Samsung LN32C540F2D, LN32C450E1D, LN32C540F2F, LN32C550J1F, LN37C530F1F F/W Upgrade Guide
...
2010 Samsung TV
F/W Upgrade Guide
Samsung Electronics
Model List
LCD TV
4 series :
LN26C450E1D, LN32C450E1D, LN32C450E1V
5 series :
LN32C530F1F, LN32C540F2D, LN32C540F2F, LN32C550J1F,
LN37C530F1F, LN37C550J1F, LN40C530F1F, LN40C540F2F,
LN40C550J1F, LN46C530F1F, LN46C540F2F, LN46C550J1F,
LN52C530F1F
LED TV
4000 series :
UN19C4000PD, UN22C4000PD, UN22C4010PD, UN26C4000PD,
UN32C4000PD
5000 series :
UN32C5000QF, UN32C5100QF, UN37C5000QF,UN37C5100QF,
UN40C5000QF, UN40C5100QF, UN46C5000QF
Step1. How to prepare the USB Memory Drive
2. Connect the USB Memory Drive
to the USB port of your PC.
Copy the file onto the USB Memory Drive.
3. Go to the USB Memory Drive and then double click the file.
1. Save the firmware file onto your computer.
File Name : T-TDT5AUSC and T-MSX5AUSC.exe
4. Click on the “Unzip” button. 5. Unzipping is in progress.
6. After completing, click on the
“OK” and “Close” buttons.
7. A folder containing the firmware files
has been added to the USB memory drive.
Folder name : T-TDT5AUSC and
T-MSX5AUSC
8. Safely disconnect the USB memory drive
by right clicking the green check mark
on the taskbar and then left click
“Safely Remove”.
OK
[Step 1] Turn the TV on
[Step 2] Insert the USB Memory Drive
containing the Software into the USB port
on the side (or rear) of the TV
Step2. How to upgrade the firmware
[Step 3] Press the MENU button to display
the menu. Press the ▲ or ▼ button
to select “Support”, then press the
ENTER button
[Step 4] Press the ▲ or ▼ button to select
“Software Upgrade”, then press the
ENTER button
[Step 5] The message “Scanning for USB.
It may take up to 30 seconds”
is displayed.
[Step 6] Then, the message “Upgrade
Version XXXX to version XXXX?
The system will be reset after
upgrade.” is displayed.
Select “Yes”, then press the ENTER
button.
And then software is upgraded
automatically.
[Step 7] When the Software upgrade
is complete; the TV will turn off and
then back on by itself.
Loading...