Samsung LN32C480H1 User Manual

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

Contacte con SAMSUNG WORLD WIDE

Si tiene alguna pregunta o comentario referente a nuestros productos, por favor contacte con nuestro Servicio de Atención
al Cliente.

Country

ARGENTINE 0800-333-3733 www.samsung.com

BRAZIL

CHILE 800-SAMSUNG(726-7864) www.samsung.com

COLOMBIA 01-8000112112 www.samsung.com

COSTA RICA 0-800-507-7267 www.samsung.com

ECUADOR 1-800-10-7267 www.samsung.com

EL SALVADOR 800-6225 www.samsung.com

GUATEMALA 1-800-299-0013 www.samsung.com

HONDURAS 800-7919267 www.samsung.com

JAMAICA 1-800-234-7267 www.samsung.com

MEXICO 01-800-SAMSUNG(726-7864) www.samsung.com

NICARAGUA 00-1800-5077267 www.samsung.com

PANAMA 800-7267 www.samsung.com

PUERTO RICO 1-800-682-3180 www.samsung.com

REP. DOMINICA 1-800-751-2676 www.samsung.com

TRINIDAD & TOBAGO 1-800-SAMSUNG(726-7864) www.samsung.com

VENEZUELA 0-800-100-5303 www.samsung.com

Customer Care Center 

0800-124-421
4004-0000

www.samsung.com

Web Site

LCD TV

user manual

BN68-02929A-00

imagine the possibilities

Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at

www.samsung.com/register

Model Serial No.

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
Product design and specifications may be changed without notice.

Important Warranty Information Regarding Television Format Viewing

See the warranty card for more information on warranty terms.

✎

Wide screen format LCD Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full­motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model
offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark sidebars on
nonexpanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week.
Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer
graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines
can cause uneven aging of LCD Displays that leave subtle, but permanent burned-in ghost images in the LCD picture. To avoid this, vary the
programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On LCD models that offer picture
sizing features, use these controls to view different formats as a full screen picture.
Be careful in the selection and duration of television formats used for viewing. Uneven LCD aging as a result of format selection and use, as well as
burned-in images, are not covered by your Samsung limited warranty.

Still image warning

Avoid displaying still images (such as jpeg picture files) or still image elements (such as TV channel logos, panorama or 4:3 image format, stock
or news bars at screen bottom etc.) on the screen. Constant displaying of still pictures can cause ghosting of LCD screen, which will affect image
quality. To reduce risk of this effect, please follow below recommendations:

Avoid displaying the same TV channel for long periods.•
Always try to display any image on full screen, use TV set picture format menu for best possible match.•
Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout •

process.
Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.•

Securing the Installation Space

Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.

When using a stand or wall-mount, use parts provided by Samsung Electronics only.

✎

If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.

x

The appearance may differ depending on the product.

✎

Installation with a stand. Installation with a wall-mount.

4inches

4inches

4inches

© 2010 Samsung Electronics Co., Ltd. All rights reserved.

English

2

4inches

4inches

4inches

4inches

3

Contents

English

ENGLISH

Getting Started

List of Features y ......................................................... 4

Accessories y .............................................................. 4

Viewing the Control Panel y ......................................... 4

Viewing the Remote Control y ...................................... 5

Connecting to an Antenna y ........................................ 6

Plug & Play (Initial Setup) y ........................................... 6

Connections

Connecting to an AV Device y ......................................7

Connecting to an Audio Device y .................................8

Connecting to a PC y ..................................................8

Changing the Input source y ........................................ 9

Basic Features

How to Navigate Menus y .......................................... 10

Channel Menu y ........................................................ 10

Seeing Channels 10
Using Favorite Channels 11
Memorizing channels 11
Editing channels 11
Other Features 11

Picture Menu y .......................................................... 12

Changing the Preset Picture Mode 12
Adjusting picture settings 12
Economical Solutions 13
Changing the Picture Options 13
Setting up the TV with your PC 14

Sound Menu y ...........................................................15

Changing the Preset Sound Mode 15
Adjusting sound settings 15
Sound Settings 15

Setup Menu y ............................................................16

Setting the Time 16
Using the Sleep Timer 16
Setting the On/Off Time 16
Locking Programs 17
Other Features 17
Picture In Picture (PIP) 18

Support Menu y ......................................................... 19

Advanced Features

Media Play y ..............................................................20

Connecting a USB Device 20
Screen Display 21
Playing Multiple Files 24
Media Play - Additional Functions 24

Anynet+ y .................................................................26

Setting Up Anynet+ 27
Switching between Anynet+ Devices 27
Recording 27
Listening through a Receiver 28
Troubleshooting for Anynet+ 28

Other Information

FM Transmitter Setup y ............................................. 29

Frequency Configuration 29
FM Transmitter Installation Guide 29
Supported FM Transmitter formats 30

Installing the Wall Mount y ......................................... 31

Securing the TV to the Wall y .....................................32

Anti-theft Kensington Lock y ...................................... 32

Troubleshooting y ......................................................33

Specifications y ......................................................... 36

License 36

Index y ...................................................................... 37

Check the Symbol!

t

This function can be used by pressing the

TOOLS button on the remote control.

✎

Note :

Important information

O

Step by step guide :

Informs you how to access

the menu.

Getting Started

List of Features

Media Play y : Allows you to play music files, pictures, and movies saved on a USB device. (P. 20)
Self Diagnosis y : You can check picture and sound operation. (P. 19)

Accessories

Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.

✎

The items' colors and shapes may vary depending on the models.

✎

Remote Control & Batteries (AAA x 2) (Not available in some locations) y
Owner’s Instructions y
Warranty Card / Safety Guide (Not available in some locations) y

(M4 X L16)

FM Transmitter ▪

(Not available in some locations)

For more detailed information,

✎

please refer to stand guide.

Screws (3EA) ▪

Viewing the Control Panel

The product color and shape may vary depending on the model.

✎

Cleaning Cloth y
Power Cord y

Remote control sensor Power Indicator

Speakers

P

(Power)

Remote control sensor Aim the remote control towards this spot on the TV.

SOURCE

MENU Displays an on-screen menu, the OSD (on screen display), of your TV’s features.

y

z

Power Indicator Blinks and turns off when the power is on and lights up in standby mode.

Standby mode

Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount
of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.

4

E

English

Turns the TV on or off.

Toggles between all the available input sources. In the on-screen menu, use this
button as you would use the ENTERE button on the remote control.

Adjusts the volume. In the OSD, use the
◄ and ► buttons on the remote control.

Changes the channels. In the OSD, use the
▼ and ▲ buttons on the remote control.

y

z

buttons as you would use the

buttons as you would use the

5

01 Getting Started

English

Viewing the Remote Control

FAV.CH

MTS

SLEEP

Turn the TV on and off.

Press to directly access to channels.

Not available.

Adjust the volume.

Displays channel list on the screen. (P. 10)

Views the Media Play. (P. 20)

Quickly select frequently used functions.

Selects on-screen menu items and

change menu values.

Returns to the previous menu.

Buttons in Channel List, Media Play

menu, etc.

Use these buttons in Media Play and

Anynet+ modes.

(: controls recording on Samsung

recorders with the Anynet+ feature)

Displays and selects the available video
sources. (P. 9)

Returns to the previous channel.

Cuts off the sound temporarily.

Changes channels.

Display the main on-screen menu.
Select the HDMI mode directly.

Press to display information on the TV screen.

Exits the menu.

S.MODE: Select the sound mode. (P. 15)
P.MODE: Select picture mode. (P. 12)
MTS: Press to choose stereo, mono or Separate

Audio Program (SAP broadcast). (P. 15)

FAV.CH: Display Favorite Channel Lists on the

screen. (P. 11)

P.SIZE: Choose the picture size. (P. 13)
SLEEP: Automatically shuts off the TV at a

present time. (P. 16)

Installing batteries (Battery size: AAA)

NOTE

✎

Use the remote control within 23 feet from the TV.

x

Bright light may affect the performance of the remote

x

control. Avoid use when nearby fluorescent lights or neon
signs.

The color and shape may vary depending on the model.

x

Getting Started

Connecting to an Antenna

When the TV is initially powered on, basic settings proceed automatically.

Connecting the power cord and antenna.

✎

VHF/UHF Antenna

or

Power Input

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the

POWERP button. Plug & Play is available only when the Input source is set to TV.

To return to the previous step, press the red button.

✎

Selecting a language

1

Selecting Store Demo

2

or Home Use

Selecting an antenna

Press the ▲ or ▼ button, then press the ENTERE button.
Select the desired OSD (On Screen Display) language.

Press the ◄ or ► button, then press the ENTERE button.

Select the y Home Use mode. Store Demo Mode is for retail
environments.

To return the unit’s settings from y Store Demo to Home Use
(standard): Press the volume button on the TV. When you see the
volume in the OSD, press and hold MENU for 5 sec.

Press the ▲ or ▼ button, then press the ENTERE button. Select Air, Cable or Air+Cable.

Cable

ANT OUT

3

Selecting a channel The channel search will start automatically.

4

Setting the Clock

5

Viewing the HD

6

Connection Guide.
Enjoy your TV.

For more information, refer to Channel → Auto Program. (P. 11)

Press the ✎ENTERE button at any time to interrupt the memorization process.

Press the ◄ or ► button to select Day, Month, Year, Hour, Minute or am/pm.
Set these by pressing the ▲ or ▼ button.
The connection method for the best HD screen quality is displayed.

Press the ENTERE button.

7

If You Want to Reset This Feature...

MENU

O m

6

→ Setup → Plug & Play → ENTERE.

English

Setup

Plug & Play

Time

Menu Language : English

Caption : Off

Security

General

PIP : Off

HDMI IN 3

P

R PB Y

R-AUDIO-L

P

R PB Y

HDMI IN 3

WY

W Y

BGR

W

W

BGR

R

R

R

R

R-AUDIO-L

P

R PB Y

W W

BGRRWY

W W

BGRR

R-AUDIO-L

P

R PB Y

Connections

Connecting to an AV Device

Using an HDMI / DVI Cable: HD connection (up to 1080p)

We recommend using the HDMI connection for the best quality HD picture. Available devices: DVD, Blu-ray player, HD cable
box, HD satellite receiver (STB).

BD/DVD player/

HD cable/sat box

Device

02 Connections

Red White

HDMI OUT

HDMI IN 1(DVI) ✎, 2, 3 / PC/DVI AUDIO IN

When using an HDMI/DVI cable connection, you must use the

x

HDMI IN 1(DVI) jack for video. A DVD, Blu-ray player,

HD cable box, HD STB satellite receiver, cable box, or STB satellite receiver may require a DVI-HDMI (DVI to HDMI)
cable or DVI-HDMI (DVI to HDMI) adapter. The PC/DVI AUDIO IN jack is required for audio.

If an external device such as a DVD / Blu-ray player / cable box / satellite receiver (Set-Top Box) supporting HDMI

x

versions older than 1.3 is connected, the TV may operate abnormally (e.g. no screen display / no sound / annoying
flicker / abnormal color).

If there is no sound after connecting an HDMI cable, check the HDMI version of the external device. If you suspect the

x

version is older than 1.3, contact the provider of the device to confirm the HDMI version and request an upgrade.
It is recommended you purchase an HDMI-certified cable. Otherwise, the screen may appear blank or a connection

x

error may occur.

Using a Component Cable: (up to 1080p), Using an Audio / Video Cable: (480i only)

Available devices: VCR, DVD, Blu-ray player, cable box, STB satellite receiver

AUDIO OUT

DVI OUT

VCR

When connecting to ✎AV IN 1, the
color of the AV IN 1 [Y/VIDEO] jack
(Green) does not match the color of
the video cable (Yellow).

For better picture quality, the

✎

Component connection is
recommended over the A/V
connection.

VIDEO OUT

AUDIO OUT

AUDIO OUT

COMPONENT OUT

Blu-ray player

Yellow Red White Red Blue Green

English

7

Connections

R-AUDIO-L

P

R PB Y

W W

BGRR

Connecting to an Audio Device

Using an Optical (Digital) or Audio (Analog) Cable Connection

Available devices: digital audio system, amplifier, home theater

Red White

DIGITAL AUDIO OUT (OPTICAL)

✎

When a Digital Audio System is connected to the xDIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume
of both the TV and the system.

5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.

x

When the receiver (home theater) is set to on, you can hear sound output from the TV’s optical jack. When the

x

TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theater receiver. When the source is
a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is
connected to the TV via HDMI, only 2 CH audio will be heard from the home theater receiver. If you want to
hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite
receiver directly to an amplifier or home theater.

AUDIO OUT ✎: Connects to the audio input jacks on your amplifier/home theater.

When connecting, use the appropriate connector (sold separately).

x

When an audio amplifier is connected to the xAUDIO OUT jacks: Decrease the volume of the TV and adjust the
volume level with the amplifier’s volume control.

Connecting to a PC

Using an HDMI/DVI Cable / a D-sub Cable

AUDIO IN

Digital Audio System

OPTICAL

DVD

Home Theater

8

English

DVI OUT

AUDIO OUT

PC OUT

AUDIO OUT

9

English

02 Connections

Display Modes (D-Sub and HDMI/DVI Input)

Optimal resolution is 1360x768@60Hz.

Mode Resolution

IBM

MAC

VESA DMT

VESA CVT

VESA GTF 1280 x 720 52.500 70.000 89.040 - / +

NOTE

✎✎

For HDMI/DVI cable connection, you must use the xHDMI IN 1(DVI) jack.
The interlace mode is not supported.

x

The set might operate abnormally if a non-standard video format is selected.

x

Separate and Composite modes are supported. SOG(Sync On Green) is not supported.

x

Input Cables (Sold Separately)

640 x 350 31.469 70.086 25.175 + / ­720 x 400 31.469 70.087 28.322 - / +
640 x 480 35.000 66.667 30.240 - / ­832 x 624 49.726 74.551 57.284 - / -

640 x 480

800 x 600

1024 x 768

1280 x 720 45.000 60.000 74.250 + / +
1360 x 768 47.712 60.015 85.500 + / +

720 x 576 35.910 59.950 32.750 - / +

1280 x 720 56.456 74.777 95.750 - / +

Horizontal Frequency

(kHz)

31.469 59.940 25.175 - / -

37.861 72.809 31.500 - / -

37.500 75.000 31.500 - / -

37.879 60.317 40.000 + / +

48.077 72.188 50.000 + / +

46.875 75.000 49.500 + / +

48.363 60.004 65.000 - / -

56.476 70.069 75.000 - / -

60.023 75.029 78.750 + / +

Vertical Frequency (Hz)

Pixel Clock Frequency

(MHz)

Sync Polarity

(H/V)

HDMI HDMI-DVI Component Composite (AV) Coaxial (RF) VGA

Changing the Input source

Source List

MENU

O m

Use to select TV or an external input sources
such as a DVD / Blu-ray player / cable box /
STB satellite receiver.

TV, AV1, AV2, Component1, ■
Component2, PC, HDMI1/DVI,
HDMI2, HDMI3, USB

→ Input → Source List → ENTER

You can only choose external

✎

devices that are connected to the TV. In the

Source List, connected inputs will be highlighted.
PC ✎ always stay activated.

E

Edit Name

MENU

O m

VCR / DVD / Cable STB / Satellite STB / PVR STB / ■
AV Receiver / Game / Camcorder / PC / DVI PC / DVI
Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name

the device connected to the input jacks to make your
input source selection easier.

When connecting an HDMI/DVI cable to the ✎HDMI IN

1(DVI) port, you should set to DVI PC or DVI Devices

mode under Edit Name.

→ Input → Edit Name → ENTER

E

Basic Features

ABCD

How to Navigate Menus

Before using the TV, follow the steps below to learn how
to navigate the menu in order to select and adjust different
functions.

1

2

3

1 MENU button: Display the main on-screen menu.
2 ENTERE / Direction button: Move the cursor and

select an item. Confirm the setting.

3 RETURN button: Return to the previous menu.
4 EXIT button: Exit the on-screen menu.

How to operate the OSD (On Screen Display)

The access step may differ depending on the selected menu.

The main menu options appear the

1
2

3
4

5
6

7

MENU m

▲ / ▼

ENTER E

▲ / ▼

◄ / ►

ENTER E

EXIT e

screen.

Picture, Sound, Channel, Setup,
Input, Application, Support.

Select an icon with the ▲ or ▼
button.

Press ENTERE to access the
sub-menu.

Select the desired submenu with the
▲ or ▼ button.

Adjust the value of a particular
item with the ◄ or ► button.
The adjustment OSD may differ
depending on the selected menu.

Press ENTERE to confirm the
selection.

Press EXIT.

4

Channel Menu

Seeing Channels ¦

Channel List

MENU Om → Channel → Channel List → ENTERE

Add, delete or set Favorite channels and use
the program guide for broadcasts.

Select a channel in the All Channels, Added
Channels, Favorite or Programmed screen
by pressing the ▲ / ▼ buttons, and pressing
the ENTERE button. Then you can watch the
selected channel.

Added Channels

Air A Antenna B Zoom C Select Page T Tools

■ All Channels: Shows all currently available

■ Added Channels: Shows all added channels.

*

■ Favorite: Shows all favorite channels.

■ Programmed: Shows all currently reserved

Using the color buttons with the ✎Channel List

x
x

x

Select desired channels and press the Yellow button
to set all the selected channels at the same time. The

c

x

T x (Tools): Displays the Channel List option menu.

(The Options menus may differ depending on the
situation.)

Channel Status Display Icons

3 Air

4

Air

*

5
6 Air
7 Air
8 Air
9 Air
10 Air

Red (Antenna): Switches to air or List
Green (Zoom): Enlarges or shrinks a channel

Yellow (Select): Selects multiple channel lists.

mark appears to the left of the selected channels.

(Page): Move to next or previous page.

Air

channels.

programs.

number.

English

10

Icons Operations

A channel selected.

c

A channel set as a Favorite.

*

A reserved Program.

)

A locked channel

\

A program currently being broadcast.

(

11

English

03 Basic Features

Using Favorite Channels ¦

Editing channels ¦

MENU Om → Channel → Channel List → ENTERE

*

Add to Favorite / Delete from Favorite

Set channels you watch frequently as
Favorites.

1. Select a channel and press the TOOLS

button.

2. Add or delete a channel using the Add to
Favorite or Delete from Favorite menu

respectively.

Added Channels

Air A Antenna B Zoom C Select Page T Tools

3 Air

4

Air

*

5
6 Air
7 Air
8 Air
9 Air
10 Air

Air

Delete
Add to Favorite
Lock
Timer Viewing
Channel Name Edit
Select All

t

Memorizing channels ¦

MENU

O m

Antenna (Air / Cable)

Before your television can begin memorizing the available
channels, you must specify the type of signal source that
is connected to the TV (i.e. an Air or a Cable system)

→ Channel → ENTER

t

E

Auto Program

Air ■ : Air antenna signal.
Cable ■ : Cable antenna signal.
Air+Cable ■ : Air and Cable antenna.

After all the available channels are stored, it starts to

✎

remove scrambled channels. The Auto program menu
then reappears.

How to Stop Auto Programming

1. Press the ENTERE button.

2. A message will ask Stop Auto Program? Select Yes by

pressing the ◄ or ► button.

3. Press the ENTERE button.

MENU Om → Channel → Channel List → ENTERE

Channel Name Edit

1. Select a channel and press the TOOLS button.

2. Edit the channel name using the Channel Name Edit.
Channel Name Edit ■ : Assign your own channel name.

t

Other Features ¦

MENU

O m

→ Channel → ENTER

E

Channel List

MENU Om → Channel → Channel List → ENTERE

t

t

: Lock a channel so that the

Channel List Option Menu

Set each channel using the Channel List menu options
(Add / Delete, Lock / Unlock, Timer Viewing, Select All /
Deselect All). Option menu items may differ depending on
the channel status.

1. Select a channel and press the TOOLS button.

2. Select a function and change its settings.
Add / Delete ■ : Delete or add a channel to display the

channels you want.

NOTE

✎

All deleted channels will be shown on the xAll
Channels menu.

A gray-colored channel indicates the channel

x

has been deleted.
The xAdd menu only appears for deleted

channels.
Delete a channel from the xAdded Channels or

Favorite menu in the same manner.

Lock / Unlock ■

channel cannot be selected and viewed.

NOTE

✎

This function is available only when the xChild
Lock is set to On.
The PIN input screen appears. Enter your

x

4-digit PIN, the default of which is “0-0-0-0”.
Change the PIN using the Change PIN option.

Basic Features

Timer Viewing ■ : You can set a desired channel to be
displayed automatically at the set time; even when you
are watching another channel. Set the current time first
to use this function. (P. 16)

1. Press the ◄ / ► /▲ / ▼ buttons to select the
desired channel in Channel List.

2. Press the TOOLS button, then select Timer Viewing.

3. Scroll up or down to adjust the settings in the box,

or use the numeric buttons on your remote for
entering the date and time.

If you selected ✎Once, Every Week or Every Day
in Repeat, you can enter the date you want.

4.

Select OK, then press the ENTERE button when done.

NOTE

✎

Only memorized channels can be reserved.

x

Reserved programs will be displayed in the

x

Programmed menu.
Select All ■ : Select all the channels in the channel list.
Deselect All ■ : Deselect all the selected channels.

You can only select ✎Deselect All when one or
more channels are selected.

Programmed

(in Channel List)
You can view, modify or delete a show you have reserved to

watch.

1. Press the

2. Press the ◄ and ▼ button move to the Programmed

menu.

Change Info ■ : Change a show you have reserved to watch.
Cancel Schedules ■ : Cancel a show you have reserved to

watch.
Information ■ : Display a show you have reserved

to watch. (You can also change the reservation
Information.)

Select All / Deselect All: ■ You can select or deselect all
channels in the channel list.

ENTERE

button to select Channel List.

Fine Tune

If the reception is clear, you do not have to fine tune the
channel, as this is done automatically during the search and
store operation. If the signal is weak or distorted, fine tune
the channel manually.

Select y Fine Tune in the Channel menu.
Fine tuned channels that have been saved are marked

✎

with an asterisk “*” on the right-hand side of the
channel number in the channel banner.

To reset the fine-tuning, select ✎Reset.

Color System
(Auto / PAL-M / PAL-N / NTSC)

Normally the TV can receive image and sound with good
quality in Auto mode. This mode detects the color signal
sources automatically. If the color implementation is
unsatisfactory, select any of PAL-M, PAL-N or NTSC.

Picture Menu

Changing the Preset Picture Mode ¦

MENU

O m

→ Picture → Mode → ENTER

E

Mode

Select your preferred picture type by
pressing the P.MODE button.

Dynamic ■ : Suitable for a bright room.
Standard ■ : Suitable for a normal

environment.

Movie ■ : Suitable for watching movies in a dark room.

Adjusting picture settings ¦

MENU

O m

→ Picture → Backlight → ENTER

E

Backlight / Contrast / Brightness /
Sharpness / Color / Tint (G/R)

Your television has several setting options for picture quality
control.

NOTE

✎

When you make changes to xBacklight, Contrast,
Brightness, Sharpness, Color or Tint (G/R), the
OSD will be adjusted accordingly.

In PC mode, you can only make changes to

x

Backlight, Contrast and Brightness.
Settings can be adjusted and stored for each

x

external device connected to the TV.

12

English

13

English

03 Basic Features

Economical Solutions ¦

ECO Solution

MENU

O m

Energy Saving ■
/ Picture Off / Auto): This adjust the brightness of the

TV in order to reduce power consumption. If you select
Picture Off, the screen is turned off , but the sound
remains on. Press any button except volume button to
turn on the screen.

No Signal Power Off (Off / 15 min / 30 min / 60 min) ■
Sets how quickly the TV switches to standby mode, if no
picture is being received.

→ Picture → ECO Solution → ENTER

t

Disabled when the PC is in power saving mode.

✎

(Off / Low / Medium / High

E

Picture Options

White Balance ■ : Adjust the color temperature for a more

natural picture.
R-Offset / G-Offset / B-Offset: Adjust each color's

(red, green, blue) darkness.
R-Gain / G-Gain / B-Gain : Adjust each color's (red,

green, blue) brightness.
Reset: Resets the White Balance to it's default

settings.

Flesh Tone ■ : Emphasize pink "flesh tone".
Edge Enhancement (Off / On) ■ : Emphasize object

boundaries.

MENU

O m

ENTER

→ Picture → Picture Options →

E

Changing the Picture Options ¦

Advanced Settings

MENU

O m

ENTER

(available in Standard / Movie mode)
Compared to previous models, new Samsung TVs have a

more precise picture.

In PC mode, you can only make changes to ✎Dynamic
Contrast, Gamma and White Balance.

Black Tone : Off ►

Dynamic Contrast : Medium

Shadow Detail : 0

Gamma : 0

RGB Only Mode : Off

Color Space : Native

White Balance

Black Tone (Off / Dark / Darker / Darkest) ■ : Select the
black level to adjust the screen depth.

Dynamic Contrast (Off / Low / Medium / High) ■ :
Adjust the screen contrast.

Shadow Detail ■ : Increase the brightness of dark images.

Gamma ■ : Adjust the primary color intensity.
RGB Only Mode (Off / Red / Green / Blue) ■ :

Displays the Red, Green and Blue color for making fine
adjustments to the hue and saturation.

Color Space (Auto / Native) ■ : Adjust the range of colors
available to create the image.

→ Picture → Advanced Settings →

E

Advanced Settings

▼

U Move E Enter R Return

Disabled under PC mode.

✎

In PC mode, you can only make changes to the ✎Color
Ton e, Size and Auto Protection Time.

Picture Options

Color Tone : Normal ►

Size : 16:9

Digital Noise Filter : Auto

MPEG Noise Filter : Auto

HDMI Black Level : Normal

Film Mode : Off

Auto Protection Time : 2 hours

U Move E Enter R Return

Color Tone (Cool / Normal / Warm1 / Warm2) ■

Warm1 ✎ or Warm2 will be deactivated when the

picture mode is Dynamic.
Settings can be adjusted and stored for each

✎

external device connected to an input on the TV.

Size ■ : Your cable box/satellite receiver
may have its own set of screen sizes as
well. However, we highly recommend
you use 16:9 mode most of the time.

16:9: Sets the picture to 16:9 wide
mode.

Zoom1: Use for moderate magnification.
Zoom2: Use for a stronger magnification.
Wide Fit: Enlarges the aspect ratio of the picture to fit

the entire screen.
4:3: Sets the picture to basic (4:3) mode.

Do not watch in 4:3 format for a long time. Traces

✎

of borders displayed on the left, right and center
of the screen may cause image retention (screen
burn) which are not covered by the warranty.

Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are input.

Basic Features

NOTE

✎

After selecting xZoom1, Zoom2 or Wide Fit:

1. Press the ► button to select Position.

2. Press the ENTERE button.

3. Press the ▲ or ▼ button to move the picture up

or down.

4. Press the ENTERE button.

5. Press the ► button to select Reset.

6. Press the ENTERE button to reset the picture

to its default position.

After selecting xScreen Fit in HDMI (1080i / 1080p)
or Component (1080i / 1080p) mode: Adjusts the
Position or Size by using ▲, ▼, ◄ or ► button.

HD (High Definition): 16:9 - 1080i/1080p (1920x1080),

x

720p (1280x720)
Settings can be adjusted and stored for each

x

external device you have connected to an input on
the TV.

Input Source Picture Size

TV, AV,
Component (480i, 480p)
Component (1080i, 1080p),
HDMI (720p, 1080i, 1080p)
PC 16:9, 4:3

Digital Noise ■
/ Auto Visualization / Demo):
received by your TV is weak, you can activate the Digital
Noise Filter feature to reduce any static and ghosting that

may appear on the screen.

✎

Auto Visualization : When changing analog channels,
displays signal strength.

✎
✎

MPEG Noise Filter (Off / Low / Medium / High / ■
Auto): Reduces MPEG Noise of the picture.

✎

HDMI Black Level (Normal / Low) ■ : Selects the black
level on the screen to adjust the screen depth.

✎

Film Mode (Off / Auto1 / Auto2) ■ : Sets the TV to
automatically sense and process film signals from all
sources and adjusts the picture for optimum quality.

✎

Auto Protection Time (2 hours / 4 hours / 8 hours ■
/ 10 hours / Off): If the screen remains idle with a still

image for a certain period of time defined by the user,
the screen saver is activated to prevent the formation of
ghost images on the screen.

Filter (Off / Low / Medium / High / Auto

When the signal is weak, try other options until the
best picture is displayed.

Only available for analog channels.
When bar is green, you are receiving the best

possible signal.

Disabled under PC mode.

Available only in HDMI mode (RGB signals).

Available in TV, AV, COMPONENT (480i / 1080i)
and HDMI (480i / 1080i).

16:9, Zoom1,
Zoom2, 4:3

16:9, 4:3, Wide Fit,
Screen Fit

If the broadcast signal

Picture Reset (OK / Cancel)

Resets your current picture mode to its default settings.

Setting up the TV with your PC ¦

Set the input source to PC.

Auto Adjustment

MENU

O m

ENTER

Adjust frequency values/positions and fine tune the settings
automatically.

Not available when connecting through HDMI/DVI

✎

cable.

→ Picture → Auto Adjustment →

E

t

Screen

Coarse / Fine: ■ Removes or reduces picture noise. If the

noise is not removed by Fine-tuning alone, then adjust
the frequency as best as possible (Coarse) and Fine­tune again. After the noise has been reduced, readjust
the picture so that it is aligned to the center of screen.

Position: ■ Adjust the PC’s screen positioning if it does
not fit the TV screen. Press the ▲ or ▼ button to adjust
the Vertical-Position. Press the ◄ or ► button to adjust
the Horizontal-Position.

Image Reset: ■ Resets the image to default settings.

Using Your TV as a Computer (PC) Display

Setting Up Your PC Software (Based on Windows XP)
Depending on the version of Windows and the video card,

the actual screens on your PC will probably look different, but
the same basic set-up information will apply in most cases.
(If not, contact your computer manufacturer or Samsung
Dealer.)

1. Click on “Control Panel” on the Windows start menu.

2. Click on “Appearance and Themes” in the “Control

Panel” window and a display dialog-box will appear.

3. Click on “Display” and a display dialog box will appear.

4. Navigate to the “Settings” tab on the display dialog-box.

The correct size setting (resolution) y
[Optimum: 1360x768 pixels]

If a vertical-frequency option exists on your display y
settings dialog box, the correct value is ‘60’ or ‘60 Hz’.
Otherwise, just click ‘OK’ and exit the dialog box.

14

English

15

English

03 Basic Features

Sound Menu

Changing the Preset Sound Mode ¦

MENU

O m

Mode

Standard ■ : Selects the normal sound

mode.

Music ■ : Emphasizes music over voices.
Movie ■ : Provides the best sound for

movies.

Clear Voice ■ : Emphasizes voices over other sounds.
Amplify ■ : Amplify mode is for people who have difficulty

in hearing.

→ Sound → Mode → ENTER

t

E

Adjusting sound settings ¦

MENU

O m

→ Sound → Equalizer → ENTER

E

Equalizer

Adjusts the sound mode.

Balance L/R ■ : Adjusts the balance between the right and
left speaker.

100Hz / 300Hz / 1KHz / 3KHz / 10KHz ■ (Bandwidth
Adjustment): Adjusts the level of specific bandwidth
frequencies.

Reset ■ : Resets the equalizer to its default settings.

Sound Settings ¦

Virtual Surround (Off / On)

(standard sound mode only)
This function provides a virtual 5.1 channel surround sound

experience through a pair of speakers or headphones using
HRTF (Head Related Transfer Function) technology.

If ✎Speaker Select is set to External Speaker, Virtual

Surround is disabled.

Dialog Clarity (Off / On)

(standard sound mode only)
Dialog Clarity emphasizes voice while maintaining the

background sound level.

Multi-Track Sound (MTS)

(analog channels only)

Mono ■ : Choose for channels that are
broadcasting in mono or if you are
having difficulty receiving a stereo signal.

Stereo ■ : Choose for channels that are
broadcasting in stereo.

SAP ■ : Choose to listen to the Separate Audio Program,
which is usually a foreign-language translation.

Depending on the particular program being

✎

broadcasted, you can listen to Mono, Stereo or SAP.

Auto Volume (Off / Normal / Night)

To equalize the volume level on each channel, set to Normal.

Night ■ : This mode provides an improved sound

experience compared to Normal mode, making almost
no noise. It is useful at night.

Speaker Select
(External Speaker / TV Speaker)

A sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver. In
this case, set the TV to External Speaker.

When ✎Speaker Select is set to External Speaker, the
volume and MUTE buttons will not operate and the
sound settings will be limited.

When ✎Speaker Select is set to External Speaker, you
should use these settings.

TV speaker: Off External speaker: On

x

When ✎Speaker Select is set to TV Speaker, you
should use these settings.

TV speaker: On External speaker: On

x

If there is no video signal, both speakers will be mute.

✎

SPDIF Output

SPDIF (Sony Philips Digital Interface) is used to provide digital
sound, reducing interference going to speakers and various
digital devices such as an A/V Receiver/Home theater.

Audio Format: ■ During the reception of a digital TV
broadcast, you can select the Digital Audio output
(SPDIF) format from the options PCM or Dolby Digital.

By connecting to 5.1ch speakers in a dolby

✎

digital setup, maximize your interactive 3D sound
experience.

Audio Delay ■ : Correct audio-video mismatch, when
watching TV or video, and listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).

Basic Features

FM Transmitter

You can listen to TV sound FM receiver speaker by
transmitting audio signals by FM frequencies.

Connecting a FM Transmitter

Not available in some locations.

✎

You can listen to TV sound from FM receiver speaker
by transmitting audio signals by FM frequencies.

For more detailed information, refer to “ ✎FM Transmitter
Setup”. (P. 29)

TV Side Panel

FM Transmitter

Insert FM Transmitter Module into the Socket which is
located at the side of TV.

FM Transmitter (Off / On) ■ : Turns FM Transmitter on / off.
FM Frequency ■ : Sets FM Transmitter Frequency.

Sound Reset (OK / Cancel)

Reset all sound settings to the factory defaults.

Setup Menu

Setting the Time ¦

MENU

O m

→ Setup → Time → ENTER

E

Time

Clock ■ : Setting the clock is for using various timer

features of the TV.

The current time will appear every time you press

O

the INFO button.

If you disconnect the power cord, you have to set

✎

the clock again.
You can set the ✎Day, Month, Year, Hour and

Minute directly by pressing the number buttons
on the remote control.

Using the Sleep Timer ¦

MENU

O m

ENTER

Sleep Timer ■

shuts off the TV after a preset period
of time. (30, 60, 90, 120, 150 and 180
minutes).

→ Setup → Time → Sleep Timer →

E

t

To cancel the ✎Sleep Timer, select

Off.

: Automatically

Setting the On/Off Time ¦

MENU

O m

ENTER

Timer 1 / Timer 2 / Timer 3 ■ : Three different on / off

timer settings can be made. You must set the clock first.

On Time

Off Time

Volume Source Antenna

Repeat

On Time / Off Time: Set the hour, minute, am/pm
and activate / inactivate. (To activate the timer with the
setting you have chosen, set to Activate.)

Volume: Set the desired volume level.
Source: Select the TV or USB device content to be

played when the TV turns on automatically. Select TV or
USB. (USB can be selected only when a USB device is

connected to the TV.)

Antenna (when Source is set to TV): Select Air or Cable.
Channel (when the Source is set to TV): Select the

desired channel.
Contents (when the Source is set to USB): Select a

folder in the USB device containing music or photo files
to be played when the TV is turned on automatically.

→ Setup → Time → Timer 1 →

E

Timer 1

▲

Inactivate 12 00 am

▼

Inactivate 12 00 am

Channel

10 TV Air

Once

If there is no music file on the USB device or the

✎

folder containing a music file is not selected, the
Timer function does not operate correctly.

When there is only one photo file in the USB, the

✎

Slide Show will not play.
If a folder name is too long, the folder cannot be

✎

selected.
Each USB you use is assigned its own folder.

✎

When using more than one of the same type of
USB, make sure the folders assigned to each USB
have different names.

Sun Mon Tue Wed Thu Fri Sat

L Move U Adjust E Enter R Return

0

16

English

17

English

03 Basic Features

Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat,
Sat~Sun or Manual to set at you convenience. If you

select Manual, you can set up the day you want to
activate the timer.

The

✎ c

Auto Power Off (available only when the TV is turned

✎

on by the Timer): The TV will be automatically turned off
after 3 hours of being left idle to prevent overheating.

mark indicates the day is selected.

Locking Programs ¦

MENU

O m

→ Setup → Security → ENTER

E

Security

The PIN input screen appears before the setup screen.

✎

Enter your 4-digit PIN, the default of which is 0-0-0-0.

✎

Change the PIN using the Change PIN option.
Child Lock (Off / On) ■ : Lock channels in Channel List,

to prevent unauthorized users, such as children, from
watching unsuitable program.

Change PIN ■ : The Change PIN screen will appear.
Choose any 4 digits for your PIN and enter them. As
soon as the 4 digits are entered, the Confirm New
PIN screen appears. Re-enter the same 4 digits. When
the Confirm screen disappears, your PIN has been
memorized.

If you forget the PIN, press the remote-control

✎

buttons in the following sequence, which resets
the pin to “0-0-0-0” : POWER (off) → MUTE → 8
→ 2 → 4 → POWER (on).

Other Features ¦

MENU

O m

→ Setup → ENTER

E

Menu Language

Set the menu language.

1. Select Menu Language and press the ENTERE button.

2. Choose desired language and press the ENTERE

button.

Caption

(On-Screen Text Messages)

Caption (Off / On) ■ : You can switch the caption function
on or off. If captions are not available, they will not be
displayed on the screen.

The Caption feature does not work in Component,

✎

HDMI or PC modes.

Caption Mode ■ : You can select the desired caption
mode.

The availability of captions depends on the

✎

program being broadcasted.

CC1~CC4 / Text1~Text4: The Analog Caption function
operates in either analog TV channel mode or when a
signal is supplied from an external device to the TV.

Basic Features

General

Game Mode (Off / On) ■ : When connecting to a game

console such as PlayStation™ or Xbox™, you can enjoy
a more realistic gaming experience by selecting the
game menu.

NOTE

✎

Precautions and limitations for game mode

x

To disconnect the game console and connect –
another external device, set Game Mode to Off in
the setup menu.

If you display the TV menu in – Game Mode, the
screen shakes slightly.

Game Mode x is not available when the input source

is set to TV or PC.
After connecting the game console, set xGame Mode

to On. Unfortunately, you may notice reduced picture
qualit y.

If xGame Mode is On:

Picture – mode is set to Standard and Sound mode
is set to Movie.

Equalizer – is not available.

Menu Transparency (Birght / Dark) ■ : Set the

Transparency of the menu.
Melody (Off / Low / Medium / High) ■ : Set so that a

melody plays when the TV is turned on or off.

NOTE

✎

Only available when the Input source is set to TV.

x

To turn the melody off, set Melody to Off.
The xMelody does not play.

When no sound is output from the TV because the –

MUTE button has been pressed.

When no sound is output from the TV because the –
volume has been reduced to minimum with the

VOL – button.

When the TV is turned off by – Sleep Timer function.

AV Color System ( Auto / PAL-M / PAL-N / NTSC ) ■

Normally the TV can receive image and sound with good
quality when in the mode AUTO. This mode detects the
signal color system automatically. In case of some signal
reception with color unsatisfactory, select the AV Color
System Mode to PAL-M, PAL-N or NTSC.

This function is available only in AV mode.

✎

Picture In Picture (PIP) ¦

t

PIP

MENU

O m

You can watch the TV tuner and one external video source
simultaneously. PIP (Picture-in-Picture) does not function in
the same mode.

NOTE

✎

For PIP sound, refer to the Sound Select instructions.

x

If you turn the TV off while watching in PIP mode, the

x

PIP window will disappear.
You may notice that the picture in the PIP window

x

becomes slightly unnatural when you use the main
screen to view a game or karaoke.

PIP Settings

x

PIP (Off / On) ■ : Activate or deactivate the PIP function.
Air/Cable (Air / Cable) ■ : Select either Air or Cable as the

input source for the sub-screen.

Channel ■ : Select the channel for the sub-screen.
Size ( ■
Position ( ■

sub-picture.
Sound Select (Main / Sub) ■ : You can choose the

desired sound (Main or Sub) in PIP mode.

→ Setup → PIP → ENTER

Main picture Sub picture
HDMI1/DVI, HDMI2, HDMI3,

Component1, 2, PC

Õ

/ Ã): Select a size for the sub-picture.

Ã

/ – / — / œ): Select a position for the

E

TV

18

English

19

English

03 Basic Features

Support Menu

USB HDMI IN 3

MENU

O m

→ Support → ENTER

E

Self Diagnosis

Picture Test ■ : Use to check for picture problems. If the

problem continues to occur, check the Color pattern.
Yes: If the test pattern does not appear or there is

noise in the test pattern, select Yes. There may be a
problem with the TV. Contact Samsung’s Call Center for
assistance.

No: If the test pattern is properly displayed, select No.
There may be a problem with your external equipment.
Please check your connections. If the problem persists,
refer to the external device’s user manual.

Sound Test ■ : Use the built-in melody sound to check for
sound problems.

If you hear no sound from the TV’s speakers,

✎

before performing the sound test, make sure

Speaker Select is set to TV speaker in the
Sound menu.

The melody will be heard during the test even if

✎

Speaker Select is set to External Speaker or the
sound is muted by pressing the MUTE button.

Yes: If you can hear sound only from one speaker or not
at all during the sound test, select Yes. There may be a
problem with the TV. Contact Samsung’s Call Center for
assistance.

No: If you can hear sound from the speakers, select No.
There may be a problem with your external equipment.
Please check your connections. If the problem persists,
refer to the external device’s user manual.

Troubleshooting ■ : If the TV seems to have a problem,
refer to this description.

If none of these trouble shooting tips apply,

✎

contact the Samsung customer service center.

Software Upgrade

Software Upgrade can be performed by downloading the

latest firmware from samsung.com to a USB memory device.
Current Version - the software already installed in the TV.

Software is represented as ‘Year/Month/Day_Version’.

✎

Software Upgrade

Current Version 2010/11/29_000334

By USB ►

Alternative Software

U Move E Enter R Return

Installing the Latest Version

By USB ■ : Insert a USB drive

containing the firmware
upgrade file, downloaded
from www.samsung.com,
into the TV. Please be careful
not to disconnect the power
or remove the USB drive
until upgrades are complete.
The TV will be turned off and on automatically after
completing the firmware upgrade. When software is
upgraded, video and audio settings you have made will
return to their default settings. We advise you to write
down your settings so that you can easily reset them
after the upgrade.

Alternative Software ■ (Not available)

TV Side Panel

USB Drive

HD Connection Guide

Refer to this information when connecting external devices
to the TV.

Contact Samsung

View this information when your TV does not work properly
or when you want to upgrade the software. You can find
information regarding our call centers and how to download
products and software.

Advanced Features

USB HDMI IN 3

SUM

Media Play

Enjoy photos, music and/or movie files saved on a
USB Mass Storage Class (MSC) device.

MENU

O m

ENTER

→ Application → Media Play →

E

MediaPlay

Videos

Change Device

View Devices E Enter R Return

Connecting a USB Device ¦

1. Turn on your TV.

2. Connect a USB device containing photo, music and/or movie files to the

USB jack on the side of the TV.

3. When USB is connected to the TV, popup window appears.

Then you can select Media Play.

It might not work properly with unlicensed multimedia files.

✎

Need-to-Know List before using ✎Media Play

MTP (Media Transfer Protocol) is not supported.

x

The file system supports FAT16, FAT32 and NTFS.

x

Certain types of USB Digital camera and audio devices may not be compatible with this TV.

x

Media Play only supports USB Mass Storage Class (MSC) devices. MSC is a Mass Storage Class Bulk-Only

x

Transport device. Examples of MSC are Thumb drives, Flash Card Readers (USB HUB are not supported). Devices
should be connected directly to the TV’s USB port.

Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data.

x

SAMSUNG is not responsible for any data file damage or data loss.
Do not disconnect the USB device while it is loading.

x

The higher the resolution of the image, the longer it takes to display on the screen.

x

The maximum supported JPEG resolution is 15360X8640 pixels.

x

For unsupported or corrupted files, the “Not Supported File Format” message is displayed.

x

If the files are sorted by Basic View, up to 1000 files can be displayed in each folder.

x

MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management

x

(DRM) is a technology that supports the creation, distribution and management of the content in an integrated and
comprehensive way, including the protection of the rights and interests of the content providers, the prevention of the
illegal copying of contents, as well as managing billings and settlements.

If more than 2 PTP devices are connected, you can only use one at a time.

x

If more than two MSC devices are connected, some of them may not be recognized. A USB device that requires high

x

power (more than 500mA or 5V) may not be supported.
If an over-power warning message is displayed while you are connecting or using a USB device, the device may not

x

be recognized or may malfunction.
If the TV has been no input during time set in xAuto Protection Time, the Screensaver will run.
If a USB HDD supports the energy saving mode, the energy saving mode may be automatically off.

x

If a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read.

x

If a USB device connected to the TV is not recognized, the list of files on the device is corrupted or a file in the list is

x

not played, connect the USB device to the PC, format the device and check the connection.
If a file deleted from the PC is still found when Media Play is run, use the “Empty the Recycle Bin” function on the PC

x

to permanently delete the file.

TV Side Panel

USB Drive

20

English

21

English

04 Advanced Features

Screen Display ¦

Move to the desired file using the up/down/right/left buttons and then press the ENTERE or  (Play) button. The file is
played.

Supports the ✎View Devices and Contents Mode in Media Play homepage.

You can ascertain the selected

file name and the number of files

Displays the sorting standard.

The Sorting standard is

✎

different depending on the

Information :

and page.

Sort List Section :

contents.

Videos

A

Change Device

Operation Button

A

Red (Device) : Selects a connected device.

B

Green (Preference) : Sets the file preference. (not supported in Basic view)

C

Yellow (Select) : Selects multiple files from file list. Selected files are marked with a symbol

D

Blue (Sorting) : Select the sort list.

T

Tools : Displays the option menu.

C

Select D Sorting T Tools

Page

File List Section :
You can confirm the files and
groups that is sorted by each
category.

Using the ✎ or µ button, file list can move to next or previous page.

Videos

Playing Video

1. Press the ◄ or ► button to select Videos, then press the ENTERE button in the Media Play menu.

2. Press the ◄/►/▲/▼ button to select the desired video in the file list.

3. Press the ENTERE button or  (Play) button.

The selected file is displayed on the top with its playing time. –
If video time information is unknown, play time and progress bar are not displayed. –
During video playback, you can search using – ◄ and ► button.

In this mode, you can enjoy movie clips contained on a Game,

✎

but you cannot play the Game itself.
Supported Subtitle Formats y

Name File extension Format

MPEG-4 time-based text .ttxt XML

SAMI .smi HTML

SubRip .srt string-based
SubViewer .sub string-based
Micro DVD .sub or .txt string-based

SUM

00:04:03 / 00:07:38

Movie 01.avi

E Pause L Jump T Tools R Return

1/12

Advanced Features

Supported Video Formats y

File Extention Container Video Codec Resolution

Divx 3.11 / 4.x / 5.1 / 6.0 1920x1080 6 ~ 30 8

*.avi

*.mkv

*.asf ASF

*.wmv ASF Window Media Video v9 1920x1080 6 ~ 30 25 WMA

*.mp4 MP4

*.3gp 3GPP

*.vro

*.mpg

*.mpeg

*.ts
*.tp

*.trp

AVI

MKV

VRO
VOB

PS

TS

XviD 1920x1080 6 ~ 30 8

H.264 BP / MP / HP 1920x1080 6 ~ 30 25

MPEG4 SP / ASP 1920x1080 6 ~ 30 8

Divx 3.11 / 4.x / 5.1 / 6.0 1920x1080 6 ~ 30 8

XviD 1920x1080 6 ~ 30 8

H.264 BP / MP / HP 1920x1080 6 ~ 30 25

MPEG4 SP / ASP 1920x1080 6 ~ 30 8

H.264 BP / MP / HP 1920x1080 6 ~ 30 25

MPEG4 SP / ASP 1920x1080 6 ~ 30 8

XVID 1920x1080 6 ~ 30 8

H.264 BP / MP / HP 1920x1080 6 ~ 30 25

MPEG4 SP / ASP 1920x1080 6 ~ 30 8

MPEG1 1920x1080 24 / 25 / 30 30
MPEG2 1920x1080 24 / 25 / 30 30
MPEG1 1920x1080 24 / 25 / 30 30
MPEG2 1920x1080 24 / 25 / 30 30

H.264 1920x1080 6 ~ 30 25

MPEG2 1920x1080 24 / 25 / 30 30

H.264 1920x1080 6 ~ 30 25

VC1 1920x1080 6 ~ 30 25

Frame rate

(fps)

Other Restrictions

NOTE

✎

If there are problems with the contents of a codec, the codec will not be supported.

x

If the information for a Container is incorrect and the file is in error, the Container will not be able to play

x

correctly.
Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/sec

x

listed in the table above.

Bit rate
(Mbps)

Audio Codec

MP3 / AC3 / LPCM /

ADPCM / DTS Core

MP3 / AC3 / LPCM /

ADPCM / WMA

MP3 / ADPCM / AAC

ADPCM / AAC / HE-AAC

AC3 / MPEG / LPCM

AC3 / MPEG / LPCM / AAC

AC3 / AAC / MP3 / DD+

HE-AAC

22

Supports up to H.264, Level 4.1•
H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are •
not supported.
H.263 is not supported.•
GMC 2 is not support. •

English

Video Decoder Audio Decoder

Supports up to WMA 7, 8, 9, STD•
WMA 9 PRO does not support 2 channel excess multi •
channel or lossless audio.
WMA sampling rate 22050Hz mono is not supported.•

23

English

04 Advanced Features

Playing movie continuously (Resume Play)

Movie 01.avi

00:04:03 / 00:07:38 1/1

SUM

3/15

I Love you

Jhon

Music 1

No Singer

Music 2

No Singer

Music 3

No Singer

Music 4

No Singer

Music 5

No Singer

I Love You

Jhon

1st Album
Pop
2010

4.2MB

01:10 / 04:02

SUM

Image1024.jpg 1024x768 2010/2/1 3/15

SUM

If you exit the playing movie function, the movie can be played later from the point where it was stopped.

1. Select the movie file you want to play continuously by pressing

the ◄ or ► button to select it from the file list section.

2. Press the  (Play) / ENTERE button.

3. Select Play Continuously (Resume Play) by pressing the Blue

button. The Movie will begin to play from where it was stopped.

The Blue button is available when resuming play.

✎

If the ✎Continuous Movie Play Help function is set to On
in the Settings menu, a pop-up message will appear
when you resume play a movie file.

Play continuously

Resumes playing from the last viewed
scene.

Play continuously E Pause

Music

Playing Music

1. Press the ◄ or ► button to select Music, then press the

ENTERE button in the Media Play menu.

2. Press the ◄/►/▲/▼ button to select the desired Music in the file

list.

3. Press the ENTERE button or  (Play) button.

During music palyback, you can search using – ◄ and ► button.
 – (REW) and µ buttons do not function during play.

Only displays the files with MP3 and PCM file extension. Other file

✎

extensions are not displayed, even if they are saved on the same
USB device.

If the sound is abnormal when playing MP3 files, adjust the

✎

Equalizer in the Sound menu. (An over-modulated MP3 file may
cause a sound problem.)

E

L

Jump T Tools R Return

Playlist

Pause L Jump T Tools R Return

Photos

Viewing a Photo (or Slide Show)

1. Press the ◄ or ► button to select Photos, then press the ENTERE
button in the Media Play menu.

2. Press the ◄/►/▲/▼ button to select the desired photo in the file list.

3. Press the ENTERE button or  (Play) button.

While a photo list is displayed, press the –
button on the remote control to start the slide show.

All files in the file list section will be displayed in the slide show. –
During the slide show, files are displayed in order. –

Music files can be automatically played during the Slide Show if the

✎

Background Music is set to On.

The ✎BGM Mode cannot be changed until the BGM has finished
loading.



(Play) / ENTERE

Normal

E

Pause L Previous/Next T Tools R Return