SAMSUNG LN26D450G1G, LN26D450G1M, LN32D450G1G, LN32D450G1M Service Manual

LCD-TV

LN32D430G3DXZX

EL9

VERDADERO

LN32D430G3DXZX

Chassis : U61A Model : LN26D450G1G

LN26D450G1M LN32D450G1G LN32D450G1M

Manual

SERVICE

TFT-LCD TV Contents

1. Precautions

2. Product specications

3. Disassembly and Reassembly

4. Troubleshooting

5. Wiring Diagram

Front Design : ToC Red Black Stand : Round

LN**D450G1G_M

Contents

1. Precautions .............................................................................................................. 1-1

1-1. Safety Precautions ......................................................................................................... 1-1

1-2. Servicing Precautions ..................................................................................................... 1-2

1-3. Electrostatically Sensitive Devices (ESD) Precautions .................................................. 1-2

1-4. Installation Precautions .................................................................................................. 1-3

2. Product specications ............................................................................................ 2-1

2-1. Model Comparison ......................................................................................................... 2-1

2-2. Feature & Specications ................................................................................................. 2-2

2-3. Specication Comparison to Old Models ........................................................................2-6

2-4. Detail Factory Option ...................................................................................................... 2-7

2-5. Media Play ...................................................................................................................... 2-8

2-6. Accessories .................................................................................................................. 2-11

3. Disassembly and Reassembly ............................................................................... 3-1

3-1. Disassembly and Reassembly ....................................................................................... 3-1

3-2. Stand assembly .............................................................................................................. 3-5

4. Troubleshooting ...................................................................................................... 4-1

4-1. Troubleshooting .............................................................................................................. 4-1

4-2. Function ........................................................................................................................ 4-24

4-3. Factory Mode Adjustments ........................................................................................... 4-25

4-4. White Balance - Calibration .......................................................................................... 4-37

4-5. Servicing Information .................................................................................................... 4-40

4-6. Software Upgrade ......................................................................................................... 4-41

4-7. Rear Cover Dimension ................................................................................................. 4-42

5. Wiring Diagram ........................................................................................................ 5-1

5-1. Wiring Diagram ............................................................................................................... 5-1

5-2. Connector ....................................................................................................................... 5-2

5-3. Connector Functions ...................................................................................................... 5-4

5-4. Cables ............................................................................................................................ 5-4

This Service Manual is a property of Samsung Electronics Co.,Ltd.

Any unauthorized use of Manual can be punished under applicable International and/or domestic law.

Printed in Korea

1. Precautions

1-1. Safety Precautions

Follow these safety, servicing and ESD precautions to prevent damage and to protect against potential hazards such as electrical shock.

1-1-1. Warnings

For continued safety, do not attempt to modify the circuit board.1.

Disconnect the AC power and DC power jack before servicing.2.

1-1-2. Servicing the LCD TV

When servicing the LCD TV, Disconnect the AC line cord from the AC outlet.1.

It is essential that service technicians have an accurate voltage meter available at all times. 2. Check the calibration of this meter periodically.

1-1-3. Fire and Shock Hazard

Before returning the LCD TV to the user, perform the following safety checks:

Inspect each lead dress to make certain that the leads are not pinched or that hardware is not lodged between the 1. chassis and other metal parts in the LCD TV.

Inspect all protective devices such as nonmetallic control knobs, insulating materials, cabinet backs, adjustment and 2. compartment covers or shields, isolation resistorcapacitor networks, mechanical insulators, etc.

Leakage Current Hot Check (Figure 1-1): 3. WARNING : Do not use an isolation transformer during this test. Use a leakage current tester or a metering system that complies with American National Standards Institute (ANSI C101.1, Leakage Current for Appliances), and Underwriters Laboratories (UL Publication UL1410, 59.7).

(READING SHOULD) NOT BE ABOVE 0.5mA

DEVICE UNDER TEST

2-WIRE CORD

*ALSO TEST WITH

PLUG REVERSED (USING AC ADAPTER PLUG AS REQUIRED)

TEST ALL

EXPOSED METAL

SURFACES

LEAKAGE CURRENT TESTER

EARTH

GROUND

Figure 1-1. Leakage Current Test Circuit

With the unit completely reassembled, plug the AC line cord directly into a 120V AC outlet. With the unit’s AC switch 4.

rst in the ON position and then OFF, measure the current between a known earth ground (metal water pipe, conduit,

etc.) and all exposed metal parts, including: metal cabinets, screwheads and control shafts. The current measured should not exceed 0.5 milliamp. Reverse the power-plug prongs in the AC outlet and repeat the test.

1-1-4. Product Safety Notices

Some electrical and mechanical parts have special safetyrelated characteristics which are often not evident from visual inspection. The protection they give may not be obtained by replacing them with components rated for higher voltage, wattage, etc. Parts that have special safety characteristics are identied by on schematics and parts lists. A substitute replacement that does not have the same safety characteristics as the recommended replacement part might create

shock, re and / or other hazards. Product safety is under review continuously and new instructions are issued whenever

appropriate.

1-1

1-2

1. Precautions

1-2. Servicing Precautions

WARNING: An electrolytic capacitor installed with the wrong polarity might explode. Caution: Before servicing units covered by this service manual, read and follow the Safety Precautions section of this

manual.

Note: If unforeseen circumstances create conict between the following servicing precautions and any of the safety

precautions, always follow the safety precautions.

1-2-1. General Servicing Precautions

Always unplug the unit’s AC power cord from the AC power source and disconnect the DC Power Jack before 1. attempting to: (a) remove or reinstall any component or assembly, (b) disconnect PCB plugs or connectors, (c) connect a test component in parallel with an electrolytic capacitor.

Some components are raised above the printed circuit board for safety. An insulation tube or tape is sometimes 2. used. The internal wiring is sometimes clamped to prevent contact with thermally hot components. Reinstall all such elements to their original position.

After servicing, always check that the screws, components and wiring have been correctly reinstalled. Make sure that 3. the area around the serviced part has not been damaged.

Check the insulation between the blades of the AC plug and accessible conductive parts (examples: metal panels, 4. input terminals and earphone jacks).

Insulation Checking Procedure: Disconnect the power cord from the AC source and turn the power switch ON. 5. Connect an insulation resistance meter (500 V) to theblades of the AC plug. The insulation resistance between each blade of the AC plug and accessible conductive parts (see above) should be greater than 1 megohm.

Always connect a test instrument’s ground lead to the instrument chassis ground before connecting the positive lead; 6. always remove the instrument’s ground lead last.

1-3. Electrostatically Sensitive Devices (ESD) Precautions

Some semiconductor (solid state) devices can be easily damaged by static electricity. Such components are commonly

called Electrostatically Sensitive Devices (ESD). Examples of typical ESD are integrated circuits and some eld-effect

transistors. The following techniques will reduce the incidence of component damage caused by static electricity.

Immediately before handling any semiconductor components or assemblies, drain the electrostatic charge from your 1. body by touching a known earth ground. Alternatively, wear a discharging wrist-strap device. To avoid a shock hazard, be sure to remove the wrist strap before applying power to the LCD TV.

After removing an ESD-equipped assembly, place it on a conductive surface such as aluminum foil to prevent 2. accumulation of an electrostatic charge.

Do not use freon-propelled chemicals. These can generate electrical charges sufcient to damage ESDs.3.

Use only a grounded-tip soldering iron to solder or desolder ESDs.4.

Use only an anti-static solder removal device. Some solder removal devices not classied as “anti-static” can generate 5. electrical charges sufcient to damage ESDs.

Do not remove a replacement ESD from its protective package until you are ready to install it. Most replacement ESDs 6.

are packaged with leads that are electrically shorted together by conductive foam, aluminum foil or other conductive materials.

Immediately before removing the protective material from the leads of a replacement ESD, touch the protective 7. material to the chassis or circuit assembly into which the device will be installed. Caution: Be sure no power is applied to the chassis or circuit and observe all other safety precautions.

Minimize body motions when handling unpackaged replacement ESDs. Motions such as brushing clothes together, 8. or lifting your foot from a carpeted oor can generate enough static electricity to damage an ESD.

1-3

1. Precautions

1-4. Installation Precautions

For safety reasons, more than a people are required for carrying the product.1.

Keep the power cord away from any heat emitting devices, as a melted covering may cause re or electric shock.2.

Do not place the product in areas with poor ventilation such as a bookshelf or closet. The increased internal 3.

temperature may cause re.

Bend the external antenna cable when connecting it to the product. This is a measure to protect it from being exposed 4.

to moisture. Otherwise, it may cause a re or electric shock.

Make sure to turn the power off and unplug the power cord from the outlet before repositioning the product. Also check 5. the antenna cable or the external connectors if they are fully unplugged. Damage to the cord may cause re or electric

shock.

Keep the antenna far away from any high-voltage cables and install it rmly. Contact with the highvoltage cable or the 6. antenna falling over may cause re or electric shock.

When installing the product, leave enough space (0.4 m) between the product and the wall for ventilation purposes. 7.

A rise in temperature within the product may cause re.

2. Product specications

2-1. Model Comparison

Model Inch LD450

2. Product specications

Front View

Detail View

Front Color All ToC RED Black

26"

Dimensions W x D x H

32"

26"

Weight

32"

All

With Stand 660.7 x 222.1 x 482.8 (mm) / 26 x 8.7 x 19 (inch)

Without Stand 660.7 x 78.6 x 435 (mm) / 26 x 3.1 x 17.1 (inch)

With Stand 795.5 x 251.7 x 571.1 (mm) / 31.3 x 9.9 x 22.5 (inch)

Without Stand 795.5 x 80.4 x 510.3 (mm) / 31.3 x 3.2 x 20.1 (inch)

With Stand 6.71 (kg) / 14.8 (lbs)

Without Stand 6.24 (kg) / 13.8 (lbs)

With Stand 10.85 (kg) / 23.9 (lbs)

Without Stand 8.6 (kg) / 19 (lbs)

Speaker Output All Anti Glear

Antenna All None

HDMI

DLNA All Media Play (MOVIE), HDD

All

384 Mbtye

2-1

2-2

2. Product specications

2-2. Feature & Specications

Model LN26D450G1G (HD)

Digital-TV, RF, 2-HDMI, 2-Component, 2-A/V, 1-USB2.0, D-SUB ሪ

Brightness: 400 cd/m ሪ

High Contrast Ratio : 4,500:1 ሪ

Response Time: 8.5 ms ሪ

Item Description

LCD Panel 26 inch HD 60 Hz

Feature

Specications

Scanning Frequency

Horizontal: 60 KHz ~ 73 KHz (Automatic)

Vertical: 47 Hz ~ 63 Hz (Automatic)

Display Colors 16.7 M colors

Maximum Resolution

Input Signal

Horizontal: 1366 Pixels

Vertical: 768 Pixels

Analog 0.7 Vp-p ± 5 % positive at 75 Ω, internally terminated

Input Sync Signal H/V Separate, TTL, P. or N.

Maximum Pixel Clock Rate 74.25 MHz

Active Display Horizontal / Vertical

575.8 (H) x 323.7 (V) (mm) / 22.7 (H) x 12.7 (V) (inch)

AC power voltage & Frequency AC 110 V ~ 120 V, 60 Hz

Power Consumption Under 85 W (Under 0.3 W, Stand by)

Dimensions Set (W x D x H)

Weight

With Stand 660.7 x 222.1 x 482.8 (mm) / 26 x 8.7 x 19 (inch)

Without Stand 660.7 x 78.6 x 435 (mm) / 26 x 3.1 x 17.1 (inch)

With Stand 6.71 (kg) / 14.8 (lbs)

Without Stand 6.24 (kg) / 13.8 (lbs)

Tuning Frequency Synthesize (Refer to detailed Frequency Table)

TV System

System ISDB-T, PAL-M / NTSC / PAL-N

Sound NTSC-M, Dolby Digital+

Operating Temperature: 32˚F ~ 122˚F (0˚C ~ 50˚C)

Environmental Considerations

Operating Humidity: 20 % ~ 90 %

Storage temperature: -4˚F ~ 140˚F (-20˚C ~ 60˚C)

Storage Humidity: 10 % ~ 90 %

MAX Internal Audio Output Power: Each 3 W (Left / Right) -

Audio spec

Equalizer: 5 band -

Output Frequency: RF: 20 Hz ~ 15.4 KHz -

AV / Componet / HDMI: 20 Hz ~ 20 KHz

Note: Dolby Digital+, Game Mode, Film Mode, Energy Saving, Anynet

2-3

2. Product specications

Model LN26D450G1M (HD)

Digital-TV, RF, 2-HDMI, 2-Component, 2-A/V, 1-USB2.0, D-SUB ሪ

Brightness: 400 cd/m ሪ

High Contrast Ratio: 4,500:1 ሪ

Response Time: 8.5 ms ሪ

Item Description

LCD Panel 26 inch HD 60 Hz

Feature

Specications

Scanning Frequency

Horizontal: 60 KHz ~ 73 KHz (Automatic)

Vertical: 47 Hz ~ 63 Hz (Automatic)

Display Colors 16.7 M colors

Maximum Resolution

Horizontal: 1366 Pixels

Vertical: 768 Pixels

Input Signal Analog 0.7 Vp-p ± 5 % positive at 75 Ω, internally terminated

Input Sync Signal H/V Separate, TTL, P. or N.

Maximum Pixel Clock Rate 74.25 MHz

Active Display Horizontal / Vertical

575.8 (H) x 323.7 (V) (mm) / 22.7 (H) x 12.7 (V) (inch)

AC power voltage & Frequency AC 110 V ~ 120 V, 60 Hz

Power Consumption Under 85 W (Under 0.3 W, Stand by)

Dimensions Set (W x D x H)

Weight

With Stand 660.7 x 222.1 x 482.8 (mm) / 26 x 8.7 x 19 (inch)

Without Stand 660.7 x 78.6 x 435 (mm) / 26 x 3.1 x 17.1 (inch)

With Stand 6.71 (kg) / 14.8 (lbs)

Without Stand 6.24 (kg) / 13.8 (lbs)

Tuning Frequency Synthesize (Refer to detailed Frequency Table)

TV System

System DVB-T, PAL-N, M

Sound NTSC-M, Dolby Digital+

Operating Temperature: 32˚F ~ 122˚F (0˚C ~ 50˚C)

Environmental Considerations

Operating Humidity: 20 % ~ 90 %

Storage temperature: -4˚F ~ 140˚F (-20˚C ~ 60˚C)

Storage Humidity: 10 % ~ 90 %

MAX Internal Audio Output Power: Each 3 W (Left / Right) -

Audio spec

Equalizer: 5 band -

Output Frequency: RF: 20 Hz ~ 15.4 KHz -

AV / Componet / HDMI : 20 Hz ~ 20 KHz

Note: Dolby Digital+, Game Mode, Film Mode, Energy Saving, Anynet

2-4

2. Product specications

Model LN32D450G1G (HD)

Digital-TV, RF, 2-HDMI, 2-Component, 2-A/V, 1-USB2.0, D-SUB ሪ

Brightness: 400 cd/m ሪ

High Contrast Ratio: 4,000:1 ሪ

Response Time: 8.5 ms ሪ

Item Description

LCD Panel 32 inch HD 60 Hz

Feature

Specications

Scanning Frequency

Horizontal: 60 KHz ~ 73 KHz (Automatic)

Vertical: 47 Hz ~ 63 Hz (Automatic)

Display Colors 16.7 M colors

Maximum Resolution

Horizontal: 1366 Pixels

Vertical: 768 Pixels

Input Signal Analog 0.7 Vp-p ± 5 % positive at 75 Ω, internally terminated

Input Sync Signal H/V Separate, TTL, P. or N.

Maximum Pixel Clock Rate 74.25 MHz

Active Display Horizontal / Vertical

697.7 (H) x 392.3 (V) (mm) / 27.5 (H) x 15.4 (V) (inch)

AC power voltage & Frequency AC 110 V ~ 120 V, 60 Hz

Power Consumption Under 110 W (Under 0.3 W, Stand by)

Dimensions Set (W x D x H)

Weight

With Stand 795.5 x 251.7 x 571.1 (mm) / 31.3 x 9.9 x 22.5 (inch)

Without Stand 795.5 x 80.4 x 510.3 (mm) / 31.3 x 3.2 x 20.1 (inch)

With Stand 10.85 (kg) / 23.9 (lbs)

Without Stand 8.6 (kg) / 19 (lbs)

Tuning Frequency Synthesize (Refer to detailed Frequency Table)

TV System

System ISDB-T, PAL-M / NTSC / PAL-N

Sound NTSC-M, Dolby Digital+

Operating Temperature: 32˚F ~ 122˚F (0˚C ~ 50˚C)

Environmental Considerations

Operating Humidity: 20 % ~ 90 %

Storage temperature: -4˚F ~ 140˚F (-20˚C ~ 60˚C)

Storage Humidity: 10 % ~ 90 %

MAX Internal Audio Output Power: Each 3 W (Left / Right) -

Audio spec

Equalizer: 5 band -

Output Frequency: RF: 20 Hz ~ 15.4 KHz -

AV / Componet / HDMI: 20 Hz ~ 20 KHz

Note: Dolby Digital+, Game Mode, Film Mode, Energy Saving, Anynet

2-5

2. Product specications

Model LN32D450G1M (HD)

Digital-TV, RF, 2-HDMI, 2-Component, 2-A/V, 1-USB2.0, D-SUB ሪ

Brightness: 400 cd/m ሪ

High Contrast Ratio: 4,000:1 ሪ

Response Time: 8.5 ms ሪ

Item Description

LCD Panel 32 inch HD 60 Hz

Feature

Specications

Scanning Frequency

Horizontal: 60 KHz ~ 73 KHz (Automatic)

Vertical: 47 Hz ~ 63 Hz (Automatic)

Display Colors 16.7 M colors

Maximum Resolution

Horizontal: 1366 Pixels

Vertical: 768 Pixels

Input Signal Analog 0.7 Vp-p ± 5 % positive at 75 Ω, internally terminated

Input Sync Signal H/V Separate, TTL, P. or N.

Maximum Pixel Clock Rate 74.25 MHz

Active Display Horizontal / Vertical

697.7 (H) x 392.3 (V) (mm) / 27.5 (H) x 15.4 (V) (inch)

AC power voltage & Frequency AC 110 V ~ 120 V, 60 Hz

Power Consumption Under 110 W (Under 0.3 W, Stand by)

Dimensions Set (W x D x H)

Weight

With Stand 795.5 x 251.7 x 571.1 (mm) / 31.3 x 9.9 x 22.5 (inch)

Without Stand 795.5 x 80.4 x 510.3 (mm) / 31.3 x 3.2 x 20.1 (inch)

With Stand 10.85 (kg) / 23.9 (lbs)

Without Stand 8.6 (kg) / 19 (lbs)

Tuning Frequency Synthesize (Refer to detailed Frequency Table)

TV System

System DVB-T, PAL-N, M

Sound NTSC-M, Dolby Digital+

Operating Temperature: 32˚F ~ 122˚F (0˚C ~ 50˚C)

Environmental Considerations

Operating Humidity: 20 % ~ 90 %

Storage temperature: -4˚F ~ 140˚F (-20˚C ~ 60˚C)

Storage Humidity: 10 % ~ 90 %

MAX Internal Audio Output Power: Each 3 W (Left / Right) -

Audio spec.

Equalizer: 5 band -

Output Frequency: RF: 20 Hz ~ 15.4 KHz -

AV / Componet / HDMI: 20 Hz ~ 20 KHz

Note: Dolby Digital+, Game Mode, Film Mode, Energy Saving, Anynet

2-6

2. Product specications

2-3. Specication Comparison to Old Models

Model

LD4G (HD)

LN**D450G1G_M

LN**C4*0E*M / LN**C530F1M / LN**C550J1M

LC4E / LC5F / LC5K

Design

Display Type LCD TV LCD TV

Built-in Tuner O O

Resolution 1366 X 768 1366 X 768

LCD Panel TFT LCD Panel 60 Hz TFT LCD Panel 60 Hz

Screen Size 26" / 32" 26" / 32" / 37" / 40"

Picture ratio 16 : 9 16 : 9

Power Consumption

Dimensions (W x H x D)

Weight

Brightness

Contrast Ratio

26" Under 85 W (Under 0.3 W, Stand by) 26"

32" Under 110 W (Under 0.3 W, Stand by) 32"

With Stand 26 x 8.7 x 19 (inch)

26"

Without Stand 26 x 3.1 x 17.1 (inch) Without Stand

With Stand 31.3 x 9.9 x 22.5 (inch)

32"

Without Stand 31.3 x 3.2 x 20.1 (inch) Without Stand

With Stand 14.8 (lbs)

26"

Without Stand 13.8 (lbs) Without Stand

With Stand 23.9 (lbs)

32"

Without Stand 19 (lbs) Without Stand

26" 400 (spec) 26"

32" 400 (spec) 32"

26" 4,500 (spec) 26"

32" 4,000 (spec) 32"

Under 90 W (Under 0.3 W, Stand by)

Under 120 W (Under 0.3 W, Stand by)

With Stand

26"

With Stand

32"

With Stand

26"

With Stand

32"

450 (spec) / 450(marketing) Cd/m

3,000 (spec) / 4,000:1 (marketing)

3,500 (spec) / 6,000:1 (marketing)

25.5 x 8.8 x 18.7 (inch)

25.5 x 3 x 17 (inch)

26 x 9.7 x 22.8 (inch)

25.5 x 3 x 20.2 (inch)

14.7 (lbs)

13.8 (lbs)

20.3 (lbs)

19 (lbs)

Picture Enhacer HyperReal Engine (X5) HyperReal Engine (X4)

Equalizer 5 Band 5 Band

Auto Volume Control O O

Surround Sound Dolby Digital Plus Dolby Digital Plus / Pulse

Speaker Output 10 W + 10 W 10 W + 10 W

PIP O O

Double Window X X

Caption O O

Entertainment Mode X X

Game Mode O O

Energy Saving O O

Anynet+

Antena

O O

2 (Cable / Air) 2 (Cable / Air)

2-7

2. Product specications

2-4. Detail Factory Option

If you replace the main board with new one, please change the factory option as well. The options you must change ※ are “Type”.

Model Name LN26D450G1G LN32D450G1G LN26D450G1M LN32D450G1M

Vendor AML CMI AML AML

Panel

SMPS PD Board BN44-00438A BN44-00438A BN44-00438A BN44-00438B

Byte Item CHASSIS ASSY BN91-06406L BN91-06406P BN91-06406L BN91-06406P

1 Type 26A6AH0C 32L6AH0C 26A6AH0C 32A6AH0C

2 Local set BRA_DTV, COLOMBIA

3 Model LD450

4 Tuner Auto / SEMCO SEC_ISDB, SI_TW

5 Ch Table - NONE

6 Front Color ON / OFF T-R-BLK

FACTORY

Reset

CODE BN07-00985A BN07-00951A BN07-00985A BN07-00978A

SPEC LTF260AP05 CM31B5A LTF260AP05 LTF320AP11

PBA ASSY CODE BN94-04486A BN94-04487A BN94-04486A BN94-04487A

2-8

2. Product specications

2-5. Media Play

2-5-1. Using the Media Play Function

This function enables you to view and listen to photo (JPEG), audio les (MP3) and movie (MPEG) saved on a USB Mass Storage Class (MSC) device.

Press the POWER button on the remote control or front panel. The TV is powered on.1.

Connect a USB device containing JPEG and / or MP3 and or/MPEG les to the usb jack (USB jack) on the side of the 2. TV.

If you enter the Media Play mode with no USB device connected the message “No external storage device found. Check the connection status.” will appear. In this case, insert the USB device, exit the screen by pressing the MEDIA.P button on the remote control and enter the MEDIA.P screen again. MTP (Media Transfer Protocol) is not supported. Certain types of USB Digital camera and Audio devices may not be compatible with this TV. Media Play only supports USB Mass Storage Class devices (MSC). MSC is a Mass Storage Class Bulk-Only Transport device. Examples of MSC are Thumb drives and Flash Card Readers. Please connect directly to The USB port of your TV. If you are using a separate cable connection, there may be a USB Compatibility problem. Before connecting your device to The TV, Please back up your les to prevent them from damage or loss of data. SAMSUNG is not responsible for any data le damage or data loss. Do not disconnect The USB device while it is loading. MSC supports MP3 and JPEG les, while a PTP device supports JPEG les only. The sequential JPEG format is supported. Photo and Audio les must be named in English, French or Spanish. If not, the les can not be played. Change the le names to English, French or Spanish if necessary. The higher The resolution of The image, The longer it takes to display on the screen.

The maximum supported JPEG resolution is 15360 x 8640 pixels. For unsupported or corrupted les, The “Not supported File Format” message is displayed. Auto Chaptering function is supported.

Auto chaptering: When play movie, push enter key. you can see the snapshot of chapter, and you can skip to the ※ chapter using choice the snapshot.

2-9

2. Product specications

2-5-2 Supported Formats

Supported Subtitle Formats 

Name File extension Format

MPEG-4 time-based text .ttxt text

SAMI .smi HTML

SubRip .srt string-based

SubViewer .sub string-based

Micro DVD .sub or .txt string-based

Supported Video Formats 

File Container Video Codec Resolution

Divx 3.11 / 4.x / 5.1 / 6.0 1920 x 1080 6 ~ 30 8

*.avi

*.mkv

*.asf ASF

*.wmv ASF Window Media Video v9 1920 x 1080 6 ~ 30 25 WMA

*.mp4 MP4

*.3gp 3GPP

*.vro

*.mpg

*.mpeg

*.ts *.tp

*.trp

*.rmvb RMVB RV 3.0 / RV4.0 1920 x 1080 30 10 RealAudio 6.9.10

AVI

MKV

VRO VOB

H.264 BP / MP / HP 1920 x 1080 6 ~ 30 25

Divx 3.11 / 4.x / 5.1 / 6.0 1920 x 1080 6 ~ 30 8

H.264 BP / MP / HP 1920 x 1080 6 ~ 30 25

XviD 1920 x 1080 6 ~ 30 8

MPEG4 SP / ASP 1920 x 1080 6 ~ 30 8

Motion JPEG 640 x 480 6 ~ 30 8

Divx 4.x / 5.1 / 6.0 1920 x 1080 6 ~ 30 8

XviD 1920 x 1080 6 ~ 30 8

MPEG4 SP / ASP 1920 x 1080 6 ~ 30 8

Motion JPEG 640 x 480 6 ~ 30 25

MPEG4 SP / ASP 1920 x 1080 6 ~ 30 8

XVID 1920 x 1080 6 ~ 30 8

H.264 BP/MP / HP 1920 x 1080 6 ~ 30 25

MPEG4 SP / ASP 1920 x 1080 6 ~ 30 8

MPEG2 1920 x 1080 24 / 25 / 30 30

MPEG1 1920 x 1080 24 / 25 / 30 30

MPEG2 1920 x 1080 24 / 25 / 30 30

H.264 1920 x 1080 6 ~ 30 25

VC1 1920 x 1080 6 ~ 30 25

Frame rate

(fps)

Bit rate

(Mbps)

Audio Codec

MP3 / AC3 /

LPCM / ADPCM /

DTS Core

MP3 / AC3 / LPCM

/ ADPCM / WMA

MP3 / ADPCM /

AAC

ADPCM / AAC

AC3 / MPEG /

LPCM

AC3 / MPEG / LPCM /AAC

AC3 / AAC / MP3 /

DD+ / HE-AAC

2-10

2. Product specications

Other Restrictions 

NOTE ※

If there are problems with the contents of a codec, the codec will not be supported. -

If the information for a Container is incorrect and the le is in error, the Container will not be able to play xcorrectly. -

Sound or video may not work if the contents have a standard Bitrate / Frame rate above the compatible Frame / Sec xlisted in the table above.

Supports up to H.264, Level 4.1 -

H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported.

XVID, MPEG4 SP, ASP: -

Below 1280 x 720: 60 frame max -

Above 1280 x 720: 30 frame max -

H.263 is not supported. -

GMC 2 is not support. -

Only Samsung Techwin MJEPG is supported. -

Video Decoder Audio codec

Supports up to WMA 7, 8, 9, STD. -

WMA 9 PRO does not support 2 channel excess multi channel or lossless audio.

WMA sampling rate 22050 Hz mono is not supported. -

2-11

2. Product specications

2-6. Accessories

Product Description Code. No Remark

Remote Control AA59-00486A

Power Cord 3903-000601

Owner’s Instructions BN68-03375A

Warranty Card /

Safety Guide Manual

(Not available in all locations)

AA68-03242L

AA68-03533A

Samsung Electronics

Service center

3. Disassembly and Reassembly

This section of the service manual describes the disassembly and reassembly procedures for the LCD TV.

WARNING: This LCD TV contains electrostatically sensitive devices. Use caution when handling these components.

3-1. Disassembly and Reassembly

Cautions: 1. Disconnect the LCD TV from the power source before disassembly.

2. Follow these directions carefully; never use metal instruments to pry apart the cabinet.

Description Inch Picture Description Screws

Place monitor face down on cushioned 1. table.

Remove the screws from the stand. 2. 26": 3 EA 32": 4 EA

6002-001294

26"

32"

3-1

3-2

3. Disassembly and Reassembly

Description Inch Picture Description Screws

Remove stand.3.

26"

32"

Remove the screws of rear-cover. 4. 26": 7 EA 32": 8 EA

6002-001294

26"

32"

3-3

3. Disassembly and Reassembly

Description Inch Picture Description Screws

Lift up the rear-cover.5.

Remove the left and right speaker.6.

Remove the screws of main board. 7. 26", 32": 4 EA

Remove the screws of IP board. 26", 32": 5 EA

26"

32"

6001-002284

6003-001439

3-4

3. Disassembly and Reassembly

Description Inch Picture Description Screws

Remove the screws of stand link. 8. 26": 2 EA 32": 5 EA

Remove the screws of panel and front. 26" / 32": 2 EA.

screw is hidden under speaker



26"

32"

6001-002284

6003-001003



Lift up the stand link.9.

Lift up the panel.10.



Reassembly procedures are in the reverse order of disassembly procedures. ※

+ 47 hidden pages