Samsung LN32C480 User Manual

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

Contate a SAMSUNG EM TODO O MUNDO

Caso tenha dúvidas ou comentários sobre os produtos da Samsung, entre em contato com o centro de atendimento ao cliente da SAMSUNG.

Country

ARGENTINE 0800-333-3733 www.samsung.com

BRAZIL

CHILE 800-SAMSUNG(726-7864) www.samsung.com

COLOMBIA 01-8000112112 www.samsung.com

COSTA RICA 0-800-507-7267 www.samsung.com

ECUADOR 1-800-10-7267 www.samsung.com

EL SALVADOR 800-6225 www.samsung.com

GUATEMALA 1-800-299-0013 www.samsung.com

HONDURAS 800-7919267 www.samsung.com

JAMAICA 1-800-234-7267 www.samsung.com

MEXICO 01-800-SAMSUNG(726-7864) www.samsung.com

NICARAGUA 00-1800-5077267 www.samsung.com

PANAMA 800-7267 www.samsung.com

PUERTO RICO 1-800-682-3180 www.samsung.com

REP. DOMINICA 1-800-751-2676 www.samsung.com

TRINIDAD & TOBAGO 1-800-SAMSUNG(726-7864) www.samsung.com

VENEZUELA 0-800-100-5303 www.samsung.com

Customer Care Center 

0800-124-421 4004-0000

www.samsung.com

Web Site

LCD TV

user manual

BN68-02936A-00

imagine the possibilities

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/register

Model Serial No.

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and speciﬁcations may be changed without notice.

Important Warranty Information Regarding Television Format Viewing

See the warranty card for more information on warranty terms.

✎

Wide screen format LCD Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format fullmotion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to ﬁll the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark sidebars on nonexpanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week. Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven aging of LCD Displays that leave subtle, but permanent burned-in ghost images in the LCD picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On LCD models that offer picture sizing features, use these controls to view different formats as a full screen picture. Be careful in the selection and duration of television formats used for viewing. Uneven LCD aging as a result of format selection and use, as well as burned-in images, are not covered by your Samsung limited warranty.

Still image warning

Avoid displaying still images (such as jpeg picture ﬁles) or still image elements (such as TV channel logos, panorama or 4:3 image format, stock or news bars at screen bottom etc.) on the screen. Constant displaying of still pictures can cause ghosting of LCD screen, which will affect image quality. To reduce risk of this effect, please follow below recommendations:

Avoid displaying the same TV channel for long periods.• Always try to display any image on full screen, use TV set picture format menu for best possible match.• Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout •

process. Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.•

Securing the Installation Space

Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation. Failing to do so may result in ﬁre or a problem with the product due to an increase in the internal temperature of the product.

When using a stand or wall-mount, use parts provided by Samsung Electronics only.

✎

If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.

The appearance may differ depending on the product.

✎

Installation with a stand. Installation with a wall-mount.

4inches

English

4inches

Contents

English

ENGLISH

POWER

Getting Started

List of Features y ......................................................... 4

Accessories y .............................................................. 4

Viewing the Control Panel y ......................................... 4

Viewing the Remote Control y ...................................... 5

Connecting to an Antenna y ........................................6

Plug & Play (Initial Setup) y ........................................... 6

Connections

Connecting to an AV Device y ......................................7

Connecting to an Audio Device y ................................. 8

Connecting to a PC y ..................................................8

Changing the Input source y ...................................... 10

Basic Features

How to Navigate Menus y .......................................... 10

Using the INFO button (Now & Next guide) y .............11

Planning your viewing y ............................................. 11

Channel Menu y ........................................................ 12

Seeing Channels 12 Using Favorite Channels 12 Memorizing channels 12 Editing channels 13 Other Features 13

Picture Menu y .......................................................... 14

Changing the Preset Picture Mode 14 Adjusting picture settings 14 Economical Solutions 14 Changing the Picture Options 14 Setting up the TV with your PC 16

Sound Menu y ........................................................... 16

Changing the Preset Sound Mode 16 Adjusting sound settings 16 Sound Settings 16

Setup Menu y ............................................................ 17

Setting the Time 17 Using the Sleep Timer 18 Setting the On / Off Timer 18 Locking Programs 18 Other Features 19 Picture In Picture (PIP) 19

Support Menu y ......................................................... 20

Advanced Features

Media Play y .............................................................. 21

Connecting a USB Device 21 Screen Display 22 Playing Multiple Files 25 Media Play - Additional Functions 25

Anynet y

..................................................................27

Setting Up Anynet+ 28 Switching between Anynet+ Devices 28 Recording 28 Listening through a Receiver 29 Troubleshooting for Anynet+ 29

Other Information

FM Transmitter Setup y ............................................. 30

Frequency Conﬁguration 30 FM Transmitter Installation Guide 30 Supported FM Transmitter formats 31

Installing the Wall Mount y ......................................... 32

Securing the TV to the Wall y ..................................... 33

Anti-theft Kensington Lock y ...................................... 33

Troubleshooting y ......................................................34

Speciﬁcations y ......................................................... 37

License 37

Index y ...................................................................... 38

Check the Symbol!

This function can be used by pressing the

TOOLS button on the remote control.

✎

Note :

Important information

Step by step guide :

Informs you how to access

the menu.

Getting Started

List of Features

Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed y without a cable box / STB (Set-Top-Box) satellite receiver.

Media Play

y : Allows you to play music ﬁles, pictures, and movies saved on a USB device. (P. 21)

Self Diagnosis

y : You can check picture and sound operation. (P. 20)

Accessories

Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.

✎

The items' colors and shapes may vary depending on the models.

✎

Remote Control & Batteries (AAA x 2) (Not available in some locations) y Owner’s Instructions

Warranty Card / Safety Guide (Not available in some locations)

FM Transmitter y

(Not available in some locations)

Viewing the Control Panel

The product color and shape may vary depending on the model.

✎

Cleaning Cloth Power Cord

(M4 X L20)

Screws (3EA)

For more detailed information,

✎

please refer to stand guide.

Remote control sensor Power Indicator

Speakers

(Power)

Remote control sensor Aim the remote control towards this spot on the TV.

SOURCE

MENU Displays an on-screen menu, the OSD (on screen display), of your TV’s features.

Power Indicator Blinks and turns off when the power is on and lights up in standby mode.

Standby mode

Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.

English

Turns the TV on or off.

Toggles between all the available input sources. In the on-screen menu, use this button as you would use the ENTERE button on the remote control.

Adjusts the volume. In the OSD, use the ◄ and ► buttons on the remote control.

Changes the channels. In the OSD, use the ▼ and ▲ buttons on the remote control.

buttons as you would use the

01 Getting Started

English

Viewing the Remote Control

FAV.CH

MTS

Turns the TV on and off.

Press to directly access to channels.

Press to select additional channels (digital)

being broadcast by the same station. For

example, to select channel ‘54.3’, press

‘54’, then press ‘-’ and ‘3’.

Adjust the volume.

Displays the channel List on the screen.

(P. 12)

Views Media Play. (P. 21)

Quickly select frequently used functions.

Selects the on-screen menu items and changes the values seen on the menu.

Returns to the previous menu.

Buttons in Channel List, Media Play

menu, etc.

Use these buttons in Media Play and

Anynet+ modes.

(�: controls recording on Samsung

recorders with the Anynet+ feature)

Displays and selects the available video sources. (P. 10)

Returns to the previous channel.

Cuts off the sound temporarily.

Changes channels.

Display the main on-screen menu. Display the EPG (Electronic Program

Guide). (P. 11)

Press to display information on the TV screen. (P. 11)

Exits the menu.

P.MODE: Selects picture mode. (P. 14) S.MODE: Selects the sound mode. (P. 16) MTS: Press to choose stereo, mono or Separate

Audio Program (SAP broadcast). (P. 17)

FAV.CH: Displays Favorite Channel Lists on the

screen. (P. 12)

P.SIZE: Choose the picture size. (P. 15) CC: Controls the caption decoder. (P. 19)

Installing batteries (Battery size: AAA)

NOTE

✎

Use the remote control within 23 feet from the TV.

Bright light may affect the performance of the remote

control. Avoid use when nearby fluorescent lights or neon signs.

The color and shape may vary depending on the model.

Getting Started

POWER

Connecting to an Antenna

When the TV is initially powered on, basic settings proceed automatically.

Connecting the power cord and antenna.

✎

VHF/UHF Antenna

Power Input

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in conﬁguring basic settings. Press the

POWERP button. Plug & Play is available only when the Input source is set to TV.

To return to the previous step, press the red button.

✎

Selecting a language

Selecting Store Demo

or Home Use

Selecting an antenna

Selecting a channel The channel search will start automatically.

Setting the Clock

Mode

Viewing the HD

Connection Guide. Enjoy your TV.

Press the ▲ or ▼ button, then press the ENTERE button. Select the desired OSD (On Screen Display) language.

Press the ◄ or ► button, then press the ENTERE button.

Select the y Home Use mode. Store Demo Mode is for retail environments.

To return the unit’s settings from y Store Demo to Home Use (standard): Press the volume button on the TV. When you see the volume in the OSD, press and hold MENU for 5 sec.

Press the ▲ or ▼ button, then press the ENTERE button. Select Air, Cable or Air+Cable.

For more information, refer to Channel → Auto Program. (P. 12)

Press the ✎ENTERE button at any time to interrupt the memorization process.

Set the Clock Mode automatically or manually.

If you select the ✎Auto, select the time zone where you live.

The connection method for the best HD screen quality is displayed.

Press the ENTERE button.

Cable

ANT OUT

If You Want to Reset This Feature...

O m

→ Setup → Plug & Play → ENTERE

English

Setup

Plug & Play

Time

Menu Language : English

Caption : Off

Security

General

PIP : Off

Connections

R PB Y

R-AUDIO-L

R PB Y

R-AUDIO-L

R PB Y

W W

BGRRWY

W Y

BGR

R-AUDIO-L

R PB Y

W R

W W

BGRR

Connecting to an AV Device

Using an HDMI / DVI Cable: HD connection (up to 1080p)

We recommend using the HDMI connection for the best quality HD picture. Available devices: DVD, Blu-ray player, HD cable box, HD satellite receiver (STB).

02 Connections

BD/DVD player/

HD cable/sat box

Red White

HDMI OUT

HDMI IN 1(DVI) ✎, 2, 3 / PC/DVI AUDIO IN

For better picture and audio quality, connect to a digital device using an HDMI cable.

An HDMI cable supports digital video and audio signals, and does not require an audio cable.

To connect the TV to a digital device that does not support HDMI output, use an HDMI/DVI and audio cables. –

The picture may not display normally (if at all) or the audio may not work if an external device that uses an older version

of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer of the external device about the HDMI version and, if out of date, request an upgrade.

Be sure to purchase a certiﬁed HDMI cable. Otherwise, the picture may not display or a connection error may occur.

A basic high-speed HDMI cable or one with ethernet is recommended. This product does not support the

ethernet function via HDMI.

Using a Component Cable: (up to 1080p), Using an Audio/Video Cable: (480i only)

Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR

Device

AUDIO OUT

DVI OUT

VCR

When connecting to ✎AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow).

For better picture quality, the

✎

Component connection is recommended over the A/V connection.

VIDEO OUT

AUDIO OUT

COMPONENT OUT

Blu-ray player

Yellow Red White Red Blue Green

English

Connections

R-AUDIO-L

R PB Y

W W

BGRR

Connecting to an Audio Device

Using an Optical (Digital) or Audio (Analog) Cable Connection

Available devices: Digital Audio System, Ampliﬁer, Home Theater

AUDIO IN

DVD

Home Theater

Digital audio system

OPTICAL

Red White

DIGITAL AUDIO OUT (OPTICAL)

✎

When a Digital Audio System is connected to the xDIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume of both the TV and the system.

5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.

When the receiver (home theater) is set to on, you can hear sound output from the TV’s optical jack. When the

TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theater receiver. When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the home theater receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theater.

AUDIO OUT ✎: Connects to the audio input jacks on your amplifier/home theater.

When connecting, use the appropriate connector (sold separately).

When an audio amplifier is connected to the xAUDIO OUT jacks: Decrease the volume of the TV and adjust the volume level with the amplifier’s volume control.

Connecting to a PC

Using an HDMI/DVI Cable / a D-sub Cable

DVI OUT

English

AUDIO OUT

PC OUT

AUDIO OUT

English

02 Connections

Display Modes (D-Sub and HDMI/DVI Input)

Optimal resolution is 1360x768@60Hz.

Mode Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H / V)

IBM

MAC

VESA DMT

VESA CVT

VESA GTF 1280 x 720 52.500 70.000 89.040 - / +

640 x 350 31.469 70.086 25.175 + / -

720 x 400 31.469 70.087 28.322 - / +

640 x 480 35.000 66.667 30.240 - / -

832 x 624 49.726 74.551 57.284 - / -

31.469 59.940 25.175 - / -

640 x 480

800 x 600

1024 x 768

1280 x 720 45.000 60.000 74.250 + / +

1360 x 768 47.712 60.015 85.500 + / +

720 x 576 35.910 59.950 32.750 - / +

1280 x 720 56.456 74.777 95.750 - / +

37.861 72.809 31.500 - / -

37.500 75.000 31.500 - / -

37.879 60.317 40.000 + / +

48.077 72.188 50.000 + / +

46.875 75.000 49.500 + / +

48.363 60.004 65.000 - / -

56.476 70.069 75.000 - / -

60.023 75.029 78.750 + / +

NOTE

✎✎

For HDMI/DVI cable connection, you must use the xHDMI IN 1(DVI) jack. The interlace mode is not supported.

The set might operate abnormally if a non-standard video format is selected.

Separate and Composite modes are supported. SOG(Sync On Green) is not supported.

Input Cables (Sold Separately)

HDMI HDMI-DVI Component Composite (AV) Coaxial (RF) VGA

Connections

Changing the Input source

Source List

O m

ENTER

Use to select TV or an external input sources such as a DVD / Blu-ray player / cable box / STB satellite receiver.

TV / AV1 / AV2 / Component1 / ■ Component2 / PC / HDMI1/DVI / HDMI2 / HDMI3 / USB

→ Input → Source List →

You can only choose external devices that

✎

are connected to the TV. In the Source List, connected inputs will be highlighted.

PC ✎ always stay activated.

Basic Features

How to Navigate Menus

Before using the TV, follow the steps below to learn how to navigate the menu and select and adjust different functions.

1 MENU button: Displays the main on-screen menu. 2 ENTERE / Direction button: Move the cursor and

select an item. Conﬁrm the setting.

3 RETURN button: Returns to the previous menu. 4 EXIT button: Exits the on-screen menu.

Edit Name

O m

VCR / DVD / Cable STB / Satellite STB / PVR STB / ■ AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA:

Name the device connected to the input jacks to make your input source selection easier.

When connecting an HDMI/DVI cable to the ✎HDMI IN

1(DVI) port, you should set to DVI PC or DVI Devices

mode under Edit Name.

How to Operate the OSD (On Screen Display)

The access step may differ depending on the selected menu.

2 3 4 5

→ Input → Edit Name → ENTER

▲ / ▼ Select an icon with the ▲ or ▼

ENTER

▲ / ▼

◄ / ►

ENTER

EXIT

The main menu options appear on the screen:

Picture, Sound, Channel, Setup, Input, Application, Support.

button. Press ENTERE access the

submenu. Select the desired submenu with

the ▲ or ▼ button. Adjust the value of an item with the

◄ or ► button. The adjustment in the OSD may differ depending on the selected menu.

Press ENTERE to conﬁrm the selection.

Press EXIT.

English

Using the INFO button (Now & Next guide)

DTV Air 05.1 ﬁve

POWER

FA V . CH MTS

S.MODE CC

GUIDE

The display identiﬁes the current channel and the status of certain audio-video settings.

The Now & Next guide shows daily TV program information for each channel according to the broadcasting time.

Scroll y ◄, ► to view information for a desired program while watching the current channel.

Globo HD

DTV Air

05.1

TELA QUENTE (HD)

HE-AAC

1080i HD

DESVENTURAS EM SERIE (HD)

Planning your viewing

Guide

O m

→ Channel → Guide → ENTER

The EPG (Electronic program Guide) information is provided by broadcasters. Using program schedules provided by broadcasters, you can specify programs you want to watch in advance so that the channel automatically changes to the selected program channel at the speciﬁed time. Program entries may appear blank or out of date depending on a channel status.

Using Channel View

40 with Dynamite MC

Guide

Channel View - TV

02.1 Discovery



04.1 DiscoveryH&L

05.1 ve

07.1 price-drop.tv

09.1 QVC



11.1 R4DTT

View Mode

The Distillery

Smash Hits! Sunday

DTV Air 05.1 ve

Home and Away 7:00 pm - 7:30 pm

Drama

Dani is devastated when scott makes clear his views on marriage...

7:00 pm - 8:00 pm

American Chopper Tine Team

Programmes resume at 06:00

Home and...

No Information

QVC Selection

No Information

-2 Hours

+2 Hours

1 2 3 4 5 6 7

| 10 | Muiti

)

Family Affairs

Exit

Information

10:06 pm - 12:10 am

8:00 pm - 9:00 pm

Fiv...

Fri, 1 Jan 7:00 pm

EWatch

A Information

Fri, 1 Jan 7:00 pm

)Dark Angel

Page

Watch

Using Scheduled View

Guide

DTV Air 05.1 ve

Family Affairs

7:30 pm - 8:00 pm

Drama

Scheduled View

7:30 pm Today 8:15 pm Today

Tanya confesses all to a stunned Babs. Conrad is anxious to hear...

)

Family Affairs 05.1 ve

)

Dark Angel

A View Mode Information E Cancel

05.1 ve

1 5 7

Red (View Mode): View the list of programs that are

playing now or coming up.

Green (-2 hours): Viewing the list of programs to be

broadcasted before 2 hours.

Yellow (+2 hours): Viewing the list of programs to be

broadcasted after 2 hours.

Blue (Exit): Exit the guide.

Information: Displays details of the selected

program.

(Page): Moves to the previous / next page.

ENTERE button

When selecting the current program, you can – watch the selected program.

When selecting the future program, you can – reserve to watch the selected program. To cancel the schedule, press the ENTERE button again and select Cancel Schedules.

03 Basic Features

Fri, 1 Jan 7:00 pm

English

Basic Features

POWER

FA V . CH MTS

Channel Menu

Seeing Channels ¦

Channel List

O m

Add, delete or set Favorite channels and use the program guide for digital broadcasts.

Select a channel in the All Channels, Added Channels, Favorite or Programmed screen by pressing the ▲ / ▼ buttons, and pressing the ENTERE button. Then you can watch the selected channel.

Added Channels

Air A Antenna B Zoom C Select Page T Tools

■ All Channels: Shows all currently available

■ Added Channels: Shows all added channels.

■ Favorite: Shows all favorite channels.

■ Programmed: Shows all currently reserved

Using the color buttons with the ✎Channel List

x x

number.

Select desired channels and press the Yellow button to set all the selected channels at the same time. The

T x (Tools): Displays the Channel List option menu.

(The Options menus may differ depending on the situation.)

Channel Status Display Icons

Icons Operations

)

(

→ Channel → Channel List → ENTER

02 Air

04.1 ♥ TV #6

05 Air

07 Air 09 Air

11.1 ♥ TV #9

13 Air

14.1 ♥ TV #10

16.1 ♥ TV #11

channels.

programs.

Red (Antenna): Switches to Air or Cable.

Green (Zoom): Enlarges or shrinks a channel

Yellow (Select): Selects multiple channel lists.

mark appears to the left of the selected channels.

(Page): Move to next or previous page.

A channel selected. A channel set as a Favorite. A reserved program. A locked channel. A program currently being broadcast.

Using Favorite Channels ¦

O m

Add to Favorite / Delete from Favorite

Set channels you watch frequently as

Favorites.

1. Select a channel and press the TOOLS

button.

2. Add or delete a channel using the Add to Favorite or Delete from Favorite

menu respectively.

Added Channels

Air A Antenna B Zoom C Select Page T Tools

→ Channel → Channel List → ENTER

02 Air

04.1 ♥ TV #6

05 Air

07 Air 09 Air

11.1 ♥ TV #9

13 Air

14.1 ♥ TV #10

16.1 ♥ TV #11

Delete Add to Favorite Lock Timer Viewing Channel Name Edit Select All

Memorizing channels ¦

O m

Antenna (Air / Cable)

Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system).

→ Channel → ENTER

Auto Program

Air ■ : Air antenna signal. Cable ■ : Cable antenna signal. Air+Cable ■ : Air and Cable antenna.

NOTE ✎

If the antenna is connected to xANT 2 IN (CABLE), select Cable and if it is connected to ANT 1 IN

(AIR), select Air.

If both xANT 1 IN and ANT 2 IN are connected, select Air+Cable.

English

03 Basic Features

How to Stop Auto Programming

1. Press the ENTERE button.

2. A message will ask Stop Auto Program? Select Yes by

pressing the ◄ or ► button.

3. Press the ENTERE button.

Editing channels ¦

O m

Channel Name Edit

1. Select a channel and press the TOOLS button.

2. Edit the channel name using the Channel Name Edit

menu. Channel Name Edit ■ (analog channels only): Assign your

own channel name.

→ Channel → Channel List → ENTER

Other Features ¦

O m

→ Channel → ENTER

Channel List

O m

→ Channel → Channel List → ENTER

Timer Viewing ■ : You can set a desired channel to be displayed automatically at the set time; even when you are watching another channel. Set the current time ﬁrst to use this function. (P. 17)

1. Press the ◄ / ► /▲ / ▼ buttons to select the

desired channel in Channel List.

2. Press the TOOLS button, then select Timer Viewing.

3. Scroll up or down to adjust the settings in the box,

or use the numeric buttons on your remote for entering the date and time.

If you selected ✎Once, Every Week or Every Day in Repeat, you can enter the date you want.

Select OK, then press the ENTERE button when done.

NOTE

✎

Only memorized channels can be reserved.

Reserved programs will be displayed in the

Programmed menu. When a digital channel is selected, press the x►

button to view the digital program.

Select All ■ : Select all the channels in the channel List. Deselect All ■ : Deselect all the selected channels.

You can only select ✎Deselect All when one or more channels are selected.

Channel List Option Menu

Set each channel using the Channel List menu options (Add / Delete, Lock / Unlock, Timer Viewing, Select All / Deselect All). Option menu items may differ depending on the channel

status.

1. Select a channel and press the TOOLS button.

2. Select a function and change its settings. Add / Delete ■ : Delete or add a channel to display the

channels you want.

NOTE

✎

All deleted channels will be shown on the xAll Channels menu.

A gray-colored channel indicates the channel

has been deleted. The xAdd menu only appears for deleted channels. Delete a channel from the xAdded Channels or

Favorite menu in the same manner.

Lock / Unlock ■ : Lock a channel so that the channel

cannot be selected and viewed.

NOTE

✎

This x function is available only when the Child Lock is set to On.

The PIN input screen appears. Enter your

4-digit PIN, the default of which is “0-0-0-0”. Change the PIN using the Change PIN option.

Programmed

(in Channel List) You can view, modify or delete a show you have reserved to

watch.

1. Press the

2. Press the ◄ and ▼ button to move Programmed

menu. Change Info ■ : Change a show you have reserved to

watch. Cancel Schedules ■ : Cancel a show you have reserved

to watch. Information ■ : Display a show you have reserved

to watch. (You can also change the reservation Information.)

Select All / Deselect All: ■ Select or deselect all reserved programs.

ENTERE

button to select Channel List.

Fine Tune

(analog channels only) If the reception is clear, you do not have to ﬁne tune the

channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, ﬁne tune the channel manually.

Select y Fine Tune in the Channel menu. Fine tuned channels that have been saved are marked

✎

with an asterisk “*” on the right-hand side of the channel number in the channel banner.

To reset the fine-tuning, select ✎Reset.

Basic Features

LNA (Off / On)

If the TV is operating in a weak-signal area, the LNA (Low Noise Ampliﬁer) function can improve the reception (a lownoise preampliﬁer boosts the incoming signal).

Color System (Auto / PAL-M / PAL-N / NTSC)

Normally the TV can receive image and sound with good quality in Auto mode. This mode detects the color signal sources automatically. If the color implementation is unsatisfactory, select any of PAL-M, PAL-N or NTSC.

Picture Menu

Changing the Preset Picture Mode ¦

O m

→ Picture → Mode → ENTER

Mode

Select your preferred picture type by pressing the P.MODE button.

Dynamic ■ : Suitable for a bright room. Standard ■ : Suitable for a normal

environment. Movie ■ : Suitable for watching movies in a

dark room.

Economical Solutions ¦

ECO Solution

O m

Energy Saving (Off / Low / Medium / High / ■ Picture Off / Auto)

brightness of the TV in order to reduce power consumption. If you select Picture Off, the screen is turned off , but the sound remains on. Press any button except volume button to turn on the screen.

No Signal Power Off (Off / 15 min / 30 min / 60 min) ■ : To avoid unnecessary energy consumption, set how long you want the TV to remain on if it's not receiving a signal.

→ Picture → ECO Solution → ENTER

Disabled when the PC is in power saving mode.

✎

: This adjust the

Changing the Picture Options ¦

Advanced Settings

O m

ENTER

(available in Standard / Movie mode) Compared to previous models, new Samsung TVs have a

more precise picture.

In PC mode, you can only make changes to ✎Dynamic Contrast, Gamma and White Balance.

→ Picture → Advanced Settings →

Adjusting picture settings ¦

O m

→ Picture → Backlight → ENTER

Backlight / Contrast / Brightness / Sharpness / Color / Tint (G/R)

Your television has several setting options for picture quality control.

NOTE

✎

When you make changes to xBacklight, Contrast, Brightness, Sharpness, Color or Tint (G/R), the OSD will be adjusted accordingly.

In PC mode, you can only make changes to

Backlight, Contrast and Brightness. Settings can be adjusted and stored for each

external device connected to the TV.

English

Advanced Settings

Black Tone : Off ►

Dynamic Contrast : Medium

Shadow Detail : 0

Gamma : 0

RGB Only Mode : Off

Color Space : Native

White Balance

Black Tone (Off / Dark / Darker / Darkest) ■ : Select the black level to adjust the screen depth.

Dynamic Contrast (Off / Low / Medium / High) ■ : Adjust the screen contrast.

Shadow Detail ■ : Increase the brightness of dark images.

Disabled under PC mode.

✎

Gamma ■ : Adjust the primary color intensity. RGB Only Mode (Off / Red / Green / Blue) ■ : Displays

the Red, Green and Blue color for making ﬁne adjustments to the hue and saturation.

Color Space (Auto / Native) ■ : Adjust the range of colors available to create the image.

White Balance ■ : Adjust the color temperature for a more

▼

U Move E Enter R Return

English

03 Basic Features

natural picture. R-Offset / G-Offset / B-Offset: Adjust each color's

(red, green, blue) darkness. R-Gain / G-Gain / B-Gain : Adjust each color's (red,

green, blue) brightness. Reset: Resets the White Balance to it's default

settings.

Flesh Tone ■ : Emphasize pink "flesh tone". Edge Enhancement (Off / On) ■ : Emphasize object

boundaries.

Picture Options

O m

ENTER

In PC mode, you can only make changes to the ✎Color Ton e, Size and Auto Protection Time.

Color Tone : Normal ►

Size : 16:9

Digital Noise Filter : Auto

MPEG Noise Filter : Auto

HDMI Black Level : Normal

Film Mode : Off

Auto Protection Time : 2 hours

Color Tone (Cool / Normal / Warm1 / Warm2) ■

Size ■ : Your cable box/satellite receiver

may have its own set of screen sizes as well. However, we highly recommend you use 16:9 mode most of the time.

16:9: Sets the picture to 16:9 wide mode.

Zoom1: Use for moderate magniﬁcation. Zoom2: Use for a stronger magniﬁcation. Wide Fit: Enlarges the aspect ratio of the picture to ﬁt

the entire screen. 4:3: Sets the picture to basic (4:3) mode.

→ Picture → Picture Options →

Picture Options

U Move E Enter R Return

Warm1 ✎ or Warm2 will be deactivated when the

picture mode is Dynamic. Settings can be adjusted and stored for each

✎

external device connected to an input on the TV.

Do not watch in 4:3 format for a long time, traces

✎

of borders displayed on the left, right and center of the screen may cause image retention(screen burn) which are not covered by the warranty.

Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are input.

NOTE

✎

After selecting xZoom1, Zoom2 or Wide Fit:

1. Press the ► button to select Position.

2. Press the ENTERE button.

3. Press the ▲or ▼button to move the

picture up or down.

4. Press the ENTERE button.

5. Press the ► button to select Reset.

6. Press the ENTERE button.

After selecting Screen Fit in HDMI (1080i / 1080p)

or Component (1080i / 1080p) mode: Adjusts the Position or Size by using ▲, ▼, ◄ or ► button.

HD (High Definition): 16:9 - 1080i/1080p (1920x1080),

720p (1280x720) Settings can be adjusted and stored for each external

device you have connected to an input on the TV.

Input Source Picture Size

ATV, AV, Component (480i, 480p) DTV(1080i), Component (1080i, 1080p), HDMI (720p, 1080i, 1080p) PC 16:9, 4:3

Digital Noise Filter (Off / Low / Medium / High / Auto ■ / Auto Visualization ): If the broadcast signal received by your TV is weak, you can activate the Digital Noise Filter feature to reduce any static and ghosting that may

appear on the screen.

When the signal is weak, try other options until the

✎

best picture is displayed.

Auto Visualization : When changing analog channels, displays signal strength.

Only available for analog channels.

✎

When bar is green, you are receiving the best

✎

possible signal.

MPEG Noise Filter (Off / Low / Medium / High / ■ Auto): Reduces MPEG noise to provide an improved

picture quality.

Disabled under PC mode.

✎

HDMI Black Level (Normal / Low) ■ : Selects the black level on the screen to adjusts the screen depth.

Available only in HDMI mode (RGB signals).

✎

Film Mode (Off / Auto1 / Auto2) ■ : Sets the TV to automatically sense and process ﬁlm signals from all sources and adjusts the picture for optimum quality.

Available in TV, AV, COMPONENT (480i / 1080i)

✎

and HDMI (480i / 1080i).

Auto Protection Time (2 hours / 4 hours / 8 hours ■ / 10 hours / Off): If the screen remains idle with a still

image for a certain period of time deﬁned by the user, the screen saver is activated to prevent the formation of ghost images on the screen.

16:9, Zoom1, Zoom2, 4:3

16:9, 4:3, Wide Fit, Screen Fit

Basic Features

POWER

FA V . CH MTS

S.MODE CC

Picture Reset (OK / Cancel)

Resets your current picture mode to it's default settings.

Setting up the TV with your PC ¦

Set the input source to PC.

Auto Adjustment

O m

ENTER

Adjust frequency values/positions and ﬁne tune the settings automatically.

Not available when connecting through HDMI/DVI

✎

cable.

→Picture → Auto Adjustment →

Screen

Coarse / Fine ■ : Removes or reduces picture noise. If the

noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Finetune again. After the noise has been reduced, readjust the picture so that it is aligned to the center of screen.

Position ■ : Adjust the PC’s screen positioning if it does not ﬁt the TV screen. Press the ▲ or ▼ button to adjust the Vertical-Position. Press the ◄ or ► button to adjust the Horizontal-Position.

Image Reset ■ : Resets the image to default settings.

Using Your TV as a Computer (PC) Display

Setting Up Your PC Software (Based on Windows XP) Depending on the version of Windows and the video card,

the actual screens on your PC will probably look different, but the same basic set-up information will apply in most cases. (If not, contact your computer manufacturer or Samsung Dealer.)

1. Click on “Control Panel” on the Windows start menu.

2. Click on “Appearance and Themes” in the “Control

Panel” window and a display dialog-box will appear.

3. Click on “Display” and a display dialog box will appear.

4. Navigate to the “Settings” tab on the display dialog-box.

The correct size setting (resolution) [Optimum: y 1360 x 768 pixels]

If a vertical-frequency option exists on your display y settings dialog box, the correct value is ‘60’ or ‘60 Hz’. Otherwise, just click ‘OK’ and exit the dialog box.

Sound Menu

Changing the Preset Sound Mode ¦

O m

Mode

Standard ■ : Selects the normal sound mode. Music ■ : Emphasizes music over voices. Movie ■ : Provides the best sound for movies. Clear Voice ■ : Emphasizes voices over other

sounds. Amplify ■ : Increase the intensity of high-frequency sound to

allow a better listening experience for the hearing impaired.

→ Sound → Mode → ENTER

Adjusting sound settings ¦

O m

→ Sound → Equalizer → ENTER

Equalizer

Adjusts the sound mode (standard sound mode only).

Balance L/R ■ : Adjusts the balance between the right and left speaker.

100Hz / 300Hz / 1KHz / 3KHz / 10KHz ■ (Bandwidth Adjustment): Adjusts the level of speciﬁc bandwidth frequencies.

Reset ■ : Resets the equalizer to its default settings.

Sound Settings ¦

O m

→ Sound → ENTER

Virtual Surround (Off / On)

(standard sound mode only) This function provides a virtual 5.1 channel surround sound experience through a pair of speakers or headphones using HRTF (Head Related Transfer Function) technology.

If ✎Speaker Select is set to External Speaker, Virtual

Surround is disabled.

Dialog Clarity (Off / On)

(standard sound mode only) Dialog Clarity emphasizes voice while maintaining the

background sound level.

English

03 Basic Features

Audio Language

(digital channels only) Change the default value for audio languages.

The available language may differ depending on the

✎

broadcast.

Multi-Track Sound (MTS)

(analog channels only)

Mono ■ : Choose for channels that are broadcasting in mono or if you are having difﬁculty receiving a stereo signal.

Stereo ■ : Choose for channels that are broadcasting in stereo.

SAP ■ : Choose to listen to the Separate Audio Program, which is usually a foreign-language translation.

Depending on the particular program being broadcast,

✎

you can listen to Mono, Stereo or SAP.

Auto Volume (Off / Normal / Night)

To equalize the volume level on each channel, set to Normal.

Night ■ : This mode provides an improved sound

experience compared to Normal mode, making almost no noise. It is useful at night.

Speaker Select (External Speaker / TV Speaker)

A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver. In this case, set the TV to External Speaker.

When ✎Speaker Select is set to External Speaker, the volume and MUTE buttons will not operate and the sound settings will be limited.

When ✎Speaker Select is set to External Speaker, you should use these settings.

TV speaker: Off External speaker: On

When ✎Speaker Select is set to TV Speaker, you should use these settings.

TV speaker: On External speaker: On

If there is no video signal, both speakers will be mute.

✎

SPDIF Output

SPDIF (Sony Philips Digital Interface) is used to provide digital sound, reducing interference going to speakers and various digital devices such as an A/V Receiver/Home theater.

Audio Format ■ : During the reception of a digital TV broadcast, you can select the Digital Audio output (SPDIF) format from the options PCM or Dolby Digital.

By connecting to 5.1ch speakers in a dolby

✎

digital setup, maximize your interactive 3D sound experience.

Audio Delay ■ : Correct audio-video sync problems, when watching TV or video, and when listening to digital audio output using an external device such as an AV receiver (0ms ~ 250ms).

FM Transmitter

You can listen to TV sound from FM receiver speaker by transmitting audio signals by FM frequencies.

Connecting a FM Transmitter

Not available in some locations.

✎

You can listen to TV sound from FM receiver speaker by transmitting audio signals by FM frequencies.

For more detailed information, refer to “ ✎FM Transmitter Setup”. (P. 30)

TV Side Panel

FM Transmitter

Insert FM Transmitter Module into the Socket which is located at the side of TV.

FM Transmitter (Off / On): ■ Turns FM transmitter on/off.

FM Frequency: ■ Sets FM transmitter frequency.

Sound Reset (OK / Cancel)

Reset all sound settings to the factory defaults.

Setup Menu

Setting the Time ¦

O m

→ Setup → Time → ENTER

Time

Clock ■ : Setting the clock is for using various timer

features of the TV.

The current time will appear every time you press

the INFO button.

If you disconnect the power cord, you have to set

✎

the clock again.

Clock Mode: Set up the current time manually or automatically.

Auto – : Set the current time automatically using the time from the digital channel.

The antenna must be connected in order to set

✎

the time automatically.

Basic Features

Manual – : Set the current time manually.

Depending on the broadcast station and signal,

✎

the auto time set up may not be correct. In this case, set the time manually.

Clock Set: Set the Day, Month, Year, Hour, Minute and am/pm.

Available only when ✎Clock Mode is set to Manual.

You can set the ✎Day, Month, Year, Hour and Minute directly by pressing the number buttons on the remote control.

Time Zone: Select your time zone.

This function is only available when the ✎Clock

Mode is set to Auto.

Using the Sleep Timer ¦

O m

ENTER

Sleep Timer ■

after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes).

→ Setup → Time → Sleep Timer →

To cancel the ✎Sleep Timer, select Off.

: Automatically shuts off the TV

Setting the On / Off Timer ¦

O m

ENTER

Timer 1 / Timer 2 / Timer 3 ■ : Three different on / off

timer settings can be made. You must set the clock ﬁrst.

On Time

Off Time

Volume Source Antenna Channel

Repeat

On Time / Off Time: Set the hour, minute, am/pm and activate / inactivate. (To activate the timer with the setting you have chosen, set to Activate.)

Volume: Set the desired volume level. Source: Select TV or USB content to be played when

the TV is turned on automatically. (USB can be selected only when a USB device is connected to the TV)

Antenna (when the Source is set to TV): Select Air or Cable.

→ Setup → Time → Timer 1 →

Timer 1

▲

Inactivate 12 00 am

▼

Inactivate 12 00 am

10 TV Air 0

Once

Sun Mon Tue Wed Thu Fri Sat

L Move U Adjust E Enter R Return

Channel (when the Source is set to TV): Select the desired channel.

Contents (when the Source is set to USB): Select a folder in the USB device containing music or photo ﬁles to be played when the TV is turned on automatically.

If there is no music file on the USB device or the

✎

folder containing a music file is not selected, the Timer function does not operate correctly.

When there is only one photo file in the USB, the

✎

Slide Show will not play. If a folder name is too long, the folder cannot be

✎

selected. Each USB you use is assigned its own folder.

✎

When using more than one of the same type of USB, make sure the folders assigned to each USB have different names.

Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at you convenience. If you

select Manual, you can set up the day you want to activate the timer.

The

✎ c

Auto Power Off (available only when the TV is turned

✎

on by the Timer): The TV will be automatically turned off after 3 hours of being left idle to prevent overheating.

mark indicates the day is selected.

Locking Programs ¦

O m

→ Setup → Security → ENTER

Security

The PIN input screen appears before the setup screen. ✎ Enter your 4-digit PIN, the default of which is 0-0-0-0. ✎

Change the PIN using the Change PIN option. Child Lock (Off / On) ■ : Lock channels in Channel List,

to prevent unauthorized users, such as children, from watching unsuitable program.

Parental Lock ■ : Prevent unauthorized users, such as children, from watching unsuitable program with a userdeﬁned 4-digit PIN code.

Allow All: Unlock all TV ratings.

Change PIN ■ : The Change PIN screen will appear. Choose any 4 digits for your PIN and enter them. As soon as the 4 digits are entered, the Conﬁrm New PIN screen appears. Re-enter the same 4 digits. When the Conﬁrm screen disappears, your PIN has been memorized.

If you forget the PIN, press the remote-control

✎

buttons in the following sequence, which resets the pin to “0-0-0-0” : POWER (off) → MUTE → 8 → 2 → 4 → POWER (on).

English

03 Basic Features

Other Features ¦

O m

→ Setup → ENTER

Menu Language

Set the menu language.

1. Select Menu Language and press the ENTERE button.

2. Choose desired language and press the ENTERE

button.

Caption

(On-Screen Text Messages)

Caption (Off / On) ■ : You can switch the caption function on or off. If captions are not available, they will not be displayed on the screen.

The Caption feature does not work

✎

in Component, HDMI or PC modes.

Caption Mode ■ : You can select the desired caption mode.

The availability of captions depends on the

✎

program being broadcasted.

CC1~CC4 / Text1~Text4: (analog channels only) The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device to the TV. (Depending on the broadcasting signal, the Analog Caption function may or may not work with digital channels.)

General

Game Mode (Off / On) ■ : When connecting to a game

console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by selecting the game menu.

NOTE

✎

Precautions and limitations for game mode

To disconnect the game console and connect – another external device, set Game Mode to Off in the setup menu.

If you display the TV menu in – Game Mode, the screen shakes slightly.

Game Mode xis not available when the input source

is set to TV or PC. After connecting the game console, set xGame Mode

to On. Unfortunately, you may notice reduced picture qualit y.

If xGame Mode is On:

Picture – mode is set to Standard and Sound mode is set to Movie.

Equalizer – is not available.

Menu Transparency (Bright / Dark) ■ : Set the

Transparency of the menu. Melody (Off / Low / Medium / High) ■ : Set so that a

melody plays when the TV is turned on or off.

NOTE

✎

Only available when the Input source is set to TV.

To turn the melody off, set Melody to Off. The Melody does not play.

When no sound is output from the TV because the –

MUTE button has been pressed.

When no sound is output from the TV because the – volume has been reduced to minimum with the

VOL – button.

When the TV is turned off by – Sleep Timer function.

AV Color System ( Auto / PAL-M / PAL-N / NTSC ) ■

Normally the TV can receive image and sound with good quality when in the mode Auto. This mode detects the signal color system automatically. In case of some signal reception with color unsatisfactory, select the AV Color System Mode to PAL-M, PAL-N or NTSC.

This function is available only in AV mode.

✎

Picture In Picture (PIP) ¦

PIP

O m

You can watch the TV tuner and one external video source simultaneously. PIP (Picture-in-Picture) does not function in

the same mode.

NOTE

✎

PIP (Off / On) ■ : Activate or deactivate the PIP function. Air/Cable (Air / Cable) ■ : Select either Air or Cable as the

input source for the sub-screen.

Channel ■ : Select the channel for the sub-screen. Size ( ■ Position ( ■

sub-picture. Sound Select (Main / Sub) ■ : You can choose the

desired sound (Main or Sub) in PIP mode.

→ Setup → PIP → ENTER

If you turn the TV off while watching in PIP mode, the PIP window will disappear.

You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke.

PIP Settings

Main picture Sub picture Component1,

Component2, HDMI1/DVI, HDMI2, HDMI3, PC

/ Ã): Select a size for the sub-picture.

/ – / — / œ): Select a position for the

Basic Features

Support Menu

O m

→ Support → ENTER

Self Diagnosis

Picture Test ■ : Use to check for picture problems. If the

problem continues to occur, check the color pattern. Yes: If the test pattern does not appear or there is

noise in the test pattern, select Yes. There may be a problem with the TV. Contact Samsung’s Call Center for assistance.

No: If the test pattern is properly displayed, select No. There may be a problem with your external equipment. Please check your connections. If the problem persists, refer to the external device’s user manual.

Sound Test ■ : Use the built-in melody sound to check for sound problems.

If you hear no sound from the TV’s speakers,

✎

before performing the sound test, make sure

Speaker Select is set to TV speaker in the Sound menu.

The melody will be heard during the test even if

✎

Speaker Select is set to External Speaker or the sound is muted by pressing the MUTE button.

Yes: If you can hear sound only from one speaker or not at all during the sound test, select Yes. There may be a problem with the TV. Contact Samsung’s Call Center for assistance.

No: If you can hear sound from the speakers, select No. There may be a problem with your external equipment. Please check your connections. If the problem persists, refer to the external device’s user manual.

Signal Information ■ : (digital channels only) An HD channel’s reception quality is either perfect or the channels are unavailable. Adjust your antenna to increase signal strength.

Troubleshooting ■ : If the TV seems to have a problem, refer to this description.

If none of these troubleshooting tips apply, contact

✎

the Samsung customer service center.

Software Upgrade

Software Upgrade can be performed by downloading the latest ﬁrmware from samsung.com to a USB memory device.

Current Version - the software already installed in the TV.

Software is represented as ‘Year/Month/Day_Version’.

✎

Software Upgrade

Current Version 2010/11/29_000334

By USB ►

Alternative Software

U Move E Enter R Return

Installing the Latest Version

By USB ■ : Insert a USB drive

containing the ﬁrmware upgrade ﬁle, downloaded from www.samsung.com, into the TV. Please be careful not to disconnect the power or remove the USB drive until upgrades are complete. The TV will be turned off and on automatically after completing the ﬁrmware upgrade. When software is upgraded, video and audio settings you have made will return to their default settings. We advise you to write down your settings so that you can easily reset them after the upgrade.

Alternative Software ■ (Not available)

TV Side Panel

USB Drive

HD Connection Guide

Refer to this information when connecting external devices to the TV.

Contact Samsung

View this information when your TV does not work properly or when you want to upgrade the software. You can ﬁnd information regarding our call centers and how to download products and software.

English

SUM

Advanced Features

Media Play

04 Advanced Features

Enjoy photos, music and/or movie ﬁles saved on a USB Mass Storage Class (MSC) device.

O m

→ ENTER

→ Application → Media Play

MediaPlay

Videos

Change Device

View Devices E Enter R Return

Connecting a USB Device ¦

1. Turn on your TV.

2. Connect a USB device containing photo, music and/or movie ﬁles to the USB jack on

the side of the TV.

3. When USB is connected to the TV, popup window appears. Then you can select Media Play.

It might not work properly with unlicensed multimedia files.

✎

Need-to-Know List before using ✎Media Play

MTP (Media Transfer Protocol) is not supported.

The file system supports FAT16, FAT32 and NTFS.

Certain types of USB Digital camera and audio devices may not be compatible with this TV.

Media Play only supports USB Mass Storage Class (MSC) devices. MSC is a Mass Storage Class Bulk-Only

Transport device. Examples of MSC are Thumb drives, Flash Card Readers (USB HUB are not supported). Devices should be connected directly to the TV’s USB port.

Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data.

SAMSUNG is not responsible for any data file damage or data loss. Do not disconnect the USB device while it is loading.

The higher the resolution of the image, the longer it takes to display on the screen.

The maximum supported JPEG resolution is 15360X8640 pixels.

For unsupported or corrupted files, the “Not Supported File Format” message is displayed.

If the files are sorted by Basic View, up to 1000 files can be displayed in each folder.

MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management

(DRM) is a technology that supports the creation, distribution and management of the content in an integrated and comprehensive way, including the protection of the rights and interests of the content providers, the prevention of the illegal copying of contents, as well as managing billings and settlements.

If more than 2 PTP devices are connected, you can only use one at a time.

If more than two MSC devices are connected, some of them may not be recognized. A USB device that requires high

power (more than 500mA or 5V) may not be supported. If an over-power warning message is displayed while you are connecting or using a USB device, the device may not

be recognized or may malfunction. If the TV has been no input during time set in xAuto Protection Time, the Screensaver will run. If a USB HDD supports the energy saving mode, the energy saving mode may be automatically off.

If a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read.

If a USB device connected to the TV is not recognized, the list of files on the device is corrupted or a file in the list is

not played, connect the USB device to the PC, format the device and check the connection. If a file deleted from the PC is still found when Media Play is run, use the “Empty the Recycle Bin” function on the PC

to permanently delete the file.

USB Drive

TV Side Panel

English

Advanced Features

Jan.10.2010

/Movie 01.avi 1/1

Movie 01.avi

SUM

Movie 03.avi

Movie 05.avi

Movie 07.avi

Movie 09.avi

Movie 02.avi

Movie 04.avi

Movie 06.avi

Movie 08.avi

Movie 10.avi

Movie 01.avi

00:04:03 / 00:07:38 1/1

SUM

Screen Display ¦

Move to the desired ﬁle using the up/down/right/left buttons and then press the ENTERE or  (Play) button. The ﬁle is played.

Supports the ✎View Devices and Contents Mode in Media Play homepage.

You can ascertain the selected

ﬁle name and the number of

Displays the sorting standard.

The sorting standard is

✎

different depending on the contents.

Information:

ﬁles and page.

Sort List Section:

Videos

Page

File List Section: You can conﬁrm the ﬁles and groups that are sorted by category.

Change Device

Select Sorting T Tools

Operation Buttons

Red (Change Device): Selects a connected device. Green (Preference): Sets the ﬁle preference. (not supported in Basic view) Yellow (Select): Selects multiple ﬁles from ﬁle list. Selected ﬁles are marked with a symbol. Blue (Sorting): Selects the sort list.

Tools: Displays the option menu.

Using the ✎

or µ button, ﬁle list can move to next or previous page.

Videos

Playing Video

1. Press the ◄ or ► button to select Videos, then press the ENTERE button in the Media Play menu.

2. Press the ◄/►/▲/▼ button to select the desired video in the ﬁle list.

3. Press the ENTERE button or  (Play) button.

The selected ﬁle is displayed on the top with its playing time. – If video time information is unknown, play time and progress bar are not displayed. – During video playback, you can search using – ◄ and ► button.

In this mode, you can enjoy movie clips contained on a Game,

✎

but you cannot play the Game itself. Supported Subtitle Formats y

Name File extension Format

MPEG-4 time-based text .ttxt XML

SAMI .smi HTML

SubRip .srt string-based SubViewer .sub string-based Micro DVD .sub or .txt string-based

Pause

Jump T Tools R Return

English

04 Advanced Features

Supported Video Formats y

File Extention Container Video Codec Resolution

Divx 3.11 / 4.x / 5.1 / 6.0 1920x1080 6 ~ 30 8

*.avi

*.mkv

*.asf ASF

*.wmv ASF Window Media Video v9 1920x1080 6 ~ 30 25 WMA

*.mp4 MP4

*.3gp 3GPP

*.vro

*.mpg

*.mpeg

*.ts *.tp

*.trp

AVI

MKV

VRO VOB

XviD 1920x1080 6 ~ 30 8

H.264 BP / MP / HP 1920x1080 6 ~ 30 25

MPEG4 SP / ASP 1920x1080 6 ~ 30 8

Divx 3.11 / 4.x / 5.1 / 6.0 1920x1080 6 ~ 30 8

XviD 1920x1080 6 ~ 30 8

H.264 BP / MP / HP 1920x1080 6 ~ 30 25

MPEG4 SP / ASP 1920x1080 6 ~ 30 8

H.264 BP / MP / HP 1920x1080 6 ~ 30 25

MPEG4 SP / ASP 1920x1080 6 ~ 30 8

XVID 1920x1080 6 ~ 30 8

H.264 BP / MP / HP 1920x1080 6 ~ 30 25

MPEG4 SP / ASP 1920x1080 6 ~ 30 8

MPEG1 1920x1080 24 / 25 / 30 30 MPEG2 1920x1080 24 / 25 / 30 30 MPEG1 1920x1080 24 / 25 / 30 30

H.264 1920x1080 6 ~ 30 25

MPEG2 1920x1080 24 / 25 / 30 30

H.264 1920x1080 6 ~ 30 25

VC1 1920x1080 6 ~ 30 25

Frame rate

(fps)

Bit rate (Mbps)

Audio Codec

MP3 / AC3 / LPCM /

ADPCM / DTS Core

MP3 / AC3 / LPCM /

ADPCM / WMA

MP3 / ADPCM / AAC

ADPCM / AAC / HE-AAC

AC3 / MPEG / LPCM

AC3 / MPEG / LPCM / AACMPEG2 1920x1080 24 / 25 / 30 30

AC3 / AAC / MP3 / DD+

Other Restrictions

NOTE

✎

If there are problems with the contents of a codec, the codec will not be supported.

If the information for a Container is incorrect and the file is in error, the Container will not be able to play

correctly. Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/sec

listed in the table above.

HE-AAC

Supports up to H.264, Level 4.1• H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are • not supported. H.263 is not supported.• GMC 2 is not support. •

Video Decoder Audio Decoder

Supports up to WMA 7, 8, 9, STD• WMA 9 PRO does not support 2 channel excess multi • channel or lossless audio. WMA sampling rate 22050Hz mono is not supported.•

Advanced Features

Movie 01.avi

00:04:03 / 00:07:38 1/1

SUM

3/15

I Love you

Jhon

Music 1

No Singer

Music 2

No Singer

Music 3

No Singer

Music 4

No Singer

Music 5

No Singer

I Love You

Jhon

1st Album Pop 2010

4.2MB

01:10 / 04:02

SUM

Image1024.jpg 1024x768 2010/2/1 3/15

SUM

Playing movie continuously (Resume Play)

If you exit the playing movie function, the movie can be played later from the point where it was stopped.

1. Select the movie ﬁle you want to play continuously by pressing

the ◄ or ► button to select it from the ﬁle list section.

2. Press the  (Play) / ENTERE button.

3. Select Play Continuously (Resume Play) by pressing the Blue

button. The Movie will begin to play from where it was stopped.

The Blue button is available when resuming play.

✎

If the ✎Continuous Movie Play Help function is set to On in the Settings menu, a pop-up message will appear when you resume play a movie file.

Music

Playing Music

1. Press the ◄ or ► button to select Music, then press the

ENTERE button in the Media Play menu.

2. Press the ◄/►/▲/▼ button to select the desired Music in the

ﬁle list.

3. Press the ENTERE button or  (Play) button.

During music playback, you can Search using – ◄ and ►

button.

–  (REW) and µ (FF) buttons do not function during play.

Only displays the files with MP3 and PCM file extension. Other

✎

file extensions are not displayed, even if they are saved on the same USB device.

If the sound is abnormal when playing MP3 files, adjust the

✎

Equalizer in the Sound menu. (An over-modulated MP3 file may cause a sound problem.)

Play continuously

Resumes playing from the last viewed scene.

Play continuously E Pause

Jump T Tools R Return

Playlist

Pause L Jump T Tools R Return

Photos

Viewing a Photo (or Slide Show)

1. Press the ◄ or ► button to select Photos, then press the

ENTERE button in the Media Play menu.

2. Press the ◄/►/▲/▼ button to select the desired photo in the

ﬁle list.

3. Press the ENTERE button or  (Play) button.

While a photo list is displayed, press the –

ENTERE button on the remote control to start the slide

show. All ﬁles in the ﬁle list section will be displayed in the slide show. – During the slide show, ﬁles are displayed in order. –

Music files can be automatically played during the Slide Show if

✎

the Background Music is set to On. The ✎BGM Mode cannot be changed until the BGM has finished

English



(Play) /

Normal

Pause L Previous/Next T Tools R Return

+ 53 hidden pages