction feature to help reduce any static and ghosting that may appear
on the screen.
1. Follow the "Activating Picture Options" instructions numbers 1 and 2.
(Refer to page 25)
2. Press the A or • button to select "Digital NR", then press the ENTER
button.
3. Press the A or T button to select "Off", "Low", "Medium", "High" or "Auto".
Press the ENTER _ button.
"Off: Turns the Screen noise reduction function off.
- Low: Reduces screen noise at a low level
,, Medium: Reduces screen noise at a medium level.
, High: Reduces Screen noise at a high leve !.
- Auto: Automatically recognizes and reduces screen noise.
Press the EXIT button to exit.
Setting the DNle (Digital Natural Image engine)
This TV includes the DNle function to provide high visual quality. If you set DNle
to on, you can view the screen with the DNle feature activated.
1. Follow the "Activating Picture Options" instructions numbers 1 and 2.
(Refer to page 25)
2. Press the A or T button to select "DNle", then press the ENTER
button.
3. Press the A or _r button to select "Off" or "On", then press the ENTER
button.
. Onl Switches on the DNIe mode.
Press the EXIT button to exit.
>- DNle TM (Digital Natural Image engine)
This feature brings you a more detailed image with 3D noise reduction
and detail, contrast and white enhancement.
>- "DNle" is only available in "Dynamic" mode.
Setting the HDMI Black Level
You can select the black level on the screen to adjust the screen depth.
1. Follow the "Activating Picture Options" instructions numbers 1 and 2.
(Refer to page 25)
2. Press the A.or T button to select "HDMI Black Level", then press the
ENTER _ button.
3. Press the ,i, or T button to select "Normal" or "Low", then press the
ENTER _ button.
, Low: The screen gets darker.
>- This function is active only when an external device is connected to the
TV via HDMI. "HDMI Black Level" function may not be compatible with
all external devices.
Press the EXiT button to exit.
Setting the Film Mode
The TV can be set to automatically sense and process film signals from all
sources and adjust the picture for optimum quality.
1. Follow the "Activating Picture Options" instructions numbers 1 and 2.
(Refer to page 25)
2. Press the A or • button to select "Film Mode", then press the ENTER
button.
3=
Press the A or T button to select "Off" or "Auto", then press the ENTER
button.
Press the EXIT button to exit.
:_ "Film mode" is supported in TV, Video, S-Video,
Component (480i / 1080i) and HDMI (480i / 1080i).
Setting the Blue Only Mode
This function is for AV device measurement experts. This function displays the
blue signal only by removing the red and green signals from the video signal so
as to provide a Blue Filter effect that is used to adjust the Color and Tint of video
equipment such as DVD players, Home Theaters, etc.
Using this function, you can adjust the Color and Tint to preferred values
appropriate to the signal level of each video device using the Red/Green/Blue/
Cyan/Magenta/Yellow Color Bar Patterns, without using an additional Blue Filter.
1. Follow the "Activating Picture Options" instructions numbers 1 and 2.
(Refer to page 25)
2. Press the A or T button to select "Blue Only Mode", then press the
ENTER _ button.
3. Press the A or T button to select "Off" or "On", then press the ENTER
button.
Press the EXIT button to exit.
"Blue Only Mode" is available when the picture mode is set to "Movie" or
"Standard".
Setting the Auto Motion Plus120Hz (LN40A650AIF, LN46A650AIF, LN52A650AIF)
Removes drag from fast scenes with a lot of movement to provide a clearer
picture.
1. Follow the "Activating Picture Options" instructions numbers 1 and 2.
(Refer to page 25)
2. Press the A or T button to select "Auto Motion Plus 120Hz", then press the
ENTER _ button.
3, Press the A or _' button to select "Off", "Low", "Medium", "High" or "Demo",
then press the ENTER _ button.
. Medium: Sets Auto Motion Plus 120Hz to medium.
,, High: sets Auto Motion Plus 120Hz to maximuml
. Demo: Displays the difference between Auto Motion Plus 120Hz on and
Off modes, The screen after applying !_AutoMotion Plus 120Hz" appears
on the left:
Press the EXIT button to exit.
If you enable "Auto Motion Plus 120Hz", noise may appear on the
screen. Ifthis occurs, set "Auto Motion Plus 120Hz" to "Off".
Loading...