Samsung LN26R71B User Manual

Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

Contacte con SAMSUNG WORLD-WIDE Si tiene alguna pregunta o comentario referente a nuestros productos, por favor contacte con nuestro Servicio de Atención al Cliente.

LN26R71B

Contate a SAMSUNG EM TODO O MUNDO Caso tenha dúvidas ou comentários sobre os produtos da Samsung, entre em contato com o centro de atendimento ao cliente da SAMSUNG.

Country

ARGENTINE

BRAZIL

CHILE

COSTA RICA

ECUADOR

EL SALVADOR

GUATEMALA

JAMAICA

MEXICO

PANAMA

PUERTO RICO

REP.DOMINICA

TRINIDAD &TOBAGO

VENEZUELA

0800-333-3733

0800-124-421

800-726-7864 (SAMSUNG)

0-800-507-7267

1-800-10-7267

800-6225

1-800-299-0013

1-800-234-7267

01-800-SAMSUNG (7267864)

800-7267

1-800-682-3180

1-800-751-2676

1-800-7267-864

1-800-100-5303

Customer Care Center

LN32R71B LN40R71B

TFT-LCD TELEVISION

Web Site

www.samsung.com/ar

www.samsung.com/br

www.samsung.com/cl

www.samsung.com/latin

www.samsung.com/mx

www.samsung.com/latin

IMPORTADO POR:SAMSUNG ELECTRONICS MÉXICO.S.A.de C.V. Vía Lopez Portillo No.6, Col.San Fco.Chilpan Tultitlán,Estado de México,C.P.54940 TEL.01-55-5747-5100 / 01-800-726-7864

EXPORTADO POR:Samsung Electronics CO.,LTD. 416,Mae tan-3dong,Yeongtong -gu, Suwon City,Gyeonggi-do Korea

Owner’s Instructions

BN68-00998E-01

Precautions When Displaying a Still Image

A still image may cause permanent damage to the TV screen.

• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention.

This image retention is also known as "screen burn". To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.

• Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of the screen

• Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.

To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.

Precauciones al mostrar en la pantalla una imagen fija

La imagen fija puede causar daños permanentes en la pantalla del televisor.

• No deje una imagen fija en la pantalla LCD durante más de dos horas ya que se podría producir una retención de la imagen en la pantalla. Este fenómeno de

retención de imágenes también se denomina "quemadura de pantalla". Para evitar que se produzca esa persistencia de la imagen, reduzca el nivel de luminosidad y de contraste de la pantalla cuando muestre imágenes fijas.

• El uso del televisor LCD en formato 4:3 durante un tiempo prolongado puede dejar rastros de bordes en las partes izquierda,

• Ver imágenes fijas de videojuegos y PC durante más tiempo del indicado puede producir restos de imágenes parciales.

Para evitar este efecto, reduzca el 'brillo' y el 'contraste' cuando vea imágenes fijas.

Precauções ao exibir uma imagem estática

Uma imagem estática pode causar danos permanentes na tela da TV.

• Não exiba uma imagem estática no painel LCD por mais de 2 horas, pois isso poderá causar retenção de imagem na tela.

Essa retenção de imagem também é conhecida como "queima da tela". Para evitar essa retenção de imagem, reduza o grau de brilho e de contraste da tela ao exibir uma imagem estática.

• O fato de assistir a TV LCD no formato 4:3 por um longo período de tempo pode deixar traços de bordas exibidos nas partes esquerda,

• A exibição de imagens estáticas de Video games e PC por mais tempo que um determinado período pode produzir pós-imagens parciais.

Para evitar esse efeito, reduza o ‘brilho’ e o ‘contraste’ ao exibir imagens estáticas.

caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty.

derecha y central de la pantalla debido a las diferencias en la emisión lumínica de la pantalla. La reproducción de un DVD o el uso de una consola de videojuegos pueden provocar un efecto similar en la pantalla. Reproducir un DVD o una videoconsola puede causar un efecto similar en la pantalla. La garantía no cubre estos daños.

direita e central da tela, causados pela diferença da emissão de luz na tela. A utilização de um DVD ou de um console de jogo pode causar um efeito similar na tela. Danos provocados pelo efeito acima não são cobertos pela Garantia.

GENERAL INFORMATION

List of Features .................................................................................. 2

Accessories........................................................................................ 2

Viewing the Control Panel.................................................................. 3

Viewing the Connection Panel ........................................................... 4

Remote Control .................................................................................. 6

Installing Batteries in the Remote Control ......................................... 7

CONNECTIONS

Connecting VHF and UHF Antennas ................................................. 7

Connecting Cable TV ......................................................................... 8

Connecting a VCR ............................................................................. 9

Connecting an S-VHS VCR ............................................................... 9

Connecting a Camcorder

Connecting a DVD Player .................................................................. 10

Connecting a DVD Player/Set-Top Box via DVI ................................ 10

Connecting a DVD Player/Set-Top Box via HDMI ............................. 11

Connecting an Amplifier/DVD Home Theater .................................... 11

Connecting a PC ................................................................................ 12

OPERATION

Turning the TV On and Off ............................................................... 13

Plug & Play Feature ........................................................................... 13

Changing Channels ........................................................................... 14

Adjusting the Volume ......................................................................... 14

Viewing the Display............................................................................ 15

Viewing the Menus............................................................................. 15

Memorizing the Channels .................................................................. 16

To Select the Source (depending on the model) ............................... 17

To Edit the Input Source Name (depending on the model) ............... 17

PICTURE CONTROL

Using Automatic Picture Settings ................................................. 18

Adjusting the Color Tone .............................................................. 19

DNIe Demo (Digital Natural Image engine).................................. 19

Changing the Screen Size ............................................................ 20

Freezing the Picture ..................................................................... 21

Viewing Picture-in-Picture............................................................. 21

(LN32R71B/LN40R71B)

............................... 10

CHANNEL CONTROL

Setting the Channel Manager ....................................................... 26

Activating the Child Lock ............................................................. 27

Fine Tuning Analog Channels....................................................... 28

PC DISPLAY

Using Your TV as a Computer (PC) Display ................................ 29

Display Modes .............................................................................. 29

Setting up the TV with your PC .................................................... 30

TIME SETTING

Setting the Clock .......................................................................... 32

FUNCTION DESCRIPTION

Selecting a Menu Language ......................................................... 34

Setting the Blue Screen Mode...................................................... 34

Setting the On/Off Melody ............................................................ 35

Digital Noise Reduction ................................................................ 35

Using the Game Mode.................................................................. 35

Viewing Closed Captions (On-Screen Text Messages)

Using the Energy Saving Feature ................................................ 37

Using the Color system Feature................................................... 37

APPENDIX

Identifying Problems .................................................................... 38

Installing the Stand ....................................................................... 39

Disconnecting the Stand............................................................... 39

Installing the Wall Mount Kit (LN26R71B) .................................... 40

Installing the Wall Mount Kit (LN32R71B/LN40R71B) ................. 41

Using the Anti-Theft Kensington Lock .......................................... 42

Specifications................................................................................ 42

English

................ 36

SOUND CONTROL

Customizing the Sound ................................................................ 23

Using Automatic Sound Settings ................................................. 23

Setting the TruSurround XT.......................................................... 23

Choosing a Multi-Channel Sound (MTS) track ............................ 24

Automatic Volume Control ............................................................ 24

Selecting the Internal Mute ........................................................... 24

Listening to the Sound of the Sub (PIP) Picture .......................... 25

Resetting the Sound Settings to the Factory Defaults ................. 25

Connecting headphones............................................................... 25

Symbol Press Important Note One-Touch

Button

English-1

General Information

List of Features

 Adjustable picture settings that can be stored in the TV’s memory.  Automatic timer to turn the TV on and off.  Aspecial sleep timer.  Excellent Picture Quality

DNIe technology provides life-like clear images.

 SRS TruSurround XT

SRS TruSurround XT provides a virtual Dolby surround system.

Accessories

Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.

Remote Control & Batteries (AAA x 2) Power Cord Cover-Bottom

M4 X L16

Stand LN26R71B LN32R71B

The items color and shape may vary depending on the model.

Screw Owner’s Instructions Warranty Card / Registration

Card / Safety Guide Manual

(Not available in all locations)

English-2

Viewing the Control Panel

Buttons on the Lower-Right Part of the Panel

The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control.

The product color and shape may vary depending on the model.

SOURCE

Toggles between all the available input sources (TV, AV1, AV2, S-Video, Component1, Component2, PC, HDMI). In the on-screen menu, use this button as you would use the ENTER button on the remote control.

26 inch model supports TV, AV, S-Video,

Component1, Component2, PC and HDMI only.

Press to see an on-screen menu of your TV’s features.

Press to increase or decrease the volume. In the on-screen menu, use the buttons as you would use the

 and  buttons on the remote control.

English-3

Press to change channels. In the on-screen menu, use the buttons as you would use the  and  buttons on the remote control.

SPEAKERS

Press to turn the TV on and off.

POWER INDICATOR

Blinks and turns off when the power is on and lights up in stand-by mode.

REMOTE CONTROL SENSOR

Aim the remote control towards this spot on the TV.

(POWER)

Viewing the Connection Panel

Rear Panel Jacks

Use the rear panel jacks to connect A/V components that will be connected continuously, such as VCR or DVD players. For more information on connecting equipment, see pages 7-12.

LN26R71B

LN32R71B/ LN40R71B

AV IN 1

Video and audio inputs for external devices, such as a camcorder or VCR.

S-VIDEO

Connect an S-Video signal from a camcorder or VCR.

COMPONENT IN 1, 2

Connect Component video/audio.

HDMI/DVI IN / DVI IN (AUDIO R/L)

Connect to the HDMI jack of a device with an HDMI output.

Use the HDMI/DVI IN terminal for DVI connection to an external device. You should use the DVI to HDMI cable or DVI-HDMI adapter (DVI to HDMI) for video connection, and the DVI IN ‘R-AUDIO-L’ terminal for audio.

- HDMI/DVI IN terminal does not support PC.

- No sound connection is needed for an HDMI to HDMI connection

ANT IN

Connect to an antenna or cable TV system.

SERVICE

Connector for service only.

English-4

AUDIO OUT (R/L)

Connect to the audio input jacks on your Amplifier/ Home theater.

PC IN

Connect to the video and audio output jacks on your PC.

HEADPHONE

Connect a set of external headphones for private listening.

POWER INPUT

Connect the supplied power cord.

KENSINGTON LOCK

The Kensington lock (optional) is a device used to physically fix the system when used in a public place. If you want to use a locking device, contact the dealer where you purchased the TV.

The place of the Kensington Lock may be different depending on its model.

(LN26R71B)

Side Panel Jacks (LN32R71B/LN40R71B)

Use the left side panel jacks to connect a component that is used only occasionally, such as a camcorder or video game. (See page 10)

AV IN 2

Video and audio inputs for external devices.

S-VIDEO 2

Video inputs for external devices with an S-Video output.

HEADPHONE

Connect a set of external headphones for private listening.

English-5

Remote Control

You can use the remote control up to a distance of about 23 feet from the TV. When using the remote, always point it directly at the TV.

POWER

Turns the TV on and off.

NUMERIC BUTTONS

Press to change the channel.

–

Press to select channels over 100. For example, to select channel 121, press “ - ”, then “2”, then “1”.

CH MGR

Used to display Channel Lists on the screen.

Selects the TV mode directly

VOL / VOL

Press to increase or decrease the volume.

(

MUTE)

Press to temporarily cut off the sound.

Displays the main on-screen menu.

S.MODE

Press to select the sound mode.

PIP

Picture-in Picture ON/OFF.

P.MODE

Press to select the picture mode.

E.SAVING

Adjusts screen brightness to save energy.

DNIe(Digital Natural Image engine)

DNIe Demo On/Off

MTS

Press to choose stereo, mono or Separate Audio Program (SAP broadcast).

SLEEP

Press to select a preset time interval for automatic shut off.

Selects the PC mode directly

CH / CH

Press to change channels.

EXIT

Press to exit the menu.

UP / DOWN / LEFT /

RIGHT / ENTER

Use to select on-screen menu items and change menu values.

INFO

Press to display information on the TV screen.

CAPTION

Controls the caption decoder.

STILL

Press to stop the action during a particular scene. Press again to resume normal video.

P.SIZE

Press to change the screen size.

PIP FUCTIONS SOURCE

from an external source in PIP. POSITION : the PIP screen. CH : Displays the available channels in sequence. (These buttons change channels in the PIP window only.)

: Press to select a signal

Change the position of

SRS

Selects SRS TruSurround XT mode.

SOURCE

Press to display all of the available video sources.

PRE-CH

Tunes to the previous channel.

This is a special remote control for the visually impaired, and has Braille points on the Power,

Channel and Volume buttons.

English-6

Installing Batteries in the Remote Control

1. Lift the cover at the back of the remote control upward as shown in the figure.

2. Install two AAA size batteries.

Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.

3. Replace the cover. Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time. The remote control can be used up to about 23 feet from the TV. (Assuming typical TV usage, the batteries last for about one year.)

If the remote control doesn’t work, check the following:

1. Is the TV power on?

2. Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power outage, or is the power cord unplugged?

5. Is there a special fluorescent light or neon sign nearby?

Connections

Connecting VHF and UHF Antennas

If your antenna has a set of leads that look like this, see “Antennas with 300 ΩFlat Twin Leads” below.

If your antenna has one lead that looks like this, see “Antennas with 75 ΩRound Leads”. If you have two antennas, see “Separate VHF and UHF Antennas”.

Antennas with 300 Ω Flat T

win Leads

If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has 300 Ωtwin flat leads, follow the directions below.

1. Place the wires from the twin leads under the screws on a 300-75Ωadapter (not supplied). Use a screwdriver to tighten the screws.

ANT IN

2. Plug the adaptor into the ANT IN terminal on the back of the TV.

Antennas with 75 Ω Round Leads

ANT IN

1. Plug the antenna lead into the ANT IN terminal on the back of the TV.

Separate VHF and UHF Antennas

If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics shops).

1. Connect both antenna leads to the combiner.

UHF

VHF

2. Plug the combiner into the ANT IN terminal on the bottom of the rear panel.

ANT IN

UHF

VHF

English-7

Connecting Cable TV

To connect to a cable TV system, follow the instructions below.

Cable without a Cable Box

ANT IN

Connecting to a Cable Box that Descrambles All Channels

ANT IN

ANT OUT

1. Plug the incoming cable into the ANT IN terminal on the back of the TV.

Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels.

1. Find the cable that is connected to the ANT OUT terminal on your cable box.

This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”.

ANT IN

2. Connect the other end of this cable to the ANT IN terminal on the back of the TV.

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of RF cable. (These items are available at most electronics stores.)

1. Find and disconnect the cable that is

ANT IN

Incoming

cable

Incoming

cable

Incoming

cable

Splitter

cable

Splitter

Cable Box

Splitter

RF (A/B)

Switch

Cable Box

RF (A/B)

Switch

RF (A/B)

Switch

ANT IN

TV Rear

After you have made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to view scrambled channels. (When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)

connected to the ANT IN terminal on your cable box.

This terminal might be labeled “ANT IN”, “VHF IN” or simply, “IN”.

2. Connect this cable to a two-way splitter.

3. Connect an RF cable between an OUTPUT

terminal on the splitter and the IN terminal on the cable box.

4. Connect an RF cable between the ANT OUT terminal on the cable box and the B–IN terminal on the RF(A/B) switch.

5. Connect another cable between the other OUT terminal on the splitter and the A–IN terminal on the RF (A/B) switch.

6. Connect the last RF cable between the OUT terminal on the RF (A/B) switch and the ANT IN terminal on the rear of the TV.

English-8

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 7-8). Skip step 1 if you have not yet connected to an antenna or a cable system.

1. Unplug the cable or antenna

ANT IN

TV Rear Panel

VCR Rear Panel

Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.

Each external input source device has a different back panel configuration. When connecting an external device, match the color of the connection terminal to the cable.

Audio Cable (Not supplied)

Video Cable (Not supplied)

Antenna Cable (Not supplied)

from the back of the TV.

2. Connect the cable or antenna to the ANT IN terminal on the back of the VCR.

3. Connect an Antenna Cable between the ANT OUT terminal on the VCR and the ANT IN terminal on the TV.

4. Connect a Video Cable between the VIDEO OUT jack on the VCR and the AV 1 IN [VIDEO] jack on the TV.

5. Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AV 1 IN [R-AUDIO-L] jacks on the TV.

If you have a “mono” (non-stereo) VCR, use a Y-connector (not supplied) to hook up to the right and left audio input jacks of the TV. If your VCR is stereo, you must connect two cables.

Connecting an S-VHS VCR

Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR. (This connection delivers a better picture as compared to a standard VHS VCR.)

TV Rear Panel

VCR Rear Panel

Audio Cable (Not supplied)

S-Video Cable (Not supplied)

Antenna Cable (Not supplied)

An S-Video cable is usually included with an S-VHS VCR. (If not, check your local electronics store.)

Each external input source device has a different back panel configuration. When connecting an external device, match the color of the connection terminal to the cable. Some games may be displayed with a cut off picture when the TV is connected to a game player.

1. To begin, follow steps 1–3 in the previous section to connect the antenna or cable to your VCR and your TV.

2. Connect an S-Video Cable between the S-VIDEO OUT jack on the VCR and the AV 1 IN [S-VIDEO] jack on the TV.

3. Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AV 1 IN [R-AUDIO-L] jacks on the TV.

English-9

Connecting a Camcorder (LN32R71B/LN40R71B)

The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow you to view the camcorder tapes without using a VCR

TV Side Panel

S-Video Cable (Not supplied)

Video Cable (Not supplied)

Camcorder

Each external input source device has a different back panel configuration. When connecting an external device, match the color of the connection terminal to the cable.

Audio Cable (Not supplied)

Connecting a DVD Player

The rear panel jacks on your TV make it easy to connect a DVD player to your TV.

DVD Player Rear Panel

Audio Cable (Not supplied)

Component Cable (Not supplied)

TV Rear Panel

1. Connect a Video Cable (or S-Video Cable )between the AV IN2 [VIDEO] (or S-VIDEO) jack on the TV and the VIDEO OUT jack on the camcorder.

2. Connect Audio Cables between the AV IN2 [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the camcorder.

1. Connect a Component Cable between the COMPONENT IN(1 or 2) [Y, PB, PR] jacks on the TV and the COMPONENT [Y, PB, PR] jacks on the DVD player.

2. Connect Audio Cables between the COMPONENT IN(1 or 2) [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the DVD player.

Component video separates the video into Y (Luminance (brightness)), Pb (Blue) and Pr (Red) for enhanced video quality. Be sure to match the component video and audio connections. For example, if connecting the video cable to COMPONENT IN, connect the audio cable to COMPONENT IN also. Each external input source device has a different back panel configuration. When connecting an external device, match the color of the connection terminal to the cable.

Connecting a DVD Player/Set-Top Box via DVI

This connection can only be made if there is a DVI Output connector on the external device.

DVD Player / Set-Top Box

Audio Cable (Not supplied)

DVI to HDMI Cable (Not supplied)

Each external input source device has a different back panel configuration. When connecting an external device, match the color of the connection terminal to the cable.

TV Rear Panel

1. Connect a DVI to HDMI Cable or DVI-HDMI Adapter between the HDMI/DVI IN connector on the TV and the DVI connector on the DVD player/Set-Top Box.

2. Connect Audio Cables between the DVI IN [R-AUDIO-L] jack on the TV and the AUDIO OUT jacks on the DVD player/ Set-Top Box.

English-10

Connecting a DVD Player/Set-Top Box via HDMI

This connection can only be made if there is an HDMI Output connector on the external device.

DVD Player Rear Panel

HDMI Cable (Not supplied)

What is HDMI?

• HDMI(High-Definition Multimedia Interface), is a next-generation interface that enables the transmission of digital audio and video signals using a single cable without compression.

• “Multimedia interface” is a more accurate name for it especially because it allows multiple channels of digital audio (5.1 channels). The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports multi-channel digital audio.

Each external input source device has a different back panel configuration. When connecting an external device, match the color of the connection terminal to the cabl

TV Rear Panel

1. Connect an HDMI Cable between the HDMI/DVI IN connector on the TV and the HDMI connector on the DVD player/Set-Top Box.

Connecting an Amplifier/DVD Home Theater

TV Rear Panel

Amplifier/DVD Home Theater

Audio Cable (Not supplied)

Each external input source device has a different back panel configuration. When connecting an external device, match the color of the connection terminal to the cable.

1. Connect Audio Cables between the AUDIO OUT [R-AUDIO-L] on the TV and AUDIO IN [R-AUDIO-L] on the Amplifier/DVD Home Theater.

When an audio amplifier is connected to the “AUDIO OUT [L-AUDIO-R]” terminals: Decrease the gain (volume) of the TV, and adjust the volume level with the Amplifier’s volume control.

English-11

Connecting a PC

TV Rear Panel

PC Audio Cable (Not supplied)

D-Sub Cable (Not supplied)

Each external input source device has a different back panel configuration. When connecting an external device, match the color of the connection terminal to the cable.

The HDMI/DVI jacks do not support PC connection.

Internal Speakers

Internal Mute Off

Internal Mute On

Video No Signal

When “Internal mute” is set to “On”, Sound menus except “MTS” cannot be adjusted.

Speaker Output

Mute

AV, S-Video

Speaker Output

Mute

Component, PC, HDMI

Speaker Output

Mute

Sound Output

Mute

1. Connect a D-Sub Cable between PC IN [PC] connector on the TV and the PC output connector on your computer.

2. Connect a PC Audio Cable between PC IN [AUDIO] jack on the TV and the Audio Out jack of the sound card on your computer.

Audio Out (L/R Out)

AV, S-Video

Sound Output

Mute

Component, PC, HDMI

Sound Output

Mute

English-12

Operation

Turning the TV On and Off

Press the POWER button on the remote control. You can also use the button on the front of the panel.

Plug & Play Feature

When the TV is initially powered on, two basic customer settings proceed automatically and subsequently:

1. Press the POWER button on the remote control. The message “Start Plug & Play” is displayed with “OK” selected.

2. Select the appropriate language by pressing the  or  buttons. Press the ENTER button to confirm your choice.

3. The message “Check antenna input.” is displayed with “OK” selected. Press the ENTER button.

4. Press the  or  buttons to select “Air”, “STD”, “HRC”, or “IRC”, then press the ENTER button.

5. Press the ENTER button to select “Start”. The TV will begin memorizing all of the available channels.

To stop the search before it has finished, press the ENTER button with “Stop” selected.

6. Press the ENTER button. Press the  or  buttons to move to the “Hour”, “Minute” or “am/pm”. Set the “Hour”, “Minute” or “am/pm” by pressing the  or  buttons. Press the ENTER button. (Refer to “Setting the Clock”on page 32.)

You can set the Hour and Minute directly by pressing the number buttons on the remote control.

7. The message “Enjoy your watching.” is displayed. When you have finished, press the ENTER button.

English-13

If you want to reset this feature...

1. Press the MENU button to display the menu. Press the  or  button to select “Setup”, then press the ENTER button.

2. Press the ENTER button again, to select “Plug & Play”.

3. The message “Start Plug & Play” is displayed.

Changing Channels

Using the Channel Buttons

1. Press the CH or CH button to change channels.

When you press the CH or CH button, the TV changes channels in sequence. You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels). You will not see channels that were either erased or not memorized. See page 16 to memorize channels.

Using the PRE-CH Button to select the Previous Channel

1. Press the PRE-CH button. The TV will switch to the last channel viewed.

To quickly switch between two channels that are far apart, tune to one channel, then use the number button to select the second channel. Then use the alternate between them.

PRE-CH button to quickly

Adjusting the Volume

1. Press the

Using Mute At any time, you can cut off the sound using the MUTE button.

1. Press MUTE button and the sound cuts off. The word “ ” will appear in the lower-left corner of the screen.

2. To turn mute off, press the MUTE button again, or simply press the VOL or VOL

VOL or VOL

buttons to increase or decrease the volume.

buttons.

English-14

Viewing the Display

CAPTION

The display identifies the current channel and the status of certain audio-video settings.

1. Press the INFO button on the remote control.

The TV will display the channel, the type of sound, and the status of certain picture and sound settings.

Press the INFO button once more or wait approximately 10 seconds and it disappears automatically.

Viewing the Menus

1. With the power on, press the MENU button. The main menu appears on the screen. Its left side has five icons: Input, Picture, Sound, Channel, Setup.

2. Use the  or  buttons to select one of the five icons. Then press the ENTER button to access the icon’s sub-menu.

3. Press the EXIT button to exit.

The on-screen menus disappear from the screen after about two minutes.

English-15

Memorizing the Channels

Your TV can memorize and store all of the available channels for both “off-air” (antenna) and “cable” channels. After the available channels are memorized, use the CH or CH buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual).

Selecting the Video Signal-sour

Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an antenna or a cable system).

1. Press the MENU button to display the menu. Press the  or  buttons to select “Channel”, then press the ENTER button.

2. Press the ENTER button. Repeatedly press the  or  buttons to cycle through these choices: “Air”, “STD”, “HRC”, or “IRC” (all cable TV).

Press the

EXIT button to exit.

STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point, the signal source has been selected. Proceed to “Storing Channels Automatically”.

Storing Channels in Memory (Automatic Method)

1. First, select the correct signal source (Air, STD, HRC, or IRC).

2. Press the  or  buttons to select “Auto Program”, then press the ENTER button.

3. Press the ENTER button to select “Start”.

The TV will begin memorizing all of the available channels.

The TV automatically cycles through all of the available channels and stores them in memory. This takes about one to two minutes. Press the interrupt the memorization process and return to the “Channel” menu.

ENTER

button at any time to

4. After all the available channels are stored, the “Channel” menu reappears. Press the EXIT button to exit.

To stop the search before it has finished, press the

ENTER

English-16

button with “Stop” selected.

To Select the Source (depending on the model)

Use to select TV or other external input sources connected to the TV. Use to select the input source of your choice.

1. Press the MENU button to display the menu. Press the ENTER button to select “Input”.

2. Press the ENTER button to select “Source List”. Press the  or  buttons to select signal source, then press the ENTER button.

When you connect equipment to the LCD, you can choose between the following sets of jacks: AV1, Component1, Component2, PC or HDMI on the TV’s rear panel and AV2, S-Video on the TV’s side panel. HDMI input can only be selected when the external device is turned on and connected via HDMI. 26 inch model only supports TV, AV, S-Video, Component1, Component2, PC and HDMI.

You can choose only those external devices that are connected to the TV.

Press the SOURCE button on the remote control to view an external signal source.

You can enter TV or PC mode directly by using the TV or PC button on the remote control.

To Edit the Input Source Name (depending on the model)

Name the device connected to the input jacks to make your input source selection easier.

1. Press the MENU button to display the menu. Press the ENTER button to select “Input”. Press the  or  buttons to select “Edit Name”, then press the ENTER button.

2. Press the  or  buttons to select “AV1”, “AV2”, “S-Video”, “Component1”, “Component2”, “PC” or “HDMI” input jack, then press the ENTER button.

26 inch model only supports TV, AV, S-Video, Component1, Component2, PC and HDMI.

3. Press the  or  buttons to select “VCR”, “DVD”, “D-VHS”, “Cable STB”, “HD STB”, “Satellite STB”, “AV Receiver”, “DVD Receiver”, “Game”, “Camcorder”, “DVD Combo”, “DHR” or “PC” input source, then press the ENTER button. Press the EXIT button to exit.

English-17

Picture Control

Using Automatic Picture Settings

Your TV has four automatic picture settings (“Dynamic”, “Standard”, “Movie”, and “Custom”) that are preset at the factory. You can activate either Dynamic, Standard, Movie, or Custom by making a selection from the menu. Or, you can select “Custom” which automatically recalls your personalized picture settings.

1. Press the MENU button to display the menu. Press the  or  buttons to select “Picture”, then press the ENTER button.

2. Press the ENTER button to select “Mode”. Press the ENTER button again. Press the  or  buttons to select the “Dynamic”, “Standard”, “Movie”, or “Custom” picture setting. Press the ENTER button.

 Choose Dynamic to increase the clarity and sharpness of the picture.  Choose Standard for the standard factory settings.  Choose Movie when watching movies.  Choose Custom if you want to adjust the settings according to personal preference.

When in PC mode, Tint, Sharpness are not available.

3. Press the  or  buttons to select “Contrast”, “Brightness”, “Sharpness”, “Color”, or “Tint”, then press the ENTER button.

4. Press the  or  buttons to decrease or increase the value of a particular item. For example, if you select “Contrast”, pressing the  button increases it. Press the ENTER button.

Press the

• “Tint” doesn’t operate in HDMI, PC or any Component mode.

• Each adjusted setting will be stored separately according to its input mode.

• When you make changes to Contrast, Brightness, Sharpness, Color, Tint , OSD will be

also adjusted accordingly.

EXIT button to exit.

English-18

Adjusting the Color Tone

You can change the color of the entire screen according to your preference.

1. Press the MENU button to display the menu. Press the  or  buttons to select “Picture”, then press the ENTER button.

2. Press the ENTER button to select “Mode”.

3. Press the  or  buttons to select “Color Tone”, then press the ENTER button.

4. Press the  or  buttons to select “Cool2”, “Cool1”, “Normal”, “Warm1”,

or “Warm2”. Press the ENTER button.

Resetting the Picture Settings to the Factory Defaults

1. Press the  or  buttons to select “Reset”, then press the ENTER button.

Press the

EXIT button to exit.

Each mode can be reset.

DNIe Demo (Digital Natural Image engine)

Samsung’s new technology brings you more detailed images with contrast, white enhancement and 3D noise reduction. You can see how DNIe improves the picture by setting DNIe demo mode to On.

1. Press the MENU button to display the menu. Press the  or  buttons to select “Picture”, then press the ENTER button.

2. Press the  or  buttons to select “DNIe Demo”, then press the ENTER button.

This function doesn’t work when the Input Source is PC.

3. Press the  or  buttons to select “On” or “Off”, then press the ENTER button.

Press the

Press the DNIe button on the remote control repeatedly to select one of the settings.

EXIT button to exit.

• DNIe Demo: Off

DNIe Demo mode is deactivated.

•

DNIe Demo: On The right-hand side of the screen shows the improved DNIe image. The left-hand side of the screen shows the original image.

• The “DNIe Demo” is designed to show the difference between the regular and DNIe pictures.

• By default, the product displays the picture with DNIe applied.

English-19

Changing the Screen Size

Screen size selection depends on the type of video input.

1. Press the MENU button to display the menu.

2. Press the  or  buttons to select “Size”, then press the ENTER button.

3. Press the  or  buttons to select the screen format you want.

•

If you watch a still image or the 4:3 mode for a long time (over 2 hours), an image may be burned onto the screen. View the TV in 16:9 mode as much as possible.

Press the

 or  buttons to select “Picture”, then press the ENTER button.

ENTER button.

EXIT button to exit.

• 16:9 : Sets the picture to 16:9 wide mode.

• Zoom : Magnifies the size of the picture on the screen.

• 4:3 : Sets the picture to 4:3 normal mode.

Alternately, you can press the P.SIZE button on the remote control repeatedly to change

the picture size.

16:9

Sets the picture to 16:9 wide mode.

Zoom

The screen size when Wide screen is vertically enlarged.

4:3

Sets the picture to 4:3 normal mode.

1. In TV, VIDEO, S-VIDEO,and all COMPONENT (480i, 480p) modes, all screen modes can be selected.

(16:9 •Zoom •4:3)

2. In PC, HDMI (720p, 1080i), COMPONENT (720p, 1080i) modes, only 16:9 & 4:3 modes can be selected.

3. You must select Zoom with P. Size button on the remote control (not in the OSD menu) if you want to move the

Zoom picture up or down.

4. If you change the picture size when PIP is On, PIP will automatically be turned Off.

English-20

Freezing the Picture

CAPTION

1. Press the STILL button to freeze a moving picture.

Normal sound will still be heard. Press again to cancel.

Viewing Picture-in-Picture

This product has one built-in tuner, which does not allow PIP to function in the same mode. For example, you cannot watch one TV channel in the main screen, and a different one in the PIP screen. Please see ‘PIP Settings’below for details. You can use the PIP feature to simultaneously watch two video sources.

Activating Picture-in-Pictur

1. Press the MENU button to display the menu. Press the  or  buttons to select “Picture”, then press the ENTER button. Press the  or  buttons to select “PIP”, then press the ENTER button.

2. Press the ENTER button again. Press the  or  buttons to select “On”, then press the ENTER button.

If you turn the TV off while watching in PIP mode and turn it on again, the PIP window will disappear.

Alternately, you can press the PIP button on the remote control repeatedly to activate or deactivate the PIP.

PIP Settings

Sub

Picture

Main Picture

AV 1,2

S-Video

Component1,2

HDMI

TV AV 1,2 S-Video

This TV has only one tuner and does not allow you to watch one TV channel in the main screen and another channel in PIP screen.

O: PIP operates / X: PIP doesn’t operate

Component1,2 PC

HDMI

continued..

English-21

Selecting a Signal Source (External A/V) for PIP.

3. Press the  or  buttons to select “Source”, then press the ENTER button. Select the source of the sub picture (PIP) by pressing the  or  buttons and press the ENTER button.

The sub picture can serve different source selections based on what the main picture is set to.

Press the SOURCE button on the remote control to select a signal from an external source PIP.

Swapping the Contents of the PIP and Main image

4. Press the  or  buttons to select “Swap”, then press the ENTER button.

SWAP is available in HDMI mode only.

Changing the PIP Channel

5. Press the  or  buttons to select “Channel”, then press the ENTER button. Press the  or  buttons to select the desired channel in the PIP window.

Press the

The channel can be active when the sub picture is set to TV.

ENTER buttons.

Changing the Position of the PIP Window

Changing the Size of the PIP Window

Press the CH buttons on the remote control to change the channels in the PIP screen.

6. Press the  or  buttons to select “Position”, then press the ENTER button. Press the  or  buttons to select the desired PIP window position.

Press the

Press the POSITION button on the remote control to

ENTER buttons.

The Double ( ), Double Wide ( ) mode cannot be selected in Position mode.

change the position of the PIP screen.

7. Press the  or  buttons to select “Size”, then press the ENTER button. Press the

 or  buttons to select the desired size of the PIP window.

Press the ENTER button.

Press the

EXIT button to exit.

If main picture is in PC mode, Size is not available.

• You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke.

• You can adjust picture position only by using the size menu.

English-22

Sound Control

Customizing the Sound

The sound settings can be adjusted to suit your personal preference. (Alternatively, you can use one of the “automatic” settings.)

1. Press the MENU button to display the menu. Press the  or  buttons to select “Sound”, then press the ENTER button.

2. Press the  or  buttons to select “Equalizer”, then press the ENTER button.

3. Press the  or  buttons to select a particular frequency to adjust.

Press the  or  buttons to increase or decrease the level of the particular frequency. Press the

Press the

Using Automatic Sound Settings

Your TV has automatic sound settings (“Standard”, “Music”, “Movie”, “Speech”, and “Custom”) that are preset at the factory. Or, you can select “Custom”, which automatically recalls your personalized sound settings.

1. Press the MENU button to display the menu. Press the  or  buttons to select “Sound”, then press the ENTER button.

2. Press the ENTER button to select “Mode”. Press the  or  buttons to select “Standard”, “Music”, “Movie”, “Speech”, or “Custom” sound setting, then press the ENTER button.

Press the EXIT button to exit.

ENTER button.

EXIT button to exit.

• L/R Sound Balance Adjustment: To adjust the sound balance of the L/R speakers.

Bandwidth Adjustment (100, 300, 1K, 3K, 10K)

• : To adjust the level of different bandwidth frequencies.

• Choose Standard for the standard factory settings.

• Choose

Music when watching music videos or concerts.

• Choose

Movie when watching movies.

• Choose

Speech when watching a show that is mostly dialog (i.e., news).

• Choose

Custom to recall your personalized settings (see “Customizing the Sound”).

Press the S.MODE button on the remote control to select one of the standard sound settings.

Setting the TruSurround XT

TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats.

1. Press the MENU button to display the menu. Press the  or  buttons to select “Sound”, then press the ENTER button.

2. Press the  or  buttons to select “SRS TSXT”, then press the ENTER button.

3. Press the  or  buttons to select “On” or “Off”, then press the ENTER button.

Press the

TRADEMARK & LABEL LICENSE NOTICE

EXIT button to exit.

TruSurround XT, SRS and Symbol are

trademarks of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc.

English-23

Choosing a Multi-Channel Sound (MTS) track

Multi-Track Sound

1. Press the MENU button to display the menu. Press the  or  buttons to select “Sound”, then press the ENTER button.

2. Press the  or  buttons to select “MTS”, then press the ENTER button.

3. Press the  or  buttons to select a setting you want, then press the ENTER button.

Press the

Press the MTS buttons on the remote control repeatedly to select “Mono”, “Stereo”, or “SAP”.

EXIT button to exit.

• Choose Mono for channels that are broadcasting in mono, or if you are having difficulty receiving a stereo signal.

• Choose

Stereo for channels that are broadcasting in stereo.

• Choose

SAP to listen to the Separate Audio Program, which is usually a foreign-language

translation.

Automatic Volume Control

Reduces the differences in volume level among broadcasters.

1. Press the MENU button to display the menu. Press the  or  buttons to select “Sound”, then press the ENTER button.

2. Press the  or  buttons to select “Auto Volume”, then press the ENTER button.

3. Press the  or  buttons to set Auto Volume “On” or “Off” then press the

ENTER button.

Press the

EXIT button to exit.

Selecting the Internal Mute

Sound output from the TV speakers is muted. This is useful when you want to listen to audio through your sound system instead of the TV.

1. Press the MENU button to display the menu. Press the  or  buttons to select “Sound”, then press the ENTER button.

2. Press the  or  buttons to select “Internal Mute”, then press the ENTER button.

3. Press the  or  buttons to select “On” or “Off”, then press the ENTER button.

Press the

When “Internal Mute” is set to “On”, the Sound menus except for “Sound Select” (in PIP mode) and MTS cannot be adjusted.

The VOL , VOL and MUTE buttons do not operate when the Internal Mute is set to On.

EXIT button to exit.

English-24

Listening to the Sound of the Sub (PIP) Picture

When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture.

1. Press the MENU button to display the menu. Press the  or  buttons to select “Sound”, then press the ENTER button.

2. Press the  or  buttons to select “Sound Select”, then press the ENTER button.

3. Press the  or  buttons to select “Main” or “Sub”, then press the ENTER button.

Press the

You can select this option when “PIP” is set to “On”.

EXIT button to exit.

 Main: Used to listen to the sound of the main picture.  Sub: Used to listen to the sound of the sub picture.

Resetting the Sound Settings to the Factory Defaults

If Game Mode is On, the Reset Sound function is activated. Selecting the Reset function after setting the equalizer resets the equalizer setting to the factory defaults.

1. Press the MENU button to display the menu. Press the  or  button to select “Sound”, then press the ENTER button.

2. Press the  or  button to select “Reset” then press the ENTER button.

3. Press the EXIT button to exit.

Connecting headphones

You can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room.

When you insert the head set jack into the corresponding port, you can operate only “Internal Mute” and “Sound Select” (in PIP mode) in Sound menu.

Prolonged use of headphones at a high volume may damage your hearing.

You will not receive sound from the speakers when you connect headphones to the system.

English-25



Channel Control

Setting the Channel Manager

You can add or delete a channel so only channels you want are displayed.

1. Press the MENU button to display the menu. Press the  or  buttons to select “Channel”, then press the ENTER button.

2. Press the  or  buttons to select “Channel Manager”, then press the ENTER button.

3. Press the ENTER button again, to select “Channel Manager”.

4. Press the  button to select “ ” line.

5. Press the  or  button to select the undesired channel,

then press the ENTER button to cancel.

6. Repeat steps 5 for each channel to be selected or canceled.

7. Press the EXIT button to exit.

“ ” is active when “Child Lock” is selected to “On”.

Press the CH MGR button on the remote control.

English-26

Activating the Child Lock



This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programmes by muting out video and audio. Child Lock cannot be released using the buttons on the side. Only the remote control can release the Child Lock setting, so keep the remote control away from children.

1. Press the MENU button to display the menu. Press the  or  button to select “Channel”, then press the

2. Press the  or  button to select “Channel Manager”, then press the ENTER button.

3. Press the  or  button to select “Child Lock”, then press the ENTER button.

4. Press the  or  button to select “On”. Press the ENTER button.

5. Press the  or  button to select “Channel Manager”, then press the

ENTER button.

6. Press the  button to select “ ” line.

7. Press the  or  button to select the channels you want to lock, then press the

ENTER button.

8. Repeat steps 7 for each channel to be locked or unlocked.

9. Press the EXIT button to exit.

Select “On” or “Off” in “Child Lock” to easily turn the channels which

selected on “ ” to be active or inactive.

ENTER button.

English-27

Fine Tuning Analog Channels

Use fine tuning to manually adjust a particular channel for optimal reception.

1. Press the MENU button to display the menu. Press the  or  buttons to select “Channel”, then press the ENTER button.

2. Press the  or  buttons to select “Fine Tune”, then press the ENTER button.

3. Press the  or  buttons to adjust the fine tuning.

To store the fine tuning setting in the TV’s memory, press the ENTER button.

If you do not store the fine-tuned channel in memory, adjustments are not saved.

4. To reset the fine tuning setting, press the  button to select “Reset”, then press the ENTER button.

Press the

EXIT button to exit.

Only analog TV channels can be fine tuned. ”*” will appear next to the name of fine-tuned channels.

English-28

+ 101 hidden pages