Samsung LE37C579, LE37C570, LE46C579, LE46C570, LE32C579 User Manual

...

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Country

ARMENIA 0-800-05-555 -

AUSTRIA 0810 - SAMSUNG (7267864, € 0.07/min) www.samsung.com/at

AZERBAIJAN 088-55-55-555 -

BELARUS 810-800-500-55-500 -

BELGIUM 02-201-24-18

CZECH

DENMARK 70 70 19 70   800-7267 www.samsung.com FINLAND   FRANCE  www.samsung.com/fr

GERMANY 01805 - SAMSUNG(726-7864 € 0,14/Min) www.samsung.com/de  8-800-555-555 -

HUNGARY 06-80-SAMSUNG(726-7864) www.samsung.com/hu

EIRE 0818 717100 www.samsung.com/ie

ITALIA 800-SAMSUNG(726-7864) www.samsung.com/lit

KAZAKHSTAN 8-10-800-500-55-500 -

KYRGYZSTAN 00-800-500-55-500 www.samsung.com

LATVIA 8000-7267 www.samsung.com

LITHUANIA 8-800-77777 www.samsung.com LUXEMBURG  www.samsung.com/lu  00-800-500-55-500 -

NETHERLANDS 0900-SAMSUNG (0900-7267864) (€ 0,10/Min) www.samsung.com/nl

 815-56 480 www.samsung.com/no



 80820-SAMSUNG(726-7864) www.samsung.com RUSSIA 8-800-555-55-55   0800-SAMSUNG(726-7864) www.samsung.com/es  902 - 1 - SAMSUNG (902 172 678) www.samsung.com/se  0771 726 7864 (SAMSUNG) www.samsung.com

 0848 - SAMSUNG(7267864, CHF 0.08/min)

TADJIKISTAN 8-10-800-500-55-500 www.samsung.com U.K 0845 SAMSUNG (7267864) 

UKRAINE 0-800-502-000

UZBEKISTAN 8-10-800-500-55-500 www.samsung.com

Customer Care Centre

800 - SAMSUNG (800-726786) www.samsung.com/cz



0 801 1SAMSUNG(172678)



Web Site

www.samsung.com/be (Dutch) www.samsung.com/be_fr (French)

www.samsung.com/pl

www.samsung.com/ch www.samsung.com/ch_fr/(French)

www.samsung.ua www.samsung.com/ua_ru

LCD TV user manual

LCD TV

user manual

imagine the possibilities

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/register

Model _____________ Serial No. _____________

BN68-02791D-00

English

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and speciﬁcations may be changed without notice.

Digital TV notice

1. Functionalities related to Digital TV (DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC) digital terrestrial signals are

broadcasted or where you are able to access to a compatible DVB-C (MPEG2 and MPEG4 AAC) cable-TV service. Please check with your local dealer the possibility to receive DVB-T or DVB-C signal.

2. DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB-C is that for the broadcast

transmission of digital TV over cable. However, some differentiated features like EPG (Electric Programme Guide), VOD (Video On Demand) and so on, are not included in this speciﬁcation. So, they cannot be workable at this moment.

3. Although this TV set meets the latest DVB-T and DVB-C standards, as of [August, 2008], the compatibility with future DVB-T digital terrestrial and

DVB-C digital cable broadcasts cannot be guaranteed.

4. Depending on the countries/areas where this TV set is used some cable-TV providers may charge an additional fee for such a service and you may

be required to agree to terms and conditions of their business.

5. Some Digital TV functions might be unavailable in some countries or regions and DVB-C might not work correctly with some cable service providers.

6. For more information, please contact your local Samsung customer care centre.

The reception quality of TV may be affected due to differences in broadcasting method between the countries. Please check the TV performance in

✎

the local SAMSUNG Authorized Dealer, or the Samsung Call Centre whether it can be improved by reconﬁguring TV setting or not.

Still image warning

Avoid displaying still images (like jpeg picture ﬁles) or still image element (like TV programme logo, panorama or 4:3 image format, stock or news bar at screen bottom etc.) on the screen. Constant displaying of still picture can cause ghosting of LCD screen, which will affect image quality. To reduce risk of this effect, please follow below recommendations:

Avoid displaying the same TV channel for long periods.• Always try do display any image on full screen, use TV set picture format menu for best possible match.• Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout process.• Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.•

Securing the Installation Space

Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation. Failing to do so may result in ﬁre or a problem with the product due to an increase in the internal temperature of the product.

When using a stand or wall-mount, use parts provided by Samsung Electronics only.

✎

If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.

The appearance may differ depending on the product.

✎

Installation with a stand. Installation with a wall-mount.

10 cm

Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems)

This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government ofﬁce, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery return systems)

This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment. To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.

10 cm

English

Contents

Getting Started

Connections

Basic Features

Advanced Features

4 Accessories 4 Viewing the Control Panel 5 Viewing the Remote Control 6 Connecting to an Antenna 6 Plug & Play (Initial Setup)

7 Connecting to an AV Device 8 Connecting to an Audio Device 9 Changing the Input Source

9 How to Navigate Menus 10 Using the INFO button (Now & Next guide) 10 Planning Your Viewing 12 Channel Menu 14 Picture Menu 17 Sound Menu 19 Setup Menu 21 Support Menu

23 Connecting to a PC 24 Network Connection 29 Media Play 36 Anynet+ 39 AllShare

Other Information

This function can be used by

pressing the TOOLS button on the

remote control.

41 Analogue Channel Teletext Feature 42 Installing the Wall Mount 43 Assembling the Cables 44 Anti-Theft Kensington Lock 44 Securing the TV to the Wall 45 Troubleshooting 48 Speciﬁcations 49 Index

Check the Symbol!

Note One-Touch Button

English

Getting Started

6 5 4 37 2 1

Accessories

Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.

✎

The items’ colours and shapes may vary depending on the models.

✎

Remote Control & Batteries (AAA x 2) y Owner’s Instructions y Warranty Card / Safety Guide (Not available in some locations) y

Blanking Bracket y Cable tie y Holder-Ring (4ea) y

See separate guide for installing the stand.

Stand (1EA) y Guide Stand (1EA) y Screws (9EA) y

Viewing the Control Panel

Cleaning Cloth y Power Cord y

(46 inch TV)

(M4 X L12)

The product colour and shape may vary depending on the model.

✎

Power IndicatorRemote control sensor

Speakers

(Power)

Power Indicator Blinks and turns off when the power is on and lights up in standby mode.

SOURCE

MENU Displays an on-screen menu, the OSD (on screen display), of your TV’s features.

Remote control sensor Aim the remote control towards this spot on the TV.

Standby mode

Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.

Turns the TV on or off.

Toggles between all the available input sources. In the on-screen menu, use this button as you would use the ENTERE button on the remote control.

Adjusts the volume. In the OSD, use the Y buttons as you would use the ◄ and ► buttons on the remote control.

Changes the channels. In the OSD, use the z buttons as you would use the ▼ and ▲ buttons on the remote control.

01 Getting Started

English

Viewing the Remote Control

ABCD

HDMI

P . MODE S.MODE DUAL

I-II

SUBT.

SOURCE

MEDIA.P GUIDE

CH LIST

This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel, Volume,

✎

STOP, and PLAY/PAUSE buttons.

Turns the TV on and off. (P. 6)

Selects the HDMI mode directly.

Press to directly access to channels.

Alternately select Teletext ON, Double,

Displays the main on-screen menu.

Views Media Play. (P. 29)

Quickly selects frequently used functions.

Selects on-screen menu items and change

Returns to the previous menu.

Buttons in the Channel list, Internet@TV,

Use these buttons in the Media Play and

(�: controls recording on Samsung recorders

Media Play menu, etc.

Anynet+ modes. (P. 29, 36)

with the Anynet+ feature)

Mix or OFF.

Adjusts the volume.

(P. 9)

menu values.

Displays and selects the available video sources. (P. 9)

Returns to the previous channel.

Cuts off the sound temporarily.

Changes channels.

Displays channel list on the screen. (P. 14)

Displays the EPG (Electronic Programme Guide). (P. 10)

Displays information on the TV screen. (P. 10)

Exits the menu. (P. 9)

P.MODE: Selects picture mode. (P. 14) S.MODE: Selects the sound mode. (P. 16) DUAL I-II: Selects sound mode. (P. 18)

: Audio Description selection. (Not available in

some locations) (P. 18)

P.SIZE: Choose the picture size. (P. 16) SUBT.: Digital subtitle display (P. 20)

Installing batteries (Battery size: AAA)

NOTE

✎

Use the remote control within 23 feet from the TV.

Bright light may affect the performance of the remote

control. Avoid using nearby special fluorescent light or neon signs.

The colour and shape may vary depending on the model.

Getting Started

Connecting to an Antenna

When the TV is initially powered on, basic settings proceed automatically.

✎

Preset: Connecting the mains and antenna.

VHF/UHF Antenna

Power Input

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in conﬁguring basic settings. Press the

POWERP button. Plug & Play is available only when the Input source is set to TV.

✎

To return to the previous step, press the red button.

Selecting a language

Selecting Store Demo

or Home Use

Selecting a country

Selecting an antenna

Selecting a channel

Setting the Clock

Mode Viewing the HD

Connection Guide. Enjoy your TV.

Press the ▲ or ▼ button, then press the ENTER Select the desired OSD (On Screen Display) language. Press the ◄ or ► button, then press the ENTER

Select the

y Home Use mode. Store Demo Mode is for retail

environments. Return the unit’s settings from

y Store Demo to Home Use

(standard): Press the volume button on the TV. When the OSD

volume is displayed, press and hold MENU for 5 sec. Press the ▲ or ▼ button, then press the ENTERE button. Select the appropriate country. If the desired country does not exist on the menu, select

Others.

After selecting the country in the Country menu, some models may proceed with an

✎

additional option to setup the pin number.

When you input the PIN number,

✎

Press the ▲ or ▼ button, then press the ENTER Select Air or Cable. Press the ▲ or ▼ button, then press the ENTERE button. Select the channel source to memorise. When setting the antenna source to Cable, a step

appears allowing you to assign numerical values (channel frequencies) to the channels. For more information, refer to Channel → Auto Store. (P. 12)

Press the

✎

Set the Clock Mode automatically or manually. Press the ▲ or ▼ button to select Auto, then press the ENTER The connection method for the best HD screen quality is displayed.

Press the ENTERE button.

ENTERE button at any time to interrupt the memorisation process.

0-0-0-0 is not available.

button.

Cable

ANT OUT

button.

If You Want to Reset This Feature...

Select Setup - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.” If you want to change the PIN number, use the Change PIN function.

English

Connections

W R

WW W B GRRY

R-AUDIO-L

R PB Y

RW RW

RBG

R PB Y

R-AUDIO-L

R PB Y

R-AUDIO-L

R PB Y

WW W B GRRY

Connecting to an AV Device

Using an HDMI / DVI Cable: HD connection (up to 1080p)

Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver, cable box, satellite receiver (STB)

DVD

02 Connections

Red White

HDMI IN 1(DVI), 2, 3, 4 / PC/DVI ✎AUDIO IN

When using an HDMI/DVI cable connection, you must use the

HDMI IN 1(DVI) jack. For the DVI cable

connection, use a DVI to HDMI cable or DVI-HDMI (DVI to HDMI) adapter for video connection and the DVI

AUDIO IN jacks for audio.

If an external device such as a DVD / Blu-ray player / cable box /

STB satellite receiver supporting a HDMI versions older than 1.3 is connected, the TV may operate abnormally (e.g. no screen display / no sound / annoying flicker / abnormal colour).

If there is no sound after connecting an HDMI cable, check the HDMI version of the external device. If you

suspect the version is older than 1.3, contact the provider of the device to confirm the HDMI version and request an upgrade.

is recommended you purchase an HDMI-certified cable. Otherwise, the screen may appear blank or a

connection error may occur.

Using a Component (up to 1080p) or Audio / Video (480i only) Cable and Using a Scart Cable

Available devices: VCR, DVD, Blu-ray player, cable box, STB satellite receiver

HDMI OUT

AUDIO OUT

DVI OUT

Yellow Red White

AUDIO OUT

✎

Ext. mode, DTV Out supports MPEG SD Video and Audio only.

To obtain the best picture quality, the Component connection is recommended over the A/V connection.

✎

VIDEO OUT

Blu-ray player DVDVCR

AUDIO OUT

COMPONENT OUT

Red Blue Green

EXT

English

Connections

Connecting to an Audio Device

Using an Optical or Audio Cable Connection

Available devices: digital audio system, ampliﬁer, DVD home theatre

Digital Audio

Headphone

✎

DIGITAL AUDIO OUT (OPTICAL)

When a digital audio system is connected to the xDIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume of both the TV and the system.

5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.

When the receiver (home theatre) is set to on, you can hear sound output from the TV’s xoptical jack. When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theatre receiver. When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the home theatre receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theatre.

Headphones ✎H: You can connect your headphones to the headphones output on your set. While the headphones are connected, the sound from the built-in speakers will be disabled.

Sound function may be restricted when connecting headphones to the TV.

Headphone volume and TV volume are adjusted separately.

OPTICAL

System

CONNECTIONS COMMON INTERFACE Slot

To watch paid channels, the “CI or CI+ CARD” must be inserted.

If you don’t insert the “CI or CI+ CARD,” some channels will y display the message “Scrambled Signal”.

The pairing information containing a telephone number, the “CI or y CI+ CARD” ID the Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider.

When the conﬁguration of channel information has ﬁnished, the y message “Updating Completed” is displayed, indicating the channel list is updated.

NOTE

✎

You must obtain a “CI or CI+ CARD” from a local cable service provider.

When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may

cause damage to it. Insert the “CI or CI+ CARD” in the direction marked on the card.

The location of the xCOMMON INTERFACE slot may be different depending on the model. “CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer.

If you have any problems, please contact a service provider.

When you are watching the satellite TV, remove the “CI or CI+ CARD” of terrestrial and cable. The screen will be

distorted or will not be seen.

English

02 Connections

Changing the Input Source

POWER

SOURCE

CH LIST

SOURC

MEDIA.P

UID

H LIST

Source List

Use to select TV or other external input sources such as DVD / Blu-ray players / cable box / STB satellite receiver connected to the TV.

TV / Ext. / AV / Component / PC ■ / HDMI1/DVI / HDMI2 / HDMI3 / HDMI4 / USB

In the ✎Source List, connected inputs will be highlighted.

Ext. ✎and PC always stay activated.

Basic Features

Edit Name

VCR / DVD / Cable STB / Satellite STB / PVR STB / ■ AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name

the device connected to the input jacks to make your input source selection easier.

When a PC with a resolution of 1920 x 1080 @

✎

60Hz is connected to the HDMI IN 1(DVI) port, you should set to DVI PC mode under Edit Name.

When connecting an HDMI/DVI cable to the ✎HDMI

IN 1(DVI) port, you should set to DVI PC or DVI

Devices mode under Edit Name.

How to Navigate Menus

Before using the TV, follow the steps below to learn how to navigate the menu and select and adjust different functions.

1 MENU button: Displays the main on-screen menu. 2 ENTERE / Direction button: Move the cursor and

select an item. Conﬁrm the setting.

3 RETURN button: Returns to the previous menu. 4 EXIT button: Exits the on-screen menu.

How to Operate the OSD (On Screen Display)

The access step may differ depending on the selected menu.

▲ / ▼ Select an icon with the ▲ or ▼

ENTER

▲ / ▼

◄ / ►

ENTER

EXIT

The main menu options appears on

the screen:

Picture, Sound, Channel, Setup, Input, Application, Support.

button.

Press ENTERE to access the submenu.

Select the desired submenu with the ▲ or ▼ button.

Adjust the value of an item with the ◄ or ► button. The adjustment in the OSD may differ depending on the selected menu.

Press ENTERE to complete the conﬁguration.

Press EXIT.

English

Using the INFO button (Now & Next guide)

HDMI

CH LIST

DTV Air 800 five

Family Affairs 18:00 - 18:30

Drama

Tanya confesses all to a stunned Babs. Conrad is anxious to hear...

18:30 19:15

Today Today

)

Family Affairs

)

Dark Angel

800 800

five five

800 ﬁve

DTV Air 800 five

Home and Away 18:00 - 18:30

Drama

Dani is devastated when scott makes clear his views on marriage...

27 28 800 24 16 6

Discovery DiscoveryH&L five price-drop.tv QVC R4DTT

American Chopper

Programmes resume at 06:00 Home and... No Information QVC Selection No Information

Tine Team

Fiv...

Today 18:00 - 19:00 19:00 - 20:00

)

Family Affairs

)

Dark Angel

800 ﬁve

The display identiﬁes the current channel and the status of certain audio-video settings.

The Now & Next guide shows daily TV programme information for each channel according to the broadcasting time.

Scroll y ◄, ► to view information for a desired programme while watching the current channel.

Scroll y ▲, ▼ to view information for other channels. If you want to move to the currently selected channel, press the ENTERE button.

abc1

DTV Air

Life On Venus Avenue

Unclassified No Detaild In formation

18:00 ~ 6:00

18:11 Thu 6 Jan

EWatch ' Information

Planning Your Viewing

Guide

The EPG (Electronic Programme Guide) information is provided by broadcasters. Using programme schedules provided by broadcasters, you can specify programmes you want to watch in advance so that the channel automatically changes to the selected programme channel at the speciﬁed time. Programme entries may appear blank or out of date depending on a channel status.

Using Channel View

Guide

2:10 Tue 1 Jun

Using Scheduled View

Guide

Scheduled View

View Mode

2:10 Tue 1 Jun

Information

Cancel

1 4 6

1 Red (View Mode): View the list of programmes that

are playing now or coming up.

2 Yellow (+24 hours): Viewing the list of programmes to

be broadcasted after 24 hours.

3 Blue (Ch.Mode): Select the type of channels you want

to display on the Channel View window.

The ✎ Ch. Mode differs according to the antenna source.

4 (Information): Displays details of the selected

programme.

5 (Page): Moves to the previous / next page. 6 ENTERE button

When selecting the current programme, you can – watch the selected programme.

When selecting the future programme, you can – reserve to watch the selected programme. To cancel the schedule, press the ENTERE button again and select Cancel Schedules.

Channel View - TV

View Mode

+24 Hours Ch. Mode

1 2 3 4 5 6

Information k Page

Watch

English

03 Basic Features

Channel Manager

c 1 1futech c 2 * 24ore.tv

15 abc1

3 BBC World 23 bid-up.tv 33 Boonerang 32 Cartoon Nwk

5 Class News 4 Coming Soon 27 Discovery

All

Radio Data/Other Analogue

1 1futech 2 * 24ore.tv

15 abc1

3 BBC World 23 bid-up.tv 33 Boonerang 32 Cartoon Nwk

5 Class News 4 \ Coming Soon 27 Discovery

All

Radio Data/Other Analogue

Add / delete or set favourites channels and use the programme guide for digital broadcasts. Select a channel in the Channels, My Channels, Satellite or Scheduled screen.

Channels

Air Antena B Zoom Select k Page T Tools

■ Channels: Shows the channel list according to

■

My Channels: Shows the group of the channel.

■ Satellite: Shows the channel list according to

■ Scheduled: Shows all the currently reserved

Using the colour buttons with the ✎Channel Manager

Red (Antenna): Toggle among Air or Cable.

Green (Zoom): Enlarges or shrinks a channel

number.

Yellow (Select): Select desired channels and press

the Yellow button to set all the selected channels at the same time. The c mark appears to the left of the selected channels.

(Page): Move to next or previous page.

T x (Tools): Displays the Channel Manager option

menu. (The Options menus may differ depending on the situation.)

Channel Status Display Icons

channel type.

satellite signal.

programmes.

Using ¦ Favourite Channels

My Channels

(in Channel Manager) Shows all favourite channels.

Edit My Channels ■ channels to desired my channels group.

The “

✎ *

” symbol will be displayed and the channel will

be set as a my channel.

1. Select a channel and press the TOOLS button.

2. Add or delete a channel in the my channel groups

you want among 1, 2, 3 and 4.

One or more groups can be selected.

3. After you have changed the settings, the channel list for each group can be viewed in My Channels.

Channels

Air Antena B Zoom Select k Page T Tools

: You can set the selected

Edit My Channels

Lock

Timer Viewing

Edit Channel Name

Sort

Delete

Icons Operations

An Analogue channel.

(

)

A channel selected. A channel set as a Favourite.

A programme currently being broadcast. A locked channel.

A reserved programme.

English

Basic Features

Channel Menu

¦ Retuning channels

Antenna (Air / Cable / Satellite)

Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system). Country The PIN input screen appears. Enter your 4 digit PIN number.

Digital Channel ■ : Change the country for digital channels.

Analogue Channel ■ : Change the country for analogue channels.

Auto Store

Scans for a channel automatically and stores in the TV.

Automatically allocated programme numbers may not

✎

correspond to actual or desired programme numbers. If a channel is locked using the Child Lock function, the PIN input window appears.

When Antenna Source is set to Air or Cable:

Antenna Source (Air / Cable / Satellite ) ■ : Select the

antenna source to memorise.

Channel Source (Digital & Analogue / Digital / ■ Analogue): Select the channel source to memorise.

When selecting Cable → Digital & Analogue or Digital: Provide a value to scan for cable channels.

Search Mode (Full / Network / Quick): Scans for all channels with active broadcast stations and stores them in the TV.

If you set ✎Quick, you can set up Network,

Network ID, Frequency, Modulation, Symbol Rate manually by press the button on the remote

control.

Network (Auto / Manual): Selects the Network ID setting mode among Auto or Manual.

Network ID: When Network is Manual, you can set up Network ID using the numeric buttons.

Frequency: Displays the frequency for the channel.

(differs in each country)

Modulation: Displays available modulation values. Symbol Rate: Displays available symbol rates.

Manual Store

Scans for a channel manually and stores in the TV.

If a channel is locked using the ✎Child Lock function, the PIN input window appears.

When Antenna Source is set to Air or Cable:

Digital Channel (Channel, Frequency, Bandwidth) ■ :

(available in DTV mode) When scanning has finished, channels are updated in the channel list.

Analogue Channel (Programme, Colour System, ■ Sound System, Channel, Search, Store): If there

is abnormal sound or no sound, reselect the sound standard required.

Channel mode

✎

P x (programme mode): When tuning is complete,

the broadcasting stations in your area have been assigned to position numbers from P0 to P99. You can select a channel by entering the position number in this mode.

C x (aerial channel mode) / S (cable channel mode):

These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel.

When Antenna Source is set to Satellite:

Satellite ■ : Selects the satellite using the up/down

buttons. Transponder ■ : Selects the transponder using the up/

down buttons. Scan ■ Mode (All Channels / Free Channels Only):

Selects either free or all channels to store. Network Search (Disable / Enable ■ ): Enable / Disable

network search using the up/down buttons. Signal ■ Quality: Display the current status of

broadcasting signal.

Information on a satellite and its transponder is subject

✎

to change depending on the broadcasting conditions. When ✎ setting is completed, move to Search and press

the ENTEREE button. Channel scan is started.

When Antenna Source is set to Satellite:

Channel Type (All / TV / Radio): ■ Select the Channel

type to memorise.

Satellite (All / Astra 19.2E): ■ Selects the satellite to scan. Scan Mode (All Channels / Free Channels Only): ■

Selects the scanning mode of the selected satellite.

English

03 Basic Features

Satellite System Setup

The PIN input screen appears. Enter your 4 digit PIN number.

Satellite System Setup is available when Antenna is set to Satellite. Before running Auto Store, set Satellite System Setup. Then channel scan is run normally.

Satellite Selection ■ : You can choose the satellites for

this TV. LNB Power (Off / On) ■ : Enables or disables the power

supply for the LNB.

LNB Settings ■ : Conﬁgures the outdoor equipment. Satellite: Selects the satellite for receiving digital

broadcasts. Transponder: Selects a transponder from the list or adds a new transponder. DiSEqC Mode: Selects DiSEqC mode for the selected LNB. Lower LNB Oscillators: Sets the LNB oscillators to a lower frequency. Upper LNB Oscillators: Sets the LNB oscillators to a higher frequency. Tone 22 khz (Off / On / Auto): Selects the Tone 22 kHz depending on the LNB type. For a universal LNB it should be Auto. Signal Quality: Display the current status of broadcasting signal.

Positioner Settings ■ : Conﬁgures the antenna positioner. Positioner (Off / On): Enables or disables the positioned

control. Positioner Type (USALS / DiSEqC 1.2): Sets the positioned type between DiSEqC 1.2 and USALS(Universal Satellite Automatic Location System).

My Longitude – : Sets the longitude for my location. My Latitude – : Sets the latitude for my location. Satellite Longitude Settings – : Sets the longitude of

user deﬁned satellites.

User Mode: Sets the position of satellite antenna according to each satellite. If you store the current position of satellite antenna according to a certain satellite, when the signal of that satellite is needed, the satellite antenna can be moved to pre-populated position.

Satellite – : Selects the satellite to set the position for. Transponder: – Selects a transponder from the list for

signal reception. Moving Mode: – Selects the movement mode between

discrete and continuous movement. Step Size: – Adjusts the step size degrees for the

antenna rotation. Step Size is available when Moving Mode is set to Step.

Go to Stored Position – : Rotates the antenna to the stored satellite position.

Antenna Position – : Adjusts and stores the antenna position for the selected satellite.

Store Current Position – : Stores current position as the selected positioner limit.

Signal Quality – : Display the current status of broadcasting signal.

Installer Mode: Sets limits to the scope of movement of satellite antenna or reset the position. Generally, installation guide uses this function.

Limit Position (East / West) – : Selects the direction of the positioner Limit.

Antenna Position: – Adjusts and stores the antenna position for the selected satellite.

Store Current Position: – Stores the current position as the selected positioner Limit.

Go to Zero – : Moves the antenna to the reference position.

Reset Positioner Limit – : Allows the antenna to rotate over the full arc.

Reset All Setting (OK / Cancel) ■ : All satellite settings will be reset to the initial values.

¦ Editing channels

Channel Manager Option Menu (in Channel Manager)

1. Select a channel and press the TOOLS button.

2. Edit the channel name or number using the Edit Channel Name or Edit Channel Number menu.

Edit Channel Name ■ (analogue channels only): Assign

your own channel name. Edit Channel Number ■ (digital channels only): Edit the

number by pressing the number buttons desired.

Other Features ¦

Cable Search Option

(depending on the country) Sets additional search options such as the frequency and

symbol rate for a cable network search.

Freq.Start / Freq.Stop ■ : Set the start or stop frequency (differs in each country)

Modulation ■ : Displays available modulation values. Symbol Rate ■ : Displays available symbol rates.

English

Basic Features

CH LIST

POWER

HDMI

P . MODE

SOURCE

CH LIST

Channel Manager Option Menu

(in Channel Manager) Set each channel using the Channel Manager menu options

(Search, Lock / Unlock, Timer Viewing, Delete, Sort, Select All / Deselect All). Option menu items may differ depending on the channel status.

1. Select a channel and press the TOOLS button.

2. Select a function and change its settings.

■ (searched channel only): Set the item (Channel

■ : Lock a channel so that the channel

■ : You can set a desired channel to be

■ (analogue channels only): This operation allows

■ (when the Antenna was set to Satellite):

■ : You can delete a channel to display the channels

■ : Select all the channels

(in Channel Manager) You can view, modify or delete a a show you have reserved

to watch.

■ : Change a a show you have reserved to

■ : Cancel a show you have reserved

■ : Display a show you have reserved

■ : Select or deselect all reserved

Search Type, Satellite, Provider, Transponder, Mode) in order

to search.

✎

his menu is only supported when Antenna is

Satellite.

Lock / Unlock

cannot be selected and viewed.

✎

NOTE

This function is available only when the xChild Lock is set to On.

The PIN input screen appears. Enter your 4-digit PIN,

the default of which is “0-0-0-0”. Change the PIN using the Change PIN option.

Timer Viewing

displayed automatically at the intended time. Set the current time ﬁrst to use this function.

When a digital channel is selected, press the

✎

button to view the digital Programme.

Sort

you to change the programme numbers of the stored channels. This operation may be necessary after using the auto store.

Reorder

Rearrange the channel list in numerical order.

Delete

you want.

Select All / Deselect All

or deselect all the selected channels in the channel manager.

Scheduled

Change Info

watch.

Cancel Schedules

to watch.

Information

to watch. (You can also change the reservation information.)

Select All / Deselect All

programmes.

►

Channel List

You can see all the channels searched.

Channel List Transfer

Imports or exports the channel map. You should connect a USB storage to use this function.

The PIN number input screen appears. Enter your

✎

4 digit PIN number. The default PIN number of a new TV set is ‘0-0-0-0’.

✎

Import from USB ■ : Import channel list from USB. Export to USB ■ : Export channel list to USB.

Fine Tune

(analogue channels only) If the signal is weak or distorted, ﬁne tune the channel

manually.

Fine tuned channels are marked with an asterisk “*”.

✎

To reset the fine-tuning, select ✎Reset.

Picture Menu

Changing the Preset Picture Mode ¦

Mode

Select your preferred picture type.

Dynamic ■ : Suitable for a bright room. Standard ■ : Suitable for a normal

environment.

Natural

■ : Suitable for reducing eye strain.

✎

Natural

■ : Suitable for watching movies in a dark room.

Movie

is not available in PC mode.

Adjusting picture settings ¦

Backlight / Contrast / Brightness / Sharpness / Colour / Tint (G/R)

Your television has several setting options for picture quality control.

NOTE

✎

In analogue xTV, Ext., AV modes of the PAL system, the Tint (G/R) function is not available.

In PC mode, you can only make changes to

Backlight, Contrast and Brightness. Settings can be adjusted and stored for each

external device connected to the TV. Lowering picture brightness reduces power

consumption.

English

03 Basic Features

Economical Solutions ¦

ECO Solution

■ Energy Saving (Off / Low / Medium / High / Picture Off / Auto)

in order to reduce power consumption. If you select Picture Off, the screen is turned off, but the sound remains on. Press any button except volume button to turn on the screen.

ECO Sensor (Off / On) ■ : To enhance your power savings; the picture settings will automatically adapt to the light in the room.

Min Backlight: When ECO sensor is On, the minimum screen brightness can be adjusted manually.

No Signal Power Off (Off / 15 min / 30 min / 60 min) ■ : Activates the Stand-by mode, in the case of “No Signal” or “Check Signal Cable” status for a certain period of time deﬁned by the user.

Changing the Picture Options ¦

If ✎ you adjust the Backlight, the Eco Sensor will be set to Off.

Eco Sensor ✎ is On, the display brightness may

change (become slightly darker in most cases) depending on the surrounding light intensity.

Disabled when the PC is in power saving mode.

✎

: Adjust the brightness of the TV

Advanced Settings

(available in Standard / Movie mode) You can adjust the detailed setting for the screen including

colour and contrast.

In PC mode, you can only make changes to ✎Dynamic Contrast, Gamma and White Balance.

Advanced Settings

Black Tone : Off ►

Dynamic Contrast : Medium

Shadow Detail : 0

Gamma : 0

Expert Pattern : Off

RGB Only Mode : Off

Colour Space : Native

Black Tone (Off / Dark / Darker / Darkest) ■ : Select the black level to adjust the screen depth.

Dynamic Contrast (Off / Low / Medium / High) ■ : Adjust the screen contrast.

Shadow Detail (-2~+2) ■ : Increase the brightness of dark images.

Disabled under PC mode.

✎

▼

U Move E Enter R Return

Gamma ■ : Adjust the primary colour intensity. Expert Pattern (Off / Pattern 1 / Pattern 2 ■ ): By

running the Expert Pattern function, the picture can be calibrated without a generator or ﬁlter. If the OSD menu disappears or a menu other than the Picture menu is opened, the calibration is saved and the Expert Pattern window disappears.

While the ✎Expert Pattern is running, sound is not outputted.

Only enabled in DTV, Component and HDMI

✎

modes.

■ RGB Only Mode (Off / Red / Green / Blue): You can adjust Colour or Tint of Red, Green or Blue for the picture from an external device (DVD player, home theatre, etc.).

Colour Space (Auto / Native ) ■ : Adjust the range of colours available to create the image.

White Balance ■ : Adjust the colour temperature for a more natural picture.

R-Offset / G-Offset / B-Offset: Adjust each colour’s (red, green, blue) darkness.

R-Gain/G-Gain/B-Gain: Adjust each colour’s (red, green, blue) brightness.

Reset: Resets the White Balance to it’s default settings. 10p White Balance (Off / On) ■ : Controls the white

balance in 10 point interval by adjusting the red, green, and blue brightness.

Available when the picture mode is set to Movie

✎

and when the external input is set to HDMI or Component.

Some external devices may not support this

✎

function.

Interval: Select interval to adjust. Red: Adjust the red level. Green: Adjust the green level. Blue: Adjust the blue level. Reset: Resets the 10p White Balance to its default

settings.

Flesh Tone ■ : Emphasize pink “Flesh Tone.” Edge Enhancement (Off / On) ■ : Emphasize object

boundaries. xvYCC (Off / On) ■ : Setting the xvYCC mode on

increases detail and colour space when watching movies from an external device (e.g. DVD player) connected to the HDMI or Component IN jacks.

Available when the picture mode is set to ✎Movie and when the external input is set to HDMI or Component.

Some external devices may not support this

✎

function.

English

Basic Features

CH LIST

Picture Options

In PC mode, you can only make changes to the ✎Colour

Ton e, Size, Digital Noise Filter and Auto Protection Time.

Picture Options

Colour Tone : Normal ►

Size : Auto Wide

Screen Mode : 16:9

Digital Noise Filter : Auto

MPEG Nosie Filter : Auto

HDMI Black Level : Normal

Film Mode : Off

Colour Tone (Cool / Normal / Warm1 / Warm2) ■

Warm1 ✎or Warm2 will be deactivated when the

picture mode is Dynamic. Settings can be adjusted and stored for each

✎

external device connected to an input on the TV.

Size ■ : Your cable box/satellite receiver may have its own set of screen sizes as well. However, we highly recommend you use 16:9 mode most of the time.

Auto Wide: Automatically adjusts the picture size to the 16:9 aspect ratio.

16:9 : Adjusts the picture size to 16:9 for DVDs or wide broadcasting.

Wide Zoom: Magniﬁes the picture size more than 4:3.

Adjusts the Position by using ✎▲, ▼ buttons.

Zoom: Magniﬁes the 16:9 wide pictures vertically to ﬁt the screen size.

Adjusts the Position or Size by using ✎▲, ▼ button.

4:3 : The default setting for a movie or normal broadcasting.

Do not watch in 4:3 format for a long time. Traces

✎

of borders displayed on the left, right and centre of the screen may cause image retention(screen burn) which are not covered by the warranty.

Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are inputted.

NOTE

✎

After selecting xScreen Fit in HDMI (1080i/1080p) or Component (1080i/1080p) mode, you may need to center the picture:

1. Press the ◄ or ► button to select Position.

2. Press the ENTERE button.

3. Press the ▲, ▼, ◄ or ► button to move the

picture.

Depending on the input source, the picture size

options may vary.

▼

U Move E Enter R Return

The available items may differ depending on the

selected mode. In PC mode, only x16:9 and 4:3 modes can be

adjusted. Settings can be adjusted and stored for each

external device connected to an input of the TV. If you use the xScreen Fit function with HDMI 720p

input, 1 line will be cut at the top, bottom, left and right as in the overscan function.

■ Screen Mode (16:9 / Wide Zoom / Zoom / 4:3): Available only when picture size is set to Auto Wide. You can determine the desired picture size at the 4:3 WSS (Wide Screen Service) size or the original size. Each European country requires different picture size.

Not available in PC, Component or HDMI mode.

✎

Digital Noise Filter (Off / Low / Medium / High / Auto ■ / Auto Visualisation): When the broadcast signal is

weak, some static and ghosting may appear. Select one of the options until the best picture is displayed.

Auto Visualisation: When changing analogue channels, displays signal strength.

Only available for analogue channels.

✎

When ✎ bar is green, you are receiving the best possible signal.

MPEG Noise Filter (Off / Low / Medium / High / ■ Auto): Reduces MPEG noise to provide an improved

picture quality.

Disabled under PC mode.

✎

HDMI Black Level (Normal / Low) ■ : Selects the black level on the screen to adjust the screen depth.

Available only in HDMI mode (RGB signals).

✎

Film Mode (Off / Auto1 / Auto2) ■ : Sets the TV to automatically sense and process ﬁlm signals from all sources and adjust the picture for optimum quality.

Available in TV, AV, COMPONENT (480i / 1080i)

✎

and HDMI (480i / 1080i).

Auto Protection Time (2 hours / 4 hours / 8 hours ■ / 10 hours / Off) : If the same image remains on the

screen, Auto Screen Burn Protector will work.

English

03 Basic Features

Picture Reset (OK / Cancel)

HDMI

S.MODE

CH LIST

Resets your current picture mode to its default settings.

Amplify ■ : Increase the intensity of high-frequency sound to allow a better listening experience for the hearing impaired.

Set the input source to PC.

Auto Adjustment

Adjust frequency values/positions and ﬁne tune the settings automatically.

Screen

Using Your TV as a Computer (PC) Display

Setting Up Your PC Software (Based on Windows XP) Depending on the version of Windows and the video card,

the actual screens on your PC may differ in which case the same basic set-up information will almost always be applied. (If not, contact your computer manufacturer or Samsung Dealer.)

1. Click on “Control Panel” on the Windows start menu.

2. Click on “Appearance and Themes” in the “Control

3. Click on “Display” and a display dialog box will appear.

4. Navigate to the “Settings” tab on the display dialog-box.

Mode

Setting up the TV with Your PC ¦

Not available when connecting through HDMI/DVI

✎

cable.

Coarse / Fine ■ : Removes or reduces picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Finetune again. After the noise has been reduced, readjust the picture so that it is aligned to the centre of screen.

Position ■ : Adjust the PC screen position with direction button (▲ / ▼ / ◄ / ►).

Image Reset ■ : Resets the image to default settings.

Panel” window and a display dialog-box will appear.

The correct size setting (resolution) [Optimum: 1920 X y 1080 pixels]

If a vertical-frequency option exists on your display y settings dialog box, the correct value is “60” or “60 Hz”. Otherwise, just click “OK” and exit the dialog box.

Sound Menu

Changing the Preset Sound Mode ¦

Standard ■ : Selects the normal sound mode.

Music ■ : Emphasizes music over voices. Movie ■ : Provides the best sound for

movies. Clear Voice ■ : Emphasizes voices over

other sounds.

Adjusting sound settings ¦

Equalizer

Adjusts the sound mode (standard sound mode only).

■ Balance L/R: Adjusts the balance between the right and left speaker.

100Hz / 300Hz / 1kHz / 3kHz / 10kHz ■ (Bandwidth Adjustment): Adjusts the level of speciﬁc bandwidth frequencies.

Reset ■ : Resets the equalizer to its default settings.

Sound Systems, Etc. ¦

Virtual Surround (Off / On)

This function provides a virtual 5.1 channel surround sound experience through a pair of speakers or headphones using HRTF (Head Related Transfer Function) technology.

If ✎ Speaker Select is set to External Speaker, Virtual

Surround is disabled.

Dialog Clarity (Off / On)

This function allows you to increase the intensity of a voice over background music or sound effects so that dialog can be heard more clearly when viewing a show.

Audio Language

(digital channels only) Change the default value for audio languages.

The available language may differ depending on the

✎

broadcast.

Audio Format (MPEG / Dolby Digital 5.1)

(digital channels only) When sound is emitted from both the main speaker and the

audio receiver, a sound echo may occur due to the decoding speed difference between the main speaker and the audio receiver. In this case, use the TV Speaker function.

Audio Format ✎ option may differ depending on the

broadcast. 5.1ch Dolby digital sound is only available when connecting an external speaker through an

optical cable.

English

Basic Features

HDMI

CH LIST

POWER

HDMI

DUAL

I-II

P . MODE

S.MODE

SOURCE

CH LIST

Audio Description

(not available in all locations) (digital channels only)

This function handles the Audio Stream for the AD (Audio Description) which is sent along with the Main audio from the broadcaster.

Audio Description (Off / On) ■ : Turn the audio description function on or off.

Volume ■ : Adjust the audio description volume.

Auto Volume (Off / Normal / Night)

To equalize the volume level on each channel, set to Normal.

Night ■ : This mode provides an improved sound

experience compared to Normal mode, making almost no noise. It is useful at night.

Speaker Select (External speaker / TV speaker)

A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver. In this case, set the TV to External Speaker.

When ✎Speaker Select is set to External Speaker, the volume and MUTE buttons will not operate and the sound settings will be limited.

When ✎Speaker Select is set to External Speaker, you should use these settings.

TV xSpeaker: Off , External Speaker: On

When ✎Speaker Select is set to TV Speaker, you should use these settings.

TV xSpeaker: On , External Speaker: On

If there is no video signal, both speakers will be mute.

✎

SPDIF Output ■ : SPDIF (Sony Philips Digital InterFace) is used to provide digital sound, reducing interference going to speakers and various digital devices such as a DVD player.

Audio Format: During the reception of a digital TV broadcast, you can select the Digital Audio output (SPDIF) format from the options PCMl or Dolby Digital.

By connecting to 5.1ch speakers in a Dolby

✎

Digital setup, maximize your interactive 3D sound experience.

Audio Delay: Correct audio-video mismatch, when watching TV or video, and listening to digital audio output using an external device such as an AV receiver.

Dolby Digital Comp (Line / RF) ■ : This function minimizes signal disparity between a dolby digital signal and a voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound).

Select ✎Line to obtain dynamic sound, and RF to reduce the difference between loud and soft sounds at night time.

Line: Set the output level for signals greater or less than

-31dB (reference) to either -20dB or -31dB. RF: Set the output level for signals greater or less than

-20dB (reference) to either -10dB or -20dB.

Sound Reset (OK / Cancel)

Reset all sound settings to the factory defaults.

Selecting the Sound Mode ¦

When you set to Dual l-ll, the current sound mode is displayed on the screen.

Additional Setting

(digital channels only)

DTV Audio Level (MPEG / HE-AAC) ■ : This function allows you to reduce the disparity of a voice signal (which is one of the signals received during a digital TV broadcast) to a desired level.

According to the type of broadcast signal, ✎MPEG / HE-AAC can be adjusted between -10dB and 0dB.

To increase or decrease the volume, adjust

✎

between the range 0 and -10 respectively.

Audio

Type

Stereo

NICAM

Stereo

If the stereo signal is weak and an automatic switching,

✎

occurs, then switch to the mono. Only activated in stereo sound signal.

✎

Only available when the ✎Input source is set to TV.

Mono Mono

Stereo

Dual

Mono Mono

Stereo

Dual

Dual I-II Default

Stereo ↔ Mono Dual I ↔ Dual II

Mono ↔ Stereo

Mono → Dual I

 Dual II 

Automatic

change

Dual I

Automatic

change

Dual I

English

03 Basic Features

Setup Menu

10 TV ATV1

00 00

▲

▼

00 00

▲

▼

Setting the Time ¦

Time

Clock ■ : Setting the clock is for using various timer

features of the TV.

The current time will appear every time you press

the INFO button.

If you disconnect the power cord, you have to set

✎

the clock again.

Clock Mode (Auto / Manual)

Depending on the broadcast station and signal,

✎

the auto time set up may not be correct. In this case, set the time manually.

The antenna must be connected in order to set

✎

the time automatically.

Clock Set: Set the Day, Month, Year, Hour and Minute manually.

Available only when ✎Clock Mode is set to

Manual.

Time Zone: Select your time zone.

This function is only available when the ✎Clock

Mode is set to Auto.

Using the ¦ Sleep Timer

Sleep Timer ■

after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes).

Setting the On/Off ¦ Timer

To cancel ✎Sleep Timer, select Off.

: Automatically shuts off the TV

On Time / Off Time: Set the hour, minute, and activate

/ inactivate. (To activate timer with the setting you have chosen, set to Activate.)

Volume: Set the desired volume level. Source: Select TV or USB content to be played when

the TV is turned on automatically. (USB can be selected only when a USB device is connected to the TV)

Antenna (when the Source is set to TV): Select ATV or DTV.

Channel (when the Source is set to TV): Select the

desired channel. Contents (when the Source is set to USB): Select a

folder in the USB device containing music or photo ﬁles to be played when the TV is turned on automatically.

If there is no music file on the USB device or the

✎

folder containing a music file is not selected, the Timer function does not operate correctly.

When there is only one photo file in the USB

✎

device, the Slide Show will not play. If a folder name is too long, the folder cannot be

✎

selected. Each USB you use is assigned its own folder.

✎

When using more than one of the same type of USB, make sure the folders assigned to each USB have different names.

Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at you convenience. If you

select Manual, you can set up the day you want to activate the timer.

The

✎ c

mark indicates the day is selected.

Auto Power Off (available only when the TV is turned on

✎

by Timer): The TV will be automatically turned off after 3 hours of being left idle to prevent overheating.

Locking Programs ¦

Timer 1 / Timer 2 / Timer 3 ■ : Three different on / off

timer settings can be made. You must set the clock ﬁrst.

Timer 1

On Time

Inactivate

Off Time

Inactivate

Volume

Repeat

Source Antenna Channel

Once

Sun Mon Tue Wed Thu Fri Sat

Move

U Adjust E

Enter R Return

Security

The PIN input screen appears before the setup screen.

✎

Enter your 4-digit PIN, the default of which is “0-0-0-0”.

✎

Change the PIN using the Change PIN option.

■ Child Lock (Off / On): Lock channels in Channel Manager, to prevent unauthorized users, such as children, from watching unsuitable programme.

Available only when the ✎Input source is set to TV.

Parental Lock (Parental Rating) ■ : Prevent unauthorized users, such as children, from watching unsuitable programme with a user-deﬁned 4-digit PIN code.

Allow All: Unlock all TV ratings.

The items of ✎Parental Lock differs depending on the country.

English

Basic Features

POWER

HDMI

SUBT.

DUAL

I-II

P . MODE

S.MODE

SOURCE

CH LIST

Language

Subtitle

Use this menu to set the Subtitle mode.

Digital Text (Disable / Enable) (UK only)

If the programme broadcasts with digital text, this feature is enabled.

Network (Network Type / Network Setup / Network Test / Samsung Wireless Link / Connect SWL)

For details on setting up options, refer to the “Network Connection” instructions. (P. 24)

■ Change PIN: Change your personal ID number required

to set up the TV.

If you forget the PIN code, press the remote

✎

control buttons in the following sequence, which resets the PIN to “0-0-0-0”: POWER (off) →

MUTE → 8 → 2 → 4 → POWER (on).

Other Features ¦

Menu Language ■ : Set the menu language. Teletext Language ■ : Set a desired language for teletext.

English is the default in cases where the selected

✎

language is unavailable in the broadcast.

Preference (Primary Audio Language / Secondary ■ Audio Language / Primary Subtitle Language / Secondary Subtitle Language / Primary Teletext Language / Secondary Teletext Language): Select

a language, which will be the default language when a channel is selected.

The subtitle feature doesn’t work in

✎

Component or HDMI modes. Subtitle (Off / On) ■ : Switches subtitles

on or off. Mode (Normal / Hearing Impaired) ■ :

Sets the subtitle mode. Subtitle Language ■ : Sets the subtitle language.

If the programme you are watching does not

✎

support the Hearing Impaired function, Normal automatically activates even if the Hearing Impaired mode is selected.

English is the default in cases where the selected

✎

language is unavailable in the broadcast.

General

Game Mode (Off / On) ■ : When connecting to a game

console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by selecting game mode.

NOTE

✎

Precautions and limitations for x game mode

To disconnect the game console and connect – another external device, set Game Mode to Off in the setup menu.

If you display the TV menu in Game Mode, the – screen shakes slightly.

Game Mode x is not available in TV, PC and PIP

mode. When Game Mode is set to On, Scart out is not supported.

After connecting the game console, set xGame Mode to On. Unfortunately, you may notice reduced picture quality.

If xGame Mode is On:

Picture – mode is set to Standard and Sound mode is set to Movie.

Equalizer – is not available.

BD Wise (Off / On) ■ : Provides the optimal picture quality

for Samsung DVD, Blu-ray and Home Theatre products which support BD Wise. When BD Wise is turned On, the picture mode is automatically changed to the optimal resolution.

Available when connecting Samsung products

✎

that support BD Wise through a HDMI cable.

Menu Transparency (Bright / Dark) ■ : Se t the Transparency of the menu.

■ Melody (Off / Low / Medium / High): Set so that a melody plays when the TV is turned on or off.

Common Interface

CI Menu ■ : This enables the user to select from the CAM-

provided menu. Select the CI Menu based on the menu PC Card.

Application Info. ■ : View information on the CAM inserted into the CI slot and on the “CI or CI+ CARD” which is inserted into the CAM. You can install the CAM anytime whether the TV is on or off.

1. Purchase a CI CAM module at your nearest dealer or by

phone.

2. Firmly insert the “CI or CI+ CARD” into the CAM in the

direction of the arrow.

3. Insert the CAM with the “CI or CI+ CARD” into the

common interface slot, in the direction of the arrow so that it aligns parallel with the slot.

4. Check if you can see a picture on a scrambled signal

channel.

Wireless Remote Control (On / Off)

Turn wireless remote controls on or off or give permission to wireless remote controls.

English

03 Basic Features

Picture In Picture ( ¦ PIP)

PIP

Watches simultaneously the TV tuner and one external video source. PIP (Picture-in-Picture) does not function in the same mode.

NOTE

✎

If you turn the TV off while watching in xPIP mode, the PIP window will disappear.

You may notice that the picture in the PIP window

becomes slightly unnatural when you use the main screen to view a game or karaoke.

PIP settings

Main picture Sub picture Component, HDMI1/DVI,

HDMI2, HDMI3, HDMI4, PCTV

PIP (Off / On) ■ : Activate or deactivate the PIP function. Channel ■ : Select the channel for the sub-screen. Size ( ■

/ Ã): Select a size for the sub-picture.

Position ( ■

sub-picture. Sound Select (Main / Sub) ■ : You can choose the

desired sound (Main / Sub) in PIP mode.

/ – / — / œ): Select a position for the

Support Menu

Self Diagnosis

Self Diagnostic might take few seconds, this is part of the normal operation of the TV.

Picture Test (Yes / No) ■ : Use to check for picture problems and if the problem continues to occur check the colour pattern.

Sound Test (Yes / No) ■ : Use the built-in melody sound to check for sound problems.

If you hear no sound from the TV’s speakers,

✎

before performing the sound test, make sure

Speaker Select is set to TV speaker in the Sound menu.

The melody will be heard during the test even if

✎

Speaker Select is set to External Speaker or the sound is muted by pressing the MUTE button.

Signal Information ■ : (digital channels only) HDTV channel’s reception quality is either perfect or the channels are unavailable. Adjust your antenna to increase signal strength.

Troubleshooting ■ : If the TV seems to have a problem, refer to this description.

If none of these troubleshooting tips apply, contact

✎

the Samsung customer service centre.

Software Upgrade

Software Upgrade can be performed via a broadcasting

signal or by downloading the latest ﬁrmware from samsung. com to a USB memory device.

Current Version the software already installed in the TV.

Software is represented as “Year/Month/Day_Version”.

✎

Software Upgrade

Current Version 2010/01/18_000001

By USB ►

By Online By Channel Standby Mode Upgrade : 2 hours later

Alternative Software ----/--/--/--_------

U Move E Enter R Return

Installing the Latest Version

By ■ USB: Insert a USB drive

containing the ﬁrmware upgrade ﬁle, downloaded from www.samsung.com, into the TV. Please be careful not to disconnect the power or remove the USB drive until upgrades are complete. The TV will be turned off and on automatically after completing the ﬁrmware upgrade. When software is upgraded, video and audio settings you have made will return to their default settings. We advise you to write down your settings so that you can easily reset them after the upgrade.

TV Side Panel

TV Rear Panel

USB Drive

English

Basic Features

By Online ■ : Upgrade the software using the Internet.

First, configure your network. For detailed

✎

procedures on using the Network Setup, refer to the “Network Connection” instructions.

If the Internet connection doesn’t operate properly,

✎

the connection may be broken. Please retry downloading. If the problem persists, download by USB and upgrade.

By Channel ■ : Upgrade the software using the broadcasting signal.

If the function is selected during the software

✎

transmission period, software will be automatically searched and downloaded.

The time required to download the software is

✎

determined by the signal status.

Standby Mode Upgrade ■ : A manual upgrade will be automatically performed at selected time. Since the power of the unit is turned on internally, the screen may be turned on slightly for the LCD product. This phenomenon may continue for more than 1 hour until the software upgrade is complete.

Alternative ■ Software (backup): Displays the Software version downloaded through By Online. During the software upgrading, When the Upgrade will discontinue from last step, this function be activated.

HD Connection Guide

Refer to this information when connecting external devices to the TV.

Contact Samsung

View this information when your TV does not work properly or when you want to upgrade the software. You can ﬁnd information regarding our call centres, and how to download products and software.

English

Advanced Features

Using an HDMI/DVI Cable / a D-sub Cable

Connecting to a PC

04 Advanced Features

DVI OUT

AUDIO OUT

PC OUT

Display Modes (D-Sub and HDMI/DVI Input)

Optimal resolution is 1920 X 1080 @ 60 Hz

Mode Resolution

IBM

MAC

VESA CVT

VESA DMT

VESA GTF

VESA DMT / DTV CEA 1920 x 1080p 67.500 60.000 148.500 +/+

NOTE

✎

640 x 350 31.469 70.086 25.175 +/720 x 400 31.469 70.087 28.322 -/+ 640 x 480 35.000 66.667 30.240 -/832 x 624 49.726 74.551 57.284 -/-

1152 x 870 68.681 75.062 100.000 -/-

720 x 576 35.910 59.950 32.750 -/+ 1152 x 864 53.783 59.959 81.750 -/+ 1280 x 720 56.456 74.777 95.750 -/+ 1280 x 960 75.231 74.857 130.000 -/+

640 x 480 31.469 59.940 25.175 -/-

640 x 480 37.861 72.809 31.500 -/-

640 x 480 37.500 75.000 31.500 -/-

800 x 600 37.879 60.317 40.000 +/+

800 x 600 48.077 72.188 50.000 +/+

800 x 600 46.875 75.000 49.500 +/+ 1024 x 768 48.363 60.004 65.000 -/1024 x 768 56.476 70.069 75.000 -/1024 x 768 60.023 75.029 78.750 +/+ 1152 x 864 67.500 75.000 108.000 +/+

1280 x 1024 63.981 60.020 108.000 +/+ 1280 x 1024 79.976 75.025 135.000 +/+

1280 x 800 49.702 59.810 83.500 -/+ 1280 x 800 62.795 74.934 106.500 -/+ 1280 x 960 60.000 60.000 108.000 +/+ 1280 x 720 45.000 60.000 74.250 +/+ 1360 x 768 47.712 60.015 85.500 +/+ 1440 x 900 55.935 59.887 106.500 -/+ 1440 x 900 70.635 74.984 136.750 -/+

1680 x 1050 65.290 59.954 146.250 -/+

1280 x 720 52.500 70.000 89.040 -/+

1280 x 1024 74.620 70.000 128.943 -/-

Horizontal Frequency

(KHz)

Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H / V)

For HDMI/DVI cable connection, you must use the xHDMI IN 1(DVI) jack. The interlace mode is not supported.

The set might operate abnormally if a non-standard video format is selected.

Separate and Composite modes are supported. SOG(Sync On Green) is not supported.

English

Advanced Features

Network Connection

You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or wireless connection.

Connecting to a Wired Network ¦

You can attach your TV to your LAN using cable in three ways:

You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a Cat

5 cable. See the diagram below.

The Modem Port on the Wall External Modem

You can attach your TV to your LAN by connecting the LAN port on the back of your TV to a IP Sharer which is connected y to an external modem. Use Cat 5 cable for the connection. See the diagram below.

The Modem Port on the Wall External Modem

(ADSL / VDSL / Cable TV)

Depending on how your network is conﬁgured, you may be able to attach your TV to your LAN by connecting the LAN y port on the back of your TV directly to a network wall outlet using a Cat 5 cable. See the diagram below. Note that the wall outlet is attached to a modem or router elsewhere in your house.

The LAN Port on the Wall

(ADSL / VDSL / Cable TV)

(having DHCP server)

LAN CableModem Cable

IP Sharer

LAN Cable

TV Rear Panel

LAN Cable

If you have a Dynamic Network, you should use an ADSL modem or router that supports Dynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS values your TV needs to access the Internet so you don’t have to enter them manually. Most home networks are Dynamic Networks. Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address, subnet mask, gateway, and DNS values manually on your TV’s Cable Setup Screen when you set up the network connection. To get the IP address, subnet mask, gateway, and DNS values, contact your Internet Service Provider (ISP). If you have a Windows computer, you can also get these values through your computer.

You can use ADSL modems that support DHCP if your network requires a Static IP address. ADSL modems that

✎

support DHCP also let you use Static IP addresses.

English

04 Advanced Features

Network Setup (Auto)

Use the Automatic Network Setup when connecting your TV to a network that supports DHCP. To set up your TV’s cable network connection automatically, follow these steps:

How to set up automatically

1. Connect your TV to your LAN as described in the

previous section.

2. Turn on your TV, press the MENU button on your remote, use the ▲or▼ button to select Setup, and then press the ENTERE button.

3. Use the ▲or▼ button to select Network in the Setup menu, and then press the ENTERE button. The Network screen appears.

Network Type : Wired ►

Network Setup

Network test

4. On the Network screen, select Network Type.

5. Set Network Type to Wired.

6. Select Network Setup. The Network Setup screen

appears.

Network

U Move E Enter R Return

Network Setup (Manual)

Use the Manual Network Setup when connecting your TV to a network that requires a Static IP address.

Getting the Network Connection Values

To get the Network connection values on most Windows computers, follow these steps:

1. Right click the Network icon on the bottom right of the

screen.

2. In the pop-up menu that appears, click Status.

3. On the dialog that appears, click the Support tab.

4. On the Support Tab, click the Details button. The

Network connection values are displayed.

How to set up manually

To set up your TV’s cable network connection manually, follow these steps:

1. Follow Steps 1 through 6 in the “How to set up

automatically” procedure.

2. Set Internet Protocol Setup to Manual.

3. Press the ▼ button on your remote to go to the ﬁrst

entry ﬁeld.

4. Enter the IP Address, Subnet Mask, Gateway, and DNS Server values. Use the number buttons on your

remote to enter numbers and the arrow buttons to move from one entry ﬁeld to another.

5. When done, press the RETURN button on your remote.

6. Select Network Test to check the Internet connectivity.

Network Setup

Internet Protocol Setup : Auto ►

IP Address :

Subnet Mask :

Gateway :

DNS : Auto

DNS Server :

7. Set Internet Protocol Setup to Auto.

8. Auto acquires and enters the needed Internet values

automatically.

9. Wait two minutes, and then press the RETURN button

on your remote.

10. If the Network Function has not acquired the network connection values, go to the directions for Manual.

U Move E Enter R Return

English

Advanced Features

Connecting Wireless Network ¦

To connect your TV to your network wireless, you need a wireless router or modem and a Samsung Wireless LAN Adapter (WIS09ABGN), which you connect to your TV’s back or side panel USB jack. See the illustration below.

To use the SWL(Samsung Wireless Link) function, connect to the ✎USB 1 (HDD) port.

TV Rear Panel

TV Side Panel

The LAN Port on

the Wall

Samsung’s Wireless LAN adapter is sold separately and is offered by select retailers, Ecommerce sites and Samsungparts.com. Samsung’s Wireless LAN adapter supports the IEEE 802.11A/B/G and N communication protocols. Samsung recommends using IEEE 802.11N. When you play video over a IEEE 802.11B/G connection, the video may not play smoothly.

NOTE

✎

You must use the “Samsung Wireless LAN Adapter” (WIS09ABGN) to use a wireless network.

Samsung’s Wireless LAN adapter is sold separately. The WIS09ABGN Wireless LAN adapter is offered by select retailers,

Ecommerce sites and Samsungparts.com. To use a wireless network, your TV must be connected to a wireless IP sharer. If the wireless IP sharer supports DHCP, your TV can

use a DHCP or static IP address to connect to the wireless network. Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer is currently

being used by another device nearby, this will result in interference and communication failure. If you apply a security system other than the systems listed blow, it will not work with the TV.

If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or TKIPAES (WPS2Mixed)

for your AP, Samsung T Vs will not support a connection in compliance with new Wi-Fi certification specifications. If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button Configuration) or PIN

(Personal Identification Number). WPS will automatically configure the SSID and WPA key in either mode. Keep the Samsung Wireless LAN Adaptor at a distance from the TV. If you watch the TV with the adaptor connected nearby, images

may appear corrupted for some channels. If your router, modem, or device is not, it may not connect to the TV via the “Samsung Wireless L AN Adapter.”

Connection Methods x: You can setup the wireless network connection on six ways.

–

PBC (WPS)

–

Auto Setup (Using the Auto Network Search function)

–

Manual Setup

–

Ad-Hoc

All of Samsung Wireless LAN Adapter shoud be connected directly to the TV's USB port. USB HUB are not supported.

Notice

The picture may appear corrupted or have static for some channels when the TV is connected to the Samsung Wireless LAN Adapter In such case, establish a connection using one of the following methods:

Wireless IP sharer

Samsung Wireless

LAN Adapter

LAN Cable

Method 1

Connect using the USB right angle adapter

Method 2

Connect via an extension cable

ali

English

04 Advanced Features

Network Setup (PBC (WPS))

A B C D E F G

H I J K L M N

O P Q R S T U

V W X Y Z

0~9

Security Key

0 entered

Number

Lower case

Delete Space

How to set up using PBC (WPS)

If your router has a PBC (WPS) button, follow these steps:

1. Connect your TV to your LAN as described in the previous section.

2. Turn on your TV, press the MENU button on your remote, use the ▲or▼ button to select Setup, and then press the ENTERE button.

3. Use the ▲or▼ button to select Network in the Setup menu, and then press the ENTERE button.

4. On the Network screen, select Network Type.

5. Set Network Type to Wireless.

6. Select Network Setup. The Network Setup screen

appears.

Select a network : Not Selected ►

Internet Protocol Setup : Auto

IP Address :

Subnet Mask :

Gateway :

DNS : Auto DNS Server :

7. Press the Red button on your remote.

8. Press the PBC (WPS) button on your router within 2

minutes. Your TV player automatically acquires all the network setting values it needs and connects to your network.

9. After the network connection is set up, press the

RETURN button to exit the Network Setup screen.

Network Setup (Auto)

Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted security code called an Access or Security Key. The Security Key is based on a Pass Phrase, typically a word or a series of letters and numbers of a speciﬁed length you were asked to enter when you set up security for your wireless network. If you use this method of setting up the network connection, and have a Security Key for your wireless network, you will have to enter the Pass Phrase during the setup process.

How to set up automatically

To set up the wireless connection automatically, follow these steps:

1. Follow Steps 1 through 6 in the “How to set up PBC (WPS)” above.

2. Press the ▼ button to select Internet Protocol Setup, and then press the ENTERE button. Press the ▲ or ▼ button to select Auto, and then press the ENTERE button.

Network Setup

U Move E Enter R Return

3. Press the ▲ button to go to Select a Network, and then press the ENTERE button. The Network function searches for available wireless networks. When done, it displays a list of the available networks.

4. In the list of networks, press the ▲ or ▼ button to select a network, and then press the ENTERE button.

If the AP is set to Hidden (Invisible), you have

✎

to select Add Network and enter the correct Network Na me (SSID) and Security Key to establish the connection.

5. If the Security/PIN pop-up appears, go to Step 6. If the Network Connecting Screen appears, go to Step 10.

6. Press the ▲ or ▼ button to select Security or PIN. For most home networks, you would select Security (for Security Key). The Security Screen appears.

Network Setup

n Move E Enter R Return

7. On the Security screen, enter your network’s Pass Phrase.

You should be able to find the Pass Phrase on

✎

one of the set up screens you used to set up your router or modem.

8. To enter the Pass Phrase, follow these general directions:

Press the number buttons on your remote to enter – numbers.

Use the direction buttons on your remote to move – from button to button on the Security Key screen.

Press the Red button to change case or display – symbols/characters.

To a enter letter or symbol, move to the letter or – symbol, and then press the ENTERE button.

To delete the last letter or number you entered, – press the Green button on your remote.

9. When done, press the Blue button on your remote. The Network Connecting screen appears.

10. Wait until the connection conﬁrmation message is displayed, and then press the ENTERE button. The

Network Setup screen re-appears.

11. To test the connection, press the RETURN button to

select Network Test, and then press the ENTERE button.

English

Advanced Features

Network Setup (Ad-Hoc)

You can connect to a mobile device without an access point through the “Samsung Wireless LAN Adapter” by using a peer to peer network.

How to connect to new Ad-hoc

1. Follow Steps 1 through 6 in the “How to set up using

PBC (WPS)”. (P. 26)

2. Choose Select a network. A list of devices/networks

appears.

3. While in the device list, press the Blue button on the

remote.

The message ✎Ad-hoc is a direct WI-Fi

connection with cellphone or PC. The existing network system may have limited functionality. Do you want to change the network connection? is displayed.

4. Input the generated Network Name (SSID) and Security Key into the device you want to connect.

How to connect an existing Ad-hoc device

1. Follow Steps 1 through 6 in the “How to set up using

PBC (WPS)”. (P. 26)

2. Choose Select a network. Then, the device list will be displayed.

3. Select the device you want in the Device list.

4. If security key was applied, input the security key.

If network doesn’t operate normally, check

✎

the Network Name (SSID) and Security Key again. An incorrect Security Key may cause a malfunction.

Network Setup (Manual)

If the other methods do not work, you need to enter the Network setting values manually.

Getting the Network Connection Values

To get the Network setting values on most Windows computers, follow these steps:

1. Right click the Network icon on the bottom right of the screen.

2. In the pop-up menu, click Status.

3. On the dialog that appears, click the Support tab.

4. On the Support tab, click the Details button. The

Network settings are displayed.

How to set up manually

To enter the Network settings into your TV, follow these steps:

1. Follow Steps 1 through 6 in the “How to set up using

PBC (WPS)”. (P. 26)

2. Press the ▼ button to select Internet Protocol Setup, and then press ENTERE button. Press the ▲ or ▼ button to select Manual, and then press ENTER button.

3. Press the ▼ button to go to the ﬁrst entry ﬁeld (IP Address).

4. Use the number buttons to enter numbers.

5. When done with each ﬁeld, use the ► button to move

successively to the next ﬁeld. You can also use the other arrow buttons to move up, down, and back.

6. Enter the IP Address, Subnet Mask, and Gateway values.

7. Press the ▲ or ▼ button to go to DNS.

8. Press the ▼ button to go to the ﬁrst DNS entry ﬁeld.

Enter the numbers as above.

9. When done, press the ▲ button to go to Select a Network. Select your network, and then press

ENTERE button.

10. Go to Step 4 in the “How to set up automatically” (P. 26),

and follow the directions from that point on.

If Your TV Fails to Connect to the Internet

Your TV may not be able to connect to the Internet because your ISP has permanently registered the MAC address (a unique identifying number) of your PC or modem, which it then authenticates each time you connect to the Internet as a way of preventing unauthorized access. As your TV has a different MAC address, your ISP can not authenticate its MAC address, and your TV can not connect.

To resolve this problem, ask your ISP about the procedures required to connect devices other than a PC (such as your TV) to the Internet.

If your Internet service provider requires an ID or password to connect to the Internet, your TV may not be able to connect to the Internet. If this is the case, you must enter your ID or password when connecting to the Internet.

The internet connection may fail because of a ﬁrewall problem. If this is the case, contact your Internet service provider.

If you cannot connect to the Internet even after you have followed the procedures of your Internet service provider, please contact Samsung Electronics.

English

Media Play

SUM

04 Advanced Features

Enjoy photos, music and/or movie ﬁles saved on

MediaPlay

a USB Mass Storage Class (MSC) device and/or your PC.

Videos

Change Device

View Device E Enter R Return

Connecting a ¦ USB Device

1. Turn on your TV.

2. Connect a USB device containing photo, music and/or movie

ﬁles to the USB 1 (HDD) or USB 2 jack on the side or rear of the TV.

3. When USB is connected to the TV, popup window appears. Then you can select Media Play.

TV Side Panel

TV Rear Panel

¦ Connecting to the PC through network

You can play pictures, music and videos saved on your PC or on your TV through a network connection in the Media Play mode.

✎

If you use “www.samsung.com.”

LAN

Media Play through saved file on your PC, you should download “PC Share Manager” and users manual from

TV Side Panel

External Modem

(ADSL/VDSL/Cable TV)

Samsung

Wireless LAN

Adapter

TV Rear Panel

Wireless IP

sharer

LAN Cable

1. For more information on how to conﬁgure your network, refer to ‘Network Connection’.

You are recommended to locate both TV and PC in same subnet. The ﬁrst 3 parts of the subnet address of the TV and

–

the PC IP addresses should be the same and only the last part (the host address) should be changed. (e.g. IP Address:

123.456.789.**)

2. Using a LAN cable, connect between the external modem and the PC onto which the Samsung PC Share Manager program will be installed.

You can connect the TV to the PC directly without connecting it through a Sharer (Router).

–

English

Advanced Features

Functions that are not supported when connecting to a PC through a network:

✎

The xBackground Music and Background Music Setting functions. Sorting files by preference in the xPhoto, Music, and Movie folders. The x (REW) or µ (FF) button while a movie is playing.

The Divx DRM, Multi-audio, embedded caption does not supported.

✎

Samsung PC Share manager should be permitted by the firewall program on your PC.

✎

When you use ✎Media Play mode through a network connection, According to functions of the provided server:

The sorting method may vary.

The scene search function may not be supported.

The xPlay Continuously function, which resumes playing of a video, may not be supported.

The – Play Continuously function does not support multiple users. (It will have only memorized the point where the most recent user stopped playing.)

The x

(REW), µ (FF) or  (Pause) buttons may not work depending on the content information.

If you experience any file stuttering issue while playing a video over a wireless network, we recommend using a wired

✎

network. It might not work properly with unlicensed multimedia files.

✎

Need-to-Know List before using ✎Media Play

MTP (Media Transfer Protocol) is not supported.

The file system supports FAT16, FAT32 and NTFS.

Certain types of USB Digital camera and audio devices may not be compatible with this TV.

Media Play only supports USB Mass Storage Class (MSC) devices. MSC is a Mass Storage Class Bulk-Only

Transport device. Examples of MSC are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not supported). Devices should be connected directly to the TV’s USB port.

Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data.

SAMSUNG is not responsible for any data file damage or data loss. Connect a USB HDD to the dedicated port, xUSB1 (HDD) port. Do not disconnect the USB device while it is loading.

The higher the resolution of the image, the longer it takes to display on the screen.

The maximum supported JPEG resolution is 15360X8640 pixels.

For unsupported or corrupted files, the “Not Supported File Format” message is displayed.

If the files are sorted by Basic View, up to 1000 files can be displayed in each folder.

MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management

(DRM) is a technology that supports the creation of content, the distribution and management of the content in an integrated and comprehensive way, including the protection of the rights and interests of the content providers, the prevention of the illegal copying of contents, as well as managing billings and settlements.

If more than 2 PTP devices are connected, you can only use one at a time.

If more than two MSC devices are connected, some of them may not be recognized. A USB device that requires high

power (more than 500mA or 5V) may not be supported. If an over-power warning message is displayed while you are connecting or using a USB device, the device may not

be recognized or may malfunction. TV has been no input during time set in xAuto Protection Time, the Screensaver will run. The power-saving mode of some external hard disk drives may be released automatically when connected to the TV.

If a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read.

If a USB device connected to the TV is not recognized, the list of files on the device is corrupted or a file in the list is

not played, connect the USB device to the PC, format the device and check the connection. If a file deleted from the PC is still found when Media Play is run, use the “Empty the Recycle Bin” function on the PC

to permanently delete the file.

+ 168 hidden pages