Samsung LN52A610A1R, LN46A610A1R, LN32A610A1R User Manual

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

Contate a SAMSUNG EM TODO O MUNDO

Caso tenha dúvidas ou comentários sobre os produtos da Samsung, entre em contato com o centro de atendimento ao cliente da SAMSUNG.

Country

ARGENTINE 0800-333-3733 www.samsung.com/ar

BRAZIL

CHILE 800-SAMSUNG(726-7864) www.samsung.com/cl COLOMBIA 01-8000112112 www.samsung.com.co COSTA RICA 0-800-507-7267 www.samsung.com/latin ECUADOR 1-800-10-7267 www.samsung.com/latin EL SALVADOR 800-6225 www.samsung.com/latin GUATEMALA 1-800-299-0013 www.samsung.com/latin

HONDURAS 800-7919267 -

JAMAICA 1-800-234-7267 www.samsung.com/latin PANAMA 800-7267 www.samsung.com/latin PUERTO RICO 1-800-682-3180 www.samsung.com/latin REP. DOMINICA 1-800-751-2676 www.samsung.com/latin NICARAGUA 00-1800-5077267 MEXICO 01-800-SAMSUNG(726-7864) www.samsung.com TRINIDAD & TOBAGO 1-800-SAMSUNG(726-7864) www.samsung.com/latin VENEZUELA 0-800-100-5303 www.samsung.com/latin

IMPORTADO POR: AV. PRESIDENTE MASARIK #111 INT701 COL. CHAPULTEPEC MORALES C.P.11570 DELEGACION MIGUEL HIDALGO MEXICO. DISTRITO FEDERAL Tel: 01-55-5747-5100 / 01-800-726-7864

Customer Care Center

0800-124-421 4004-0000

Web Site

www.samsung.com

LCD TV

user manual

BN68-01429G-00

imagine the possibilities

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/global/register

Model Serial No.

Precautions When Displaying a Still Image

A still image may cause permanent damage to the TV screen

• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn". To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.

• Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and

center of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty.

• Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.

To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.

Contents

English

GENERAL INFORMATION

List of Features ............................................................................. 2

■

Accessories ..................................................................................2

■

Viewing the Control Panel ............................................................ 3

■

Viewing the Connection Panel ....................................................4

■

Remote Control ............................................................................ 5

■

Installing Batteries in the Remote Control .................................... 6

■

CONNECTIONS

Connecting VHF and UHF Antennas ............................................6

■

Connecting Cable TV ................................................................... 7

■

Connecting a DVD Player or Cable Box/Satellite receiver

■

(Set-Top Box) via HDMI ................................................................8

Connecting a DVD Player or Cable Box/Satellite receiver

■

(Set-Top Box) via DVI ...................................................................8

Connecting a DVD Player or Cable Box/Satellite receiver

■

(Set-Top Box) via Component cables ........................................... 9

Connecting a Camcorder ............................................................9

■

Connecting a VCR ...................................................................... 10

■

Connecting an Amplier/DVD Home Theater ............................. 11

■

Connecting a PC ........................................................................ 11

■

OPERATION

Turning the TV On and Off .........................................................12

■

Plug & Play Feature ...................................................................12

■

Changing Channels .................................................................... 13

■

Adjusting the Volume ..................................................................13

■

Viewing the Display .................................................................... 14

■

Viewing the Menus .....................................................................14

■

Using the TOOLS Button ............................................................ 14

■

Memorizing the Channels ........................................................... 15

■

To Select the Source ..................................................................16

■

To Edit the Input Source Name .................................................. 16

■

PICTURE CONTROL

Changing the Picture Standard .................................................. 17

■

Customizing the Picture Settings ...............................................17

■

Adjusting the Detailed Settings ..................................................18

■

Conguring Picture Options .......................................................21

■

Resetting the Picture Settings to the Factory Defaults ............... 24

■

Viewing Picture-in-Picture .......................................................... 25

■

SOUND CONTROL

Changing the Sound Standard ...................................................27

■

Customizing the Sound .............................................................. 27

■

Setting the TruSurround XT (SRS TS XT) ..................................28

■

Choosing a Multi-Channel Sound (MTS) track .......................... 28

■

Automatic Volume Control .......................................................... 29

■

Setting the TV Speaker On/Off ................................................... 29

■

Listening to the Sound of the Sub (PIP) Picture ......................... 30

■

Connecting Headphones (Sold separately) ................................ 30

■

CHANNEL CONTROL

Adding / Deleting Channels ........................................................ 31

■

Activating the Child Lock ............................................................ 32

■

Fine Tuning Analog Channels .................................................... 33

■

Using the Color System Feature ................................................ 33

■

PC DISPLAY

Using Your TV as a Computer (PC) Display ............................... 34

■

Display Modes ............................................................................ 34

■

Setting up the TV with your PC .................................................. 35

■

TIME SETTING

Setting the Clock ........................................................................ 37

■

FUNCTION DESCRIPTION

Selecting a Menu Language ....................................................... 39

■

Viewing Closed Captions (On-Screen Text Messages) .............. 40

■

Adjusting the TV On/Off Melody Sound......................................41

■

Setting the Entertainment mode ................................................. 41

■

Using the Energy Saving Feature ..............................................42

■

Using the AV Color System Feature ...........................................42

■

WISELINK

Using the WISELINK Function ................................................... 43

■

Using the WISELINK Menu ........................................................ 44

■

Using the Movie List ................................................................... 45

■

Using the PHOTO (JPEG) List ................................................... 46

■

Using the MP3 List ..................................................................... 49

■

Using the Setup Menu ................................................................ 50

■

ABOUT ANYNET

What is Anynet+? ....................................................................... 51

■

Connecting Anynet+ Devices ..................................................... 51

■

Setting Up Anynet+ ....................................................................52

■

Scanning and Switching between Anynet+ Devices ..................53

■

Recording ...................................................................................54

■

Listening through a Receiver (Home theater) ............................54

■

Troubleshooting for Anynet+ ...................................................... 55

■

APPENDIX

Troubleshooting .......................................................................... 56

■

Installing the Stand ..................................................................... 58

■

Disconnecting the Stand ............................................................58

■

Auto Wall-Mount (Sold separately) ............................................ 59

■

Wall Mount Kit Specications (VESA) ........................................ 60

■

Using the Anti-Theft Kensington Lock

■

(depending on the model) ..........................................................61

Securing the TV to the Wall ........................................................ 62

■

Specications ............................................................................. 63

■

English - 1

Symbol Press Note One-Touch

Button

General Information

List of Features

 Adjustable picture settings that can be stored in the TV’s memory.  Automatic timer to turn the TV on and off.  A special sleep timer.  HDMI/DVI connection of your PC to this TV.  Excellent Picture Quality

- DNIe technology provides life-like clear images.  SRS TruSurround XT

- SRS TruSurround XT provides a virtual surround system.

Accessories

Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.

Remote Control & Batteries

(AAA x 2)

(Not available in all locations)

Power Cord Cleaning Cloth Owner’s Instructions

The items color and shape may vary depending on the model.

Warranty Card / Registration Card /

Safety Guide Manual

(Not available in all locations)

Cover-Bottom

English - 2

Viewing the Control Panel

8 8

5 6

Buttons on the Lower-Right Part of the Panel

The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control.

Front Panel buttons

Touch each button to

The product color and shape may vary depending on the model.

operate.

SOURCE

Toggles between all the available input sources (TV, AV1, AV2, S-Video, Component1, Component2, PC, HDMI1, HDMI2/DVI, HDMI3, HDMI4). In the on-screen menu, use this button as you would use the ENTER button on the remote control.

Press to see an on-screen menu of your TV’s features.

– VOL +

Press to increase or decrease the volume. In the on-screen menu, use the – VOL + buttons as you

would use the ◄ and ► buttons on the remote control.

Press to change channels. In the on-screen menu, use the CH buttons as you

would use the ▼ and ▲ buttons on the remote control.

POWER INDICATOR

Blinks and turns off when the power is on and lights up in stand-by mode.

(Power)

Press to turn the TV on and off.

REMOTE CONTROL SENSOR

Aim the remote control towards this spot on the TV.

SPEAKERS

English - 3

HDMI IN4

Viewing the Connection Panel

Use the connection panel jacks to connect A/V components that will be connected continuously, such as DVD players or a VCR. For more information on connecting equipment, see pages 6~11.

[TV Rear Panel]

The product color and shape may vary depending on the model.

PC IN [PC] / [AUDIO]

Connects to the video and audio output jacks on your PC.

[TV Side Panel]

WISELINK

Connect a USB mass storage device to view photo files (JPEG), play audio files (MP3) and videos (AVI, MP4, PS).

AV IN 1, 2

Video and audio inputs for external devices, such as a camcorder or VCR.

S-VIDEO Connects an S-Video signal from a camcorder or VCR.

HDMI IN 1, 2, 3, 4 / DVI IN(HDMI2)[R-AUDIO-L]

Connects to the HDMI jack of a device with an HDMI output.

- No sound connection is needed for an HDMI to HDMI connection.

Use the HDMI IN 2 jack for DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI adapter (DVI to HDMI) for video connection and the DVI IN (HDMI2) [R-AUDIO-L] jacks for audio.

- When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.

ANT IN

Connects to an antenna or cable TV system.

SERVICE

- Connector for SERVICE only.

- Connect this to the jack on the optional wall mount bracket. This will allow you to adjust the TV viewing angle using your remote control.

English - 4

(HEADPHONE)

Connects a set of external headphones for private listening.

AUDIO OUT

Connects to the audio input jacks on your Amplifier/ Home theater.

POWER INPUT

Connects the supplied power cord.

COMPONENT IN 1, 2

Connects Component video/audio.

KENSINGTON LOCK (depending on the model)

The Kensington lock (optional) is a device used to physically fix the system when used in a public place. If you want to use a locking device, contact the dealer where you purchased the TV.

The location of the kensington lock may be different

➣

depending on its model.

Remote Control

You can use the remote control up to a distance of about 23 feet from the TV.

POWER

Turns the TV on and off.

Selects the TV mode directly.

NUMERIC BUTTONS

Press to change the channel.

Use to select a channel over

100. For example, for channel 122, press “ “2”.

(MUTE)

Press to temporarily cut off the sound.

6 VOL / VOL

Press to increase or decrease the volume.

CH LIST

Used to display Channel Lists on the screen.

TOOLS

Use to quickly select frequently used functions.

INFO

Press to display information on the TV screen.

COLOR BUTTONS

Use these buttons in the Channel list, WISELINK, etc.

Controls the caption decoder.

E.MODE

Press to select the preset display and sound modes for sports, cinema and games.

Use these buttons in the

WISELINK and Anynet+ modes. ( : This remote can be used to control recording on Samsung recorders with the Anynet+ feature)

”, then “2”, then

SOURCE

Press to display and select the available video sources.

PRE-CH

Tunes to the previous channel.

CH / CH

Press to change channels.

Displays the main on-screen menu.

W.LINK (WISELINK)

This function enables you to view and play photo and music files from an external device. ((Refer to pages 45 (Movie), 46 (Photo) and 49 (Music)).

(

RETURN

Returns to the previous menu.

)

 UP▲/DOWN▼/LEFT◄/

RIGHT►/ENTER

Use to select on-screen menu items and change menu values.

EXIT

Press to exit the menu.

P.MODE

Picture effect selection.

MTS

Press to choose stereo, mono or Separate Audio Program (SAP broadcast).

FAV.CH

Not available.

P.SIZE

Picture size selection.

The performance of the remote control may be affected by bright light.

➣

English - 5

Installing Batteries in the Remote Control

1. Lift the cover at the back of the remote control upward as shown in the figure.

2. Install two AAA size batteries.

Make sure to match the "+" and "–" ends of the batteries with the diagram inside the compartment.

3. Replace the cover. Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time.

If the remote control doesn’t work, check the following:

1. Is the TV power on?

2. Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power outage or is the power cord unplugged?

5. Is there a special fluorescent light or neon sign nearby?

Connections

Connecting VHF and UHF Antennas

If your antenna has a set of leads that look like the diagram to the right, see "Antennas with

300 Ω Flat Twin Leads" below.

If your antenna has one lead that looks like the diagram to the right, see "Antennas with 75 Ω Round Leads". If you have two antennas, see "Separate VHF and UHF Antennas".

Antennaswith300ΩFlatTwinLeads

If you are using an off-air antenna (such as a roof antenna or "rabbit ears") that has 300 Ω twin at leads, follow the directions

below.

1. Place the wires from the twin leads under the screws on a 300-75 Ω adapter

(not supplied). Use a screwdriver to tighten the screws.

2. Plug the adaptor into the ANT IN terminal on the back of the TV.

ANT IN

Antennaswith75ΩRoundLeads

1. Plug the antenna lead into the ANT IN terminal on the back of the TV.

ANT IN

Separate VHF and UHF Antennas

If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics shops).

1. Connect both antenna leads to the combiner.

UHF

VHF

2. Plug the combiner into the ANT IN terminal on the bottom of the rear panel.

English - 6

ANT IN

UHF

VHF

Connecting Cable TV

To connect to a cable TV system, follow the instructions below.

Cable without a Cable Box

1. Plug the incoming cable into the ANT IN terminal on the back of the TV.

Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels.

ANT IN

Connecting to a Cable Box that Descrambles All Channels

1. Find the cable that is connected to the ANT OUT terminal on your cable box. This terminal might be labeled "ANT OUT", "VHF OUT" or simply, "OUT".

ANT IN

ANT OUT

2. Connect the other end of this cable to the ANT IN terminal on the back of the TV.

ANT IN

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a twoway splitter, an RF (A/B) switch and four lengths of RF cable. (These items are available at most electronics stores.)

Find and disconnect the cable that is connected to the ANT IN terminal on your cable box.

This terminal might be labeled "ANT IN", "VHF IN" or simply, "IN".

ANT IN

2. Connect this cable to a two-way splitter.

Incoming

3. Connect an RF cable between the

OUTPUT terminal on the splitter and the IN terminal on the cable box.

Incoming

cable

Splitter

Cable Box

4. Connect an RF cable between the ANT OUT terminal on the cable box and the B–IN terminal on the RF(A/B) switch.

Incoming

cable

Splitter

Cable Box

RF (A/B)

Switch

5. Connect another cable between the other OUT terminal on the splitter and the A–IN terminal on the RF (A/B) switch.

Incoming

cable

Splitter

Cable Box

RF (A/B)

Switch

6. Connect the last RF cable between the OUT terminal on the RF (A/B) switch and

ANT IN

the ANT IN terminal on the rear of the TV.

Incoming

cable

Splitter

Cable Box

RF (A/B)

Switch

TV Rear

After you have made this connection, set the A/B switch to the "A" position for normal viewing. Set the A/B switch to the "B" position to view scrambled channels. (When you set the A/B switch to "B", you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)

English - 7

Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via HDMI

This connection can only be made if there is an HDMI Output connector on the external device.

1. Connect an HDMI Cable between the HDMI IN (1, 2, 3 or 4) jack on the TV and the HDMI jack on the DVD Player or Cable Box/Satellite receiver (Set-Top Box).

DVD Player or Cable Box/

Satellite receiver (Set-Top Box)

Rear Panel

TV Rear Panel

TV Side Panel

What is HDMI?

HDMI Cable (Not supplied)

• HDMI(High-Definition Multimedia Interface), is an interface that enables the transmission of digital audio and video signals using a single cable.

• The difference between HDMI and DVI is that the HDMI device is smaller in size and has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed.

Each DVD Player or Cable Box/Satellite receiver (Set-Top Box) has a different back panel configuration.

The TV may not output sound and pictures may be displayed with abnormal color when DVD players/Cable Boxes/Satellite receivers supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI cable and there is no sound, connect the HDMI cable to the HDMI IN 2 jack and the audio cables to the DVI IN (HDMI2) [R-AUDIO-L] jacks on the back of the TV. If this happens, contact the company that provided the DVD player/Cable Box/Satellite receiver to confirm the HDMI version, then request an upgrade.

HDMI cables that are not 1.3 may cause annoying flicker or no screen display.

Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via DVI

This connection can only be made if there is a DVI Output connector on the external device.

1. Connect a DVI to HDMI Cable or DVI-HDMI Adapter between the HDMI IN 2 jack on the TV and the DVI jack on the DVD Player or Cable Box/Satellite receiver (Set-Top Box).

DVD Player or Cable Box/

Satellite receiver (Set-Top Box)

TV Rear Panel

2. Connect Audio Cables between the DVI IN (HDMI2) [R-AUDIO-L] jack on the TV and the DVD Player or Cable Box/Satellite receiver (Set-Top Box).

Audio Cable (Not supplied)

DVI to HDMI Cable (Not supplied)1

Each DVD Player or Cable Box/Satellite receiver (Set-Top Box) has a different back panel configuration. When connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box), match the color of the connection terminal to the cable. When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.

English - 8

Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via Component cables

The rear panel jacks on your TV make it easy to connect a DVD Player or Cable Box/Satellite receiver (Set-Top Box) to your TV.

1. Connect a Component Cable between the COMPONENT IN (1 or 2) [Y, PB, PR] jacks on the TV and the COMPONENT [Y, PB, PR] jacks on the DVD Player or Cable Box/Satellite receiver (Set-Top Box).

2. Connect Audio Cables between the COMPONENT IN(1 or 2) [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the DVD Player or Cable Box/Satellite receiver (Set-Top Box).

DVD Player or Cable Box /

Satellite receiver (Set-Top Box)

Audio Cable (Not supplied)

Component Cable (Not supplied)

Component video separates the video into Y (Luminance (brightness)), Pb (Blue) and Pr (Red) for enhanced video quality. Be sure to match the component video and audio connections. For example, if connecting the video cable to COMPONENT IN 1, connect the audio cable to COMPONENT IN 1 also.

Each DVD Player or Cable Box/Satellite receiver (Set-Top Box) has a different back panel

configuration.

When connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box), match the

color of the connection terminal to the cable.

TV Rear Panel

Connecting a Camcorder

The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow you to view the camcorder tapes without using a VCR.

1. Connect a Video Cable (or S-Video Cable) between the AV IN 2 [VIDEO] (or S-VIDEO) jack on the TV and the VIDEO OUT jack on the camcorder.

2. Connect Audio Cables between the AV IN 2 [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the camcorder.

Camcorder

Each Camcorder has a different back panel configuration. When connecting a Camcorder, match the color of the connection terminal to the cable.

S-Video Cable (Not supplied)

Video Cable (Not supplied)

Audio Cable (Not supplied)

TV Side Panel

English - 9

Connecting a VCR

Video Connection

These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 6~7). Skip step 1 if you have not yet connected to an antenna or a cable system.

1. Unplug the cable or antenna from the back of the TV.

2. Connect the cable or antenna to the ANT IN terminal on the back of the VCR.

3. Connect an RF Cable between the ANT OUT terminal on the VCR and the ANT IN terminal on the TV.

4. Connect a Video Cable between the VIDEO OUT jack on the VCR and the AV IN 1 or AV IN 2 [VIDEO] jack on the TV.

5. Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AV IN 1 (or AV IN 2) [R-AUDIO-L] jacks on the TV.

If you have a “mono”

(non-stereo) VCR, use a Y-connector (not supplied) to hook up to the right and left audio input jacks of the TV. If your VCR is stereo, you must connect two cables.

VCR Rear Panel

Audio Cable (Not supplied)

Video Cable (Not supplied)

RF Cable (Not supplied)3

Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.

Each VCR has a different back panel configuration. When connecting a VCR, match the color of the connection terminal to the cable.

ANT IN

TV Rear Panel

TV Side Panel

S-Video Connection

Your Samsung TV can be connected to an S-Video jack on a VCR. (This connection delivers a better picture as compared to a standard VCR.)

1. To begin, follow steps 1–3

TV Rear Panel

in the previous section to connect the antenna or cable to your VCR and your

VCR Rear Panel

TV.

2. Connect an S-Video Cable between the S-VIDEO OUT jack on the VCR and the AV IN 2 [S-VIDEO] jack on the TV.

3. Connect Audio Cables

RF Cable (Not supplied)1

S-Video Cable (Not supplied)

between the AUDIO OUT jacks on the VCR and the AV IN 2 [R-AUDIO-L] jacks

Audio Cable (Not supplied)

on the TV.

An S-Video cable may be included with a VCR. (If not, check your local electronics store.)

Each VCR has a different back panel configuration. When connecting a VCR, match the color of the connection terminal to the cable.

English - 10

TV Side Panel

ConnectinganAmplier/DVDHomeTheater

1. Connect Audio Cables between the AUDIO OUT [R-AUDIO-L] jacks on the TV and AUDIO IN [R-AUDIO-L] jacks on the Amplifier/DVD Home Theater.

When an audio amplifier is

connected to the "AUDIO OUT [R-AUDIO-L]" jacks: Decrease the volume of the TV and adjust the volume level with the Amplifier’s volume control.

Connecting a PC

Using the D-Sub Cable

1. Connect a D-Sub Cable between PC IN [PC] connector on the TV and the PC output connector on your computer.

2. Connect a PC Audio Cable between the PC IN [AUDIO] jack on the TV and the Audio Out jack of the sound card on your computer.

Using the HDMI/DVI Cable

1. Connect a HDMI/DVI cable between the HDMI IN 2 jack on the TV and the PC output jack on your computer.

2. Connect a 3.5 mm Stereo mini-plug/2RCA Cable between the DVI IN(HDMI2) [R-AUDIO-L] jack on the TV and the Audio Out jack of the sound card on your computer.

TV Rear Panel

Amplier/DVDHomeTheater

Audio Cable (Not supplied)

Each Amplifier/DVD Home Theater has a different back panel configuration. When connecting an Amplifier/DVD Home Theater, match the color of the connection

terminal to the cable.

Using the D-Sub Cable

PC Audio Cable (Not supplied)2

D-Sub Cable (Not supplied)

TV Rear Panel

Using the HDMI/DVI Cable

3.5 mm Stereo mini-plug/2RCA Cable (Not supplied)

HDMI/DVI Cable (Not supplied)1

Each PC has a different back panel configuration. When connecting a PC, match the color of the connection terminal to the cable. When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.

English - 11

Operation

Turning the TV On and Off

Press the POWERP button on the remote control.

You can also use the POWER

button on the TV.

Plug & Play Feature

When the TV is initially powered on, basic settings proceed automatically and subsequently :

Plug & Play

1. Press the POWER button on the remote control.

The message "Start Plug & Play." is displayed with "OK" selected.

2. Press the ENTER button to enter the language.

Press the ▲ or ▼ button to select language, then press the ENTER button.

The message “Select ‘Home Use’ when installing this TV in your home.” menu is automatically displayed.

Press the ◄ or ► button to select “Store Demo” or “Home Use ”, then, press the

ENTER button.

We recommend setting the TV to “Home Use” mode for the best picture in your

home environment. “Store Demo” mode is only intended for use in retail environments. If the unit is accidentally set to “Store Demo” mode and you want to return to

“Home Use” (Standard): Press the Volume button on the TV. When the volume

OSD is displayed, press and hold the MENU button on the TV for 5 seconds.

4. The message "Check antenna input." is displayed with "OK" selected. Press the ENTER button.

5. Press the ▲ or ▼ button to select "Air", "STD", "HRC", or "IRC", then press the

ENTER button.

Press the ENTER button to select "Start". The TV will begin memorizing all of the available channels.

To stop the search before it has finished, press the ENTER button with "Stop"

selected.

The Clock Set menu is displayed. Press the ◄ or ► button to move to the "Month",

"Day", "Year", "Hour", "Minute" or "am/pm".

Set the "Month", "Day", "Year", "Hour", "Minute" or "am/pm" by pressing the ▲ or ▼

button. Press the ENTER button. (Refer to "Setting the Clock"on page 37)

You can set the month, day, year, hour, and minute directly by pressing the

number buttons on the remote control.

8. The message "Enjoy your watching." is displayed. When you have finished, press the ENTER button.

Start Plug & Play.

Enter

Plug & Play

Language

Move Enter

when installing this TV in your home.

Store Demo

Move Enter

Enter Skip

Air/Cable

Move Enter Skip

Enter Skip

Clock Set Month Day Year Hour Minute am/pm

English

Français

Español

Português

Plug & Play

Select ‘Home Use’

Home Use

Plug & Play

Check antenna input.

Plug & Play

Air

STD

HRC

IRC

Plug & Play

Air 50

Stop

Plug & Play

01 2008 12 : 00 am

English - 12

Move Adjust Enter

Plug & Play

Enjoy your watching.

If you want to reset this feature...

1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER button.

2. Press the ENTER button again to select “Plug & Play”.

For further details on setting up options, refer to the pages 12.

The “Plug & Play” feature is only available in the TV mode.

Changing Channels

Using the Channel Buttons

1. Press the CH< or CH> button to change channels. When you press theCH< or CH> button, the TV changes channels in

sequence. You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels). You will not see channels that were either erased or not memorized. See page 15 to memorize channels.

Using the Number Buttons

1. Press the number buttons to go directly to a channel. For example, to select

channel 27, press 2, then 7.

For quick channel change, press the number buttons, then press the ENTER

button.

Plug & Play ► Language : English ► Time ► Caption ► External Settings ► Entertainment : Off ► Energy Saving : Off ►

AV Color System : Auto ► PIP ►

Move Enter Return

Setup

Using the PRE-CH Button to select the Previous Channel

1. Press the PRE-CH button. The TV will switch to the last channel viewed.

To quickly switch between two channels that are far apart, tune to one channel, then use the number button to select the second channel. Then use the PRE-CH button to quickly alternate between them.

Adjusting the Volume

Using the Volume Buttons

1. Press the

Using the MUTE button At any time, you can cut off the sound using the MUTE button.

1. Press MUTE button and the sound cuts off. " " is displayed on the screen.

2. To turn mute off, press the MUTE button again or simply press the VOL- or VOL+ button.

VOL- or VOL+ button to increase or decrease the volume.

English - 13

Viewing the Display

The display identies the current channel and the status of certain audio-video settings.

1. Press the INFO button on the remote control.

The TV will display the channel, the type of sound, and the status of certain picture and sound settings.

Press the INFO button once more or wait approximately 10 seconds and the

➣

display disappears automatically.

Viewing the Menus

1. With the power on, press the MENU button.

The main menu appears on the screen. The menu’s left side has icons: Picture, Sound, Channel, Setup, Input.

2. Press the ▲ or ▼ button to select one of the icons.

Then press the ENTER button to access the icon’s sub-menu.

3. Press the

EXIT button to exit.

The on-screen menus disappear from the screen after about one minute.

Air 7 Mono

Picture : Standard Sound : Custom MTS : Stereo SRS TS XT : Off

05 : 54 pm

Mode : Standard ► Backlight 7 Contrast 95 Brightness 40 Sharpness 50 Color 50 Tint G 50 R 50 Detailed Settings ►

▼More

Move Enter Exit

PictureTV

Using the TOOLS Button

You can use the TOOLS button to select your frequently used functions quickly and easily. The “Tools” menu changes depending on which external input mode you are viewing.

1. Press the TOOLS button. The “Tools” menu will appear.

2. Press the ▲ or ▼ button to select a menu.

3. Press the ▲/▼/◄/►/ENTER buttons to display, change, or use the selected items.

For a more detailed description of each function, refer to the corresponding page.

• Anynet+ (HDMI-CEC): see page 52

• Picture Mode: see page 17

• Sound Mode: see page 27

• Sleep Timer: see page 38

• SRS TS XT: see page 28

• Energy Saving: see page 42

• MTS: see page 28

• PIP: see pages 25~26

• Auto Adjustment: see pages 35

English - 14

Anynet+ (HDMI-CEC)

Picture Mode : Standard Sound Mode : Custom Sleep Timer : Off SRS TS XT : Off Energy Saving : Off MTS : Stereo

Move Enter Exit

Tools

Memorizing the Channels

Your TV can memorize and store all of the available channels for both "off-air" (Air) and "Cable" channels. After the available channels are memorized, use the CH< or CH> button to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding or deleting channels (Channel Manager).

Selecting the Video Signal-source

Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system).

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Channel", then press the ENTER button.

2. Press the ENTER button. Repeatedly press the ▲ or ▼ button to cycle through these choices: "Air", "STD", "HRC", or "IRC" (all cable TV).

Press the ENTER button. STD, HRC and IRC identify various types of cable TV systems.

Contact your local cable company to identify the type of cable system that exists in your particular area. At this point, the signal source has been selected.

Air / Cable : Air ► Auto Program ► Channel Manager ► Fine Tune ► Color System : Auto ►

Air / Cable : Air

Auto Program Channel Manager Fine Tune Color System : Auto

ChannelTV

Move Enter Return

ChannelTV

Air

STD HRC IRC

Move Enter Return

Storing Channels in Memory (Automatic Method)

1. First, select the correct signal source (Air, STD, HRC, or IRC).

2. Press the ▲ or ▼ button to select "Auto Program", then press the ENTER

3. Press the ENTER

The TV will begin memorizing all of the available channels.

button to select "Start".

button.

The TV automatically cycles through all of the available channels and stores them in memory. This takes about one to two minutes. Press the

button at any time to interrupt the memorization process and return to the

ENTER

"Channel" menu.

4. After all the available channels are stored, the "Channel" menu reappears. Press the EXIT button to exit.

To stop the search before it has finished, press the ENTER button with "Stop"

selected.

Air / Cable : Air ► Auto Program ► Channel Manager ► Fine Tune ► Color System : Auto ►

Move Enter Return

Auto Program

Stop

Enter Return

ChannelTV

Air 40

English - 15

To Select the Source

Use to select TV or other external input sources such as DVD players or Cable Box/ Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of your choice.

1. Press the MENU button to display the menu. Press the▲ or ▼ button to select “Input”, then press the ENTER button.

2. Press the ENTER button to select "Source List".

Press the ▲ or ▼ button to select signal source, then press the ENTER button.

Available signal sources: “TV”, “AV1”, “AV2”, “S-Video”, “Component1”,

“Component2”, “PC”, “HDMI1”, “HDMI2”, “HDMI3”, “HDMI4”.

You can choose only those external devices that are connected to the TV.

Press the SOURCE button on the remote control to view an external signal source.

To Edit the Input Source Name

Name the device connected to the input jacks to make your input source selection easier.

1. Press the MENU button to display the menu.

Press the▲ or ▼ button to select “Input”, then press the ENTER button. Press the ▲ or ▼ button to select "Edit Name", then press the ENTER button.

Source List : TV ► Edit Name ► Anynet+ (HDMI-CEC) WISELINK

AV1 : ---AV2 : ---S-Video : ---Component1 : ---Component2 : ---PC : ----

▼ More

Source List : TV ► Edit Name ► Anynet+ (HDMI-CEC) WISELINK

InputTV

Move Enter Return

Source ListTV

Move Enter Return

InputTV

Press the ▲ or ▼ button to select "AV1", "AV2", "S-Video", "Component1",

"Component2", "PC", "HDMI1", "HDMI2", "HDMI3", "HDMI4" input jack, then press the ENTER button.

Press the ▲ or ▼ button to select "VCR", "DVD", "Cable STB", "Satellite STB",

"PVR STB", "AV Receiver", "Game", "Camcorder", "PC", "TV", "IPTV", "Blu-Ray", "HD DVD", "DMA" input source, then press the ENTER button. Press the EXIT button to exit.

➣

When a PC with a resolution of 1920 x 1080@60Hz is connected to the HDMI IN 2 port, you should set the “HDMI2/DVI” mode to “PC” in the “Edit Name” of the “Input” mode.

English - 16

Move Enter Return

AV1 : ------ ►

AV2 : ------ ► S-Video : ------ ► Component1 : ------ ► Component2 : ------ ► PC : ------ ► HDMI1 : ------ ► ▼ More

AV1 : ------

AV2 : ------ S-Video : ------ Component1 : ------ Component2 : ------ PC : ------ HDMI1 : ------ ▼ More

Edit NameTV

Move Enter Return

Edit NameTV

-----

VCR DVD

Cable STB

Satellite STB

PVR STB

AV Receiver

▼

Move Enter Return

Picture Control

Changing the Picture Standard

You can activate either Dynamic, Standard, Movie by making a selection from the menu.

1. Press the MENU button to display the menu. Press the ENTER button, to select “Picture”.

2. Press the ENTER

Press the ▲ or ▼ button to select the “Dynamic”, “Standard” or “Movie”.

 Dynamic: Selects the picture for high-denition in a bright room.  Standard: Selects the picture for the optimum display in a normal environment.  Movie: Selects the picture for viewing movies in a dark room.

3. Press the

You can also press the P.MODE button on the remote control to select one of the

EXIT button to exit.

picture settings.

button to select "Mode".

Mode : Standard ► Backlight 7 Contrast 95 Brightness 40 Sharpness 50 Color 50 Tint G 50 R 50 Detailed Settings ►

▼More

Mode : Standard

Backlight 7 Contrast 95 Brightness 40 Sharpness 50 Color 50 Tint G 50 R 50 Detailed Settings

▼More

PictureTV

Move Enter Return

PictureTV

Dynamic

Standard

Movie

Move Enter Return

Easy Setting

1. Press the TOOLS button on the remote control.

Press the ▲ or ▼ button to select “Picture Mode”.

3. Press the ◄ or ► button to select the desired picture mode.

4. Press the EXIT or TOOLS button to exit.

Customizing the Picture Settings

Your television has several setting options that allow you to control the picture quality.

1. Press the MENU button to display the menu. Press the ENTER button, to select “Picture”.

Press the ▲ or ▼ button to select “Backlight”, “Contrast”, “Brightness”,

“Sharpness”, “Color” or “Tint”, then press the ENTER button.

3. Press the ◄ or ► button to decrease or increase the value of a particular item.

Press the ENTER button.

Press the EXIT button to exit.

➣

When you make changes to “Backlight”, “Contrast”, “Brightness”, “Sharpness”, “Color” or “Tint”, the OSD will be adjusted accordingly.

➣

In PC mode, you can only make changes to “Backlight”, “Contrast”, and “Brightness”.

➣

Settings can be adjusted and stored for each external device you have connected to an input of the TV.

➣

The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and that this will reduce the overall running cost.

➣

In TV, AV1, AV2, S-Video modes of the PAL system, you cannot use the “Tint” Function.

Backlight: Adjusts the brightness of LCD back light.

•

Contrast: Adjusts the contrast level of the picture.

•

Brightness: Adjusts the brightness level of the picture.

•

Sharpness: Adjusts the edge definition of the picture.

•

Color: Adjusts color saturation of the picture.

•

Tint

•

: Adjusts the color tint of the picture.

Anynet+ (HDMI-CEC)

Picture Mode ◄ Standard ►

Sound Mode : Custom Sleep Timer : Off SRS TS XT : Off Energy Saving : Off MTS : Stereo

Move Adjust Exit

▲

Backlight

▼

Tools

Mode : Standard ► Backlight 7 Contrast 95 Brightness 40 Sharpness 50 Color 50 Tint G 50 R 50 Detailed Settings ►

▼More

Move Adjust Return

PictureTV

Move Enter Return

English - 17

Adjusting the Detailed Settings

Samsung's new TVs allow you to make even more precise picture settings than previous models. See below to adjust detailed picture settings.

Activating Detailed Settings

1. Press the MENU button to display the menu.

Press the ENTER button to select “Picture”.

2. Press the ENTER button to select “Mode”

Press the ▲ or ▼ button to select "Standard" or "Movie", then press the ENTER

button.

"Detailed Settings" is available in "Standard" or "Movie" mode.

3. Press the ▲ or ▼ button to select “Detailed Settings”, then press the

ENTER button.

In PC mode, you can only make changes to “Dynamic Contrast”, “Gamma” and

“White Balance” from among the “Detailed Settings” items.

Activating Black Adjust

You can select the black level on the screen to adjust the screen depth.

4. Press the ▲ or ▼ button to select “Black Adjust”, then press the ENTER

button.

5. Press the ▲ or ▼ button to select “Off”, “Low”, “Medium” or “High”.

Press the ENTER button.

 Off: Turns off the black adjustment function.  Low: Sets the black color depth to low.  Medium: Sets the black color depth to medium.  High: Sets the black color depth to high.

Mode : Standard ► Backlight 7 Contrast 95 Brightness 40 Sharpness 50 Color 50 Tint G 50 R 50 Detailed Settings ►

▼More

Black Adjust : Off ► Dynamic Contrast : Medium ► Gamma : 0 ► Color Space : Native ► White Balance ► Flesh Tone : 0 ► Edge Enhancement : Off ►

xvYCC : Off ►

Black Adjust : Off

Dynamic Contrast : Low Gamma : 0 Color Space : Native White Balance Flesh Tone : 0 Edge Enhancement : Off

xvYCC : Off

PictureTV

Move Enter Return

Detailed SettingsTV

Move Enter Return

Detailed SettingsTV

Move Enter Return

Off

Low

Medium

High

Activating Dynamic Contrast

You can adjust the screen contrast so that the optimal contrast is provided.

6. Press the ▲ or ▼ button to select “Dynamic Contrast”, then press the

ENTER button.

7. Press the ▲ or ▼ button to select “Off”, “Low”, “Medium” or “High”.

Press the ENTER button.

 Off: Turns off the dynamic contrast adjustment function.  Low: Sets the dynamic contrast to low.  Medium: Sets the dynamic contrast to medium.  High: Sets the dynamic contrast to high.

English - 18

Detailed SettingsTV

Black Adjust : Off ► Dynamic Contrast : Medium ► Gamma : 0 ► Color Space : Native ► White Balance ► Flesh Tone : 0 ► Edge Enhancement : Off ►

xvYCC : Off ►

Move Enter Return

Detailed SettingsTV

Black Adjust : Off

Dynamic Contrast : Low

Gamma : 0 Color Space White Balance Flesh Tone : 0 Edge Enhancement : Off

xvYCC : Off

Move Enter Return

Off

Low

Medium

High

Activating Gamma

You can adjust the Primary Color (Red, Green, Blue) Intensity. (-3 ~ +3)

8. Press the ▲ or ▼ button to select “Gamma”, then press the ENTER

9. Press the ◄ or ► button to decrease or increase the value.

Press the ENTER button.

button.

Detailed SettingsTV

Black Adjust : Off ► Dynamic Contrast : Medium ► Gamma : 0 ► Color Space : Native ► White Balance ► Flesh Tone : 0 ► Edge Enhancement : Off ►

xvYCC : Off ►

Move Enter Return

Changing the Color Space

Color space is a color matrix composed of “Red”, “Green” and “Blue” colors. Select your favorite color space to experience the most natural color.

10.

Press the ▲ or ▼ button to select “Color Space”, then press the ENTER button.

11. Press the ENTER button again to select “Color Space”.

12. Press the ▲ or ▼ button to select “Auto”, “Native” or “Custom”.

Press the ENTER button.

Auto: Auto Color Space automatically adjusts to the most natural color

• tone based on program sources.

Native: Native Color Space offers deep and rich color tone.

•

Custom

•

: Adjusts the color range to suit your preference.

(see “Customizing the Color Space”)

Customizing the Color Space

13. Press the ▲ or ▼ button to select “Color”, then press the ENTER button.

“Color” is available when “Color Space” is set to “Custom”.

➣

14.

Press the ▲ or ▼ button to select “Red”, “Green”, “Blue”, “Yellow”, “Cyan” or

“Magenta”. Press the ENTER button.

15. Press the ▲ or ▼ button to select “Red”, “Green” or “Blue” to change it.

Press the ENTER button.

16. Press the ◄ or ► button to decrease or increase the value of a particular item.

Press the ENTER button.

In “Color”, you can adjust the RGB values for the selected color.

➣

To reset the adjusted RGB value, select Reset.

➣

Red: Adjusts the red saturation level.

•

Green: Adjusts the green saturation level.

•

Blue: Adjusts the blue saturation level.

•

Reset: Resets the color space to the default values.

•

➣

Changing the adjustment value will refresh the adjusted screen.

➣

Settings can be adjusted and stored for each external device you have connected to an input of the TV.

Gamma

Adjust Return

Detailed SettingsTV

Black Adjust : Off ► Dynamic Contrast : Medium ► Gamma : 0 ► Color Space : Native ► White Balance ► Flesh Tone : 0 ► Edge Enhancement : Off ►

xvYCC : Off ►

Move Enter Return

Color Space : Auto

Color : Red Red 50 Green 0 Blue 0 Reset

Move Enter Return

Color Space : Custom ► Color : Red ► Red 50 Green 0 Blue 0 Reset

Move Enter Return

Color Space : Custom

Color : Red

Red 50 Green 0 Blue 0 Reset

Move Enter Return

▲

Red

▼

Move Adjust Return

Color SpaceTV

Auto

Native

Custom

Color SpaceTV

Red

Green

Blue

Yellow

Cyan

Magenta

English - 19

Activating White Balance

You can adjust the color temperature for more natural picture colors.

17. Press the ▲ or ▼ button to select “White Balance”, then press the ENTER button.

18. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.

19. Press the ◄ or ► button to decrease or increase the value of a particular item. Press the ENTER button.

 R-Offset: Adjusts the red color darkness.  G-Offset: Adjusts the green color darkness.  B-Offset: Adjusts the blue color darkness.  R-Gain: Adjusts the red color brightness.  G-Gain: Adjusts the green color brightness.  B-Gain: Adjusts the blue color brightness.

The previously adjusted white balance will be reset to the factory defaults.

 Reset:

Changing the adjustment value will refresh the adjusted screen.

Detailed SettingsTV

Black Adjust : Off ► Dynamic Contrast : Medium ► Gamma : 0 ► Color Space : Native ► White Balance ► Flesh Tone : 0 ► Edge Enhancement : Off ►

xvYCC : Off ►

Move Enter Return

R-Offset 25 G-Offset 25 B-Offset 25 R-Gain 25 G-Gain 25 B-Gain 25 Reset

▲

R-Offset

▼

Move Adjust Return

White BalanceTV

Move Enter Return

Flesh Tone

You can emphasize the pink flesh tone in the picture.

20. Press the ▲ or ▼ button to select “Flesh Tone”, then press the ENTER button.

21. Press the ◄ or ► button to decrease or increase the value.

Press the ENTER button.

Changing the adjustment value will refresh the adjusted screen.

Activating Edge Enhancement

You can emphasize object boundaries in the picture.

22. Press the ▲ or ▼ button to select “Edge Enhancement”, then press the ENTER button.

23. Press the ▲ or ▼ button to select “Off” or “On”. Press the ENTER button.

Activating xvYCC

Setting the xvYCC mode to “On” increases detail and color space when watching movies from an external device (ie. DVD player) connected to the HDMI or Component IN jacks.

24. Press the ▲ or ▼ button to select “xvYCC”, then press the ENTER

button.

25. Press the ▲ or ▼ button to select “Off” or “On”. Press the ENTER button.

“xvYCC” is available when the picture mode is set to “Movie”, and the external

input is set to “HDMI” or “Component” mode.

English - 20

Detailed SettingsTV

Black Adjust : Off ► Dynamic Contrast : Medium ► Gamma : 0 ► Color Space : Native ► White Balance ► Flesh Tone : 0 ► Edge Enhancement : Off ►

xvYCC : Off ►

Move Enter Return

Flesh Tone

Adjust Return

Detailed SettingsTV

Black Adjust : Off ► Dynamic Contrast : Medium ► Gamma : 0 ► Color Space : Native ► White Balance ► Flesh Tone : 0 ► Edge Enhancement : Off ►

xvYCC : Off ►

Move Enter Return

Detailed SettingsTV

Black Adjust : Off Dynamic Contrast : Medium Gamma : 0 Color Space : Native White Balance Flesh Tone : 0

Edge Enhancement : Off

xvYCC : Off

Move Enter Return

Detailed SettingsTV

Black Adjust : Off ► Dynamic Contrast : Off ► Gamma : -1 ► Color Space : Auto ► White Balance ► Flesh Tone : 0 ► Edge Enhancement : Off ► xvYCC : Off ►

Move Enter Return

Detailed SettingsTV

Black Adjust : Off Dynamic Contrast : Off Gamma : -1 Color Space : Auto White Balance Flesh Tone : 0 Edge Enhancement :Off

xvYCC : Off

Move Enter Return

Off

ConguringPictureOptions

Activating Picture Options

1. Press the MENU button to display the menu. Press the ENTER button, to select “Picture”.

2. Press the ▲ or ▼ button to select "Picture Options", then press the ENTER

button.

Press the ▲ or ▼ button to select a particular item. Press the ENTER button. When you are satisfied with your setting, press the ENTER button. In PC mode, you can only make changes to the “Color Tone” and “Size” from

among the items in “Picture Options”.

▲More

Picture Options ► Reset : OK ►

PictureTV

Move Enter Return

Adjusting the Color Tone

1. Follow the “Activating Picture Options” instructions numbers 1 and 2.

2. Press the ▲ or ▼ button to select “Color Tone”, then press the ENTER

button.

3. Press the ▲ or ▼ button to select “Cool2”, “Cool1”, “Normal”, “Warm1” or “Warm2”. Press the ENTER button.

“Warm1” or “Warm2” is only activated when the picture mode is “Movie”. Settings can be adjusted and stored for each external device you have connected

to an input of the TV.

Changing the Screen Size

Occasionally, you may want to change the size of the image on your screen. Your TV comes with various screen size options, each designed to work best with specific types of video input. Your cable box or satellite receiver may have its own set of screen sizes as well. In general, though, you should view the TV in 16:9 mode as much as possible.

1. Follow the “Activating Picture Options” instructions numbers 1 and 2.

Press the ▲ or ▼ button to select “Size”, then press the ENTER button.

3. Press the ▲ or ▼ button to select the screen format you want. Press the ENTER button.

Press the EXIT button to exit.

16:9 : Sets the picture to 16:9 wide mode.

•

Wide Zoom: Magnify the size of the picture more than 4:3.

•

Zoom: Magnifies the size of the picture on the screen.

•

4:3 : Sets the picture to 4:3 normal mode.

•

Just Scan

: Use the function to see the full image without any cutoff when

HDMI (720p/1080i/1080p), Component (1080i/1080p) signals are input.

ColorTone :Normal ► Size :16:9 ► DigitalNR :Auto ►

DNle :Off ► HDMIBlackLevel :Normal ►

Movie Plus

BlueOnlyMode :Off ►

Color Tone : Normal

Size : 16:9 Digital NR : Auto

DNle :Off►

HDMI Black Level : Normal

Movie Plus Blue Only Mode : Off

ColorTone :Normal ► Size :16:9 ► DigitalNR :Auto ►

DNle :Off ► HDMIBlackLevel :Normal ►

Movie Plus

BlueOnlyMode :Off ►

16:9 Wide Zoom Zoom 4:3

Just Scan

Picture OptionsTV

 :Low ►

Move Enter Return

Picture OptionsTV

Cool2

Cool1

Normal

Warm1 Warm2

: Low

Move Enter Return

Picture OptionsTV

 :Low ►

Move Enter Return

SizeTV

Move Enter Return

English - 21

When Double ( , ) mode has been set in PIP, the Picture Size cannot

➣

be set. Temporary image retention may occur when viewing a static image on the set

➣

for more than two hours. After selecting “Zoom” mode: Select

➣

by pressing the ◄ or ► button. Use the ▲ or ▼ button to move the picture up and down. After selecting , use the ▲ or ▼ button to magnify or reduce the picture size in the vertical

direction.

➣

Wide Zoom: Move the screen up/down using the ▲ or ▼ button after selecting

the

by pressing the ► or ENTER button.

➣

After selecting “Just Scan” in HDMI (1080i/1080p) or Component (1080i/1080p) mode: Select by pressing the ◄ or ►button. Use the ▲, ▼, ◄ or ► button to move the picture. Press the ENTER button. Reset: Press the ◄ or ► button to select “Reset”, then press the ENTER

button. You can initialize the setting.

➣

HD (High Definition) 16:9 - 1080i/1080p (1920x1080), 720p (1280x720)

➣

Settings can be adjusted and stored for each external device you have connected to an input of the TV.

Input Source Picture Size

TV, AV, S-Video, Component (480i,480p) 16:9, Wide Zoom, Zoom, 4:3 Component(1080i, 1080p), HDMI (1080i, 1080p) 16:9, Wide Zoom, Zoom, 4:3, Just Scan PC 16:9, 4:3

Alternately, you can press the P.SIZE button on the remote control repeatedly to

change the picture size.

16:9 Wide Zoom Zoom 4:3

Just Scan

16:9 Wide Zoom Zoom 4:3

Just Scan

SizeTV

Move Enter Return

SizeTV

▲

Move Enter Return

Reset

16:9 Sets the picture to 16:9 wide mode.

4:3 Sets the picture to 4:3 normal mode.

Wide Zoom Magnify the size of the picture more

than 4:3.

Just Scan Use the function to see the full

image without any cutoff when HDMI (720p/1080i/1080p), Component (1080i/1080p) signals are input.

English - 22

Zoom The screen size when Wide screen is

vertically enlarged.

Digital Noise Reduction

If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen.

1. Follow the “Activating Picture Options” instructions numbers 1 and 2. (Refer to page 21)

Press the ▲ or ▼ button to select "Digital NR", then press the ENTER button.

3. Press the ▲ or ▼ button to select "Off", "Low", "Medium", "High" or "Auto".

Press the ENTER button.

 Off: Turns the screen noise reduction function off.  Low: Reduces screen noise at a low level.  Medium: Reduces screen noise at a medium level.  High: Reduces screen noise at a high level.  Auto: Automatically recognizes and reduces screen noise.

Press the EXIT button to exit.

DNIe (Digital Natural Image engine)

This TV includes the DNIe function to provide high visual quality. If you set DNIe to on, you can view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the applied DNIe and normal pictures on the screen, for demonstration purposes. Using this function, you can view the difference in the visual quality.

1. Follow the “Activating Picture Options” instructions numbers 1 and 2. (Refer to page 21)

2. Press the ▲ or ▼ button to select "DNIe", then press the ENTER

3. Press the ▲ or ▼ button to select "Off", "Demo" or "On", then press the ENTER

button.

• Off: Switches off the "DNIe" mode.

• Demo: The screen before applying DNIe appears on the right screen after

applying DNIe appears on the left.

• On: Switches on the "DNIe" mode.

Press the EXIT button to exit.

DNIe™ (Digital Natural Image engine)

➣

This feature brings you a more detailed image with 3D noise reduction and detailed, contrast and white enhancement. “DNIe” is only available in “Dynamic” mode.

➣

ColorTone :Normal ► Size :16:9 ► DigitalNR :Auto ►

DNle :Off ► HDMIBlackLevel :Normal ►

Movie Plus

BlueOnlyMode :Off ►

Color Tone : Normal Size : 16:9

Digital NR : Auto

DNle : Off HDMI Black Level : Normal

Movie Plus Blue Only Mode : Off

ColorTone :Cool1 ► Size :16:9 ► DigitalNR :Auto ► DNle :On ►

HDMIBlackLevel :Normal ►

Movie Plus

BlueOnlyMode :Off ►

Color Tone : Cool1 Size : 16:9 Digital NR : Auto

DNle : On

HDMI Black Level : Low

Movie Plus

Blue Only Mode : Off

Picture OptionsTV

 :Low ►

Move Enter Return

Picture OptionsTV

Off

Low

Medium

: Low

Move Enter Return

 :Low ►

Move Enter Return

: Low

Move Enter Return

High

Auto

Picture OptionsTV

Off

Demo

Setting the HDMI Black Level

You can select the black level on the screen to adjust the screen depth.

1. Follow the “Activating Picture Options” instructions numbers 1 and 2. (Refer to page 21)

2. Press the

▲ or ▼

button to select “HDMI Black Level”, then

press the ENTER button.

3. Press the

▲ or ▼

button to select “Normal” or “Low”, then press

the ENTER button.

• Normal: The screen gets brighter.

• Low: The screen gets darker.

➣

This function is active only when the external input connects to HDMI (RGB signals). “HDMI Black Level” function may not be compatible with or external devices.

Press the EXIT button to exit.

English - 23

ColorTone :Normal ► Size :16:9 ► DigitalNR :Auto ►

DNle :Off ►

HDMIBlackLevel :Normal ►

Movie Plus

BlueOnlyMode :Off ►

Color Tone : Normal Size : 16:9 Digital NR : Auto

DNle : On

HDMI Black Level : Low

Movie Plus Blue Only Mode : Off

Picture OptionsTV

 :Low ►

Move Enter Return

Picture OptionsTV

Normal

: Low

Move Enter Return

Low

Setting the Movie Plus

The TV can be set to automatically sense and process film signals from all sources and adjust the picture for optimum quality.

Follow the “Activating Picture Options” instructions numbers 1 and 2.

(Refer to page 21)

Press the ▲ or ▼ button to select “Movie Plus”, then press the ENTER button.

3. Press the ▲ or ▼ button to select “Off”, “Low”, “Medium”, “High” or “Demo”, then

press the ENTER button. Press the EXIT button to exit.

➣

This function is not available in “Wide Zoom” and “Zoom” modes.

➣

It is not supported in HDMI1080p/24Hz, 25Hz, 30Hz mode.

Setting the Blue Only Mode

This function is for AV device measurement experts. This function displays the blue signal only by removing the red and green signals from the video signal so as to provide a Blue Filter effect that is used to adjust the Color and Tint of video equipment such as DVD players, Home Theaters, etc. Using this function, you can adjust the Color and Tint to preferred values appropriate to the signal level of each video device using the Red/Green/Blue/Cyan/Magenta/Yellow Color Bar Patterns, without using an additional Blue Filter.

1. Follow the “Activating Picture Options” instructions numbers 1 and 2. (Refer to page 21).

button.

2. Press the ▲ or ▼ button to select "Blue Only Mode", then press the ENTER

3. Press the ▲ or ▼ button to select "Off" or "On", then press the ENTER

Press the

EXIT button to exit.

“Blue Only Mode” is available when the picture mode is set to “Movie” or

“Standard”.

ColorTone :Normal ► Size :16:9 ► DigitalNR :Auto ►

DNle :Off ► HDMIBlackLevel :Normal ►

Movie Plus

BlueOnlyMode :Off ►

Color Tone : Normal Size : 16:9 Digital NR : Auto

DNle : Off HDMI Black Level : Normal

Movie Plus

Blue Only Mode : Off

Color Tone :Normal ►

Size :16:9 ► DigitalNR :Auto ►

DNle :Off ► HDMIBlackLevel :Normal ►

Movie Plus

BlueOnlyMode :Off ►

Color Tone : Normal Size : 16:9 Digital NR : Auto

DNle : Off HDMI Black Level : Normal

Movie Plus Blue Only Mode : Off

Picture OptionsTV

 :Low ►

Move Enter Return

Picture OptionsTV

Off

Low

Medium

: Low

Move Enter Return

 :Low ►

Move Enter Return

: Low

Move Enter Return

High

Demo

Picture OptionsTV

Off

Resetting the Picture Settings to the Factory Defaults

1. Press the MENU button to display the menu.

Press the ENTER button, to select “Picture”.

Press the ▲ or ▼ button to select "Reset", then press the ENTER button.

Press the ▲ or ▼ button to select “OK” or “Cancel” then press the ENTER button.

Press the EXIT button to exit. Each mode can be reset.

English - 24

▲More

Picture Options

Reset : OK

PictureTV

Move Enter Return

Cancel

Viewing Picture-in-Picture

You can use the PIP feature to simultaneously watch two video sources. (See page 30 to select the PIP picture sound.) This product has one built-in tuner, which does not allow PIP to function in the same mode. Please see ‘PIP Settings’ below for details.

Activating Picture-in-Picture

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. Press the ▲ or ▼ button to select “PIP”, then press the ENTER button.

2. Press the ENTER button again.

Press the ▲ or ▼ button to select “On”, then press the ENTER button.

➣

If you turn the TV off while watching in PIP mode and turn it on again, the PIP window will disappear.

➣

You can view Analog TV broadcasts on the PIP screen (sub-picture) when the main picture is from an external device connected to HDMI1, HDMI2, HDMI3, HDMI4, Component1, 2 or PC.

➣

PIP Settings

Main picture Sub picture

Component 1, 2 HDMI1, HDMI2, HDMI3, HDMI4PCTV, AV1, AV2

Selecting a Signal Source (External A/V) for PIP

3. Press the ▲ or ▼ button to select “Source”, then press the ENTER button.

Select the source of the sub picture (PIP) by pressing the ▲ or ▼ button and press

the ENTER button.

The sub picture can serve different source selections based on what the main

➣

picture is set to.

Play&Play  ►

Language :English ► Time  ►

Caption  ►

ExternalSettings  ► Entertainment :Off ► EnergySaving :Off ►

AVColorSystem :Auto ►

PIP  ►

PIP : Off

Source : TV Size :

Position : Channel : Air 4

PIP : On

Source : TV

Size : Position : Channel : Air 4

SetupTV

Move Enter Return

PIPTV

Off

Move Enter Return

PIPTV

AV1 AV2

Changing the Size of the PIP Window

4. Press the ▲ or ▼ button to select “Size”, then press the ENTER button. Press the ▲ or ▼ button to select the required option, then press the ENTER

button.

➣

You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke.

➣

"Size" is only available if main picture is in HDMI mode.

• You can adjust picture position only by using the

size menu.

English - 25

Move Enter Return

PIP : On Source : TV

Size :

Position : Channel : Air 4

Move Enter Return

PIPTV

Changing the Position of the PIP Window

5. Press the ▲ or ▼ button to select “Position”, then press the ENTER button. Press the ▲ or ▼ button to select the required option, then press the ENTER

button.

➣

In Double Window ( selected.

) and Double Wide ( ) modes, “Position” cannot be

PIP : On Source : TV

Size :

Position :

Channel : Air 4

Move Enter Return

PIPTV

Changing the PIP Channel

6. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. Press the ▲ or ▼ button to select the desired channel in the PIP window.

Press the EXIT button to exit.

➣

The channel can be active when the sub picture is set to TV.

Easy Setting

1. Press the TOOLS button on the remote control.

Press the ▲ or ▼ button to select “PIP”, then press the ENTER button.

3. Press the ▲ or ▼ button to select a particular item.

4. Press the ◄ or ► button to select the required option.

5. Press the EXIT or TOOLS button to exit.

Tools

PIP

PIPTV

▲

▼

PIP : On Source : TV

Size : Position :

Channel : Air 4: Air 4

Move Enter Return

Anynet+ (HDMI-CEC) Picture Mode : Standard Sound Mode : Custom Sleep Timer : Off SRS TS XT : Off Energy Saving : Off

PIP

Move Enter Exit

PIP ◄ On ►

Source : TV Channel : Air 4 Size : Position :

Move Adjust Return

English - 26

Sound Control

Changing the Sound Standard

You can select the sound mode to best suit the programming you’re watching.

1. Press the MENU button to display the menu.

Press the

2. Press the ENTER

Press the ▲ or ▼ button to select “Standard”, “Music”, “Movie”, “Speech”, or

“Custom” sound setting, then press the ENTER button.

Press the EXIT button to exit.

• Standard: selects the normal sound mode.

• Music: emphasizes music over voices.

• Movie: provides the best sound for movies.

• Speech: emphasizes voice over other sounds.

• Custom: recalls your customized sound settings.

▲ or ▼

button to select "Sound", then press the ENTER button.

button to select "Mode".

(see “Customizing the Sound”)

Mode :Custom ►

Equalizer ► SRS TS XT : Off ►

MTS :Stereo ► Auto Volume : Off ► TVSpeaker :On ►

SoundSelect :Main ►

Mode : Custom

Equalizer SRS TS XT : Off MTS : Stereo Auto Volume : Off TV Speaker : On

Sound Select : Main

SoundTV

Move Enter Return

SoundTV

Standard

Music Movie

Speech

Custom

Move Enter Return

Easy Setting

1. Press the TOOLS button on the remote control.

Press the ▲ or ▼ button to select “Sound Mode”.

3. Press the ◄ or ► button to select the desired sound mode.

4. Press the EXIT or TOOLS button to exit.

Customizing the Sound

The sound settings can be adjusted to suit your personal preference.

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Sound", then press the ENTER button.

2. Press the ▲ or ▼ button to select "Equalizer", then press the ENTER

3. Press the ◄ or ► button to select a particular frequency to adjust.

Press the ▲ or ▼ button to increase or decrease the level of the particular frequency.

Press the EXIT button to exit.

• L/R Sound Balance Adjustment: To adjust the sound balance of the L/R

speakers.

• Bandwidth Adjustment (100Hz, 300Hz, 1kHz, 3kHz, 10kHz): To adjust the

level of different bandwidth frequencies.

If you make any changes to the "Equalizer" settings, the sound mode is

automatically switched to the "Custom" mode.

button.

Anynet+ (HDMI-CEC) Picture Mode : Standard

Sound Mode ◄ Custom ►

Sleep Timer : Off SRS TS XT : Off Energy Saving : Off MTS : Stereo

Move Adjust Exit

Tools

Mode :Custom ►

Equalizer ► SRS TS XT : Off ►

MTS :Stereo ►

Auto Volume : Off ► TV Speaker : On ►

SoundSelect :Main ►

Move Adjust Return

SoundTV

Move Enter Return

EqualizerTV

100Hz

300Hz 1kHz 3kHz 10kHzBalance

English - 27

Setting the TruSurround XT (SRS TS XT)

TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats.

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Sound", then press the ENTER button.

2. Press the ▲ or ▼ button to select "SRS TS XT", then press the

ENTER button.

3. Press the ▲ or ▼ button to select "Off" or "On", then press the ENTER

button.

Press the EXIT button to exit.

TruSurround XT, SRS and Symbol are trademarks of SRS Labs, Inc.

TruSurround XT technology is incorporated under license from SRS Labs, Inc.

Easy Setting

1. Press the TOOLS button on the remote control.

Press the ▲ or ▼ button to select “SRS TS XT”.

3. Press the ◄ or ► button to select the “Off” or “On”.

4. Press the EXIT or TOOLS button to exit.

Mode :Custom ►

Equalizer ► SRS TS XT : Off ►

MTS :Stereo ►

Auto Volume : Off ► TV Speaker : On ►

SoundSelect :Main ►

Mode : Custom Equalizer

SRS TS XT : Off

MTS : Stereo Auto Volume : Off TV Speaker : On

Sound Select : Main

Anynet+ (HDMI-CEC) Picture Mode : Standard Sound Mode : Custom Sleep Timer : Off

SRS TS XT ◄ Off ►

Energy Saving : Off MTS : Mono

Move Adjust Exit

SoundTV

Move Enter Return

SoundTV

Off

Move Enter Return

Tools

Choosing a Multi-Channel Sound (MTS) track

Depending on the particular program being broadcast, you can listen to “Mono”, “Stereo” or “SAP”.

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Sound", then press the ENTER button.

2. Press the ▲ or ▼ button to select "MTS", then press the ENTER

3. Press the ▲ or ▼ button to select a setting you want, then press the ENTER

Press the EXIT button to exit.

• Mono: Choose for channels that are broadcasting in mono or if you are having

difficulty receiving a stereo signal.

• Stereo: Choose for channels that are broadcasting in stereo.

• SAP: Choose to listen to the Separate Audio Program, which is usually a

foreign-language translation.

“MTS” is available only in TV mode. Depending on the particular program being broadcast, you can listen to “Mono”,

“Stereo” or “SAP”.

Press the MTS button on the remote control repeatedly to select “Mono”,

“Stereo” or “SAP”.

Easy Setting

1. Press the TOOLS button on the remote control.

Press the ▲ or ▼ button to select “MTS”.

3. Press the ◄ or ► button to select the “Stereo”, “SAP” or “Mono”.

4. Press the EXIT or TOOLS button to exit.

English - 28

button.

Anynet+ (HDMI-CEC) Picture Mode : Standard Sound Mode : Custom Sleep Timer : Off SRS TS XT : Off Energy Saving : Off

MTS ◄ Stereo ►

Mode :Custom ►

Equalizer ► SRS TS XT : Off ►

MTS :Stereo ►

Auto Volume : Off ► TV Speaker : On ►

SoundSelect :Main ►

Mode : Custom Equalizer SRS TS XT : Off

MTS : Stereo

Auto Volume : Off TV Speaker : On

Sound Select : Main

Move Adjust Exit

SoundTV

Move Enter Return

SoundTV

Mono

Stereo

SAP

Move Enter Return

Tools

+ 100 hidden pages