Samsung LE32C650L1P User Manual [en, de, it]

Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country
ARMENIA 0-800-05-555 ­AUSTRIA 0810 - SAMSUNG (7267864, € 0.07/min) www.samsung.com/at AZERBAIJAN 088-55-55-555 ­BELARUS 810-800-500-55-500 -
BELGIUM 02-201-24-18
CZECH
DENMARK    800-7267 www.samsung.com FINLAND   FRANCE  www.samsung.com/fr GERMANY 01805 - SAMSUNG(726-7864 € 0,14/Min) www.samsung.com/de  8-800-555-555 ­HUNGARY 06-80-SAMSUNG(726-7864) www.samsung.com/hu EIRE 0818 717100 www.samsung.com/ie ITALIA 800-SAMSUNG(726-7864) www.samsung.com/it KAZAKHSTAN 8-10-800-500-55-500 ­KYRGYZSTAN 00-800-500-55-500 www.samsung.com LATVIA 8000-7267 www.samsung.com LITHUANIA 8-800-77777 www.samsung.com LUXEMBURG  www.samsung.com/lu  00-800-500-55-500 ­NETHERLANDS  www.samsung.com/nl
 815-56 480 www.samsung.com/no

 80820-SAMSUNG(726-7864) www.samsung.com/pt
RUSSIA 8-800-555-55-55 www.samsung.com
 0800-SAMSUNG(726-7864)    www.samsung.com/es  0771 726 7864 (SAMSUNG) www.samsung.com/se
 0848 - SAMSUNG(7267864, CHF 0.08/min)
TADJIKISTAN 8-10-800-500-55-500 www.samsung.com U.K 0845 SAMSUNG (7267864) 
UKRAINE 0-800-502-000
UZBEKISTAN 8-10-800-500-55-500 www.samsung.com
Customer Care Centre
800 - SAMSUNG (800-726786) www.samsung.com/cz

0 801 1SAMSUNG(172678)

Web Site
www.samsung.com/pl
www.samsung.com/ch www.samsung.com/ch_fr/(French)
www.samsung.ua www.samsung.com/ua_ru
LCD TV user manual
LCD TV
user manual
imagine the possibilities
© 2010 Samsung Electronics Co., Ltd. All rights reserved.
Thank you for purchasing this Samsung product. To receive more complete service, please register your product at
www.samsung.com/register
Model _____________ Serial No. _____________
BN68-02558J-00
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice.
Digital TV notice
1. Functionalities related to Digital TV (DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC) digital terrestrial signals are
broadcasted or where you are able to access to a compatible DVB-C (MPEG2 and MPEG4 AAC) cable-TV service. Please check with your local dealer the possibility to receive DVB-T or DVB-C signal.
2. DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB-C is that for the broadcast
transmission of digital TV over cable. However, some differentiated features like EPG (Electric Programme Guide), VOD (Video On Demand) and so on, are not included in this specification. So, they cannot be workable at this moment.
3. Although this TV set meets the latest DVB-T and DVB-C standards, as of [August, 2008], the compatibility with future DVB-T digital terrestrial and
DVB-C digital cable broadcasts cannot be guaranteed.
4. Depending on the countries/areas where this TV set is used some cable-TV providers may charge an additional fee for such a service and you may
be required to agree to terms and conditions of their business.
5. Some Digital TV functions might be unavailable in some countries or regions and DVB-C might not work correctly with some cable service providers.
6. For more information, please contact your local Samsung customer care centre.
The reception quality of TV may be affected due to differences in broadcasting method between the countries. Please check the TV performance in
the local SAMSUNG Authorized Dealer, or the Samsung Call Centre whether it can be improved by reconfiguring TV setting or not.
Still image warning
Avoid displaying still images (like jpeg picture files) or still image element (like TV programme logo, panorama or 4:3 image format, stock or news bar at screen bottom etc.) on the screen. Constant displaying of still picture can cause uneven wear of screen phosphor, which will affect image quality. To reduce risk of this effect, please follow below recommendations:
Avoid displaying the same TV channel for long periods.• Always try do display any image on full screen, use TV set picture format menu for best possible match.• Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout process.• Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.•
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation. Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
When using a stand or wall-mount, use parts provided by Samsung Electronics only.
If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
x
The appearance may differ depending on the product.
Installation with a stand. Installation with a wall-mount.
2
10 cm
English
10 cm
10 cm
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery return systems)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment. To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.
10 cm
10 cm
10 cm
10 cm
3
English
Contents
Getting Started
4
Connections
7
Basic Features
Advanced Features
22
4 Accessories 4 Viewing the Control Panel 5 Viewing the Remote Control 6 Connecting to an Antenna 6 Plug & Play (Initial Setup)
7 Connecting to an AV Device 8 Connecting to an Audio Device 9 Changing the Input Source
9 How to Navigate Menus 10 Using the INFO button (Now & Next guide) 10 Planning Your Viewing 12 Channel Menu 13 Picture Menu 16 Sound Menu 18 Setup Menu 21 Support Menu
22 Connecting to a PC 23 Network Connection 29 Media Play 36 Anynet 39 Internet@TV 44 AllShare
+
Other Information
46
t
This function can be used by
pressing the TOOLS button on the
remote control.
46 Analogue Channel Teletext Feature 47 Installing the Wall Mount 48 Assembling the Cables 49 Anti-Theft Kensington Lock 49 Securing the TV to the Wall 50 Troubleshooting 53 Specifications 54 Index
Check the Symbol!
Note One-Touch Button
O
Getting Started
Accessories
Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.
The items’ colours and shapes may vary depending on the models.
Remote Control & Batteries (AAA x 2) y Owner’s Instructions y Warranty Card / Safety Guide (Not available in some locations) y
Blanking Bracket y Cable tie y Holder-Ring (4ea) y
See separate guide for installing the stand.
Cleaning Cloth y Power Cord y
(46 ~ 55 inch TVs)
or
Stand (1EA) y Guide Stand (1EA) y Screws (9EA) y
(32 inch model only: 8EA)
(M4 X L12)
Viewing the Control Panel
The product colour and shape may vary depending on the model.
Power IndicatorRemote control sensor
Speakers
P
(Power)
Power Indicator Blinks and turns off when the power is on and lights up in standby mode.
SOURCE
MENU Displays an on-screen menu, the OSD (on screen display), of your TV’s features.
Y
z
Remote control sensor Aim the remote control towards this spot on the TV.
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.
E
Turns the TV on or off.
Toggles between all the available input sources. In the on-screen menu, use this button as you would use the ENTERE button on the remote control.
Adjusts the volume. In the OSD, use the Y buttons as you would use the and buttons on the remote control.
Changes the channels. In the OSD, use the z buttons as you would use the and buttons on the remote control.
4
English
5
01 Getting Started
English
Viewing the Remote Control
This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel, and
Volume buttons.
Turns the TV on and off. (P. 6)
Displays and selects the available video
Press to directly access to channels.
Alternately selects Teletext, Double
Displays the main on-screen menu.
Displays the Content View, which includes
Channel Manager, Internet@TV, Media Play,
Quickly selects frequently used functions.
Selects the on-screen menu items and changes the values seen on the menu.
Returns to the previous menu.
These buttons are for the Channel Manager,
Internet@TV, Media Play menu, etc.
Use these buttons in the Media Play and
Anynet
(: Controls recording for Samsung recorders
that have the Anynet+ feature)
sources. (P. 9)
or MiX.
Adjusts the volume.
(P. 9)
and AllShare.
+
modes. (P. 29, 36)
Turns the remote control light on or off. When on, the buttons become illuminated for a moment when pressed. (Using the remote control with this button set to On will reduce the battery usage time.)
Returns to the previous channel.
Cuts off the sound temporarily.
Changes channels.
Displays channel lists on the screen. (P. 13)
Displays the EPG (Electronic Programme Guide). (P. 10)
Displays information on the TV screen. (P. 10)
Exits the menu.
MEDIA.P: Views the Media play (P. 29). INTERNET: Links to various Internet services
(P. 39).
DUAL I-II: Selects sound mode (P. 17). D (Data Service): Use this button when using data
broadcast service (P. 17).
P.SIZE: Selects the picture size (P. 15). SUBT.: Displays digital subtitles (P. 19).
Installing batteries (Battery size: AAA)
NOTE
Use the remote control within 23 feet from the TV.
x
Bright light may affect the performance of the remote
x
control. Avoid using nearby special fluorescent light or neon signs.
The colour and shape may vary depending on the model.
x
Getting Started
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
Preset: Connecting the mains and antenna.
VHF/UHF Antenna
or
Power Input
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERP button. Plug & Play is available only when the Input source is set to TV.
To return to the previous step, press the red button.
Selecting a language
1
Selecting Store Demo
2
or Home Use
Selecting an antenna
3
Selecting a channel
4
Setting the Clock
5
Mode Viewing the HD
6
Connection Guide. Enjoy your TV.
Press the or button, then press the ENTER Select the desired OSD (On Screen Display) language. Press the or button, then press the ENTERE button.
Select the y Home Use mode. Store Demo Mode is for retail environments.
Return the unit’s settings from y Store Demo to Home Use (standard): Press the volume button on the TV. When the OSD
volume is displayed, press and hold MENU for 5 sec. Press the or button, then press the ENTER Select Air or Cable. Press the or button, then press the ENTER Select the channel source to memorise. When setting the antenna source to Cable, a step
appears allowing you to assign numerical values (channel frequencies) to the channels. For more information, refer to Channel Auto Store (P. 12).
Press the Set the Clock Mode automatically or manually.
The connection method for the best HD screen quality is displayed.
Press the ENTER
ENTERE button at any time to interrupt the memorization process.
E
button.
E
E
E
button.
button.
button.
Cable
ANT OUT
7
If You Want to Reset This Feature...
Select Setup - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.” If you want to change the PIN number, use the Change PIN function.
6
English
7
English
Connections
W R
W
W
G
G
W
W
Y
Y
R
R
R
R
R
R
B
B
P
R PB Y
R-AUDIO-L
P
R PB Y
R-AUDIO-L
P
R PB Y
W W
BGRRWY
BGRR
W W
BGRR
R-AUDIO-L
P
R PB Y
Connecting to an AV Device
Using an HDMI / DVI Cable: HD connection (up to 1080p)
Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver, cable box, satellite receiver (STB)
DVD
02 Connections
Red White
HDMI IN 1 (DVI), 2, 3, 4 / PC/DVI AUDIO IN
When using an HDMI/DVI cable connection, you must use the
x
HDMI IN 1(DVI) jack. For the DVI cable
connection, use a DVI to HDMI cable or DVI-HDMI (DVI to HDMI) adapter for video connection and the DVI
AUDIO IN jacks for audio.
If an external device such as a DVD / Blu-ray player / cable box /
x
STB satellite receiver supporting a HDMI versions older than 1.3 is connected, the TV may operate abnormally (e.g. no screen display / no sound / annoying flicker / abnormal colour).
If there is no sound after connecting an HDMI cable, check the HDMI version of the external device. If you
x
suspect the version is older than 1.3, contact the provider of the device to confirm the HDMI version and request an upgrade.
It
is recommended you purchase an HDMI-certified cable. Otherwise, the screen may appear blank or a
x
connection error may occur.
Using a Component (up to 1080p) or Audio / Video (480i only) Cable and Using a Scart Cable
Available devices: VCR, DVD, Blu-ray player, cable box, STB satellite receiver
HDMI OUT
AUDIO OUT
DVI OUT
Yellow Red White
AUDIO OUT
In
Ext. mode, DTV Out supports MPEG SD Video and Audio only.
To obtain the best picture quality, the Component connection is recommended over the A/V connection.
VIDEO OUT
Blu-ray player DVDVCR
AUDIO OUT
COMPONENT OUT
Red Blue Green
EXT
Connections
Connecting to an Audio Device
Using an Optical or Audio Cable Connection
Available devices: digital audio system, amplifier, DVD home theatre
DIGITAL AUDIO OUT (OPTICAL)
When a digital audio system is connected to the
x
of both the TV and the system.
5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.
x
When the receiver (home theatre) is set to on, you can hear sound output from the TV’s xoptical jack. When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theatre receiver. When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the home theatre receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theatre.
H
Headphones headphones are connected, the sound from the built-in speakers will be disabled.
Sound function may be restricted when connecting headphones to the TV.
x
Headphone volume and TV volume are adjusted separately.
x
: You can connect your headphones to the headphones output on your set. While the
DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume
OPTICAL
Digital Audio
System
Headphone
CONNECTIONS COMMON INTERFACE Slot
To watch paid channels, the “CI or CI+ CARD” must be inserted.
If you do not insert the “CI or CI+ CARD,” some channels will y display the message “Scrambled Signal”.
The pairing information containing a telephone number, the “CI or y CI+ CARD” ID the Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider.
When the configuration of channel information has finished, the y message “Updating Completed” is displayed, indicating the channel list is updated.
NOTE
You must obtain a “CI or CI+ CARD” from a local cable service provider.
x
When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may
x
cause damage to it. Insert the “CI or CI+ CARD” in the direction marked on the card.
x
The location of the xCOMMON INTERFACE slot may be different depending on the model. “CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer.
x
If you have any problems, please contact a service provider.
x
English
8
9
English
02 Connections
Changing the Input Source
Source List
Use to select TV or other external input sources such as DVD / Blu-ray players / cable box / STB satellite receiver connected to the TV.
TV / Ext.1 / Ext.2 / AV / Component / PC / HDMI1/DVI / HDMI2 / HDMI3 / HDMI4 / USB
In the
Source List, connected
inputs will be highlighted.
Ext.1
and Ext.2 always stay activated.
Basic Features
Edit Name
VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name
the device connected to the input jacks to make your input source selection easier.
When a PC with a resolution of 1920 x 1080 @
60Hz is connected to the HDMI IN 1(DVI) port, you should set to DVI PC mode under Edit Name.
When connecting an HDMI/DVI cable to the
IN 1(DVI) port, you should set to DVI PC or DVI
Devices mode under Edit Name.
HDMI
How to Navigate Menus
Before using the TV, follow the steps below to learn how to navigate the menu and select and adjust different functions.
1
2
3
1 MENU button: Displays the main on-screen menu. 2 ENTER
3 RETURN button: Returns to the previous menu. 4 EXIT button: Exits the on-screen menu.
E
select an item. Confirm the setting.
/ Direction button: Move the cursor and
4
How to Operate the OSD (On Screen Display)
The access step may differ depending on the selected menu.
MENU
1
/ Select an icon with the or
2
ENTER
3
/
4
/
5
ENTER
6
EXIT
The main menu options appears on
m
the screen:
Picture, Sound, Channel, Setup, Input, Application, Support.
button.
E
Press ENTERE to access the sub­menu.
Select the desired submenu with the or button.
Adjust the value of an item with the or button. The adjustment in the OSD may differ depending on the selected menu.
E
Press ENTERE to complete the configuration.
Press EXIT.
e
7
Basic Features
DTV Air 800 five
Family Affairs 18:00 - 18:30
Drama
Tanya confesses all to a stunned Babs. Conrad is anxious to hear...
18:30 19:15
Today Today
)
Family Affairs
)
Dark Angel
800 800
five five
800 five
DTV Air 800 five
Home and Away 18:00 - 18:30
Drama
Dani is devastated when scott makes clear his views on marriage...
27 28 800 24 16 6
Discovery DiscoveryH&L five price-drop.tv QVC R4DTT
American Chopper
Programmes resume at 06:00 Home and... No Information QVC Selection No Information
Tine Team
Fiv...
Today 18:00 - 19:00 19:00 - 20:00
)
Family Affairs
)
Dark Angel
800 five
Using the INFO button (Now & Next guide)
The display identifies the current channel and the status of certain audio-video settings.
The Now & Next guide shows daily TV programme information for each channel according to the broadcasting time.
Scroll y ,  to view information for a desired programme while watching the current channel.
Scroll y ,  to view information for other channels. If you want to move to the currently selected channel, press the ENTER
abc1
DTV Air
15
E
button.
Unclassified No Detaild In formation

18:00 ~ 6:00
18:11 Thu 6 Jan
E ' Information
Planning Your Viewing
Guide
The EPG (Electronic Programme Guide) information is provided by broadcasters. Using programme schedules provided by broadcasters, you can specify programmes you want to watch in advance so that the channel automatically changes to the selected programme channel at the specified time. Programme entries may appear blank or out of date depending on a channel status.
Using Channel View
Using Scheduled View
Guide
Scheduled View
View Mode
2:10 Tue 1 Jun
Information
E
1 4 6
1
Red (View Mode): View the list of programmes that
are playing now or coming up.
2
Yellow (+24 hours): Viewing the list of programmes to
be broadcasted after 24 hours.
3
Blue (Ch.Mode): Select the type of channels you want
to display on the Channel View window.
The Ch. Mode differs according to the antenna source.
4 (Information): Displays details of the selected
programme.
5
(Page): Moves to the previous / next page.
6 ENTER
E
button
When selecting the current programme, you can – watch the selected programme.
When selecting the future programme, you can – reserve to watch the selected programme. To cancel the schedule, press the ENTER
E
button again and
select Cancel Schedules.
Cancel
Guide
Channel View - TV
View Mode
+24 Hours Ch. Mode
1 2 3 4 5 6
10
English
Information k
2:10 Tue 1 Jun
E

11
English
03 Basic Features
Channel Manager
B
c 1 1futech c 2 * 24ore.tv
15 abc1
3 BBC World 23 bid-up.tv 33 Boonerang 32 Cartoon Nwk
5 Class News 4 \ Coming Soon 27 Discovery
All
TV
Radio Data/Other Analogue
r
c 1 1futech c 2 * 24ore.tv
15 abc1
3 BBC World 23 bid-up.tv 33 Boonerang 32 Cartoon Nwk
5 Class News 4 \ Coming Soon 27 Discovery
All
TV
Radio Data/Other Analogue
r
Delete or set favourites channels and use the programme guide for digital broadcasts. Select a channel in the Channels, My Channels or Scheduled screen.
Channels
Air Antena B Zoom Select kT Tools
Channels: Shows the channel list according to
*
My Channels: Shows the group of the channel.
Scheduled: Shows all the currently reserved
Using the colour buttons with the
Red (Antenna): Toggle among Air or Cable.
x
Green (Zoom): Enlarges or shrinks a channel
x
number.
Yellow (Select): Select desired channels and press
x
the Yellow button to set all the selected channels at the same time. The c mark appears to the left of the selected channels.
(Page): Move to next or previous page.
x
T x (Tools): Displays the Channel Manager option
menu. (The Options menus may differ depending on the situation.)
Channel Status Display Icons
channel type.
programmes.
Channel Manager
Using ¦ Favourite Channels
*
My Channels
(in Channel Manager) Shows all favourite channels.
Edit My Channels channels to desired my channels group.
*
” symbol will be displayed and the channel will
The “ be set as a my channel.
1. Select a channel and press the TOOLS button.
2. Add or delete a channel in the my channel groups
you want among 1, 2, 3 and 4.
One or more groups can be selected.
x
3. After you have changed the settings, the channel list for each group can be viewed in My Channels.
Channels
Air Antena B Zoom Select kT Tools
t
: You can set the selected
Edit My Channels

Delete Deselect All Select All
d
Icons Operations
An Analogue channel.
A
c
(
)
A channel selected. A channel set as a Favourite.
*
A programme currently being broadcast. A locked channel.
\
A reserved programme.
Basic Features
Channel Menu
¦ Retuning channels
Antenna (Air / Cable)
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system).
t
Country
The PIN input screen appears. Enter your 4 digit PIN number.
Analogue Channel : Change the country for analogue channels.
Auto Store
Scans for a channel automatically and stores in the TV.
Automatically allocated programme numbers may not correspond to actual or desired programme numbers. If a channel is locked using the Child Lock function, the PIN input window appears.
Antenna Source (Air / Cable) : Select the antenna source to memorise.
Channel Source (Digital & Analogue / Digital / Analogue): Select the channel source to memorise.
When selecting Cable Digital & Analogue or Digital: Provide a value to scan for cable channels.
Search Mode (Full / Network / Quick): Scans for all channels with active broadcast stations and stores them in the TV.
If you set
Network ID, Frequency, Modulation, Symbol Rate manually by press the button on the remote
control.
Network (Auto / Manual): Selects the Network ID setting mode among Auto or Manual.
Network ID: When Network is Manual, you can set up Network ID using the numeric buttons.
Frequency: Displays the frequency for the channel.
(differs in each country)
Modulation: Displays available modulation values. Symbol Rate: Displays available symbol rates.
Quick, you can set up Network,
Manual Store
Scans for a channel manually and stores in the TV.
If a channel is locked using the
the PIN input window appears. Digital Channel : When scanning has finished, channels
are updated in the channel list.
When selecting Antenna Air: Channel, Frequency, Bandwidth.
When selecting
Modulation, Symbol Rate. Analogue Channel (Programme, Colour System,
Sound System, Channel, Search, Store): If there
is abnormal sound or no sound, reselect the sound standard required.
Channel mode
P x (programme mode): When tuning is complete,
the broadcasting stations in your area have been assigned to position numbers from P0 to P99. You can select a channel by entering the position number in this mode.
C
(aerial channel mode) / S (cable channel mode):
x
These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel.
Antenna Cable: Frequency,
Child Lock function,
¦ Editing channels
Channel Manager Option Menu (in Channel Manager)
1. Select a channel and press the TOOLS button.
2. Edit the channel name or number using the Edit Channel Name or Edit Channel Number menu.
Edit Channel Name (analogue channels only): Assign
your own channel name. Edit Channel Number (digital channels only): Edit the
number by pressing the number buttons desired.
Other Features ¦
Cable Search Option
(depending on the country) Sets additional search options such as the frequency and
symbol rate for a cable network search.
Freq.Start / Freq.Stop : Set the start or stop frequency (differs in each country)
Modulation : Displays available modulation values. Symbol Rate : Displays available symbol rates.
12
English
13
English
03 Basic Features
Channel Manager Option Menu
(in Channel Manager) Set each channel using the Channel Manager menu options
(Lock / Unlock, Timer Viewing, Sort, Delete, Select All / Deselect All). Option menu items may differ depending on the channel status.
1. Select a channel and press the TOOLS button.
2. Select a function and change its settings. Lock / Unlock : Lock a channel so that the channel
cannot be selected and viewed.
NOTE
This function is available only when the xChild Lock is set to On.
The PIN input screen appears. Enter your 4-digit PIN,
x
the default of which is “0-0-0-0”. Change the PIN using the Change PIN option.
Timer Viewing : You can set a desired channel to be displayed automatically at the intended time. Set the current time first to use this function.
When a digital channel is selected, press the
button to view the digital Programme.
Sort (analogue channels only): This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using the auto store.
Delete : You can delete a channel to display the channels you want.
Select All / Deselect All : Select all the channels or deselect all the selected channels in the channel manager.
Scheduled
(in Channel Manager) You can view, modify or delete a show you have reserved to
watch.
Change Info : Change a show you have reserved to watch.
Cancel Schedules : Cancel a show you have reserved to watch.
Information : Display a show you have reserved to watch. (You can also change the reservation information.)
Select All / Deselect All : Select or deselect all reserved programmes.
Channel List
You can see all the channels searched.
Channel List Transfer
Imports or exports the channel map. You should connect a USB storage to use this function.
The PIN number input screen appears. Enter your
digit PIN number. The default PIN number of a new TV set is ‘0-0-0-0’.
Import from USB : Import channel list from USB. Export to USB : Export channel list to USB.
4
Fine Tune
(analogue channels only) If the signal is weak or distorted, fine tune the channel
manually.
Fine tuned channels are marked with an asterisk “*”.
To reset the fine-tuning, select Reset.
Picture Menu
Changing the Preset Picture Mode ¦
Mode
Select your preferred picture type.
t
Dynamic : Suitable for a bright room. Standard : Suitable for a normal environment. Natural : Suitable for reducing eye strain.
Natural
Movie : Suitable for watching movies in a dark room.
is not available in PC mode.
Adjusting picture settings ¦
Backlight / Contrast / Brightness / Sharpness / Colour / Tint (G/R)
Your television has several setting options for picture quality control.
NOTE
In analogue xTV, Ext., AV modes of the PAL system, the Tint (G/R) function is not available.
In PC mode, you can only make changes to
x
Backlight, Contrast and Brightness. Settings can be adjusted and stored for each
x
external device connected to the TV. Lowering picture brightness reduces power
x
consumption.
Basic Features
Economical Solutions ¦
ECO Solution
■ Energy Saving (Off / Low / Medium / High / Picture Off / Auto)
in order to reduce power consumption. If you select Picture Off, the screen is turned off, but the sound remains on. Press any button except volume button to turn on the screen.
ECO Sensor (Off / On) : To enhance your power savings; the picture settings will automatically adapt to the light in the room.
Min Backlight: When ECO sensor is On, the minimum screen brightness can be adjusted manually.
No Signal Power Off (Off / 15 min / 30 min / 60 min) : Activates the Stand-by mode, in the case of “No Signal” or “Check Signal Cable” status for a certain period of time defined by the user.
Changing the Picture Options ¦
t
If you adjust the
be set to Off.
Eco Sensor is On, the display brightness
If may change (become slightly darker or brighter) depending on the surrounding light intensity.
Disabled when the PC is in power saving mode.
: Adjust the brightness of the TV
Backlight, the Eco Sensor will
Advanced Settings
(available in Standard / Movie mode) You can adjust the detailed setting for the screen including
colour and contrast.
In PC mode, you can only make changes to Contrast, Gamma and White Balance.
Advanced Settings
 
Dynamic Contrast : Medium Shadow Detail : 0 Gamma : 0
 
 
Colour Space : Native
Black Tone (Off / Dark / Darker / Darkest) : Select the black level to adjust the screen depth.
Dynamic Contrast (Off / Low / Medium / High) : Adjust the screen contrast.
Shadow Detail (-2~+2) : Increase the brightness of dark images.
Disabled under PC mode.
Gamma : Adjust the primary colour intensity.
U Move E Enter R Return
Dynamic
Expert Pattern (Off / Pattern 1 / Pattern 2) : By
running the Expert Pattern function, the picture can be calibrated without a generator or filter. If the OSD menu disappears or a menu other than the Picture menu is opened, the calibration is saved and the Expert Pattern window disappears.
While the
output. Only enabled in DTV, Component and HDMI
modes.
RGB Only Mode (Off / Red / Green / Blue): You can adjust Colour or Tint of Red, Green or Blue for the picture from an external device (DVD player, home theatre, etc.).
Colour Space (Auto / Native / Custom) : Adjust the range of colours available to create the image. To adjust
Colour, Red, Green, Blue and Reset, set Colour Space to Custom.
White Balance : Adjust the colour temperature for a
more natural picture. R-Offset / G-Offset / B-Offset: Adjust each colour’s
(red, green, blue) darkness. R-Gain/G-Gain/B-Gain: Adjust each colour’s
(red, green, blue) brightness.
Reset: Resets the White Balance to it’s default settings. 10p White Balance (Off / On) : Controls the white
balance in 10 point interval by adjusting the red, green, and blue brightness.
Available when the picture mode is set to and when the external input is set to HDMI or Component.
Some external devices may not support this
function.
Interval: Select interval to adjust. Red: Adjust the red level. Green: Adjust the green level. Blue: Adjust the blue level. Reset: Resets the 10p White Balance to its default
Flesh Tone : Emphasize pink “Flesh Tone.” Edge Enhancement (Off / On) : Emphasize object
boundaries. xvYCC (Off / On) : Setting the xvYCC mode on
increases detail and colour space when watching movies from an external device (e.g. DVD player) connected to the HDMI or Component IN jacks.
Available when the picture mode is set to and when the external input is set to HDMI or Component.
Some external devices may not support this
function.
Expert Pattern is running, sound is not
Movie
settings.
Movie
14
English
15
English
03 Basic Features
Picture Options
In PC mode, you can only make changes to the Colour
Ton e, Size, Digital Noise Filter and Auto Protection Time.
Picture Options
      
Digital Noise Filter : Auto
 
 
 
Colour Tone (Cool / Normal / Warm1 / Warm2)
Warm1
picture mode is Dynamic. Settings can be adjusted and stored for each
external device connected to an input on the TV.
Size : Your cable box/satellite receiver may have its own set of screen sizes as well. However, we highly recommend you use 16:9 mode most of the time.
Auto Wide: Automatically adjusts the picture size to the 16:9 aspect ratio.
16:9 : Adjusts the picture size to 16:9 for DVDs or wide broadcasting.
Wide Zoom: Magnifies the picture size more than 4:3.
Adjusts the Position by using
Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size.
Adjusts the Position or Size by using
4:3 : The default setting for a movie or normal broadcasting.
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and centre of the screen may cause image retention(screen burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are input.
NOTE
After selecting xScreen Fit in HDMI (1080i / 1080p) or Component (1080i / 1080p) mode, you may need to center the picture:
1. Press the or button to select Position.
2. Press the ENTER
3. Press the or button to move the
picture.
U Move E Enter R Return
or Warm2 will be deactivated when the
,  buttons.
,  button.
E
button.
Depending on the input source, the picture size
x
options may vary. The available items may differ depending on the
x
selected mode. In PC mode, only
x
adjusted. Settings can be adjusted and stored for each
x
external device connected to an input of the TV. If you use the
x
input, 1 line will be cut at the top, bottom, left and right as in the overscan function.
Screen Mode (16:9 / Wide Zoom / Zoom / 4:3): Available only when picture size is set to Auto Wide. You can determine the desired picture size at the 4:3 WSS (Wide Screen Service) size or the original size. Each European country requires different picture size.
Not available in PC, Component or HDMI mode.
Digital Noise Filter (Off / Low / Medium / High / Auto / Auto Visualisation): When the broadcast signal is
weak, some static and ghosting may appear. Select one of the options until the best picture is displayed.
Auto Visualisation: When changing analogue channels, displays signal strength.
Only available for analogue channels. When bar is green, you are receiving the best
possible signal.
MPEG Noise Filter (Off / Low / Medium / High / Auto): Reduces MPEG noise to provide an improved
picture quality.
Disabled under PC mode.
HDMI Black Level (Normal / Low) : Selects the black level on the screen to adjust the screen depth.
Available only in HDMI mode (RGB signals).
Film Mode (Off / Auto1 / Auto2) : Sets the TV to automatically sense and process film signals from all sources and adjust the picture for optimum quality.
Available in TV, AV, COMPONENT (480i / 1080i)
and HDMI (480i / 1080i).
100Hz Motion Plus (Off / Clear / Standard / Smooth / Custom / Demo) : Removes drag from fast scenes with
a lot of movement to provide a clearer picture.
If you enable appear on the screen. If this occurs, set 100Hz
Motion Plus to Off.
Blur Reduction: Adjusts the blur reduction level from
video sources. Judder Reduction: Adjusts the judder reduction level
from video sources when playing films.
Reset: Reset the custom settings. Auto Protection Time (2 hours/4 hours/8 hours/10
hours/ Off) : If the same image remains on the screen,
Auto Screen Burn Protector will work.
16:9 and 4:3 modes can be
Screen Fit function with HDMI 720p
100Hz Motion Plus, noise may
Picture Reset (OK / Cancel)
Resets your current picture mode to its default settings.
Basic Features
Setting up the TV with Your PC ¦
Set the input source to PC.
Auto Adjustment
Adjust frequency values/positions and fine tune the settings automatically.
Not available when connecting through HDMI/DVI cable.
t
Screen
Coarse / Fine : Removes or reduces picture noise. If the
noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Fine­tune again. After the noise has been reduced, readjust the picture so that it is aligned to the centre of screen.
Position : Adjust the PC screen position with direction button ( / / / ).
Image Reset : Resets the image to default settings.
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP) Depending on the version of Windows and the video card,
the actual screens on your PC may differ in which case the same basic set-up information will almost always be applied. (If not, contact your computer manufacturer or Samsung Dealer.)
1. Click on “Control Panel” on the Windows start menu.
2. Click on “Appearance and Themes” in the “Control
Panel” window and a display dialog-box will appear.
3. Click on “Display” and a display dialog box will appear.
4. Navigate to the “Settings” tab on the display dialog-box.
The correct size setting (resolution) [Optimum: 1920 X y 1080 pixels]
If a vertical-frequency option exists on your display y settings dialog box, the correct value is “60” or “60 Hz”. Otherwise, just click “OK” and exit the dialog box.
Sound Menu
Changing the Preset Sound Mode ¦
SRS TheaterSound
Standard : Selects the normal sound mode. Music : Emphasizes music over voices. Movie : Provides the best sound for movies. Clear Voice : Emphasizes voices over other sounds. Amplify : Increase the intensity of high-frequency sound
to allow a better listening experience for the hearing impaired.
t
Adjusting sound settings ¦
Equalizer
Adjusts the sound mode.
Balance L/R: Adjusts the balance between the right and left speaker.
100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the level of specific bandwidth frequencies.
Reset : Resets the equalizer to its default settings.
Sound Systems, Etc. ¦
SRS TruSurround HD (Off / On)
(standard sound mode only) This function provides a virtual 5.1 channel surround sound
experience through a pair of speakers or headphones using HRTF (Head Related Transfer Function) technology.
t
SRS TruDialog (Off / On)
(standard sound mode only) This function allows you to increase the intensity of a voice
over background music or sound effects so that dialog can be heard more clearly when viewing a show.
Audio Language
(digital channels only) Change the default value for audio languages.
The available language may differ depending on the
broadcast.
Audio Format (MPEG / Dolby Digital 5.1)
(digital channels only) When sound is emitted from both the main speaker and the
audio receiver, a sound echo may occur due to the decoding speed difference between the main speaker and the audio receiver. In this case, use the TV Speaker function.
Audio Format
broadcast. 5.1ch Dolby digital sound is only available when connecting an external speaker through an
optical cable.
option may differ depending on the
16
English
17
English
03 Basic Features
Audio Description
(not available in all locations) (digital channels only)
This function handles the Audio Stream for the AD (Audio Description) which is sent along with the Main audio from the broadcaster.
Audio Description (Off / On) : Turn the audio description function on or off.
Volume : Adjust the audio description volume.
Auto Volume (Off / Normal / Night)
To equalize the volume level on each channel, set to Normal.
Night : This mode provides an improved sound
experience compared to Normal mode, making almost no noise. It is useful at night.
Speaker Select (External speaker / TV speaker)
A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver. In this case, set the TV to External Speaker.
Speaker Select is set to External Speaker, the
When volume and MUTE buttons will not operate and the sound settings will be limited.
Speaker Select is set to External Speaker, you
When should use these settings.
TV
Speaker: Off , External Speaker: On
x
Speaker Select is set to TV Speaker, you
When should use these settings.
TV
Speaker: On , External Speaker: On
x
If there is no video signal, both speakers will be mute.
SPDIF Output : SPDIF (Sony Philips Digital InterFace) is used to provide digital sound, reducing interference going to speakers and various digital devices such as a DVD player.
Audio Format: During the reception of a digital TV broadcast, you can select the Digital Audio output (SPDIF) format from the options PCM or Dolby Digital.
By connecting to 5.1ch speakers in a Dolby Digital setup, maximize your interactive 3D sound experience.
Audio Delay: Correct audio-video mismatch, when watching TV or video, and listening to digital audio output using an external device such as an AV receiver.
Dolby Digital Comp (Line / RF) : This function minimizes signal disparity between a dolby digital signal and a voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound).
Line to obtain dynamic sound, and RF
Select to reduce the difference between loud and soft sounds at night time.
Line: Set the output level for signals greater or less than
-31dB (reference) to either -20dB or -31dB. RF: Set the output level for signals greater or less than
-20dB (reference) to either -10dB or -20dB.
Sound Reset (OK / Cancel)
Reset all sound settings to the factory defaults.
Selecting the Sound Mode ¦
When you set to Dual l-ll, the current sound mode is displayed on the screen.
Additional Setting
(digital channels only)
DTV Audio Level (MPEG / HE-AAC) : This function allows you to reduce the disparity of a voice signal (which is one of the signals received during a digital TV broadcast) to a desired level.
According to the type of broadcast signal,
/ HE-AAC can be adjusted between -10dB and 0dB.
To increase or decrease the volume, adjust
between the range 0 and -10 respectively.
MPEG
Audio
Type
A2
Stereo
NICAM
Stereo
If the stereo signal is weak and an automatic switching,
occurs, then switch to the mono. Only activated in stereo sound signal.
Only available when the Input source is set to TV.
Mono Mono
Stereo
Dual
Mono Mono
Stereo
Dual
Dual I-II Default
Stereo Mono Dual I Dual II
Mono Stereo
Mono Dual I
Dual II
Automatic
change
Dual I
Automatic
change
Dual I
Basic Features
10 TV ATV0
00 00
00 00
Setup Menu
Setting the Time ¦
Time
Clock : Setting the clock is for using various timer
features of the TV.
O
The current time will appear every time you press the INFO button.
If you disconnect the power cord, you have to set the clock again.
Clock Mode (Auto / Manual)
Depending on the broadcast station and signal, the auto time set up may not be correct. In this case, set the time manually.
The antenna must be connected in order to set
the time automatically.
Clock Set: Set the Day, Month, Year, Hour and Minute manually.
Available only when
Manual.
Time Zone: You can select your time zone.
This function is only available when is set to Auto.
Depending on the broadcast station and signal,
the auto time may not be set correctly. If this occurs, set the time manually.
Using the ¦ Sleep Timer
Sleep Timer
after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes).
Setting the On / Off ¦ Timer
Timer 1 / Timer 2 / Timer 3 : Three different on / off
timer settings can be made. You must set the clock first.


Volume
Repeat
t
To cancel
Inactivate
Inactivate

Sleep Timer, select Off.
Source Antenna Channel
Sun Mon Tue  Thu Fri Sat
Clock Mode is set to
: Automatically shuts off the TV
Timer 1
L
Move
U Adjust E
Enter R Return
Clock Mode
On Time / Off Time: Set the hour, minute, and activate
/ inactivate. (To activate timer with the setting you have chosen, set to Activate.)
Volume: Set the desired volume level. Source: Select TV or USB content to be played when
the TV is turned on automatically. (USB can be selected only when a USB device is connected to the TV)
Antenna (when the Source is set to TV): Select ATV or DTV.
Channel (when the Source is set to TV): Select the
desired channel. Contents (when the Source is set to USB): Select a
folder in the USB device containing music or photo files to be played when the TV is turned on automatically.
If there is no music file on the USB device or the folder containing a music file is not selected, the Timer function does not operate correctly.
When there is only one photo file in the USB
device, the Slide Show will not play. If a folder name is too long, the folder cannot be
selected. Each USB you use is assigned its own folder.
When using more than one of the same type of USB, make sure the folders assigned to each USB have different names.
Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at you convenience. If you
select Manual, you can set up the day you want to activate the timer.
c
mark indicates the day is selected.
The
Auto Power Off (available only when the TV is turned on by Timer): The TV will be automatically turned off after 3 hours of being left idle to prevent overheating.
Locking Programs ¦
Security
The PIN input screen appears before the setup screen.
Enter your 4-digit PIN, the default of which is “0-0-0-0”.
Change the PIN using the Change PIN option.
Child Lock (Off / On): Lock channels in Channel Manager, to prevent unauthorized users, such as children, from watching unsuitable programme.
Available only when the
Parental Lock (Parental Rating) : Prevent unauthorized users, such as children, from watching unsuitable programme with a user-defined 4-digit PIN code.
Allow All: Unlock all TV ratings.
The items of the country.
Parental Lock differs depending on
Input source is set to TV.
18
English
19
English
03 Basic Features
Change PIN: Change your personal ID number required
to set up the TV.
If you forget the PIN code, press the remote
control buttons in the following sequence, which resets the PIN to “0-0-0-0”: POWER (off)
MUTE 8 2 4 POWER (on).
Other Features ¦
Language
Menu Language : Set the menu language. Teletext Language : Set a desired language for teletext.
English is the default in cases where the selected
language is unavailable in the broadcast.
Preference (Primary Audio Language / Secondary Audio Language / Primary Subtitle Language / Secondary Subtitle Language / Primary Teletext Language / Secondary Teletext Language): Select
a language, which will be the default language when a channel is selected.
Subtitle
Use this menu to set the Subtitle mode.
The subtitle feature does not work in
Component or HDMI modes. Subtitle (Off / On) : Switches subtitles
on or off. Mode (Normal / Hearing Impaired) :
Sets the subtitle mode. Subtitle Language : Sets the subtitle language.
If the programme you are watching does not
support the Hearing Impaired function, Normal automatically activates even if the Hearing Impaired mode is selected.
English is the default in cases where the selected
language is unavailable in the broadcast.
Digital Text (Disable / Enable) (UK only)
If the programme broadcasts with digital text, this feature is enabled.
Network (Network Type / Network Setup / Network Test / Samsung Wireless Link / SWL connect)
For details on setting up options, refer to the “Network Connection” instructions. (P. 23)
General
Game Mode (Off / On) : When connecting to a game
console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by selecting game mode.
NOTE
Precautions and limitations for x game mode
To disconnect the game console and connect – another external device, set Game Mode to Off in the setup menu.
If you display the TV menu in Game Mode, the – screen shakes slightly.
Game Mode
x
After connecting
x
to On to prevent poor picture quality. If
Game Mode is On: Picture mode is set to
x
Standard and Sound mode is set to Custom.
BD Wise (Off / On) : Provides the optimal picture quality
for Samsung DVD, Blu-ray and Home Theatre products which support BD Wise. When BD Wise is turned On, the picture mode is automatically changed to the optimal resolution.
Available when connecting Samsung products
that support BD Wise through a HDMI cable.
Menu Transparency (Bright / Dark) : Set the Transparency of the menu.
Melody (Off / Low / Medium / High): Set so that a melody plays when the TV is turned on or off.
is not available in TV and TV mode.
the game console, set Game Mode
Common Interface
CI Menu : This enables the user to select from the CAM-
provided menu. Select the CI Menu based on the menu PC Card.
Application Info. : View information on the CAM inserted into the CI slot and on the “CI or CI+ CARD” which is inserted into the CAM. You can install the CAM anytime whether the TV is on or off.
1. Purchase a CI CAM module at your nearest dealer or by
phone.
2. Firmly insert the “CI or CI+ CARD” into the CAM in the
direction of the arrow.
3. Insert the CAM with the “CI or CI+ CARD” into the
common interface slot, in the direction of the arrow so that it aligns parallel with the slot.
4. Check if you can see a picture on a scrambled signal
channel.
Wireless Remote Control (On / Off)
Turn wireless remote controls on or off or give permission to wireless remote controls.
Basic Features
Picture In Picture ( ¦ PIP)
t
PIP
Watches simultaneously the TV tuner and one external video source. PIP (Picture-in-Picture) does not function in the same mode.
NOTE
If you turn the TV off while watching in xPIP mode, the PIP window will disappear.
You may notice that the picture in the PIP window
x
becomes slightly unnatural when you use the main screen to view a game or karaoke.
While
Internet@TV is in operation, the PIP function
x
cannot be used. PIP settings
x
Main picture Sub picture Component, HDMI1/DVI,
HDMI2, HDMI3, HDMI4, PCTV
PIP (Off / On) : Activate or deactivate the PIP function. Channel : Select the channel for the sub-screen. Size (
Õ
/ Ã): Select a size for the sub-picture.
Position (
sub-picture. Sound Select (Main / Sub) : You can choose the
desired sound (Main / Sub) in PIP mode.
Ã
/ – / — / œ): Select a position for the
Using Data Service ¦
Allows the user to use information (text, still images, graphics, documents, software, etc.) transmitted via broadcast media.
Auto Run Data Service (On / Off)
Sets whether or not to automatically run data service. Auto Run Data Service automatically runs data service without user intervention.
If any other secondary function is under way,
Data Service may not work.
Using Data Service
If the channel you are currently watching provides data service, you can enjoy a variety of data services by pressing the or red
Provided Data Service information may vary depending on broadcast.
While using data service, changing the channel using the numeric buttons may not be possible depending on the service.
button.
Auto Run
1. Press the button. Select a desired service by
pressing the wheel (///) and OKE buttons.
If
Auto Run Data Service is On, the data service
will automatically run with loading banner. In this case, the button does not work.
2. Press the red button. The data service screen will be
displayed.
3. Move to a desired option by pressing the wheel
(///) button on the data service screen and then press OKE. The selected service will be started.
If a Colour button of a certain function appears on
the screen, you can use the offered function by pressing the corresponded button.
4. If you press EXIT button, data service will be closed.
Main Data Service buttons and their functions
Button Operation
Displays the Data Service list and
(Data Service)
BACK
Colour Button
Symbol
TEXT
Wheel
(///
OK
E
EXIT
immediately starts Data Service. Returns to the previous screen.
R
Perform functions corresponding to each Colour button image displayed on the screen during Data Service.
Operations may differ depending on
the service provider.
Text can be inputted using the numbers and letters printed on and above the numeric keys on the remote control. If you input the numeric keys on the remote control one by one into the blank where the cursor is located on the text input screen, the corresponding lettering, numbers or special characters will be displayed.
e.g., If you press the number 3 key in rapid succession, then the assigned letters (D, E, and F) and the number 3 will alternately appear in order of input.
Switches to teletext mode or Returns to the previous screen.
Operations may differ depending on
the service provider.
Moves the Data Service menu up, down, left and right.
Runs a selected item. Stops a running Data Service.
e
20
English
21
English
03 Basic Features
Support Menu
Self Diagnosis
Picture Test (Yes / No) : Use to check for picture
problems and if the problem continues to occur check the colour pattern.
Sound Test (Yes / No) : Use the built-in melody sound to check for sound problems.
If you hear no sound from the TV’s speakers, before performing the sound test, make sure
Speaker Select is set to TV speaker in the Sound menu.
The melody will be heard during the test even if
Speaker Select is set to External Speaker or the sound is muted by pressing the MUTE button.
Signal Information : (digital channels only) HDTV channel’s reception quality is either perfect or the channels are unavailable. Adjust your antenna to increase signal strength.
Troubleshooting : If the TV seems to have a problem, refer to this description.
If none of these troubleshooting tips apply, contact
the Samsung customer service centre.
Software Upgrade
Software Upgrade can be performed via a broadcasting
signal or by downloading the latest firmware from samsung. com to a USB memory device.
Current Version the software already installed in the TV.
Software is represented as “Year/Month/Day_Version”.
Software Upgrade
Current Version 2010/01/18_000001
  
By Channel Standby Mode Upgrade : 2 hours later
Alternative Software ----/--/--/--_------
U Move E Enter R Return
Installing the Latest Version
By USB: Insert a USB drive
containing the firmware upgrade file, downloaded from www.samsung.com, into the TV. Please be careful not to disconnect the power or remove the USB drive until upgrades are complete. The TV will be turned off and on automatically after completing the firmware upgrade. When software is upgraded, video and audio settings you have made will return to their default settings. We advise you to write down your settings so that you can easily reset them after the upgrade.
By Online : Upgrade the software using the Internet.
First, configure your network. For detailed procedures on using the Network Setup, refer to the “Network Connection” instructions.
If the Internet connection does not operate
properly, the connection may be broken. Please retry downloading. If the problem persists, download by USB and upgrade.
By Channel : Upgrade the software using the broadcasting signal.
If the function is selected during the software transmission period, software will be automatically searched and downloaded.
The time required to download the software is
determined by the signal status.
Standby Mode Upgrade : A manual upgrade will be automatically performed at selected time. Since the power of the unit is turned on internally, the screen may be turned on slightly for the LCD product. This phenomenon may continue for more than 1 hour until the software upgrade is complete.
Alternative Software (backup): Displays the Software version downloaded through By Online. During the software upgrading, When the Upgrade will discontinue from last step, this function be activated.
TV Side Panel
or
USB Drive
HD Connection Guide
Refer to this information when connecting external devices to the TV.
Contact Samsung
View this information when your TV does not work properly or when you want to upgrade the software. You can find information regarding our call centres, and how to download products and software.
Advanced Features
Using an HDMI/DVI Cable / a D-sub Cable
Connecting to a PC
DVI OUT
AUDIO OUT
AUDIO OUT
PC OUT
Display Modes (D-Sub and HDMI/DVI Input)
Optimal resolution is 1920 X 1080 @ 60 Hz
Mode Resolution
IBM
MAC
VESA CVT
VESA DMT
VESA GTF
VESA DMT / DTV CEA 1920 x 1080p 67.500 60.000 148.500 +/+
NOTE
640 x 350 31.469 70.086 25.175 +/­720 x 400 31.469 70.087 28.322 -/+ 640 x 480 35.000 66.667 30.240 -/­832 x 624 49.726 74.551 57.284 -/-
1152 x 870 68.681 75.062 100.000 -/-
720 x 576 35.910 59.950 32.750 -/+ 1152 x 864 53.783 59.959 81.750 -/+ 1280 x 720 56.456 74.777 95.750 -/+ 1280 x 960 75.231 74.857 130.000 -/+
640 x 480 31.469 59.940 25.175 -/-
640 x 480 37.861 72.809 31.500 -/-
640 x 480 37.500 75.000 31.500 -/-
800 x 600 37.879 60.317 40.000 +/+
800 x 600 48.077 72.188 50.000 +/+
800 x 600 46.875 75.000 49.500 +/+ 1024 x 768 48.363 60.004 65.000 -/­1024 x 768 56.476 70.069 75.000 -/­1024 x 768 60.023 75.029 78.750 +/+ 1152 x 864 67.500 75.000 108.000 +/+
1280 x 1024 63.981 60.020 108.000 +/+ 1280 x 1024 79.976 75.025 135.000 +/+
1280 x 800 49.702 59.810 83.500 -/+ 1280 x 800 62.795 74.934 106.500 -/+ 1280 x 960 60.000 60.000 108.000 +/+ 1280 x 720 45.000 60.000 74.250 +/+ 1360 x 768 47.712 60.015 85.500 +/+ 1440 x 900 55.935 59.887 106.500 -/+ 1440 x 900 70.635 74.984 136.750 -/+
1600 x 1200 75.000 60.000 162.000 +/+ 1680 x 1050 65.290 59.954 146.250 -/+
1280 x 720 52.500 70.000 89.040 -/+
1280 x 1024 74.620 70.000 128.943 -/-
Horizontal Frequency
(KHz)
Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H / V)
For HDMI/DVI cable connection, you must use the xHDMI IN 1(DVI) jack. The interlace mode is not supported.
x
The set might operate abnormally if a non-standard video format is selected.
x
Separate and Composite modes are supported. SOG(Sync On Green) is not supported.
x
22
English
23
English
04 Advanced Features
Network Connection
You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or wireless connection.
Connecting to a Wired Network ¦
You can attach your TV to your LAN using cable in three ways:
You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a Cat y 5 cable. See the diagram below.
The Modem Port on the Wall
You can attach your TV to your LAN by connecting the LAN port on the back of your TV to a IP Sharer which is connected y to an external modem. Use Cat 5 cable for the connection. See the diagram below.
The Modem Port on the Wall
Modem Cable
Depending on how your network is configured, you may be able to attach your TV to your LAN by connecting the LAN y port on the back of your TV directly to a network wall outlet using a Cat 5 cable. See the diagram below. Note that the wall outlet is attached to a modem or router elsewhere in your house.
The Modem Port on the Wall
External Modem
(ADSL / VDSL / Cable TV)
External Modem
(ADSL / VDSL / Cable TV)
(having DHCP server)
LAN Cable
LAN CableModem Cable
IP Sharer
LAN Cable
TV Rear Panel
TV Rear Panel
TV Rear Panel
LAN Cable
If you have a Dynamic Network, you should use an ADSL modem or router that supports Dynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS values your TV needs to access the Internet so you don’t have to enter them manually. Most home networks are Dynamic Networks. Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address, subnet mask, gateway, and DNS values manually on your TV’s Cable Setup Screen when you set up the network connection. To get the IP address, subnet mask, gateway, and DNS values, contact your Internet Service Provider (ISP). If you have a Windows computer, you can also get these values through your computer.
You can use ADSL modems that support DHCP if your network requires a Static IP address. ADSL modems that
support DHCP also let you use Static IP addresses.
Advanced Features
Network Setup (Auto)
Use the Automatic Network Setup when connecting your TV to a network that supports DHCP. To set up your TV’s cable network connection automatically, follow these steps:
How to set up automatically
1. Connect your TV to your LAN as described in the
previous section.
2. Turn on your TV, press the MENU button on your remote, use the orbutton to select Setup, and then press the ENTER
3. Use the or button to select Network in the Setup menu, and then press the ENTER Network screen appears.
 




4. On the Network screen, select Network Type.
5. Set Network Type to Wired.
6. Select Network Setup. The Network Setup screen
appears.
 
  
Gateway :
DNS : Auto
DNS Server :
E
button.
E
Network
:

U Move E Enter R Return
Network Setup
button. The
Network Setup (Manual)
Use the Manual Network Setup when connecting your TV to a network that requires a Static IP address.
Getting the Network Connection Values
To get the Network connection values on most Windows computers, follow these steps:
1. Right click the Network icon on the bottom right of the
screen.
2. In the pop-up menu that appears, click Status.
3. On the dialog that appears, click the Support tab.
4. On the Support Tab, click the Details button. The
Network connection values are displayed.
How to set up manually
To set up your TV’s cable network connection manually, follow these steps:
1. Follow Steps 1 through 6 in the “How to set up
automatically” procedure.
2. Set Internet Protocol Setup to Manual.
3. Press the button on your remote to go to the first
entry field.
4. Enter the IP Address, Subnet Mask, Gateway, and DNS Server values. Use the number buttons on your
remote to enter numbers and the arrow buttons to move from one entry field to another.
5. When done, press the RETURN button on your remote.
6. Select Network Test to check the Internet connectivity.
U Move E Enter R Return
7. Set Internet Protocol Setup to Auto.
8. Auto acquires and enters the needed Internet values
automatically.
9. Wait two minutes, and then press the RETURN button
on your remote.
10. If the Network Function has not acquired the network connection values, go to the directions for Manual.
English
24
25
English
04 Advanced Features
Connecting Wireless Network ¦
To connect your TV to your network wireless, you need a wireless router or modem and a Samsung Wireless LAN Adapter (WIS09ABGN), which you connect to your TV’s back or side panel USB jack. See the illustration below.
To use the SWL(Samsung Wireless Link) function, connect to the USB 1 (HDD) port.
The LAN Port on
the Wall
Samsung’s Wireless LAN adapter is sold separately and is offered by select retailers, Ecommerce sites and Samsungparts. com. Samsung’s Wireless LAN adapter supports the IEEE 802.11A/B/G and N communication protocols. Samsung recommends using IEEE 802.11N. When you play video over a IEEE 802.11B/G connection, the video may not play smoothly.
NOTE
You must use the “Samsung Wireless LAN Adapter” (WIS09ABGN) to use a wireless network.
x
Samsung’s Wireless LAN adapter is sold separately. The WIS09ABGN Wireless LAN adapter is offered by select
x
retailers, Ecommerce sites and Samsungparts.com. To use a wireless network, your TV must be connected to a wireless IP sharer. If the wireless IP sharer supports
x
DHCP, your TV can use a DHCP or static IP address to connect to the wireless network. Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer
x
is currently being used by another device nearby, this will result in interference and communication failure. If you apply a security system other than the systems listed blow, it will not work with the TV.
x
If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or
x
TKIPAES (WPS2Mixed) for your AP, Samsung TVs will not support a connection in compliance with new Wi-Fi certification specifications.
If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button
x
Configuration) or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in either mode.
Keep the Samsung Wireless LAN Adaptor at a distance from the TV. If you watch the TV with the adaptor connected
x
nearby, images may appear corrupted for some channels. If your router, modem, or device is not, it may not connect to the TV via the “Samsung Wireless LAN Adapter.”
x
Connection Methods x: You can setup the wireless network connection on six ways.
Samsung Auto ConfigurationPBC (WPS) – Auto Setup (Using the Auto Network Search function) – Manual Setup
SWL (Samsung Wireless Link) – Ad-Hoc
All of Samsung Wireless LAN Adapter shoud be connected directly to the TV's USB port. USB HUB are not
x
supported.
Wireless IP sharer
Samsung Wireless
LAN Adapter
LAN Cable
TV Side Panel
or
Advanced Features
Network Setup (Samsung Auto Configuration)
This function is available in APs (Access Points) that support Samsung Auto Configuration. If there is no such AP, you can connect through PBC (WPS) or manually.
This function is available when
Wireless Link) set to Off.
You can check for equipment that supports Samsung Auto Configuration on www.samsung.com.
How to set up using Samsung Auto Configuration
1. Place the AP and TV next to each other and turn them on.
Because the booting times of applications differ,
you may have to wait for approximately 2 minutes. If the LAN cable connected the WAN port of AP
during Samsung Auto Configuration, you are able to complete until Internet connection test. If you do not connect, Samsung Auto configuration will check only device connecting of AP (Not check Internet).
2. After 2 minutes, connect the Samsung Wireless LAN Adaptor to the TV. When the Samsung Wireless LAN Adaptor is established, the pop-up window appears.
3. As soon as a connection is established, place the AP in parallel with the Samsung Wireless LAN Adaptor giving a gap no larger than 25cm.
4. Wait until the connection is automatically established.
If the connection fails, reset the AP and then try
again. If Samsung Auto Configuration does not connect
your TV to your AP, a pop-up window appears on the screen notifying you of the failure. Reset the AP, and then try again. If the connection fails again, choose one of the other connection setup methods, PBC (WPS), auto, or manual.
5. After the connection is established, locate the sharer at the desired location.
If the AP settings have been changed or it is the
first time you use the new AP after purchase, you need to set up again beginning from Step 1.
SWL(Samsung
Network Setup (PBC (WPS))
How to set up using PBC (WPS)
If your router has a PBC (WPS) button, follow these steps:
1. Connect your TV to your LAN as described in the
previous section.
2. Turn on your TV, press the MENU button on your remote, use the or button to select Setup, and then press the ENTER
3. Use the or button to select Network in the Setup menu, and then press the ENTER
4. On the Network screen, select Network Type.
5. Set Network Type to Wireless.
6. Select Network Setup. The Network Setup screen
appears.
E
button.
E
button.
Network Setup
     
    
Gateway :
DNS : Auto DNS Server :
U Move E Enter R Return
7. Press the Red button on your remote.
8. Press the PBC (WPS) button on your router within 2
minutes. Your TV player automatically acquires all the network setting values it needs and connects to your network.
9. After the network connection is set up, press the
RETURN button to exit the Network Setup screen.
Network Setup (Auto)
Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted security code called an Access or Security Key. The Security Key is based on a Pass Phrase, typically a word or a series of letters and numbers of a specified length you were asked to enter when you set up security for your wireless network. If you use this method of setting up the network connection, and have a Security Key for your wireless network, you will have to enter the Pass Phrase during the setup process.
How to set up automatically
To set up the wireless connection automatically, follow these steps:
1. Follow Steps 1 through 6 in the “How to set up PBC (WPS)” above.
2. Press the button to select Internet Protocol Setup, and then press the ENTERE button. Press the or button to select Auto, and then press the ENTERE button.
26
English
27
English
04 Advanced Features
3. Press the button to go to Select a Network, and
A B C D E F G
H I J K L M N
O P Q R S T U
V W X Y Z
0~9
Security Key
0 entered
Number
Lower case
B
Delete Space
C
then press the ENTERE button. The Network function searches for available wireless networks. When done, it displays a list of the available networks.
4. In the list of networks, press the or button to select a network, and then press the ENTER
If the AP is set to Hidden (Invisible), you have
to select Add Network and enter the correct Network Na me (SSID) and Security Key to establish the connection.
5. If the Security/PIN pop-up appears, go to Step 6. If the Network Connecting Screen appears, go to Step 10.
6. Press the or button to select Security or PIN. For most home networks, you would select Security (for Security Key). The Security Screen appears.
E
button.
Network Setup
n Move E Enter R Return
7. On the Security screen, enter your network’s Pass Phrase.
You should be able to find the Pass Phrase on
one of the set up screens you used to set up your router or modem.
8. To enter the Pass Phrase, follow these general directions:
Press the number buttons on your remote to enter – numbers.
Use the direction buttons on your remote to move – from button to button on the Security Key screen.
Press the Red button to change case or display – symbols/characters.
To a enter letter or symbol, move to the letter or – symbol, and then press the ENTER
To delete the last letter or number you entered, – press the Green button on your remote.
9. When done, press the Blue button on your remote. The Network Connecting screen appears.
10. Wait until the connection confirmation message is displayed, and then press the ENTER
Network Setup screen re-appears.
11. To test the connection, press the RETURN button to
select Network Test, and then press the ENTER button.
E
button.
E
button. The
E
Network Setup (Ad-Hoc)
You can connect to a mobile device without an access point through the “Samsung Wireless LAN Adapter” by using a peer to peer network.
This function is available when
Wireless Link) is set to Off.
How to connect to new Ad-hoc
1. Follow Steps 1 through 6 in the “How to set up using
PBC (WPS)”. (P. 26)
2. Choose Select a network. A list of devices/networks
appears.
3. While in the device list, press the Blue button on the
remote.
The message
connection with cellphone or PC. The existing network system may have limited functionality. Do you want to change the network connection? is displayed.
4. Input the generated Network Name (SSID) and Security Key into the device you want to connect.
How to connect an existing Ad-hoc device
1. Follow Steps 1 through 6 in the “How to set up using
PBC (WPS)”. (P. 26)
2. Choose Select a network. Then, the device list will be displayed.
3. Select the device you want in the Device list.
4. If security key was applied, input the security key.
If network does not operate normally, check
the Network Name (SSID) and Security Key again. An incorrect Security Key may cause a malfunction.
Ad-hoc is a direct WI-Fi
SWL(Samsung
Network Setup (Manual)
If the other methods do not work, you need to enter the Network setting values manually.
Getting the Network Connection Values
To get the Network setting values on most Windows computers, follow these steps:
1. Right click the Network icon on the bottom right of the screen.
2. In the pop-up menu, click Status.
3. On the dialog that appears, click the Support tab.
4. On the Support tab, click the Details button. The
Network settings are displayed.
Advanced Features
How to set up manually
To enter the Network settings into your TV, follow these steps:
1. Follow Steps 1 through 6 in the “How to set up using
PBC (WPS)”. (P. 26)
2. Press the button to select Internet Protocol Setup, and then press ENTER button to select Manual, and then press ENTER button.
3. Press the button to go to the first entry field (IP Address).
4. Use the number buttons to enter numbers.
5. When done with each field, use the button to move
successively to the next field. You can also use the other arrow buttons to move up, down, and back.
6. Enter the IP Address, Subnet Mask, and Gateway values.
7. Press the or button to go to DNS.
8. Press the button to go to the first DNS entry field.
Enter the numbers as above.
9. When done, press the button to go to Select a Network. Select your network, and then press
ENTER
E
button.
10. Go to Step 4 in the "How to set up automatically" (P. 26), and follow the directions from that point on.
E
button. Press the or
E
Network Setup (SWL (Samsung Wireless Link))
This function lets you connect a Samsung device that supports the PBC (WPS) to your TV. You can connect devices to the TV even if a sharer is not connected to the TV.
To use the Internet@TV, the AP (access point) must be
connected to the wireless network.
If a Samsung Wireless Lan Adapter is connected to the USB 2 port, the network may not operate normally. We recommend to connect to USB 1 (HDD) port.
Only sharers using the 2.4 Ghz band are supported. Sharers using the 5 Ghz band are not supported.
SWL connect
You can directly connect a device that supports the PBC (WPS) to the TV.
This function is available when
Wireless Link) is set to On.
SWL(Samsung
How to connect Samsung Wireless link
For the procedures to establish a connection, refer to the following:
1. Follow Steps 1 through 5 in the “How to set up using
PBC (WPS)”. (P. 26)
2. Select Samsung Wireless Link by using the button and press the ENTER
3. Select SWL connect by using the button and press the ENTER
4. If the “Press the PBC button on the device which supports PBC button to connect within 120 seconds” message appears, press the PBC button on
the device to connect.
5. If the device is connected properly to the TV after starting count on message box then message box will be disappeared automatically.
If Your TV Fails to Connect to the Internet
Your TV may not be able to connect to the Internet because your ISP has permanently registered the MAC address (a unique identifying number) of your PC or modem, which it then authenticates each time you connect to the Internet as a way of preventing unauthorized access. As your TV has a different MAC address, your ISP can not authenticate its MAC address, and your TV can not connect.
To resolve this problem, ask your ISP about the procedures required to connect devices other than a PC (such as your TV) to the Internet.
If your Internet service provider requires an ID or password to connect to the Internet, your TV may not be able to connect to the Internet. If this is the case, you must enter your ID or password when connecting to the Internet.
The Internet connection may fail because of a firewall problem. If this is the case, contact your Internet service
provider. If you cannot connect to the Internet even after you have
followed the procedures of your Internet service provider, please contact Samsung Electronics.
E
For more information, refer to the wireless network
setup manual of the device to be connected.
If the connection fails, please retry after 2 minutes.
button.
E
button to turn it On.
28
English
29
English
Media Play
SUM
04 Advanced Features
Enjoy photos, music and/or movie files saved on

a USB Mass Storage Class (MSC) device and/or your PC.
Videos
Change Device
View Devices E Enter R Return
Connecting a ¦ USB Device
1. Turn on your TV.
2. Connect a USB device containing photo, music and/or movie files to the USB 1
(HDD) or USB 2 jack on the side of the TV.
3. When USB is connected to the TV, popup window appears. Then you can select Media Play.
USB Drive
TV Side Panel
or
¦ Connecting to the PC through network
You can play pictures, music and videos saved on your PC or on your TV through a network connection in the Media Play mode.
If you use “www.samsung.com.”
Media Play through saved file on your PC, you should download “PC Share Manager” and users manual from
LAN
PC
External Modem
(ADSL/VDSL/Cable TV)
TV Side Panel
or
Samsung
Wireless
LAN
Adapter
Wireless IP
sharer
LAN Cable
1. For more information on how to configure your network, refer to ‘Network Connection’.
You are recommended to locate both TV and PC in same subnet. The first 3 parts of the subnet address of the TV and – the PC IP addresses should be the same and only the last part (the host address) should be changed. (e.g. IP Address:
123.456.789.**)
2. Using a LAN cable, connect between the external modem and the PC onto which the Samsung PC Share Manager program will be installed.
You can connect the TV to the PC directly without connecting it through a Sharer (Router).
Advanced Features
Functions that are not supported when connecting to a PC through a network:
The xBackground Music and Background Music Setting functions. Sorting files by preference in the
x
The
(REW) or µ (FF) button while a movie is playing.
x
The Divx DRM, Multi-audio, embedded caption does not supported.
Samsung PC Share manager should be permitted by the firewall program on your PC.
When you use Media Play mode through a network connection, According to functions of the provided server:
The sorting method may vary.
x
The scene search function may not be supported.
x
The xPlay Continuously function, which resumes playing of a video, may not be supported.
The Play Continuously function does not support multiple users. (It will have only memorized the point where the most recent user stopped playing.)
The
x
If you experience any file stuttering issue while playing a video over a wireless network, we recommend using a wired
network. It might not work properly with unlicensed multimedia files.
Need-to-Know List before using Media Play
x x x x
x
x x x x x x x x
x x
x
x x x x
x
(REW), µ (FF) or  (Pause) buttons may not work depending on the content information.
MTP (Media Transfer Protocol) is not supported. The file system supports FAT16, FAT32 and NTFS. Certain types of USB Digital camera and audio devices may not be compatible with this TV. Media Play only supports USB Mass Storage Class (MSC) devices. MSC is a Mass Storage Class Bulk-Only
Transport device. Examples of MSC are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not supported). Devices should be connected directly to the TV’s USB port.
Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss.
Connect a USB HDD to the dedicated port, Do not disconnect the USB device while it is loading. MSC supports MP3 and JPEG files, while a PTP device supports JPEG files only. The higher the resolution of the image, the longer it takes to display on the screen. The maximum supported JPEG resolution is 15360X8640 pixels. For unsupported or corrupted files, the “Not Supported File Format” message is displayed. If the files are sorted by Basic View, up to 1000 files can be displayed in each folder. MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management
(DRM) is a technology that supports the creation of content, the distribution and management of the content in an integrated and comprehensive way, including the protection of the rights and interests of the content providers, the prevention of the illegal copying of contents, as well as managing billings and settlements.
If more than 2 PTP devices are connected, you can only use one at a time. If more than two MSC devices are connected, some of them may not be recognized. A USB device that requires high
power (more than 500mA or 5V) may not be supported. If an over-power warning message is displayed while you are connecting or using a USB device, the device may not
be recognized or may malfunction. If the TV has been no input during time set in The power-saving mode of some external hard disk drives may be released automatically when connected to the TV. If a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read. If a USB device connected to the TV is not recognized, the list of files on the device is corrupted or a file in the list is
not played, connect the USB device to the PC, format the device and check the connection. If a file deleted from the PC is still found when Media Play is run, use the “Empty the Recycle Bin” function on the PC
to permanently delete the file.
Photo, Music, and Movie folders.
USB1 (HDD) port.
Auto Protection Time, the Screensaver will run.
30
English
+ 134 hidden pages