How it Works
Samsung
Loading...
LN32C400
User Manual
67 pgs15.6 Mb0

Samsung LN32C400 User Manual

Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Contate a SAMSUNG EM TODO O MUNDO
Caso tenha dúvidas ou comentários sobre os produtos da Samsung, entre em contato com o centro de atendimento ao cliente da SAMSUNG.
Country
BRAZIL
Customer Care Center
0800-124-421 4004-0000
www.samsung.com
Web Site
LCD TV
user manual
BN68-03160B-00
imagine the possibilities
Thank you for purchasing this Samsung product. To receive more complete service, please register your product at
www.samsung.com/register
Model Serial No.
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice.
Important Warranty Information Regarding Television Format Viewing
See the warranty card for more information on warranty terms.
✎
Wide screen format LCD Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full­motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark sidebars on nonexpanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week. Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven aging of LCD Displays that leave subtle, but permanent burned-in ghost images in the LCD picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On LCD models that offer picture sizing features, use these controls to view different formats as a full screen picture. Be careful in the selection and duration of television formats used for viewing. Uneven LCD aging as a result of format selection and use, as well as burned-in images, are not covered by your Samsung limited warranty.
Still image warning
Avoid displaying still images (like jpeg picture files) or still image element (like TV Program logo, panorama or 4:3 image format, stock or news bar at screen bottom etc.) on the screen. Constant displaying of still picture can cause ghosting of LCD screen, which will affect image quality. To reduce risk of this effect, please follow below recommendations:
Avoid displaying the same TV channel for long periods.• Always try do display any image on full screen, use TV set picture format menu for best possible match.• Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout •
process. Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.•
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation. Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
When using a stand or wall-mount, use parts provided by Samsung Electronics only.
✎
If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
x
The appearance may differ depending on the product.
✎
Installation with a stand. Installation with a wall-mount.
4inches
4inches
4inches
© 2010 Samsung Electronics Co., Ltd. All rights reserved.
English
2
4inches
4inches
4inches
4inches
3
Contents
English
ENGLISH
P
POWER
Getting Started
List of Features y ......................................................... 4
Accessories y .............................................................. 4
Viewing the Control Panel y ......................................... 4
Viewing the Remote Control y ...................................... 5
Connecting to an Antenna y ........................................ 6
Plug & Play (Initial Setup) y ........................................... 6
Connections
Connecting to an AV Device y ......................................7
Connecting to an Audio Device y .................................8
Connecting to a PC y ..................................................8
Changing the Input source y ...................................... 10
Basic Features
How to Navigate Menus y .......................................... 10
Using the INFO button (Now & Next guide) y .............11
Planning your viewing y ............................................. 11
Channel Menu y ........................................................ 12
Seeing Channels 12 Using Favorite Channels 12 Memorizing channels 12 Editing channels 13 Other Features 13
Picture Menu y .......................................................... 14
Changing the Preset Picture Mode 14 Adjusting picture settings 14 Economical Solutions 14 Changing the Picture Options 14 Setting up the TV with your PC 16
Sound Menu y ........................................................... 16
Changing the Preset Sound Mode 16 Adjusting sound settings 16 Sound Settings 16
Setup Menu y ............................................................ 17
Setting the Time 17 Using the Sleep Timer 18 Setting the On/Off Timer 18 Locking Programs 18 Other Features 19 Picture In Picture (PIP) 19
Support Menu y ......................................................... 20
Advanced Features
Media Play y .............................................................. 21
Connecting a USB Device 21 Screen Display 22 Playing Multiple Files 25 Media Play - Additional Functions 25
Other Information
Installing the Wall Mount y ......................................... 27
Securing the TV to the Wall y ..................................... 28
Anti-theft Kensington Lock y ...................................... 28
Troubleshooting y ......................................................29
Specifications y ......................................................... 32
License 32
Index y ...................................................................... 33
Check the Symbol!
t
This function can be used by pressing the
TOOLS button on the remote control.
✎
Note:
Important information
O
Step by step guide:
Informs you how to access
the menu.
Getting Started
Getting Started
List of Features
Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed y without a cable box / STB (Set-Top-Box) satellite receiver.
Media Play y : Allows you to play some music files, pictures, and movies saved on a USB device. (P. 21) Self Diagnosis y : You can check whether picture or sound normally operatates. (P. 20)
Accessories
Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.
✎
The items' colors and shapes may vary depending on the models.
✎
Remote Control & Batteries (AAA x 2) (Not available in some locations) y Owner’s Instructions y Warranty Card / Safety Guide (Not available in some locations) y
(M4 X L16)
Screws (3EA) y
For more detailed information, please refer to stand guide.
✎
Viewing the Control Panel
The product color and shape may vary depending on the model.
✎
Cleaning Cloth y Power Cord y
Power IndicatorRemote control sensor
Speakers
P
(Power)
Remote control sensor Aim the remote control towards this spot on the TV.
SOURCE
MENU Displays an on-screen menu, the OSD (on screen display), of your TV’s features.
y
z
Power Indicator Blinks and turns off when the power is on and lights up in standby mode.
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.
4
E
English
Turns the TV on or off.
Toggles between all the available input sources. In the on-screen menu, use this button as you would use the ENTERE button on the remote control.
Adjusts the volume. In the OSD, use the ◄ and ► buttons on the remote control.
Changes the channels. In the OSD, use the ▼ and ▲ buttons on the remote control.
y
z
buttons as you would use the
buttons as you would use the
5
01 Getting Started
English
Viewing the Remote Control
FAV.CH
CC
Turn the TV on and off.
Have direct access to channels.
Press to select additional channels (digital)
being broadcast by the same station. For
example, to select channel ‘54.3’, press
‘54’, then press ‘-’ and ‘3’.
Adjust the volume.
Displays channel list on the screen. (P. 12)
Views Media Play. (P. 21)
Quickly select frequently used functions.
Selects the on-screen menu items and changes the values seen on the menu.
Returns to the previous menu.
Buttons in Channel List, Media Play
menu, etc.
Displays and selects the available video sources. (P. 10)
Returns to the previous channel.
Cuts off the sound temporarily.
Changes channels.
Display the main on-screen menu. Display the EPG (Electronic Program Guide).
(P. 11)
Press to display information on the TV screen. (P.11)
Exits the menu.
FAV.CH: Display Favorite Channel Lists on the
screen. (P. 12)
P.SIZE: Choose the picture size. (P. 15) CC: Controls the caption decoder. (P. 19)
Installing batteries (Battery size: AAA)
NOTE
✎
Use the remote control within 23 feet from the TV.
x
Bright light may affect the performance of the remote
x
control. Avoid using nearby special fluorescent light or neon signs.
The color and shape may vary depending on the model.
x
Getting Started
P
POWER
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
Preset: Connecting the mains and antenna.
✎
VHF/UHF Antenna
or
Power input
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERP button. Plug & Play is available only when the Input source is set to TV.
To return previous step, press the red button.
✎
Selecting a language
1
Selecting Store Demo
2
or Home Use
Selecting an antenna
Press the ▲ or ▼ button, then press the ENTERE button. Select the desired OSD (On Screen Display) language.
Press the ◄ or ► button, then press the ENTERE button.
Select the y Home Use mode. Store Demo Mode is for retail environments.
Return the unit’s settings from y Store Demo to Home Use (standard): Press the volume button on the TV. When you see the volume in the OSD, press and hold MENU for 5 sec.
Press the ▲ or ▼ button, then press the ENTERE button. Select Air, Cable or Air+Cable.
Cable
ANT OUT
3
Selecting a channel The channel search will start automatically.
4
Setting the Clock
5
Mode
Viewing the HD
6
Connection Guide.
Enjoy your TV.
For more information, refer to Channel → Auto Program. (P. 12)
Press the ✎ENTERE button at any time to interrupt the memorization process.
Set the Clock Mode automatically or manually.
If you select the ✎Auto, select the time zone which you live.
The connection method for the best HD screen quality is displayed.
Press the
ENTERE
button.
7
If You Want to Reset This Feature...
MENU
O m
6
→ Setup → Plug & Play → ENTERE.
English
Setup
Plug & Play
Time
Menu Language : English
Caption : Off
Security
General
PIP : Off
Connections
P
R PB Y
R-AUDIO-L
P
R PB Y
COMPONENT IN / AV IN
WY
W Y
BGR
W
W
B
G
R
R
R
R
R
R-AUDIO-L
P
R PB Y
W W
BGRRWY
R-AUDIO-L
P
R PB Y
W W
BGRR
Connecting to an AV Device
Using an HDMI / DVI Cable: HD connection (up to 1080p)
We recommend using the HDMI connection for the best quality HD picture. Available devices: DVD, Blu-ray player, HD cable box, HD satellite receiver (STB).
02 Connections
BD/DVD player/
HD cable/sat box
Red White
HDMI OUT
HDMI (DVI) IN ✎/ PC/DVI AUDIO IN
For better picture and audio quality, connect to a digital device using an HDMI cable.
x
An HDMI cable supports digital video and audio signals, and does not require an audio cable.
x
To connect the TV to a digital device that does not support HDMI output, use an HDMI/DVI and audio cables. –
The picture may not display normally (if at all) or the audio may not work if an external device that uses an older version
x
of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer of the external device about the HDMI version and, if out of date, request an upgrade.
Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may occur.
x
A basic high-speed HDMI cable or one with ethernet is recommended. This product does not support the ethernet
x
function via HDMI.
Using a Component Cable: (up to 1080p), Using an Audio / Video Cable: (480i only)
Available devices: VCR, DVD, Blu-ray player, cable box, STB satellite receiver
Device
AUDIO OUT
DVI OUT
VCR
VIDEO OUT
AUDIO OUT
When connecting to ✎AV IN , the color of the AV IN [Y/ VIDEO] jack (Green) does not match the color of the video cable (Yellow).
For better picture quality, the Component
✎
connection is recommended over the A/V connection.
AUDIO OUT
COMPONENT OUT
Blu-ray player
Yellow Red White Red Blue Green
English
7
Connections
/
VIDEO
/
VIDEO
W W
BGRR
R-AUDIO-L
P
R PB Y
Connecting to an Audio Device
Using an Optical (Digital) or Audio (Analog) Cable Connection
Available devices: digital audio system, amplifier, home theater
Red White
DIGITAL AUDIO OUT (OPTICAL)
✎
When a digital audio system is connected to the xDIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume of both the TV and the system.
5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.
x
When the receiver (home theater) is set to on, you can hear sound output from the TV’s optical jack. When the TV is receiving
x
a DTV signal, the TV will send 5.1 CH sound to the home theater receiver. When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the home theater receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theater.
AUDIO OUT ✎: Connects to the audio input jacks on your amplifier/home theater.
When connecting, use the appropriate connector (sold separately).
x
When an audio amplifier is connected to the xAUDIO OUT jacks: Decrease the volume of the TV and adjust the volume level with the amplifier’s volume control.
AUDIO IN
OPTICAL
DVD
Home Theater
Digital Audio
System
Using an HDMI/DVI Cable / a D-sub Cable
DVI OUT
English
8
Connecting to a PC
AUDIO OUT
PC OUT
AUDIO OUT
9
English
02 Connections
Display Modes (D-Sub and HDMI/DVI Input)
Optimal resolution is 1360x768@60Hz.
Mode Resolution
IBM
MAC
VESA DMT
VESA CVT
VESA GTF 1280 x 720 52.500 70.000 89.040 - / +
NOTE
✎✎
640 x 350 31.469 70.086 25.175 + / ­720 x 400 31.469 70.087 28.322 - / + 640 x 480 35.000 66.667 30.240 - / ­832 x 624 49.726 74.551 57.284 - / -
640 x 480
800 x 600
1024 x 768
1280 x 720 45.000 60.000 74.250 + / + 1360 x 768 47.712 60.015 85.500 + / +
720 x 576 35.910 59.950 32.750 - / +
1280 x 720 56.456 74.777 95.750 - / +
Horizontal Frequency
(KHz)
31.469 59.940 25.175 - / -
37.861 72.809 31.500 - / -
37.500 75.000 31.500 - / -
37.879 60.317 40.000 + / +
48.077 72.188 50.000 + / +
46.875 75.000 49.500 + / +
48.363 60.004 65.000 - / -
56.476 70.069 75.000 - / -
60.023 75.029 78.750 + / +
Vertical Frequency
(Hz)
Pixel Clock Frequency
(MHz)
For HDMI/DVI cable connection, you must use the xHDMI (DVI) IN jack. The interlace mode is not supported.
x
The set might operate abnormally if a non-standard video format is selected.
x
Separate and Composite modes are supported. SOG (Sync On Green) is not supported.
x
Input Cables (Sold Separately)
Sync Polarity
(H/V)
HDMI HDMI-DVI Component Composite (AV) Coaxial (RF) VGA
Connections
Changing the Input source
Source List
MENU
O m
Use to select TV or an external input sources such as a DVD / Blu-ray player / cable box / STB satellite receiver.
TV / AV / Component / PC / HDMI/ ■ DVI / USB
→ Input → Source List → ENTER
You can only choose external
✎
devices that are connected to the TV. In the Source List, connected inputs will be highlighted.
PC ✎ always stay activated.
E
Basic Features
How to Navigate Menus
Before using the TV, follow the steps below to learn how to navigate the menu and select and adjust different functions.
1
2
3
1 MENU button: Displays the main on-screen menu. 2 ENTERE / Direction button: Move the cursor and
select an item. Confirm the setting.
3 RETURN button: Returns to the previous menu. 4 EXIT button: Exits the on-screen menu.
4
Edit Name
MENU
O m
VCR / DVD / Cable STB / Satellite STB / PVR STB / ■ AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA:
Name the device connected to the input jacks to make your input source selection easier.
When connecting an HDMI/DVI cable to the ✎HDMI
(DVI) IN port, you should set to DVI PC or DVI Devices
mode under Edit Name.
How to Operate the OSD (On Screen Display)
The access step may differ depending on the selected menu.
1
2 3 4 5
6
→ Input → Edit Name → ENTER
MENU
▲ / ▼ Select an icon with the ▲ or ▼
ENTER
▲ / ▼
◄ / ►
ENTER
EXIT
The main menu options appears on
m
the screen:
Picture, Sound, Channel, Setup, Input, Application, Support.
button.
E
Press ENTERE to access the sub-menu.
Select the desired submenu with the ▲ or ▼ button.
Adjust the value of an item with the ◄ or ► button. The adjustment in the OSD may differ depending on the selected menu.
E
Press ENTERE to complete the configuration.
Press EXIT.
e
E
7
10
English
Using the INFO button (Now & Next guide)
P
POWER
FA V . CH MTS
S.MODE CC
GUIDE
DTV Air 05.1 five
800 five
The display identifies the current channel and the status of certain audio-video settings.
The Now & Next guide shows daily TV program information for each channel according to the broadcasting time.
Scroll y ◄, ► to view information for a desired program while watching the current channel.
Globo HD
DTV Air
05.1
TELA QUENTE (HD)
HE-AAC
1080i HD
DESVENTURAS EM SERIE (HD)
| 10 | Muiti
10:06 pm - 12:10 am
Fri, 1 Jan 7:00 pm
EWatch
A Information
Using Scheduled View
Guide
DTV Air
05.1
Family Affairs
7:30 pm - 8:00 pm
Drama
Scheduled View
7:30 pm Today 8:15 pm Today
Tanya confesses all to a stunned Babs. Conrad is anxious to hear...
)Family Affairs 05.1 ve
03 Basic Features
Fri, 1 Jan 7:00 pm
ve
05.1 ve )Dark Angel
A View Mode Information E Cancel
Planning your viewing
Guide
MENU
O m
The EPG (Electronic Program Guide) information is provided by broadcasters. Using program schedules provided by broadcasters, you can specify programs you want to watch in advance so that the channel automatically changes to the selected program channel at the specified time. Program entries may appear blank or out of date depending on a channel status.
Using Channel View
Guide
Channel View - TV
02.1 Discovery
04.1 DiscoveryH&L
05.1 ve
07.1 price-drop.tv
09.1 QVC
11.1 R4DTT
A
View Mode
→ Channel → Guide → ENTER
40 with Dynamite MC
The Distillery
Smash Hits! Sunday
DTV Air 05.1 ve
Home and Away 7:00 pm - 7:30 pm
Drama
Dani is devastated when scott makes clear his views on marriage...
7:00 pm - 8:00 pm
American Chopper Tine Team
Programmes resume at 06:00
Home and... )Family Affairs
No Information
QVC Selection
No Information
B
-2 Hours
C
+2 Hours
D
Exit
Information
Fiv...
E
Fri, 1 Jan 7:00 pm
8:00 pm - 9:00 pm
)Dark Angel
Page
E
Watch
1 5 7
1
A
Red (View Mode): View the list of program that are
playing now or coming up.
2
Green (-2 hours): Viewing the list of program to be
broadcasted before 2 hours.
3
C
Yellow (+2 hours): Viewing the list of program to be
broadcasted after 2 hours.
D
4
Blue (Exit): Exits the guide.
Information: Displays details of the selected
5
program.
6
(Page): Moves to the previous / next page.
7
ENTERE button
When selecting the current program, you can – watch the selected program.
When selecting the future program, you can – reserve to watch the selected program. To cancel the schedule, press the ENTERE button again and select Cancel Schedules.
1 2 3 4 5 6 7
English
11
Basic Features
ABCD
P
POWER
FA V . CH MTS
Channel Menu
Seeing Channels ¦
Channel List
MENU
O m
→ ENTER
Add, delete or set Favorite channels and use the program guide for digital broadcasts.
Select a channel in the All Channels, Added Channels, Favorite or Programmed screen by pressing the ▲ / ▼ buttons, and pressing the
ENTERE button. Then you can watch the selected channel.
Added Channels
Air A Antenna B Zoom C Select Page T Tools
■ All Channels: Shows all currently available channels.
■ Added Channels: Shows all added channels.
*
■ Favorite: Shows all favorite channels.
■ Programmed: Shows all currently reserved programs.
Using the color buttons with the ✎Channel List
x x
number.
x
Select desired channels and press the Yellow button to set all the selected channels at the same time. The c mark appears to the left of the selected channels.
x
T x (Tools): Displays the Channel List option menu.
(The Options menus may differ depending on the situation.)
Channel Status Display Icons
Icons Operations
c
*
)
\
(
→ Channel → Channel List
E
02 Air
04.1 ♥ TV #6
05 Air
07 Air 09 Air
11.1 ♥ TV #9
13 Air
14.1 ♥ TV #10
16.1 ♥ TV #11
Red (Antenna): Switches to Air or Cable. Green (Zoom): Enlarges or shrinks a channel
Yellow (Select): Selects multiple channel lists.
(Page): Move to next or previous page.
A channel selected. A channel set as a Favorite. A reserved Program. A locked channel. A program currently being broadcast.
Using Favorite Channels ¦
MENU Om → Channel → Channel List → ENTERE
*
Add to Favorite / Delete from Favorite
Set channels you watch frequently as Favorites.
1. Select a channel and press the TOOLS
button.
2. Add or delete a the channel using the Add to Favorite or Delete from Favorite menu
respectively.
02 Air
04.1 ♥ TV #6
Added Channels
Air A Antenna B Zoom C Select Page T Tools
05 Air
07 Air 09 Air
11.1 ♥ TV #9
13 Air
14.1 ♥ TV #10
16.1 ♥ TV #11
Delete Add to Favorite Lock Timer Viewing Channel Name Edit Select All
t
Memorizing channels ¦
MENU
O m
Antenna (Air / Cable)
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system).
→ Channel
→ ENTERE
t
Auto Program
Air ■ : Air antenna signal. Cable ■ : Cable antenna signal. Air+Cable ■ : Air and Cable antenna.
NOTE
✎
If the antenna is connected to xANT 2 IN (CABLE), select Cable and if it is connected to ANT 1 IN (AIR), select Air.
If both ANT 1 IN and ANT 2 IN are connected, select
x
Air+Cable.
12
English
13
English
03 Basic Features
How to Stop Auto Programming
1. Press the ENTERE button.
2. A message will ask Stop Auto Program? Select Ye s by
pressing the ◄ or ► button.
3. Press the ENTERE button.
Editing channels ¦
MENU Om → Channel → Channel List → ENTERE
Channel Name Edit
(in Channel List)
1. Select a channel and press the TOOLS button.
2. Edit the channel name or number using the Channel Name Edit menu.
Channel Name Edit ■ (analog channels only): Assign your
own channel name.
t
Other Features ¦
MENU
O m
→ Channel
→ ENTERE
Timer Viewing ■ : You can set a desired channel to be displayed automatically at the set time; even when you are watching another channel. Set the current time first to use this function. (P. 18)
1. Press the ◄ / ► /▲ / ▼ buttons to select the desired channel in Channel List.
2. Press the TOOLS button, then select Timer Viewing.
3. Scroll up or down to adjust the settings in the box, or
use the numeric buttons on your remote for entering the date and time.
If you selected ✎Once, Every Week or Every Day in
Repeat, you can enter the date you want.
4.
Select OK, then press the ENTERE button when done.
NOTE
✎
Only memorized channels can be reserved.
x
Reserved programs will be displayed in the
x
Programmed menu. When a digital channel is selected, press the x►
button to view the digital program.
Select All ■ : Select all the channels in the channel list. Deselect All ■ : Deselect all the selected channels.
You can only select ✎Deselect All when one or more channels are selected.
Channel List
MENU Om → Channel → Channel List → ENTERE
Channel List Option Menu
Set each channel using the Channel List menu options (Add/ Delete, Lock / Unlock, Timer Viewing, Select All/ Deselect All). Option menu items may differ depending on the channel
status.
1. Select a channel and press the TOOLS button.
2. Select a function and change its settings. Add / Delete ■ : Delete or add a channel to display the
channels you want.
NOTE
✎
All deleted channels will be shown on the xAll Channels menu.
A gray-colored channel indicates the channel has
x
been deleted. The xAdd menu only appears for deleted channels. Delete a channel from the xAdded Channels or
Favorite menu in the same manner.
Lock / Unlock ■ : Lock a channel so that the channel cannot
be selected and viewed.
NOTE
✎
This x function is available only when the Child Lock is set to On.
The PIN input screen appears. Enter your 4-digit
x
PIN, the default of which is “0-0-0-0”. Change the PIN using the Change PIN option.
t
Programmed
(in Channel List) You can view, modify or delete a show you have reserved to
watch.
1. Press the
2. Press the ◄ and ▼ button move to the Programmed
menu.
Change Info ■ : Change a show you have reserved to watch. Cancel Schedules ■ : Cancel a show you have reserved to
watch. Information ■ : Display a show you have reserved to watch.
(You can also change the reservation Information.) Select All / Deselect All: ■ You can select or deselect all
channels in the channel list.
ENTERE
button to select Channel List.
Fine Tune
(analog channels only) If the reception is clear, you do not have to fine tune the channel,
as this is done automatically during the search and store operation. If the signal is weak or distorted, fine tune the channel manually.
Select xFine Tune in the Channel menu.
Fine tuned channels that have been saved are marked
✎
with an asterisk “*” on the right-hand side of the channel number in the channel banner.
To reset the fine-tuning, select ✎Reset.
Basic Features
LNA (Off / On)
If the TV is operating in a weak-signal area, the LNA (Low Noise Amplifier) function can improve the reception (a low­noise preamplifier boosts the incoming signal).
Color System (Auto / PAL-M / PAL-N / NTSC)
Normally the TV can receive image and sound with good quality in Auto mode. This mode detects the color signal sources automatically. If the color implementation is unsatisfactory, select any of PAL-M, PAL-N or NTSC.
Picture Menu
Changing the Preset Picture Mode ¦
MENU
O m
Mode
Select your preferred picture type.
Dynamic ■ : Suitable for a bright room. Standard ■ : Suitable for a normal environment. Movie ■ : Suitable for watching movies in a dark room.
→ Picture → Mode → ENTER
t
E
Adjusting picture settings ¦
MENU
O m
→ Picture → Backlight → ENTER
E
Backlight / Contrast / Brightness / Sharpness / Color / Tint (G/R)
Your television has several setting options for picture quality control.
NOTE
✎
When you make changes to xBacklight, Contrast, Brightness, Sharpness, Color or Tint (G/R) the OSD will be adjusted accordingly.
In PC mode, you can only make changes to
x
Backlight, Contrast and Brightness. Settings can be adjusted and stored for each
x
external device connected to the TV.
Economical Solutions ¦
ECO Solution
MENU
O m
Energy Saving (Off / Low / Medium / High / Picture ■ Off / Auto)
TV in order to reduce power consumption. If you select Picture Off, the screen is turned off , but the sound remains on. Press any button except volume button to turn on the screen.
No Signal Power Off (Off / 15 min / 30 min / 60 min) ■ : Sets how quickly the TV switches to standby mode, if no picture is being received.
→ Picture → ECO Solution → ENTER
t
Disabled when the PC is in power saving mode.
✎
: This adjust the brightness of the
Changing the Picture Options ¦
Advanced Settings
MENU
O m
ENTER
(available in Standard / Movie mode) Compared to previous models, new Samsung TVs have
more precise pictures.
In ✎PC mode, you can only make changes to Dynamic Contrast, Gamma and White Balance.
Black Tone : Off ►
Dynamic Contrast : Medium
Shadow Detail : 0
Gamma : 0
RGB Only Mode : Off
Color Space : Native
White Balance
Black Tone (Off / Dark / Darker / Darkest) ■ : Select the black level to adjust the screen depth.
Dynamic Contrast (Off / Low / Medium / High) ■ : Adjust the screen contrast.
Shadow Detail ■ : Increase the brightness of dark images.
Gamma ■ : Adjust the primary color intensity. RGB Only Mode (Off / Red / Green / Blue) ■ : Displays
the Red, Green and Blue color for making fine adjustments to the hue and saturation.
→ Picture → Advanced Settings →
E
Advanced Settings
▼
U Move E Enter R Return
Disabled under ✎PC mode.
E
14
English
15
English
03 Basic Features
Color Space (Auto / Native) ■ : Adjust the range of colors
available to create the image. White Balance ■ : Adjust the color temperature for a more
natural picture. R-Offset / G-Offset / B-Offset: Adjust each color's
(red, green, blue) darkness. R-Gain / G-Gain / B-Gain : Adjust each color's (red,
green, blue) brightness. Reset: Resets the White Balance to it's default
settings.
Flesh Tone ■ : Emphasize pink “flesh tone”. Edge Enhancement (Off / On) ■ : Emphasize object
boundaries.
Picture Options
MENU
O m
ENTER
In PC mode, you can only make changes to the ✎Color Tone, Size and Auto Protection time.
Color Tone : Normal ►
Size : 16:9
Digital Noise Filter : Auto
MPEG Noise Filter : Auto
HDMI Black Level : Normal
Film Mode : Off
Auto Protection Time : 2 hours
Color Tone (Cool / Normal / Warm1 / Warm2) ■
Size ■ : Your cable box/satellite receiver may
have its own set of screen sizes as well. However, we highly recommend you use 16:9 mode most of the time.
16:9: Sets the picture to 16:9 wide mode. Zoom1: Use for moderate magnification. Zoom2: Use for a stronger magnification. Wide Fit: Enlarges the aspect ratio of the picture to fit
the entire screen.
4:3: Sets the picture to basic (4:3) mode.
Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are input.
→ Picture → Picture Options →
E
Picture Options
U Move E Enter R Return
Warm1 ✎ or Warm2 is only deactivated when the
picture mode is Dynamic. Settings can be adjusted and stored for each
✎
external device connected to an input on the TV.
Do not watch in 4:3 format for a long time. Traces
✎
of borders displayed on the left, right and center of the screen may cause image retention (screen burn) which are not covered by the warranty.
NOTE
✎
After selecting xZoom1, Zoom2 or Wide Fit:
1. Press the ► button to select Position.
2. Press the ENTERE button.
3. Press the ▲ or ▼ button to move the picture up
or down.
4. Press the ENTERE button.
5. Press the ► button to select Reset.
6. Press the ENTERE button.
After selecting Screen Fit in HDMI (1080i / 1080p)
x
or Component (1080i / 1080p) mode: Adjusts the Position or Size by using ▲, ▼, ◄ or ► button.
HD (High Definition): 16:9 - 1080i/1080p (1920x1080),
x
720p (1280x720) Settings can be adjusted and stored for each
x
external device you have connected to an input on the TV.
Input Source Picture Size
ATV, AV, Component (480i, 480p) DTV(1080i), Component (1080i, 1080p), HDMI (720p, 1080i, 1080p) PC 16:9, 4:3
Digital Noise Filter (Off / Low / Medium / High / Auto ■ / Auto Visualization): If the broadcast signal received by your TV is weak, you can activate the Digital Noise Filter feature to reduce any static and ghosting that may
appear on the screen.
When the signal is weak, try other options until the
✎
best picture is displayed.
Auto Visualization: When changing analog channels, displays signal strength.
Only available for analog channels.
✎
When bar is green, you are receiving the best
✎
possible signal.
MPEG Noise Filter (Off / Low / Medium / High / ■ Auto): Reduces MPEG noise to provide an improved
picture quality.
Disabled under PC mode.
✎
HDMI Black Level (Normal / Low) ■ : Selects the black level on the screen to adjust the screen depth.
Available only in HDMI mode (RGB signals).
✎
Film Mode (Off / Auto1 / Auto2) ■ : Sets the TV to automatically sense and process film signals from all sources and adjust the picture for optimum quality.
Available in TV, AV, COMPONENT (480i / 1080i)
✎
and HDMI (480i / 1080i).
16:9, Zoom1, Zoom2, 4:3
16:9, 4:3, Wide Fit, Screen Fit
Basic Features
Auto Protection Time (2 hours / 4 hours / 8 hours ■ / 10 hours / Off): If the screen remains idle with a still
image for a certain period of time defined by the user, the screen saver is activated to prevent the formation of ghost images on the screen.
Picture Reset (OK / Cancel)
Resets your current picture mode to it's default settings.
Setting up the TV with your PC ¦
Set the input source to PC.
Auto Adjustment
MENU
O m
ENTER
Adjust frequency values/positions and fine tune the settings automatically.
Not available when connecting through HDMI/DVI
✎
cable.
→Picture → Auto Adjustment →
E
t
Screen
Coarse / Fine ■ : Removes or reduces picture noise. If the
noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Fine­tune again. After the noise has been reduced, readjust the picture so that it is aligned to the center of screen.
Position ■ : Adjust the PC’s screen positioning if it does not fit the TV screen. Press the ▲ or ▼ button to adjust the Vertical-Position. Press the ◄ or ► button to adjust the Horizontal-Position.
Image Reset ■ : Resets the image to default settings.
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP) Depending on the version of Windows and the video card,
the actual screens on your PC may differ in which case the same basic set-up information will almost always be applied. (If not, contact your computer manufacturer or Samsung Dealer.)
1. Click on “Control Panel” on the Windows start menu.
2. Click on “Appearance and Themes” in the “Control
Panel” window and a display dialog-box will appear.
3. Click on “Display” and a display dialog box will appear.
4. Navigate to the “Settings” tab on the display dialog-box.
The correct size setting (resolution) [Optimum: 1360 x y 768 pixels]
If a vertical-frequency option exists on your display y settings dialog box, the correct value is ‘60’ or ‘60 Hz’. Otherwise, just click ‘OK’ and exit the dialog box.
Sound Menu
Changing the Preset Sound Mode ¦
MENU
O m
Mode
Standard ■ : Selects the normal sound mode. Music ■ : Emphasizes music over voices. Movie ■ : Provides the best sound for movies. Clear Voice ■ : Emphasizes voices over other sounds. Amplify ■ : Increase the intensity of high-frequency sound
to allow a better listening experience for the hearing impaired.
→ Sound → Mode → ENTER
t
E
Adjusting sound settings ¦
MENU
O m
→ Sound → Equalizer → ENTER
E
Equalizer
Adjusts the sound mode. (standard sound mode only).
Balance L/R ■ : Adjusts the balance between the right and left speaker.
100Hz / 300Hz / 1KHz / 3KHz / 10KHz ■ (Bandwidth Adjustment): Adjusts the level of specific bandwidth frequencies.
Reset ■ : Resets the equalizer to its default settings.
Sound Settings ¦
MENU
O m
→ Sound → ENTER
E
Virtual Surround (Off / On)
(standard sound mode only) This function provides a virtual 5.1 channel surround sound
experience through a pair of speakers or headphones using HRTF (Head Related Transfer Function) technology.
If ✎Speaker Select is set to External Speaker, Virtual
Surround is disabled.
Dialog Clarity (Off / On)
(standard sound mode only) Dialog Clarity emphasizes voice while maintaining the
background sound level.
16
English
17
English
03 Basic Features
Audio Language
(digital channels only) Change the default value for audio languages.
The available language may differ depending on the
✎
broadcast.
t
Multi-Track Sound (MTS)
(analog channels only)
Mono ■ : Choose for channels that are broadcasting in mono or if you are having difficulty receiving a stereo signal.
Stereo ■ : Choose for channels that are broadcasting in stereo.
SAP ■ : Choose to listen to the Separate Audio Program, which is usually a foreign-language translation.
Depending on the particular program being
✎
broadcasted, you can listen to Mono, Stereo or SAP.
Auto Volume (Off / Normal / Night)
To equalize the volume level on each channel, set to Normal.
Night ■ : This mode provides an improved sound
experience compared to Normal mode, making almost no noise. It is useful at night.
Speaker Select (External Speaker / TV Speaker)
A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver. In this case, set the TV to External Speaker.
When ✎Speaker Select is set to External Speaker, the volume and MUTE buttons will not operate and the sound settings will be limited.
When ✎Speaker Select is set to External Speaker, you should use these settings.
TV speaker: Off , External speaker: On
x
When ✎Speaker Select is set to TV Speaker, you should use these settings.
TV speaker: On , External speaker: On
x
If there is no video signal, both speakers will be mute.
✎
Audio Delay ■ : Correct audio-video mismatch, when watching TV or video, and listening to digital audio output using an external device such as an AV receiver (0ms ~ 250ms).
Sound Reset (OK / Cancel)
Reset all sound settings to the factory defaults.
Setup Menu
Setting the Time ¦
MENU
O m
→ Setup → Time → ENTER
E
Time
Clock ■ : Setting the clock is for using various timer features
of the TV.
The current time will appear every time you press the
O
INFO button.
If you disconnect the power cord, you have to set the
✎
clock again.
Clock Mode: Set up the current time manually or automatically.
Auto – : Set the current time automatically using the time from the digital channel.
The antenna must be connected in order to set the
✎
time automatically.
Manual – : Set the current time manually
Depending on the broadcast station and signal, the
✎
auto time set up may not be correct. In this case, set the time manually.
Clock Set: Set the Day, Month, Year, Hour, Minute and am/pm.
Available only when ✎Clock Mode is set to Manual. You can set the ✎Day, Month, Year, Hour, and
Minute directly by pressing the number buttons on the remote control.
Time Zone: Select your time zone.
This function is only available when the ✎Clock Mode is set to Auto.
SPDIF Output
SPDIF (Sony Philips Digital Interface) is used to provide digital sound, reducing interference going to speakers and various digital devices such as a DVD player.
Audio Format ■ : During the reception of a digital TV broadcast, you can select the Digital Audio output (SPDIF) format from the options PCM or Dolby Digital.
By connecting to 5.1ch speakers in a dolby
✎
digital setup, maximize your interactive 3D sound experience.
Basic Features
Using the Sleep Timer ¦
MENU
O m
ENTER
Sleep Timer ■
after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes).
→ Setup → Time → Sleep Timer →
E
t
To cancel the ✎Sleep Timer, select Off.
: Automatically shuts off the TV
Setting the On/Off Timer ¦
MENU Om → Setup → Time → Timer 1 → ENTERE
Timer 1 / Timer 2 / Timer 3 ■ : Three different on / off timer
settings can be made. You must set the clock first.
On Time
▲
Inactivate 12 00 am
▼
Off Time
Inactivate 12 00 am
Volume Source Antenna Channel
10 TV Air 0
Repeat
Once
On Time / Off Time: Set the hour, minute, am/pm and activate / inactivate. (To activate the timer with the setting you have chosen, set to Activate.)
Volume: Set the desired volume level. Source: Select TV or USB content to be played when the
TV is turned on automatically. (USB can be selected only when a USB device is connected to the TV)
Antenna (when the Source is set to TV): Select Air or Cable.
Channel (when the Source is set to TV): Select the
desired channel.
Timer 1
Sun Mon Tue Wed Thu Fri Sat
L Move U Adjust E Enter R Return
Contents (when the Source is set to USB): Select a folder in the USB device containing music or photo files to be played when the TV is turned on automatically.
If there is no music file on the USB device or the
✎
folder containing a music file is not selected, the Timer function does not operate correctly.
When there is only one photo file in the USB device,
✎
the Slide Show will not play. If a folder name is too long, the folder cannot be
✎
selected. Each USB you use is assigned its own folder. When
✎
using more than one of the same type of USB, make sure the folders assigned to each USB have different names.
Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at you convenience. If you select Manual, you can set up the day you want to activate the timer.
The
✎ c
mark indicates the day is selected.
Auto Power Off (available only when the TV is turned on by
✎
the Timer): The TV will be automatically turned off after 3 hours of being left idle to prevent overheating.
Locking Programs ¦
MENU
O m
→ Setup → Security → ENTER
E
Security
The PIN input screen appears before the setup screen. ✎ Enter your 4-digit PIN, the default of which is 0-0-0-0. ✎
Change the PIN using the Change PIN option. Child Lock (Off / On) ■ : Lock channels in Channel List,
to prevent unauthorized users, such as children, from watching unsuitable program.
Parental Lock ■ : Prevent unauthorized users, such as children, from watching unsuitable program with a userdefined 4-digit PIN code.
Allow All: Unlock all TV ratings. Change PIN: The Change PIN screen will appear. Choose ■
any 4 digits for your PIN and enter them. As soon as the 4 digits are entered, the Confirm New PIN screen appears. Re-enter the same 4 digits. When the Confirm screen disappears, your PIN has been memorized.
If you forget the PIN, press the remote-control
✎
buttons in the following sequence, which resets the pin to “0-0-0-0” : POWER (off) → MUTE → 8 → 2 → 4 → POWER (on).
18
English
19
English
03 Basic Features
Other Features ¦
MENU
O m
→ Setup → ENTER
E
Menu Language
Set the menu language.
1. Select Menu Language and press the ENTERE button.
2. Choose desired language and press the ENTERE button.
Caption
(On-Screen Text Messages)
Caption (Off / On) ■ : You can switch the caption function on or off. If captions are not available, they will not be displayed on the screen.
The Caption feature does not work in
✎
Component, HDMI or PC modes.
Caption Mode ■ : You can select the desired caption mode.
The availability of captions depends on the program
✎
being broadcasted.
CC1~CC4 / Text1~Text4: (analog channels only) The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device to the TV. (Depending on the broadcasting signal, the Analog Caption function may or may not work with digital channels.)
General
Game Mode (Off / On) ■ : When connecting to a game
console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by selecting game mode.
NOTE
✎
Precautions and limitations for game mode
x
To disconnect the game console and connect – another external device, set Game Mode to Off in the setup menu.
If you display the TV menu in – Game Mode, the screen shakes slightly.
Game Mode x is not available in TV or PC.
After connecting the game console, set xGame Mode to On. Unfortunately, you may notice reduced picture qualit y.
If xGame Mode is On:
Picture – mode is set to Standard and Sound mode is set to Movie.
Equalizer – is not available.
Menu Transparency (Bright / Dark) ■ : Set the
Transparency of the menu. Melody (Off / Low / Medium / High) ■ : Set so that a
melody plays when the TV is turned on or off.
NOTE
✎
Only available when the Input source is set to TV.
x
To turn the melody off, set Melody to Off. The Melody does not play.
x
When no sound is output from the TV because the –
MUTE button has been pressed.
When no sound is output from the TV because the – volume has been reduced to minimum with the
VOL – button.
When the TV is turned off by – Sleep Timer function.
AV Color System ( Auto / PAL-M / PAL-N / NTSC ) ■
Normally the TV can receive image and sound with good quality when in the mode Auto. This mode detects the signal color system automatically. In case of some signal reception with color unsatisfactory, select the AV Color System Mode to PAL-M, PAL-N or NTSC.
This function is available only in AV mode.
✎
Picture In Picture (PIP) ¦
t
PIP
MENU
O m
You can watch the TV tuner and one external video source simultaneously. PIP (Picture-in-Picture) does not function in the same mode.
NOTE
✎
For PIP sound, refer to the Sound Select instructions.
x
You may notice that the picture in the PIP window
x
becomes slightly unnatural when you use the main screen to view a game or karaoke.
PIP Settings
x
PIP (Off / On) ■ : Activate or deactivate the PIP function. Air / Cable (Air / Cable) ■ : Select either Air or Cable as
the input source for the sub-screen.
Channel ■ : Select the channel for the sub-screen. Size ( ■
→ Setup → PIP → ENTER
Main picture Sub picture Component, HDMI/DVI,
PC
Õ
/ Ã ): Select a size for the sub-picture.
E
TV
Basic Features
Position ( ■ sub-picture.
Sound Select (Main / Sub) ■ : You can choose the desired sound (Main or Sub) in PIP mode.
Ã
/ – / — / œ): Select a position for the
Support Menu
MENU
O m
→ Support → ENTER
E
Self Diagnosis
Picture Test ■ : Use to check for picture problems and if
the problem continues to occur check the color pattern. Yes: If the test pattern does not appear or there is noise
in the test pattern, select Yes. There may be a problem with the TV. Therefore, contact Samsung’s call Center for assistance.
No: If the test pattern is properly displayed, select No. There may be a problem with your external equipment. Please check your connections. If the problem persists, refer to the external device’s user manual.
Sound Test ■ : Use the built-in melody sound to check for sound problems.
If you hear no sound from the TV’s speakers,
✎
before performing the sound test, make sure
Speaker Select is set to TV speaker in the Sound menu.
The melody will be heard during the test even if
✎
Speaker Select is set to External Speaker or the sound is muted by pressing the MUTE button.
Yes: If you can hear sound only from one speaker or not at all during the sound test, select Yes. There may be a problem with the TV. Therefore, contact Samsung’s call Center for assistance.
No: If you can hear sound from the speakers, select No. There may be a problem with your external equipment. Please check your connections. If the problem persists, refer to the external device’s user manual.
Signal Information ■ : (digital channels only) HDTV channel’s reception quality is either perfect or the channels are unavailable. Adjust your antenna to increase signal strength.
Troubleshooting ■ : If the TV seems to have a problem, refer to this description.
If none of these troubleshooting tips apply, contact
✎
the Samsung customer service center.
Software Upgrade
Software Upgrade can be performed by downloading the
latest firmware from samsung.com to a USB memory device. Current Version the software already installed in the TV.
Software is represented as ‘Year/Month/Day_Version’.
✎
Software Upgrade
Current Version 2010/11/29_000334
By USB ►
Alternative Software
L Move E Enter R Return
Installing the Latest Version
By USB ■ : Insert a USB
drive containing the firmware upgrade file, downloaded from www. samsung.com, into the TV. Please be careful not to disconnect the power or remove the USB drive until upgrades are complete. The TV will be turned off and on automatically after completing the firmware upgrade. When software is upgraded, video and audio settings you have made will return to their default settings. We advise you to write down your settings so that you can easily reset them after the upgrade.
Alternative Software ■ (Not available)
USB Drive
TV Side Panel
HD Connection Guide
Refer to this information when connecting external devices to the TV.
Contact Samsung
View this information when your TV does not work properly or when you want to upgrade the software. You can find information regarding our call centers and how to download products and software.
20
English
SUM
Advanced Features
Media Play
04 Advanced Features
Enjoy photos, music and/or movie files saved on a USB Mass Storage Class (MSC) device.
MENU
O m
ENTER
→ Application → Media Play →
E
MediaPlay
Videos
Change Device
View Devices E Enter R Return
Connecting a USB Device ¦
1. Turn on your TV.
2. Connect a USB device containing photo, music and/or movie files to the
USB jack on the side of the TV.
3. When USB is connected to the TV, popup window appears.
Then you can select Media Play.
It might not work properly with unlicensed multimedia files.
✎
Need-to-Know List before using ✎Media Play
MTP (Media Transfer Protocol) is not supported.
x
The file system supports FAT16, FAT32 and NTFS.
x
Certain types of USB Digital camera and audio devices may not be compatible with this TV.
x
Media Play only supports USB Mass Storage Class (MSC) devices. MSC is a Mass Storage Class Bulk-Only
x
Transport device. Examples of MSC are Thumb drives, Flash Card Readers (USB HUB are not supported). Devices should be connected directly to the TV’s USB port.
Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data.
x
SAMSUNG is not responsible for any data file damage or data loss. Do not disconnect the USB device while it is loading.
x
The higher the resolution of the image, the longer it takes to display on the screen.
x
The maximum supported JPEG resolution is 15360X8640 pixels.
x
For unsupported or corrupted files, the “Not Supported File Format” message is displayed.
x
If the files are sorted by Basic View, up to 1000 files can be displayed in each folder.
x
MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management
x
(DRM) is a technology that supports the creation, distribution and management of the content in an integrated and comprehensive way, including the protection of the rights and interests of the content providers, the prevention of the illegal copying of contents, as well as managing billings and settlements.
If more than 2 PTP devices are connected, you can only use one at a time.
x
If more than two MSC devices are connected, some of them may not be recognized. A USB device that requires high
x
power (more than 500mA or 5V) may not be supported. If an over-power warning message is displayed while you are connecting or using a USB device, the device may not
x
be recognized or may malfunction. If the TV has been no input during time set in xAuto Protection Time, the Screensaver will run. If a USB HDD supports the energy saving mode, the energy saving mode may be automatically off.
x
If a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read.
x
If a USB device connected to the TV is not recognized, the list of files on the device is corrupted or a file in the list is
x
not played, connect the USB device to the PC, format the device and check the connection. If a file deleted from the PC is still found when Media Play is run, use the “Empty the Recycle Bin” function on the PC
x
to permanently delete the file.
USB Drive
TV Side Panel
English
21
Loading...
+ 46 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use