Samsung LE40A457, LE32A457C1C, LE40A456C2C, LE40A455, LE40A455C1C User Manual

Download

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Country

AUSTRIA 0800-SAMSUNG (726-7864) www.samsung.com/at BELGIUM 0032 (0)2 201 24 18 www.samsung.com/be

CZECH REPUBLIC

DENMARK 70 70 19 70 www.samsung.com/dk EIRE 0818 717 100 www.samsung.com/ie FINLAND 030-6227 515 www.samsung.com/

FRANCE

GERMANY 01805 - SAMSUNG (726-7864) (€ 0,14/Min) www.samsung.com HUNGARY 06-80-SAMSUNG (726-7864) www.samsung.com ITALIA 800-SAMSUNG (726-7864) www.samsung.com LUXEMBURG 0035 (0)2 261 03 710 www.samsung.com/be NETHERLANDS 0900-SAMSUNG (726-7864) (€ 0,10/Min) www.samsung.com/nl NORWAY 815-56 480 www.samsung.com/no

POLAND

PORTUGAL 80820-SAMSUNG (726-7864) www.samsung.com/pt SLOVAKIA 0800-SAMSUNG (726-7864) www.samsung.com/sk SPAIN 902 10 11 30 www.samsung.com SWEDEN 0771-400 200 www.samsung.com/se SWITZERLAND 0800-SAMSUNG (726-7864) www.samsung.com/ch U.K 0845 SAMSUNG (7267864) www.samsung.com TURKEY 444 77 11 www.samsung.com ESTONIA 800-7267 www.samsung.ee LATVIA 800-7267 www.samsung.com/lv LITHUANIA 8-800-77777 www.samsung.lt KAZAHSTAN 8-10-800-500-55-500 www.samsung.kz KYRGYZSTAN 00-800-500-55-500 RUSSIA 8-800-555-55-55 www.samsung.ru TADJIKISTAN 8-10-800-500-55-500 UKRAINE 8-800-502-0000 www.samsung.com UZBEKISTAN 8-10-800-500-55-500 www.samsung.uz

Customer Care Centre

844 000 844 www.samsung.com/cz

Distributor pro Českou republiku: Samsung Zrt., česka organizační složka Vyskočilova 4, 14000 Praha 4

3260 SAMSUNG (€ 0,15/Min) 08 25 08 65 65 (€ 0,15/Min)

0 801 801 881 022-607-93-33

Web Site

www.samsung.com

www.samsung.com/pl

LCD TV

user manual

BN68-01424B-00

imagine the possibilities

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/global/register

Model Serial No.

This product is only applicable to Finnish, Swedish and Danish broadcasts. Broadcasts are not supported in other countries.

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.(See back cover for more information)

Precautions When Displaying a Still Image

A still image may cause permanent damage to the TV screen.

• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn". To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.

• Watching the LCD TV in 4:3 format for a long period of time may leave traces of

effect to the screen. Damages caused by the above effect are not covered by the Warranty.

• Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.

borders displayed on the left, right and center of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar

Contents

CONNECTING AND PREPARING YOUR TV

List of Parts ........................................................ 2



Installing the Stand

 

Installing the Wall Mount Kit



Viewing the Control Panel



Viewing the Connection Panel



Viewing the Remote Control



Installing Batteries in the Remote Control



Switching On and Off



Placing Your Television in Standby Mode........... 8



Viewing the Menus



Using the TOOLS Button



Plug & Play

SETTING THE CHANNELS



Storing Channels Automatically ........................11



Storing Channels Manually



Adding / Locking Channels



Sorting the Stored Channels



Assigning Channels Names



Fine Tuning Channel Reception

SETTING THE PICTURE



Changing the Picture Standard ........................ 16



Adjusting the Custom Picture



Conguring Detailed Settings on the Picture



Resetting the Picture Settings to the

Factory Defaults ............................................... 18



Changing the Picture Options

SETTING THE SOUND



Sound Features ................................................ 21



Selecting the Sound Mode



Connecting Headphones (Sold separately)

SETTING THE TIME



Setting and Displaying the Current Time .......... 23



Setting the Sleep Timer



Switching the Television On and Off

Automatically .................................................... 24

FUNCTION DESCRIPTION



Choosing Your Language ................................. 24



Melody / Entertainment / Energy Saving



Selecting the Source



Editing the Input Source Names

Symbol Press Note One-Touch

............................................. 2

............................... 2

.................................. 3

........................... 4

............................... 7

.......... 8

......................................... 8

............................................. 9

.................................... 9

....................................................... 10

.............................. 12

.............................. 13

............................ 14

............................. 14

....................... 15

........................... 17

... 17

.......................... 19

............................... 22

..... 22

.................................... 23

......... 25

........................................ 26

...................... 27

Button

USING THE DTV FEATURE

Previewing the DTV Menu System .................. 28



Selecting the Country

 

Updating the Channel List Automatically



Updating the Channel List Manually



Editing Your Favourite Channels



Selecting Channel List



Displaying Programme Information



Viewing the EPG (Electronic Programme

Guide) Information ........................................... 35



Using the Scheduled List



Setting the Default Guide



Viewing All Channels and Favourite Channels



Adjusting the Menu Transparency



Setting up the Parental Lock



Setting the Subtitle



Setting the Subtitle Mode



Selecting the Audio Format



Selecting the Audio Description



Viewing Product Information



Checking the Signal Information



Upgrading the Software



Viewing Common Interface



Selecting the CI (Common Interface) Menu



Resetting



Selecting the Preferred Language

(Subtitle, Audio or Teletext) .............................. 43



Preference

.......................................................... 43

........................................................ 44

....................................... 29

.......... 30

................ 31

...................... 32

..................................... 34

.................. 34

................................. 36

......... 37

.................... 37

............................ 38

........................................... 39

................................. 39

.............................. 39

....................... 40

............................ 40

...................... 41

................................... 41

.............................. 42

..... 42

SETTING THE PC



Setting up Your PC Software

(Based on Windows XP) .................................. 45



Display Modes



Setting up the TV with your PC

ABOUT ANYNET



What is Anynet+? ............................................ 47



Connecting Anynet+ Devices



Setting Up Anynet



Scanning and Switching between Anynet+

Devices ............................................................ 49



Recording



Listening through a Receiver



Check Points before Requesting Service

.................................................. 45

........................ 46

..........................................

......................................................... 51

........................... 47

........................... 51

......... 52

RECOMMENDATIONS FOR USE



Teletext Feature ............................................... 53



Wall-Mount Adjustment

(Sold separately)

(depending on the model) ........................ 55



Using the Anti-Theft Kensington Lock

(depending on the model) ................................ 56



Securing the TV to the Wall



Troubleshooting: Before Contacting

Service Personnel ............................................ 58



Technical and Environmental Specications

.............................. 57

... 59

English

English - 1

List of Parts

Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.

M4XL16

Remote Control

& Batteries

(AAA x 2)



Owner’s Instructions  Warranty card  Safety Guide  Registration Cards

Warranty card / Safety Guide /

➣ ➣

The stand and stand screw may not be included depending on the model.

Power Cord Cover-Bottom

Registration Cards (Not available in all locations)

Stand Screw

X 4

Stand Cleaning Cloth

Installing the Stand

1. Connect your LCD TV and the stand.

Two or more people should carry the TV.

➣

Make sure to distinguish between the front and back of the stand when assembling them.

➣

2. Fasten two screws at position 1 and then fasten two screw at position 2.

Stand the product up and fasten the screws. If you fasten the screws with the LCD TV placed

➣

down, it may lean to one side. The stand is installed for models with the screen size of 37 inch and above.

➣

Installing the Wall Mount Kit

Wall mount items (sold separately) allow you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions provided with the Wall Mount items. Contact a technician for assistance when installing the wall mounted bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own.

Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.

Remove the stand and cover the bottom hole with a

➣

cap and fasten with two screws.

English - 2

Viewing the Control Panel

Side Panel buttons

The product colour and shape may vary depending on the model.

1 SOURCE Toggles between all the available input

sources (TV, Ext.1, Ext.2, AV, S-Video, Component, PC, HDMI1, HDMI2, HDMI3, DTV). In the on-screen menu, use this button as you use the ENTER button on the remote control.

2 MENU Press to see an on-screen menu of your TV’s features.

3 Press to decrease or increase the volume. In the on-screen menu, use the buttons as you use the ◄ and ► buttons on the remote control.

4 Press to change channels. In the on-screen

menu, use the buttons as you use the ▲ and ▼ buttons on the remote control. (Without the Remote Control, you can turn on the TV by using the Channel buttons.)

(Power)

Press to turn the TV on and off. 6 Remote Control Sensor

Aim the remote control towards this spot on the TV.

7 Power Indicator Blinks and turns off when the power is on and lights up in stand-by mode.

8 Speakers

English - 3

Viewing the Connection Panel

LE40A456, LE40A457, LE40A455

[TV Rear Panel]

2 3 54 61

Power Input

LE26A456, LE26A457, LE32A456, LE32A457, LE32A455, LE37A456, LE37A457

[TV Rear Panel]

4 3 5 @

[TV Side Panel]

The product colour and shape may vary depending on the model.

➣

Whenever you connect an external device to your TV, make sure that power on the unit is turned off.

➣ ➣

When connecting an external device, match the colour of the connection terminal to the cable.

English - 4

Power Input

1 PC IN [PC] / [AUDIO]

Connect to the video and audio output jack on your PC.

2 COMPONENT IN

Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear of your set and the other ends to corresponding component video out connectors on the DTV or DVD.

If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD) and connect the DTV (or DVD) to component connector ("P

The P

R, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y

R", "PB", "Y") on your set.

and R-Y or Y, Cb and Cr.

Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends to corresponding audio out connectors on the DTV or DVD.

3 HDMI IN 1, HDMI IN 2, HDMI IN 3

Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD

players) No additional Audio connection is needed for an HDMI to HDMI connection.

When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.

➣

What is HDMI?

“High Denition Multimedia interface” allows the transmission of high denition digital video data

and multiple channels of digital audio.

The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel digital audio.

DVI IN(HDMI2) [R-AUDIO-L]

DVI audio outputs for external devices.

Supported modes for HDMI/DVI and Component

➣

HDMI/DVI 50Hz HDMI/DVI 60Hz

Component O O O O O O

480i 480p 576i 576p 720p 1080i

X X X O O O X O X X O O

4 AUDIO OUT [R-AUDIO-L]

Connect RCA audio cables to AUDIO OUT [R-AUDIO-L] on the rear of your set and the other ends

to corresponding audio in connectors on the Amplier or DVD Home Theatre.

5 ANT IN To view television channels correctly, a signal must be received by the set from one of the following

sources:

An outdoor aerial / A cable television network / A satellite network

6 SERVICE

LE26A456, LE26A457

Connector for SERVICE only.

LE32A456, LE32A457, LE32A455, LE37A456, LE37A457, LE40A456, LE40A457, LE40A455

Connect this to the jack on the optional wall mount bracket. This will allow you to adjust the TV viewing angle using your remote control.

English - 5

7 COMMON INTERFACE Slot

When CI Card isn’t inserted in some channels, "Scrambled

Signal" is displayed on the screen. The pairing information containing a telephone number, CI

Card ID, Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider.

When the channel information conguration has nished, the

message "Updating Completed" is displayed, indicating that the channel list is now updated.

You must obtain a CI Card from a local cable service provider.

➣

Remove the CI Card by carefully pulling it out with your hands since dropping the CI Card may cause damage to it.

➣

Insert the CI-Card in the direction marked on it.

➣

The place of the COMMON INTERFACE Slot may be different depending on its model.

S-VIDEO or VIDEO / R-AUDIO-L

Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or

Camcorder. Connect RCA audio cables to "R-AUDIO-L" on your set and the other ends to corresponding audio

out connectors on the A/V device.

9 Headphones jack

Headphone may be connected to the headphone output on your set. While the head phone is connected, the sound from the built-in speakers will be disabled.

0 Kensington Lock (depending on the model)

The Kensington lock (optional) is a device used to physically x the system when used in a public

place. If you want to use a locking device, contact the dealer where you purchased the TV.

The location of the kensington lock may be different depending on its model.

DIGITAL AUDIO OUT (OPTICAL)

Connect to a Digital Audio Component.

When the HDMI IN jacks are connected, the DIGITAL AUDIO OUT (OPTICAL) jack on the TV

➣

outputs 2 channel audio only. If you want to hear 5.1 channel audio, connect the Optical jack on

the DVD player or Cable/Satellite Box directly to an Amplier or Home Theater, not the TV.

@ EXT 1, EXT 2

Connector

EXT 1 EXT 2

-Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.

Video Audio (L/R) RGB Video + Audio (L/R)

Input Output

O O O O O

Only TV or DTV output is available.

Output you can choose.

English - 6

TOOLS

Viewing the Remote Control

1 Television Standby button 2

Selects the TV and DTV

mode directly 3 Number buttons for direct

channel access

One/Two-digit channel

selection

5 +: Volume increase

: Volume decrease

6 Temporary sound switch-off 7

Electronic Program Guide

(EPG) display 8 Use to quickly select

frequently used functions.

Use to see information on

the current broadcast 0 Colour buttons :

Use these buttons in the

Channel list, etc.

Press to select the optional

display and sound modes for sports, cinema and games.

# Use these buttons in the

DMA, and Anynet+. (

: This remote can be used to control recording on Samsung recorders with the Anynet+ feature)

$ Available source selection % Previous channel ^ P

: Next channel

P : Previous channel

Displays the main on-screen

Displays the Channel List on

screen

(

Returns to the previous

menu ) Control the cursor in the

a Exit the on-screen menu b Use this when connecting

a SAMSUNG DMA (Digital Media Adapter) device through an HDMI interface and switching to DMA mode.(The DMA button is optional.) For more information on the operating procedures, refer to the user manual of the DMA. This button is available when

“Anynet

(HDMI-CEC)" is “On”

(see page 48)

c Picture size selection d

Digital subtitle display

Selects the HDMI mode directly.

Teletext Functions

2 Exit from the teletext display 7 Teletext store 8 Teletext size selection 9 Teletext reveal 0 Fastext topic selection !

Alternately select Teletext,

Double, or Mix. $ Teletext mode selection

(LIST/FLOF)

% Teletext sub page ^

P : Teletext next page

P : Teletext previous page

& Teletext index ( Teletext hold a Teletext cancel

The performance of the remote control may be affected by bright light.

➣

English - 7

Installing Batteries in the Remote Control

1. Lift the cover at the back of the remote control upward as shown in the

figure.

2. Install two AAA size batteries.

Make sure to match the "+" and "–" ends of the batteries with the

➣

diagram inside the compartment.

3. Replace the cover.

➣

Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time.

If the remote control doesn’t work, check the following:

➣

1. Is the TV power on?

2. Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power outage, or is the power cord unplugged?

5. Is there a special uorescent light or neon sign nearby?

Switching On and Off

The mains lead is attached to the rear of your set.

1. Plug the mains lead into an appropriate socket.

The standby indicator lights up on your set.

➣

2. Press the button on your set. You also can press the POWER

➣

the TV on. The channel that you were watching last is reselected automatically.

➣

3. Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or

button on your set.

When you switch the set on for the very rst time, you will be asked to choose language in which the

➣

menus are to be displayed.

4. To switch your set off, press the POWER button again.

button or the TV/DTV button on the remote control to turn

Placing Your Television in Standby Mode

Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

Press the POWER button on the remote control.

The screen is turned off and a red standby indicator appears on your set.

➣

2. To switch your set back on, simply press the POWER , numeric buttons (0~9), TV/DTV button or channel up/down ( / ) button again.

➣

Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to unplug the set from the mains and aerial.

English - 8

Viewing the Menus

1. With the power on, press the MENU button.

The main menu appears on the screen. The menu’ s left side has icons: Picture, Sound, Channel, Setup, Input, Digital Menu.

2. Press the ▲ or ▼ button to select one of the icons. Then press the ENTER button to access the icon’s sub-

menu.

3. Press the EXIT button to exit.

The on-screen menus disappear from the screen after about one minute.

Using the TOOLS Button

You can use the TOOLS button to select your frequently used

functions quickly and easily. The “Tools” menu change depending on

which external input mode you are viewing.

Press the TOOLS button.

The “Tools” menu will appear.

2. Press the ▲ or ▼ button to select a menu.

3. Press the ▲/▼/◄/►/ENTER buttons to display, change, or

use the selected items. For a more detailed description of each function, refer to the corresponding page.

• Anynet+ (HDMI-CEC), see page 48

• Picture Mode, see page 16

• Sound Mode, see page 21

• Sleep Timer, see page 23

• SRS TS XT, see page 21

• Energy Saving, see page 26

• Dual l-ll, see page 22

• Auto Adjustment, see page 46

Mode : Standard  Backlight 7 Contrast 95 Brightness 45 Sharpness 50 Colour 50

Tint G 50 R 50

Detailed Settings  Picture Options  Reset : OK 

Move Enter Return

Anynet+ (HDMI-CEC) Picture Mode : Standard Sound Mode : Custom Sleep Timer : Off SRS TS XT : Off Energy Saving : Off Dual l-ll : Mono

Move Enter Exit

Picture

Tools

English - 9

Plug & Play

When the TV is initially powered on, several basic settings proceed automatically and subsequently. The following settings are available.

Any functions related to Digital TV (DVB) will only work in

countries or areas where DVB-T (MPEG2) digital terrestrial signals are broadcasted. Please confirm with your local dealer if you can receive DVB-T signals. Although this TV set follows the DVB-T specification, maintaining compatibility with the future coming DVB-T digital terrestrial broadcasts is not guaranteed. Several functions may not be available in some countries.

This product is only applicable to Finnish, Swedish and Danish broadcasts. Broadcasts are not

supported in other countries.

Press the POWER button on the remote control.

The message "Start Plug & Play." is displayed with "OK" selected.

2. Select the appropriate language by pressing the ▲ or ▼ button. Press the ENTER button to confirm your choice.

3. Press the ◄ or ► button to select “Store Demo” or “Home Use”, then the ENTER button. We recommend setting the TV to "Home Use" mode for the best picture in your home

environment. "Store Demo" mode is only intended for use in retail environments. If the unit is accidentally set to “Store Demo” mode and you want to return to “Home Use”

(Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds

4. The message "Check antenna input." is displayed with "OK" selected. Press the ENTER button. Please check that the antenna cable is connected correctly.

5. Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTER button to confirm your choice.

6. The “Auto Store” menu is displayed with the “Start” selected. Press the ENTER button. Press the ENTER button at any time to interrupt the memorization process. The channel search will start and end automatically.

The DTV channel scan menu appears.

♦ If the country is set to “Others”

“Clock Set” screen appears when searching for the analog channel is finished.

If the country is set to “Finland”

♦

Press the

♦

If the country is set to “Sweden”, or “Denmark”

Press the ▲ or ▼ button to select “Cable” or “Aerial”. Press the

ENTER

button to select “Start”.

ENTER

Aerial: scanning for aerial services Cable: scanning for cable services

For detailed descriptions about DTV channel update, refer to page 30 of this manual. If the DTV channel is updated, the Source in the source list of the Input menu is automatically changed to DTV.

After all the available channels are stored, the “Clock Set” menu appears.

8. Press the ENTER button. Select the "Month", "Day", "Year", "Hour", or "Min" by pressing the ◄ or ► button. Set the "Month", "Day", "Year", "Hour", or "Min" by pressing the ▲ or ▼ button. You can also set the “Month”, “Day”, “Year”, “Hour” and "Min" by pressing the number buttons on

the remote control.

Plug & Play

Start Plug & Play.

Enter

button.

English - 10

9. Press the ENTER button to confirm your setting. The message “Enjoy your viewing” is displayed.

When you have finished, press the

ENTER button.

Even if the ENTER button is not pressed, the message will automatically disappear after

several seconds.

 Language  Country  Auto Store  Clock Set

: Select your language.

: Select your country.

: Automatically scans for and stores channels available in the local area.

: Sets the current time for the TV clock.

If you want to reset this feature...

Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Setup" then press the

ENTER button.

Plug & Play  Language : English  Time  Melody : Off  Entertainment : Off  Energy Saving : Off 

Setup

2. Press the ENTER button again, to select "Plug & Play".

For further details on setting up options, refer to the page 10.

The “Plug & Play” feature is only available in the TV mode.

➣

Move Enter Return

Storing Channels Automatically

You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However, you can sort numbers manually and clear any channels you do not wish to

Country : Finland  Auto Store  Manual Store  Channel Manager  Sort  Name  Fine Tune 

watch.

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Channel", then press the

ENTER button.

Move Enter Return

2. Press the ENTER button to select "Country".

3. Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTER button to confirm your choice.

➣

Even though you have changed the country setting in this menu, the country setting for DTV is not changed. (Refer to page 29)

4. Press the ▲ or ▼ button to select "Auto Store", then press the ENTER button.

Press the ENTER button.

The TV will begin memorizing all of the available channels.

➣

Press the

➣

ENTER button at any time to interrupt the memorization process and return to the

"Channel" menu.

After all the available channels are stored, the "Sort" menu appears. (refer to page 14)

Channel

English - 11

Storing Channels Manually

Not available in DTV or external input mode.

You can store television channels, including those received via cable networks. When storing channels manually, you can choose:

♦ Whether or not to store each of the channels found.

Country : Finland  Auto Store  Manual Store  Channel Manager  Sort  Name  Fine Tune 

Channel

♦ The programme number of each stored channel which you wish

to identify.

Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Channel", then press the

ENTER button.

2. Press the ▲ or ▼ button to select "Manual Store", then press the ENTER button.

3. Select the required option by pressing the ▲ or ▼ button,

Move Enter Return

Programme : P 1 Colour System : Auto  Sound System : BG  Channel : S 6 Search : 140 MHz Store : ?

Manual Store

then press the ENTER button.

4. When you are satisfied with your setting, press the ENTER button.

Press the EXIT button to exit.

Move Enter Return

♦ Programme (Programme number to be assigned to a channel)

− Press the ▲ or ▼ button until you find the correct number.

You can also select the channel number directly by pressing the numeric buttons (0~9).

Colour System: Auto/PAL/SECAM/NTSC4.43

♦

− Press the ▲ or ▼ button to select the required colour standard.

♦

Sound System: BG/DK/I/L

− Press the ▲ or ▼ button to select the required sound standard.

 Channel (When you know the number of the channel to be stored)

♦

− Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel).

− Press the ► button, then press the ▲ or ▼ button to select the required number.

You can also select the channel number directly by pressing the numeric buttons (0~9). If there is abnormal sound or no sound, re-select the sound standard required.

 Search (When you do not know the channel numbers)

♦

− Press the ▲ or ▼ button to start the search.

− The tuner scans the frequency range until the first channel or the channel that you selected is

received on the screen.

♦

Store (When you store the channel and associated programme number)

− Set to "OK" by pressing the ENTER button.

Channel mode

− P (Programme mode): When completing tuning, the broadcasting stations in your area have been

assigned to position numbers from P00 to P99. You can select a channel by entering the position number in this mode.

− C (Air channel mode): You can select a channel by entering the assigned number to each air

broadcasting station in this mode.

− S (Cable channel mode): You can select a channel by entering the assigned number for each

cable channel in this mode.

English - 12

Adding / Locking Channels

Not available in DTV or external input mode.

➣

Using the Channel Manager, you can conveniently lock or add channels.

Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Channel", then press the

ENTER button.

2. Press the ▲ or ▼ button to select "Channel Manager", then press the ENTER button.

♦ Adding channels

Using the Channel List, you can add channels.

3. Select "Channel List" by pressing the ENTER button.

4. Move to the ( ) field by pressing the ▲, ▼, ◄ or ►

button, select a channel to be added, and press the

ENTER button to add the channel.

If you press the

➣

next to the channel disappears and the channel is not added.

" is active when "Child Lock" is selected to "On".

➣

♦ Locking channels

This feature allows you to prevent unauthorized users, such

as children, from watching unsuitable programmes by muting out video and audio.

Press the ▲ or ▼ button to select "Child Lock", then press

the ENTER button.

Select "On" by pressing the ▲ or ▼ button, then press the

ENTER button.

Press the ▲ or ▼ button to select "Channel List",

then press the ENTER button.

8. Move to the " " field by pressing the ▲, ▼, ◄ or ► button, select a channel to be locked, and press the ENTER button.

If you press the

➣

next to the channel disappears and the channel lock is cancelled. A blue screen is displayed when "Child Lock" is activated.

➣

Press the EXIT button to exit.

Select "On" or "Off" in "Child Lock" to easily turn the

➣

channels which selected on " " to be active or inactive.

ENTER button again, the ( ) symbol

Country : Finland  Auto Store  Manual Store  Channel Manager  Sort  Name  Fine Tune 

Move Enter Return

Channel List  Child Lock : Off 

Move Enter Return

P 1 C3

Prog.

0 C-1 C3 2 BBC 1 3 C74 4 C75 5 C76 6 S3 7 S4 8 S6 9 S7

Add Lock

Move Enter

Page Return

Channel

Channel Manager

Channel List

1 / 10

You can select these options by simply pressing the CH LIST

button on the remote control.

English - 13

Sorting the Stored Channels

This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using the auto store.

Not available in DTV or external input mode.

➣

Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Channel", then press the

ENTER button.

2. Press the ▲ or ▼ button to select "Sort", then press the ENTER button.

3. Select the channel number that you wish to change by

pressing the ▲ or ▼ button. Press the ENTER button.

The selected channel number and name are moved to

➣

right side.

4. Select the number of the programme to which the channel is

to be moved by pressing the ▲ or ▼ button.

5. Press the ENTER button. The channel is moved to its new

position and all other channels are shifted accordingly.

6. Repeat steps 3 to 5 for another channel to be sorted.

Press the EXIT button to exit.

Assigning Channels Names

Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names.

Not available in DTV or external input mode.

➣

1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the

ENTER button.

2. Press the ▲ or ▼ button to select "Name", then press the ENTER button.

3. If necessary, select the channel to be assigned to a new

name by pressing the ▲ or ▼ button. Press the ENTER button.

➣

The selection bar is displayed around the name box.

4. To...

Select a letter, number or symbol Move on the next letter Move back the previous letter Confirm the name

➣

The following characters are available: Letters of the alphabet (A~Z) / Numbers (0~9) / Special characters (+, -, *, /, space)

Repeat steps 3 to 4 for each channel to be assigned to a new name.

Press the EXIT button to exit.

Then...

Press the ▲ or ▼ button Press the ► button Press the ◄ button

ENTER button

Press the

Country : Finland  Auto Store  Manual Store  Channel Manager  Sort  Name  Fine Tune 

Move Enter Return

Prog. Ch. Name  0 C-- ---- 1 C23 -----  2 S06 ---- 3 S07 ---- 4 S09 ---- 5 S12 ---- 6 S13 ---- 7 S14 ---- 8 S17 ---- 9 C21 ---- 

Move Enter Return

Country : Finland  Auto Store  Manual Store  Channel Manager  Sort  Name  Fine Tune 

Move Enter Return

Prog. Ch. Name  0 C-- -----

1 C23 -----

2 S06 ---- 3 S07 ---- 4 S09 ---- 5 S12 ---- 6 S13 ---- 7 S14 ---- 8 S17 ---- 9 C21 ---- 

Move Enter Return

Channel

Sort

Name

English - 14

Fine Tuning Channel Reception

Use fine tuning to manually adjust a particular channel for optimal reception.

Not available in DTV or external input mode.

➣

Use the number buttons to directly select the channel that

you want to fine tune.

2. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Channel", then press the

ENTER button.

3. Press the ▲ or ▼ button to select "Fine Tune", then press

the ENTER button.

4. Press the ◄ or ► button to adjust the fine tuning.

Press the ENTER button.

Press the EXIT button to exit.

Fine tuned channels that have been saved are marked

➣

with an asterisk " number in the channel banner. And the channel number

" on the right-hand side of the channel

turns red. To reset the ne-tuning, select "Reset" by pressing the

➣

▲

or ▼ button and then press the ENTER button.

Country : Finland  Auto Store  Manual Store  Channel Manager  Sort  Name  Fine Tune 

Move Enter Return

P 1

Adjust Save Return

Channel

Fine Tune

Reset

English - 15

Changing the Picture Standard

You can select the type of picture which best corresponds to your viewing requirements.

Press the MENU button to display the menu.

Press the ENTER button, to select "Picture".

2. Press the ENTER button again, to select "Mode".

3. Press the ▲ or ▼ button to select the desired picture effect.

Press the ENTER button.

4. Press the EXIT button to exit.

♦ Dynamic: Selects the picture for high-definition in a bright

♦ Standard:

♦ Movie:

The Picture mode must be adjusted separately for each

input source.

room.

Selects the picture for optimum display in a

normal environment.

Selects the picture for comfortable display in a

dark room.

Mode : Standard  Backlight 7 Contrast 95 Brightness 45 Sharpness 50 Colour 50

Tint G 50 R 50

Detailed Settings  Picture Options  Reset : OK 

Move Enter Return

Mode : Standard

Backlight 7 Contrast 95 Brightness 45 Sharpness 50 Colour 50

Tint G 50 R 50

Detailed Settings Picture Options Reset : OK

Move Enter Return

Picture

Dynamic

Standard

Movie

Easy Setting

Press the TOOLS button on the remote control.

2. Press the ▲ or ▼ button to select "Picture Mode".

3. Press the ◄ or ► button to select the required option.

4. Press the EXIT or TOOLS button to exit.

Tools

Anynet+ (HDMI-CEC)

Picture Mode ◄ Standard ►

Sound Mode : Custom Sleep Timer : Off SRS TS XT : Off Energy Saving : Off Dual l-ll : Mono

Move Adjust Exit

English - 16

Adjusting the Custom Picture

Your set has several settings which allow you to control picture quality.

To select the desired picture effect, follow the

"Changing the Picture Standard" instructions number 1 to 3.

(On page 16)

2. Press the ▲ or ▼ button to select a particular item. Press the

ENTER button.

3. Press the ◄ or ► button to decrease or increase the value of

a particular item. Press the ENTER button.

4. Press the EXIT button to exit.

♦ Backlight: Adjusts the screen brightness by adjusting the

LCD backlight brightness. (0~10)

♦ Contrast:

Adjusts the lightness and darkness between

objects and the background.

♦

Brightness: Adjusts the brightness of the whole screen.

♦ Sharpness:

Adjusts the outline of objects to either

sharpen them or make them more dull.

♦

Colour: Adjusts the colours, making them lighter or

darker.

♦ Tint:

Adjusts the colour of objects, making them more red or green for a more natural look.

The adjusted values are stored according to the selected Picture mode.

In PC mode, you can only make changes to "Backlight", "Contrast" and "Brightness". (26, 32, 37 inch)

In PC mode, you can only make changes to "Contrast" and "Brightness".

In Analogue TV, Ext., AV, S-Video modes of the PAL system, you cannot use the "Tint" Function. You can return to the factory defaults picture settings by selecting the "Reset".

(Refer to "Resetting the Picture Settings to the Factory Defaults" on page 18)

The energy consumed during use can be significantly reduced if the level of brightness of the picture

is reduced, and that this will reduce the overall running cost.

Mode : Standard  Backlight 7 Contrast 95 Brightness 45 Sharpness 50 Colour 50

Tint G 50 R 50

Detailed Settings  Picture Options  Reset : OK 

Move Enter Return

▲

Backlight

▼

Move Adjust Return

(40 inch)

Picture

Conguring Detailed Settings on the Picture

You can set detailed picture settings.

1. Press the MENU button to display the menu.

Press the

ENTER button, to select "Picture".

2. Press the ENTER button to select “Mode”.

Press the ▲ or ▼ button to select “Standard” or “Movie”, then

press the

ENTER button.

3. Press the ▲ or ▼ button to select "Detailed Settings", then

press the ENTER button.

4. Select the required option by pressing the ▲ or ▼ button,

then press the ENTER button.

When you are satisfied with your setting, press the

ENTER button.

Press the EXIT button to exit.

"Detailed Settings" is available in "Standard" or "Movie"

➣

mode. In PC mode, you can only make changes to

➣

“Dynamic Contrast”, “Gamma” and “White Balance” from among the “Detailed Settings” items.

English - 17

Mode : Standard  Backlight 7 Contrast 95 Brightness 45 Sharpness 50 Colour 50

Tint G 50 R 50

Detailed Settings  Picture Options  Reset : OK 

Move Enter Return

Black Adjust : Off  Dynamic Contrast Gamma : 0  Colour Space White Balance  Flesh Tone : 0  Edge Enhancement : On 

Move Enter Return

Picture

Detailed Settings

: Medium 

: Native 

♦ Black Adjust: Off/Low/Medium/High You can directly select the black level on the screen to adjust the screen depth.

♦ Dynamic Contrast: Off/Low/Medium/High You can adjust the screen contrast so that the optimal contrast is provided.

♦ Gamma: -3 ~ +3 You can adjust the Primary Colour (Red, Green, Blue) Intensity.

Press the ◄ or ► button until you reach the optimal setting. ♦ Colour Space: Auto/Native/Custom

Colour space is a Colour matrix composed of red, green and blue colours.

Select your favourite Colour space to experience the most natural Colour.

♦ Auto: Auto Color Space automatically adjusts to the most natural color tone based on program

sources.

♦ Native: Native Color Space offers deep and rich color tone. ♦ Custom: Adjusts the color range to suit your preference.

Customizing the Colour Space

Colour: Red/Green/Blue/Yellow/Cyan/Magenta

Adjusts the Colour range to suit your preference.

“Colour” is available when “Colour Space” is set to “Custom”. Press the ▲ or ▼ button to select “Red”, “Green”, “Blue”, “Yellow”, “Cyan” or “Magenta”.

Press the

ENTER button.

Red/Green/Blue: In "Colour", you can adjust the RGB values for the selected colour.

Press the ▲ or ▼ button to select "Red", "Green" or "Blue" to change it. Press the

button.

ENTER

Press the ◄ or ► button to decrease or increase the value of a particular item. Press the

ENTER button.

Reset: Resets the colour space to the default values.

♦ White Balance: R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain/Reset You can adjust the colour temperature for more natural picture colours. R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain: Changing the adjustment value will refresh the adjusted screen.

Select the required option by pressing the ▲ or ▼ button, then press the ENTER button. Press the ◄ or ► button until you reach the optimal setting.

Reset: The previously adjusted white balance will be reset to the factory defaults.

Flesh Tone: -15 ~ +15

♦

You can emphasize the pink 'flesh tone' in the picture.

Press the ◄ or ► button until you reach the optimal setting.

Changing the adjustment value will refresh the adjusted screen.

Edge Enhancement: Off/On

♦

You can emphasize object boundaries in the picture.

Resetting the Picture Settings to the Factory Defaults

You can return to the factory defaults picture settings.

To select the desired picture effect, follow the

"Changing the Picture Standard" instructions number 1 to 3 on page 16.

2. Press the ▲ or ▼ button to select "Reset", then press the

ENTER button.

3. Press the ▲ or ▼ button to select "OK" or "Cancel".

Press the ENTER button.

4. Press the EXIT button to exit.

The "Reset" will be set for each Picture mode.

English - 18

Mode : Standard Backlight 7 Contrast 95 Brightness 45 Sharpness 50 Colour 50

Tint G 50 R 50

Detailed Settings Picture Options

Reset : OK

Move Enter Return

Picture

Cancel

Changing the Picture Options

1. Press the MENU button to display the menu. Press the ENTER button, to select "Picture".

2. Press the ▲ or ▼ button to select “Picture Options”, then press the ENTER button.

3. Select the required option by pressing the ▲ or ▼ button,

then press the ENTER button.

Mode : Standard  Backlight 7 Contrast 95 Brightness 45 Sharpness 50 Colour 50

Tint G 50 R 50

Detailed Settings  Picture Options  Reset : OK 

Picture

4. When you are satisfied with your setting, press the

ENTER button.

Press the EXIT button to exit.

➣

In PC mode, you can only make changes to the

“Colour Tone” and “Size” from among the items in “Picture Options”.

Colour Tone: Cool2/Cool1/Normal/Warm1/Warm2

♦

Move Enter Return

Picture Options

Colour Tone : Normal  Size : Auto Wide  Screen Mode : 16:9  Digital NR : Auto 

DNle : Off  HDMI Black Level

Blue Only Mode : Off 

You can select the most comfortable colour tone to your eyes.

The adjusted values are stored according to the selected

➣

Picture mode.

“Warm1” or “Warm2” is only activated when the picture mode is "Movie".

➣

Size: Auto Wide/16:9/Wide Zoom/Zoom/4:3/Just Scan

♦

Move Enter Return

You can select the picture size which best corresponds to your viewing requirements.

♦ Auto Wide: Automatically adjusts the picture size to the "16:9" aspect ratio. ♦ 16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting. ♦ Wide Zoom: Magnify the size of the picture more than 4:3. ♦ Zoom

: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.

♦ 4:3: This is the default setting for a video movie or normal broadcasting. ♦ Just Scan: Use the function to see the full image without any cutoff when HDMI (720p/1080i) or

Component (1080i) signals are input.

"Auto Wide" function is available only in "TV", "DTV", "Ext.1", "Ext.2", "AV", and "S-Video" mode.

➣

In PC Mode, only "16:9" and "4:3" mode can be adjusted.

➣

Settings can be adjusted and stored for each external device you have connected to an input of

➣

the TV. Temporary image retention may occur when viewing a static image on the set for more than two

➣

hours.

Wide Zoom

➣

: Move the screen up/down using the ▲ or ▼ button after selecting the by

pressing the ► or ENTER button.

Zoom

➣

: Select by pressing the ◄ or ►button.

Use the ▲ or ▼button to move the picture up and down. After selecting

use the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction.

➣

After selecting “Just Scan” in HDMI (1080i) or Component (1080i) mode: Select

by pressing the ◄ or ►button. Use the ▲, ▼, ◄ or ► button to move the picture.

Reset: Press the ◄ or ► button to select “Reset”, then press the ENTER button. You can initialize the setting.

: Normal 

O You can select these options by simply pressing the P.SIZE

button on the remote control.

English - 19

♦ Screen Mode

: 16:9/ Wide Zoom/Zoom/4:3

When setting the picture size to "Auto Wide" in a 16:9 wide TV, you can determine the picture size

you want to see the 4:3 WSS (Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function is intended for users to select it.

♦ 16:9: Sets the picture to 16:9 wide mode ♦ Wide Zoom: Magnify the size of the picture more than 4:3. ♦ Zoom

: Magnify the size of the picture vertically on screen.

♦ 4:3: Sets the picture to 4:3 normal mode.

This function is available in "Auto Wide" mode. This function is not available in "Component" or "HDMI" mode.

♦

Digital NR: Off/Low/Medium/High/Auto

If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction

feature to help reduce any static and ghosting that may appear on the screen.

When the signal is weak, select one of the other options until the best picture is displayed.

♦

DNIe: Off/Demo/On

This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you

can view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the applied DNIe and normal pictures on the screen, for demonstration purposes. Using this function, you can view the difference in the visual quality.

DNIe™ (Digital Natural Image engine)

This feature brings you more detailed image with 3D noise reduction, detail enhancement,

contrast enhancement and white enhancement. New image compensation Algorithm gives brighter, clearer, more detailed image to you. DNIe™ technology will fit every signal into your eyes.

“DNIe” is only available in “Dynamic” mode.

♦ HDMI Black Level: Normal/Low You can select the black level on the screen to adjust the screen depth.

This function is active only when the external input connects to HDMI(RGB signals).

♦ Blue Only Mode: Off/On This function is for AV device measurement experts. This function displays the blue signal only by

removing the red and green signals from the video signal so as to provide a Blue Filter effect that is used to adjust the Colour and Tint of video equipment such as DVD players, Home Theaters, etc.

Using this function, you can adjust the Colour and Tint to preferred values appropriate to the signal

level of each video device using the Red/Green/Blue/Cyan/Magenta/Yellow Colour Bar Patterns, without using an additional Blue Filter.

“Blue Only Mode” is available when the picture mode is set to “Movie” or “Standard”.

English - 20

Sound Features

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Sound", then press the

ENTER button.

2. Select the required option by pressing the ▲ or ▼ button,

Mode : Custom  Equalizer  SRS TS XT : Off  Auto Volume : Off  TV Speaker : On 

Sound

then press the ENTER button.

3. When you are satisfied with your setting, press the ENTER

button.

4. Press the EXIT button to exit.

♦ Mode: Standard/Music/Movie/Speech/Custom

You can select the type of special sound effect to be used

when watching a given broadcast.

Easy Setting

1. Press the

TOOLS button on the remote control.

2. Press the ▲ or ▼ button to select "Sound Mode".

3. Press the ◄ or ► button to select the desired sound mode.

4. Press the EXIT or TOOLS button to exit.

♦ Equalizer: Balance/100Hz/300Hz/1kHz/3kHz/10kHz

The sound settings can be adjusted to suit your personal

Move Enter Return

Tools

Anynet+ (HDMI-CEC) Picture Mode : Standard

Sound Mode ◄ Custom ►

Sleep Timer : Off SRS TS XT : Off Energy Saving : Off Dual l-ll : Mono

Move Adjust Exit

Equalizer

preferences.

➣

If you make any changes to these settings, the sound mode is automatically switched to "Custom".

Balance 100Hz 300Hz 1kHz 3kHz 10kHz

Move Adjust Return

♦ SRS TS XT: Off/On

TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel

content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats.

Easy Setting

Press the TOOLS button on the remote control.

2. Press the ▲ or ▼ button to select "SRS TS XT".

3. Press the ◄ or ► button to select the "Off" or "On".

4. Press the EXIT or TOOLS button to exit.

Anynet+ (HDMI-CEC) Picture Mode : Standard Sound Mode : Custom Sleep Timer : Off

SRS TS XT ◄ Off ►

Energy Saving : Off Dual l-ll : Mono

Tools

Move Adjust Exit

TruSurround XT, SRS and Symbol are trademarks of SRS Labs,

Inc.TruSurround XT technology is incorporated under license from SRS Labs, Inc.

English - 21

♦ Auto Volume: Off/On

Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume

every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.

♦ TV Speaker: Off/On

If you want to hear the sound through separate speakers, cancel the internal amplifier.

The +, - and MUTE buttons do not operate when the "TV Speaker" is set to "Off".

➣ ➣

When "TV Speaker" is set to "Off", the Sound menus cannot be adjusted.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Selecting the Sound Mode

You can set the sound mode in the "Tools" menu. When you set to "Dual I-II", the current sound mode is displayed on the screen.

Press the TOOLS button on the remote control.

2. Press the ▲ or ▼ button to select “Dual I-II".

3. Press the ◄ or ► button to select required option.

4. Press the ENTER button.

Stereo

NICAM Stereo

Audio Type Dual

Mono MONO

Stereo STEREO

Dual DUAL

Mono MONO

Stereo MONO

Dual

MONO

↔

1 ↔

↔

DUAL

1/2

MONO

DUAL

STEREO

DUAL

Default

Automatic

change

DUAL 1

Automatic

change

DUAL 1

If the stereo signal is weak and an automatic switching occurs,

then switch to the Mono.

This function is only activated in stereo sound signal. It is

deactivated in mono sound signal.

This function is only available in Analogue TV mode.

Anynet+ (HDMI-CEC) Picture Mode : Standard Sound Mode : Custom Sleep Timer : Off SRS TS XT : Off Energy Saving : Off

Dual l-ll ◄ Mono ►

Move Adjust Exit

Tools

Connecting Headphones (Sold separately)

You can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room.

When you insert the head set jack into the corresponding port, you

➣

can operate only "Auto Volume" in Sound menu. Prolonged use of headphones at a high volume may damage your

➣

hearing. You will not receive sound from the speakers when you connect headphones to the system.

➣

The headphone volume and TV volume are adjusted differently.

➣

English - 22

TV Side Panel

Setting and Displaying the Current Time

You can set the TV’s clock so that the current time is displayed when you press the INFO button. You must also set the time if you wish to use the automatic On/Off timers.

Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Setup", then press the

ENTER button.

2. Press the ▲ or ▼ button to select "Time", then press the

ENTER button.

3. Press the ENTER button to select "Clock Set".

To... Press the...

Move to "Month", "Day", "Year", "Hour" or "Minute" Set the "Month", "Day", "Year", "Hour" or "Minute"

Confirm the setting

◄ or ► button.

▲ or ▼ button.

ENTER button.

5. Press the EXIT button to exit.

If you disconnect the power cord, you have to set the clock again. You can also set "Year", "Month", "Day", "Hour" and "Minute" by pressing the number buttons on

the remote control.

Plug & Play  Language : English  Time  Melody : Off  Entertainment : Off  Energy Saving : Off 

Move Enter Return

Month01Day

Hour00Minute

Move Adjust Return

Setting the Sleep Timer

Setup

Clock Set

Year

2008

You can select a time period of between 30 and 180 minutes after which the television automatically switches to standby mode.

Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Setup", then press the

ENTER button.

2. Press the ▲ or ▼ button to select "Time", then press the

ENTER button.

3. Press the ▲ or ▼ button to select "Sleep Timer", then press

the ENTER button.

4. Press the ▲ or ▼ button repeatedly until the desired time

appears (Off, 30, 60, 90, 120, 150, 180). Press the ENTER button.

Press the EXIT button to exit.

The TV automatically switches to standby mode when the

timer reaches 0.

Easy Setting

Press the TOOLS button on the remote control.

2. Press the ▲ or ▼ button to select “Sleep Timer”.

3. Press the ◄ or ► button to select the minute.

4. Press the EXIT or TOOLS button to exit.

English - 23

Plug & Play  Language : English  Time  Melody : Off  Entertainment : Off  Energy Saving : Off 

Move Enter Return

Clock Set : 00 : 00

Sleep Timer :

Timer 1 : Timer 2 : Timer 3 :

Move Enter Return

Anynet+ (HDMI-CEC) Picture Mode : Standard Sound Mode : Custom

Sleep Timer ◄ Off ►

SRS TS XT : Off Energy Saving : Off Dual l-ll : Mono

Move Adjust Exit

Tools

Setup

Time

Off

30 60

90 120 150 180

Switching the Television On and Off Automatically

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Setup", then press the

ENTER button.

2. Press the ▲ or ▼ button to select "Time", then press the ENTER button.

Plug & Play  Language : English  Time  Melody : Off  Entertainment : Off  Energy Saving : Off 

3. Press the ▲ or ▼ button to select "Timer 1", "Timer 2",

"Timer 3", then press the ENTER button. Three different On/Off Timer Settings can be made.

You must set the clock first.

➣

4. Press the ◄ or ► button to select the required item below.

Press the ▲ or ▼ button to adjust to the setting satisfied. ♦ On Time: Select hour, minute, and "On"/"Off". (To activate

timer with the setting satisfied, set to "On".)

♦ Off Time: Select hour, minute, and "On"/"Off". (To activate

timer with the setting satisfied, set to "On".)

♦ Repeat: Select "Once", "Everyday", "Mon~Fri", "Mon~Sat",

Move Enter Return

On Time

00 00 Off

Off Time

00 Off

Repeat

Once

Volume

► Move Adjust Return

Timer 1

or "Sat~Sun".

♦ Volume: Select the desired turn on volume level.

You can set the hour and minute directly by pressing the number buttons on the remote control. Auto Power Off

When you set the timer On, the TV will eventually turn off, if no controls are operated for 3 hours after the TV was turned on by timer. This function is only available in timer On mode and prevents overheating, which may occur if a TV is on for too long time.

Choosing Your Language

Setup

When you start using your set for the first time, you must select the language which will be used for displaying menus and indications.

Press the MENU button to display the on-screen menu.

Press the ▲ or ▼ button to select "Setup", then press the

ENTER button.

2. Press the ▲ or ▼ button to select "Language", then press the ENTER button.

3. Select a particular language by pressing the ▲ or ▼ button

repeatedly. Press the ENTER button.

4. Press the EXIT button to exit.

English - 24

Plug & Play  Language : English  Time  Melody : Off  Entertainment : Off  Energy Saving : Off 

Move Enter Return

Setup

Melody / Entertainment / Energy Saving

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Setup", then press the

ENTER button.

2. Select the required option by pressing the ▲ or ▼ button,

Plug & Play  Language : English  Time  Melody : Off  Entertainment : Off  Energy Saving : Off 

Setup

then press the ENTER button.

3. When you are satisfied with your setting, press the ENTER button.

4. Press the EXIT button to exit.

Move Enter Return

♦ Melody: Off/Low/Medium/High

The TV power on/off melody sound can be adjusted.

The Melody does not play

➣

- When no sound is output from the TV because the MUTE button has been pressed.

- When no sound is output from the TV because the (Volume) button has been pressed.

- When the TV is turned off by Sleep Timer function.

♦ Entertainment: Off/Sports/Cinema/Game

The “Entertainment” mode enables you to select the optimal display and sound for sports, cinema

and games.

- Off: Switch the "Entertainment" function off.

- Sports: Provides the optimal picture and sound quality for sports. You can enjoy more thrilling

Colour and sound.

- Cinema: Provides the optimal picture and sound quality for cinema. You can experience a richer

picture and enhanced sound.

- Game: Provides the optimal picture and sound quality for games. This mode accelerates the

playing speed when using an external game console connected to the TV.

If you set any of the three “Entertainment” modes to On, the settings will be locked and can not

➣

be adjusted. If you want to make Picture and Sound mode adjustments, the “Entertainment”

mode must be turned off.

➣

The “Entertainment” settings are saved for each input source.

➣

If you set any of the three “Entertainment” modes to On, “SRS TS XT” function is not available.

O You can press the E.MODE button on the remote control

repeatedly to change the “Entertainment” setting.

English - 25

♦ Energy Saving: Off/Low/Medium/High/Auto

This feature adjusts the screen brightness depending on the surrounding lighting conditions.

− Off: Turns off the energy saving function.

− Low: Sets the TV to low energy saving mode.

− Medium: Sets the TV to medium energy saving mode.

− High: Sets the TV to high energy saving mode.

− Auto: Automatically adjusts the brightness of the TV screen in accordance with the scenes.

Easy Setting

1. Press the

TOOLS button on the remote control.

2. Press the ▲ or ▼ button to select “Energy Saving”.

3. Press the ◄ or ► button to select the "Off","Low",

"Medium", "High" or "Auto".

4. Press the EXIT or TOOLS button to exit.

This function is not available in “PC” mode.(40 inch)

Selecting the Source

You can select among external sources connected to your TV’s input jacks.

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Input", then press the

ENTER button.

2. Press the ENTER button again, to select "Source List".

Available signal sources: TV, Ext.1, Ext.2, AV, S-Video,

Component, PC, HDMI1, HDMI2, HDMI3, DTV.

You can choose only those external devices that are

connected to the TV.

3. Select the required device by pressing the ▲ or ▼ button.

Press the ENTER button.

Press the SOURCE button on the remote control to toggle

between all the available source. TV mode can be selected by pressing the TV/DTV button, number buttons(0~9), and the P / button on the remote control.

Tools

Anynet+ (HDMI-CEC) Picture Mode : Standard Sound Mode : Custom Sleep Timer : Off SRS TS XT : Off

Energy Saving ◄ Off ►

Dual l-ll : Mono

Move Adjust Exit

Source List : TV  Edit Name  Anynet+(HDMI-CEC) 

Move Enter Return

Ext.1 : ---Ext.2 : ----

AV : ---S-Video : ---Component : ---PC : ---HDMI1 : ---HDMI2 : ---HDMI3 : ----

DTV

Move Enter Return

Input

Source List

You can also watch HDMI mode simply by pressing the HDMI

button on the remote control.

English - 26

Editing the Input Source Names

Name the device connected to the input jacks to make your input source selection easier.

Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Input", then press the

ENTER button.

2. Press the ▲ or ▼ button to select "Edit Name", then press the ENTER button.

3. Press the ▲ or ▼ button to select the device that you wish to

edit. Press the ENTER button.

4. Press the ▲ or ▼ button to select the required device. Press the ENTER button.

Press the EXIT button to exit.

Source List : TV  Edit Name  Anynet+(HDMI-CEC) 

Move Enter Return

Ext.1 : ----

Ext.2 : ---- AV : ---- S-Video : ---- Component : ---- PC : ---- HDMI1 : ---- HDMI2 : ---- HDMI3 : ----

Edit Name

Move Enter Return

Input

----

VCR DVD

Cable STB

Satellite STB

PVR STB

AV Receiver

Game

English - 27

Previewing the DTV Menu System

♦ This product is only applicable to Finnish, Swedish and Danish

broadcasts. Broadcasts are not supported in other countries.

Available in DTV mode. Preset to the DTV mode by using the

♦

TV/DTV button on your remote control. To help you navigate around the on-screen menu system and adjust the various settings available, refer to the following illustration.

Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Digital Menu", then press the

ENTER button.

Guide Now & Next Guide

Full Guide Scheduled List Default Guide

Now/Next, Full Guide

Digital Channel Country

Auto Store Manual Store Edit Favourite Channels Channel List

All, Favourites, Default

Setup Menu Transparency

High, Medium, Low, Opaque Change PIN Parental Lock Subtitle Subtitle Mode Audio Format Audio Description

Common Interface System

Off, On

Normal, Hard of hearing

PCM, Dolby Digital

Audio Description Off, On

Volume

Application Info, CI Menu

Product Information

Signal Information

Software Upgrade

Reset

Language Audio Language

Subtitle Language Teletext Language Preference

Primary Audio Language

Secondary Audio Language

Primary Subtitle Language

Secondary Subtitle Language

Primary Teletext Language

Secondary Teletext Language (depending on the country)

Guide Digital Channel Setup Language

DTV

Now & Next Guide Full Guide Scheduled List  Default Guide : Full Guide 

DTV

Country :Finland  Auto Store  Manual Store  Edit Favourite Channels  Channel List 

DTV

Menu Transparency Change PIN  Parental Lock  Subtitle : Off 

Subtitle Mode 



DTV

Audio Language Subtitle Language Teletext Language Preference 

Digital Menu

Move Enter Return

Channel

Move Enter Return

Language

Move Enter Return

Guide

Setup : Medium



The sub-items of the CI Menu may vary depending on the CAM model.

➣

English - 28

Selecting the Country

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Digital Menu", then press

the

ENTER button.

2. Press the

press the

▲ or ▼

button to select "Digital Channel", then

ENTER button.

DTV

Country :Finland  Auto Store  Manual Store  Edit Favourite Channels  Channel List 

3. Press the ENTER button again, to select "Country".

4. Select the appropriate country by pressing the ▲ or ▼ button.

Press the

➣

ENTER

button to conrm your choice.

Even though you have changed the country setting in

Move Enter Return

this menu, the country setting for Analogue TV is not changed.(Refer to page 11)

5. Enter a PIN(Personal ID number) by pressing the number buttons on the remote control.

➣

The “Auto Store” menu appears.

➣

If you change the “Country”, all previous settings will be reset.

Channel

English - 29

Updating the Channel List Automatically

You can update the channel list when the broadcaster adds new Services or if you move the TV to a new location.

1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button.

2. Press the

3. Press the ▲ or ▼ button to select “Auto Store”, then press the ENTER button.

4. The update procedures differ depending on the selected “Country”. Update the channel list by

selecting an appropriate option.

When

♦ Press the ▲ or ▼ button to select “Auto”, “Cable” or “Aerial”.

Press the ENTER button. Press the ENTER button to select “Start”.

➣

• Cable: Scans cable channels.

• Aerial: Scans aerial channels.

➣

♦

When the “Country” was set to “Sweden”, or “Denmark”

Press the ▲ or ▼ button to select “Cable” or “Aerial”.

Press the ENTER button.

▲ or ▼

button to select "Digital Channel", then press the ENTER button.

the “Country” was set to “Finland”

• Auto: Scans channels automatically.

This product cannot scan both cable and aerial channels at the same time.

When it has nished, the number of scanned services

will be displayed. The existing favourite channel list will not be deleted

when the channel list is updated.

DTV

Auto  Cable  Aerial 

DTV

Scanning for aerial digital services...

Services found: 0 Channel: 5

DTV

Cable  Aerial 

Auto Store

Choose system to scan

Move Enter Return

Auto Store

Stop

Enter Return

Auto Store

Choose system to scan

When selecting “Cable”:

- Frequency

: Displays the frequency for the channel.

(Differs in each country)

- Modulation: Displays available modulation values.

- Symbol rate: Displays available symbol rates.

- Network ID: Displays the network identication code. Press the red button to start the scan for digital services.

When it has nished, channels are updated in the channel

list.

When selecting “Aerial”:

Press the

ENTER button to select “Start”.

5. Press the EXIT button to exit.

If the signal status is poor, the “No Service found! Check

➣

the aerial connection” message is displayed.

English - 30

Move Enter Return

DTV

Frequency Modulation

Symbol rate

Network ID

Enter freq. Move Return

DTV

Services found: 0 Channel: -

Enter Return

Auto Store

143000

64QAM

6875

100

Auto Store

Start

KHz

kS/s

Updating the Channel List Manually

You can specify the channel for a fast channel search.

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Digital Menu", then press the

2. Press the

3. Press the

▲ or ▼

button to select "Digital Channel", then press the ENTER button.

▲ or ▼

button to select "Manual Store", then press the ENTER button.

4. The update procedures differ depending on the selected “Country”.

Update the channel list by selecting the appropriate option.

ENTER button.

♦

When

the “Country” was set to “Finland”

Press the ▲ or ▼ button to select “Cable” or “Aerial”, then

press the

ENTER button.

When selecting “Cable”:

- Frequency

: Displays the frequency for the channel. (Differs

in each country)

- Modulation: Displays available modulation values.

- Symbol rate: Displays available symbol rates. Press the red button to start the scan for digital services.

When it has finished, channels are updated in the channel list.

When selecting “Aerial”:

- Channel

: Channel “21” to “69” in sequence are displayed

(depending on the country)

- Frequency

: The frequency available in the Channel group

is displayed.

Bandwidth: The available bandwidths are 8 MHz.

Press the red button to start the scan for digital services.

When it has finished, channels are updated in the channel list.

♦



When the “Country” was set to “Sweden”, or “Denmark”

- Channel: Channel “21” to “69” in sequence are displayed

(depending on the country)

- Frequency

: The frequency available in the Channel group

is displayed.

Bandwidth: The available bandwidths are 8 MHz.

Press the red button to start the scan for digital services.

When it has nished, channels are updated in the channel

list.

DTV

Cable  Aerial 

DTV

Channel

DTV

Channel

Manual Store

Choose system to scan

Move Enter Return

Manual Store

Frequency Modulation

Symbol rate

Enter freq. Move Return

Manual Store

Frequency Bandwidth

▲

177500

▼

Adjust Move Return

Manual Store

Frequency Bandwidth

▲

177500

▼

Adjust Move Return

143000

64QAM

6875

KHz MHz

KHz

kS/s

5. When it has nished, the number of scanned services will be displayed.

6. Press the EXIT button to exit.

English - 31

Editing Your Favourite Channels

You can edit your favourite channels using the four colour buttons.

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Digital Menu", then press the

ENTER button.

2. Press the ▲ or ▼ button to select "

the

ENTER button.

3. Press the ▲ or ▼ button to select "Edit Favourite Channels", then press the ENTER button.

4. Press the red button to display all currently stored channels.

5. Press the ▲ or ▼ button to select a channel you want.

Press the ENTER button.

A "" icon is shown next to the selected channel and the

➣

channel will be added to the favourite channel list.

➣

•

To undo, press the

•

Select All: Select all channels currently displayed.

•

Select None: Deselect all selected channels.

•

Preview: Displays (a) currently selected channel(s).

The Favourite Channels settings have been completed.

➣

ENTER button again.

6. Press the EXIT button to exit.

♦ Add You can use this function when one or more favourite channels

have been selected.

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Digital Menu", then press the

ENTER button.

2. Press the ▲ or ▼ button to select " the ENTER button.

3. Press the ▲ or ▼ button to select "Edit Favourite Channels", then press the ENTER button.

4. Press the red button in the "Edit Favourite Channels" menu.

To add more channels, refer to the step 5 on the previous description.

If you want to check the channel to be stored, press RETURN button. Press the

➣

EXIT button to exit.

• To add all channels to the favourite channel list, press theTo add all channels to the favourite channel list, press the red button.

• To remove all channels, press the green button.To remove all channels, press the green button.

• Preview : Displays (a) currently selected channel(s).

• Press thePress the CH LIST button to display the favourite channel

manager.

Digital Channel

", then press

DTV

Edit Favourite Channels

(no channels)

Move Enter Return

Add Channels

Return

Edit Favourite Channels

2 BBC TWO 5 Five 7 BBC THREE 15 abc1 16 QVC 6

Move Enter Return

Select All Select None Preview

Move Select Return

Edit Favourite Channels

2 BBC TWO ★ 7 BBC THREE ★ 15 abc1 ★

Move Enter Return

Add

Move

Edit Favourite Channels

2 BBC TWO ★ 5 Five 7 BBC THREE ★ 15 abc1 ★ 16 QVC 6

Move Enter Return

Select All Select None Preview

Move Select Return

Renumber

Preview Delete

Return

English - 32

♦ Renumber (depending on the country)

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Digital Menu", then press the

ENTER button.

2. Press the ▲ or ▼ button to select "

Digital Channel

", then press

the ENTER button.

3. Press the ▲ or ▼ button to select "Edit Favourite Channels", then press the ENTER button.

4. Select the required channel using the ▲ or ▼ button.

5. Press the green button.

The space for entering the number is a blank.

➣

6. Enter the new channel number. Press ENTER button to store

or RETURN button to cancel.

Press the ◄ button to delete an entered digit.

➣

If you enter a number already assigned to another channel,

➣

the number is assigned to the selected channel and the previous number assigned to the selected channel is assigned to the other channel. That is, the two numbers are exchanged. The Favourite

➣

Channels are automatically sorted in

ascending order of channel numbers.

Press the EXIT button to exit.

DTV

Edit Favourite Channels

2 BBC TWO ★

BBC THREE ★

-- 15 abc1 ★

Move Enter Return

Edit Return Conrm

♦ Preview

1. In the "Edit Favourite Channels" menu, select the channel to be

previewed by pressing the ▲ or ▼ button.

2. Press the yellow button.

The selected channel is displayed on the screen.

➣

♦ Delete

1. In the "Edit Favourite Channels" menu, select the channel to be

deleted from the favourite channels list by pressing the

▲ or ▼ button.

2. Press the blue button.

The selected channel and number will be deleted.

➣ ➣

To add a deleted channel back in to the favourite channel list, see "Add" on page 32.

English - 33

DTV

Edit Favourite Channels

2 BBC TWO ★ 7 BBC THREE ★ 15 abc1 ★

Add

Renumber

Move Return

Edit Favourite Channels

2 BBC TWO ★ 7 BBC THREE ★

Add

Move Return

Preview Delete

Renumber

Preview Delete

Selecting Channel List

You can exclude the channels you have chosen from the channels you have scanned.When you scan through the stored channels, those you have chosen to skip are not displayed. All channels that you do not specifically choose to skip are displayed during scanning.

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Digital Menu", then press

the ENTER button.

2. Press the ▲ or ▼ button to select "

Digital Channel

", then

Test Card M' v2.0

1 Test Card M' v2.0

3 Vida003b 4 Vida004b 5 vida005b 6 vida006b 15 Ch 15 16 QVC 17 UKTV Gold

Previous Page Next/Page Favourites TV

press the ENTER button.

3. Press the ▲ or ▼ button to select "Channel List". Press the ENTER button.

Press the ▲ or ▼ button to select "All", "Favourites" or "Default". Press the ENTER button.

5. Press the yellow button to toggle between your favourite channels

It can be displayed simply by

pressing the CH LIST button.

and all channels.

Your favourite channels are only displayed if they were

➣

previously set in the "Editing Your Favourite Channels" menu (refer to page 32).

6. Press the red or green button to display the previous or next channel List page.

7. Press the ▲ or ▼ button to select a channel to be tuned.

Press the ENTER button.

The channel number, name and an icon are displayed in the top left corner while changing the

➣

channel. The channel number and name are displayed if the channel is one of the all channels, and a  icon if the channel is one of the favourite channels.

8. Press the blue button to toggle between your "TV", "Radio", "Data/Other" and "All".

9. Press the CH LIST button to exit from the channel List.

Channel List

23 bid-up.tv 25 TCM 26 UKTV Style 27 Discovery 28 DiscoveryH&L 15 Cartoon Nwk 33 Boomerang 55 Ttext Holidays

Move Watch Return

All Channels-All

60 Television X 70 BBC Radio 1 72 BBC Radio 2 73 BBC Radio 3 74 BBC Radio 4 84 heat 91 MOJO 800 ARD-MHP-Data

6 More

1/2

Displaying Programme Information

While viewing a channel, additional information about the current programme may be displayed.

1. While viewing a programme, press the INFO button.

The programme information is displayed.

➣

2. To exit from banner information, press the INFO button.

The information is displayed:

➣

− Parental Rating

− Video Type: SD, HD, Radio

− Audio Type: Mono, Stereo, Dual, Dolby Digital

− Existence of Teletext or DVB Subtitle

− Audio Language

English - 34

1 AFDO,16:9 AFDO 16:9 No Block SD Stereo Subtitle English

Exit

14:30 Sat 1 Sep

AII Channels

14:30~14:33

Contains video with AFD O; coded frame is 16:9

Move Enter Return

Viewing the EPG (Electronic Programme Guide) Information

The EPG (Electronic Programme Guide) information is provided by the broadcasters. Programme entries may appear blank or out of date as a result of the information broadcast on a given channel. The display will dynamically update as soon as new information becomes available.

♦ Now & Next Guide

For the six channels indicated in the left-hand column, displays the Current programme and the Next programme information.

♦ Full Guide

Displays the programme information as time ordered One hour segments. Two hours of programme information is displayed which may be scrolled forwards or backwards in time.

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Digital Menu", then press the

ENTER button.

2. Press the ENTER button, to select "Guide".

3. Press the ▲ or ▼ button to select "Now & Next Guide" or

"Full Guide". Press the ENTER button.

You can also display the guide menu simply by pressing

➣

the GUIDE button.

To... Then...

Watch a programme in the EPG list

If the next programme is selected, it is scheduled with the clock icon displayed. If the cancelled with the clock icon gone. For details about scheduling programmes, refer to the next page.

View programme information

Toggle between the "Now & Next Guide" or "Full Guide"

Display the "Favourites" and the "All Channels" list

Scrolls backwards quickly (24 hours). • Press the yellow button repeatedly.

Scrolls forward quickly (24 hours). • Press the blue button repeatedly.

Exit the guide • Press the

ENTER button is pressed again, the scheduling is

• Select a programme by pressing

the ▲, ▼, ◄, ► button.

ENTER button.

• Press the

• Select a programme of your choice by

pressing the ▲, ▼, ◄, ► button.

• Press the INFO button when the

programme of your choice is highlighted.

• Press the red button repeatedly.

• Press the green button repeatedly.

EXIT button.

All Channels

Watch

Now/Next Favourites -24Hours +24Hours Exit

Now & Next Guide

Full Guide

13:28 Wed 16 Feb

INFO

27 Discovery Extreme Machines: Armoured Cars

Now Next

Full Guide Favourites Exit

27 Discovery Extreme Machines: Armoured Cars

13:00 14:00Today

INFO

➣

The programme title is on the upper part of the screen center. Please click on INFO button for the detailed information. Channel Number, Running Time, Status Bar, Parental Level, Video Quality Information(HD/SD), Sound Modes, Subtitle or Teletext, Languages of Subtitle or Teletext, and brief summary of the highlighted programme are included on the detailed information. "..." will be appeared if the summary is long.

➣

Six channels are displayed. To scroll between channels, move to a channel using the ▲ or ▼ button. To display page by page, use the P

or P> button.

English - 35

Using the Scheduled List

If you make a scheduled viewing list of programs you may like to see, the channel will be automatically switched to the scheduled programme at the scheduled time even if you are watching another programme.

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Digital Menu", then press the

ENTER button.

2. Press the ENTER button, to select "Guide".

3. Press the ▲ or ▼ button to select "Scheduled List", then press the ENTER button.

4. Press the red button.

The channel will be switched to the scheduled programme.

5. Press the ENTER button to select an item and adjust with the ▲ or ▼ button .

You can also set hour and minute by pressing the number

➣

buttons on the remote control.

•

Channel: Set the channel.

•

Time: Set the time.

•

Date: Set Year, Month and Day.

•

Frequency: Set the frequency.

6. After setting the schedule, Press the red button.

7. Press the EXIT button to exit.

•

➣

Save: Save the adjusted schedule.

•

Cancel: Cancel the adjusted schedule.

•

Add Programme: Add a new schedule.

•

Edit: Readjust the selected schedule.

•

Delete: Delete the selected schedule.

("Once", "Daily", or "Weekly")

DTV

(No programmes)

Add Programme

Return

DTV

Tuesday 22 Apr 15:30 ~ 16:00 Once

801 RaiTre

Add Programme Edit Delete

Move Return

DTV

Channel

Time

Date

Frequency

Save Cancel

Adjust Move Return

Scheduled List

802 RaiUno

15 : 20 to -- : --

Tue 22 Apr 2007

Once

Setting the Default Guide

You can preset the default guide style.

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Digital Menu", then press the

ENTER button.

2. Press the ENTER button, to select "Guide".

3. Press the ▲ or ▼ button to select "Default Guide", then press the ENTER button.

4. Select "Now/Next" or "Full Guide" using the ▲ or ▼ button, and press the ENTER button.

5. Press the EXIT button to exit.

English - 36

DTV

Now & Next Guide Full Guide Scheduled List

Default Guide : Full Guide

Guide

Now/Next

Full Guide

Move Enter Return

You can select these options by simply pressing the GUIDE

button on the remote control.

Viewing All Channels and Favourite Channels

In the EPG menu, you can display all channels or favourite channels.

Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Digital Menu", then press the

ENTER button.

2. Press the ENTER button again, to select "Guide".

3. Select the your required guide ("Now & Next Guide" or "Full

All Channels

Guide") by pressing the ▲ or ▼ button.

4. Press the ENTER button.

5. Press the green button.

All the channel lists and the Favourite Channel lists will be toggled.

Select a programme of your choice by pressing the ▲, ▼, ◄, or

Watch

► button.

Press the INFO button to display information about the

highlighted programme.

8. When the Edit Favourite Channels list has not been set up:

•

"The favourites list is empty. Would you like to choose your favourites now?" message is

Today

displayed.

•

Select "Yes". The "Edit Favourite Channels" menu is displayed. If you select "No", all channels will remain unchanged.

• To edit the favourite channels, refer to pageTo edit the favourite channels, refer to page 30 for more

Watch

Now/Next Favourites -24Hours +24Hours Exit

details.

9 . Press the EXIT button to exit.

All Channels" is the list of channels that have been scanned by the channel list update.

➣

" All channels are displayed in the all channel mode.

Favourites" (favourite channels) is the list of channels that has been set in the "Edit Favourite Channels"

➣

" menu (refer to page 32).

Now & Next Guide

27 Discovery Extreme Machines: Armoured Cars

Now Next

Full Guide Favourites Exit

27 Discovery Extreme Machines: Armoured Cars

The favourites list is empty. Would you like to choose your favourites now?

Yes No

Full Guide

13:28 Wed 16 Feb

INFO

13:28 Wed 16 Feb

INFO

Adjusting the Menu Transparency

You can set the Transparency of the menu.

Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Digital Menu", then press the

ENTER button.

2. Press the ▲ or ▼ button to select "Setup", then press the ENTER button.

3. Press the ▲ or ▼ button to select "Menu Transparency" then press the ENTER button.

4. Select the required option ("High", "Medium", "Low", or

"Opaque") by pressing the ▲ or ▼ button, and press the

ENTER button to change the setting.

Press the EXIT button to exit.

English - 37

DTV

Menu Transparency

Change PIN Parental Lock Subtitle : On

Subtitle Mode



Move Enter Return

Setup

: Medium

High

Medium

Low

Opaque

Setting up the Parental Lock

This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programmes by a 4-digit PIN (Personal Identification Number) code that is defined by the user. The on-screen menu will instruct you to assign a PIN code (you can change it later, if necessary).

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Digital Menu", then press the

ENTER button.

2. Press the ▲ or ▼ button to select "Setup", then press the ENTER button.

3. Press the ▲ or ▼ button to select "Parental Lock.", then press the ENTER button.

The "Enter PIN" is displayed.

5. Enter your current 4-digit PIN code by using the numeric buttons (0~9).

The default PIN code for a new TV set is 0000.

➣ ➣

If you enter an invalid PIN code,the "Invalid PIN code. Please try again." message is displayed.

6. Press the ENTER button.

7. Press the ▲ or ▼ button to select the age rating you want to

lock out. Press the

ENTER button.

♦ Change PIN

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Digital Menu", then press the

ENTER button.

2. Press the ▲ or ▼ button to select "Setup", then press the ENTER button.

3. Press the ▲ or ▼ button to select "Change PIN", then press the ENTER button.

➣

The "Enter PIN" is displayed.

4. Enter your current 4-digit PIN code by using the numeric buttons (0~9).

➣

The “Enter New PIN” is displayed.

5. Enter your new PIN code by using the numeric buttons (0~9)

The "Conrm New PIN" is displayed.

➣

6. Re-enter your new PIN code to conrm by using the numeric

buttons (0~9).

The Your PIN code has been changed successfully message

➣

is displayed.

7. Press the ENTER button.

8. Press the EXIT button to exit.

If you forget the PIN code, press the remote control buttons in the following sequence, which

➣

resets the PIN to 0-0-0-0: POWER (Off), MUTE, 8, 2, 4, POWER (On).

DTV

Menu Transparency Change PIN  Parental Lock  Subtitle : Off 

Subtitle Mode 



DTV

Enter PIN

DTV

Parental Rating: No Block

DTV

Menu Transparency Change PIN  Parental Lock  Subtitle : Off 

Subtitle Mode 



DTV

Confirm New PIN

Your PIN code has been changed successfully.

Setup : Medium



Move Enter Return

Parental Lock

Enter PIN Return

Parental Lock

▲

No Block

3 4 5 6 7

Setup : Medium

Change PIN

▼



Move Enter Return

Enter PIN Return

English - 38

Setting the Subtitle

You can activate and deactivate the subtitles.

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Digital Menu", then press the

ENTER button.

2. Press the ▲ or ▼ button to select "Setup", then press the ENTER button.

3. Press the ▲ or ▼ button to select "Subtitle ", then press the ENTER button.

4. Select "On" by pressing the ▲ or ▼ button. Press the ENTER

button.

5. Press the EXIT button to exit.

You can select these options simply by pressing the SUBT. button on the remote control.

DTV

Menu Transparency Change PIN Parental Lock

Subtitle : On

Subtitle Mode : Normal



Move Enter Return

Setup : Medium

Off

Setting the Subtitle Mode

Use this menu to set the Subtitle Mode. "Normal" under the menu is the basic subtitle and "Hard of hearing" is the subtitle for a hearing-impaired person.

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Digital Menu", then press the

ENTER button.

2. Press the ▲ or ▼ button to select "Setup", then press the

ENTER button.

3. Press the ▲ or ▼ button to select "Subtitle Mode", then press the ENTER button.

4. Press the ▲ or ▼ button to select "Normal" or "Hard of hearing". Press the ENTER button.

5. Press the EXIT button to exit.

If the programme you are watching does not support the "Hard of hearing" function, "Normal"

➣

automatically activates even though "Hard of hearing" mode is selected.

DTV

Menu Transparency Change PIN Parental Lock Subtitle : On

Subtitle Mode : Normal



Move Enter Return

Setup : Medium

Normal

Hard of hearing

Selecting the Audio Format

You can only hear Dolby Digital sound through the audio receiver connected through an optical cable. You can only hear PCM sound through the main speaker. When sound is emitted from both the main speaker and the audio receiver, a sound echo may occur due to the decoding speed difference between the main speaker and the audio receiver. In this case, use the internal mute function.

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Digital Menu", then press the

ENTER button.

2. Press the ▲ or ▼ button to select "Setup", then press the ENTER button.

3. Press the ▲ or ▼ button to select "Audio Format", then press the ENTER button.

4. Press the ▲ or ▼ button to select "PCM" or "Dolby Digital". Press the ENTER button.

5. Press the EXIT button to exit.

The Audio Format appears according to the broadcasting signal.

➣

Dolby digital sound is only available when the TV is connected with an external speaker using an optical cable.

English - 39

DTV



Audio Format : PCM  Audio Description

Common Interfece

System

Move Enter Return

Setup



Selecting the Audio Description

This is an auxiliary audio function that provides an additional audio track for visually challenged persons. This function handles the Audio Stream for the AD (Audio Description), when it is sent along with the Main audio from the broadcaster. Users can turn the Audio Description On or Off and control the volume.

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Digital Menu", then press the

ENTER button.

2. Press the ▲ or ▼ button to select "Setup", then press the ENTER button.

3. Press the ▲ or ▼ button to select "Audio Description", then press the ENTER button.

4. Press the ▲ or ▼ button to select "On", then press the ENTER button.

5. Press the ▲ or ▼ button to select "Volume", then press the ENTER button.

"Volume" is active when "Audio Description" is set to "On".

➣

Press the ◄ or ► button until you reach the optimal setting.

Press the ENTER button.

7. Press the EXIT button to exit.

DTV



Audio Format : PCM  Audio Description

Common Interfece

System

Move Enter Return

DTV

Audio Description

Volume

Move Enter Return

Audio Description Audio Description Volume

Move Enter Return

Setup



: On

Off

: On

100

Viewing Product Information

You can view your product information. For service or repair, please contact a Samsung approved dealer.

Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Digital Menu", then press the

ENTER button.

Press the ▲ or ▼ button to select "Setup", then press the

ENTER button.

3. Press the the ENTER button.

4. Press the ENTER button again, to select "Product

Information".

➣

5. Press the EXIT button to exit.

▲ or ▼

button to select "System", then press

The Product Information menu is selected.

- Software Version, Firmware Version

English - 40

DTV

Product Information

Software Version: T-PERLDEUC-0010 Firmware Version: T-EMMA2DEUB-0105

Return

Checking the Signal Information

You can get information about the signal status.

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Digital Menu", then press the

ENTER button.

Press the ▲ or ▼ button to select "Setup", then press the

ENTER button.

3. Press the ▲ or ▼ button to select "System", then press the ENTER button.

4. Press the ▲ or ▼ button to select "Signal Information", then press the ENTER button.

5. Press the EXIT button to exit.

If the signal status is poor, the "No signal." message is displayed.

➣

DTV

Signal Information

Service: ? Service ID:0000 Multiplex: ? (TSID 0000, ONID 0000) Network: ? (ID 0000) Bit error level: 10 Signal Strength: 0

Move Enter Return

Return

Upgrading the Software

To keep your product up-to-date with new Digital Television features then software upgrades are periodically broadcast as part of the normal Television signal. It will automatically detect these signals and display the software upgrade banner. You are given the option to install the upgrade.

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Digital Menu", then press the

ENTER button.

2. Press the ▲ or ▼ button to select "Setup", then press the

ENTER button.

3. Press the ▲ or ▼ button to select "System", then press the ENTER button.

4. Press the ▲ or ▼ button to select "Software Upgrade", then press the ENTER button.

Press the

▲ or ▼

button to select “Software Information”,

“Manual Upgrade” or “Standby Mode upgrade”.

Press the ENTER button.

♦ Software Information Press the ENTER button, then the current software version is shown. To display the software

version information, press the ENTER button again. To switch to an alternative version, press the red button. Press the blue button to reset, activate the upgrade and restart.

♦

Manual Upgrade

Press the ENTER button to search for new software from the currently broadcasting channels. ♦ Standby Mode Upgrade: On / Off

Press the ENTER button. To continue software upgrade with master power on, Select On

by pressing the ▲ or ▼ button. 45 minutes after entering standby mode, a manual upgrade is

automatically conducted. Since the power of the unit is turned on internally, the screen may be on slightly for the LCD product. This phenomenon may continue for more than 1 hour until the software upgrade is completed.

6. Press the EXIT button to exit.

DTV

Product Information Signal Information Software Upgrade Reset

DTV

Software Information Manual Upgrade Standby Mode upgrade : On

System



Move Enter Return

Software Upgrade

Move Enter Return

  

English - 41

Viewing Common Interface

This contains information on CAM inserted in the CI slot and displays it.

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Digital Menu", then press the

ENTER button.

2. Press the ▲ or ▼ button to select "Setup", then press the ENTER button.

3. Press the ▲ or ▼ button to select "Common Interface", then press the ENTER button.

4. Press the ENTER button to display the information for

your application.

5. Press the EXIT button to exit. The Application Info inserting is about the CI CARD.

➣

You can install the CAM anytime whether the TV is ON or OFF.

1. Purchase the CI CAM module by visiting your nearest dealer

or by phone.

2. Insert the CI CARD into the CAM in the direction of the

arrow until it fits.

3. Insert the CAM with the CI CARD installed into the common

interface slot. (Insert the CAM in the direction of the arrow, right up to the end so that it is parallel with the slot.)

4. Check if you can see a picture on a scrambled signal channel.

DTV

Type : CA Manufacturer : Channel Plus Info : Top Up TV

Return

Application Info

Selecting the CI (Common Interface) Menu

This enables the user to select from the CAM-provided menu.

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Digital Menu", then press the

ENTER button.

2. Press the ▲ or ▼ button to select "Setup", then press the ENTER button.

3. Press the ▲ or ▼ button to select "Common Interface", then press the ENTER button.

Main menu

Module informa tion Smart card inf ormation Language Software Downl oad

Press OK to select, or Exit to quit

Move Enter Exit

4. Select to "CI Menu" by pressing the ▲ or ▼ button, and press the ENTER button.

5. Select the required option by pressing the ▲ or ▼ button, and press the ENTER button.

6. Press the EXIT button to exit.

Select the CI Menu based on the menu PC Card.

➣

CI Menu

English - 42

Resetting

You can reset the values stored to the factory default values.

The Reset operation deletes all channel information and

➣

user preferences returning all values to their default factory state.

Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Digital Menu", then press the

ENTER button.

2. Press the ▲ or ▼ button to select "Setup", then press the ENTER button.

3. Press the

▲ or ▼

button to select "System", then press

the ENTER button.

4. Press the

▲ or ▼

button to select "Reset", then press the

ENTER button.

5. The "Enter PIN" screen will appear.

6. Enter your current 4-digit PIN code by using the numeric

buttons (0~9).

The warning message is displayed. All values will be reset

➣

by pressing the coloured buttons (red, green, yellow, and blue) in turn.

7. Press the EXIT button to exit.

DTV

Enter PIN

DTV

WARNING: All channel settings and user preferences will be lost and returned to the factory defaults. It is recommended that a reset is performed only when serious problems are experienced.

Reset

Enter PIN Return

Reset

Return

Selecting the Preferred Language (Subtitle, Audio or Teletext)

You can change the default value for subtitle, audio teletext languages. Displays the language information for the incoming stream.

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Digital Menu", then press the

ENTER button.

2. Press the ▲ or ▼ button to select "Language", then press the ENTER button.

Press the

▲ or ▼

button to select "Audio Language",

"Subtitle Language" or "Teletext Language". Press the ENTER button.

4. Select a particular language by pressing the ▲ or ▼ button repeatedly. Press the ENTER button.

English is the default in cases where the selected

➣

language is unavailable in the broadcast.

5. Press the EXIT button to exit. While viewing a programme, the subtitle can be selected

➣

While viewing a programme, audio languages can be selected.

DTV

Audio Language Subtitle Language Teletext Language Preference 

Move Enter Return

DTV

Audio Language Subtitle Language Teletext Language Preference 

Move Enter Return

DTV

Audio Language Subtitle Language Teletext Language Preference 

Language

English - 43

Move Enter Return

Preference

This menu consists of 6 sub-menus: Primary Audio Language, Secondary Audio Language, Primary Subtitle Language, Secondary Subtitle Language, Primary Teletext Language, Secondary Teletext Language.

Using this feature, users can select one of the languages. The language selected here is the default when the user selects a channel.

♦ Press the ▲ or ▼ button to select required menu (Primary

Audio Language, Secondary Audio Language, Primary Subtitle Language, Secondary Subtitle Language, Primary Teletext Language, Secondary Teletext Language), then press the ENTER button. The options of the selected menu are displayed.

♦ Select the appropriate language by pressing the ▲ or ▼ button.

Press the ENTER button to confirm your choice. If you change the language setting, the Subtitle Language, Audio Language, and the Teletext

➣

Language of the Language menu (refer to page 43) are automatically changed to the selected language.

The Subtitle Language, Audio Language, and the Teletext Language of the Language menu show a

➣

list of languages supported by the current channel and the selection is highlighted. If you change this language setting, the new selection is only valid for the current channel. The changed setting does not change the setting of the Primary Subtitle Language, Primary Audio Language, or the Primary Teletext Language of the Preference menu.

DTV

Audio Language Subtitle Language Teletext Language Preference 

Move Enter Return

Language

English - 44

Setting up Your PC Software (Based on Windows XP)

The Windows display-settings for a typical computer are shown below. The actual screens on your PC may be different depending upon your particular version of Windows and your particular video card. Even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)

First, click on "Control Panel" on the Windows start menu.

2. When the control panel window appears, click on "Appearance and Themes" and a display dialog-box will appear.

3. When the control panel window appears, click on "Display" and a display

dialog-box will appear.

4. Navigate to the "Settings" tab on the display dialog-box. The correct size setting (resolution): Optimum- 1360 X 768 If a vertical-frequency option exists on your display settings dialog box, the correct value is "60" or "60 Hz". Otherwise, just click "OK" and exit the dialog box.

Display Modes

Both screen position and size will vary depending on the type of PC monitor and its resolution. The resolutions in the table are recommended.

D-Sub Input

Mode

IBM

VESA

HDMI/DVI Input

Mode

VESA

Resolution

640x350

720×400 640×480

640×480 640×480 800×600 800×600

800×600 1024×768 1024×768 1024×768

1360 x 768

Resolution

640×480

800×600 1024×768

1360 x 768

Horizontal

Frequency (kHz)

31.469

37.861

37.500

37.879

48.077

46.875

48.363

56.476

60.023

47.712

Horizontal

Frequency (kHz)

31.469

37.879

48.363

47.712

Vertical

Frequency (Hz)

70.086

70.087

59.940

72.809

75.000

60.317

72.188

75.000

60.004

70.069

75.029

60.015

Vertical

Frequency (Hz)

59.940

60.317

60.004

60.015

Pixel Clock

Frequency (MHz)

25.175

28.322

25.175

31.500

40.000

50.000

49.500

65.000

75.000

78.750

85.500

Pixel Clock

Frequency (MHz)

25.175

40.000

65.000

85.500

Sync Polarity

(H/V)

+/-

-/+

-/-

-/+/+ +/+ +/+

-/-

-/+/+ +/+

(H/V)

-/-

+/+

-/-

+/+

When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.

➣ ➣

The interlace mode is not supported.

➣

The set might operate abnormally if a non-standard video format is selected.

➣

Separate and Composite modes are supported. SOG is not supported.

English - 45

Setting up the TV with your PC

Preset: Press the SOURCE button to select PC mode.

Press the MENU button to display the menu.

Press the

ENTER button, to select "Picture".

2. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.

3. When you are satisfied with your setting, press the ENTER button.

4. Press the EXIT button to exit.

♦

Auto Adjustment

Auto adjustment allows the PC screen of set to self-adjust to

the incoming PC video signal. The values of fine, coarse and position are adjusted automatically.

Easy Setting

1. Press the

TOOLS button on the remote control.

2. Press the ▲ or ▼ button to select “Auto Adjustment”, then

press the ENTER button.

♦ Screen Adjustment: Coarse/Fine

The purpose of picture quality adjustment is to remove or

reduce picture noise. If the noise is not removed by Finetuning alone, then adjust the frequency as best as possible (coarse) and Fine-tune again. After the noise has been reduced, re-adjust the picture so that it is aligned on the center of screen.

Press the ▲ or ▼ button to select "Coarse" or "Fine", then

press the ENTER button. Press the ◄ or ► button to adjust the screen quality. Press the ENTER button.

Mode : Standard  Backlight 7 Contrast 95 Brightness 45

Sharpness 50

Auto Adjustment  Screen Adjustment 

Detailed Settings 

Picture Options  Reset : OK 

Move Enter Return

Auto Adjustment in progress

Anynet+ (HDMI-CEC) Picture Mode : Standard Sound Mode : Custom Sleep Timer : Off SRS TS XT : Off Energy Saving : Off Auto Adjustment

Move Enter Exit

Coarse 50 Fine 34 Position  Image Reset

Move Enter Return

Picture

Please wait.

Tools

Screen Adjustment



Position

Adjust the PC’s screen positioning if it does not fit the TV

screen.

Press the ▲ or ▼ button to adjusting the Vertical-Position. Press the ◄ or ► button to adjust the Horizontal-Position.

Press the ENTER button.

Image Reset

You can replace all image settings with the factory default values.

English - 46

Move Enter Return

Screen Adjustment

Coarse 50 Fine 34 Position  Image Reset



Move Enter Return

What is Anynet+?

Anynet+ is an AV network system that enables an easy-to-use AV interface for users by controlling all connected AV devices through the Anynet+ menu when Samsung Electronics AV devices are connected.

Connecting Anynet+ Devices

The Anynet+ system supports AV devices supporting Anynet+ only. Check if there is an Anynet+ mark on the AV device to be connected to the TV.

Anynet+ Device 1 Anynet+ Device 2 Anynet+ Device 3

To directly connect to TV

Connect the [HDMI 1], [HDMI 2] or [HDMI 3] jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using the HDMI cable.

HDMI Cable

To connect to Home Theater

1. Connect the [HDMI 1],

[HDMI 2] or [HDMI 3]

Anynet+ Device 1 Anynet+ Device 2

jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using the HDMI cable.

HDMI Cable

Home Theatre

HDMI Cable

Anynet+ Device 3

2. Connect the HDMI IN jack

of the home theatre and the HDMI OUT jack of the corresponding Anynet+ device using the HDMI cable.

Optical Cable

HDMI Cable

Connect only the optical cable between [Digital Audio Out (Optical)] on your TV and Digital Audio

➣

Input on the receiver. Connect only one receiver.

➣

You can listen to 5.1 channel sound through the home theatre’s speakers. Otherwise, you can only

➣

listen to 2 channel stereo sound in other cases. Make sure to connect the Digital Audio IN (Optical) of the home theatre and the TV correctly to listen to TV sound through the home theatre. However, you cannot listen to sound from the BD recorder that is sent to the home theatre via the TV in 5.1 channel sound because the TV outputs only 2 channel stereo sound. Please see the manual for the home theatre. You can connect an Anynet+ device using the HDMI cable. Some HDMI cables may not support

➣

Anynet+ functions. Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status.

➣

Anynet+ supports up to 8 AV devices in total.

➣

English - 47

Setting Up Anynet

The following settings are to use Anynet+ functions. Using the Anynet+ Function

Press The TOOLS button. Then Press the ENTER button

to select "Anynet+(HDMI-CEC)". Press the ▲ or ▼ button to select "Setup", then press the

ENTER button.

Anynet+ (HDMI-CEC) Picture Mode : Standard Sound Mode : Custom Sleep Timer : Off SRS TS XT : Off Energy Saving : Off Dual l-ll : Mono

2. Press the ENTER button to select "Anynet+ (HDMI-CEC)",

then press the

3. Press the ▲ or ▼ button to select "On", then press the

ENTER button.

➣

The "Anynet+ (HDMI-CEC)" function is enabled.

➣

If you select "Off", "Anynet+ (HDMI-CEC)" is disabled.

➣

When the "Anynet+ (HDMI-CEC)" function is disabled, all the Anynet+ related operations are deactivated.

ENTER button.

Move Enter Exit

TV P9

View TV

Select Device  Record  Menu on Device  Device Operation  Receiver :Off  Setup 

Move Enter Return

Anynet+ (HDMI-CEC)

Auto Turn Off

Searching Connections

Move Enter Return

Turning an Anynet+ Device Off Automatically when the TV is Turned Off

1. Press the ▲ or ▼ button to select "Auto Turn Off", then press

the

ENTER button.

2. Press the ▲ or ▼ button to select "Yes", then press the

ENTER button.

➣

The Auto turn off function is enabled.

➣

If you select "No", the Auto turn off function is cancelled.

Press the EXIT button to exit.

➣

The Select Device setting of the TV remote control is to be set

Anynet+ (HDMI-CEC)

Auto Turn Off

Searching Connections

Move Enter Return

to TV to use the Anynet+ function.

➣

If you set "Auto Turn Off" to "Yes", connected external devices are also turned off when the TV is turned off. However, if the device is recording, it may not be turned off.

Tools

Setup

: Off

Setup

: On

: Off

Off

Yes

English - 48

Scanning and Switching between Anynet+ Devices

1. Press the TOOLS button. Then press the ENTER button to

select "Anynet+(HDMI-CEC)".

2. Press the ▲ or ▼ button to select "Select Device", then press

the ENTER button.

3. Press the ▲ or ▼ button to select to a particular device and

press the ENTER button. It is switched to the selected device.

4. If you cannot find a device you want, press the ▲ or ▼ button

to select "Setup", then press the ENTER button.

5. Press the ▲ or ▼ button to select "Searching Connections",

then press the ENTER button.

The message "Configuring Anynet+ connection..." is displayed.

When searching devices completes, the connected devices are listed in the Anynet+ menu. Switching to the selected devices may take up to 2 minutes.

➣

You cannot cancel the operation during the switching operation. The time required to scan for devices is determined by the

➣

number of connected devices. When the device scan is complete, the number of found

➣

devices is not displayed. Although the TV automatically scans devices when it is turned on using the POWER button, devices

➣

connected when the TV is on or under a specic circumstance are not displayed in the device list.

Therefore select "Searching Connections" menu to search devices. If you have selected external input mode by pressing the SOURCE button, you cannot use the

➣

Anynet+ function. Make sure to switch to an Anynet+ device by using the

TV P9

View TV

Select Device  Record  Menu on Device  Device Operation  Receiver :Off  Setup 

Move Enter

Move Enter Return Return

Setup

Anynet+ (HDMI-CEC)

Auto Turn Off

Searching Connections 

Move Enter Return

: On

: Yes

TOOLS button.



English - 49

Anynet+ Menu The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected

to the TV.

Anynet+ Menu Description View TV Switches from Anynet+ to TV broadcast mode. Select Device Your TV connects to the corresponding device. Record Starts a recording. (This menu works only for a device supporting

Menu on Device Shows the menu of the connected device.

Device Operation Shows the play control menu of the connected device.

Receiver Sound is output through the receiver. Setup You can set the environment for using Anynet+.

TV Remote Control Buttons Available in Anynet+ Mode

Device Type Operating Status Available Buttons

Anynet+ Device

Device with built-in Tuner

Audio Device When Receiver is activated

➣

The Anynet+ function only works when the remote control is set to TV.

➣

The

➣

You cannot control Anynet+ devices using the buttons on the TV. You can control Anynet+ devices only using the TV remote control. The TV remote control may not work under certain conditions. In this case, re-select the Anynet+

➣

device. The Anynet+ functions don’t operate for the products from other manufacturers.

➣

In Anynet+ mode, the colour buttons may not work properly.

➣

The

➣

button works only while in the recordable state.

, operations may differ depending on the device.

recording.)

Example. When a DVD Recorder is connected, the DVD Recorder’s title menu appears.

Example. When a DVD Recorder is connected, the play control menu of the DVD Recorder appears.

After switching to the device, when the menu of the corresponding device is displayed on the screen.

After switching to the device, while playing a file

After switching to the device, when you are watching a TV programme

Numeric buttons

▲/▼/◄/►/

Colour buttons EXIT button

P</>button

MUTE button

ENTER buttons

(Backward search)/ (Forward search)/ (Stop)/ (Play) (Pause)

+/- button/

English - 50

Recording

You can make a recording of a TV programme using a recorder.

Press the button. Recording begins. (Only when the Anynet+ enabled recording device is connected.)

The current TV programme is recorded in the Watching TV status. If you are watching video from

➣

another device, the video from the device is recorded. You can also record the source streams by selecting "Record" after pressing the

➣

Before recording, check whether the antenna jack is properly connected to the recording device. For

➣

the antenna connection to the recording device, refer to its user manual.

TOOLS button.

Listening through a Receiver

You can listen to sound through a receiver instead of the TV speaker.

1. Press The TOOLS button. Then Press the ENTER button

to select "Anynet+(HDMI-CEC)". Press the ▲ or ▼ button to select "Receiver", then press the

ENTER button.

2. Press the ◄ or ► button to select to "On", then press the ENTER button.

Now you can listen to sound through the receiver.

3. Press the EXIT button to exit.

➣

When the receiver is set to On, you can listen to the TV sound through the 2-channel receiver. If the receiver is exclusively for a home theatre only

➣

(supporting audio only), it may not appear in the device list. Only when you have connected the optical jack of the TV and the receiver properly, does Receiver

➣

work. In case of a content with copyright problem, listening through the receiver may not properly operate.

➣

If there is a power interruption to the TV when the “Receiver” is set to “On” (by disconnecting the

➣

power cord or a power failure), the “TV Speaker” may be set to “Off” when you turn the

(see page 22)

TV P9

View TV

Select Device  Record  Menu on Device  Device Operation  Receiver :Off  Setup 

Move Enter Return

TV on again.

English - 51

Check Points before Requesting Service

Symptom Solution

Anynet+ does not work.

I want to start Anynet+.

I want to exit Anynet+.

The Configuring Anynet+ connection message appears on the screen. The Anynet+ device does not play. The connected device is not displayed.

The TV programme cannot be recorded. The TV sound is not output through the receiver.

■ Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+

devices only.

■ Connect only one receiver.

■ Check if the Anynet+ device power cord is properly connected.

■ Check the Anynet+ device’s Video/Audio/HDMI cable connections.

■ Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.

■ Check whether the TV remote control is in TV mode.

■ Check whether it is Anynet+ exclusive remote control.

■ Anynet+ doesn’t work at a certain condition. (Searching channels, Plug & Play,

etc.)

■ When connecting or removing the HDMI cable, please make sure to search devices again or restart your TV.

■ Check if the Anynet+ Function of Anynet+ device is set on.

■ Check if the Anynet+ device is properly connected to the TV and check if the

Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu.

■ Press the TV/DTV button on the TV remote control to switch to TV. Then press

TOOLS button to show the Anynet+ menu and select a menu you want.

the

■ Select View TV in Anynet+ menu.

■ Press the SOURCE button on the TV remote control and select a device other

than Anynet+ devices.

■ Press any of P / , PRE-CH, and such to change to the TV mode. (Note that the channel button operates only when a tuner-embedded Anynet+ device is not connected.)

■ You cannot use the remote control when you are configuring Anynet+ or

switching to a view mode.

■ Use the remote control when the Anynet+ setting or switching to view mode is

complete.

You cannot use the play function when Plug & Play is in progress.

■ Check whether or not the device supports Anynet+ functions.

■ Check whether or not the HDMI cable is properly connected.

■ Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.

■ Search Anynet+ devices again.

■ You can connect an Anynet+ device using the HDMI cable only. Some HDMI

cables may not support Anynet+ functions.

■ If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power cord or a power failure, please repeat the device scan.

Check whether the antenna jack on the recording device is properly connected.

Connect the optical cable between TV and the receiver.

English - 52

Teletext Feature

Most television stations provide written information services via Teletext. The index page of the teletext service gives you information on how to use the service. In addition, you can select various options to suit your requirements by using the remote control buttons.

For teletext information to be displayed correctly, channel reception must be stable. Otherwise,

information may be missing or some pages may not be displayed.

1. (exit)

Exit from the teletext display

6 (index)

Used to display the index (contents) page at any time while you are viewing teletext.

8 (store)

Used to store the teletext pages.

4 (size)

Press to display the double-size letters in the upper half of the screen. For lower half of the screen, press it again. To display normal screen, press it once again.

5 (reveal)

Used to display the hidden text (answers to quiz games, for example). To display normal screen, press it again.

/ (teletext on/mix)

Press to activate teletext mode after selecting the channel providing the teletext service. Press it twice to overlap the teletext with the current broadcasting screen.

0 (mode)

Press to select the teletext mode (LIST/FLOF). If you press it in the LIST mode, it switches into the List save mode. In the List save mode, you can save teletext page into list using the 8(store) button.

1 (sub-page)

Used to display the available sub-page.

2 (page up)

Used to display the next teletext page.

3 (page down)

Used to display the previous teletext page.

9 (hold)

Used to hold the display on a given page if the selected page is linked with several secondary pages which follow on automatically. To resume, press it again.

7 (cancel)

Used to display the broadcast when searching for a page.

Colour buttons (red/green/yellow/blue)

If the FASTEXT system is used by a broadcasting company, the different topics covered on a teletext page are colour-coded and can be selected by pressing the coloured buttons. Press one of them corresponding to the required. The page is displayed with other coloured information that can be selected in the same way. To display the previous or next page, press the corresponding coloured button.

2 3

@ #

You can change teletext pages by pressing the numeric buttons on

the remote control.

English - 53

The teletext pages are organized according to six categories:

Part Contents

A Selected page number. B Broadcasting station identity. C Current page number or search status. D Date and time.

E Text.

F Status information.

FASTEXT information.

Teletext information is often divided between several pages displayed in sequence, which can be

accessed by:

♦ Entering the page number ♦ Selecting a title in a list ♦ Selecting a coloured heading (FASTEXT system)

Press the TV/DTV button to exit from the teletext display.

English - 54

Wall-Mount Adjustment (Sold separately) (depending on the model)

Once the auto wall mount is installed, your TV’s position can be easily adjusted.

TV Rear Panel Auto Wall-Mount

SERVICE Cable (Not supplied)

Entering the menu

1. Press the ▲, ▼, ◄ or ► button on your remote control.

The Wall Mount Adjustment screen is displayed.

➣

If the Wall Mount Adjustment screen is not displayed when

➣

clicking on a direction button while watching your TV, use the menu to display that screen.

• Press the MENU butt on to display the menu.

Press the ▲ or ▼ button to select “Setup”, then press the

ENTER button.

• Press the ▲ or ▼ button to select “Wall-Mount Adjustment”,

then press the ENTER button.

Plug & Play  Language : English  Time  Wall-Mount Adjustment  Melody : Off  Entertainment : Off  Energy Saving : Off 

Move Enter Return

Setup

Remembering the Position

2. Adjust to the desired position using the ▲,▼,◄,► buttons.

If you press an arrow button when no OSD is displayed on

➣

the TV screen, the Adjustment screen appears. Press the INFO button to reset. Press the ◄ or ► button to

➣

select “Yes”, then press the

ENTER button.

The position is initialized to the default setting.

3. Press the blue button.

Press the ▲ and ▼ buttons to select a save mode from either

Position 1, Position 2 or Position 3 in order to save the current position.

To not save the current position, press the

➣

When selecting a save mode, you cannot use the Colour

➣

RETURN button.

buttons.

4. Press the ENTER button to save.

When Position1 is selected, the message "Current position

➣

saved as Position1" is displayed.

5. Press the ENTER button.

The saved Position appears on the left side of the OSD.

➣

English - 55

Wall-Mount Adjustment

Position 1 2 3 Adjust Save Center

Select a mode to Save.

Position1

Position2

Position3

Move Enter Return

INFO

Save

Moving to the remembered position

1. Complete Step 1 of “Entering the menu”.

2. Pressing a Colour (Red, Green, Yellow) button moves the auto

wall mount to the saved position.

You can move the wall mount to one of the 3 pre-set

➣

positions by pressing the Red (Position 1), Green (Position 2) or Yellow (Position 3) buttons. If you adjust the Position after moving to a pre-set position,

➣

the position display will disappear.

For installation, refer to the Installation Manual provided with the wall mount.

➣

For product installation and the installation and moving of the wall mount, make sure to consult a

➣

specialized installation company. This installation manual is to be used when attaching the wall mount to a wall. When attaching to

➣

other building materials, please contact your nearest dealer. The auto wall mount will not work when Anynet+ is operating.

➣

37 and 40 inch models are not compatible with the old electrically powered wall mount model

➣

(WMN5090A*).

Wall-Mount Adjusment

Position1

Position 1 2 3 Adjust Save Center

INFO

Using the Anti-Theft Kensington Lock (depending on the model)

The Kensington lock is a device used to physically fix the system when using it in a public place. The appearance and locking method may differ from the illustration depending on the manufacturer. Refer to the manual provided with the Kensington lock for proper use. The locking device has to be purchased separately.

Insert the locking device into the Kensington

slot on the LCD TV (Figure 1), and turn it in the locking direction (Figure 2).

2. Connect the Kensington lock cable.

3. Fix the Kensington lock to a desk or a heavy

stationary object. The location of the Kensington Lock may be

➣

different depending on its model.

Cable

Figure 2

Figure 1

English - 56

Securing the TV to the Wall

주의

Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, causing serious injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety purposes, as follows.

To avoid the TV from falling:

1. Put the screws into the clamps and rmly fasten them onto

the wall. Conrm that the screws have been rmly installed

onto the wall.

You may need additional material such as an anchor

➣

depending on the type of wall. Since the necessary clamps, screws, and string are not

➣

supplied, please purchase these additionally.

2. Remove the screws from the center back of the TV, put the

screws into the clamps, and then fasten the screws onto the TV again.

Screws may not be supplied with the product. In this

➣

case, please purchase the screws of the following

specications.

Screw Specifications

- For a 17 ~ 29 Inch LCD TV: M4 X 15

- For a 32 ~ 40 Inch LCD TV: M6 X 15

Wall

3. Connect the clamps xed onto the TV and the clamps xed

onto the wall with a strong string and then tie the string tightly.

➣

Install the TV near to the wall so that it does not fall backwards.

It is safe to connect the string so that the clamps xed on

➣

the wall are equal to or lower than the clamps xed on the

TV.

➣

Untie the string before moving the TV.

4. Verify all connections are properly secured. Periodically

check connections for any sign of fatigue for failure. If you have any doubt about the security of your connections,contact a professional installer.

English - 57

Wall

Troubleshooting: Before Contacting Service Personnel

No sound or picture.

Normal picture but no sound.

Screen is black and power indicator light blinks steadily.

No picture or black and white picture.

Sound and picture interference.

Blurred or snowy picture, distorted sound.

Remote control malfunctions.

'Check signal cable.' message is displayed.

On PC mode, 'Not Supported Mode.' message is displayed.

The damaged picture appears in the corner of the screen.

The 'Resets all settings to the default values' message appears.

The TFT LCD panel uses a panel consisting of sub pixels (3 133 440) which require sophisticated technology to produce. However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.

Check that the mains lead has been connected to a wall socket.

 

Check that you have pressed the



Check the picture contrast and brightness settings.



Check the volume. Check the volume.

  Check whether the MUTE button has been pressed on the remote control. 

Check if "TV Speaker" is on. On your computer check; Power, Signal Cable.

 

The TV is using its power management system.



Move the computer’s mouse or press any key on the keyboard. Adjust the colour settings.

 

Check that the broadcast system selected is correct. Try to identify the electrical appliance that is affecting the set and move it



further away.



Plug your set into a different mains socket. Check the direction, location and connections of your aerial.



This interference is often due to the use of an indoor aerial.

Replace the remote control batteries.

 

Clean the upper edge of the remote control (transmission window).



Check the battery terminals. Check that the signal cable is firmly connected to the PC or video sources.

 

Check that the PC or video sources are turned on.



Check the maximum resolution and the frequency of the video adaptor.



Compare these values with the data in the Display Modes.

If "Just Scan" is selected in some external devices, the damaged picture may appear in the corner of the screen. This symptom is caused by external devices, not TV.

This appears when you press and hold the The product settings are reset to the factory defaults.

button on your set.

EXIT button for a while.

English - 58

Technical and Environmental Specications

Model Name Screen Size (Diagonal) PC Resolution Sound

Output

Dimensions (WxDxH)

Body With stand Weight

With stand

Environmental Considerations

Operating Temperature Operating Humidity Storage Temperature Storage Humidity

Stand Swivel (Left / Right)

Model Name Screen Size (Diagonal) PC Resolution Sound

Output

Dimensions (WxDxH)

Body With stand Weight

With stand

Environmental Considerations

Operating Temperature Operating Humidity Storage Temperature Storage Humidity

Stand Swivel (Left / Right)

LE26A456 LE32A456

26 inch 32 inch

1360 X 768 @ 60 Hz 1360 X 768 @ 60 Hz

5W x 2 10W x 2

670 X 75 X 446 mm

670 X 216 X 500 mm

10 kg 13 kg

10 °C to 40 °C (50 °F to 104 °F)

10 % to 80 %, non-condensing

-20 °C to 45 °C (-4 °F to 113 °F) 5 % to 95 %, non-condensing

1360 X 768 @ 60 Hz 1360 X 768 @ 60 Hz

916 X 82 X 598 mm

916 X 300 X 658 mm

LE37A456 LE40A456

37 inch 40 inch

10W x 2 10W x 2

18 kg 21 kg

10 °C to 40 °C (50 °F to 104 °F)

10 % to 80 %, non-condensing

-20 °C to 45 °C (-4 °F to 113 °F) 5 % to 95 %, non-condensing

-20˚ ~ 20˚

800 X 79 X 522 mm

800 X 252 X 577 mm

10 °C to 40 °C (50 °F to 104 °F)

10 % to 80 %, non-condensing

-20 °C to 45 °C (-4 °F to 113 °F) 5 % to 95 %, non-condensing

-20˚ ~ 20˚

990 X 82 X 636 mm

990 X 300 X 694 mm

English - 59

Model Name Screen Size (Diagonal) PC Resolution Sound

Output

Dimensions (WxDxH)

Body With stand Weight

With stand

Environmental Considerations

Operating Temperature Operating Humidity Storage Temperature Storage Humidity

Stand Swivel (Left / Right)

LE26A457 LE32A457, LE32A455

26 inch 32 inch

1360 X 768 @ 60 Hz 1360 X 768 @ 60 Hz

5W x 2 10W x 2

670 X 75 X 451 mm

670 X 216 X 500 mm

800 X 79 X 525 mm

800 X 252 X 577 mm

10 kg 13 kg

10 °C to 40 °C (50 °F to 104 °F)

10 % to 80 %, non-condensing

-20 °C to 45 °C (-4 °F to 113 °F) 5 % to 95 %, non-condensing

10 °C to 40 °C (50 °F to 104 °F)

10 % to 80 %, non-condensing

-20 °C to 45 °C (-4 °F to 113 °F) 5 % to 95 %, non-condensing

-20˚ ~ 20˚

Model Name Screen Size (Diagonal) PC Resolution

LE37A457 LE40A457, LE40A455

37 inch 40 inch

1360 X 768 @ 60 Hz 1360 X 768 @ 60 Hz

Sound Output

10W x 2 10W x 2

Dimensions (WxDxH)

Body With stand

916 X 82 X 601 mm

916 X 300 X 658 mm

990 X 82 X 641 mm

990 X 300 X 694 mm

Weight With stand

Environmental Considerations

Operating Temperature Operating Humidity Storage Temperature Storage Humidity

18 kg 21 kg

10 °C to 40 °C (50 °F to 104 °F)

10 % to 80 %, non-condensing

-20 °C to 45 °C (-4 °F to 113 °F) 5 % to 95 %, non-condensing

Stand Swivel (Left / Right)

Design and specifications are subject to change without prior notice. This device is a Class B digital apparatus.

For the power supply and Power Consumption, refer to the label attached to the product.

-20˚ ~ 20˚

English - 60

Samsung LE40A457, LE32A457C1C, LE40A456C2C, LE40A455, LE40A455C1C User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

List of Parts

Installing the Stand

Installing the Wall Mount Kit

Viewing the Control Panel

Viewing the Connection Panel

Viewing the Remote Control

Installing Batteries in the Remote Control

Switching On and Off

Placing Your Television in Standby Mode

Viewing the Menus

Using the TOOLS Button

Plug & Play

Storing Channels Automatically

Storing Channels Manually

Adding / Locking Channels

Sorting the Stored Channels

Assigning Channels Names

Fine Tuning Channel Reception

Changing the Picture Standard

Adjusting the Custom Picture

Resetting the Picture Settings to the Factory Defaults

Changing the Picture Options

Sound Features

Selecting the Sound Mode

Connecting Headphones (Sold separately)

Setting and Displaying the Current Time

Setting the Sleep Timer

Switching the Television On and Off Automatically

Choosing Your Language

Melody / Entertainment / Energy Saving

Selecting the Source

Editing the Input Source Names

Previewing the DTV Menu System

Selecting the Country

Updating the Channel List Automatically

Updating the Channel List Manually

Editing Your Favourite Channels

Selecting Channel List

Displaying Programme Information

Viewing the EPG (Electronic Programme Guide) Information

Using the Scheduled List

Setting the Default Guide

Viewing All Channels and Favourite Channels

Adjusting the Menu Transparency

Setting up the Parental Lock

Setting the Subtitle

Setting the Subtitle Mode

Selecting the Audio Format

Selecting the Audio Description

Viewing Product Information

Checking the Signal Information

Upgrading the Software

Viewing Common Interface

Selecting the CI (Common Interface) Menu

Resetting

Selecting the Preferred Language (Subtitle, Audio or Teletext)

Preference

Setting up Your PC Software (Based on Windows XP)

Display Modes

Setting up the TV with your PC

What is Anynet+?

Connecting Anynet+ Devices

Scanning and Switching between Anynet+ Devices

Recording

Listening through a Receiver

Check Points before Requesting Service

Teletext Feature

Wall-Mount Adjustment (Sold separately) (depending on the model)

Using the Anti-Theft Kensington Lock (depending on the model)

Securing the TV to the Wall

Troubleshooting: Before Contacting Service Personnel