SAMSUNG LN32D403E2D, UN32D4003, UN40D5003BF User Manual

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

Comuníquese con SAMSUNG WORLDWIDE

Si desea formular alguna pregunta o comentario en relación con los productos de Samsung, comuníquese con el centro de atención al cliente de SAMSUNG.

Country Customer Care Center

CANADA 1-800-SAMSUNG(726-7864) www.samsung.com

U.S.A 1-800-SAMSUNG(726-7864) www.samsung.com

Web Site Address

Samsung Electronics Canada Inc., Customer Service 55 Standish Court Mississauga, Ontario L5R 4B2 Canada

Samsung Electronique Canada Inc., Service à la Clientèle 55 Standish Court Mississauga, Ontario L5R 4B2 Canada

Samsung Electronics America, Inc. 85 Challenger Road Ridgefield Park, NJ 07660-2112

User Manual

BN68-03703B-02

imagine the possibilities

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/register

Model _____________ Serial No. _____________

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and speciﬁcations may be changed without notice.

Important Warranty Information Regarding Television Format Viewing

See the warranty card for more information on warranty terms.

✎

Wide screen format LCD/LED Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format fullmotion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to ﬁll the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark sidebars on nonexpanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week. Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven aging of LCD/LED Displays that leave subtle, but permanent burned-in ghost images in the LCD/LED picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On LCD/LED models that offer picture sizing features, use these controls to view different formats as a full screen picture. Be careful in the selection and duration of television formats used for viewing. Uneven LCD/LED aging as a result of format selection and use, as well as burned-in images, are not covered by your Samsung limited warranty.

• SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT

Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics (SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, for the warranty period originally speciﬁed, and to the Original Purchaser only.

The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement, the Original Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation to and from the Service Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in material or workmanship, and only those encountered in normal use of the product.

Excluded, but not limited to, are any originally speciﬁed provisions for, in-home or on-site services, minimum or maximum repair times, exchanges or replacements, accessories, options, upgrades, or consumables.

For the location of a SAMSUNG Authorized Service Center, please call toll-free:

– In the United States : 1-800-SAMSUNG (1-800-726-7864) – In Canada : 1-800-SAMSUNG

Still image warning

Avoid displaying still images (such as jpeg picture ﬁles) or still image elements (such as TV channel logos, panorama or 4:3 image format, stock or news bars at screen bottom etc.) on the screen. Constant displaying of still pictures can cause ghosting of LCD/LED screen, which will affect image quality. To reduce risk of this effect, please follow below recommendations:

• Avoid displaying the same TV channel for long periods.

• Always try to display any image on full screen, use TV set picture format menu for best possible match.

• Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout

process.

• Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.

Securing the Installation Space

Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation. Failing to do so may result in ﬁre or a problem with the product due to an increase in the internal temperature of the product.

When using a stand or wall-mount, use parts provided by Samsung Electronics only.

✎

If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.

The appearance may differ depending on the product.

✎

Be careful when you contact the TV because some parts can be somewhat hot.

✎

Installation with a stand. Installation with a wall-mount.

4inches

English

Contents

Getting Started

y List of Features ......................................................... 4

y Accessories .............................................................. 4

y Viewing the Control Panel ......................................... 5

y Viewing the Remote Control ......................................6

y Connecting to an Antenna ........................................7

y Plug & Play (Initial Setup) ........................................... 7

Connections

y Connecting to an AV Device ...................................... 8

y Changing the Input source ...................................... 10

Basic Features

y How to Navigate Menus .......................................... 11

y Channel Menu ........................................................ 11

Seeing Channels 11 Using Favorite Channels 12 Memorizing channels 12 Editing channels 12 Other Features 12

y Picture Menu ..........................................................14

Changing the Preset Picture Mode 14 Adjusting picture settings 14 Changing the Picture Options 14

y Sound Menu ........................................................... 16

Changing the Preset Sound Mode 16 Adjusting sound settings 16 Sound Settings 16

y Setup Menu ............................................................ 17

Setting the Time 17 Using the Sleep Timer 17 Setting the On/Off Timer 17 Locking Programs 18 Other Features 19

y Support Menu ......................................................... 20

Advanced Features

y Media Play .............................................................. 21

Connecting a USB Device 21

Other Information

y Installing the Wall Mount .........................................25

y Securing the TV to the Wall

(depending on the model) .......................................27

y Securing the TV to the Wall ..................................... 29

y Anti-Theft Kensington Lock ..................................... 29

y Troubleshooting ......................................................30

Storage and Maintenance 32

y Speciﬁcations ......................................................... 33

License 33

y Dimensions ............................................................. 34

y Index ...................................................................... 35

ENGLISH

Check the Symbol!

This function can be used by pressing the TOOLS button on the remote control.

✎

Note :

Important information

Step by step guide :

Informs you how to access

the menu.

English

Getting Started

List of Features

■ Excellent Digital Interface & Networking : With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed without a cable box / STB (Set-Top-Box) satellite receiver.

■ Media Play: Allows you to play music ﬁles, and pictures saved on a USB device. (P. 21)

■ Self Diagnosis: You can check picture and sound operation. (P. 20)

Accessories

✎

Please make sure the following items are included with your TV. If any items are missing, contact your dealer.

✎

The items' colors and shapes may vary depending on the models.

■ Remote Control (BN59-01006A) & Batteries (AAA x 2)

■ Warranty Card / Safety Guide / Quick Setup Guide

■ Owner’s Instructions

Holder wire stand

(UN40D5003BF Model only)

Assembling Holder-wire stand (UN40D5003BF Model only)

Input Cables (Sold Separately)

HDMI HDMI-DVI Component Composite (AV) Coaxial (RF)

■ Cleaning Cloth (BN63-01798B)

■ Power Cord

English

Viewing the Control Panel

✎

The product color and shape may vary depending on the model.

Speakers

01 Getting Started

Control Panel

P (Power) Remote control sensor Aim the remote control towards this spot on the TV.

SOURCEE

MENU Displays an on-screen menu of your TV’s features.

Power Indicator Blinks and turns off when the power is on and lights up in standby mode.

Standby mode

Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.

Press to turn the TV on and off.

Toggles between all the available input sources. In the on-screen menu, use this button as you would use the ENTERE button on the remote control.

Adjusts the volume. In the on-screen menu, use the y buttons as you would use the ◄ and ► buttons on the remote control.

Changes the channels. In the on-screen menu, use the z buttons as you would use the ▼ and ▲ buttons on the remote control.

English

Getting Started

Viewing the Remote Control

Turns the TV on and off.

Press to directly access to channels.

Press to select additional channels

(digital) being broadcast by the same

station. For example, to select channel

‘54-3’, press ‘54’, then press ‘-’ and ‘3’.

Adjusts the volume.

Displays the channel list on the screen. (P. 11)

View the Media Play. (P. 21)

Quickly select frequently used functions.

Select on-screen menu items and

change menu values.

Return to the previous menu.

Buttons used in the Channel List,

Media Play menu, etc.

MEDIA.P

A B C D

MTS

FAV.CH

P.SIZE CC

Display and select the available video sources. (P. 10)

Return to the previous channel.

Cut off the sound temporarily.

Change channels.

Displays the main on-screen menu.

Display favorite channel lists on the screen.

(p. 12) Press to display information on the TV

screen.

Exit the menu.

MTS: Press to choose stereo, mono or

Separate Audio Program (SAP broadcast). (P. 16)

P.SIZE: Choose the picture size. (P. 15) CC: Controls the caption decoder. (P. 19)

Installing batteries (Battery size: AAA)

English

✎

NOTE

Use the remote control within 23 feet from TV.

Bright light may affect the performance of the remote control.

Avoid use when nearby fluorescent lights or neon signs. The Color and shape may vary depending on the model.

Connecting to an Antenna

POWER

When the TV is initially powered on, basic settings proceed automatically.

✎

Connecting the power cord and antenna.

✎

The position of power input port may differ depending on the model.

TV Rear Panel

Cable

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in conﬁguring basic settings. Press the

POWERP button. Plug & Play is available only when the Input source is set to TV.

Selecting a language

Selecting Store Demo

or Home Use

Selecting an antenna

Selecting a channel The channel search will start automatically.

Setting the Clock

Mode

Viewing the HD

Connection Guide Enjoy your TV.

Press the ▲ or ▼ button, then press the ENTERE button. Select the desired OSD (On Screen Display) language.

Press the ◄ or ► button, then press the ENTERE button.

y Select the Home Use mode. Store Demo Mode is for retail

environments.

y To return the unit’s settings from Store Demo to Home Use

(standard): Press the volume button on the TV. When you see the volume in the OSD, press and hold MENU for 5 sec.

Press the ▲ or ▼ button, then press the ENTER

✎

In Cable mode, you can select the correct signal source among STD, HRC, and IRC by pressing the ▲, ▼, ◄ or ► button, then press the ENTERE button.

For more information, refer to Channel → Auto Program. (P. 12)

✎

Press the ENTERE button at any time to interrupt the memorization process.

Set the Clock Mode automatically or manually.

✎

If you select the Auto, set the daylight saving time. Select the time zone where you live.

The connection method for the best HD screen quality is displayed.

Press the ENTER

button.

VHF/UHF Antenna

button. Select Air, Cable or Auto.

01 Getting Started

If You Want to Reset This Feature...

MENUm → Setup → Plug & Play → ENTER

Setup

Plug & Play

Language : English Time

Game Mode : Off

V-Chip Caption Melody : Medium

English

R PB Y

R-AUDIO-L

R PB Y

R-AUDIO-L

R PB Y

W W

BGRRWY

ConnectionsConnections

Connecting to an AV Device

Using an HDMI cable or HDMI to DVI Cable: HD connection (up to 1080p)

We recommend using the HDMI connection for the best quality HD picture. Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver

BD/DVD player/

HD cable/sat box

TV Rear

✎

HDMI IN 1(DVI), 2

When using an HDMI/DVI cable connection, you must use the HDMI/DVI IN jack for video. A DVD, Blu-ray

player, HD cable box, HD STB satellite receiver, cable box, or STB satellite receiver may require a DVI-HDMI (DVI to HDMI) cable or DVI-HDMI (DVI to HDMI) adapter.

The picture may not display normally (if at all) or the audio may not work if an external device that uses an older

version of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer of the external device about the HDMI version and, if out of date, request an upgrade.

Be sure to purchase a certiﬁ ed HDMI cable. Otherwise, the picture may not display or a connection error may

occur. If an HDMI to DVI cable is connected to the HDMI IN 1(DVI) port, the audio does not work.

Using a Component Cable: (up to 1080p), Using an Audio/Video Cable: (480i only)

Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR

TV Rear

HDMI OUT

DVI OUT

VIDEO OUT

English

W Y

AUDIO OUT

VCR

AUDIO OUT

BGR

COMPONENT OUT

Blu-ray player

✎

When connecting to AV IN, the color of the AV IN [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow).

✎

For better picture quality, the Component connection is recommended over the A/V connection.

Yellow Red White Red Blue Green

Display Modes (HDMI/DVI Input)

19", 26", 32" : Optimal resolution is 1360x768@60Hz.

Mode Resolution

IBM

MAC

VESA DMT

640 x 350 31.469 70.086 25.175 + / 720 x 400 31.469 70.087 28.322 - / + 640 x 480 35.000 66.667 30.240 - / 832 x 624 49.726 74.551 57.284 - / -

640 x 480

800 x 600

1024 x 768

1360 x 768 47.712 60.015 85.500 + / +

Horizontal Frequency (KHz) Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H / V)

31.469 59.940 25.175 - / -

37.861 72.809 31.500 - / -

37.500 75.000 31.500 - / -

37.879 60.317 40.000 + / +

48.077 72.188 50.000 + / +

46.875 75.000 49.500 + / +

48.363 60.004 65.000 - / -

56.476 70.069 75.000 - / -

60.023 75.029 78.750 + / +

Display Modes (HDMI/DVI Input)

22", 40" : Optimal resolution is 1920 x 1080@60Hz.

Mode Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H / V)

IBM

MAC

VESA DMT

VESA DMT / DTV CEA 1920 x 1080p 67.500 60.000 148.500 +/+

640 x 350 31.469 70.086 25.175 +/720 x 400 31.469 70.087 28.322 -/+ 640 x 480 35.000 66.667 30.240 -/832 x 624 49.726 74.551 57.284 -/-

1152 x 870 68.681 75.062 100.000 -/-

640 x 480 31.469 59.940 25.175 -/640 x 480 37.861 72.809 31.500 -/640 x 480 37.500 75.000 31.500 -/800 x 600 37.879 60.317 40.000 +/+ 800 x 600 48.077 72.188 50.000 +/+

800 x 600 46.875 75.000 49.500 +/+ 1024 x 768 48.363 60.004 65.000 -/1024 x 768 56.476 70.069 75.000 -/1024 x 768 60.023 75.029 78.750 +/+ 1152 x 864 67.500 75.000 108.000 +/+

1280 x 1024 63.981 60.020 108.000 +/+ 1280 x 1024 79.976 75.025 135.000 +/+

1280 x 800 49.702 59.810 83.500 -/+ 1280 x 800 62.795 74.934 106.500 -/+ 1280 x 960 60.000 60.000 108.000 +/+ 1360 x 768 47.712 60.015 85.500 +/+ 1440 x 900 55.935 59.887 106.500 -/+ 1440 x 900 70.635 74.984 136.750 -/+

1680 x 1050 65.290 59.954 146.250 -/+

02 Connections

English

Connections

P.SIZE

✎

NOTE

For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.

The interlace mode is not supported.

The set might operate abnormally if a non-standard video format is selected.

PC(D-Sub) input is not supported.

If an HDMI to DVI cable is connected to the HDMI IN 1(DVI) port, the audio does not work.

SERVICE

Connector for service only.

Changing the Input source

Source List

MENUm → Input → Source List → ENTER

Use to select TV or an external input sources such as a DVD / Blu-ray player / cable box / STB satellite receiver.

■ TV / AV / Component / HDMI1/DVI / HDMI2

✎

You can only choose external devices that are connected to the TV. In the Source List, connected inputs will be highlighted.

✎

PC(D-Sub) input is not supported. If you want to connect PC to the TV, use HDMI1/DVI input.

✎

You can use the Edit Name and Information when you press the TOOLS button in the Source List.

Information

You can see detailed information about the selected external device.

Edit Name

MENUm → Input → Edit Name → ENTER

■ VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI / TV / IPTV / Blu-ray / HD DVD / DMA: Name the device connected to the input jacks to make your input source selection

easier.

✎

When connecting a PC to the HDMI IN 1(DVI) port with HDMI cable, you should set the TV to PC mode under Edit Name.

✎

When connecting a PC to the HDMI IN 1(DVI) port with HDMI to DVI cable, you should set the TV to DVI PC mode under Edit Name.

✎

When connecting an AV devices to the HDMI IN 1(DVI) port with HDMI to DVI cable, you should set the TV to DVI mode under Edit Name.

English

MEDIA.P

Basic Features

How to Navigate Menus

Before using the TV, follow the steps below to learn how to navigate the menu and select and adjust different functions.

Channel Menu

¦ Seeing Channels

03 Basic Features

1 MENU button: Displays the main on-screen menu. 2 ENTER

3 RETURN button: Returns to the previous menu. 4 EXIT button: Exits the on-screen menu.

How to Operate the OSD (On Screen Display)

The access step may differ depending on the selected menu.

2 3 4 5

select an item. Conﬁ rm the setting.

/ Direction button: Move the cursor and

▲ / ▼ Select an icon with the ▲ or ▼

ENTER

▲ / ▼

◄ / ►

ENTER

EXIT

The main menu options appear on the screen:

Picture, Sound, Channel, Setup, Input, Application, Support.

button.

Press ENTERE to access the sub-menu.

Select the desired submenu with the ▲ or ▼ button.

Adjust the value of an item with the ◄ or ► button. The adjustment in the OSD may differ depending on the selected menu.

Press ENTERE to conﬁ rm the selection.

Press EXIT.

AV.

Channel List

MENUm → Channel → Channel List → ENTER

Add, delete or set Favorite channels and use the program guide for digital broadcasts.

Select a channel in the All Channels, Added Channels, Favorite or Programmed screen by pressing the ▲ / ▼ buttons, and pressing the ENTER can watch the selected channel.

Added Channels

Air B Zoom C Select T Tools

■ All Channels: Shows all currently available

■

Added Channels: Shows all added channels.

■

Favorite: Shows all favorite channels.

■

Programmed: Shows all currently reserved

✎

Using the color buttons with the Channel List

Green (Zoom): Enlarges or shrinks a channel

number.

Yellow (Select): Selects multiple channel lists.

Select desired channels and press the Yellow button to set all the selected channels at the same time. The

mark appears to the left of the selected channels.

(Tools): Displays the Channel List option menu.

(The Options menus may differ depending on the situation.)

Channel Status Display Icons

button. Then you

6 Air

6-1 ♥ TV #6

7-1 ♥ TV #7

8 Air 9 Air

9-1 ♥ TV #9

10 Air

10-1 ♥ TV #10 11-1 ♥ TV #11

channels.

programs.

Icons Operations

A channel selected.

A channel set as a Favorite.

A reserved program.

)

A program currently being broadcast.

(

English

Basic Features

MEDIA.P

POWER

P.SIZE

¦ Using Favorite Channels

MENUm → Channel → Channel List → ENTER

Add to Favorite / Delete from Favorite

Set channels you watch frequently as Favorites.

1. Select a channel and press the TOOLS

button.

2. Add or delete a channel using the Add to Favorite or Delete from Favorite

menu respectively.

Added Channels

Air B Zoom C Select T Tools

6 Air

6-1 ♥ TV #6

7-1 ♥ TV #7

8 Air 9 Air

9-1 ♥ TV #9

10 Air

10-1 ♥ TV #10 11-1 ♥ TV #11

Delete Add to Favorite Timer Viewing Select All Auto Program

¦ Memorizing channels

MENUm → Channel → ENTER

Antenna (Air / Cable)

Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system).

Auto Program

■ Air: Air antenna signal.

■ Cable: Cable antenna signal.

■ Auto: Air and Cable antenna.

✎

NOTE

When selecting the Cable TV system: Selects the

cable system. STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point, the signal source has been selected.

After all the available channels are stored, it starts

to remove scrambled channels. The Auto Program menu then reappears.

How to Stop Auto Programming

button.

1. Press the ENTER

2. A message will ask Stop Auto Program? Select Yes by

pressing the ◄ or ► button.

3. Press the ENTER

¦ Editing channels

MENUm → Channel → Channel List → ENTER

Channel Name Edit

1. Select a channel and press the TOOLS button.

2. Edit the channel name using the Channel Name Edit

menu.

■ Channel Name Edit (analog channels only): Assign your

own channel name.

¦ Other Features

MENUm → Channel → ENTER

Clear Scrambled Channel

This function is used to ﬁlter out scrambled channels after Auto Program is completed. This process may take up to 20~30 minutes.

How to Stop Searching Scrambled Channels

1. Press the ENTER

2. Press the ◄ button to select Yes.

3. Press the ENTER

✎

This function is only available in Cable mode.

button to select Stop.

button.

English

Channel List

MENUm → Channel → Channel List → ENTER

Channel List Option Menu

Set each channel using the Channel List menu options (Add/ Delete, Timer Viewing, Select All/ Deselect All, Auto Program). Option menu items may differ depending on the

channel status.

1. Select a channel and press the TOOLS button.

2. Select a function and change its settings.

■ Add / Delete: Delete or add a channel to display the

channels you want.

✎

NOTE

All deleted channels will be shown on the All

Channels menu. A gray-colored channel indicates the channel

has been deleted. The Add menu only appears for deleted channels.

Delete a channel from the Added Channels or

Favorite menu in the same manner.

■ Timer Viewing: You can set a desired channel to be

displayed automatically at the set time; even when you are watching another channel. Set the current time ﬁrst to use this function. (P. 17)

1. Press the ◄ / ► /▲ / ▼ buttons to select the

desired channel in Channel List.

2. Press the TOOLS button, then select Timer Viewing.

3. Scroll up or down to adjust the settings in the box,

or use the numeric buttons on your remote for entering the date and time.

✎

If you selected Once, Everyday, Every Week,

Mon~Fri, Mon~Tue, Wed~Thu, or Sat~Sun in Repeat, you can enter the date you want.

Press the ENTERE button when done.

✎

NOTE

Only memorized channels can be reserved.

Reserved programs will be displayed in the

Programmed menu. When a digital channel is selected, press the ►

button to view the digital program.

■ Select All: Select all the channels in the channel list.

■ Deselect All: Deselect all the selected channels.

✎

You can only select Deselect All when one or more channels are selected.

■ Auto Program: Scans for a channel automatically and

stores in the TV. (P.12)

Programmed

(in Channel List) You can view, modify or delete a show you have reserved to watch.

1. Press the

2. Press the ◄ and ▼ button to move the Programmed

menu and press the TOOLS button.

■ Change Info: Change a show you have reserved to

watch.

■ Cancel Schedules: Cancel a show you have reserved

to watch.

■ Information: Display a show you have reserved

to watch. (You can also change the reservation Information.)

■ Select All / Deselect All: You can select or deselect all

channels in the channel list.

ENTERE

button to select Channel List.

Fine Tune

(analog channels only) If the reception is clear, you do not have to ﬁne tune the

channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, ﬁne tune the channel manually.

y Select Fine Tune in the Channel menu.

✎

Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of the channel number in the channel banner.

✎

To reset the fine-tuning, select Reset.

03 Basic Features

English

Basic Features

Picture Menu

¦ Changing the Preset Picture Mode

MENUm → Picture → Mode → ENTER

Mode

Select your preferred picture type.

■ Dynamic: Suitable for a bright room.

■ Standard: Suitable for a normal environment.

■ Movie: Suitable for watching movies in a dark room.

¦ Adjusting picture settings

MENUm → Picture → ENTER

Backlight / Contrast / Brightness / Sharpness / Color / Tint (G/R)

Your television has several setting options for picture quality control.

✎

NOTE

When you make changes to Backlight, Contrast,

Brightness, Sharpness, Color or Tint (G/R), the OSD will be adjusted accordingly.

Settings can be adjusted and stored for each

external device connected to the TV. Lowering picture brightness reduces power

consumption.

¦ Changing the Picture Options

Advanced Settings

MENUm → Picture → Advanced Settings → ENTER

(available in Standard / Movie mode) Compared to previous models, new Samsung TVs have a

more precise picture.

Advanced Settings

Black Tone : Off ►

Dynamic Contrast : Medium Gamma : 0 Color Space : Native White Balance Flesh Tone : 0 Edge Enhancement : On

U Move E Enter R Return

■ Black Tone (Off / Dark / Darker / Darkest): Select the

black level to adjust the screen depth.

■ Dynamic Contrast (Off / Low / Medium / High):

Adjust the screen contrast.

■ Gamma: Adjust the primary color intensity.

■ Color Space (Auto / Native): Adjust the range of colors

available to create the image.

■ White Balance: Adjust the color temperature for a more

natural picture. R-Offset / G-Offset / B-Offset: Adjust each color's

(red, green, blue) darkness. R-Gain / G-Gain / B-Gain: Adjust each color's (red,

green, blue) brightness. Reset: Resets the White Balance to it's default settings.

■ Flesh Tone: Emphasize pink "flesh tone".

■ Edge Enhancement (Off / On): Emphasize object

boundaries.

English

Picture Options

MENUm → Picture → Picture Options → ENTER

Picture Options

Color Tone : Normal ►

Size : 16:9 Digital Noise Filter : Auto

HDMI Black Level : Normal

Film Mode : Off

U Move E Enter R Return

■ Color Tone (Cool / Normal / Warm1 / Warm2)

✎

Warm1 or Warm2 will be activated when the picture mode is Movie.

✎

Settings can be adjusted and stored for each external device connected to an input on the TV.

■ Size: Your cable box/satellite receiver

may have its own set of screen sizes as well. However, we highly recommend you use 16:9 mode most of the time.

16:9: Sets the picture to 16:9 wide mode.

Zoom1: Use for moderate magniﬁcation. Zoom2: Use for a stronger magniﬁcation. Wide Fit: Enlarges the aspect ratio of the picture to ﬁt

the entire screen. 4:3: Sets the picture to basic (4:3) mode.

✎

Do not watch in 4:3 format for a long time. Traces of borders displayed on the left, right and center of the screen may cause image retention (screen burn) which are not covered by the warranty.

Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are input.

✎

NOTE

After selecting Zoom1, Zoom2 or Wide Fit:

1. Press the ► button to select Position.

2. Press the ENTER

3. Press the ▲ or ▼ button to move the picture up

or down.

4. Press the ENTER

5. Press the ► button to select Reset.

6. Press the ENTER

to its default position.

button.

button to reset the picture

P.SIZE

HD (High Definition): 16:9 - 1080i/1080p (1920x1080),

720p (1280x720) Settings can be adjusted and stored for each

external device you have connected to an input on the TV.

Input Source Picture Size

ATV, AV, Component (480i, 480p) DTV(1080i), Component (1080i, 1080p), HDMI (720p, 1080i, 1080p)

■ Digital Noise Filter (Off / Low / Medium / High / Auto): If the broadcast signal received by your TV is weak, you can activate the Digital Noise Filter feature to reduce any static and ghosting that may appear on the screen.

✎

When the signal is weak, try other options until the best picture is displayed.

■ HDMI Black Level (Low / Normal): Selects the black level on the screen to adjust the screen depth.

✎

Available only in HDMI mode (RGB signals).

■ Film Mode (Off / Auto): Sets the TV to automatically sense and process ﬁlm signals from all sources and adjusts the picture for optimum quality.

✎

Available in ATV, DTV(interlace), AV, COMPONENT (480i / 1080i) and HDMI (1080i).

16:9, Zoom1, Zoom2, 4:3

16:9, 4:3, Wide Fit, Screen Fit

Picture Reset (Reset Picture Mode / Cancel)

Resets your current picture mode to it's default settings.

■ Reset Picture Mode: Returns all picture values in the currently selected mode to the default settings.

03 Basic Features

English

Basic Features

P.SIZE

Sound Menu

¦ Changing the Preset Sound Mode

MENUm → Sound → Mode → ENTER

Mode

■ Standard: Selects the normal sound mode.

■ Music: Emphasizes music over voices.

■ Movie: Provides the best sound for movies.

■ Clear Voice: Emphasizes voices over other sounds.

■ Custom: Recalls your customized sound settings.

¦ Adjusting sound settings

MENUm → Sound → Equalizer → ENTER

Equalizer

Adjusts the sound mode.

■ Mode: Selects the sound mode among the predeﬁned

settings.

■ Balance: Adjusts the balance between the right and left

speaker.

■ 100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth

Adjustment): Adjusts the level of speciﬁc bandwidth frequencies.

■ Reset: Resets the equalizer to its default settings.

Preferred Language

(digital channels only) Digital-TV broadcasts are capable of

simultaneous transmission of many audio tracks (for example, simultaneous translations of the program into foreign languages).

✎

You can only select a language among the ones being broadcasted.

Multi-Track Sound (MTS)

(analog channels only)

■ Mono: Choose for channels that are broadcasting in mono or if you are having difﬁculty receiving a stereo signal.

■ Stereo: Choose for channels that are broadcasting in stereo.

■ SAP: Choose to listen to the Separate Audio Program, which is usually a foreign-language translation.

✎

Depending on the particular program being broadcast, you can listen to Mono, Stereo or SAP.

Auto Volume (Off / On)

Because each broadcasting station has its own signal conditions, the volume may ﬂuctuate each time channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.

¦ Sound Settings

MENUm → Sound → ENTER

SRS TruSurround HD (Off / On)

SRS TruSurround HD is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats.

English

Sound Reset (Reset All / Reset Sound Mode / Cancel)

■ Reset All: Resets all sound settings to the factory defaults.

■ Reset Sound Mode: Returns all sound values in the currently selected mode to the default settings

Setup Menu

¦ Setting the Time

MENUm → Setup → Time → ENTER

¦ Setting the On/Off Timer

MENUm → Setup → Time → Timer 1 →

ENTER

■ Timer 1 / Timer 2 / Timer 3: Three different on / off timer settings can be made. You must set the clock ﬁrst.

03 Basic Features

Time

✎

The current time will appear every time you press the

INFO button.

■ Clock: Setting the clock is for using various timer

features of the TV.

✎

If you disconnect the power cord, you have to set the clock again.

Clock Mode: Set up the current time manually or automatically.

– Auto: Set the current time automatically using the

time from the digital channel.

✎

The antenna must be connected in order to set the time automatically.

– Manual: Set the current time manually.

✎

Depending on the broadcast station and signal, the auto time set up may not be correct. In this case, set the time manually.

Clock Set: Set the Month, Day, Year, Hour, Minute and am/pm.

✎

Available only when Clock Mode is set to Manual.

✎

You can set the Month, Day, Year, Hour and Minute directly by pressing the number buttons on the remote control.

Time Zone: Select your time zone.

✎

This function is only available when the Clock

Mode is set to Auto.

DST (Daylight Saving Time) (Off / On / Auto):

Switches the Daylight Saving Time function on or off.

✎

This function is only available when the Clock

Mode is set to Auto.

¦ Using the Sleep Timer

MENUm → Setup → Time → Sleep Timer → ENTER

■ Sleep Timer

after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes).

✎

To cancel the Sleep Timer, select Off.

: Automatically shuts off the TV

On Time

Timer 1

▲

12 00 am Inactivate

▼

Off Time

12 00 am Inactivate

Volume Contents

10 TV Air 3

Repeat

Once

On Time / Off Time: Set the hour, minute, am/pm and activate / inactivate. (To activate the timer with the setting you have chosen, set to Activate.)

Volume: Set the desired volume level. Contents: When the On Time is activated, you can turn

on a speciﬁc channel or play back contents such as photo or audio ﬁles.

– TV/USB: Select TV or USB. (Make sure that an USB

device is connected to your TV.)

– Antenna: Show selected antenna. – Channel: Select the desired channel. – Music: Select the folder containing MP3 ﬁles on the

USB device.

– Photo: Select the folder containing JPEG ﬁles on the

USB device.

Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at you convenience. If you

select Manual, you can set up the day you want to activate the timer.

✎

The c mark indicates the day is selected.

✎

Auto Power Off (available only when the TV is turned on by the Timer): The TV will be automatically turned off after 3 hours of being left idle to prevent overheating.

Sun Mon Tue Wed Thu Fri Sat

L Move U Adjust E Enter R Return

English

Basic Features

¦ Locking Programs

MENUm → Setup → V-Chip → ENTER

V-Chip

The V-Chip feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN (personal identiﬁcation number) before any of the V-Chip restrictions are set up or changed.

✎

NOTE

V-Chip is not available in HDMI or Component

mode. The default PIN number of a new TV set is “0-0-0-0”.

Allow all: Press to unlock all TV ratings.

Block all: Press to lock all TV ratings.

■ V-Chip Lock (Off / On): You can block rated TV

Programs.

■ TV Parental Guidelines: You can block TV programs

depending on their rating. This function allows you to control what your children are watching.

TV-Y: Young children / TV-Y7: Children 7 and over / TV-G: General audience / TV-PG: Parental guidance / TV-14: Viewers 14 and over / TV-MA: Mature audience

ALL: Lock all TV ratings. / FV: Fantasy violence / V: Violence / S: Sexual situation / L: Adult Language / D: Sexually Suggestive Dialog

✎

The V-Chip will automatically block certain categories dealing with more sensitive material. For example, if you block the TV-Y category, then TV-Y7 will automatically be blocked. Similarly, if you block the TV-G category, then all the categories in the young adult group will be blocked (TV-G, TV-PG, TV-14 and TV-MA). The sub-ratings (D, L, S, V) work similarly. So, if you block the L sub-rating in TV-PG, then the L sub-ratings in TV-14 and TV-MA will automatically be blocked.

■ MPAA Rating: You can block movies depending on

their MPAA rating. The Motion Picture Association of America(MPAA) has implemented a rating system that provides parents or guardians with advanced information on which ﬁlms are appropriate for children.

G: General audience (no restrictions). / PG: Parental guidance suggested. / PG-13: Parents strongly cautioned. / R: Restricted. Children under 17 should be accompanied by an adult. / NC-17: No children under age 17. / X: Adults only. / NR: Not rated.

✎

The V-Chip will automatically block any category that deals with more sensitive material. For example, if you block the PG-13 category, then R, NC-17 and X will automatically be blocked.

■ Canadian English: You can block TV programs depending on their Anglophone Canadian.

C: Programming intended for children under age 8. / C8+: Programming generally considered acceptable for

children 8 years and over to watch on their own. /

G: General programming, suitable for all audiences. / PG: Parental Guidance. / 14+: Programming contains

themes or content which may not be suitable for viewers under the age of 14. / 18+: Adult programming.

✎

The V-Chip will automatically block any category that deals with more sensitive material. For example, if you block the G category, then PG, 14+ and 18+ will automatically be blocked.

■ Canadian French: You can block TV programs depending on their French Canadian rating.

G: General / 8 ans+: Programming generally considered acceptable for children 8 years and over to watch on their own. / 13 ans+: Programming may not be suitable for children under the age of 13. / 16 ans+: Programming is not suitable for children under the age of 16. / 18 ans+: Programming restricted to adults.

✎

The V-Chip will automatically block any category that deals with more sensitive material. For example, if you block the 8 ans+ category, then 13 ans+, 16 ans+ and 18 ans+ will automatically be blocked also.

■ Downloadable U.S. Rating: Parental restriction information can be used while watching DTV channels.

✎

NOTE

If information is not downloaded from the

broadcasting station, the Downloadable U.S. Rating menu is deactivated.

Parental restriction information is automatically

downloaded while watching DTV channels. It may take several seconds.

The Downloadable U.S. Rating menu

is available for use after information is downloaded from the broadcasting station. However, depending on the information from the broadcasting station, it may not be available for use.

Parental restriction levels differ depending on

the broadcasting station. The default menu name and Downloadable U.S. Rating change depending on the downloaded information.

Even if you set the on-screen display to another

language, the Downloadable U.S. Rating menu will appear in English only.

The rating will automatically block certain

categories that deal with more sensitive material.

The rating titles (For example: Humor Level..etc)

and TV ratings (For example: DH, MH, H..etc) may differ depending on the broadcasting station.

English

■ Change PIN: The Change PIN screen will appear.

P.SIZE

Choose any 4 digits for your PIN and enter it in the Enter New PIN. Re-enter the same 4 digits in the Conﬁrm New PIN. When the Conﬁrm screen appears, press the OK button. Your PIN has been memorized.

How to watch a restricted channel

If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and the following message will appear: This channel is blocked by

V-Chip. Please enter the PIN to unblock.

✎

If you forget the PIN, press the remote-control buttons in the following sequence, which resets the pin to “0-0-0-0” : POWER (off) → MUTE → 8 → 2 → 4 → POWER (on)

¦ Other Features

MENUm → Setup → ENTER

Language

Set the menu language.

1. Select Language and press the ENTER

2. Choose desired language and press the ENTER

button.

✎

Choose between English, Español and Français.

button.

Game Mode (Off / On)

When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by selecting the game menu.

✎

NOTE

Precautions and limitations for game mode

– To disconnect the game console and connect

another external device, set Game Mode to Off in the setup menu.

– If you display the TV menu in Game Mode, the

screen shakes slightly.

Game Mode is not available when the input source

is set to TV. After connecting the game console, set Game Mode

to On. Unfortunately, you may notice reduced picture quality.

If Game Mode is On:

– Picture mode is set to Standard and Sound mode

is set to Custom.

– Equalizer is not available.

Caption

(On-Screen Text Messages)

■ Caption (Off / On): You can switch the caption function on or off. If captions are not available, they will not be displayed on the screen.

✎

The Caption feature does not work in Component or HDMI modes.

■ Caption Mode: You can select the desired caption mode.

✎

The availability of captions depends on the program being broadcasted.

Default / CC1~CC4 / Text1~Text4: (analog channels only) The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device to the TV. (Depending on the broadcasting signal, the Analog Caption function may or may not work with digital channels.)

Default / Service1~Service6 / CC1~CC4 / Text1~Text4: (digital channels only) The Digital Captions

function works with digital channels.

✎

Service1~6 may not be available in digital caption mode depending on the broadcast.

■ Digital Caption Options: (digital channels only) Size: Options include Default, Small, Standard and

Large. The default is Standard. Font Style: Options include Default and Styles 0 to 7.

The default is Style 0. Foreground Color: Options include Default, White,

Black, Red, Green, Blue, Yellow, Magenta and Cyan. You can change the color of the letter. The default is White.

Background Color: Options include Default, White, Black, Red, Green, Blue, Yellow, Magenta and Cyan. You can change the background color of the caption. The default is Black.

Foreground Opacity: This adjusts the opacity of text. Options include Default, Transparent, Translucent, Solid and Flashing.

Background Opacity: This adjusts the opacity of the caption background. Options include Default, Transparent, Translucent, Solid and Flashing.

Return to Default: This option sets each Size, Font Style, Foreground Color, Background Color, Foreground Opacity and Background Opacity to its default.

03 Basic Features

English

Basic Features

✎

NOTE

Digital Caption Options are available only

when Default and Service1 ~ Service6 can be selected in Caption Mode.

The availability of captions depends on the

program being broadcasted. The Default setting follow the standards set by

the broadcaster. The Foreground and Background cannot be set

to have the same color. You cannot set both the Foreground Opacity

and the Background Opacity to Transparent.

Melody (Off / Low / Medium / High)

Set so that a melody plays when the TV is turned on or off.

✎

NOTE

Only available when the Input source is set to TV.

To turn the melody off, set Melody to Off. The Melody does not play.

– When no sound is output from the TV because the

MUTE button has been pressed.

– When no sound is output from the TV because the

volume has been reduced to minimum with the

VOL – button.

– When the TV is turned off by Sleep Timer function.

Energy Saving (Off / Low / Medium / High / Auto)

Adjust the brightness of the TV in order to reduce power consumption. When watching TV at night, set the Energy Saving to High to reduce eye fatigue as well as power consumption.

Support Menu

■ Sound Test: Use the built-in melody sound to check for sound problems.

Yes: If you can hear sound only from one speaker or not at all during the sound test, select Yes. There may be a problem with the TV. Contact Samsung’s Call Center for assistance (1-800-SAMSUNG).

No: If you can hear sound from the speakers, select No. There may be a problem with your external equipment. Please check your connections. If the problem persists, refer to the external device’s user manual.

■ Signal Strength: (digital channels only) An HD channel’s reception quality is either perfect or the channels are unavailable. Adjust your antenna to increase signal strength.

Software Upgrade

Software Upgrade can be

performed by downloading the latest ﬁrmware from samsung.com to a USB memory device.

TV Rear Panel

USB Drive

HD Connection Guide

Refer to this information when connecting external devices to the TV.

Contact Samsung

View this information when your TV does not work properly or when you want to upgrade the software. You can ﬁnd information regarding our call centers and how to download products and software.

MENUm → Support → ENTER

Self Diagnosis

■ Picture Test: Use to check for picture problems. If the

problem continues to occur, check the Color pattern. Yes: If the test pattern does not appear or there is

noise in the test pattern, select Yes. There may be a problem with the TV. Contact Samsung’s Call Center for assistance (1-800-SAMSUNG).

No: If the test pattern is properly displayed, select No. There may be a problem with your external equipment. Please check your connections. If the problem persists, refer to the external device’s user manual.

English

Music

Photo Music Setup

SUM

307.2MB/973.7MB

USB

POWER

Advanced Features

Media Play

Enjoy photos and/or music ﬁ les saved on a USB

MEDIA.P

¦ Connecting a USB Device

1. Turn on your TV.

2. Connect a USB device containing photo and/or music ﬁ les to the USB jack on the

rear of the TV.

3. When the Application selection screen is displayed, press the ► button to select Media Play (USB), then press the ENTER

Using the Media Play Menu

Viewing a Photo (or Slide Show)

1. Press the MENU button. Press the ▲ or ▼ button to select

Application, then press the ENTER

2. Press the ▲or ▼button to select Media Play (USB), then press the

ENTER

3. Press the ▲or ▼ button to select the corresponding USB Memory

Device, then press the ENTER

✎ ✎

4. Press the ◄ or ► button to select an icon (Photo, Music, Setup), then press the ENTER

Mass Storage Class (MSC) device.

MENUm → Application → Media Play

(USB) → ENTER

button.

The Media Play menu differs depending on the USB Memory Device connected to TV.

Some devices may not be supported due to compatibility problems.

button.

Device Name

Photo

SUM

307.2MB/973.7MB

Photo Music Setup

USB

SUM

315.0MB/495.0MB Free

Enter e Exit

TV Rear Panel

USB Drive

Move E Enter R Return

03 Basic Features

04 Advanced Features

✎

It might not work properly with unlicensed multimedia files.

✎

Need-to-Know List before using Media Play (USB)

Only alphanumeric characters must be used as a folder name or file name (photo, music).

The file system only supports FAT16/32 (The NTFS file system is not supported) Certain types of USB Digital camera

and audio devices may not be compatible with this TV. Media Play only supports USB Mass Storage Class (MSC) devices. MSC is a Mass Storage Class Bulk-Only

Transport device. Examples of MSC are Thumb drives and Flash Card Readers. Devices should be connected directly to the TV’s USB port. USB (HDD) is not supported.

Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data.

SAMSUNG is not responsible for any data file damage or data loss. Please connect directly to the USB port of your TV. If you are using a separate cable connection, there may be a USB

Compatibility problem. Only MP3 and JPEG file formats are supported.

The Media Play (USB) mp3 format only supports music files with a high sampling frequency (32 kHz, 44.1 kHz, or 48

kHz). We recommend the sequential jpeg format.

Do not disconnect the USB device while it is loading.

English

2121

Advanced Features

Photo

Photo Music Setup

SUM

307.2MB/973.7MB

Music

Photo Music Setup

SUM

307.2MB/973.7MB

USB

MSC supports MP3 and JPEG files, and the PTP device supports JPEG files only.

MTP (Media Transfer Protocol) is not supported.

The playing duration of an mp3 file may be displayed as “00:00:00” if its playing time information is not found at the

start of the file. The higher the resolution of the image, the longer it takes to display on the screen.

The Photo or Music List displays up to 300 folders or files.

Loading may take some time depending on the size of the file.

MP3 files with DRM that have been downloaded from a non-free site cannot be played.

Digital Rights Management (DRM) is a technology that supports the creation, distribution and management of of the

content in an integrated and comprehensive way, including the protection of the rights and interests of the content providers, the prevention of the illegal copying of contents, as well as managing billings and settlements.

If a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read.

If a USB device connected to the TV is not recognized, the list of files on the device is corrupted or a file in the list is

not played, connect the USB device to the PC, format the device and check the connection. If a file deleted from the PC is still found when Media Play is run, use the “Empty the Recycle Bin” function on the PC

to permanently delete the file.

Photo

Viewing a Photo (or Slide Show)

1. Press the INFO button to display the option View, Start Slide Show, Delete, Delete All, Deselect All.

2. Press the ▲or ▼button to select Start Slide Show then press the

ENTER

button.

✎

During the slide show, files are displayed in order from the currently shown file.

✎

MP3 files can be automatically played during the Slide Show if the Default Background Music is set to On. To enable this function, MP3 files and other photo files must be located in the

Photo

440

580

78.0KB

Jan 7, 2010

03 / 14

SUM

307.2MB/973.7MB

DSC_0558.JPG

Upper Fold... Folder

File.....jpg File.....jpg

Free

File.....jpg File.....jpg File.....jpg

Select

File.....jpg

File.....jpg File.....jpg File.....jpg

File.....jpg File.....jpg

Move j Option EPlay R Return

same folder on the USB Memory Device.

✎

Press the INFO button during the slide show to set the following options Slide Show Speed, Background Music, Background Music Setting, List. Press the ▲or ▼button to select the option, then press the ENTERE button.

– After setting the option press the ENTER

✎

Press the INFO button during the photo view to set the following options Start Slide Show, Zoom, Rotate, List. Press the ▲or ▼button to select the option, then press the ENTER

– After setting the option press the ENTER

button to make a change.

button.

button to make a change.

1/1 Page

File.....jpg File.....jpg

2222

EnglishEnglish

+ 49 hidden pages